Manufacturing engineering and automation II : selected, peer reviewed papers from the 2012 International Conference on Manufacturing Engineering and Automation (ICMEA2012), November 16-18, 2012, Guangzhou, China

Author(s)

• International Conference on Manufacturing Engineering and Automation
• Zhang, Liangchi

Bibliographic Information

Manufacturing engineering and automation II : selected, peer reviewed papers from the 2012 International Conference on Manufacturing Engineering and Automation (ICMEA2012), November 16-18, 2012, Guangzhou, China

edited by Liangchi Zhang ... [et al.]

（Advanced materials research, v. 591-593）

Trans Tech Publications, c2012

• : [set]
• Part 1
• Part 2
• Part 3

Note

Includes bibliographical references and indexes

Description and Table of Contents

Description

Volume is indexed by Thomson Reuters CPCI-S (WoS). This work on the latest advances in, and applications of, manufacturing engineering and automation comprises 576 peer-reviewed papers selected (for quality and relevance) from the over 1000 papers originally submitted by universities and industrial concerns all over the world. The papers specifically cover the topics of modern design theory and technology, advanced manufacturing technologies, modeling, analysis and simulation of manufacturing processes, automation and control, materials science and technology and the dynamics of mechanisms and systems. Readers are thus provided with a broad overview of the latest advances in the field of manufacturing engineering and automation.

