Green power, materials and manufacturing technology and applications II : selected, peer reviewed papers from the 2nd International Conference on Green Power, Materials and Manufacturing Technology and Applications (GPMMTA2012), July 17-19, 2012, Kunming, China
Author(s)
Bibliographic Information
Green power, materials and manufacturing technology and applications II : selected, peer reviewed papers from the 2nd International Conference on Green Power, Materials and Manufacturing Technology and Applications (GPMMTA2012), July 17-19, 2012, Kunming, China
（Applied mechanics and materials, v. 214）
Trans Tech Publications, c2012
- : pbk.
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
These are the proceedings of the 2nd International Conference on Green Power, Materials and Manufacturing Technology and Applications (GPMMTA2012), held in Kunming (China) on July 17-19th 2012. The conference served as a platform for the exchange of expertise, and drew the attention of researchers from the disciplines of Sustainable Power, Sustainable Materials, Green Manufacturing Technology and Applications, etc.
Table of Contents
Preface, Committees and Reviewers
Chapter 1: Materials Engineering and Application
Ethanol and Diesel Fuel Mix the Preparation and Physical and Chemical Properties of Research
Molecular Dynamics Simulations of the Glass Transition Temperature of Amorphous Cellulose
Preparation and Properties of Shape Memory Epoxy Resin Composites
Granulation Technology Experiments of Novel Mesoporous Composite Water Purification Material
Controlling Factors of Hydrocarbon Accumulation and Optimization of Favorable Blocks for Both Flanks of Putaohua Reservoir in Southern Daqing Placanticline
SEM Image Processing of PP/Rice Husk Composite Using MATLAB
Study on Organic Montmorillonite Modified Recycled Optical-Grade Polycarbonate Nanocomposite
High Performance Concrete in Highway Bridge in Cold and Arid Regions
Heat Treatment Process of the Flue Gas Desulphurization Gypsum and its Influence on the Properties of Cement
Chapter 2: Mechanical Engineering and Application
Research on Material Features in Design Technique of Tennis Materials
Scheduling Optimization for Parking and Taking Car about the Vertical Circulation Type Stereo Garage
Intelligent Information Processing Based on Classical Logic and Applied Mechanics
Casing Drilling Technology to Drilling Site
Basic Process of the Performance Test of the Turbine Generators
Integrated Nine-Switch Power Converter Based on Discontinuous Pulse-Width Modulation
Research of Flow Field and Temperature Field in 2D Annular Space of Air-Gap
Heat Storage Performance of Heating System of Phase Change Heat Storage
Analysis of the Multi-Tooth Meshing Effect of Three-Ring Gear Reducer
Demodulation Method of Distributed Fiber Bragg Grating Sensor Based on Whispering Gallery Mode Optical Microcavities
Experimental Study on Anti-Fatigue Damage Structural Design of Diesel Engine Bearings
Numerical Simulation of Partial Cavitating Flow of 2-D Hydrofoil in Viscous Flow
Cardiac Motion Estimation with Coronary Angiographic Image Sequences
Effects of Coefficient of Excess Air on the Combustion Performance of Marine Two-Stroke Diesel Engine
Solutions of Optical Transmission Analysis
Study on the Methods of Measuring Magnetic Field
Study on Wear Behaviors and Grain Effects of PCD Cutting Tools in Turning Granite
Condensing Heat Recovery of Existing Large-Scale Refrigeration System
Integrated Instrument Based on SOPC
An Improved Wavelet Threshold Denoising Method for Transformer Partial Discharge Signal
A Research on the DC-Link Current and Capacitance of the Static Excitation Regulator on a 12/3-Phase Dual Stator-Winding Induction Generator
Application of Rigid-Flexible Coupling in Stiffness Calculation of Double Wishbone Suspension
Dynamics Analysis and Vibration Suppression of a Flexible Rotation Beam
Juice Extractor Stent Plastic Mould Structure Design
Research of Multi-Channel Hygrothermoscope Acquiring System
Generation of High Intensity Sound by Random Vibrations
Multiple Targets Passive Localization Technology Based on a Tolerant High Resolution Algorithm
Research of Sound Transmission Loss of Aircraft Sidewall with the Resonators
Research on Mechanical Wind Machine of Constant Velocity
Realization of the Viterbi Algorithm in MLSE with Intersymbol Interference
Optimization of Control Parameters with Switching Operation Mode on Hybrid Brake System for Electric Vehicles
Applied Mechanics-Based Devices in Mobile Human-Computer Interaction
Influence of Thermal Distortion of Mirrors in Laser Resonators on Laser Modes
Lens Design with Silicon Wafer for Terahertz Wave Transmission
Precise Time Measurement Using CTMU
Based on Image Procession to Measure Flame Emission Characteristic and Radioactive Properties
Study on Influence Factors of NMR T2 Spectrum Inversion
Analysis of High-Speed Energy-Storing Flywheel Rotor
