Manufacturing engineering and automation II : selected, peer reviewed papers from the 2012 International Conference on Manufacturing Engineering and Automation (ICMEA2012), November 16-18, 2012, Guangzhou, China
Author(s)
Bibliographic Information
Manufacturing engineering and automation II : selected, peer reviewed papers from the 2012 International Conference on Manufacturing Engineering and Automation (ICMEA2012), November 16-18, 2012, Guangzhou, China
（Advanced materials research, v. 591-593）
Trans Tech Publications, c2012
- : [set]
- Part 1
- Part 2
- Part 3
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This work on the latest advances in, and applications of, manufacturing engineering and automation comprises 576 peer-reviewed papers selected (for quality and relevance) from the over 1000 papers originally submitted by universities and industrial concerns all over the world. The papers specifically cover the topics of modern design theory and technology, advanced manufacturing technologies, modeling, analysis and simulation of manufacturing processes, automation and control, materials science and technology and the dynamics of mechanisms and systems. Readers are thus provided with a broad overview of the latest advances in the field of manufacturing engineering and automation.
Table of Contents
Preface, Sponsors and Committees
Chapter 1: Modern Design Theory and Technology
Design and Analysis of Fan-Cooling for High Speed Permanent Magnet Machine Rotor
CAD Modeling of Part Assemblies Using Reverse Engineering Technique
Variant Design of Hydraulic Support
Research on Multi-Objective Optimization Design of Thrust Vector Control Actuator
Frictional Contact Problem Study on Compressor by a Parametric Quadratic Programming Method
Evaluation Method for Conceptual Design Scheme Based on Fuzzy Mathematics
Revolving Jet Nozzle Design on Eliminate Surface Soil of Shallow Submersion
Design Methods of Pine Furniture
On the Feasibility of Green Packaging from the Use of Bamboo
The Green Design of Bracket of Scraper Part of Coal Mine Underground Horizontal Extension Transfer Machine
The Design and Analysis of the Column of the Small Dual Fork Stacking Robot
Research and Implementation of Variant Design for Longitudinal Roadheader's Cutting Unit
Design of Compound Die for Flange Drawing Parts
A Multi-Point Approach to Airfoil Shape Optimization
Overview Design Method of MEMS Devices System
Analysis and Design of the Reliability of a Wire Setting System
Innovative Design of Pin Tumbler Lock Based on TRIZ
Building Input File of MCNP 3D Model with Basic Graphics Exchange Specification
The GREEN Design of Horizontal Type Transfer Machine for Underground Coal Mine Belt Department
Force Analysis on the Opening/Closing Mechanism in the Door of Coal Hopper Car Based on the Matrix Method
Product Form Design Based on the Symmetry Principle of Gestalt
Compound Helicopter Optimum Design Based on Genetic Algorithm
Structure Research on Carrying Frame in Portable Exoskeleton Make by Polyphenylene Sulfide
The Research of Personalized Glasses Custom Design System
A Design of a Small Self-Propelled Mower by Building the Key Curves Based on the Internal Structure
The Form Beauty of Product Form Design - The Unity and Variety
On the Three-Dimensional Relationship of Design, Consumption Psychology and Social Development in Green Packaging
Plastic End Cap Injection Tool Design and Molding Analysis Based on Software Ug and Moldflow
Optimization Design of the Crane Girder Based on Adaptive Genetic Algorithm
Design and Analysis of Folding Mechanism for a New Folding Car
Multidisciplinary Design Optimization for an Earth Observation Satellite
Study on the Strength Design for Steel Hourglass Worm Pairs of Track Tension Adjustor on Special Vehicles
Design of the Quad-Redundant Generators Based on CAN-Bus and Nonlinear PID
Research on Similarity Scaling of Structure for Compressor Disc
A Study on Using Plasticity Theory in the Design of the Transit Platform's Panel
The Improved Design for Automatic Feeding Mechanism of the Injection Molding Machine for the Negative Electrode Shell of Li/Mn02 Button Cell Battery Based on TRIZ Confliction Theory
Interface Design Based on Task Model of Tower Crane Security Monitoring and Management System
An Introduction to Cloud Design
Workshop Layout Optimization Based on Genetic Algorithm
The Design and Implementation of Spacecraft Co-Simulation Platform
Design and Characteristic Analysis of Variable Speed Hydraulic System
Conceptual Design of Controllable Soft Start Device with Differential Planetary Gear-Trains
Mechanical Structure Design of Vacuum Holder Disk Head Cleaning Machine
Application of Value Engineering in Industrial Product Design
Optimization of the FSAE Car Steering Trapezoid
Performance Analysis of Infrasound Sensor InSAS2008
The Current Situation Analysis of Industrial Design and Development Management Proposal Based on Manufacturing in Central Regions
A Study on Natural Bionics in Product Design
Packaging Structure Optimization Design Based on Low-Carbon Packaging Idea
The Design of Injection Mold for the Handset Based on Reverse Engineering
Design and Analysis of Vacuum Coating's Filtration System
A Method of Structure Analysis for Complex Small HAWT Composite Blade Design
CFD Analysis and Blade Optimization of a Small Horizontal Axis Wind Turbine
Design & Research of People-Oriented Office Chair
Research and Design on the Special Tube Parts Stamping Technology and Die
Development of Active Rehabilitation Device of Hand Joint
Design of New Dual-Motor Independent Drive System for Electric Vehicle
An Improved Design of the Manipulator on Automatic Tool Changer
Development for CAD / CAM System of Modification Slotting Cutter's Design and Manufacture for High-Speed and Heavy-Loading Gear
