Frontiers of materials, chemical and metallurgical technologies : selected, peer reviewed papers from the 2012 International Conference on Chemical Engineering, Metallurgical Engineering and Metallic Materials (CMMM 2012), October 12-13, 2012, KunMing, China

著者

• International Conference on Chemical Engineering, Metallurgical Engineering and Metallic Materials
• Kao, Jimmy (C.M.)
• Sung, Wen-Pei
• Chen, Ran

書誌事項

Frontiers of materials, chemical and metallurgical technologies : selected, peer reviewed papers from the 2012 International Conference on Chemical Engineering, Metallurgical Engineering and Metallic Materials (CMMM 2012), October 12-13, 2012, KunMing, China

edited by Jimmy (C.M.) Kao, Wen-Pei Sung and Ran Chen

（Advanced materials research, v. 581-582）

Trans Tech Publications, c2012

• : [set]
• Part 1
• Part 2

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). This work brings together some 280 peer-reviewed papers on Chemical Engineering, Metallurgical Engineering and Materials Engineering. It will certainly serve to promote the development of Chemical, Materials and Metallurgical Engineering, the strengthening of international academic cooperation and communication, and the exchange of research ideas offering, as it does, a broad overview of the latest advances in the field of Materials and Chemical Engineering.

目次

Preface and Committees Chapter 1: Chemical Engineering and Technologies The Study on Application of N-P Intumescent Flame Retardant Agent in Waterborne Polyurethane Antihypertensive Evaluation of Lignin Related High-Added-Value 4-Aryl-Hexahydroquinolines Application of the Enzymolysis and Membrane Technology in Glucan Extraction and Purification from Grifola frondosa Chemical Composition of the Essential Oil of Fresh Wild Syringa pubescens Flowers from China Chemical Reaction and Fluid Flow in a Carbon Monoxide Boiler(II) Chemical Reaction Analysis A Continuous Process for the Preparation of Pyridine from Tetrahydrofurfuryl Alcohol with (MoO3-NiO) / Al2O3 as Catalyst Adsorption of Methyl Orange from Solution by IOCZ in Batch Mode: Equilibrium Study Advances Research on Identification Method of Fluidized Bed Flow Pattern Analytical Heterogeneous Extended Langmuir Model: Effect of Unilan Parameters Analytical Method of Gliotoxin Content by HPLC Applicability of Emulsion Viscosity Models to Crude Oil Emulsion Concentration of DHA and EPA from Marine Fish Oil by Urea Complexation Decolorization of Direct Yellow R Dye from Aqueous Solution by Aluminum Anode Electrochemical Degradation of Polyacrylamide in Oil Wastewater by Electrocatalytic Oxidation Determination of Paeoniflorin and Paeonol in Houyinan Tablet by UPLC Dissolution Behaviour and the Solution Property of Cellulose in NaOH/Urea/Thiourea Aqueous Solvent Effect of Carrier Surface Modification on the Resultant Antibody to Folic Acid Evaluation of the Thermal Stabilization Effect of the Bis (Mercaptoethanol Oleate) Dimethyl Tin on Polyvinyl Chloride Evaluation of Thixotropic Models of Waxy Crude Experimentation and Mathematical Model Reseach on Air Gap Membrane Distillation Extraction and the Chemical Composition Analysis of the Essential Oil Flowers of Ficus hookerianaCorner Green Synthesis of Poly( -Dioxanone)-Modified Cellulose by Lipase-Catalyzed Ring-Opening Polymerization in Ionic Liquid Influence of Sulfide on Oxygen Reduction Reaction in 3.5% Sodium Chloride Solution Injectable Surfactant Included-Virgin Coconut Oil with and without Ibuprofen Kinetics on the Isothermal Decomposition