Table of Contents

Preface, Sponsors and Committees Chapter 1: Modern Design Theory and Technology Design and Analysis of Fan-Cooling for High Speed Permanent Magnet Machine Rotor CAD Modeling of Part Assemblies Using Reverse Engineering Technique Variant Design of Hydraulic Support Research on Multi-Objective Optimization Design of Thrust Vector Control Actuator Frictional Contact Problem Study on Compressor by a Parametric Quadratic Programming Method Evaluation Method for Conceptual Design Scheme Based on Fuzzy Mathematics Revolving Jet Nozzle Design on Eliminate Surface Soil of Shallow Submersion Design Methods of Pine Furniture On the Feasibility of Green Packaging from the Use of Bamboo The Green Design of Bracket of Scraper Part of Coal Mine Underground Horizontal Extension Transfer Machine The Design and Analysis of the Column of the Small Dual Fork Stacking Robot Research and Implementation of Variant Design for Longitudinal Roadheader's Cutting Unit Design of Compound Die for Flange Drawing Parts A Multi-Point Approach to Airfoil Shape Optimization Overview Design Method of MEMS Devices System Analysis and Design of the Reliability of a Wire Setting System Innovative Design of Pin Tumbler Lock Based on TRIZ Building Input File of MCNP 3D Model with Basic Graphics Exchange Specification The GREEN Design of Horizontal Type Transfer Machine for Underground Coal Mine Belt Department Force Analysis on the Opening/Closing Mechanism in the Door of Coal Hopper Car Based on the Matrix Method Product Form Design Based on the Symmetry Principle of Gestalt Compound Helicopter Optimum Design Based on Genetic Algorithm Structure Research on Carrying Frame in Portable Exoskeleton Make by Polyphenylene Sulfide The Research of Personalized Glasses Custom Design System A Design of a Small Self-Propelled Mower by Building the Key Curves Based on the Internal Structure The Form Beauty of Product Form Design - The Unity and Variety On the Three-Dimensional Relationship of Design, Consumption Psychology and Social Development in Green Packaging Plastic End Cap Injection Tool Design and Molding Analysis Based on Software Ug and Moldflow Optimization Design of the Crane Girder Based on Adaptive Genetic Algorithm Design and Analysis of Folding Mechanism for a New Folding Car Multidisciplinary Design Optimization for an Earth Observation Satellite Study on the Strength Design for Steel Hourglass Worm Pairs of Track Tension Adjustor on Special Vehicles Design of the Quad-Redundant Generators Based on CAN-Bus and Nonlinear PID Research on Similarity Scaling of Structure for Compressor Disc A Study on Using Plasticity Theory in the Design of the Transit Platform's Panel The Improved Design for Automatic Feeding Mechanism of the Injection Molding Machine for the Negative Electrode Shell of Li/Mn02 Button Cell Battery Based on TRIZ Confliction Theory Interface Design Based on Task Model of Tower Crane Security Monitoring and Management System An Introduction to Cloud Design Workshop Layout Optimization Based on Genetic Algorithm The Design and Implementation of Spacecraft Co-Simulation Platform Design and Characteristic Analysis of Variable Speed Hydraulic System Conceptual Design of Controllable Soft Start Device with Differential Planetary Gear-Trains Mechanical Structure Design of Vacuum Holder Disk Head Cleaning Machine Application of Value Engineering in Industrial Product Design Optimization of the FSAE Car Steering Trapezoid Performance Analysis of Infrasound Sensor InSAS2008 The Current Situation Analysis of Industrial Design and Development Management Proposal Based on Manufacturing in Central Regions A Study on Natural Bionics in Product Design Packaging Structure Optimization Design Based on Low-Carbon Packaging Idea The Design of Injection Mold for the Handset Based on Reverse Engineering Design and Analysis of Vacuum Coating's Filtration System A Method of Structure Analysis for Complex Small HAWT Composite Blade Design CFD Analysis and Blade Optimization of a Small Horizontal Axis Wind Turbine Design & Research of People-Oriented Office Chair Research and Design on the Special Tube Parts Stamping Technology and Die Development of Active Rehabilitation Device of Hand Joint Design of New Dual-Motor Independent Drive System for Electric Vehicle An Improved Design of the Manipulator on Automatic Tool Changer Development for CAD / CAM System of Modification Slotting Cutter's Design and Manufacture for High-Speed and Heavy-Loading Gear A Design of the Automatic Spray System of Belt Conveyor's Loading Point The NC System Design for Strengthening and Polishing Machine Rotogravure Printing Press Remote Maintenance System for Customer Service Support Research of Rapid Assembly for Standard Parts of Three-Dimensional Model Design and Pspice Simulation on Interface Circuit of Capacitive Micro-Gyroscope Research on Design and Test of Negative Pressure Isolator System for Infectious Disease Patients Based on Multi-Cavity Gasbag Structure Study on Matching Design of Motorized Wheel for Urban Electric Vehicle Design of Armored Vehicles Lead-Acid Battery State Monitoring System Chapter 2: Advanced Manufacturing Technology A Magnetic Drive Actuator for Micro Electrical Discharge Machining Laser Drilling on Elastomeric Polymers Performance of Cutting Tools in High Speed Milling of SiCp/Al Composites Performance Study on Miniaturized Rapid Denture Repair System Electrical Discharge Truing of a Vitrified Bonded Superabrasive Wheel with Electrical Conductivity The Performance of a Diesel Engine Blended with Coffee Bean Residue Pyrolysis Oil Surface Characteristic and its Mechanism of the Drilled CFRP Development of Zr-Ti-N Coatings for Micro Drills for Machining of PCBs The Study of High Speed Micro-Drilling Performance and Machining Quality of Coated Micro-Drills with Zr-C:H Coatings Study on Electromagnetic Repulsion Suspension of CNC Machine Guide System Effect of Injection Parameters on Immersion Liquid during Wafer Scanning The Optimization of Tooth Form Fitting Error on Worm Type Shaving Cutter Machining Feature Sequencing for Aircraft Structural Parts Fabrication of Taper Gap Warm End Heat Exchanger in Coaxial Pulse Tube Cryocooler The Orderly and Direction Study of Grinding Wheel Grits Based on Geomorphologic Feature Grinding Characteristics and Mechanism of Ceramic Alumina Wheels on Aeronautical Alloys Study on Free Shaving for Worm Type Shaving Cutter of Open Groove The Progress of Bionic AUV Stealth Technology Research Survey of Turn-Milling and Applications in Aviation Swing