Advanced designs and researches for manufacturing : selected, peer reviewed papers from the 2nd International Conference on Materials and Products Manufacturing Technology (ICMPMT 2012), September 22-23, 2012, Guangzhou, China

Author(s)

• International Conference on Materials and Products Manufacturing Technology
• Wang, Pengcheng
• Liu, Xiangdong
• Han, Yongquan

Bibliographic Information

Advanced designs and researches for manufacturing : selected, peer reviewed papers from the 2nd International Conference on Materials and Products Manufacturing Technology (ICMPMT 2012), September 22-23, 2012, Guangzhou, China

edited by Pengcheng Wang, Xiangdong Liu and Yongquan Han

（Advanced materials research, v. 605-607）

Trans Tech Publications, c2013

• : [set]
• Part 1
• Part 2
• Part 3

Note

Includes bibliographical references and indexes

Description and Table of Contents

Description

Volume is indexed by Thomson Reuters CPCI-S (WoS). The studies presented here cover the topics of product design, manufacturing and analysis, management and production scheduling, supply chains, CAD/CAM/CAE, reliability, fault diagnostics and quality monitoring, measurement techniques, technologies and equipment, dynamic analysis of mechanical systems and mechanical transmissions, fluid power transmission and control, mechatronics, industrial robotics, control technologies and intelligent systems, electronic and microelectronic technology, embedded systems, signal and intelligent information processing, software and computers in research and engineering solutions.

