Advances in materials and processing : challenges and opportunities : selected, peer reviewed papers from the International Conference on Advanced Materials Processing - Challenges and Opportunities (AMPCO 2012), November 2-4, 2012, Roorkee, India
Author(s)
Bibliographic Information
Advances in materials and processing : challenges and opportunities : selected, peer reviewed papers from the International Conference on Advanced Materials Processing - Challenges and Opportunities (AMPCO 2012), November 2-4, 2012, Roorkee, India
（Advanced materials research, v. 585）
Trans Tech Publications, c2012
- : pbk
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The volume covers a wide range of materials research and maintains a good balance of theoretical and applied work. In keeping with the present trend the number of papers in Nanomaterials in the highest with a good number in Electronic Materials and Energy Storage Materials. Reflecting the varied interests of the Department there are quality papers on Metallurgical themes such as Metal Casting, Mechanical Processing and Materials Joining.
Table of Contents
Preface and Reviewers
Chapter 1: Materials Modelling
Thermodynamic Rationalization of the Microstructures of CrFeNi & CuCrFeNi Alloys
Nano-Size and Miscibility Gap
A Numerical Study on Heat Conductivity Characterization of Aluminium Filled Polypropylene Composites
Analytical Prediction of Thermal Behaviour during Cooling of a Hot Steel Strip
Ultrasonic Lamb Wave Based Crack Growth Prediction for Estimation of Strain Energy Release Rate
Optimum Stacking Sequence Design of Composite Sandwich Panel Using Genetic Algorithms
Deformation and Energy Absorption of Aluminum Foam Filled Square Tubes
Finite Substrate Effects on Critical Thickness in Epitaxial Systems
Natural Frequencies and Mode Shapes of Laminated Composite Skew Hypar Shells with Complicated Boundary Conditions Using Finite Element Method
Chapter 2: Materials Characterization
Microstructural Characterisation of Devitrite, Na2Ca3Si6O16
Microstructural Studies of Zr-2.5Nb and Zircaloy-2 Pressure Tubes Irradiated in Indian Pressurized Heavy Water Reactors
Effect of Mg Substitution on Microwave Absorption of BaFe12O19
Characterization of Pearlite Morphology and Associated Micro-Cracks in EN9 Grade Carbon Steel by Atomic Force Microscopy
Defect Depth Quantification Using Pulsed Thermography
FTIR and TGA Analysis in Relation with the % Crystallinity of the SiO2 Obtained by Burning Rice Husk at Various Temperatures
Study on Luders Deformation in Welded Mild Steel Using Infrared Thermography and Digital Image Correlation
Hollow Silica Granules by Microwave Processing
Chapter 3: Nanomaterials
Synthesis and Analysis of High Surface Area Vanadium Carbide Nanoparticles
Nanocrystalline Co82Ni18 Alloy: Synthesis and Magnetic Properties
Optical Study on Gadolinium Oxide Nanoparticles Synthesized by Hydrothermal Method
Effect of Mineralizer (KNO3) on the Structural and Optical Properties of h-MoO3 Nanocrystals
Synthesis of Gold Nanoparticles in Presence of Poly(vinyl pyrrolidone) from Gold Hydroxide Precursor Salt
Synthesis and Characterization of Ag - Soda Glass Nanocomposites
Fabrication and Characterization of ZnO Nanowires by Thermal Oxidation Method
Morphological and Luminescence Study on Eu3+ Doped ZnO Nanoparticle Prepared by Hydrothermal Method
Refractive Index Tailoring of Poly(methylmethacrylate) Thin Films by Embedding Silver Nanoparticles
A Study on Luminescence Enhancement in Ion Irradiated TiO2/Poly(methyl methacrylate) Nanocomposites
Mythology Merges with Technology for Majestic Production of Silver Nanoparticles: Rudraksha Enabled
Crystallization Behavior and Curie Temperature Properties of Al Doped Nd-Fe-B Based Nanocomposite Permanent Magnet
Synthesis, Characterization and Antibacterial Activity of ZnO Nanoparticles of Different Morphology
Influence of Melting of Transition Metal Oxides on the Morphology of Carbon Nanostructures