Mechanism for Micro EDM Drilling of Fuel Jet Nozzles Tool Path Calculation Based on the Actual Tool Profile The Dual Implementation of Lean and ERP in Manufacturing Temperature Measurement in Ultrasonic Vibration Mill-Grinding of Ceramics with Infrared Thermovision The Method Used for Process Precision Prediction of Micro-Assembly Based on Principle of Maximum Entropy Research on Feedrate Planning Model for Continuous Small Lines Contour with Look-Ahead Research and Improvement of Leakage Protection System in Coal Winning Machine Research on Vibration Drilling 1Cr18Ni9Ti Stainless Steel Micro-Hole Improvement of Hydraulic System of New Energy Saving Die Casting Machine The Research Progress of Automatic Drilling Technology Iso-Scallop Toolpath Generation for Orthogonal Turn-Milling of Ruled Surfaces One Effective Solution of Hot Swap Application Study on Effect upon the Roughness of Bearing Outer Ring from the Jet Pressure in the Strengthening and Polishing Process Coaxial Adjusting Method for Irregular Rotating Workpiece Traceability Method for Transmission Quality Problems Based on Contrast Analysis The Experiments Study of Polishing Characteristics during Polishing Process Coal Mine Underground Horizontal Extension Transfer Machine Study on High Speed Machining Strategies for Mold Application of Pre-Mixed Abrasive Water Jet Technology on Cutting Brazilian Disc Study on Wafer Thinning Characteristics of Ultimate Diamond Disk Parameters Optimization and Experimental Analysis in High Speed Machining Application Research on TorkBuster in Well Yashen 1 of Yumen Oilfield Research and Application of 9-5/8 Retrievable Casing Drilling Technology Optimization Method of Man-Machine Operating for Multi-Variety and Small Batch Production Study of a Electromagnetic Weft Insertion in Textile Machine Study on the Optimization of Conformal Cooling Channels for Plastic Injection Mold Optimization of EBW Parameters for 2219 AL-Alloy Using Grey Relation Method Study on the Wetting Device of GMS-7 Spine Taping Machine Research Advance on the Drying Section of Paper Machine Chapter 3: Modeling, Analysis and Simulation of Manufacturing Processes Modeling and Stability Analysis of SiCp/Al Composites Thin-Walled Workpiece in Rotary Ultrasonic Machining Micromechanical Modelling of Elliptic Vibration-Assisted Cutting of Unidirectional FRP Composites Dynamic Simulation on Feedwater Heater of Nuclear Power Plant Steady-State Load Analysis of a Caterpillar Chassis by Finite Element Method Safety Inventory under a Periodic Review System Analysis on Crack Propagation of Roll by the Finite-Element Modeling of Aircraft Composite Parts Using Simulation The Simulation and Study of Buffer Device of Hydraulic Cylinder Numerical Simulation on Diffusion Wear of Diamond Tool in Cutting of Ferrous Metals Finite Element Analysis on Convexity for Tapered Roller with Arc-Line Modification Profile 5-Axis Virtual Machining Technology Research on Integral Impeller under PROE and Vericut Environment Delay-Dependent Robust Stability Analysis for Uncertain Nonlinear Systems An Approach to Determine Clamping Forces and Clamping Sequence of Thin-Walled Workpiece during Milling Process Application of Error Analysis Method in the Complex Vehicle Model Temperature Field Simulation of Ballscrew Whirlwind Milling Study on Engine Characteristic Curves Drawing Method Based on BP Neural Network A New Method of Complex Logistics Planning Scheduling Based on Super Cubic Path Link Algorithm Study of the Transmission System of Spreading Powder Device of Direct Metal Sintering Rapid Prototyping Machine Numerical Simulation and Studies of Temperature Rise within a High-Pressure Vessel during Refueling Modeling and Simulation of the Hydraulic Height Adjustment System of Mobile Tail Based on AMESim Simulation Study on CMM Measuring Path Based on the CAD Models of Bevel Gear Dynamic Simulation on Secondary System of Nuclear Power Plant A Heuristic Algorithm for Flowshop Scheduling Problem Numerical Simulation of Gas-Liquid Tow-Phase Flow During Complex Mold Filling Process The Research of Cognitive Load in the Virtual Maintenance Training Simulation Study on Heat Transfer Performance of Engine Exhaust Valve Application of Virtual Prototyping Technology on Kinematical Simulation of Baler Compression Device The Research on Characteristics of Movement Coupling in Forging Manipulator Effect of Pin-Fin Heat Sink Structure and Irradiation Angle on High-Power LED Down-Light Thermal Performance The Research on the Movement Precision of Globoidal Cam Mechanism Based on Error Modeling The Research on Motion Reliability Simulation of Planar Linkage Mechanism Research on Model Reconstruction and NC Machining for Blade Based on Reverse Engineering Design and Kinematics Analysis of a New Two DOF Tilter Inverse Attitude Solution Model and Numerical Simulation of a 2-DOF Stabilized Platform The Optimization of Co-Dependent and Absolutely Additive System The Optimized Iterative Projection Method to Determine the Width of an Arbitrary 3D Object Study on Security Analysis and Management of Motor Based on Fuzzy Theory The Multi-Objective Optimization for Cycloidal Gear Drive Based on the Elastohydrodynamic Lubrication Theory Implementation of Decision Tree for Maintenance Policy Decision Making - A Case Study in Semiconductor Industry Implementation of Autonomous Maintenance in Semiconductor Industry: A Case Study Orthodontics Simulation and Finite Element Analysis of Submaxilla Dentition Analysis of Climbing Obstacle Capability and its Influential Factors of Omni-Directional Wheeled Robot Fatigue Analysis of MW Wind Turbine Top Flange Finite Element Analysis of Top Flanged Joint System of High Power Level Wind Turbine Optimization of Vehicle Handing and Stability Based on RSM Automobile Box Structure Optimization and Simulation Analysis of Support Reliability of Missile System Based on Neural Network Investigation of Fracture Criterion for HTPB Propellant The Study of Infrared Heating on PET Bottles by Experiment and Adaptive Finite Volume Method Dexterity Analysis of 6-dof 3-urps Parallel Mechanism Ant Colony Optimization for Factory Layout Abrasion Lives Simulation and Prediction of Key Parts for Breech Mechanism Based on Pro/E and ADAMS 3D Finite Element Analysis of Prestressed Cutting Research on High-Pressure Water Jet Target Object Detection Parameter Optimization 3-D Precise Modeling of Modified Gear Based on Visual Basic A Method to Calculate Tool Accessible Domain Based on the Point Model for the Multi-Axis CNC Machining The Research