Advances in manufacturing technology : selected, peer reviewed papers from the 2nd International Conference on Advanced Design and Manufacturing Engineering (ADME 2012), August 16-18, 2012, Taiyuan, China
Author(s)
Bibliographic Information
Advances in manufacturing technology : selected, peer reviewed papers from the 2nd International Conference on Advanced Design and Manufacturing Engineering (ADME 2012), August 16-18, 2012, Taiyuan, China
（Applied mechanics and materials, v. 220-223）
Trans Tech Publications, c2012
- : [set]
- Part 1
- Part 2
- Part 3
- Part 4
Available at / 1 libraries
-
Part 1A69500/220400053219,
Part 2A69500/220400053227, Part 3A69500/220400053235, Part 4A69500/220400053243 -
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The studies presented here cover composites, micro/nano-materials and equipment, metallic alloys, steels, polymer materials, optical/electronic/magnetic materials, energy materials and new energy technology, environmentally-friendly materials and waste utilization, biomaterials and preparation technology, thin films, structural materials and earthquake-resistant structures, functional materials, surface-engineering/coatings, modeling, analysis and simulation, materials processing technology, laser-processing technology, mechanical behavior and fracture, tooling testing and evaluation of materials, thermal engineering theory and applications, detection and control technology.
Table of Contents
Preface and Conference Organization
Chapter 1: Bionic Mechanisms, Virtual Manufacturing and Lean Production
Digital Testing Methods of Virtual Prototype and Applied Research Facing to Product
Study on Bionic Principles of the Parasitoid Fly Ormia Ochracea for Sound Source Localization
Human Body and Intelligent Bionic Architecture Design in Electronic Age
Research on Production Cycle Monitoring Strategy Based on Network-Based Manufacturing
Research on KBE System of Intelligent Digital Prototyping Assembly Sequence Planning Based on NX
Study of Lean Production's Impact on Improving Manufacturing Enterprise's Core Competitiveness
Virtual Prototype Construct of Agricultural Tricycle Based on Driver-Tricycle-Road
Study on the Virtual Instrument for Coaxiality Error
Research on the Hybrid Supply Chain of Lean Production and Agile Manufacturing
Studying on the Technique of Integration Analysis to Rigid-Flexible Mixture Virtual Prototyping in Complex Mechanic System
Virtual Manipulation of Eon Studio-Based for High Speed Labeling Machine
Cloud Machining Community for Social Manufacturing
Chapter 2: Remanufacturing and Digital Manufacturing
Numerical Control Remanufacturing for Relief Grinding Machine
Research of Encoding Rules for RFID Tags Used in Automobile Parts Production Line
The Scheduling Frame Research Facing Rapid Response Manufacturing
Study on Repair Techniques of Loader pin Based on Remanufacturing
Performance Examination about the Remanufacturing Engine Crankshaft Based on the "Size Recovery"
PDF417 Barcode and Digital Anti-Fake Technology in Applications of Cigarettes
Chapter 3: System Analysis and Industrial Engineering
AGC Control of Scheduling with Distributing Power Generation and Performance Study
Comprehensive Evaluation Research on Human-Machine Relationship of CNC Machining Center in Furniture Manufacturing
The Operator Workflow Analysis and Skill Standards Determined for Multi-Variety and Small Batch Processing Post
The Occurrence of Special Components in Blast Furnace Slag of Baotou Iron and Steel Company
Agile Intelligent Research of Manufacturing System in Modern Enterprises
Study on Facility Layout of a Manufacturing Shop Based on SLP Method
Study of Location Optimization Scheduling with Multiple Storage Tasks at Container Storage Area of Airport Freight Station
Two-Stage Design for Cellular Manufacturing System
Study on Maintenance Period of Reserve System Based on Markov Process
Research on Simulation Data Management of Complicated Mechanical Product
An Analysis on Wellbore Collapse of Open Hole Completion in Carbonate Formation
Research on the Application of the Fuzzy Control Algrithm in the HAPC System
Research on Energy-Saving for Air-Conditioning System Based on Frequency Conversion Technology
Design of a Resource Scheduling Tool for Production Project Management
Research on Duration Prediction of the Coupled Task Set Based on the Grey System Theory
Research on MP-X Assembly Line Planning Simulation Based on Flexsim
The Balance Problem Solving of the Car Mixed-Model Assembly Line Based on Improved Differential Evolution Algorithm
Chapter 4: Production and Operation Management
The Construction and Performance Evaluation of Internal Control under Network Accounting Information System
Mental Workload Analysis during the Production Process: EEG and GSR Activity
A Quantification Study on Advanced Manufacturing Technology's Social Influence Assessment
Benefit Analysis about Parts Supplier and Bus Factory as Well as Users Based on Game Theory
Quantitative and Meticulous Methods to Aero-Engine Assembly Process
Collaborative Optimization of Replacement and Spare Ordering of a Deteriorating System with Two Failure Types
An Analysis of Structure and Transforming Factors of Tacit Knowledge of Private Science and Technology Enterprise
The Constraints Analysis on TRIZ in Management Innovation Application
Research on Risk Assessment Model of Open Press Blunt Hand Accident
Non-Deterministic Polynomial Application in Financing-Stability Based Manufacturing Production Planning
Sensitivity Analysis of Scheduling Solution for Manufacturing System
Research on Communication Mechanism of Enterprise Network Resource Coordination
A Production Capacity Management Platform Using M2M Horizontal Integration Technology in Connector Industry
Just-in-Time Orders Delivery Mixed Outsourcing Problem
Cat Swarm Optimization-Based Schemes for Resource-Constrained Project Scheduling
An E-Kanban System for Fork Truck Assembly Lines
Analysis for Quick Response Strategy Using OptQuest Simulation
The Impact of Load Reserve Costs due to Significant Installed Wind Capacity in Electricity Market
Multi-Objective Optimization Model of Export and Transit Containers Storage in a Transshipment Port Yard