Table of Contents

Preface and Conference Organization Chapter 1: Product Design, Manufacturing and Analysis The Optimization Design of Overhead Traveling Crane's Box Girder Requirement Forecasting of Equipment's Maintenance Spares-Parts Based on Exponential Smoothing Method The Combined-Matching Design of the Tower Body of Tower Crane To Analyze The Influence Factors on Energy Saving of Hybrid Bus Optimization Design of Shading Shed Transmittance in Highway Tunnel Entrance Application Study of the Virtual Tactile Design in Product Design Optimization Design of Stack Package Warpage Based on Moldflow Software A Parametric Study of the General Profile for Hydrodynamic Journal Bearings The Exploration of Recycling Design of Furniture Products Based on Structure Application of Improved Genetic Algorithm to Traffic Equipment's Rush-Repair in the Wartime Application of Fractal Graphics in Fashion Design Design of the Process and Equipment of Melt PEK Filter Optimization Design Research on Manual Piston Pump The Assembly Design of Non-Ball Mills Static Analysis of Stator Housing of Screw Drilling Rig Design of Non-Ball Mill Based on the Green Conception Thermal Design and Simulation for Lithium-Ion Power Battery Pack Assembly Preliminary Perform of PDM Technology in Automotive Design Research on Storage Life of Electronic Equipment Based on Goodness of Fit Test Method Optimizing Design of New Kind Acoustic Horns for Ultrasonic Machining Based on Finite-Element Method Research of a Variety of Fuel Injection Timing Control Experiment Station for Automotive Engine Virtual Shaping Design of Electrically Driven Hunting Cart Application of Advanced Materials in Sports Engineering A New Design Approach for PSS Conceptual Development The Analysis of the Fly Shear Head Motion Track Innovative Design of Portable Public Transport System for University Students Appearance Design Research of Home Sealing Machine for Bagged Food The Gate of General Top-Open Freight Train Security Investigation The Application of Gray Clustering and Information Axiom Integrated in the Scheme Evaluation of Mechanical Products Application of Accuracy Engraving Technique in the Complex Curved Surface Mould Processing Collaborative Optimization on Structural Parameters of Scroll Compressor Single Inlet Pressure Swirl Nozzle Stationary Wave Pattern and Quality Optimization Application Boundary Element Method to Compute the Potential of the Eight-Needle Electrodes Thermal Layout Optimization of Stacked Chip Based on Ant Colony Algorithm Developing Size Specifications of 3D Body Models for Males Aged between 7 and 18 Assembly Line Balancing the Comparison of COMSOAL and MSNSH Technique in Motorcycle Manufacturing Company A Novel Roller Chain Sleeve Crevice Identification and Orientation Device Design and Test Study of Wheat Straw Weaving Process and Decorative Effect The Analysis on Motion in Quiescence of Packaging Container Molding Robust Design of an Ultra-Thin Centrifugal Fan on Fuzzy-Based Taguchi Method Research on Key Technologies in the Field of Wood Saving and Substitution in Packaging of Electromechanical Products Inverter Based on Improved Z-Source Structure for Off-Grid Type Wind Power Generation Structure Design and Modeling for a Picking Bananas Manipulator Reinforced Techniques Analysis of Goaf-Side Entry at Isolated Island Coal Face Based on FLAC Numerical Simulation Design of the Spring Fixture for Aging Treatment A Framework for Life Cycle Cost Estimation of a Product Family at the Early Stage of Product Development Design of a Type of Semi-Automation Stretcher-Vehicle Marine Oil Spill Emergency Response Research Design and Kinematic Analysis of a New Grapple Mechanism Classification of Men's Shoulder Shapes Based on Pyramid Method Extraction of Design Factors of Product Family Based on Customer Needs Strength Finite Element Analysis and Test Research of Steel Package Rotation Table Beam and Tumbler Fuzzy Information Axiom in Conceptual Design Scheme Evaluation of Handling Equipments Test Research on the New Electromechanical Axial-Flow Pump with Advantages of Small Vibration and Noise Innovation Design Method of Product Base on Materials Innovation Technologies Study On the Design Methods of Fast Moving Consumer Goods Intelligent Design of Mechanical Products Based on Function-Knowledge-Structure Development of Parts Family Manage System Based on PDM in Large-Scale Air Separation Equipment An Efficient Torlerance Robust Design Method Based on Taguchi Theory Research on Electric Power Equipment Preventive Maintenance Cycle on the Basis of Economic Life Cycle Costing T91 High Temperature Reheater Piping Leakage Analysis Accessories' Matching Design Study and Development Evaluation Model of Aircraft Maintenance Mode Based on Improved AHP Design and Realization of Hand-Held Smart Electrothermal Umbrella Applied New Materials Research on Individualized Requirement Modeling Oriented to the Dynamic Synchronization The Research and Application of Seeding Machine's Dislocation Type Seeding Device Design of a Kind of Drilling Machine for Semicircle Shaft Stability Analysis of Pumper and Finite Element Analysis of Ladder Structure for a Scaling Ladder Pumper A Novel Approach to Evaluate the Stability of Production Manufacturing System Based on Petri-Net and Analytic Hierarchy Process Research and Design of a Novel Mobile Police Station Design and Simulation of Visual Miniature Loop Heat Pipe Improvements in Manufacturing Processes in a Graphical Analysis as Result of Kaizen Events A Comparison Study of Small Displacement Torsor and Analysis Line Methods for Functional Tolerance Analysis Ontology-Based Knowledge Representation for Mechanical