Synthesis of NiO Based Bimetallic Mixed Metal Oxide Nanoparticles by Sol-Gel Method
Synthesis of Transition Metal Oxide Based MgO Nanocomposites by a Simple Precursor Approach
Effect of Rare Earth Doped Elements and Characterization of LaF3:Ln3+ (Ln3+= Ce3+, Pr3+, Nd3+) Nanocrystals
Structural and Infrared Spectroscopy Study of Chemically Synthesized Sn1-xCoxO2 (0.00 x 0.05) Nanoparticles
Chapter 4: Electronic Materials
Characterization of Plasticized PMMA-LiClO4 Solid Polymer Electrolytes
Dielectric Behavior and Impedance Spectroscopy of Ba1-xBixTi1-xFexO3 System
Investigation on Glasses in Strontium Zinc Borosilicate System as Sealants for Solid Oxide Fuel Cell
Effect of Rare Earth Gadolinium Substitution on the Structural, Microstructure and Dielectric Properties of Lead Free BNT Ceramics
AC Conductivity and Dielectric Relaxation Studies of La0.95Sr0.05GaO2.975 Gallate
Rietveld Refinement and DC Conductivity of Na0.5K0.5NbO3 Ceramics
Plasmonics Properties of ZnO/Ag/ZnO Multilayer Thin Films
Structural and Dielectric Properties of Na0.5Bi0.5TiO3 Ferroelectric Ceramics
Spectroscopic and Electrical Studies of Ferrous Sulphate Doped Polyaniline
Synthesis, Characterization and Electrical Conductivity Measurements of Polypyrrole/ Montmorillonite Nanocomposites
Chapter 5: Energy and Smart Materials
CNT-ZnO Nanocomposite Thin Films: O2 and NO2 Sensing
Synthesis and Characterization of LiFePO4-C/ PANI Composite for Cathode Material of Lithium Ion Battery
Conductivity Measurement of Calcia Stabilized Zirconia Prepared by Mechanical Route
Preparation and Characterization Cu-Cr Contact Material and Study their Hardness and Conductivity
Application of Graphene Oxide and TiO2 in the Fabrication of Dye Sensitized Solar Cells Module by Electrode Modification
Structural, Optical and Ferroelectric Properties of BiCoO3:BiFeO3 Composite Films
Modified Becke-Johnson Approach for Governing Half Metallic Ferromagnetism in Cr-Doped GaP DMS Compound
Mn-Disorder Effect on Magnetism and Half Metallicity of NiCoMnGa Quaternary Heusler Alloy
Ground State Electronic and Magnetic Properties of LaCrO3 System
Absorbance and Fluorescence Spectral Analysis of Sm3+ Ions Doped Bismuth Boro-Silicate Glasses
Synthesis of TiO2 Film for Dye-Sensitized Solar Cells
Fe-P Soft Magnetic Properties of Iron for A.C. Applications
Chapter 6: Composite Materials
Physical and Mechanical Properties of Epoxy-Nanoparticulate Composite Adhesive
Synthesis and Characterization of Particulate SiCp Reinforced Al-Si-Mg Alloy Composite with Varying Si Content
Development of Mo and Ta Foil Reinforced (MoSi2 + 20 Vol% SiCp) Matrix Laminated Composites
Mechanical and Dielectric Properties of PTSL FRP Composites
Fabrication and Characterization of Aluminium Matrix Composites by High Velocity Oxy-Fuel Thermal Spraying
Properties and Characteristics of Sisal Fibre Reinforced Composite
The Effect of Aging on Energy Absorption Capability of Closed Cell Aluminum Foam
On the Actuation Authority of Adaptive Sandwich Beam with Composite Actuators: Coupled Finite Element Analysis
Impact Damage Detection in GFRP Laminates through Ultrasonic Imaging
Application of Ball Indentation Technique for Mechanical Properties Estimation of Bi-Metallic Weld
Chapter 7: Metal Casting
Influence of Casting Process Parameters on Surface Roughness in Hot-Chamber Die Casting of AZ91D
Mechanical Properties and Tensile Fracture Mechanism of Rheocast A356 Al Alloy Using Cooling Slope
Designing of a Novel Shroud for Improving the Quality of Steel in Tundish
Effect of Steel Making Slag on Castability of Medium Carbon Re-Sulfur Steel Grades
Chapter 8: Mechanical Processing
A Study of the Effect of Extrusion Parameters on the Properties of Extruded Zr-2.5Nb Pressure Tubes
Microstructural Studies of Al 5083 Alloy Deformed through Cryorolling
Influences of Temperature of Thermo Mechanical Working on Hardness of Titanium Alloy
RETRACTED: Grain Growth Kinetics of Accumulative Roll Bonded AZ61 Alloy