Modeling of Spare Parts in Multi-Location Inventory System with Unidirectional Lateral Transshipments
Chapter 5: Supply Chain Management
Study on Value of Information Synergy in Steel Closed-Loop Supply Chain Based on Response Time
Research on Pricing Decision of Multi-Level Remanufacturing Reverse Supply Chain Based on Stackelberg Game
Research on the Pricing Strategy of Production Wastes for Supply Limitation Considerations
Bargaining Based Supply Chain Scheduling
Capacitated Supply Chain Operation Optimization of Assembly Manufacturing with Delivery Time Constraint
Analysis of Influencing Factors to Green Supply Chain Based on ISM
Stream-Based Short-Term Demand Forecasting Model Using ARIMA
Research on Coordination in the Closed-Loop Supply Chain with Remanufacturing
Analysis of Influence Factors of the Supply Chain Distribution Center Location Based on the ISM Method
The Supply Chain Management of Manufacturing Enterprises Based on the E-Business Environment
Chapter 6: Advanced NC Techniques and Equipment
Thermal Error Modeling and Compensation of the Direct Driving Type A/C Axis CNC Milling Head
Research for Rectangular Coordinate CNC Pipe Profile Cutting & Welding Integrative Equipment
Research on Non-Linear Parameters Identification for Servo System of CNC Machine Tools
The Geometric Errors Identification of New Methods in Four-Axis Machining Center Axis
Application of UG-Based 5-Axis Linkage Numerical Control Machining Technology in Blow Mold
A Framework for Implementing RFID-Based Cutting Tools Management System in a Machining Workshop
Research of Fault Diagnosis System for NC Machine Tool
Study and Exploration to the Brand Elements of the Numerical Control Machine Tool
Digital Design and Numerical Control Processing of Deflection Yoke Based on Top-Down
Research on Assembly Precision of CNC Machine Tools Considering Characteristic Parameters of Glued Joint
Study on CNC Lathe Electric Turret Fault Diagnosis
The Construction of the Management System of CNC Milling Parameters
Reliability Analysis Using GO Methodology and Grey System Theory
Technology for Eliminating early Failure of NC Machine Tools
Application of Hybrid Fuzzy-PID Control with Coupled Rules in the Hydraulic Positioning System
Research and Practice on the End Face Cylindrical Cam NC Machining Technology
The Dynamic Design of Mechanical Structures of CNC Milling Machine Based on Virtual Prototyping
Construction of Virtual CNC Machining System Based on 3DS and Open GL
Curve CAM Research in Multi Axis NC Machining Technology
Open Architecture of CNC System Based on STEP-NC Data Model
Research on the Cutting Force Induced Error Measurement Method of the CNC Machine Tools
PLC Application in Electrical Control and Fault Diagnosis of Milling Machines
Chapter 7: Industrial Equipment and Engineering
Measurement and Control of the Gas Turbine Inlet Air Cooling System
Application of New Collector RTB in Ilmenite Flotation
Analysis on Operation Principle of Doubly-Fed Wind Power Generator
A Winch Fault Classification Algorithm Based on Cluster Kernel Semi-Supervised Support Vector Machine
Design on High Vacuum System with Molecular Pump
Application Research of Stick-Slip Mechanism on MW Wind Turbine Yaw System
Double-Fed Speed Control System for Wound-Rotor Induction Motor Based on SVPWM Control Technology
Combined PWM Motor Control Study and Application in EPS
Performance of the Elevator Inverter with the Super Capacitor Energy Storage
Model Parameter Identification and Simulation of Ship Power System Based on Recursive Least Squares Method
A Study on Leakage Diffusion of Double-Layer Structure of Oil Storage Tank
Factors Influencing Rope Force of Recoil Starter
Microcontroller-Based Design within the Cone Flowmeter
Design of a Novel HPHT Lubricity Tester and its Preliminary Application
The Significance of Vibration in Concrete Mixing
Research on the Material Tracking Management System in the Magnetic Pump Assembly Process
Design and Realization of Performance Testing System for New Developed Hydraulic Pumps and Valves
Research on the Virtual Test Technique of Tower Crane Jib
Motion Simulation of Mountain High Altitude Work Vehicle Based on UG/Motion
Numerical Simulation on the Inner Flow Field of Ventilator Diffuser and Research on Energy-Saving
Design and Test of Piezoelectric Resonant Diaphragm Air Pump
Design of High Frequency Fatigue Testing Machine Driven by Piezoelectric Vibrator
Restructuring and Analysis of the Overhead Crane's Span
Coal Gas Dehydration Equipment in Combined Cycle Power Plant
Experimental Study on Electronic-Controlled High Pressure Common Rail Diesel Engine Fueled with Biodiesel
The Research on the Launching Consistence of Small Caliber Electromagnetic Railgun
Experimental Study on Diesel Engine Fueled with Different Proportions of Diesel - Methanol Blend
Design, Manufacturing and Pump-down Curve Simulation of High Vacuum Systems
Double-Acting Air-Oil Intensifier Driven by Twin Roller Piston Air Cylinder
Experimental Study on Characteristics of False Defrosting for Split Air Source Heat Pump
Study on the Influence of Meridional Channel to Centrifugal Compressor Performance
Study on Vehicle Stability Based on Coordinated Control of Direct Yaw Moment Control and Slip Rate Control
Integrated Dynamic Characteristics and Application in Semi-Active Dynamic Absorber of Magneto-Rheological Fluids
Research on Fault Diagnosis System for Aircraft Hydraulic Power Carts Based on Fuzzy Diagnosis Theory
Experimental Study on Journal Gas Bearing with Axial Slot for a Miniature Air Turboexpander
Study on Adaptive Dual-Voltage Method to Improve the Control Performance of High-Speed Solenoid Valve
Application Study of Load Forecasting of Central Air-Conditioning System Based on Time Sequence Analysis Method
Research of Product Family Design Techniques of one Workpiece Testing Equipment
Deadbeat Direct Torque Control of Permanent Magnet Synchronous Motor Using Look-up Table
Improvement of DPC of Grid-Connected Inverter for Wind Power System
The Current Situation and Future Prospect of Advanced Human-Machine Engineering's Application in Coalmine
The Evolutionary Potential Prediction Research of the Loader Based on TRIZ
The Application of Roll Forming Technology in the Production of the Crane U Type Main Girder