A Design of the Automatic Spray System of Belt Conveyor's Loading Point
The NC System Design for Strengthening and Polishing Machine
Rotogravure Printing Press Remote Maintenance System for Customer Service Support
Research of Rapid Assembly for Standard Parts of Three-Dimensional Model
Design and Pspice Simulation on Interface Circuit of Capacitive Micro-Gyroscope
Research on Design and Test of Negative Pressure Isolator System for Infectious Disease Patients Based on Multi-Cavity Gasbag Structure
Study on Matching Design of Motorized Wheel for Urban Electric Vehicle
Design of Armored Vehicles Lead-Acid Battery State Monitoring System
Chapter 2: Advanced Manufacturing Technology
A Magnetic Drive Actuator for Micro Electrical Discharge Machining
Laser Drilling on Elastomeric Polymers
Performance of Cutting Tools in High Speed Milling of SiCp/Al Composites
Performance Study on Miniaturized Rapid Denture Repair System
Electrical Discharge Truing of a Vitrified Bonded Superabrasive Wheel with Electrical Conductivity
The Performance of a Diesel Engine Blended with Coffee Bean Residue Pyrolysis Oil
Surface Characteristic and its Mechanism of the Drilled CFRP
Development of Zr-Ti-N Coatings for Micro Drills for Machining of PCBs
The Study of High Speed Micro-Drilling Performance and Machining Quality of Coated Micro-Drills with Zr-C:H Coatings
Study on Electromagnetic Repulsion Suspension of CNC Machine Guide System
Effect of Injection Parameters on Immersion Liquid during Wafer Scanning
The Optimization of Tooth Form Fitting Error on Worm Type Shaving Cutter
Machining Feature Sequencing for Aircraft Structural Parts
Fabrication of Taper Gap Warm End Heat Exchanger in Coaxial Pulse Tube Cryocooler
The Orderly and Direction Study of Grinding Wheel Grits Based on Geomorphologic Feature
Grinding Characteristics and Mechanism of Ceramic Alumina Wheels on Aeronautical Alloys
Study on Free Shaving for Worm Type Shaving Cutter of Open Groove
The Progress of Bionic AUV Stealth Technology Research
Survey of Turn-Milling and Applications in Aviation
Swing Mechanism for Micro EDM Drilling of Fuel Jet Nozzles
Tool Path Calculation Based on the Actual Tool Profile
The Dual Implementation of Lean and ERP in Manufacturing
Temperature Measurement in Ultrasonic Vibration Mill-Grinding of Ceramics with Infrared Thermovision
The Method Used for Process Precision Prediction of Micro-Assembly Based on Principle of Maximum Entropy
Research on Feedrate Planning Model for Continuous Small Lines Contour with Look-Ahead
Research and Improvement of Leakage Protection System in Coal Winning Machine
Research on Vibration Drilling 1Cr18Ni9Ti Stainless Steel Micro-Hole
Improvement of Hydraulic System of New Energy Saving Die Casting Machine
The Research Progress of Automatic Drilling Technology
Iso-Scallop Toolpath Generation for Orthogonal Turn-Milling of Ruled Surfaces
One Effective Solution of Hot Swap Application
Study on Effect upon the Roughness of Bearing Outer Ring from the Jet Pressure in the Strengthening and Polishing Process
Coaxial Adjusting Method for Irregular Rotating Workpiece
Traceability Method for Transmission Quality Problems Based on Contrast Analysis
The Experiments Study of Polishing Characteristics during Polishing Process
Coal Mine Underground Horizontal Extension Transfer Machine
Study on High Speed Machining Strategies for Mold
Application of Pre-Mixed Abrasive Water Jet Technology on Cutting Brazilian Disc
Study on Wafer Thinning Characteristics of Ultimate Diamond Disk
Parameters Optimization and Experimental Analysis in High Speed Machining
Application Research on TorkBuster in Well Yashen 1 of Yumen Oilfield
Research and Application of 9-5/8 Retrievable Casing Drilling Technology
Optimization Method of Man-Machine Operating for Multi-Variety and Small Batch Production
Study of a Electromagnetic Weft Insertion in Textile Machine
Study on the Optimization of Conformal Cooling Channels for Plastic Injection Mold
Optimization of EBW Parameters for 2219 AL-Alloy Using Grey Relation Method
Study on the Wetting Device of GMS-7 Spine Taping Machine
Research Advance on the Drying Section of Paper Machine
Chapter 3: Modeling, Analysis and Simulation of Manufacturing Processes
Modeling and Stability Analysis of SiCp/Al Composites Thin-Walled Workpiece in Rotary Ultrasonic Machining
Micromechanical Modelling of Elliptic Vibration-Assisted Cutting of Unidirectional FRP Composites
Dynamic Simulation on Feedwater Heater of Nuclear Power Plant
Steady-State Load Analysis of a Caterpillar Chassis by Finite Element Method
Safety Inventory under a Periodic Review System
Analysis on Crack Propagation of Roll by the Finite-Element
Modeling of Aircraft Composite Parts Using Simulation
The Simulation and Study of Buffer Device of Hydraulic Cylinder
Numerical Simulation on Diffusion Wear of Diamond Tool in Cutting of Ferrous Metals
Finite Element Analysis on Convexity for Tapered Roller with Arc-Line Modification Profile
5-Axis Virtual Machining Technology Research on Integral Impeller under PROE and Vericut Environment
Delay-Dependent Robust Stability Analysis for Uncertain Nonlinear Systems
An Approach to Determine Clamping Forces and Clamping Sequence of Thin-Walled Workpiece during Milling Process
Application of Error Analysis Method in the Complex Vehicle Model
Temperature Field Simulation of Ballscrew Whirlwind Milling
Study on Engine Characteristic Curves Drawing Method Based on BP Neural Network
A New Method of Complex Logistics Planning Scheduling Based on Super Cubic Path Link Algorithm
Study of the Transmission System of Spreading Powder Device of Direct Metal Sintering Rapid Prototyping Machine
