Advances in materials and processing : challenges and opportunities : selected, peer reviewed papers from the International Conference on Advanced Materials Processing - Challenges and Opportunities (AMPCO 2012), November 2-4, 2012, Roorkee, India

著者

• International Conference on Advanced Materials Processing Challenges and Opportunities
• Daniel, B. S. S.
• Chaudhari, G. P.

書誌事項

Advances in materials and processing : challenges and opportunities : selected, peer reviewed papers from the International Conference on Advanced Materials Processing - Challenges and Opportunities (AMPCO 2012), November 2-4, 2012, Roorkee, India

edited by B. S. S. Daniel and G. P. Chaudhari

（Advanced materials research, v. 585）

Trans Tech Publications, c2012

• : pbk

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). The volume covers a wide range of materials research and maintains a good balance of theoretical and applied work. In keeping with the present trend the number of papers in Nanomaterials in the highest with a good number in Electronic Materials and Energy Storage Materials. Reflecting the varied interests of the Department there are quality papers on Metallurgical themes such as Metal Casting, Mechanical Processing and Materials Joining.

目次

Preface and Reviewers Chapter 1: Materials Modelling Thermodynamic Rationalization of the Microstructures of CrFeNi & CuCrFeNi Alloys Nano-Size and Miscibility Gap A Numerical Study on Heat Conductivity Characterization of Aluminium Filled Polypropylene Composites Analytical Prediction of Thermal Behaviour during Cooling of a Hot Steel Strip Ultrasonic Lamb Wave Based Crack Growth Prediction for Estimation of Strain Energy Release Rate Optimum Stacking Sequence Design of Composite Sandwich Panel Using Genetic Algorithms Deformation and Energy Absorption of Aluminum Foam Filled Square Tubes Finite Substrate Effects on Critical Thickness in Epitaxial Systems Natural Frequencies and Mode Shapes of Laminated Composite Skew Hypar Shells with Complicated Boundary Conditions Using Finite Element Method Chapter 2: Materials Characterization Microstructural Characterisation of Devitrite, Na2Ca3Si6O16 Microstructural Studies of Zr-2.5Nb and Zircaloy-2 Pressure Tubes Irradiated in Indian Pressurized Heavy Water Reactors Effect of Mg Substitution on Microwave Absorption of BaFe12O19 Characterization of Pearlite Morphology and Associated Micro-Cracks in EN9 Grade Carbon Steel by Atomic Force Microscopy Defect Depth Quantification Using Pulsed Thermography FTIR and TGA Analysis in Relation with the % Crystallinity of the SiO2 Obtained by Burning Rice Husk at Various Temperatures Study on Luders Deformation in Welded Mild Steel Using Infrared Thermography and Digital Image Correlation Hollow Silica Granules by Microwave Processing Chapter 3: Nanomaterials Synthesis and Analysis of High Surface Area Vanadium Carbide Nanoparticles Nanocrystalline Co82Ni18 Alloy: Synthesis and Magnetic Properties Optical Study on Gadolinium Oxide Nanoparticles Synthesized by Hydrothermal Method Effect of Mineralizer (KNO3) on the Structural and Optical Properties of h-MoO3 Nanocrystals Synthesis of Gold Nanoparticles in Presence of Poly(vinyl pyrrolidone) from Gold Hydroxide Precursor Salt Synthesis and Characterization of Ag - Soda Glass Nanocomposites Fabrication and Characterization of ZnO Nanowires by Thermal Oxidation Method Morphological and Luminescence Study on Eu3+ Doped ZnO Nanoparticle Prepared by Hydrothermal Method Refractive Index Tailoring of Poly(methylmethacrylate) Thin Films by Embedding Silver Nanoparticles A Study on Luminescence Enhancement in Ion Irradiated TiO2/Poly(methyl methacrylate) Nanocomposites Mythology Merges with Technology for Majestic Production of Silver Nanoparticles: Rudraksha Enabled Crystallization Behavior and Curie Temperature Properties of Al Doped Nd-Fe-B Based Nanocomposite Permanent Magnet Synthesis, Characterization and Antibacterial Activity of ZnO Nanoparticles of Different Morphology Influence of Melting of Transition Metal Oxides on the Morphology of