An Analysis of Mechanical Seal Failure of HTM Pump and its Improvement
Experimental Study of Flow Rate and its Ripple of a Cosine Gear Pump
Modeling of Switched Reluctance Motor Based on Dynamic Fuzzy Neural Network
A Novel Tri-Direction Energy Harvester Using Bimorph Cantilever Structure
Induced Flow Simulation by Means of Low-Temperature Plasma via a Multi-Components Boltzmann Method
The Initial Alignment Method for Low-Cost Strapdown Inertial Navigation System Based on Kalman Filter
The On-Board Measurement of Diesel Vehicle Smoke Intensity System
Structure of Parametric Designing Simulation Platform of Automotive Air Conditioning Condenser
Application Design of Mining Air Compressor's Computer Monitoring System
Torque Converter Pump Wheel's Rapid Manufacturing Based on Stereolithography
Turbine Generator Fault Diagnosis Based on Time Domain Average Laplace Wavelet
Simulation Analysis of Friction Disc Temperature Field of Hydro-Viscous Variable Speed Clutch
Research on New Vibratory Energy Power-Assisted Automobile Hydraulic Steering System
Study on Technology Development of Power System Training Simulator for Modern Ship
Study on Combination of Three and Four Edge-Sealing Based on Reconfigurable and Module for Vertical Bag Packaging Machine
Analysis and Improvement for Structure of the Front Frame of XG958 Wheel Loader
The Research about Mini-Ridging Machine of Tobacco
Modeling and Simulation of Two-Way Quantitative Motor Synchronization System Based on AMESim
Robust Design of 4-Position Motion Generation and Application on Front End Loader
Fault Diagnosis for Large-Scale Wind Turbines
Experimental Study on Fuel Injection Intelligent Control Technology for Hybrid Fuel Engine
Selection Methods of Rational Parameters of Core-Drill Working Tools
Improved Artificial Fish Swarm Algorithm Applied on the Static Model of the Induction Motor Parameter Identification
Characteristics Analysis of Working Mechanisms for Servo Mechanical Presses
Chapter 7: Industrial Equipment and Engineering
Analysis of Rear Window Buffeting Characteristics Using a Production Sedan
Diagnostics of Drum Type Wood Chipping Machines
Experimental Investigation of the Wet Gas Measurement Based on Triple Differential Pressures Method
Research on Fault Feature Extraction Method of the Wind Turbine Gearbox Based on SVD and Improved HHT
Research on the Purifying Performance of Filters to Inhalable Particles
Base on Fuzzy Control of Grid Power Control of VRB Energy Storage System of Wind Farm
Study on Leaning Sensing Device Based on Kerosene Ferrofluid
Study of Relationship between Supercharged Boiler's Furnace Temperature, Radiant Rate and Boiler's Operation Parameters
Design of Temperature Control System Based on LabVIEW
Research of WBS Construction Technology for Large Aircraft Based on Artificial Neural Network
EBD Step-up Control Research during Cornering Braking for Electric Vehicles on High Energy Regenerative Braking/Driving Integrated System
Numerical Simulation of Flow Field in Cylinder of Gasoline Engine
Numerical Simulation of the Nitrogen-Enriched Air Combustion and Emission in Diesel Engine
Wheeled Off-Road Excavator with 2-Dof Articulated Body
A Coupled Method for Dynamic Analysis of Offshore Floating Wind Turbine System
Design of Induction Motor Variable Frequency System Based on DSP
Single Neuron PID Adaptive Control for BLDCM Based on Algebraic Algorithm
Numerical Computation of Temperature in APU Compartment of Passenger Plane
Research on Lightweight Design Manual Piston Pump
Design of an Electric Control System for Plastic Pipe Automatic Conveyor Line
Structural Analysis of 1000MW Ultra Supercritical Boiler's Steam-Water Separator
Experimental Study on Diesel Engine Emission with Mixed Fuel of GDE and Diesel
Research of Wet Gas Experimental Facility with Adjustable and Intermediate Pressure
Simulation Research on Fuzzy Adaptive PID Control of Variable Pump Control System
Numerical Analysis and Optimization Design on Critical Parameter of Plane Four-Bar Linkage for a Crusher
Research Progress of On-Line Quenching Technology and Equipment
Research on Transport Process of the Intelligent Stereo Garage
Analysis Influence of Trailing Edge Modification on Aerodynamic Performance of Airfoils for Wind Turbine
Finite Element Analysis on Working Mechanism of Hydraulic Excavator
Theoretical Design Research for Stirring Device of Fracturing Blender Truck
Chapter 8: Mechatronics and its Application
A Study of Friction and Adhesion Properties of ODS Film on MEMS Device
Intelligent Car Movement Monitoring System Based on LabView
Methods of Planning, Running and Optimization of Material Flow in the Laboratory of Flexible Manufacturing Systems with Robotized Manipulation Supported by No Drawing Production
Design and Implementation of Positioning System Based on Smart Space for Intelligent Wheelchair
Design and Implementation of Electronic Jacquard Cylinder
Application of PID Neural Network Controller on Engine Throttle System
Piezoelectricity-Based Energy Harvesting from Mechanical Vibration
Vehicle-Mounted Satellite Receiver Positioning System Based on the MEMS Gyro
Study on the Dynamic Models of Systems Biology from the View of Engineering
Research on Intelligent Vehicle Steering System via Improved Fuzzy-PID Control Method Based on RSDA
Design of Piezoelectric Actuator Based on Adaptive Projectile
Fuzzy Logic Control Strategy for an Extended-Range Electric Vehicle
Modeling and Improved Switching Control of Hypersonic Vehicle with Uncertainties
Precision Control of Magnetic Drive Actuator Used for Laser Cutting with Compensation of Zero Point of Displacement Sensor
Design and Analysis of a Microgripper Based on Smart Materials
Design and Simulation of Speed Limit Controller Based on Fuzzy Logic Inference
Application of Variable Structure Control Base on Kalman Filter Rearch Law to Electro-Mechanical Actuator
High-Power AC Servo System Identification Research Based on Wavelet Neural Network
Study on Image Sensor Controlling Circuit for Wireless Endoscopic MEMS
Swift Self-Starting Design of Sequential Logic Circuit Based on Karnaugh Map
The Lower Extremity Exoskeleton Coordinated Control Method Based on Human Electromechanical Coupling
The Modeling and Experimental Verification of a Servo-Proportional Valve