Numerical Simulation and Studies of Temperature Rise within a High-Pressure Vessel during Refueling
Modeling and Simulation of the Hydraulic Height Adjustment System of Mobile Tail Based on AMESim
Simulation Study on CMM Measuring Path Based on the CAD Models of Bevel Gear
Dynamic Simulation on Secondary System of Nuclear Power Plant
A Heuristic Algorithm for Flowshop Scheduling Problem
Numerical Simulation of Gas-Liquid Tow-Phase Flow During Complex Mold Filling Process
The Research of Cognitive Load in the Virtual Maintenance Training
Simulation Study on Heat Transfer Performance of Engine Exhaust Valve
Application of Virtual Prototyping Technology on Kinematical Simulation of Baler Compression Device
The Research on Characteristics of Movement Coupling in Forging Manipulator
Effect of Pin-Fin Heat Sink Structure and Irradiation Angle on High-Power LED Down-Light Thermal Performance
The Research on the Movement Precision of Globoidal Cam Mechanism Based on Error Modeling
The Research on Motion Reliability Simulation of Planar Linkage Mechanism
Research on Model Reconstruction and NC Machining for Blade Based on Reverse Engineering
Design and Kinematics Analysis of a New Two DOF Tilter
Inverse Attitude Solution Model and Numerical Simulation of a 2-DOF Stabilized Platform
The Optimization of Co-Dependent and Absolutely Additive System
The Optimized Iterative Projection Method to Determine the Width of an Arbitrary 3D Object
Study on Security Analysis and Management of Motor Based on Fuzzy Theory
The Multi-Objective Optimization for Cycloidal Gear Drive Based on the Elastohydrodynamic Lubrication Theory
Implementation of Decision Tree for Maintenance Policy Decision Making - A Case Study in Semiconductor Industry
Implementation of Autonomous Maintenance in Semiconductor Industry: A Case Study
Orthodontics Simulation and Finite Element Analysis of Submaxilla Dentition
Analysis of Climbing Obstacle Capability and its Influential Factors of Omni-Directional Wheeled Robot
Fatigue Analysis of MW Wind Turbine Top Flange
Finite Element Analysis of Top Flanged Joint System of High Power Level Wind Turbine
Optimization of Vehicle Handing and Stability Based on RSM
Automobile Box Structure Optimization and Simulation
Analysis of Support Reliability of Missile System Based on Neural Network
Investigation of Fracture Criterion for HTPB Propellant
The Study of Infrared Heating on PET Bottles by Experiment and Adaptive Finite Volume Method
Dexterity Analysis of 6-dof 3-urps Parallel Mechanism
Ant Colony Optimization for Factory Layout
Abrasion Lives Simulation and Prediction of Key Parts for Breech Mechanism Based on Pro/E and ADAMS
3D Finite Element Analysis of Prestressed Cutting
Research on High-Pressure Water Jet Target Object Detection Parameter Optimization
3-D Precise Modeling of Modified Gear Based on Visual Basic
A Method to Calculate Tool Accessible Domain Based on the Point Model for the Multi-Axis CNC Machining
The Research of Energy Saving Improved on Copper Anode in the Hydraulic System Based on AMESim
Research on Support Vehicles Application New Materials of Coal Mine Belt Horizontal Extension by ANSYS Software
Modeling and Enhancement of Mckibben Pneumatic Muscle Actuators
Study on Simulation of the Chain Transmission Mechanism
Investigation of Numerical Stability of Pipe-Flow Simulation under Strong Oscillation of Inlet Velocity
Simulation of Laser-Induced Asymmetric Bubble with Lattice Boltzmann Method
CNC Programming for 2D Image
Modeling Developable Mesh Surface by Lofting
Thermal Analysis of a Ball-Screw System
An Obstacle Avoidance Method Based on Distance Fields in C-Space for Virtual Arm
The Innovative Design and Simulation Analysis of Small Savonius Wind Turbine
Unified Product Information Modeling Using Model-Based Definition Technology
Ladle Transportation Car Frame Finite Element Analysis
Analysis and Simulation of Flow Field in the Ultrasonic Auto Backwash Filter
Research on the Wire Drawing Die Pass Parameter Calculation Based on the Least Square Algorithm
Application Research of Data Warehouse in CRM
The Design of Heart Sounds and Electrocardiogram Monitor System Based Atmega64
Study on Simulation & Evaluation of Radar Network Operation Capability in Complex Electromagnetic Environment
Simulation of Spraying Trajectory Optimization for Helmet
Chapter 4: Material Science and Technology
Sliding Wear Characteristics of High-Performance Plasma Nitrided Bearing Steel
Active Scalable Elastomer Mold to Ease Demolding of High Aspect Ratio Micro Features
A New Method for Measuring the Residual Stresses in Multi-Layered Thin Film Systems
Microstructure and Abrasive-Wear Behavior under High Temperature of Laser Clad Ni-Based WC Ceramic Coating
The Interface Behavior of Micro Overmolding
Impacts on the Particle Size and Shape of Silica Sands by Different Methods of Cooling
Failure Analysis of Axle Sleeve Made from 2Cr13 Steel
The Finite Element Analysis of Flow Field and Temperature Field in the Molten Pool of Surface Treatment by Electron Beam
Atomistic Simulation on the Structure and Lattice Vibrations of Fe7-xCrxC3 Carbides
Study on the Microstructure and Properties of Laser Remelted Ceramic Coatings on Low Carbon Steel Surface
Influence of Sputtering Power on the Structure and Photoelectric Property of Ga Doped ZnO Films
Study on the Abrasive Wear of Chromeplate Piston Ring and Cylinder Jacket Made by Different Materials
Luminescence Properties and Energy Transfer of Sm3+-Eu3+ Co-Doped Gd2(MoO4)3 Red Phosphors
Research on the Elastic Modulus of Single-Walled Carbon Nanotubes
Functions of Step Gating System in the Lost Foam Casting Process
Influence of Smoke on Metallographic Structure of Short Circuited Melted Mark
