Advanced research on civil engineering and material engineering : selected, peer reviewed papers from the 2012 International Conference on Civil Engineering and Material Engineering (CEME2012), August 25-26, Wuhan, China

Author(s)

    • International Conference on Civil Engineering and Material Engineering
    • Zhang, Helen
    • Jin, David
    • Zhao, X.J.

Bibliographic Information

Advanced research on civil engineering and material engineering : selected, peer reviewed papers from the 2012 International Conference on Civil Engineering and Material Engineering (CEME2012), August 25-26, Wuhan, China

edited by Helen Zhang, David Jin and X.J. Zhao

(Advanced materials research, v. 568)

Trans Tech Publications, c2012

  • : pbk.

Available at  / 1 libraries

Search this Book/Journal

Note

Includes bibliographical references and indexes

Description and Table of Contents

Description

Volume is indexed by Thomson Reuters CPCI-S (WoS). These are the proceedings of the 2012 International Conference on Civil Engineering and Material Engineering (CEME2012), August 25-26, Wuhan, China. The 90 peer reviewed paper are grouped as follows: Chapter 1: Material Application and Structure in Civil Engineering; Chapter 2: Mechanics Research in Civil Engineering and Material Engineering; Chapter 3: Environmental Material and Civil Engineering; Chapter 4: Material Engineering and its Application Technology.