Motion Trajectory Tracking Method for Vehicle Steering Based on Dynamic Surface Control
Low-Power Control and System Performance Research for Magnetic Flywheel
Discussions on Dynamic Way to Develop Electric Vehicle Control Method
Sensorless Grey Prediction Fuzzy Direct Torque Control for High-Speed Permanent Magnet Synchronous Motor
MEMS Gyro Random Drift Model Parameter Identification Based on Two-Stage Recursive Least Squares Method
Study of the Multi-Axis Motion Controller Based on DSP
Research on LWD Transmit Circuit Based on DDS Technology
Binocular Vision-Based Measurement for Motion Parameters of Rocket Nozzle
Location System for Micro Medical Device inside Human Body Based on Packet Error Rate Analysis of ZigBee
Weighted Tuning PI Controller for MRAS Sensorless Induction Motor Drive
Experiment and Dynamic Model of Motor for Rotary-Screw-Driven Dispensing System
Research on Control Precision of the Neutron Bandwidth Chopper
Model-Based Fault-Diagnosis of Electronic Throttle System
Chapter 9: Industrial Robotics and Automation
Fin/Rudder Joint Roll Reduction Control System Design
To Achieve Football Interception of Soccer Robots Based on Prediction
Research on the Intelligent Tracking Control System for SPBP
Street Light Monitoring Systerm Based on Zigbee and AC Chopper Technology
Study of Open Numerical Control System Based on DMC Motion Controller
Error Analysis of 6-DOF Welding Robot
Design of the Indoor Golf Robot for Automatic Picking up and Putting the Ball Based on Fischertechnik Model
Study of Dust Sampler System Based on Single Neuron PID
PD-Type ILC Algorithm Research with Forgetting Factor for a Class of Linear Systems with Multiple Time Delays
Mechanical Structure Design of Ontology of the Automatic Line-Tracking Inspection Device Based on Pro/E Modeling and the Kinematics Analysis
Research on Intelligent Controller of Solar Lighting System
A Sliding Mode PID Control with Backstepping for Underactuated AUV in Diving Plane
Dynamic Sliding-Mode Control with Backstepping for Underactuated AUV in Diving Plane
Target Recognition and Features ExtractionBased on ROI and SIFT Descriptors
Design of Automatic Control System for Precision Seeder Test-Bed
Design and Simulation of Soccer Robots and Field Scenarios
Study of Wireless Electricity Acquisition System Based on GPRS for Seawave Power
Vibration-Based Terrain Identification for Planetary Exploration Robots Using Support Vector Machine
The Analysis of the Grid-Connected Phase-Locked Loop Technologies Based on the Transformation of Coordinate System
A Behavior-Based Policy for Multirobot Formation Control
The Calculation System Development of the Quadruped Robot's Workspace on Fixed Pose
Calculation of Large Rigid Body Pose and Technology of Synchronous Coordinating Control for Multi-Axis
The Research of Predictive Control Algorithm for the Three-Tank Water Level System Based on the Multi-Model
Implement of Robot Arm Body Feeling Interaction System Based on the Kinect Skeletal Information
The Design of PID Controller of Turntable Based on BP Neural Network
The Energy Consumption Analysis of Four-Legged Walking Robot by Using Different Motion Laws
The Research of Robot Handheld Intelligent Terminal System Base on ARM9
Application and Simulation of Single Neuron PID in IBVS
A New Multi-Scroll Chaotic Attractors Synchronization Technique
The Research on the Application of Intelligent Robots in Small Storage and Logistics Based on Improved PID Control Algorithm
Design of Teleoperation System of Duct Cleaning Robot
Study of Tobacco-Redrying System Based on Fuzzy PID Control
Synchronizing Fractional Chaotic Genesio-Tesi System via Backstepping Approach
Based on STATCOM in Power Distribution System Design and Simulation
Optimal Design for Clasp Arm of Small-Caliber Deep Well Rescue Robot
Design and Simulation of DC Speed Regulating System Based on Fuzzy Control
Kinematics Analysis of Four-Legged Walking Robots for Grabbing Object
Selt-Tuning Intelligent Control of Hydrogenerator Set Based on Wavelet Neural Networks
Optimizing the Operation Sequence of Chip Shooter Machine Based on the Particle Swarm Optimization Algorithm
Chapter 10: Machine Vision
Application of Improved Canny Edge Detection Algorithm in Coal-Rock Interface Recognition
Edge Detection Combined Local Gray Level Difference and Competitive Fuzzy Logic
The Combination of Local Fuzzy Entropy and Gray Level Difference-Based Thresholding Segmentation
Research on CCD Infrared Image Threshold Segmentation
A Template Matching Method Based on Genetic Algorithm Optimization
Effect of Calibration Grid Size and Position on Machine Vision Measurement
Single Image Haze Removal Based on Dark Channel Prior Applied on Air Duct Robot
Design of Program Framework of Binocular Vision Measurement System Based on DM642
Underwater Dam Image Crack Segmentation Based on Mathematical Morpholog
Research of the Relationship between Measured Displacement and Pixel Displacement of Binocular Vision Sensor
Tracking Multiple Persons under Occlusion Using Appearance Model Based on Attributed Relational Graph
Application of MRI to Monitor the Process of Navel Orange Ripening
Applications of C-V Model without Re-Initialization to Extract Stone Slabs Contour
Research on the Segmentation Method of Rice Leaf Disease Image
A Servo Control System of Dynamic Target Simulation Device for Aerial Camera
Investigation of OpenCV Image Processing Technique Applied in Wind Tunnel Ice-Shape Measurement
Identification of the Hook on Investment Casting Shell Line Based on Machine Vision
Vehicle-Mounted Camera Optimal Setting and Lane Projective Model for Lane Detection System
A Method of Image Restoration Based on Sparse Regularization
A Measuring Method of Flexible Bar Based on Machine Vision
A Study on the Machine Vision Assisted Vibratory Feeding System
Iterative Closest Point Method with a Least Trimmed Squares Estimator
Circles Detection in Images by Using of Coarse-to-Fine Search Technique
License Plate Image Skew Correction Algorithm Based on Geometric Constraint
Image Reduction Method for Rice Leaf Disease Based on Visual Attention Model
Texture Image Segmentation Based on GLCM
Chapter 11: Testing Technology and Equipment