Products The Conceptual Design of Table Jaw Based on Functional Principle Design The Tolerance Optimization Design of Displacement Pump Customer Evaluation and Selection Method of Real-Time Innovative Design Based on the Network Study of Regenerative Braking Model and Simulation of a Car DFSS of a Diagonal Impeller A Fast Point-Sampled Model Denoising Algorithm for Product Design The Finite Element Analysis on the Crossbeam of Full Automatic Hydraulic Tile Press Optimization of Micro Wind Turbine for Dental Fiber Handpiece Based on the Taguchi Method Stress Analysis of the Adhesive Used in a Hard Disk Drive Bearing Assembly Using Finite Element Model Innovative Design of Hydraulic Driving Drum for Belt Transfer Machine Study on the Novel Spinning Technology of Broken Silk Fancy Yarn An Investigation on Development of Seat Cooling Fan for Vehicle Design and Research on Wind-Solar-Diesel Hybrid Generating System at High Altitude A New Cast Stone Roller Kiln and its Combustion Control Approach High-Efficiency Solar Power Supply Design Simulation Research about Web Press Paper Tape the Second Time Tension Control Based on MATLAB Research on Ride Comfort of Nonlinear Vehicle Suspension Collaborative Design Optimization of Main Movement System of Hydraulic Piston Engine Study on Torque Converter with Adjustable Guide Vanes of Hydrodynamic Speed-Adjusting Wind Turbines Analyzing on the Principles of Intelligent Furniture Design Analysis of Fabric Reconstruction Problem in the Apparel Production Design and Manufacture Pilot Investigation on the Driving Posture Comfort among Malaysian Drivers Product Style Map - An Effective Tool for Product Strategy Planning Chapter 2: Management and Production Scheduling Research on Exhibition Logistics Information System Designing The Intelligent Forecasting Method of Mine Equipment Maintenance Plan Flexible Job-Shop Scheduling Problem under Uncertainty Based on QPSO Algorithm Information on Risks and Prevention of the Supply Chain in E-Commerce Environment The Architecture for Solving the Cross-Domain Keywords During New Product Development Spare Parts Production Planning Model Based on Fuzzy Programming Value Chain Theory and its Application in Steel Enterprises Business Process Management for Information System Implementation in Discrete Manufacturing Workshops Based on Multi-Agent Simulation Research on Confidence Degree of Enterprise Alliance under the Environment of Network-Based Manufacturing Scheduling to a Common Due Date on Unrelated Parallel-Machine with Deteriorating Jobs The Research of Heuristic Algorithm for Flow Shop Scheduling Problem Research on the Application of Operation Characteristic Curve in the Sampling Inspection for Foods in Prepackages with Fixed Content Study on Coal Lean Mining Theory and Practice A Multi-Issue Negotiation Based Task Allocation in Virtual Enterprise Chapter 3: Supply Chain Introduction of IOT Technology in a Logistic System for High-End Wine Sales Study on Supply Chain Performance Evaluation Method of Equipment Spare Parts Optimization of Port Supply Chain Super Network under Electronic Commerce Study on Chinese Container Associates and its Construction Strategy Energy-Saving Technologies of WSN Study of Container Transport Planning Model and Algorithm Modeling and Optimization of Traceability System for Agriculture Products Supply Chain Design of Manufacturing Logistics Service Platform in a Certain Area Chapter 4: CAD/CAM/CAE To Solve Mechanical Working Space by Applying Graphic Integration in ADAMS A Rapid Design System for the Transmission System of Mounter Worktable Based on Second Development of SolidWorks Model and Finite Element Analysis of a Bus Body Optimization Design of a Bus Body Frame Modeling Method and Application in Digital Mockup System towards Mechanical Product The Application of AutoCAD Software in Forestry A New Way of Virtual Prototype Design and Analysis for Tractor Steering System Offshore Platform Deck Crane Fatigue Analysis Based on Abaqus Simulation of Crank-Rocker Mechanism on Finite Element by ANSYS Characteristic Study on Temperature Field of Hydrostatic Bearing of Hydroforming Machine Study on the Design Method of Testing Fixture for Bent Tube Based on UG Parameterized Modeling of Circumferential MEFP Warhead Based on Characteristics Research on the Virtual Assembly-Disassembly and Repair of the Automobile Drive Axle 3D Modeling and Motion Simulation of Single Surface Corrugated Machine Based on SolidWorks ANSYS Application in Modal Analysis of Bus Body Frame Calculation of Tilting Torque for Converter Based on Solidworks A Single-Phase Electric Harmonic Monitoring System Design Based on the LabVIEW Optimization and Application of STL Model Slicing Algorithm in Rapid Prototyping Motorcycle Modeling with SimMechanics System Dynamic Characteristic Simulation of Spacecraft Propulsion System Based on AMESim Study on Parametric Assembly Modeling of Standard Parts with Assembly Level of Mold Based on UG Secondary Development ANSYS-Based Finite Element of Rear Frame in Underground Transport Vehicle Chapter 5: Reliability, Fault Diagnostics and Quality Monitoring The Common Mode Failure Analysis Based on Markov Model Research on Intelligence Inspections of Gear Profile Deviation Research on Reliability Qualification Test of Mechanical and Electric Equipment Onboard Research on Fault Diagnosis for Bearing of CNC Machine Tools Multiple Reference Impact Testing for Bridge Assessment with Drop Hammer An Independent Component Analysis Based Defect Detection for the OLED Display Fault Diagnosis of Valve Train of Internal Combustion Engine Based on the Artificial Neural Network and Support Vector Machine A Note on