Carbon Nanostructures Synthesis of NiO Based Bimetallic Mixed Metal Oxide Nanoparticles by Sol-Gel Method Synthesis of Transition Metal Oxide Based MgO Nanocomposites by a Simple Precursor Approach Effect of Rare Earth Doped Elements and Characterization of LaF3:Ln3+ (Ln3+= Ce3+, Pr3+, Nd3+) Nanocrystals Structural and Infrared Spectroscopy Study of Chemically Synthesized Sn1-xCoxO2 (0.00 x 0.05) Nanoparticles Chapter 4: Electronic Materials Characterization of Plasticized PMMA-LiClO4 Solid Polymer Electrolytes Dielectric Behavior and Impedance Spectroscopy of Ba1-xBixTi1-xFexO3 System Investigation on Glasses in Strontium Zinc Borosilicate System as Sealants for Solid Oxide Fuel Cell Effect of Rare Earth Gadolinium Substitution on the Structural, Microstructure and Dielectric Properties of Lead Free BNT Ceramics AC Conductivity and Dielectric Relaxation Studies of La0.95Sr0.05GaO2.975 Gallate Rietveld Refinement and DC Conductivity of Na0.5K0.5NbO3 Ceramics Plasmonics Properties of ZnO/Ag/ZnO Multilayer Thin Films Structural and Dielectric Properties of Na0.5Bi0.5TiO3 Ferroelectric Ceramics Spectroscopic and Electrical Studies of Ferrous Sulphate Doped Polyaniline Synthesis, Characterization and Electrical Conductivity Measurements of Polypyrrole/ Montmorillonite Nanocomposites Chapter 5: Energy and Smart Materials CNT-ZnO Nanocomposite Thin Films: O2 and NO2 Sensing Synthesis and Characterization of LiFePO4-C/ PANI Composite for Cathode Material of Lithium Ion Battery Conductivity Measurement of Calcia Stabilized Zirconia Prepared by Mechanical Route Preparation and Characterization Cu-Cr Contact Material and Study their Hardness and Conductivity Application of Graphene Oxide and TiO2 in the Fabrication of Dye Sensitized Solar Cells Module by Electrode Modification Structural, Optical and Ferroelectric Properties of BiCoO3:BiFeO3 Composite Films Modified Becke-Johnson Approach for Governing Half Metallic Ferromagnetism in Cr-Doped GaP DMS Compound Mn-Disorder Effect on Magnetism and Half Metallicity of NiCoMnGa Quaternary Heusler Alloy Ground State Electronic and Magnetic Properties of LaCrO3 System Absorbance and Fluorescence Spectral Analysis of Sm3+ Ions Doped Bismuth Boro-Silicate Glasses Synthesis of TiO2 Film for Dye-Sensitized Solar Cells Fe-P Soft Magnetic Properties of Iron for A.C. Applications Chapter 6: Composite Materials Physical and Mechanical Properties of Epoxy-Nanoparticulate Composite Adhesive Synthesis and Characterization of Particulate SiCp Reinforced Al-Si-Mg Alloy Composite with Varying Si Content Development of Mo and Ta Foil Reinforced (MoSi2 + 20 Vol% SiCp) Matrix Laminated Composites Mechanical and Dielectric Properties of PTSL FRP Composites Fabrication and Characterization of Aluminium Matrix Composites by High Velocity Oxy-Fuel Thermal Spraying Properties and Characteristics of Sisal Fibre Reinforced Composite The Effect of Aging on Energy Absorption Capability of Closed Cell Aluminum Foam On the Actuation Authority of Adaptive Sandwich Beam with Composite Actuators: Coupled Finite Element Analysis Impact Damage Detection in GFRP Laminates through Ultrasonic Imaging Application of Ball Indentation Technique for Mechanical Properties Estimation of Bi-Metallic Weld Chapter 7: Metal Casting Influence of Casting Process Parameters on Surface Roughness in Hot-Chamber Die Casting of AZ91D Mechanical Properties and Tensile Fracture Mechanism of Rheocast A356 Al Alloy Using Cooling Slope Designing of a Novel Shroud for Improving the Quality of Steel in Tundish Effect of Steel Making Slag on Castability of Medium Carbon Re-Sulfur Steel Grades Chapter 8: Mechanical Processing A Study of the Effect of Extrusion Parameters on the Properties of Extruded Zr-2.5Nb Pressure Tubes Microstructural Studies of Al 5083 Alloy Deformed through Cryorolling Influences of Temperature of Thermo Mechanical Working on Hardness of Titanium Alloy RETRACTED: Grain Growth Kinetics of Accumulative Roll Bonded AZ61 Alloy Mechanical Properties of Al6061 Processed by Equal Channel Angular Pressing Effect of