Constitutive Modeling of the Rate-Dependent Behavior of Ti-6Al-4V Using an Arrhenius-Type Law
The Influence of Different Subbase Materials on the Crack of Cement Stabilized Macadam Base during Construction
An Experimental Study on Lubrication Behavior of Glass Lubricants during Hot Plastic Deformation of Ni-Based Alloys
Experimental Inverstigation on Thermal Expansion Coefficients of SnO2 Thin Film
Test on Electrical Conductinity of Oil Shale
Thermodynamic Analysis of a Brown Glass Containing Fe, C and S
The Responses of Soft Ground Materials Subjected to Dynamic Loading
Preparation and In Vitro Degradation of PLGA/HA Composite Fiber Scaffolds by Electrospinning
Study on the Tensile Testing Method of p-Phenylene Terephthalamid (PPTA) Fibers for Ballistic Protection
Effect of Alloying Elements on the Microstructure and Properties of AZ91D-xCa-ySr
Comparisons of Different Elastomer Micro Molds
Preparation of Ni-Nd2O3 Nanocomposite Coatings by Electrodeposition under Dual-Frequency Ultrasound
Simulational Study on Biaxial Tensile Test of the Envelope Material of Stratospheric Airship
Study on Antireflection of TiO2-SiO2/SiO2 Double-Layer Films Prepared by Sol-Gel Method
Research on the Relationship between the Impact Explosive Temperature and Mass Ratio of PTFE/Al Reactive Material
Summary of Application of Chinese Copper-Clad Aluminum Wire
Synthesis of Bauxite Based -SiAlON by Compound Reduction Nitridation
Study on Corrosion Behavior of Various Steels Used by Ocean Wave Energy Equipment
Microstructure and Creep Resistance of Mg-(8-12 Wt.%) Zn-(2-6 Wt.%) Al Alloys
Finite Element Simulation on Micro-Forging Process Inhibiting Warping of the Thin-Walled Components Treated by Laser Cladding
Preparation and Characterization of Polyacrylonitrile-Based Nanofibers by Electrostatic Spinning
Corrosion Characteristics of 16Mn and Q235B Steel in Natural Seawater
Dynamical Identification Model of Laser Cladding Height in Metal Parts Laser Shaping Process
Tribological Properties and Worn Surface Analysis Generated by Sulfur- and Phosphorus-Free Molybdenum-Containing Water-Based Lubricant
Glass Fiber Functional Warp Sizing
Research on Creep Characteristics of the Double-Base Solid Propellant
Influence of High-Frequency Micro-Forging on Surface Residual Stress of 304 Stainless Steel Sample Fabricated by Laser Prototyping
Study of Oxidation Behavior of Zn and Fe Nanoparticles
Study on Surface Hydrophilicity of Polypropylene Non-Woven Treated by Atmospheric Pressure Plasma
Mechanical Properties and Dynamic Mechanical Behavior for Long Aramid Fiber Reinforced Impact Polypropylene Copolymer
Friction Structure Effect Analysis of Granular Materials in Foundation Soil
Thermal Property Measurement of Polymer Materials
Failure Analysis of Stress Corrosion Crack of 1Cr18Ni9 Stainless Steel Cylinder Body
The Effect of Scanning Velocity on AISI 304 Stainless Steel Laser Cladding Coatings
Porous Metal-Fiber Sintered Felt by Multi-Tooth Cutting and Sintering- Morphological Analysis and Mechanisms
Fretting Wear Behavior of Burnished Pure Copper under Oil Lubrication
Effect of Thermal Treatment on the Physical Properties of Electrospun PVDF Membrane
Alignment of Carbon Nanotubes in Polystyrene Using Vibration and Electric Field
Study on Stress-Strain Model of Metallic Materials with Shot Peening Residual Stress
Effects of Pure Water on the Tribological Properties of Self-Mated Titanium
The Effects of Strong Oxidizing Slurry and Processing Atmosphere on Double-Sided CMP of SiC Wafer
Laser Induced Forward Transfer
Spectral-Domain Optical Coherence Tomography for Material Detection
The Analysis of Fracture Mechanics on Self-Healing Composite Materials with Microcapsules
Nonlinear Viscoelastic Analysis of Double Base Propellant
Chapter 5: Control, Automation and Computer-Aided Systems
Adaptive Control of Magnetic Drive Actuator for Laser Cutting
Magnetic Detector Based on GMI Effect of Amorphous Wire
Analysis of Wireless Energy Transfer System Using Magnetic Resonant Coupling
Receiver Operating Characteristic for Diagnosis of Wine Quality by Bayesian Network Classifiers
Design of a Servo Controller for Modularized Flexible Joint with Integrated Torque Sensors Based on SOPC
A Novel Method for Alignment Calibration of IMU and Doppler Sensors
Model-Free High Order Sliding Controller for Underwater Vehicle with Transient Process
RCS Control Study Based on the Model Reference Adaptive Control
Research of PMSM Rotor Absolute Position Detection System Based on AU6802N1
Adaptive Inverse Control of Hydro Electric Unit Based on Wavelet Neural Networks
PID Control of Main Steam Temperature Used Quantum Particle Swarm Optimization
LMI-Based Robust Control of Norm-Bounded Uncertain Perturbed Discrete Systems with both State and Input Delays
Study on Shift Schedule of Pure Electric Vehicles Automatic Transmission
Low-Dimensional Approximation for Control of Spatio-Temporal Processes Using Principal Interaction Patterns
Research on Key Technologies of the Cableless Pipeline Robot
Passivity-Based Tracking Control Design for Underactuated Mechanical Systems
Error Compensation for Single Pair-Pole Encoder Based on Ellipse Hypothesis
Wireless Remote Control Design of the De-Icing Robot
Research on Data Acquisition System of Ship Measurement and Control Device Check Equipment
The Design of Variable Frequency and Constant Pressure Water Supply System Based on Fuzzy Control
The Optimization Layout Method of Intelligent Roadside Sensor System in Traffic Management and Control
Automatic Calibration of the 3D Vector Magnetometer
Design and Optimization of Elastic Diaphragm in Miniature High-Temperature Pressure Sensor
Automatic Alignment of 3D Point Clouds to Orthographic Images