Leakage Failure and Principle of Underground Low Voltage Grid
Research on the High Leakage Reactance of the Superconducting Controllable Reactor
Chapter 3: Structural and Civil Engineering
Research of Practice-Based Design in Building Construction II
Effect of Corrosion on Mechanical Properties of Reinforcing Bar HPB400
Study on Precast Slab Track for Taiwan High Speed Rail
Block Sand Mechanism Experiment and Analysis of Vegetation Flexible Dam
Study on the Deformation Characters of the Coal Roadways with Compound Rock Strata and Water Spraying Roof
Calculation Method of Upgrade and Side Strengthening Old Bridge Based on Applied Mechanics
Experimental Study on Double Truss Cable Supporting System of Coal Roadways in the Isolated Coal Pillar and Fold Region
Application of Fracture Prediction and Modeling Technology in Tight Sandstone Gas Reservoir in Xinchang Gas Field of Sichuan Basin
Prediction Scheme of Torsional Strength of Reinforced Concrete Beam
Study on Composite Slab Structure
Research on Stability Bearing Capacity for Pole and Tower Compression Members with Two Legs Connection
On 3-D Modeling CAD System of Production Platforms
Subway Station Seismic Structure Dynamic Model
Study on In Situ Shearing Strength Test for the Retaining Wall Bottom in a Bank Revetment Project
Study of Light Pollution about Night Landscape Lighting
On Visual Aesthetic Feeling of Microlite Decorating Plate
Green Industrial Buildings Lighting Design Based on DIALux
Research of Green Concrete
Chapter 4: Manufacturing Technologies and Application
Control Methods of the Concentrated Moisture Exhaust System for Tobacco Primary Processing
Effect of Microbiological Additive on the Diversity of Microbial Community and the Dynamic Distribution during High-Temperature Composting Process
An Experimental Study on Edge-Breakage of Explosive Parts in Machining Using Micro-Photographic Observation Method
Coal Gangue Image Edge Detection Based on Wavelet Transform
Mercury Processing in PVC Production
Numerical Analysis of a New Type of Oil Boom with Diversion
Research on Wood Drying Technology Based on Mechanics
Influences of Heat Treatment on Spinning Process with Large Thinning Rate and Performance of 30CrMnSiA
Experiment System and Test Technology of Oil Fire and Explosion
Analysis on Monitor and Experiment of Blasting Vibration for Sijiaying Iron Mine
Mining Method of Macheng Iron Ore
Power System with Wind Power Connection Anti-Peak Regulation Ability Analysis
Effect of Different NPK Fertilizers Cooperating Application on Yield and Quality of High Starch Maize
Power Transmission and Transformation Project Using Analytic Network Process
Effect of Co Concentration on Composition and Electromagnetic Shielding Properties of Ni-Co-P
Numerical Simulation of Eddy Air-Curtain Dust Controlled Flow Field in Hard Rock Mechanized Driving Face
Effects of Beipiao Wind Power Development Planning on Local Birds Ecosystem
A Parameters Optimization of the CO2 Laser Drilling Process for HDI Microvia Fabrication
Nano-Machining Polishing Method on Metal Materials
Quality Control Measures of Concrete Work
City Power Grid Planning and Coordination Mechanism
Multidimensional Grey Evaluation Method for Aeronautic Electronic Components & Devices Selection
Risk Assessment of Error Forgetting and Omitting of Manufacturing Controller
Green Agricultural Products Supply Chain Management Mode under Low Carbon Economy
Research on Active Aided Knowledge System Push-Pull Technology Oriented the CAPP
Tech-Application for Excess Energy Supplement to Cut Cost in Pump Station
Optimizing and Simulating Production Line Balance Based on Human Factors
Facility Layout Model of Production Line Based on Operation Comfort
Research on the Green Building Revolution - Solar Energy Research and Development in Taiwan
AP1000 Nuclear Reactor and Primary Loop Modeling Based on Relap5-3D and 3Keymaster Simulation Platform
Experimental Study on Influence Function of Particle Size at Low-Temperature Oxidation of the Coal
Improved Phosphate Ore Leaching with Physical Mutagenized Acidithiobacillus Ferrooxidans Based on Modified Logistic Model
Chapter 5: Control, Monitoring and Computer Technologies
Research on Optimization Control Strategy for Limiting Short-Circuit Current Based on Fuzzy Quantitative Control
Study Based on TMS320F2812 Synchronous Generator Field Regulator
Intelligent Monitoring Design and Research of Modern Instrumentation Failure Alarm
Research of Data Server Application Software for NBI Mechanical Control on EAST
Mechanics Performance of Elevator Monitoring System Based on GPRS and ZIGBEE Network
A Information Management Methods Design of Mechanical CAD Drawings
Remodeling and Texture Mapping for Rule Polyhedron Based on Open Scene Graph
Mine Detection Technology in Mine Safe Production
Study of Mechanics Control Server Application Software on EAST-NBI
Optimized RBF for CBR-Recommendation System
Stability Property of Uncertain Networked Control System with Random and Bounded Delay