of Oil Shale Mercury's Leaching Contamination in Soil Environment Novel Biobased Materials from Tung Oil-Based Monomer and Tung Oil-Modified Unsaturated Polyester Perspectives on Physicochemical Properties and Application of Biodiesel Blends Preparation and Application of the Amino Silicone Oil / Acrylic Emulsion Preparation of Biodiesel from Crude Rubber Seed Oil by Alkaline Transesterification Protein Hydrolysate from Brewer's Spent Grain and its Inhibitory Ability of -Glucosidase Research on the Utilization and Industry Development Strategies of Fluorite Resources in China's Fluorine Chemical Industry Role of Colloidal Silicon Dioxide in Eudragit In-Situ Forming Gel Simultaneous Determination of Hydrochlorothiazide and Propranolol Hydrochloride in Powder Mixture and Matrix Tablet Using First Derivative Ultraviolet Spectrophotoscopy Study on "Vacuum Migration" of the Desorption of Ethanol-Loaded Activated Carbon by Microwave Irradiation Study on Processing of Plantation Fir Scrap Liquefaction by Ionic Liquids Study on Synthesis of Cationic Water in Water Polyacrylamide Emulsion Strength Agent Study on the Gelation Properties of the Glucan from Sclerotium rolfsii Study on Vanadium Solution Dissolved Sediment in Wastewater from Vanadium Precipitation Supramolecular Assembly of Functional Cholesteryl Substituted Luminol Derivative in Organized Molecular Films Synthesis and Adsorption Properties for Ag(I) of Pyridinedicanbnyl Thiourea Resin Synthesis and Characterization of Hyaluronic Acid for Biomedical Application Synthesis and Crystal Structure of 2-Hydroxyl-4-Methyl-Thioxanthone Synthesis and Crystal Structure of a New Cu2+ Complex Synthesis of Biodiesel by Different Carriers Supported KOH Catalyst Synthesis of n-Amyl Chloroacetate Catalyzed by Activated Carbon Supported Phosphotungstic Acid Synthesis Study of the Antioxidant of Tetrakis(2,4-di-tert-butyl phenyl)-4,4'-Biphenylenediphosphonite Esters Synthesis, Characterization and Antitumor Activities of Cis-Ammine Gallic Acid(cyclohexylamine)Platinum(II) Study on Decolorization for Dye Wastewater by Adsorption - Microwave Degradation Activated Carbon from Bean Dregs Study of Microwave Synthesis of 2 - Hydroxy Phosphono Acetic Acid Process Preparation and Application Study on the Coalmine Wastewater Flocculant - PAM/OMMT Kinetic Study of the Esterification Reaction of Ethylene Glycol with Phenyl Phosphonic Acid and Benzene Phosphinic Acid The Study on Moisture Adsorption of Oxidized Activated Carbon Phenolic Foam from Oxidatively Degradated Lignosulphonate Study on Influence Factors in Flocculation Conditions of Bioflocculant Preparation of Polycarboxylate Terpolymer High Performance Water Reducer of MA-AA-F108 Reusable and Efficient PS-Supported Acidic Ionic Liquid Catalyst for Mononitration of Toluene Preparation and Properties of Cross-Linked Enzyme Aggregates of Cellulase Toxic Gas Continuity Diffusion Algorithm of Multi-Tanks Based on Meshing Technique Study on Application as Paper Strengthening Agent of Homemade CPAM Emulsion with other Cationic Strengthening Agent Rapid Analysis of the Main Components of Glycyrrhizae Uralensis Fisch by UPLC/Q-TOF-MS Adsorption Kinetics and Thermodynamics of Methyl Orange on Ethylenediamine-Modified Chitosan Magnetic Nano-Adsorbent Adsorption Properties of Formaldehyde by Organic Modified Zeolite Characterization of Lanthanum Nitrate Modified CaMgZn Mixed Oxide Catalysts for Synthesis of Biodiesel Study on the Chemical Modification of Cellulose in Ionic Liquid with Maleic Anhydride