Table of Contents

Preface and Committees Chapter 1: Material Application and Structure in Civil Engineering Literature Review of Precast Concrete Frame Structures in Civil Engineering Experimental Study on Fire Resistant of Shield Tunnel Segment in Civil Engineering Study on the Pyrolysis Kinetics Characteristics of the Wood from the Ancient Buildings Practical Research on Desulfurization in Converter with the Analysis of Sulfur in Steel for Civil Engineering An Analysis on Engineering Properties of Peaty Soil in Kunming Civil Engineering The Microstructure and Performance Analysis of HRB400 Rebar Manual Arc Welding Joints with Rebar Materials in Civil Engineering Analysis of Soil Moisture Characteristics with the Application of Soil in Civil Engineering in 2011 in Gaoyao Study on Indoor Thermal Environment with Building Materials of Urban Residences in Zhejiang Region: Summer Investigation Analysis of Two Cross Arm of Reactive Powder Concrete Pole Design with Structure Materials in Civil Engineering Research on Material Properties and Heat Treatment of Clamping Blocks The Current Situation and Analyze of Huizhou Traditional Architectural Components and Materials to Repair Alternative Techniques Synthesis of an Intumescent Flame Retardant and its Application to Fireproof Coatings of Steel Structures Contrastive Analysis on Limitation Span between Suspension Bridge Using Steel and CFRP Cable The Research about Plastic Cement Playground and Constructed Materials Simulation and Analysis on Supporting System of Composite Soil Nailing Technology in the Process of Digging Exploration of the Strategies in Civil Engineering to the Safety Evaluation and Reinforcement Technique of Wood Structure of Ancient Architecture in Huizhou Structural Design on a Building Stair by Folded Steel Plates in Civil Engineering Test of Solidification Characteristics of Grouting and the Effect on Strata Deformation in Shield Tunnelling Seismic Damage Analysis and the Study of Reinforcement Measures for RC Frame Structure Building in Civil Engineering Influence of C/N Ratio on SND and Microbiological Analysis in Catching Bed Biofilm Reactor Using Acrylic Resin Fiber as Carrier Materials in Civil Engineering Study on Reconstruction of Elevation Structural Shape for Historic Industrial Buildings in Chinese Civil Engineering Bored Pile Settlement Analysis of Pile End Grouting in Civil Engineering Study on Parameter Optimization of Copper Smelting in Civil Engineering Cantilever Construction Optimization of Cable-Stayed Bridge with Hybrid Bridge Deck System and Building Materials in Civil Engineering Study on the New-Style Building Materials in Civil Engineering - Architectural Sandwich Panel and its Application Chapter 2: Mechanics Research in Civil Engineering and Material Engineering Study on the Resistance of Structural Optimization of Pipeline Elbow in Civil Engineering Finite Element Analysis of Dual-Angle Variable of Four Steel Angle Composite Joint with Steel Materials in Civil Engineering Effect of the Inhomogeneity of a Substratum Soil on Longitudinal Settlements of a Shield Tunnel The Detection Research of Tension about Vertical Prestressed Fine Rolled Twisted Bar in Box-Girders Construction of Civil Engineering The Dynamic Analysis of Concrete Pump Truck Arm in Civil Engineering Research on the Methods of Determination of Characteristic Strength of Brittle Rock Materials in Compression Test Effect of Dynamic Loading on Mechanical Properties of Concrete Typical Calculation Method of Stress Intensity Factors and Crack Growth Criterions on Infinite Plate Containing Hole-Edge Cracks Study on Determining Method of Rig's Hydraulic Pressure in Civil Engineering Effect of Variant Water Pressure Loading on Soil Improvement by Vacuum Preloading Technique in Civil Engineering The Research of Pure Bending Flanged Beam's Stress Distribution in Civil Engineering Analysis of Load Transfer Mechanism with Rock-Soil Anchoring Technology in Soil Tension-Type Prestressed Anchor for Civil Engineering Calculation of Water-Soil Pressure of Silt Layer in the Foundation Pit Considering the Seepage Effect Analysis Research Progress on the FRP Reinforced RC Beam-Column Joints in Civil Engineering Material Mechanical Performance about Worm Bending and Twisting Deformation for Civil Engineering The Fractal Research of 16MnR Steel Fatigue Fracture after High Temperature Mechanics Behavior Analysis of K Type Flashboard Node of Transmission Tower in Civil Engineering Study on the Effective Slab Width of Composite Cable-Stayed Bridge under Axial Force Research and Realization of Air Leak Test System in Civil Engineering Based on Virtual Instrument and Equipment Materials Analysis and Depiction of the Dynamical Characteristic of Burning Zone Temperature in Rotary Kiln of Cement Material Production The Design of Disc Brake for Mine Hoist in Civil Engineering Numerical Analysis of Shear Stress on Adhesive Joint between FRP and Steel Structure in Civil Engineering The Safety Analysis for Underground Tunnel of Civil Engineering by the Stress and Deformation of Rock Mass Material The Anisotropy Characteristic of Rock Material Described by the Stress Softening Criterion in Civil Engineering Material Stress Analysis of Hydraulic Support in Deeply Inclined Top Coal Caving Face Based on Virtual Prototyping Technology Meso-Damage of Emulsified Asphalt Concrete Based on CT Test under Continuous Uniaxial Compression Simulation of the Cracking Behavior for Fiber Reinforced Composite Materials with Different Inclusion Quantity Research on Influence of the Bank Slope on the Acceleration Distribution of the Central Points of Concrete-Faced Rockfill Dam Chapter 3: Environmental Material and Civil Engineering Study on the Thermal Properties of the Wood from the Ancient Buildings Finite Element Analysis on Contact Surface Slip of Profiled Steel Sheet and Composite Slab A PCR-DGGE Approach to Evaluate the Influence of Environment Materials for Civil Engineering-Different Carbon Sources on a Catching Bed Biofilm Reactor in Start-up Phase Discussion on Green Building Materials Study on Energy Material Application in Changchu City for the Low-Carbon Economy Development Chapter 4: Material Engineering and its Application Technology Impact of Degree of Polymerization Combination on Structure and Properties of Cellulose Membrane Effect of NaH2PO4, Na2HPO4, MgSO4, and Ascorbic Acid on Survival of Lactobacillus acidophilus during Freeze-Drying Effect of some Materials on Growth of B. longum and B.adolescentis The Flame Retardant Synergism between Cobalt Complexes and Ammonium Polyphosphate in Cottonwood Study on Interface Failure of Propellant and Liner Material with Mechanics Analysis Study on Synthesis and Characterization of AgCl Microparticle Materials Based on One-Step Solution Phase Route Synthesis and Antioxidant Behavior of Carbon-Coated Copper Nanoparticles Influence of Heat Treatment on the Magnetism of Carbon Coated Iron Nanoparticles Preparation and Performance of Porous Silica of Sound-Absorbing Coating Finite Element Analysis of Creep Behavior of AZ91D Magnesium Matrix Composites Reinforced with Aluminum Silicate Short Fibers Aluminum Alloy Plate with a Hole Fracture Experiment and Numerical Analysis TiO2 Nanotubes of Inorganic Functional Materials Research Progress Analysis of Inclusion Microstructure in Material Engineering of Steel Combustion Process's Kinetics Study of Biomass and its Cellulose Based on Biomaterials in Material Engineering Study on BaO-Bi2O3-B2O3-SiO2 Glasses in Material Engineering with Electronic Polarizability and Optical Basicity Research on Oxyfluoride Glasses in Material Engineering with Optical Basicity and Electronic Polarizability Study on Lanthanide Oxides Materials in Material Engineering with a New Method Analysis for Modeling of Molten Carbonate Fuel Cells Material Characteristics Growth Mechanism and Characterization of Porous CuS Microspheres The Synthesis and Characterization of ZnO-Tubular Nanostructures Selective Synthesis and Photocatalytic Activity of PbTiO3 Nanoparticles with Different Crystal Structures Study on Combustion Characteristics of Impurity Coal Based on TG-DTG-DTA Preparations and Photocatalytic Properties of Visible-Light-Active Nitrogen-Doped TiO2 PVD Preparation Process of (TiN + CrN) / CrAlN Superhard Nanocomposite Multilayer Coatings The Application of Carbon Fiber Reinforced Material in Sports Equipments Photophysical Properties and Performance of Semiconducting Block Copolymers Preparation, Characterization and its Photocatalytic Performance of Rare Earth Element Erbium Doped with TiO2 Material Characterization of Poly(paraphenylene vinylene)-Polystyrene Block Copolymers in Solution Influence of Molecular Structure on Properties of Polycarboxylate Superplasticizers Hydration Activity of Ceramic Polishing Powder at Autoclaved Condition Rheological Characteristics on Solution of NMMO/Cellulose with Different Degree of Polymerization and its Combination Preparation and Thermosensitivity of Poly(N-Isopropylacrylamide) Hydrogels with Graded Structure

by "Nielsen BookData"

Related Books: 1-1 of 1

Details

Page Top