Propulsion-Force Optimized Control of Linear Induction Motor for Urban Transportation System Considering Material Change of Reaction Plate
A Video Test Sequences Generation Way for Behavior Recognition Based on Cloud Model
A Camera Calibration Method Using Quadratic Curve Fitting
Agile Turn Control for Air-to-Air Missile Based on Reaction Jet Control System
The Research of Automobile Automatic Stabilizer Bar Control System and Test Platform
Design and Implementation of Control System in Ultrasonic Detection Machine for Plate Part
High-Order Distributed Consensus with One-Bit Adaptive Quantization
A Design of Intelligent Illumination System Based on LonWorks
Energy-Saving Applying Study of Fuzzy Control in the Variable Frequency and Constant Pressure Water Supply System
Power Short-Term Load Forecasting Based on QPSO-SVM
Control and Stability Analysis of Multi-Joint Manipulator under Constraints Based on Riemannian Geometry
Study on Improved PCA-SVM Model for Water Demand Prediction
Research on In-Vehicle FlexRay Bus Network Nodes
A New Numerical Control System Based on ARM Microprocessor
A New Way of Ultra-Wideband Channel Estimation Based on Bayesian Compressive Sensing
Design of the Advanced Automatic Door Controller Based on PLC
The Trouble-Shooting for the Over-Current in AC Inverter of Tanker
Switching Control Methods for Expressway Ramp Metering Based on Hybrid Automaton Model
Short-Term Electricity Price Forecasting Based on MPSO-BP Algorithm
The AGV Controller System Design Based on CPAC
Non-Sinusoidal Injection Control Strategy of Z-Source Inverter
USB Flash Disk Recorder Based on STM32
Bringing Path Planning and Lean Automation Together
A Modified Binary Quantum-Behaved Particle Swarm Optimization Algorithm with Bit Crossover Operator
Research on Attitude and Position Tracking Algorithm of Drill Bit for Underwater Mud-Penetrator
Walking Motion Generation and Validation of Biped Humanoid Robot
Study on 3-D Laser-Scanning-Based Machine Vision System for Robotic Construction Vehicles
Photon Counter Implemented by Field Programmable Gate Array
The Simulation of the UAV Collision Avoidance Based on the Artificial Potential Field Method
Design and Research of Energy Saving Control System for Heating Network
Implementation of a Voice Dialing System Based on HTK
Analog Circuit Fault Diagnosis Using AdaBoost with SVM-Based Component Classifiers
A Design of Path Planning System for UP6 Industrial Robot Based on Machine Vision
FBG Intrusion Recognition Algorithm Based on SVM
Analysis for SCR Control System Based on ANN
Pseudo Multi-Hop Distributed Consensus with Adaptive Quantization
Quadruped Robot Omni-Directional Walking on a Slope Based on Static Balance
The Design and Simulation of Voltage and Reactive Power Fuzzy Controller in Substation
Stochastic Admissibility for a Class of Nonlinear Singular Markovian Jump Systems with Time-Delay
Hybrid Neural Network Models of Six-Axis Force Sensor
Mechanical Analysis of the Jumping Motion of a Spherical Robot
Research on Dissolved Oxygen Intelligent Control System in Waste Water Treatment
Application of Fourier Analysis to the Outline of Object
A Sensor of Aero-Engine Real-Time Fault Detection System Based on ARM9
Multi-Sensor Cooperative Tracking Using Distributed Nash Q-Learning
Research on Data Processing Method of Three Dimensional Machine Vision System
Backstepping Adaptive Fuzzy Control for Permanent Magnet Synchronous Motor Servo Systems
Study on Multivariable System Based on PID Neural Network Control
Robust Stabilization of Stochastic Singular Systems with Markovian Switching
Design of Wireless Temperature Measurement System for High Voltage Electrical Equipment
Consensus of Singular Multi-Agent Systems with Continuous-Time Dynamics
Study on the Addressing Mode of Assembly Language Instruction Set of 80C51 MCU
The Steam Generator Water Level System Based on Nonlinear First Order ADRC Control
Sliding Mode Control of Pendulum-Driven Spherical Robots
Research on the Wi-Fi Protocol Intelligent Automatic Meter Reading System
Data Acquisition Design Based on the STM32
LADRC Control for the Three-Phase Voltage-Type PWM Rectifier
Design of the Controller for PCMC Forward Converters
Study on Comprehensive Performance Testing Table and Intelligent Measuring Technology of Constant Velocity Universal Joint Assembly
Dynamic Modeling of Industrial Robot Based on Support Vector Machine Regression Algorithm
A S-Shape Curve Speed Control Algorithm of Continuous Micro-Lines Interpolation Based on Adjustable Feed-Speed
Stabilization Analysis of Switched Affine System Applied to Dc-Dc Converters
Pre-Estimating Dynamically the Optimum of Extremum Value Control System with Large Time Delay Element Based on Correlation Identification
Optimal Control of a Nuclear Reactor in Load Follow Based on LQG/LTR
Wiener Filter Based on the Image to Blur
Radiation Resistance Experiments of Image Sensor and Acoustic Sensor
Pseudo Two-Hop Distributed Consensus Algorithm with Link Failure
Design of Grid Connected Parallel Inverters with Interleaved Phase Shift by Using CAN Bus
Design on Parameters of Power Circuit of AC Servo System
Joint Combat System of Systems Modeling and Effectiveness Analysis Based on Complex Networks
The Direct Kinematics Solution of the 6-RSPS Simulator Platform with BP Networks
Pseudo Two-Hop Distributed Consensus Algorithm under Directed Topologies
The Analysis of Wire Rope Tension Sensor Elastic Body Based on Solidworks
Based on the Point Cloud Data of Columnar Structures to Tilt Analysis
The Switch Control of Double-Power Supply System Based on Intelligent Static Switch
Flocking Control under Virtual Leader-Follower with Link Failure
Second-Order Consensus Filtering Algorithm
The Summary of AGV Guidance Technology