Synthesis and Catalytic Performance of Al-Pillared Clays Supported Fe3O4 Nanoparticles Synthesis of 1,4-Bis(3-amino-5-trifluoromethylphenoxy)Benzene and Properties of the Polyimide Film Therefrom The Effects of the Reaction Conditions on the Grafting Degree of SiO2-g-PMAA Particle Determination of Organochlorine and Pyrethroid Pesticides Using Membrane-Protected Multiwalled Carbon Nanotubes Solid Phase Membrane Tip Extraction Electroreduction Behavior of Acrylonitrile in BmimBF4 Pd-Only Catalyst Modified by BaO with Co- Precipitation and Impregnation Methods towards the Methanol Fuel Emission Control Studies on Sonogashira Coupling Reaction of Dibenzoporphyrin Synthesis and Characterization of a Novel Alkaline Earth Metal Complex Synthesis of Functional Ionic Liquids by Thermal Heating and Ultrasonic-Assisted Methods Synthesis of Starch Graft Copolymer Dispersant and its Application Performance in Coal-Water Slurry Synthesis and Evaluation of Sulfonated Humic Acid-Acrylic Acid Graft Copolymer Applied as Dispersant in Coal-Water Slurry Chapter 2: Materials and Alloys Analysis on Crack Propagation Mechanism of Nano-Single Crystal Copper about Temperature Influence "HaiYangShiYou 115" Anchor Chain Broken Wire Cable Material Test and Breakage Analysis DFT Study on Structures, Stabilities and Electronic Properties of Bromo Silsesquioxanes Si2nO3nBr2n (n=1-5) Effect of Citric Acid on Electrochemical Properties of Spinel LiMn2O4 Prepared by Solid-State Combustion Synthesis Effect of Contact Characteristics on the Friction and Wear Behaviors of Stainless Steel/Copper-Impregnated Metalized Carbon under Electric Current Effects of Annealing on Mechanical Properties in Ultrafine-Grained Cu-Al Alloy Effects of Nano-SiO2 in Electrolytes on Surface Properties of Micro-Arc Oxidation Ceramic Coatings Formed on New Casting Aluminum Alloy Effects of SiO2 and Al2O3 Contents of Converter Slag on Metallurgical Properties Electrical Discharge Machining of Nickel-Based Super Alloy Electrochemical and Gaseous Hydrogen Storage Capacities of As-Spun Nanocrystalline and Amorphous Mg2Ni0.6M0.4 (M=Cu, Co) Alloys Experimental Study on Rutile TiO2 Surface Coated with Al2O3 and ZrO2 Fabrication of TiO2 Nanotubes by Anodic Oxidation for the Dye Sensitized Solar Cell Application Hydrothermal Synthesis of Mesoporous Al2O3: Influences of pH Values and Aluminum Precursors Impact of H3BO3 on Foaming Action of CaCO3 in Borosilicate Foam Glasses Impact of Melt Spinning on Electrochemical Hydrogen Storage Characteristics of Mg20Ni9M1 (M=Cu, Co) Alloys Improving Corrosion Resistance of the Hot-Dip Aluminum Coating on 22MnB5 Steel Surface Influence of Heating Temperature on Microstructure Characteristics of Directionally Solidified Ni-45Ti-5Al Alloy Influences of Physicochemical Properties of ZnO on the Adsorptive Desulfurization Performance of Ni/ZnO Adsorbent Microemulsion Method Preparation Zn(1-X)S:Cux(0.001 Microstructure and Corrosion Resistance of Black Microarc Oxidation Ceramic Coatings on Magnesium Alloy Microstructure Evolution of Nd in Spray Deposited Magnesium Alloy Microstructure of Casting and Solid Solution of Cu-7.5Ni-5.0Sn Alloy Microstructures and Damping Properties in Ni-Al-Based Alloys Molecular Dynamics Simulation of Thermoelastic Coupling Characteristic for Low-Dimensional Nano-Rod under Thermal Shock Multiple Adiabatic Shear Bands in Ti-6Al-4V Targets under Ballistic Impact Photoisomerization of some Functional Azobenzene-Containing Metal Complexes with Different Substituted Groups Preparation