The Application of Information Fusion Technique in the Early-Warning and Forecasting System for Switchbox Fault Arc
Detecting the Crack of Brake Disc of Urban Rail Vehicles
Study on CMP Intelligent Monitoring System of Large-Size Silicon
Modeling and Simulation Based on Ultra-Wideband Pulse Source of Time-Domain Reflectometer
Analysis of Multi-Channel Virtual Temperature Measurement System Hardware Design and its Uncertainty
A Novel Method for the Design of Digital System Fault Diagnosis Instrument Based on VXI Bus
The Graduation Fault Diagnosis Algorithm's Study and Simulation Based on Immune Neural Network and Fuzzy Logic Applied in Complex Industrial System
Sound Radiation Analysis of Thin Plate Using FEM and BEM Method
The Application of Ultrasonic Flaw Detection Technology in the Hydraulic Cylinder Production Process
Performance Analysis of Several Common Filter
Research and Development of an Automatic Test System for Power Supplies
Design and Realization of a Flexible Overland Freight Monitoring System for Hazardous Chemicals Based on Multi -Network
STUDY on the RIA Based Remote Monitoring System
Design and Application of LAN Interface Communication Module
Study on Common Ground Testing Platform Technology for Telemetry Core Equipment
Design of Monitoring System for Mine Emergency System
Research on Desert Soil Moisture Measure & Control System
Pinning Control on Directed Complex Network via Identifying Spanning Trees
Design of Artificial Rainfall Simulator for Model Test of Landslide
Research on Fault Diagnosis Model for Substation with Redundancy Protection Based on Petri Net
Acoustic Source Localization Method with Variable Power in WSN Based on LSSVR Regression Learning
A New Method for Calibrating Digi-Data Input Power Meter
Optical Fiber Temperature Measuring Technology Application Research in Power System
Research on Land Cover Classification for SPOT5
Chapter 11: Testing Technology and Equipment
Measurement of Human Body's Feature Dimensions Based on the National Standards
Study on Earthquake Prediction Based on the BP Network
Study on GPS Ranging Technology for Intelligent Detection of Subgrade Compaction
The Design of a Data Acquisition System for Wave Energy Conversion Efficiency Measurement System
A Design of the Detection End Antenna with the Structure of Double Layers Printed Dipole
Realization of Communication for Automobile Exhaust Wireless Monitoring System
Experiment Studies on Wavelet-Based Damage Detection for Pipeline Using Ultrasonic Guided Wave
Constant Speed Motion Simulation and Error Analysis of Planar Non-Circular Curve Parts
A Design of Circuit and its Application of the Power Frequency Voltage Linear Superposition Method
Test Method of Current Leakage for Dielectric Paste
A Study of Wireless Monitoring early Warning Technology of Goaf Temperature Field
Design of Vehicle Anti-Theft Alarm System Based on DSP-GPS
Fire Alarm System in Residential District Based MCU
Delay Dependent Stability Analysis of Active Power Filter
Design of the Sound Insulation Chamber for Stored Grain Insect Sound Detection
Research of Vehicle Collision Warning System
Control System Construction of Orchard Transport Test Platform Based on PLC
A Support-Vector-Machine Method for Precisely Evaluating Planar Straightness Error
Application of Microwave Technology in the Surface's Water Pollution Monitoring System
Feedback Error Learning for FES Control
Granary Wireless Temperature Monitoring and Alarm System Based on DS18B20
Oil Pipeline Leak Detection System Based on Acoustic Wave Technology
Fault Diagnosis System for Roller Coaster Based on Acceleration Signals
Research on Simplified Slope Measurement in Pneumatic Measurement System for Inner Hole Honing
Research for Automatic Forecasting System of Weighting Rainfall Recorder
Chapter 12: Transmission and Control of Fluid
Applications Research on the Synchronization Control of Multi Hydraulic Cylinders of Dump Truck
Steady Hydrodynamic Force Analysis of Non-Circular Opening Hydraulic Spool Valve
Design of Hydraulic Cylinder Speed Control System Base on High-Speed on-Off Valve
Simulation of Ecological Floating Island Fixation Methods under Different Flow Velocity
Experiment of Artificial Floating Island Displacement Pile Fixation
The Influence of Cross Angle on the Flow Ripple of Axial Piston Pumps by CFD Simulation
Synchronization Control of High Speed Tracked Vehicle with Hydrostatic Drive
Experimental Research on the Expansibility Factor Calculation Model of V-Cone Flowmeters
Study on the Key Factors of Wet Gas Metering Overreading in Standard Venturi Tube Base on DPM
Analysis and Simulation of Inner Flow Condition of a Novel Rotary on/off Valve
Research of Elastic Deformation of Rubber Ink Roller and Ink Flow Characteristics on Two Ink Rollers
Simulation Research on Test Platform of Wave Energy Hydraulic Conversion System in Laboratory Based on AMEsim
Investigation of the Relative Gas Volume in the Discharge Gap when Using Water in Oil Emulsion as Dielectric
Numerical Simulation on the Flow Field in Melt Pump
Experiment of Finger Deformation by Pneumatic Nozzle
Structure Design and Turbulence Simulation of Disaggregation Pipe in Dry Powder Inhaler
Chapter 13: Mechanical Control and Information Processing Technology
Research on Fast Forward Position Solution of Parallel Mechanisms
Kinematic Analysis of a New 1-Translationand 2-Rotational Parallel Manipulator
The Mechanism Analysis and Trajectory Simulation of 5R Joint Manipulator
Kinematics Research on PRP Industrial Manipulator with Cylindrical Coordinate
Application of Gain Scheduled PID Control in the Lithography Positioning System
Analysis of Position for the 4-PUU Parallel Manipulator
A Study on Structure Design of Cable-Driven Picking Manipulator
Motion Planning of Underwater Vehicle-Manipulator System with Joint Limit
Research on Finite-Time Control Method for the Flexible Manipulator
Study and Simulation of AC Motor Vector Control Based on SVPWM
Database Design of Failure Diagnosis Expert System for Combustion Engine
Study on Discrete Particle Swarm Optimization Algorithm
Study on Control Process of Automatic Mechanical Transmission System for Pure Electric Bus
Research on Control Strategy about Synchronous Process for Automatic Mechanical Transmission