Mechanical Properties of Al6061 Processed by Equal Channel Angular Pressing
Effect of Distance between Passes in Friction Stir Processing of Magnesium Alloy
Effect of Cold Rolling on the Mechanical Properties of Spray Cast Al-6Si-20Pb Alloy
Analysis of Bi-Axial and Tri-Axial State of Stresses in Plastically Deformed Solid Cylindrical Specimens under Dry Lubrication
Strain Rate Sensitivity of Die Steel under Compressive Loads
Parametric Study while Microchanneling on Optical Glass Using Microcontroller Driven ECDM Process
Chapter 9: Materials Joining
Correlation of Mechanical and Microstructural Properties in SMAW Welded Cr-Mo Boiler Steels Subjected to Different Post Weld Heat Treatment Soaking Times
Mechanical and Microstructural Characterization of 8 mm Thick Samples of SS 316L by CO2 Laser Welding
Effect of Post Weld Heat Treatment on Mechanical Properties and Microstructure of Nickel Based Super Alloy Welds
Optimization of Process Parameters for Friction Welding of Bimetallic Welds
Heat-Treatment Studies on Dissimilar Ti-Alloy EB Weld Joints
Parametric Dependence and Characterization of Laser Brazed Copper-Stainless Steel Joints
Modelling for SAW Square Butt Joints by Using ANFIS to Predict the Weldment Characteristics of Joint
Transmission Electron Microscopy of Longitudinal Double Submerged Arc Weld (LDSAW) of X-120M Steel Line Pipe
Joining of Mild Steel Plates Using Microwave Energy
Chapter 10: Surface Engineering
Developing and Characterizing Polyurethane-Nanoclay Coatings for Better Scratch & Mar Resistance
Morphological and Hardness Studies of Electroless Ni-P-ZrO2 Nanocomposite Coatings on Mild Steel
Hot Corrosion Studies of HVOF-Sprayed Cr3C2-NiCr Coating on 310S Stainless Steel in an Actual Environment of a Coal Fired Boiler
Corrosion Resistance of a New Cu-Alloy (Low Ni) vis-a-vis Cu-10Ni Alloy in Sulfide Polluted Synthetic Seawater
Effect of Deposition Parameters & Molybdenum Percentage on Nickel-Molybdenum Alloy Coatings
Cladding of Tungsten Carbide and Stellite Using High Power Diode Laser to Improve the Surface Properties of Stainless Steel
Preparation and Characterization of Thermal Spray Coating of Glass Microspheres on Metal Substrate
Microstructural Features and Oxidation Behaviour of NiCrAlY Coatings Obtained by HVOF Process
A Study on Ni-P and Ni-P-ZnO Composite Coatings Developed by Electroless Technique
Study of Magnetic Abrasive Finishing Using Mechanically Alloyed Magnetic Abrasives
Corrosion Performance of Mild Steel in Paper Mill Effluent
Effect of Plasma Treatment on Surface Properties of Polymeric Membrane
Microstructural Parameters in Electron Irradiated PVA Films by Wide Angle X-Ray Scattering Studies (WAXS)
Effects of Surface Disordering on Optical & Mechanical Properties of Ar+ Implanted Polycarbonate
High Temperature Degradation of Co Based Superalloy in Incinerator Environment
Chapter 11: Tribology and Wear
Prediction and Simulation of Erosion Wear Behavior of Glass-Epoxy Composites Filled with Blast Furnace Slag
A Comparative Study of Cavitation Erosive Behaviour of 23/8N Nitronic Steel and 13/4 Martensitic Stainless Steel
Tribological Performance of a Non Asbestos Organic Brake Pad Using Various Organic and Mineral Fibers
Correlation of Reinforced Ceramicparticle's Nature and Size with Microstructure and Wear Behavior of Al-Si Alloy Composite
Effect of Micro-Size Cenosphere Content on Friction and Dry Sliding Wear Behavior of Vinylester Composites - A Taguchi Method
Tribological Characteristics of Aluminium Tri-Reinforced Particles (Al-TRP) Composites Developed by Liquid Metallurgy Route
Improving the Tribological Properties of Mg Based AZ31 Alloy Using Friction Stir Processing
Hardness and Wear Behavior of CoO Doped Fe-Al2O3 Metal Matrix Composite (MMC) Synthesized via Powder Metallurgy (P/M) Technique
Evaluation and Development of Economically Viable Coatings for Erosion Protection of Hydroturbines
by "Nielsen BookData"