and Characterization of Sro-Na2O-Fe2O3-P2O5-SiO2 Ferrimagnetic Glass-Ceramics for Hyperthermia Application Preparation and Microanalysis Study of Nano-Hap/Cs-Chs Composites Materials Preparation and Properties of Cu-Cr Alloy Coating on Cu Matrix by Laser Surface Alloying Preparation and Property Study of CuCr Alloy Based on SHS Preparation of TiO2 Nanotubes by Ionic Liquid Assisted Anodic Oxidation Method Research of Cu-15Ni-10Mn Alloy As-Cast Research on Effects of Annealing and Al Gettering on Electrical Properties of Upgraded Metallurgical Grade Multicrystalline Silicon Research on Tribological Properties of Nano-SiO2/Cu Composites Study of Hydrophilic Films on Copper Tube Study on Composite Coating of -PbO2-Co3O4-CeO2 on Stainless Steel Study on Conductivity of Plain Woven Fabric of Embedded Silver-Plated Fibers of Different Twists Study on Microstructure of Several Nb-Ti-Cr-Al as-Cast Alloys Synthesis and Its Exchange Capacity for Li+ of Mg0.75Ti1.125O3 Synthesis and Properties of Highly Oriented Lead Barium Titanate Thin Film on MgO(100) by a Nonaqueous Sol-Gel Process The Effect of Sintering Temperature on the Mechanism of Metal Composite and Self Toughing and Toughening Si3N4 Ceramics Coupling The Preparation and Characterization of LiFe0.98Mn0.02PO4/C by Spray-Drying and Low Temperature Reduction Route The Preparation Research for IT-SOFC Anode Material LSCM The Study of Edge Crack on Hot Strip Steel for CSP Synthesis and Characterization of Quaternary Ti-Si-C-N Film Deposited by Middle Frequency Magnetron Sputtering Morphology-Controlled Fabrication of CuO Architectures Microstructure and Mechanical Properties of Al2O3/NiAl In Situ Composites by Hot-Press-Aided Reaction Synthesis Effect of the Short Fiber on the NR Composite and the NR-SBR Composite Effect of Elements on Characteristics and Structure of Cu-22.7Zn Brass As-Cast Nano-MgO Templated Mesoporous Carbon as Anode Material for Li-Ion Batteries Study on Carbon-coating Li3V2(PO4)3 Cathode Materials Prepared with Different Carbon Sources The Preparation and Characterization of LiFe0.98Ni0.01Nb0.01PO4/C by Carbon Reduction Route Photochemical Events during the Photosensitization of Hypocrellin A on ZnS Quantum Dots Preparation and Properties of ZnO by Ionic Liquid Assisted Sol-Gel Method Welding of Fe-Al Intermetallic Compound and Steel by SPS Technology Study on Microstructure and Oxidation-Resistance of Superalloy Coating with Ni-Base Substituting for Co-Base Fabrication Lead Dioxide Coating by Pulse Current Method Effects of Sputtering Conditions on Microstructure and Ferroelectric Properties of RF-Sputtered Bi3.25La0.75Ti3O12 Thin Films Using Ring Stiffness to Calculate the Elastic Modulus of Steel-Plastic Composite Pre-Insulated Pipe The Effect of Annealing on Nanostructured Copper Alloys Preparation and Characterization of LiMn2-xMgxO4 by Low-Temperature Flameless Solution Combustion Synthesis Thermodynamic Analysis of the Reduction of WO3 by Al Powder Comparation with Performance of Bamboo Fiber Reinforced Starch-Based Foams with Different Foamer Effect of Electron Beam Irradiation on the Polypropylene/Syndiotactic 1,2-Polybutadiene Blends: Radiation Stabilization of Polypropylene Homogenization Analysis Model for Granule System by Introducing Shape Parameters Hypernormal Form at Cubic of a Rectangular Symmetric Cross-Ply Laminated Composite Plate Influences of Model's Shape on Molding Time in Glass Molding Press Interfacial Assembly and Coordination of a Series of Schiff Base Compounds with Aromatic