Transfusion Monitoring and Controlling System Based on Wireless Communication
Metadata Caching Subsystem for Cloud Storage
Research on Two-Speed CAN BUS Technique in Automobile Manufacturing System
Research of ISIC-CDIO Question Answer System for Materials Teaching Based on Android
Research of Decision Support Technologies in Multi-Dimensional Data Environment
Research of Mine Wireless Video Monitoring Sub-Station Based on WIFI
Preconditioned Symmetric Linear BCG Method for Solving FEM Electromagnetism Problems
Spatial Analysis Model for Agricultural Land Grading Based on GIS
Research and Implementation of Multi-Bus Converter Based on Intelligent Sensor
Design of Wireless Power-Meter Reading Data Collector Based on CC2430
Application of Three Order Cumulants in Fault Diagnosis
Review on Application Research of Multi-Agent Theory in Industrial Process Control
A Simulation Research of Artificial Intelligence Control
Flowers Temperature and Humidity Control System Based on Applied Mechanics
Digital I/O Training Kit Development for Arduino Platforms
Application of Modular Design in the Intelligent Building Product Designing
Research on Wireless Alarming System of Transformer Substation
Study of Physics Experiment Teaching System Based on Virtual Reality Technology
Correction Algorithm of USB Touch Screen Driver in vxWorks
Plate Production Line Automation Control System Based on Automatic Gauge Control
Constant Low Speed PLC Control System of GKD3B Locomotive
A Family Remote Control System Research Based on GSM Module
STBC Study on Reservoir Dispatching and Hydrology Satellite Monitor System
Board Microcomputer Control System to Export Diesel Locomotive
Research of Automatic Welding Machine Controlling System Based Single-Chip
Machine-Printed Invoice Number Based on Fuzzy Recognition
Expert System for Fault Intelligence Diagnosis of Gasoline Engine
Implemention of FIR Filter Based on DSP
Research on Program Calling and File Sharing between Windows and Linux
Study of Control and Detection on Firing Circuit
Detector on Dam's Piezometric Tube Level
Research of Stand-Alone Photovoltaic Power Generator Monitoring System
Fault Diagnosis of Power Transformers Based on Membrane Computing Optimizing Neural Network
Remote Measurement & Control of Ship Mooring System
Algorithm Based on Layering Search to Routes Planning of Vehicle Navigation System
Research on Remote Meter Reading System Based on PLC Technology
Simulation Environment for Dangerous Chemicals Transportation
Fuzzy Self-Tuning PID Controller in SEHS
Research of Universities Teaching Materials and Resources Based on Semantic Grid Portal Construction
Research of Optimal Control Model with Multiple Inputs and Multiple Outputs Based on Logic Algebra
Eyelid Noise Detection Based on Gray-Scale Morphology and Judgement of Noise Occlusion
Application of Multivariable Non-Linear Decoupling Control Based on Neural Network
MHD: A New Method towards Privacy Protecting Datasets Published
Simulation of Large Amount of Data Liquid-Solid Coupling Based on the SPH
A Study on Component Composition Technology Based on XCM
Based on OLAP Realize Real-Time Integrated Analysis of the Underground Metal Mines Cost Information
Chapter 6: Mechatronics and Applications
Precise Mechanics Control and Simulation of Automotive ABS
Simulation of Automatic and Intelligent Mechanical Arm
Explosion-Proof Soft Starter Control System Based on DSP
Analysis of Attribute Reduction of Rough Set and CNC Machine Fault Diagnosis Based on Particle Swarm
Numerical Control Machines Performance Test Platform
Simulation Method for ARM Fragment Killing Ground Targets
Nonlinear Adaptive Observer-Based Fault Diagnosis for Satellite Actuator
An Acoustic Source Localization Method Based on Equal Distances Multi-Sensors Array
Research on Wideband Guiding System Receiving Technology
Ultrasonic Rangefinder Based on P89LPC932
Microcontroller System Design for Robotic Vehicles
Data Fusion of Ultrasonic Wave Sensor Static State Based on BP Neural Network
A Discrete Realization of Higher Resolution Phase Detection
Analysis of Characteristics and Safety of Numerically Controlled Lathe
Three-Degree-of-Freedom Step Motor Control Strategy Based on DSP
Study of a Novel Demodulation Method for FBG Sensor
M Optimized Multi Virtual Gravity
Research on Video Processing System Based on Artificial Fish Swarm Algorithm
Study of Remote Sensing and Remote Sensing Robot Technology
Study on Multidisciplinary Design Optimization of 3-RRS Parallel Robot
Modeling and Simulation Research of NC Machine Servo System Based on Fuzzy PID Control
Coupled-Field Finite Element Analysis of MEMS Compound Electrostatic Actuator by Using the ANSYS Software
Modeling and Simulation of a Switchable Chaotic System with Fractional Order
Reform of CNC Machine Tool and Programming Based on CDIO Model
Research of Virtual Cutting Based on Hap Tic Feedback
by "Nielsen BookData"