of Energy Saving Improved on Copper Anode in the Hydraulic System Based on AMESim Research on Support Vehicles Application New Materials of Coal Mine Belt Horizontal Extension by ANSYS Software Modeling and Enhancement of Mckibben Pneumatic Muscle Actuators Study on Simulation of the Chain Transmission Mechanism Investigation of Numerical Stability of Pipe-Flow Simulation under Strong Oscillation of Inlet Velocity Simulation of Laser-Induced Asymmetric Bubble with Lattice Boltzmann Method CNC Programming for 2D Image Modeling Developable Mesh Surface by Lofting Thermal Analysis of a Ball-Screw System An Obstacle Avoidance Method Based on Distance Fields in C-Space for Virtual Arm The Innovative Design and Simulation Analysis of Small Savonius Wind Turbine Unified Product Information Modeling Using Model-Based Definition Technology Ladle Transportation Car Frame Finite Element Analysis Analysis and Simulation of Flow Field in the Ultrasonic Auto Backwash Filter Research on the Wire Drawing Die Pass Parameter Calculation Based on the Least Square Algorithm Application Research of Data Warehouse in CRM The Design of Heart Sounds and Electrocardiogram Monitor System Based Atmega64 Study on Simulation & Evaluation of Radar Network Operation Capability in Complex Electromagnetic Environment Simulation of Spraying Trajectory Optimization for Helmet Chapter 4: Material Science and Technology Sliding Wear Characteristics of High-Performance Plasma Nitrided Bearing Steel Active Scalable Elastomer Mold to Ease Demolding of High Aspect Ratio Micro Features A New Method for Measuring the Residual Stresses in Multi-Layered Thin Film Systems Microstructure and Abrasive-Wear Behavior under High Temperature of Laser Clad Ni-Based WC Ceramic Coating The Interface Behavior of Micro Overmolding Impacts on the Particle Size and Shape of Silica Sands by Different Methods of Cooling Failure Analysis of Axle Sleeve Made from 2Cr13 Steel The Finite Element Analysis of Flow Field and Temperature Field in the Molten Pool of Surface Treatment by Electron Beam Atomistic Simulation on the Structure and Lattice Vibrations of Fe7-xCrxC3 Carbides Study on the Microstructure and Properties of Laser Remelted Ceramic Coatings on Low Carbon Steel Surface Influence of Sputtering Power on the Structure and Photoelectric Property of Ga Doped ZnO Films Study on the Abrasive Wear of Chromeplate Piston Ring and Cylinder Jacket Made by Different Materials Luminescence Properties and Energy Transfer of Sm3+-Eu3+ Co-Doped Gd2(MoO4)3 Red Phosphors Research on the Elastic Modulus of Single-Walled Carbon Nanotubes Functions of Step Gating System in the Lost Foam Casting Process Influence of Smoke on Metallographic Structure of Short Circuited Melted Mark Constitutive Modeling of the Rate-Dependent Behavior of Ti-6Al-4V Using an Arrhenius-Type Law The Influence of Different Subbase Materials on the Crack of Cement Stabilized Macadam Base during Construction An Experimental Study on Lubrication Behavior of Glass Lubricants during Hot Plastic Deformation of Ni-Based Alloys Experimental Inverstigation on Thermal Expansion Coefficients of SnO2 Thin Film Test on Electrical Conductinity of Oil Shale Thermodynamic Analysis of a Brown Glass Containing Fe, C and S The Responses of Soft Ground Materials Subjected to Dynamic Loading Preparation and In Vitro Degradation of PLGA/HA Composite Fiber Scaffolds by Electrospinning Study on the Tensile Testing Method of p-Phenylene Terephthalamid (PPTA) Fibers for Ballistic Protection Effect of Alloying Elements on the Microstructure and Properties of AZ91D-xCa-ySr Comparisons of Different Elastomer Micro Molds Preparation of Ni-Nd2O3 Nanocomposite Coatings by Electrodeposition under Dual-Frequency Ultrasound Simulational Study on Biaxial Tensile Test of the Envelope Material of Stratospheric Airship Study on Antireflection of TiO2-SiO2/SiO2 Double-Layer Films Prepared by Sol-Gel Method Research on the Relationship between the Impact Explosive Temperature and Mass Ratio of PTFE/Al Reactive Material Summary of Application of Chinese Copper-Clad Aluminum Wire Synthesis of Bauxite Based -SiAlON by Compound Reduction Nitridation Study on Corrosion Behavior of Various Steels Used by Ocean Wave Energy Equipment Microstructure and Creep Resistance of Mg-(8-12 Wt.%) Zn-(2-6 Wt.%) Al Alloys Finite Element Simulation on Micro-Forging Process Inhibiting Warping of the Thin-Walled Components Treated by Laser Cladding Preparation and Characterization of Polyacrylonitrile-Based Nanofibers by Electrostatic Spinning Corrosion Characteristics of 16Mn and Q235B Steel in Natural Seawater Dynamical Identification Model of Laser Cladding Height in Metal Parts Laser Shaping Process Tribological Properties and Worn Surface Analysis Generated by Sulfur- and Phosphorus-Free Molybdenum-Containing Water-Based Lubricant Glass Fiber Functional Warp Sizing Research on Creep Characteristics of the Double-Base Solid Propellant Influence of High-Frequency Micro-Forging on Surface Residual Stress of 304 Stainless Steel Sample Fabricated by Laser Prototyping Study of Oxidation Behavior of Zn and Fe Nanoparticles Study on Surface Hydrophilicity of Polypropylene Non-Woven Treated by Atmospheric Pressure Plasma Mechanical Properties and Dynamic Mechanical Behavior for Long Aramid Fiber Reinforced Impact Polypropylene Copolymer Friction Structure Effect Analysis of Granular Materials in Foundation Soil Thermal Property Measurement of Polymer Materials Failure Analysis of Stress Corrosion Crack of 1Cr18Ni9 Stainless Steel Cylinder Body The Effect of Scanning Velocity on AISI 304 Stainless Steel Laser Cladding Coatings Porous Metal-Fiber Sintered Felt by Multi-Tooth Cutting and Sintering- Morphological Analysis and Mechanisms Fretting Wear Behavior of Burnished Pure Copper under Oil Lubrication Effect of Thermal Treatment on the Physical Properties of Electrospun PVDF Membrane Alignment of Carbon Nanotubes in Polystyrene Using Vibration and Electric Field Study on Stress-Strain Model of Metallic Materials with Shot Peening Residual Stress Effects of Pure Water on the Tribological Properties of Self-Mated Titanium The Effects of Strong Oxidizing Slurry and Processing Atmosphere on Double-Sided CMP of SiC Wafer Laser Induced Forward Transfer Spectral-Domain Optical Coherence Tomography for Material Detection The Analysis of Fracture Mechanics on Self-Healing Composite Materials with Microcapsules Nonlinear Viscoelastic Analysis of Double Base Propellant Chapter 5: Control, Automation and Computer-Aided Systems