Spacer Multi-Trait Associated Selection of the Larix Construction Timber Superior Families Preparation and Characterization of CaSiO3 /Natural Rubber Composite Reinforcement of NR with ENR Modified RHA Research on LB Films of Two Schiff Base Compounds with Alkyl Chains and Different Azobenzene Substituted Groups Research on the Preparation of Slag Wool Fiberboard with Sodium Silicate Stress Intensity Factor of Thermal Fatigue Crack in High Temperature Study of an Inorganic Ion Exchanger Mg0.5Ti1.25O3 Study on Cu2+ Absorption Characteristics of Bentonite - Acrylic Acid Resin Study on Gas-Liquid Inclusions in Quartz Sand under Microwave Field Study on Kinetics of Reaction between ZrNi5 and Water Vapor Study on Performances of Cyanethyl Chitosan Fiber Prepared from [Asp]Cl Ionic Liquid Study on the Comfort Properties of Embedded Weaving for Photocatalyst Fiber Filament Fabric Study on the Physical and Biological Properties of Corn Fiber Gum from Corn Kernel Pericarp The Effect of Polyester Structures on the Damping Property of Polyurethane Elastomers The Effects of Hanging Microbe Coagulation Natural Rubber on Molecular Structures and Mechanical Properties Thermal Degradation Behavior of Polyaniline in Polyaniline/Tunsten Carbide Composite The Flocculating Properties of Cationic-Starch-Graft-Polyacrylamide and its Nano Magnetic Modified Product Thermodynamics of Potassium Dihydrogen Phosphate Growth: Baseline for Understanding Single-Crystal Formation Removal of Iron in Hot Acid Leach Liquor by Hematite Process The Growth Mechanism of LSGM Thin Film Electrolyte by RF Magnetron Sputtering The Study on the Mechanical Properties of Closed-Cell Foam Rubber Based on Microstructure Model Studies on the Desalination of NaCl Solution with Activated Carbon Coating Electrodes by Electrosorption and Kinetic Analysis Nonlinear Intelligent Constitutive Relation Of Piezoelectric Ceramic Study on Corrosion Inhibition of Compound Corrosion Inhibitor of Molybdate in Seawater Simulation on Ballistic Performance of Ceramic/Metal Composite Armor Validity of Several NDT Methods on Low Velocity Impact Damage Evaluation of 2-Dimensional Plain Woven C/SiC Composites Characteristic Improvement of Carbon Coating by Furan Resin on Natural Graphite as Anode for Lithium Ion Batteries Effect of Heat Treatment on Microstructure and Corrosion Resistance of Ni-Cr-Mo-Fe Alloys Effect of Hydrogen Content on Structure and Properties of Sintering Body Utilizing TC21 Hydrogenated Powder Optimization of Factors Influencing the Aspect Ratio of Mullite Whiskers Based on Single Factor Analysis and Response Surface Methodology Research on the Electrical and Thermal Conductivity of Magnetorheological Fluid Study of Chelating Agents in Silicon Wafer Polishing Slurry The Effect of Suspension Casting on the Properties of Fly-Ash Particle Reinforced Al Matrix Composites Calculation of Thermodynamic Properties for B2-YCu Intermetallics with Molecular Dynamics Numerical Simulation on the Effects of Ceramic Particle Reinforcement Distribution on the Penetration of Functionally Graded Material Armor Effect of Filler Alloy on Microstructure, Mechanical and Corrosion Behaviour of Dissimilar Weldment between Aisi 201 Stainless Steel and Low Carbon Steel Sheets Produced by a Gas Tungsten Arc Welding Chapter 3: Metallurgical Technologies Optimization on Influencing Factors of Fracture Toughness of Corundum-Mullite Toughened by In Situ Synthesized Mullite Whiskers by Response Surface Methodology Analysis of the Color Phosphating Process