The Research and Design of Liquid Level Control System Based on Computer Nerve Network
The Drawing Simulation for Configuration of the Articulated Industrial Robot Based on UG
A Simple Data Acquisition Software for Serial Devices Based on Excel VBA and its Application in Rotary Kilns
Simulation Research on the Control Performance of CVT Starting-Clutch
Direct Torque Control of Brushless DC Motor
Feedback Linearization Control of Pmssm Based on Svpwm
Application of TMS320LF2407A and CAN Bus Technology in Flow Control of Inverter
Based on Single Chip Microcomputer Heating Temperature Automatic Control System
An Intelligent Bullet Counter Based on UV Electro-Optical Technology
Position Tracking Control for Water Hydraulic Vane Actuator
The Application of Kano Map in the Design of Relay Logic Control Circuits
Study on Navigation of Wireless Sensor Network Mobile Robot
Application of Zero-Vector Control to Three-Phase Inverter
Design of Human-Simulation Intelligent PID Based on APMP Refiner Control
The Optimization of Mechanical and Electrical Integration Linear Output Transmission System with Sensor Function
The Application of RAM Analysis in a CNC System
Test Analysis of a Six-Wheel Hydraulic Active Suspension Control System
Research on the Application of the Electro-Hydraulic Digital Valve Control in the Lifting Device
Study of the Engineering Vehicles of Automatic Transmission Shift Schedule Based on Fuzzy Neural Network
A Study on Servo System of Radar Tracking Fast Targets
Development of Automatic Tracking Plasma Spray Welding System of Triple Eccentric Butterfly Valve
Numerical Simulation of Pulsating Flow over Blood Vessel Robot
The Decision-Making for Fault Diagnosis Based on Consistent Approximation Space
The Design of Jet Vane of Thrust Vector Control System
A New Control Method of Active Absorption Wave-Maker
Research on Thermal Tactile Perception of Human Fingertips Using Temperature Control Device
Application of PDA Industry Data Acquisition System in Analysis of the Reason of Strip Blocked in Hot Mill
Toyota Prius Control Strategy Experiment Analysis
A Method of Constructing Electric Power Data Warehouse Based on Cloud Computing
Vehicle Active Chassis Integrated Control Based on Multi-Model Intelligent Hierarchical Control
A Novel Three-Phase AC/AC Converter Using Six Switches
Chapter 6: Navigation Systems, Monitoring and Detection Technology
Process Monitoring and Fault Diagnosis of Penicillin Fermentation Based on Improved MICA
Design Scheme of Outside Environmental Monitoring System for Coal Mine Mobile Refuge Chamber
Comparison on Three Filter Methods in Self-Alignment for SINS of the Carrier Craft
Novel Label-Free Cells Structure Detection Method Study Based on Mie Scattering Principle
Initial Alignment on Moving Base for GPS/INS Integration with the Effect of Time Asynchronous
Road Edges Detection of a Novel Travel Aid for Visual Impaired People
The Application of Coal Cleaning Detection System Based on Matlab Image Processing
A Ship GPS/DR Integrated Navigation System
Image Edge Detection Based on Multi-Structure Elements and Nonsubsambled Contourlet Transform
Research on Independent Coarse Alignment of Aircraft Carriers SINS
Study on Investigation of Underground Metal Object with Transient Pulse Electromagnetic Method
WI-FI in Mine Ventilation Monitoring System
Hydraulic Focusing Stability Detection Method Study Based on Digital Image Processing Technology
Study on High-Grade CNC Machine Tool Wear Monitoring Methods and Experimental System
Development of Signal Conditioning Circuit of a New Strain-Crack Detecting System
Study on Multi-Parameter Monitoring Instrument Based on GSM Network
Research on Substation Transformer Monitoring System with GSM Network
Application in Deformation Monitoring Signal Based on Wavelet Modular Maximum Algorithm
Design and System Realization of Real-Time Monitoring of High Voltage Lines
Development of Quantitative Analytical Instrument for Colloidal Gold Strips
Chapter 7: Dynamics of Mechanisms and Systems
3D Solid Finite Element Modeling and Rotordynamics of Large Rotating Machines: Application to an Industrial Turbo Engine
The Spectral Leakage Minimization of Spectrum for Motor Fault Analysis Using Adaptive Multi-Taper Method
Optimal Design of Vehicle Power-Train Mounting System Based on Improved Particle Swarm Optimization
Software Development for Testing and Evaluating Online Dynamic Performance of CNC Machine Tool
FLUENT/SIMULINK Collaborative Simulation for Missile Separation from Cavity
A Method for Sheath Flow Forming, Controlling and Detecting
Adaptation of Gershgorin Disk for Motor Fault Analysis
Simulation Study of Vehicle Brake Stability Control on Turning Lane Based on ABS
The Relationship between Contact Angle Difference and Equivalent Conicity of High-Speed EMU
The Noise Test System and Solution Measures of Vibration Test
Vibration Analysis of a Shell Structure by Finite Element Method
Dynamic Responses of Supercavitating Vehicles under Non-Stationary Random Excitation
Research on Prognostics and Health Management System for Self-Propelled Gun
Numerical Computation of Acoustic Field Using Boundary Mesh Less Method
Numerical Calculation of Hydrodynamic Interference Coefficients between Hull, Rudder and Propeller
Dynamic Parameters Estimation Based on Set Inversion and Interval Analysis Algorithm
Fault Detection of Electric Motors Application Using ML Estimation Method
Simulation Analysis of Control Strategy for TLT Wheel Coordination Based on Constant Pressure Network
Comparison of Two Two-Equation Turbulence Model Used for the Numerical Simulation of Underwater Ammunition Fuze Turbine Flow Field
Research on Operation Stability Deterioration Trend Prediction Faced to Wind Power Group
The Effects of Ply Angle of Laminated Composite Plates on Wind Induced Vibration