Adaptive Control of Magnetic Drive Actuator for Laser Cutting Magnetic Detector Based on GMI Effect of Amorphous Wire Analysis of Wireless Energy Transfer System Using Magnetic Resonant Coupling Receiver Operating Characteristic for Diagnosis of Wine Quality by Bayesian Network Classifiers Design of a Servo Controller for Modularized Flexible Joint with Integrated Torque Sensors Based on SOPC A Novel Method for Alignment Calibration of IMU and Doppler Sensors Model-Free High Order Sliding Controller for Underwater Vehicle with Transient Process RCS Control Study Based on the Model Reference Adaptive Control Research of PMSM Rotor Absolute Position Detection System Based on AU6802N1 Adaptive Inverse Control of Hydro Electric Unit Based on Wavelet Neural Networks PID Control of Main Steam Temperature Used Quantum Particle Swarm Optimization LMI-Based Robust Control of Norm-Bounded Uncertain Perturbed Discrete Systems with both State and Input Delays Study on Shift Schedule of Pure Electric Vehicles Automatic Transmission Low-Dimensional Approximation for Control of Spatio-Temporal Processes Using Principal Interaction Patterns Research on Key Technologies of the Cableless Pipeline Robot Passivity-Based Tracking Control Design for Underactuated Mechanical Systems Error Compensation for Single Pair-Pole Encoder Based on Ellipse Hypothesis Wireless Remote Control Design of the De-Icing Robot Research on Data Acquisition System of Ship Measurement and Control Device Check Equipment The Design of Variable Frequency and Constant Pressure Water Supply System Based on Fuzzy Control The Optimization Layout Method of Intelligent Roadside Sensor System in Traffic Management and Control Automatic Calibration of the 3D Vector Magnetometer Design and Optimization of Elastic Diaphragm in Miniature High-Temperature Pressure Sensor Automatic Alignment of 3D Point Clouds to Orthographic Images Propulsion-Force Optimized Control of Linear Induction Motor for Urban Transportation System Considering Material Change of Reaction Plate A Video Test Sequences Generation Way for Behavior Recognition Based on Cloud Model A Camera Calibration Method Using Quadratic Curve Fitting Agile Turn Control for Air-to-Air Missile Based on Reaction Jet Control System The Research of Automobile Automatic Stabilizer Bar Control System and Test Platform Design and Implementation of Control System in Ultrasonic Detection Machine for Plate Part High-Order Distributed Consensus with One-Bit Adaptive Quantization A Design of Intelligent Illumination System Based on LonWorks Energy-Saving Applying Study of Fuzzy Control in the Variable Frequency and Constant Pressure Water Supply System Power Short-Term Load Forecasting Based on QPSO-SVM Control and Stability Analysis of Multi-Joint Manipulator under Constraints Based on Riemannian Geometry Study on Improved PCA-SVM Model for Water Demand Prediction Research on In-Vehicle FlexRay Bus Network Nodes A New Numerical Control System Based on ARM Microprocessor A New Way of Ultra-Wideband Channel Estimation Based on Bayesian Compressive Sensing Design of the Advanced Automatic Door Controller Based on PLC The Trouble-Shooting for the Over-Current in AC Inverter of Tanker Switching Control Methods for Expressway Ramp Metering Based on Hybrid Automaton Model Short-Term Electricity Price Forecasting Based on MPSO-BP Algorithm The AGV Controller System Design Based on CPAC Non-Sinusoidal Injection Control Strategy of Z-Source Inverter USB Flash Disk Recorder Based on STM32 Bringing Path Planning and Lean Automation Together A Modified Binary Quantum-Behaved Particle Swarm Optimization Algorithm with Bit Crossover Operator Research on Attitude and Position Tracking Algorithm of Drill Bit for Underwater Mud-Penetrator Walking Motion Generation and Validation of Biped Humanoid Robot Study on 3-D Laser-Scanning-Based Machine Vision System for Robotic Construction Vehicles Photon Counter Implemented by Field Programmable Gate Array The Simulation of the UAV Collision Avoidance Based on the Artificial Potential Field Method Design and Research of Energy Saving Control System for Heating Network Implementation of a Voice Dialing System Based on HTK Analog Circuit Fault Diagnosis Using AdaBoost with SVM-Based Component Classifiers A Design of Path Planning System for UP6 Industrial Robot Based on Machine Vision FBG Intrusion Recognition Algorithm Based on SVM Analysis for SCR Control System Based on ANN Pseudo Multi-Hop Distributed Consensus with Adaptive Quantization Quadruped Robot Omni-Directional Walking on a Slope Based on Static Balance The Design and Simulation of Voltage and Reactive Power Fuzzy Controller in Substation Stochastic Admissibility for a Class of Nonlinear Singular Markovian Jump Systems with Time-Delay Hybrid Neural Network Models of Six-Axis Force Sensor Mechanical Analysis of the Jumping Motion of a Spherical Robot Research on Dissolved Oxygen Intelligent Control System in Waste Water Treatment Application of Fourier Analysis to the Outline of Object A Sensor of Aero-Engine Real-Time Fault Detection System Based on ARM9 Multi-Sensor Cooperative Tracking Using Distributed Nash Q-Learning Research on Data Processing Method of Three Dimensional Machine Vision System Backstepping Adaptive Fuzzy Control for Permanent Magnet Synchronous Motor Servo Systems Study on Multivariable System Based on PID Neural Network Control Robust Stabilization of Stochastic Singular Systems with Markovian Switching Design of Wireless Temperature Measurement System for High Voltage Electrical Equipment Consensus of Singular Multi-Agent Systems with Continuous-Time Dynamics Study on the Addressing Mode of Assembly Language Instruction Set of 80C51 MCU The Steam Generator Water Level System Based on Nonlinear First Order ADRC Control Sliding Mode Control of Pendulum-Driven Spherical Robots Research on the Wi-Fi Protocol Intelligent Automatic Meter Reading System Data Acquisition Design Based on the STM32 LADRC Control for the Three-Phase Voltage-Type PWM Rectifier Design of the Controller for PCMC Forward Converters Study on Comprehensive Performance Testing Table and Intelligent Measuring Technology of Constant Velocity Universal Joint Assembly Dynamic Modeling of Industrial Robot Based on Support Vector Machine Regression Algorithm A S-Shape Curve Speed Control Algorithm of Continuous Micro-Lines Interpolation Based on Adjustable Feed-Speed Stabilization Analysis of Switched Affine System Applied to Dc-Dc Converters Pre-Estimating Dynamically the Optimum of Extremum Value Control