Influence Factors Analysis on Crack Propagation Mechanism of Single Crystal Copper by FEAt Method Comparative Study on Removal of Fe, Al and Ca From MG-Si by Acid Leaching Crystallization Behavior during Preparation of Glass-Ceramics from BF Slag of Baotou Iron and Steel Company Effect of Hot-Rolling Parameters on Microstructure and Mechanical Properties of 72LXA Steel Wire Rod Effect of Sodium Carbonate Concentration on Leaching Property of Sintered Clinkers with Low A/S Ratio Experimental Study of Floatation on Non-Independent Copper Oxide Ore from Jilin Province in China Experimental Study on Spraying Nozzle Arrangement of Slab Caster Inclusion Control of Oil Drilling Steel SAE4137 Influence of the Mechanical Activation on the Reactivity of Germanium-Containing Zinc Neutral Leaching Residue Microwave Digestion-ICP-MS Determination of Vanadium Oxide for 22 Impurity Elements New Groove Design and Three-Dimensional Numerical Simulation of Ultra-Fine Grain of Bar Rolling Numerical Simulation on Temperature Drop of Molten steel in 210 t Ladle Research of Lime-Mediated Sewage Sludge Use as Metallurgy Sintering Ingredients in the Sinter Industry Research on Extending the Lifetime of Combined Blowing Vanadium Recovering Converter Research on Technology of Smelting Low-Sulphur Steel Situation and Technology Progress of Lead Smelting in China Study on Deformation Behavior of Rolled Metal at Ultra High Rolling Speed in Wire Rod Mills Study on Low Temperature Co-Carbonization of Coal and Algae Utilization of Steelmaking Dry-Dedusting Dust Effect of Spheroidizing Annealing Time on Microstructure and Hardness of GCr15 Bearing Steel Optimization of Secondary Cooling on Rectangular Bloom Based on Subproblem Approximation Method Research on Reducing Tapping Temperature of BOF Removal Phosphorous from High Phosphorous Converter Steel Making Slag by Hydrometallurgical Process Research on Application of Vanadium Extraction Tailings for BOF Steelmaking Experimental Research of Tin Ore from Kazakhstan Effect of Heat Treatment on Microstructure and Properties of Cr15 Super Martensitic Stainless Steel Study on Inclusions of Low Carbon Steel Slabs Produced in Different Casting Stages Decontamination of Drilling Fluid Waste from Coalbed Methane Well Flotation of a Refractory Copper Oxide Ore Using Ammonium Bicarbonate as Activator Flotation of Copper Oxide Minerals Using Ethylene Phosphate as Activators Study on Calcium Ions Affecting Mechanism to Collecting Quartz in the System of Dodecyl Sulphonate The Application of METSIM in Hydrometallurgy Process: A Case Study Research on the Mechanism of Producing Calcium Vanadate An Electrochemical Corrosion Study of SAE1045 Steel in Polyacrylamide Gel and Sodium Chloride Surroundings Corrosion-Resistance of Ni3Al Intermetallic Compounds Containing Cr Synthesized via Spark Plasma Sintering Process Effect of Cold-Rolling Reduction on Recrystallized Annealing Microstructure and Texture of Titanium Stabilized Interstitial Free Steel Effect of FeO on Sintering and Leaching of Calcium Aluminates in the CaO-Al2O3-SiO2 System Effect of Strain Rate on Mechanical Properties of Fe-30Mn-3Si-4Al TWIP Steel Effect of Tempering Process on Structure and Properties of Super Martensitic Stainless Steel Effects of Particle Size of Coke on the Electrical Property and Hardness of Copper/Coke/Phenolic Resin Composites Extraction and 3-Dimension Morphology Characterization of Metastable Secondary Phase in Steel Finite Element Simulation of Nickel-Plated Steel Sheet in Stamping