Wireless Temperature and Humidity Acquisition System Based on MSP430F5438
The WMSN Routing Protocol Based on Multiple QoS Constraints
Study on Rate Convergence in Distributed Wireless Mesh Network
The Research of Manipulator's Hydraulic Driven System on Fuzzy Immune PID Control
Chapter 14: Sensor Technology
Sensors in the Subsystems of Intelligent Assembly Cell
The Study of Fuzzy Sensor to Environment Adaptability
UAV Sensor Fault Diagnosis Technology: A Survey
Evaluating Sensor Placement for System Health Condition Monitoring
Nonlinear Compensation Method for Transducer Based on Neural Network with Fourier Functions
Design on a Kind of Tension Test Sensor of Saw Wire
Localization Technology Based on Quantum-Behaved Particle Swarm Optimization Algorithm for Wireless Sensor Network
Design and Testing of In-Plane MEMS High-g Accelerometer
Non-Linear Error Analysis of the Variable Pole Pitch Capacitive Sensor
Optimal Design of Magneto-Rhological Damper
Self-Correcting Time Synchronization Based on Cross Layer for Wireless Sensor Network
A New Electromagnetic Field Probe by Using Printed Dipole Antenna
Performance Analysis of Microchip Electrophoresis with Portable UV Absorbance Detection System
Localization from Connectivity in Wireless Sensor Networks Based on Distributed Weight-Multidimensional Scaling
Numerical Simulation and Optimum Design of a Double-Cone Flow Sensor
Study on Leak Detecting System for Oil Pipeline Based on Multi-Sensor Data Fusion Technique
A Micro Pressure Sensor Based on SU-8 Polymer
Temperature Characteristic Optimizations of the RTD Sensitivity for the MEMS Sensor Applications
Temperature Drift Modeling and Compensating of Fiber Optic Gyroscope
Research on Satellite Multi-Sensor Attitude Determination System
Identification Method for Multichannel Multisensor ARMA Signal with Colored Measurement Noises
Research on the Strategy of Multi Sensor Information Fusion in Coal Mine Disaster Scene
A New Type of Nonlinear Viscous Damper
Design on the Amplifier Circuit of Metal-Oxide Semiconductor Gas-Sensitive Sensor
Chapter 15: Embedded System and Integrated Circuit
A Printed CPW-Fed Monopole Antenna with Circularly Polarized Characteristic
Correlation Coefficient Calculation and Simulation in Antenna Diversity
A Laboratory Measurement Method of Antenna Gain
Battery Quick Change System Equipment of Passenger Cars and its Application Mode Research
The Principle Analysis and Research of Power System Converter of Microwave Power Module
A Precoding Scheme Based Game Theory for Cooperative MIMO System
ARM-Based Embedded Visual Processing System
The Realization of Multiple Degree of Freedom Prosthetic Method of Random Target Location in Embeded System
Harmonic Detection Instrument Based on Embedded System
The Implementation of Pipe Climbing Robot's Real-Time Speech Control Based on the Generalized Regression Neural Network in Embedded System
Study on Parameter Determination for ECM Equivalent Circuit
Design of Vehicle Semi-Active Suspension System Control Unit
Influence of Machining Process on Gap-Width Detection in Pulse ECM
A Satisfaction-Based Dynamic Bandwidth Allocation Algorithm for Heterogeneous Wireless Network
Design of the Function Units of Electronic Password Lock
Layered Space-Time Multi-User Detection Based on Kalman Filter
Bonding-Antibonding Ground States Transition in Coupled Quantum Dots
Design and Application of Wireless Mesh Network Based on ZigBee Pro
Performance and Structure of an EMP Simulator
The Research and Implementation of USB Communication Interface Circuit Based on FPGA
Large-Scale Analog Circuit Evolutionary Design Using a Real-Coded Scheme
Design of the Data Acquisition System for Mine's Dynamic Rail Track Scale
Chapter 16: Optoelectronic Information Technology and Systems
A Novel Optical System for Investigation on the Characteristics of Light Emission from Long Plasma Column
Based on Feed-Forward Photovoltaic Grid Converter Control Strategy
Dielectric Barrier Discharge Detection System Based on PMT
Imagine Techniques for Aligning in the Degenerate Four-Wave Mixing Experiment
Research on Test Technology of Intersection Laser Accuracy Optical Target
Review of Recent HV-LED Technology
Study on the Data Processing Technique in High Resolution Remote Sensing Satellite
Study on RoHS Data Integration System Based on Optical Character Recognition
Study of Sampling in CCD Photoelectric Imaging System
Research on Maximum Power Point Tracking Method for Photovoltaic System
Chapter 17: Signal and Intelligent Information Processing
Dimensionality Reduction Method of Training Sample Set for SVDD Based on Statistical Information
Ranking Fuzzy Numbers Based on the Mean and Fuzzy Degree of Fuzzy Number
A New Identification Method for Dual-Rate Wiener Systems
Anti-Synchronization for a Modified Chen-Qi-Like Chaotic System
The Band Width Design of Linear Sweeping Signal in Vibroseis
Study on UWB Channel Equalization with Adaptive Gain Affine Projection Algorithm
Solving the Volterra Integral Equations with Weakly Singular Kernel by Taylor Expansion Methods
AGO-Based Time Series Prediction Method Using LS-SVR
A Correction Method for Time to Digital Converter
De-Noising Signal of Electromagnetic Flowmeter Based on Wavelet Transform
Information Acquisition of Maintenance, Repair and Overhaul/Operations System for Helicopters
Research on the Effect of Polarization on Wireless Communication in a Rectangular Tunnel
Measurement of Dielectric Loss Angle Based on Wavelet Threshold Denoising and Least Squares
Reliability Assessment Using Fuzzy Evidence Theory
Information Modeling and Implementation of Mold Enterprises Based on Teamcenter System Management Platform
Analysis on the Differences among the Characteristics of Imaging in Subdivision Bands of Mid-Wave Infrared
Optimal Approximate Solution of a Class of Matrix Equation
Time Scale Variation of the Yellow River Ice in the Inner Mongolia Section Using Wavelet Analysis
Synergetic Multi-Semantic Multi-Instance Learning for Scene Recognition
Dual-Butterfly Parallel Access Constant Geometry Pipeline Radix-2 FNT Algorithm
Image Registration Based on Mutual Information and Harris Corner Points
Object Annotation Based on Middle Semantic Manifold
Motion Compensation Based on Keystone Transform and Wigner-Hough Transform