System with Large Time Delay Element Based on Correlation Identification Optimal Control of a Nuclear Reactor in Load Follow Based on LQG/LTR Wiener Filter Based on the Image to Blur Radiation Resistance Experiments of Image Sensor and Acoustic Sensor Pseudo Two-Hop Distributed Consensus Algorithm with Link Failure Design of Grid Connected Parallel Inverters with Interleaved Phase Shift by Using CAN Bus Design on Parameters of Power Circuit of AC Servo System Joint Combat System of Systems Modeling and Effectiveness Analysis Based on Complex Networks The Direct Kinematics Solution of the 6-RSPS Simulator Platform with BP Networks Pseudo Two-Hop Distributed Consensus Algorithm under Directed Topologies The Analysis of Wire Rope Tension Sensor Elastic Body Based on Solidworks Based on the Point Cloud Data of Columnar Structures to Tilt Analysis The Switch Control of Double-Power Supply System Based on Intelligent Static Switch Flocking Control under Virtual Leader-Follower with Link Failure Second-Order Consensus Filtering Algorithm The Summary of AGV Guidance Technology The Research and Design of Liquid Level Control System Based on Computer Nerve Network The Drawing Simulation for Configuration of the Articulated Industrial Robot Based on UG A Simple Data Acquisition Software for Serial Devices Based on Excel VBA and its Application in Rotary Kilns Simulation Research on the Control Performance of CVT Starting-Clutch Direct Torque Control of Brushless DC Motor Feedback Linearization Control of Pmssm Based on Svpwm Application of TMS320LF2407A and CAN Bus Technology in Flow Control of Inverter Based on Single Chip Microcomputer Heating Temperature Automatic Control System An Intelligent Bullet Counter Based on UV Electro-Optical Technology Position Tracking Control for Water Hydraulic Vane Actuator The Application of Kano Map in the Design of Relay Logic Control Circuits Study on Navigation of Wireless Sensor Network Mobile Robot Application of Zero-Vector Control to Three-Phase Inverter Design of Human-Simulation Intelligent PID Based on APMP Refiner Control The Optimization of Mechanical and Electrical Integration Linear Output Transmission System with Sensor Function The Application of RAM Analysis in a CNC System Test Analysis of a Six-Wheel Hydraulic Active Suspension Control System Research on the Application of the Electro-Hydraulic Digital Valve Control in the Lifting Device Study of the Engineering Vehicles of Automatic Transmission Shift Schedule Based on Fuzzy Neural Network A Study on Servo System of Radar Tracking Fast Targets Development of Automatic Tracking Plasma Spray Welding System of Triple Eccentric Butterfly Valve Numerical Simulation of Pulsating Flow over Blood Vessel Robot The Decision-Making for Fault Diagnosis Based on Consistent Approximation Space The Design of Jet Vane of Thrust Vector Control System A New Control Method of Active Absorption Wave-Maker Research on Thermal Tactile Perception of Human Fingertips Using Temperature Control Device Application of PDA Industry Data Acquisition System in Analysis of the Reason of Strip Blocked in Hot Mill Toyota Prius Control Strategy Experiment Analysis A Method of Constructing Electric Power Data Warehouse Based on Cloud Computing Vehicle Active Chassis Integrated Control Based on Multi-Model Intelligent Hierarchical Control A Novel Three-Phase AC/AC Converter Using Six Switches Chapter 6: Navigation Systems, Monitoring and Detection Technology Process Monitoring and Fault Diagnosis of Penicillin Fermentation Based on Improved MICA Design Scheme of Outside Environmental Monitoring System for Coal Mine Mobile Refuge Chamber Comparison on Three Filter Methods in Self-Alignment for SINS of the Carrier Craft Novel Label-Free Cells Structure Detection Method Study Based on Mie Scattering Principle Initial Alignment on Moving Base for GPS/INS Integration with the Effect of Time Asynchronous Road Edges Detection of a Novel Travel Aid for Visual Impaired People The Application of Coal Cleaning Detection System Based on Matlab Image Processing A Ship GPS/DR Integrated Navigation System Image Edge Detection Based on Multi-Structure Elements and Nonsubsambled Contourlet Transform Research on Independent Coarse Alignment of Aircraft Carriers SINS Study on Investigation of Underground Metal Object with Transient Pulse Electromagnetic Method WI-FI in Mine Ventilation Monitoring System Hydraulic Focusing Stability Detection Method Study Based on Digital Image Processing Technology Study on High-Grade CNC Machine Tool Wear Monitoring Methods and Experimental System Development of Signal Conditioning Circuit of a New Strain-Crack Detecting System Study on Multi-Parameter Monitoring Instrument Based on GSM Network Research on Substation Transformer Monitoring System with GSM Network Application in Deformation Monitoring Signal Based on Wavelet Modular Maximum Algorithm Design and System Realization of Real-Time Monitoring of High Voltage Lines Development of Quantitative Analytical Instrument for Colloidal Gold Strips Chapter 7: Dynamics of Mechanisms and Systems 3D Solid Finite Element Modeling and Rotordynamics of Large Rotating Machines: Application to an Industrial Turbo Engine The Spectral Leakage Minimization of Spectrum for Motor Fault Analysis Using Adaptive Multi-Taper Method Optimal Design of Vehicle Power-Train Mounting System Based on Improved Particle Swarm Optimization Software Development for Testing and Evaluating Online Dynamic Performance of CNC Machine Tool FLUENT/SIMULINK Collaborative Simulation for Missile Separation from Cavity A Method for Sheath Flow Forming, Controlling and Detecting Adaptation of Gershgorin Disk for Motor Fault Analysis Simulation Study of Vehicle Brake Stability Control on Turning Lane Based on ABS The Relationship between Contact Angle Difference and Equivalent Conicity of High-Speed EMU The Noise Test System and Solution Measures of Vibration Test Vibration Analysis of a Shell Structure by Finite Element Method Dynamic Responses of Supercavitating Vehicles under Non-Stationary Random Excitation Research on Prognostics and Health Management System for Self-Propelled Gun Numerical Computation of Acoustic Field Using Boundary Mesh Less Method Numerical Calculation of Hydrodynamic Interference Coefficients between Hull, Rudder and Propeller Dynamic Parameters Estimation Based on Set Inversion and Interval Analysis Algorithm Fault Detection of Electric Motors Application Using ML Estimation Method Simulation Analysis of Control Strategy for TLT Wheel