Distance between Passes in Friction Stir Processing of Magnesium Alloy Effect of Cold Rolling on the Mechanical Properties of Spray Cast Al-6Si-20Pb Alloy Analysis of Bi-Axial and Tri-Axial State of Stresses in Plastically Deformed Solid Cylindrical Specimens under Dry Lubrication Strain Rate Sensitivity of Die Steel under Compressive Loads Parametric Study while Microchanneling on Optical Glass Using Microcontroller Driven ECDM Process Chapter 9: Materials Joining Correlation of Mechanical and Microstructural Properties in SMAW Welded Cr-Mo Boiler Steels Subjected to Different Post Weld Heat Treatment Soaking Times Mechanical and Microstructural Characterization of 8 mm Thick Samples of SS 316L by CO2 Laser Welding Effect of Post Weld Heat Treatment on Mechanical Properties and Microstructure of Nickel Based Super Alloy Welds Optimization of Process Parameters for Friction Welding of Bimetallic Welds Heat-Treatment Studies on Dissimilar Ti-Alloy EB Weld Joints Parametric Dependence and Characterization of Laser Brazed Copper-Stainless Steel Joints Modelling for SAW Square Butt Joints by Using ANFIS to Predict the Weldment Characteristics of Joint Transmission Electron Microscopy of Longitudinal Double Submerged Arc Weld (LDSAW) of X-120M Steel Line Pipe Joining of Mild Steel Plates Using Microwave Energy Chapter 10: Surface Engineering Developing and Characterizing Polyurethane-Nanoclay Coatings for Better Scratch & Mar Resistance Morphological and Hardness Studies of Electroless Ni-P-ZrO2 Nanocomposite Coatings on Mild Steel Hot Corrosion Studies of HVOF-Sprayed Cr3C2-NiCr Coating on 310S Stainless Steel in an Actual Environment of a Coal Fired Boiler Corrosion Resistance of a New Cu-Alloy (Low Ni) vis-a-vis Cu-10Ni Alloy in Sulfide Polluted Synthetic Seawater Effect of Deposition Parameters & Molybdenum Percentage on Nickel-Molybdenum Alloy Coatings Cladding of Tungsten Carbide and Stellite Using High Power Diode Laser to Improve the Surface Properties of Stainless Steel Preparation and Characterization of Thermal Spray Coating of Glass Microspheres on Metal Substrate Microstructural Features and Oxidation Behaviour of NiCrAlY Coatings Obtained by HVOF Process A Study on Ni-P and Ni-P-ZnO Composite Coatings Developed by Electroless Technique Study of Magnetic Abrasive Finishing Using Mechanically Alloyed Magnetic Abrasives Corrosion Performance of Mild Steel in Paper Mill Effluent Effect of Plasma Treatment on Surface Properties of Polymeric Membrane Microstructural Parameters in Electron Irradiated PVA Films by Wide Angle X-Ray Scattering Studies (WAXS) Effects of Surface Disordering on Optical & Mechanical Properties of Ar+ Implanted Polycarbonate High Temperature Degradation of Co Based Superalloy in Incinerator Environment Chapter 11: Tribology and Wear Prediction and Simulation of Erosion Wear Behavior of Glass-Epoxy Composites Filled with Blast Furnace Slag A Comparative Study of Cavitation Erosive Behaviour of 23/8N Nitronic Steel and 13/4 Martensitic Stainless Steel Tribological Performance of a Non Asbestos Organic Brake Pad Using Various Organic and Mineral Fibers Correlation of Reinforced Ceramicparticle's Nature and Size with Microstructure and Wear Behavior of Al-Si Alloy Composite Effect of Micro-Size Cenosphere Content on Friction and Dry Sliding Wear Behavior of Vinylester Composites - A Taguchi Method Tribological Characteristics of Aluminium Tri-Reinforced Particles (Al-TRP) Composites Developed by Liquid Metallurgy Route Improving the Tribological Properties of Mg Based AZ31 Alloy Using Friction Stir Processing Hardness and Wear Behavior of CoO Doped Fe-Al2O3 Metal Matrix Composite (MMC) Synthesized via Powder Metallurgy (P/M) Technique Evaluation and Development of Economically Viable Coatings for Erosion Protection of Hydroturbines

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB11526316
• ISBN:
  • 9783037855263
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: xiv, 604 p.
• 大きさ: 25 cm
• 件名:
  • FREE : Advanced materials processing
  • FREE : AMPCO
• 親書誌ID:
  • BA24926058