Application of Support Vector Machine Regression in Failure Analysis of Fan Pump in Amphibious Assault Vehicles
Fault Diagnosis of Induction Motor Based on Wavelet Packet Analysis and Negative Selection Algorithm
Research on Similarities between Abnormal Rotor Model and the Prototype Based on Dynamic Similarity
Analysis and Training in Sanda Movement Rotor Inertia Biological Mechanics
The Transient Characteristerics Evaluation of Dynamic Environmental Test of Satellite
Experimental Study on Deck-Temperature-Rising Technology in Different Deck Area
Research on Balancing Method for Inertia Force of Slider-Crank Mechanism with Small Linkage Ratio
Analysis and Control of Vibration Generated by High-Speed Spindle System
Improved EEMD on the Application Research of Signal Trend Analysis
Studies on Dynamic Parameters of Intellectual Vibratory Roller
The Finite Element Simulation of Crack Growth of a Wind Turbine Blade
Dynamics Response of Rails for Electromagnetic Launcher with Acceleration Load
Vibration Analysis of Pumps Units Based on Fuzzy Matter-Element
Study on Fault Diagnosis of Rotating Machinery Based on Lyapunov Dimension and Exponent Energy Spectrum
Study of Data Fusion Method for Fault Diagnosis Based on FDR Feature Selection Algorithm and HMM/SVM Model
The Effect of Tension for Belt Drive Rotary Motion Error
The Progress of the Study on Fan Noise Reduction Technology
The Systematic Thinking of Traffic Accident Vehicle Brake Performance by Road Test Verification
Verification of FLUENT in the Computation of Supersonic Inlet
Numerical Analysis on the Pressure Distribution of Long Oblate Chimney
Application of EMD to Integrated Signal Trend Extraction
Research on the Equipment-Oriented Faults Diagnosis Expert System
Analyses of Error and Precision of 6-DOF Platform
Analysis of Turbines Vibration and Treatment Measures during the Commissioning
A Brief Analysis of Vibration on the Printing Area in Ordinary Offset Press
Blasting Demolition Technology and Vibration Monitoring of Two 90m-High Cooling Towers in Complex Environment
Modal Analysis on Transmission Gear Train of Planetary Reducer
Noise and Vibration Analysis of the Precision Grinder Hydraulic Station
Model for Unanticipated Fault Detection by OCPCA
A Systematic Research on Reconstructing the Accident Velocity with Braking Traces
Fault Diagnosis of Rotating Machineries and its Development Trend
An Identification Method of Appearances and Expansion of Fatigue Crack in the Wind Turbine Blade Based on Fractal Feature
Wavelet Selection in Fault Diagnosis of Wavelet Transform
Development of Automatic Stimulating Cell System Using Mechanical Vertical Force
A Study of Hybrid Optimization of Injection Moulding Process Parameters for Plastic Gear
Application of Non-Circular Planetary Gear Mechanism in the Gear Pump
Study on the Effect of Brush Roller to Blanket
Electro-Hydraulic Proportional Flow Valve Control Complex Variable Pump and Research its Property for Injection Machine Hydraulic System
The Method on Acceleration Extraction from Strapdown Airborne Scalar Gravimeter Based on Flight Dynamics
Inquiry Process of a New Transmission Mechanism
Analysis of Bulging Application in the Wind Power Bearing Ring Production
On the Kinematics and Statics of Planetary Simple Gear Reducers
Chapter 8: Engineering Education
The Construction and Practice of Teaching Method for Mechanical Principles Integration Course Based on CDIO
Integrated Model of the TRIZ Theory and Research-Oriented Teaching
Group Decision-Making Oriented Civil Engineering Undergraduate Education Reform in China
College Teaching Quality Evaluation Model Based on BP Neural Network
Thinking of Engineering Graphics Teaching Management Model and Teacher Team Building
Strengthen Practice Reform of Professional Teaching and Cultivate Students' Project Practice Ability
The "Nexus" Teaching Method in Mechanical Engineering Courses
Exploration and Practice of "Six in One" Ability Cultivation System of Independent College Students
Exploration on Teaching Reform and Innovation of Material Mechanics
Exploration and Consideration on the Curriculum Construction of Processing Technology of Paper Box and Carton
Teaching Reform of Numerical Control Machine Tools and Programming Based on Modern Engineering Education
The Internet-Based Electrical Engineering Virtual Lab: Using Load-Balancing Cluster System
PCMM Model Analysis and Development Capability Fuzzy Evaluation System Research in Teaching Team of Automobile Specialty in Higher Vocational College
The Research and Practice of Innovative Training Methods on Computer and Related Majors
Integrating and Sharing of Instructional Resources for Local Colleges Based on Cloud Computing
Study on Problems and Strategies of Personnel Training in Modern Logistics
Reflections on the Training of Outstanding Engineers
The Teaching Design for Mechanics-Electronics- Hydraulics Integrated Experiment Based on Learning Psychology
Conception of Mechanical Engineering Training System by Trinity of Engineering Project, Workplace Environment and Industry-University Cooperation
Thinking and Suggestions on Engineering Mechanics Teaching Based on "Education and Training Program of Excellent Engineer"
A Study on the Teaching of Basic Specialized Courses Based on the Cultivation of Practical Engineering Capabilities
Extending Mechatronic Innovative and Practical Training Curriculum to Sophomore Undergraduates
Research into the Training of College Students' Abilities to Create, Innovate and Pioneer
Research and Practice of Steady Enhancement on Innovation Ability of Mechanical Engineering Students
The Exploration and Practice of Applied Talents Cultivation Based on "Engineering with a Big E."