Coordination Based on Constant Pressure Network Comparison of Two Two-Equation Turbulence Model Used for the Numerical Simulation of Underwater Ammunition Fuze Turbine Flow Field Research on Operation Stability Deterioration Trend Prediction Faced to Wind Power Group The Effects of Ply Angle of Laminated Composite Plates on Wind Induced Vibration Application of Support Vector Machine Regression in Failure Analysis of Fan Pump in Amphibious Assault Vehicles Fault Diagnosis of Induction Motor Based on Wavelet Packet Analysis and Negative Selection Algorithm Research on Similarities between Abnormal Rotor Model and the Prototype Based on Dynamic Similarity Analysis and Training in Sanda Movement Rotor Inertia Biological Mechanics The Transient Characteristerics Evaluation of Dynamic Environmental Test of Satellite Experimental Study on Deck-Temperature-Rising Technology in Different Deck Area Research on Balancing Method for Inertia Force of Slider-Crank Mechanism with Small Linkage Ratio Analysis and Control of Vibration Generated by High-Speed Spindle System Improved EEMD on the Application Research of Signal Trend Analysis Studies on Dynamic Parameters of Intellectual Vibratory Roller The Finite Element Simulation of Crack Growth of a Wind Turbine Blade Dynamics Response of Rails for Electromagnetic Launcher with Acceleration Load Vibration Analysis of Pumps Units Based on Fuzzy Matter-Element Study on Fault Diagnosis of Rotating Machinery Based on Lyapunov Dimension and Exponent Energy Spectrum Study of Data Fusion Method for Fault Diagnosis Based on FDR Feature Selection Algorithm and HMM/SVM Model The Effect of Tension for Belt Drive Rotary Motion Error The Progress of the Study on Fan Noise Reduction Technology The Systematic Thinking of Traffic Accident Vehicle Brake Performance by Road Test Verification Verification of FLUENT in the Computation of Supersonic Inlet Numerical Analysis on the Pressure Distribution of Long Oblate Chimney Application of EMD to Integrated Signal Trend Extraction Research on the Equipment-Oriented Faults Diagnosis Expert System Analyses of Error and Precision of 6-DOF Platform Analysis of Turbines Vibration and Treatment Measures during the Commissioning A Brief Analysis of Vibration on the Printing Area in Ordinary Offset Press Blasting Demolition Technology and Vibration Monitoring of Two 90m-High Cooling Towers in Complex Environment Modal Analysis on Transmission Gear Train of Planetary Reducer Noise and Vibration Analysis of the Precision Grinder Hydraulic Station Model for Unanticipated Fault Detection by OCPCA A Systematic Research on Reconstructing the Accident Velocity with Braking Traces Fault Diagnosis of Rotating Machineries and its Development Trend An Identification Method of Appearances and Expansion of Fatigue Crack in the Wind Turbine Blade Based on Fractal Feature Wavelet Selection in Fault Diagnosis of Wavelet Transform Development of Automatic Stimulating Cell System Using Mechanical Vertical Force A Study of Hybrid Optimization of Injection Moulding Process Parameters for Plastic Gear Application of Non-Circular Planetary Gear Mechanism in the Gear Pump Study on the Effect of Brush Roller to Blanket Electro-Hydraulic Proportional Flow Valve Control Complex Variable Pump and Research its Property for Injection Machine Hydraulic System The Method on Acceleration Extraction from Strapdown Airborne Scalar Gravimeter Based on Flight Dynamics Inquiry Process of a New Transmission Mechanism Analysis of Bulging Application in the Wind Power Bearing Ring Production On the Kinematics and Statics of Planetary Simple Gear Reducers Chapter 8: Engineering Education The Construction and Practice of Teaching Method for Mechanical Principles Integration Course Based on CDIO Integrated Model of the TRIZ Theory and Research-Oriented Teaching Group Decision-Making Oriented Civil Engineering Undergraduate Education Reform in China College Teaching Quality Evaluation Model Based on BP Neural Network Thinking of Engineering Graphics Teaching Management Model and Teacher Team Building Strengthen Practice Reform of Professional Teaching and Cultivate Students' Project Practice Ability The "Nexus" Teaching Method in Mechanical Engineering Courses Exploration and Practice of "Six in One" Ability Cultivation System of Independent College Students Exploration on Teaching Reform and Innovation of Material Mechanics Exploration and Consideration on the Curriculum Construction of Processing Technology of Paper Box and Carton Teaching Reform of Numerical Control Machine Tools and Programming Based on Modern Engineering Education The Internet-Based Electrical Engineering Virtual Lab: Using Load-Balancing Cluster System PCMM Model Analysis and Development Capability Fuzzy Evaluation System Research in Teaching Team of Automobile Specialty in Higher Vocational College The Research and Practice of Innovative Training Methods on Computer and Related Majors Integrating and Sharing of Instructional Resources for Local Colleges Based on Cloud Computing Study on Problems and Strategies of Personnel Training in Modern Logistics Reflections on the Training of Outstanding Engineers The Teaching Design for Mechanics-Electronics- Hydraulics Integrated Experiment Based on Learning Psychology Conception of Mechanical Engineering Training System by Trinity of Engineering Project, Workplace Environment and Industry-University Cooperation Thinking and Suggestions on Engineering Mechanics Teaching Based on "Education and Training Program of Excellent Engineer" A Study on the Teaching of Basic Specialized Courses Based on the Cultivation of Practical Engineering Capabilities Extending Mechatronic Innovative and Practical Training Curriculum to Sophomore Undergraduates Research into the Training of College Students' Abilities to Create, Innovate and Pioneer Research and Practice of Steady Enhancement on Innovation Ability of Mechanical Engineering Students The Exploration and Practice of Applied Talents Cultivation Based on "Engineering with a Big E." Quality Evaluation of Specialty Employment for Engineering Education The Research of Engineering Quality Cultivation Strategy in Engineering Education The Tao: What Engineering Education Should Concern - Teachings from Tao Te Ching The Research and Practice of Three-Dimensional Innovation Talents Development Model in Engineering Education Using WebQuest Approach in EFL for Project-Based Course Design Training Mode of Agricultural Engineering Talents Based on Industry Innovating the Educational Mode of Multi-Level