Object Remarkable Features Extraction Strategy Based on Imagery Conceptual Network
BOU-Based Cycle Determination for Different Kinds of Mechanical Vibration Signals
An Effective Method for Combining Kernels with Class Separability
Feature Extraction of Nonstationarity Vibration Signal Based on Wavelet Decomposition
Harmonic and Inter-Harmonic Detection Based on FFT and Nonlinear Optimization
A Uncorrelated Multi-Sources Dynamic Random Load Identification Algorithm Based on Least-Squares in Frequency
Research of Electronic Nose Pattern Recognition Algorithm Based on SVM
A Novel Baseline Correction Algorithm
Application of Improved Wavelet Threshold Method in SEMG De-Noising Processing
Study on Quasi-Synchronous DFT Algorithm
Rational Function Functional Networks Based on Function Approximation
Retarded Integral Inequality and its Application in Retarded Differential Equation
An Algorithm for Salt and Pepper Noise Removal Based on Information Entropy
Study on Data Fusion Algorithm in High Dynamic GPS/INS Integrated Navigation System
Active Shape and Active Apparent Hybrid Model of Human Facial Feature Points Localization Algorithm
A Targets Detecting Approach in the Dynamic Background
Chapter 17: Signal and Intelligent Information Processing
Study of Signal Transmission for SIP and POP
Signals Modulation Recognition Based on Efficient Attribute Reduction with Neighborhood Rough Set
ELECTRE Method Based on Interval-Valued Intuitionistic Fuzzy Number
Contour Reconstruction Based on Non-Closed Contours
An Integrating Method for Information System Based on CCM
Chapter 18: Computer Applications in Industry and Engineering
Design and Implementation of Cloud Storage Security System
Parallel Solutions for Node Connectivity Based Mesh Moving Methods on Different Parallel Architectures
Research on Key Techniques of Virtual Arthroscopic Knee Surgery Training System
The Technology Research Based on Least Square Method for Extracting Quadric Surface
A Genetic Algorithm for the Optimization Problem of Highway Maintenance Equipment Arrangement
Fuzzy Co-Evolutionary Genetic Algorithm and its Application in Clinical Nutrition Decision
The Developing of Algorithm for Learning Programs in the Adaptive Learning System
One-Way Function Construction Based on the MQ Problem and Logic Function
A Model for E-Government Information Resource Integration Based on Ontology
Design of Image Retrieval System Based on Speech Recognition
Research and Design of Ceramic E-Commerce Dual-Channel Collaborative Distribution System
Study on Information Systems Development and Structural Optimization of Agricultural Products Multimodal Transportation
Anomaly Intrusion Detection Based on Concept Lattice
Artificial Glowworm Swarm Optimization Algorithm for Solving Multi-Objective Constrained Optimization
The Research on Grid-Based Contour Tracking Method
Pre-Split Anti-Collision Binary Tree Algorithm
Topic Crawling Strategy Based on Wikipedia and Analysis of Pages' Similarity
Video Clips Classification with Hierarchical Approach
An Improved OFDM Timing Synchronization Algorithm
The Researching on Evaluation Analysis Model about Student's Study Quality Based on Web
Parallel Implementation of Single-Source Shortest Path Algorithm Based on Haloop
The Analysis of Different Head Shape's Projectile Penetration Characteristics
Numerical Study on Influence of Grid Density to Aerodynamic Characteristics of Typical Transport Configurations
An Improved Object-Based Video Segmentation Method
Large-Scale LOD Adaptive Terrain Rendering
The Realization of the International High-Speed Private Network Based-on HS-TCP Protocol in the Fusion Research
An Algorithm Subdividing the Intersection Triangle for Realizing Boolean Operations of STL Models
Flood Disaster Evaluation Based on Improved BP Neural Network Model
Digital Modeling and Movement Resolution of Rubber Band Analogy for 2D Packing Problem
Projects Improving QoS of the Voice Real-Time Data Based on IP Network
The Design of "The Use and Maintenance of Common Digital Products" Popular Science Website
Analysis of Statistics Data Based on Mixed Visualization Techniques
Remote Experimental Teaching and Learning Platform Based on Internet
Spectrum Comparative Analysis of the Frequency Domain Complex Cole-Cole Mode
Design of SAAS Model-Based System of Exhibition Management
High Accuracy of Finite Element Method for a Class of Nonlinear Hyperbolic Integral Differential Equation
A Kind of Intelligent Client Flow Engine Based on Ajax
Peano Space Filling Curve Applied in Managing P2P Service Resources
A String Approach for Dynamic XML Document
Study on Mechanical Equipment Fault Diagnosis System Based on Cloud Computing
Automatic Identification of Features from CAD Models Based on STL Files
Research on Construction Methods for Network Covert Channels Based on HTTP
A Rough Set Based Approach to Knowledge Acquisition for Product Service System Configuration
Classification of Student Achievement Using ID3 Algorithm
Network Traffic Prediction Model of the New Elman Chaotic Neural Network
Research on Digital TV Anonymous Authentication
Study on the Establishment of Land Information Management System
The Research on Optimization Neural Network Structure Parallel Genetic Algorithm
Object Oriented Method in Information System Design
An Efficient Iterative Method with Order of Convergence Seven for Nonlinear Equations
An Effective Load Balancing Algorithm for Structured P2P Networks
An Efficient Sixth-Order Convergent Newton-Type Iterative Method for Nonlinear Equations
A New Chaotic Image Scrambling Scheme Based on Spatial Bit-Level Map
Development of On-line Computer Maintenance Management System for Plastic Injection Machine
The Empirical Study for a Relationship Model in Software Development
A Method for Traffic Collision Detection
Location Analysis and Simulation of one Kind 4D Stereoscopic Gaming Platform
An Approach to Diminish Boundary Distortion in Compressing Grid DEM with Discrete Wavelet Transform
Exploration of a Calculation System of Drawing Quantity with "Read Schemata"
Compression of Multi-Resolution Terrain Data Based on Binary Tree
A Computational Experiments Mode for the ERSNWTP Configuration and Scheduling
Book Subscription System Design in High School Based on Web Technology