Process Flowing Liquid Metal Corrosion of Structural Steels in the Pb-Bi Eutectic Fluoride Evaporation during Thermal Treatment of Waste Slag from Mg Production Using Pidgeon Process Germanium Co-Precipitation with Ferric Hydroxide: A Lab-Scale Study High Temperature Deformation Behavior and Corrosion Resistance of 2205 Duplex Stainless Steel under Strain Rate of 0.5s-1 Influence of pH on the Electrochemical Bahavior of 00Cr15Ni7Mo2Cu2 Supermartensitic Stainless Steel in 3.5% NaCl Solutions Non-Metallic Inclusions Control for High Strength Anti-HIC X65 Tube Steel Research on Hydrometallurgical Purification of Microimpurity in SiGe Alloy Tailings Research on Technology of Reducing Iron and Steel Consumption in Whole Process of Steelmaking Study on Technology of KR Desulfurization for Hot Metal with Vanadium and Titanium Studying on Leaching Low Grade Copper Oxide Ore in the System of NH4CO3-H2O The Study of Color Film Phosphating Process in Steel before Coating Ratio of Magnesium in Prepared High Titanium Ferroalloy with Titanium Concentrate and Titanium Slag by Thermite Reduction Research on Separation of Copper-Lead Mixed Concentrate An Electrochemical Corrosion Study of SAE1045 Steel in SiO2 Gel with 3 wt% Sodium Chloride Biooxidation Pretreatment Cyanide Leaching of a Flotation Gold Concentrate Research of Refractory Oxidized Lead-Zinc Ore in Lanping The Effects of Nd on Lead Anode for Zinc Electrowinning Study on Preparation of High-Grade Titanium-Rich Material from Modified Titanium Material by Microwave Selective Leaching The Investigation of Coke Breeze Demineralization on Temperature Chapter 4: Related Themes A Study on Advanced Treatment for Coking Wastewater with Biological Activated Carbon Based on Efficient Degrading Flora A Study on the Relationship between the Abnormal Chemical Components of Underground Water and Endemic Fluorosis in Shuangliao Area, Jilin Province, China Efficient Expression of Mussel Adhesive Protein in Pichia pastoris GS115 Promoted by Ectoine Influence of Disintegrant on Properties of Fast Disintegrating Tablet Containing Xylitol The Changes of Fibrinolytic Activity of Nattokinase in Artificial Gastrointestinal Environment and Human Digestive Juice Effect of Zn Stress on Pteris vittata Spectrophotometric Determination of Kryptofix 2.2.2 Using TCNQ Cold Test of Circulating Fludized Bed Decomposition Phosphogypsum Analysis of Volatile Compounds in Flowers of Fraxinax sieboldiana by Headspace Solid-Phase Microextraction Coupled to Gas Chromatography-Mass Spectrometry Distributed Characteristics of Mining Rights of Key Minerals of China Exploration of Exhaust Gas of Natural Gas Catalytic Combustion in the Aseptic Box Material Performance Data Acquisition and Management System for Welded Pipe Used in the 2nd West-East Gas Pipeline Optimization of Steelmaking Process for 200t Converter Purification of Soybean Isoflavones from Soy Sauce Residue by Ultrafiltration Screening, Identification of a Marine Fungal Strain Producing Chitosanase Study on Operating Conditions of Membrane-Aerated Bioreactor Study on the Decontamination by Introducing Microorganism Action in the Process of Using Coal-Gangue Packed for Mine Study on Removing Dissolvable Mn2+ from Manganese Residue by Oxidation at High Temperature Process Optimization of Hemicelluloses Lye Extraction from Sugarcane Bagasse

「Nielsen BookData」 より

• NII書誌ID(NCID): BB11503966
• ISBN:
  • 9783037855126
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 2 v.
• 大きさ: 25 cm
• 親書誌ID:
  • BA24926058