Cooperation, Cultivating Personalized Mechanical Engineers Research on Training Mode of Higher Engineering Education Construction of Mechatronics Engineering Talents Cultivation System Based on Local Economy Research into College Students' Pioneering Education Development of the Practice Teaching Project in Machine Design Based on CDIO Engineering Education Model Current Situation of Applied Graduation Design and Countermeasures Study on Solving Ways of the Problems in University Course Syllabus Exploration on Experiment Teaching Reform Based on CDIO Engineering Theory Researches and Practices of "Interchangeability and Technology Measurement" Based on the Training Pattern of Excellence Program Study on China's Engineering Education Reform The Application of E-Portfolios in Designing Alternative Assessment System for Foreign Language Education Teaching Reform Research of Mechanical Drawing Based on the Theory of CDIO Strengthen the Training of Metalworking Practice for Promoting Excellent Ability Research on Accreditation System of Higher Engineering Education Innovation on "Machinery and Equipment" Classroom Teaching for the Cultivation of Excellent Engineers Building a New Training Model of Practice Teaching Based on "Plan for Educating and Training Outstanding Engineers" Study on Strategy-Based Total Budget Management System of Private Higher Learning Institution in China Implementing Collaborative Innovation Accelerating Multi-Cooperation for Vocational Colleges Research on Design Knowledge Acquisition of Manipulator Based on Adaptive Genetic Algorithm Employment Situation Investigation of Graduates Major in Mechanics Learning Foremost Knowledge of Fluid Mechanics with Multiple Representations Chapter 9: Related Themes Experimental Analysis of Polymer Injection Ability under Constant Pressure and Speed A Rapid Maneuver Method with High Accuracy for Spacecraft Based on CMG and RW Study of the Modeling of Incentive Air Pressure Waves to the Human Ear Contour Extraction of Inclusion Image with Mumford-Shah Model Wall Socket Fire Analysis Influencing Factors for NOx Reduction by SCR The Chloride Ion Penetration Model Coupled with Temperature and Moisture Transfer in Marine Environment Exponential Asymptotic Stability of a Repairable System with Two Identical Components Analysis of Low-Carbon Economic Benefits of Wind Power Projects in Yunnan Province Discussion about the Efficient Management and Control of Construction Projects' Cost Diagnostic Strategy Optimization Based on Predatory Search Algorithm Safe Comprehensive Evaluation of Fully Mechanized Mining Face Based on Fuzzy Matter-Element Relationship Study of Absorption Capacity, Degree of Innovation and Innovative Performance in Textile and Garment Enterprises Semantic Based Intelligent Resource Service Composition Technology Research on the Dangerous Quality of Roasting Lighter for Electric Heater Constitutive Model Based on the Multiplicative Decomposition of Deformation Gradient in Arbitrary Orthogonal Coordinate System Research on Planning of Logistics System in the Material Support Base for Emergency Artificial Bee Colony Algorithm for the Parallel Test Tasks Scheduling Research on Decision-Making Method for Suppression of Air Defenses of Virtual Target for the Radar Simulator Image Conversion from DICOM into Bitmap Based on VC Platform The Improvement of Wavelet Packet for Psychoacoustic Model Accurate DOD Measurement Using Ranging Tone of China CE'2 Simplification of the Parametric Transformation Equations for Analysis of Plane Stress User-Group Requirements Based Approach for the Standardization of Parts Using Parameter Joint Model to Predict the Grain Yield of Guangxi Province Dynamic Behavior on Emergency Landing of Light Aircraft with Occupant Restraint System Research on the Selection of Modes of Recycling End-of-Life Appliances Based on AHP Testing Technology of Subsea Christmas Tree Study on the Relation of the Furniture Product Form and Modeling Elements Research of Modular Experimental Production System Application of IRP Technology in the Informatization Construction of Vehicle Maintenance Support Double-Layer Fuzzy Synthetic Evaluation Model of the Colour Comfort Degree in Industrial Circumstance Study on Correlation between the Starch Content of Potato Tuber and its Viscoelastic Characteristics The Error Analysis of Water Cut of Crude Oil The Research of Remaining Oil Distribution in High Water Cut Oilfield The Convergence Rate with Bootstrap for Multidimensional Density Functional Kernel Estimation Digital Watermarking Based on Two-Way Arnold Transform and QR Code Technical Factors' Measurement and Simulation in the Equipment's Stability Investigation Development Trend of Car Painting Technology The Research of Factors which Effect B2C E-Commerce Trust - Based on the Mechanism of Process Study on the ESC Steady-State Cycle Experiments of SCR System for Reducing NOx Emissions Application in Testing of Bullet Ballistic Parameters Based on Linear Charge Coupled Device Roundness Error Measurement of Shaft Parts Based on Virtual Instrument Ontology-Based Semantic Description for Substation Devices Stochastic Optimal Dispatch Model Considering Security Risk Constraint Influence of Magnetic Field on Aqueous NaCl Solutions: A Foundational Research on the Desalination Method Based on the Rotating Electromagnetic Effect Research on Evaluation of Leather Handle Property Based on PNN Neural Network Power System Stochastic Economic Dispatch Considering Uncertain Discharge Capacity from V2G Experimental Improvements of Accident Investigation Report Coupled Shape and Reentry Trajectory Optimization of Entry Vehicle for Lunar Return Self-Organization System Framework of Enterprise Information System Based on CAS Self-Reduction Quiescent Current Low Power Low Dropout Regulator for SoC Application Study on Method of Key Target Tracking Parameter Matching A Design of Cascaded Multilevel Inverter Snubber Circuit Study on Developing Data Depot for the Equipment Support Research on Feature Selection Based on Improved Particle Swarm Optimization Three-Dimensional Elastic Solution of a Transversely Isotropic Functionally Graded Rectangular Plate

by "Nielsen BookData"

Details

• NCID: BB11527421
• ISBN:
  • 9783037855300
• Country Code: sz
• Title Language Code: eng
• Text Language Code: eng
• Place of Publication: Durnten-Zurich
• Pages/Volumes: 3 v. (2690 p.)
• Size: 25 cm
• Subject Headings:
  • FREE : Manufacturing engineering
  • FREE : Automation
  • FREE : ICMEA
• Parent Bibliography ID:
  • BA24926058