Quality Evaluation of Specialty Employment for Engineering Education
The Research of Engineering Quality Cultivation Strategy in Engineering Education
The Tao: What Engineering Education Should Concern - Teachings from Tao Te Ching
The Research and Practice of Three-Dimensional Innovation Talents Development Model in Engineering Education
Using WebQuest Approach in EFL for Project-Based Course Design
Training Mode of Agricultural Engineering Talents Based on Industry
Innovating the Educational Mode of Multi-Level Cooperation, Cultivating Personalized Mechanical Engineers
Research on Training Mode of Higher Engineering Education
Construction of Mechatronics Engineering Talents Cultivation System Based on Local Economy
Research into College Students' Pioneering Education
Development of the Practice Teaching Project in Machine Design Based on CDIO Engineering Education Model
Current Situation of Applied Graduation Design and Countermeasures
Study on Solving Ways of the Problems in University Course Syllabus
Exploration on Experiment Teaching Reform Based on CDIO Engineering Theory
Researches and Practices of "Interchangeability and Technology Measurement" Based on the Training Pattern of Excellence Program
Study on China's Engineering Education Reform
The Application of E-Portfolios in Designing Alternative Assessment System for Foreign Language Education
Teaching Reform Research of Mechanical Drawing Based on the Theory of CDIO
Strengthen the Training of Metalworking Practice for Promoting Excellent Ability
Research on Accreditation System of Higher Engineering Education
Innovation on "Machinery and Equipment" Classroom Teaching for the Cultivation of Excellent Engineers
Building a New Training Model of Practice Teaching Based on "Plan for Educating and Training Outstanding Engineers"
Study on Strategy-Based Total Budget Management System of Private Higher Learning Institution in China
Implementing Collaborative Innovation Accelerating Multi-Cooperation for Vocational Colleges
Research on Design Knowledge Acquisition of Manipulator Based on Adaptive Genetic Algorithm
Employment Situation Investigation of Graduates Major in Mechanics
Learning Foremost Knowledge of Fluid Mechanics with Multiple Representations
Chapter 9: Related Themes
Experimental Analysis of Polymer Injection Ability under Constant Pressure and Speed
A Rapid Maneuver Method with High Accuracy for Spacecraft Based on CMG and RW
Study of the Modeling of Incentive Air Pressure Waves to the Human Ear
Contour Extraction of Inclusion Image with Mumford-Shah Model
Wall Socket Fire Analysis
Influencing Factors for NOx Reduction by SCR
The Chloride Ion Penetration Model Coupled with Temperature and Moisture Transfer in Marine Environment
Exponential Asymptotic Stability of a Repairable System with Two Identical Components
Analysis of Low-Carbon Economic Benefits of Wind Power Projects in Yunnan Province
Discussion about the Efficient Management and Control of Construction Projects' Cost
Diagnostic Strategy Optimization Based on Predatory Search Algorithm
Safe Comprehensive Evaluation of Fully Mechanized Mining Face Based on Fuzzy Matter-Element
Relationship Study of Absorption Capacity, Degree of Innovation and Innovative Performance in Textile and Garment Enterprises
Semantic Based Intelligent Resource Service Composition Technology
Research on the Dangerous Quality of Roasting Lighter for Electric Heater
Constitutive Model Based on the Multiplicative Decomposition of Deformation Gradient in Arbitrary Orthogonal Coordinate System
Research on Planning of Logistics System in the Material Support Base for Emergency
Artificial Bee Colony Algorithm for the Parallel Test Tasks Scheduling
Research on Decision-Making Method for Suppression of Air Defenses of Virtual Target for the Radar Simulator
Image Conversion from DICOM into Bitmap Based on VC Platform
The Improvement of Wavelet Packet for Psychoacoustic Model
Accurate DOD Measurement Using Ranging Tone of China CE'2
Simplification of the Parametric Transformation Equations for Analysis of Plane Stress
User-Group Requirements Based Approach for the Standardization of Parts
Using Parameter Joint Model to Predict the Grain Yield of Guangxi Province
Dynamic Behavior on Emergency Landing of Light Aircraft with Occupant Restraint System
Research on the Selection of Modes of Recycling End-of-Life Appliances Based on AHP
Testing Technology of Subsea Christmas Tree
Study on the Relation of the Furniture Product Form and Modeling Elements
Research of Modular Experimental Production System
Application of IRP Technology in the Informatization Construction of Vehicle Maintenance Support
Double-Layer Fuzzy Synthetic Evaluation Model of the Colour Comfort Degree in Industrial Circumstance
Study on Correlation between the Starch Content of Potato Tuber and its Viscoelastic Characteristics
The Error Analysis of Water Cut of Crude Oil
The Research of Remaining Oil Distribution in High Water Cut Oilfield
The Convergence Rate with Bootstrap for Multidimensional Density Functional Kernel Estimation
Digital Watermarking Based on Two-Way Arnold Transform and QR Code
Technical Factors' Measurement and Simulation in the Equipment's Stability Investigation
Development Trend of Car Painting Technology
The Research of Factors which Effect B2C E-Commerce Trust - Based on the Mechanism of Process
Study on the ESC Steady-State Cycle Experiments of SCR System for Reducing NOx Emissions
Application in Testing of Bullet Ballistic Parameters Based on Linear Charge Coupled Device
Roundness Error Measurement of Shaft Parts Based on Virtual Instrument
Ontology-Based Semantic Description for Substation Devices
Stochastic Optimal Dispatch Model Considering Security Risk Constraint
Influence of Magnetic Field on Aqueous NaCl Solutions: A Foundational Research on the Desalination Method Based on the Rotating Electromagnetic Effect
Research on Evaluation of Leather Handle Property Based on PNN Neural Network
Power System Stochastic Economic Dispatch Considering Uncertain Discharge Capacity from V2G
Experimental Improvements of Accident Investigation Report
Coupled Shape and Reentry Trajectory Optimization of Entry Vehicle for Lunar Return
Self-Organization System Framework of Enterprise Information System Based on CAS
Self-Reduction Quiescent Current Low Power Low Dropout Regulator for SoC Application
Study on Method of Key Target Tracking Parameter Matching
A Design of Cascaded Multilevel Inverter Snubber Circuit
Study on Developing Data Depot for the Equipment Support
Research on Feature Selection Based on Improved Particle Swarm Optimization
Three-Dimensional Elastic Solution of a Transversely Isotropic Functionally Graded Rectangular Plate
by "Nielsen BookData"