New Ideas for the Development of Undergraduate Management Information System
A New Registration Method for Mixed Augmented Reality Environments
A Computer Controllable Microwave Signal Generator for CPT Atomic Clock
An Accelerated Iterative Method with Third-Order Convergence
Research on Fire Disaster Fire-Fighting Simulation System of Large-Long Tunnel
The Cluster Analysis of Multivariable Panel Data and its Application
Usage of IEC Standards for Distributed Control Systems Modelling
An Integer Programming Optimization Model of Container Shipping of Sea-Carriage
Contourlet-1.3 Texture Retrieval Algorithm by Sub-Bands Energy and Consistency
A Self-Relocation Based Method for Malware Detection
Explore Medicine Using Compression and Partial Least Square Discriminate Analysis Method
The IC Card Data Encryption Research Based on the AES Algorithm
Practices of XML-Based Parametric Design and Remote Design
Research on Optimization of SQLite Indexing Mechanism Based on Red-Black Tree
Numerical Simulation on Comparison of Air Flow Distribution with Different Algorithms
The Study of Image Processing Method Based on OpenCV and USB Industrial Camera
Freeway Traffic Density Control Based on CMAC
An Improved Random Number Generator Based on Chaotic Map
Efficient Certificate-Based Blind Signature Scheme without Bilinear Pairings
Research on CAD/CAE Information Integrated System Based on Web Services
Design and Implementation of IT Operations and Maintenance System for Chinese Universities
The Compliance Research of RoHS Based on XUL and Java RCP
MAP Based Super-Resolution Image Reconstruction Method
Forecasting Model Based on Improved Grey-Markov
The Design and Implementation of a Website Internal Search System Based on Sphinx
The Prediction of Energy Consumption in Henan Based on Genetic Neural Network
Reinforcement Learning for Routing Strategy Considering the State of Network Link
Preliminary Study on CAD of Removable Partial Denture Framework
Research on Formal Modeling Based on CPN for Movement Authority of High-Speed Railway CTCS-3
Study on the Development and Application of osgART Based on MFC
A Multi-Scale Data Fusion-Based Method for Modular Decomposition
The Realization of FPGA + ARM-Based Image Matching
The Research of Collision Detection Based on OBB in Vega Prime
The Modeling and Simulation of Load-Acid Buttery on Principal Component Regression
Cooperative Genetic Multi-Objective Optimization Algorithm and Application
Coal Mine Electromechanical Equipment Online Management Platform Development Based on Web
Decision Tree-Based Selecting Talents Schema
A Novel Edge Detection Approach Based on Soft Morphological Operations
Frequency Calibration System Design Based on FPGA
Study on webGIS Traffic Engineering Archives Management System
Real-Time Simulation of Dynamic Cloud Based on Fractal
Composite Evolutionary Algorithm for Constrained Optimization
Study of Active-Learning-Based Theme Crawling System
A New Algorithm for the Boundary Representation of Octree Model
Study on the Method of 3D Geologic Modeling and Visualization
Three-Dimensional Modeling of Stratified Geologic Body and Application
A Novel ID-Based Strong Designated Verifier Signature Scheme
Implementation of Ladder Diagram Edit Module of Soft-PLC Based on MDI Application
UML-Based Full Function Point Measurement Method
Hyperspectral Images Terrain Classification Based on Power Transformation
The Design and Implementation of the Trojan Horse Based on Kernel Hacking
The Development of Brake Three-Dimensional Parts Library Based on CATIA
Rotation Distortion Invariant Image Recognition Based on Fractional Correlation
Design of PDF4172D Barcode Watermarking System Based on SOPC
Slope Stability Comparatively Analyzed with 2D and 3D FEM
Study on Communication Process in Enterprise Network
Querying Deep Web Based on User Query Schema
Weight Adjustment Technique in the Deep Web Data Source Classification Applied Research
Design and Implementation of a Secure Integrated Storage Network for Classified Information Based on IPSAN
Development of Intelligent Pattern for Modeling a Parametric Program for Public Space (Case Study: Isfahan, Mosalla, Iran)
Retrospective Research: Analysis of Liver 31P Magnetic Resonance Spectroscopy Combined with Support Vector Machine
A Resource Discovery Mechanism on Cloud Computing System
VLAN Technology Application Research Based on Campus Network Security
Study of Digital Campus Construction and Application
Study on Campus Network Security and Protection Technology
Dynamic Visualization of Urban Changes Based on Flex
The Strong Prime Numbers Generation Algorithm Based on Genetic Algorithm
Survey to Automobile Electromagnetic Compatibility Simulation Software
Chapter 19: Biological Information Technology
Micro-Macro Modeling for Systems Biology with MR-DEVS
New Spectral Indices as Indicators of Carotenoids Content
Using DNA to Solve the Minimal Vertex Covering Problem
Biorecognition on the Surface of Patterned Silicon/Silica and Gold/Silica Slide
Phylogenetic Analysis of Genes Related Nitrogen Fixation in Lotus japonicus
Chapter 20: The Internet of Things
The Security Mechanism for Internet of Things Networks
A Framework of Smart Supermarket Based on the Internet of Things
Application of the Internet of Things Technology in the Intelligent Park
The Research and Implementation of TCP Measurement Technology
Structure Design and Dynamic Characteristics Analysis of the Cartesian-Coordinates Automated Warehouse
Smart Part with Internet of Things Technology
The Research of Clothing Identification Based on RFID Technology of IOT
Chapter 21: Other Related Topics
Research on Influencing Factors of Enterprise Network Resource Coordination
Study on Index System of Enterprise Network Resource Coordination Maturity Evaluation
Application of the Level Set Method for Propagation of Small Curvature Bending Detonation Wave
An Empirical Study on Organization Design for Traditional Manufacturing Industry
Research on Manufacturing Resource Domain Ontology Modeling Method
The Research of Special Laboratory Timetable Algorithm and Solving Conflicting Method
Construction of Analog Electronics Course Design a Study of Quality Control System
by "Nielsen BookData"