the Early Failure Period for CNC Machining Tools High Order Spectrum Characteristics of the Elevator Fault Field Test of Wellbore Anti-Collision Monitoring System The PHM Research of Vessels Equipment Based on Condition Large Pendulum Shaft Failure Analysis and Countermeasure Research Electromagnetic Nondestructive Testing in Cracked Defects of Oil-Gas Casing Based on Ant Colony Neural Network The Research and Analysis on Valve Reliability of Reciprocating Compressor The Reliability Estimation of Double-Parameter Exponential Distribution on Zero-Failure Data Application of Measurement System Analysis in Controlling the Gun Maintenance Quality Research on Parameter Distribution of Interval Deleted Data with Turnbull Estimation Stress Analysis of Ultra-Supercritical and Electrical Three-Way Valve Body Intensity in a High Pressure Heater Using FEM Credibility Measure and Assessment Method of Equipment Severity to Voltage Sag Discussion about Circuit Board Fault Diagnosis Based on D Algorithm Research on Fault Diagnosis Based on TEAMS Mechanism Movement Reliability Analysis of Galting Gun Sensitive Equipment Failure Assessment Caused by Voltage Sags Using Interval Probability Tooth Surface Contact Fatigue Reliability Analysis of Cycloidal Gear Based on Monte-Carlo Fault Location for Transmission Line with Shunt Reactors Impacts of Protection Cooperation on Voltage Sag Frequency and Sensitive Equipment Trips Fracture Reason Analysis for Helical Gear Shaft of Converter Tilting Mechanism Senior Reducer Fault Diagnosis System of the Fire Control System Based on Fuzzy Neural Network The Fatigue Life Research on the Crossbeam of Automatic Hydraulic Tile Press The Fault Diagnosis Model of FMS Workflow Based on Adaptive Weighted Fuzzy Petri Net Safety Analysis and Design of Wireless Monitoring System Chapter 6: Measurement Techniques, Technologies and Equipment Recognition of Branch Insulation Parameters in Coal Mine Distribution Network using Least Squares Method Application of Sliding Window-Genetic Programming Algorithm in Alert and Forecast for Mine Safety Monitoring Camera Calibration of Binocular Vision Based on Virtual 1D Target The Electronic Measuring System Design of Identifying Freshwater Fish Meat with Different Freshness Chapter 6: Measurement Techniques, Technologies and Equipment A Low Frequency and High-Precision Microbarograph Monitoring System Research on Key Technologies of the Needle Loom Condition Monitoring System Determination of Multi-Element in Egg of Poyang Lake Anas platyrhynchos by ICP-AES Method of Disease Diagnosing Based on SVM and Rough Set The Design of Pressure Meter Based on Ultralow-Power Consumption Technique Road Load Spectrum Collection and Analysis of AMT Actuating Mechanism Research on the Computational Algorithms for Layer Wound Linear Variable Differential Transformers Classification of Floral Origins of Honey by NIR and Chemometrics Modeling and Simulation of the Dissolved Oxygen Monitoring System in Aquaculture Researches on the Size Measurement of Mechanical Parts Based on Image Processing Feature Extraction of Leaf Images for Mite Disease in Cotton Fields Research of Ultrasonic Flow Detection Method Based on Hydrodynamics Analysis Research on Non-Invasive Measurement of Optical Parameters of the Tissues by Support Vector Machine Determination of Trimethylamine in Air by Cataluminescence-Based Gas Sensor Monitoring and Research of Power Ultrasonic Honing Vibration Frequency Granary Temperature and Humidity Detection System Based on MCU Flow Rate Measurement Method and Apparatus of Thick Pastes Principle Error Analysis of Three-Point Supporting Type Barycenter Measurement System Design of Data Acquisition and Storage System for Digital and Analog Signal Based on FPGA Study on the Attenuation Behavior of Acoustic Wave in ER Fluid An Measuring and Evaluation Method of Coaxiality Error for Large-Scale Holes Vehicle Braking Efficiency On-Line Monitoring and Evaluation with MFDD FEM Study on the Dynamic Effects of CMM Geometric Errors Design of Measurement System for Solid Propellant Kneading Machine's Pot Temperature Sizing System for Automatic Construction of Dress Shirt Patterns for Men Structural Damage Detection of the Simple Beam Based on Responses Phase Space Wheat Sedimentation Value Determination Based on Near Infrared Spectroscopy Automatic Identification of Crack in Ultrasonic Infrared Imaging The Curing Residual Strain Monitored by Fiber Bragg Grating Sensors The Design and Implementation of the Terminal in a Vehicle Exhaust Real Time Detecting System A Test of Mtem' Application in the Iron Mine ahead to Explore the Water Research on the Utilization of Smart Meters' Information under the Background of Smart Grid A Sinusoidal Grating Design and Performance Analysis Method of Dynamic Detection for Clutch of Real Vehicle Based on RFID Technology Research on Aerocraft Attitude Testing Technology Based on the BP ANN Research and Application of Portable Real Protection Potential Measurement System of Buried Steel Pipeline Application Research on Aqua-Sim for Underwater Acoustic Sensor Networks The Insights of Node Deployment for Localization Accuracy in Underwater Acoustic Sensor Networks Application of Self-Calibration in Flatness Assessment Determination of Residual Organic Solvents in Antitumor di-phenyl-di-(2,4-dichlorobenzohydroxamato)tin by Capillary Gas Chromatography The Design of Real-Time Power Detection System in Communication Equipment Research on Frequency Conversion & Selective Measurement and Error Correction Algorithms in Grounding Characteristics Measuring System Identification Research on CMP Multi-Zones Pressure System Measurement of Spacecraft Simulator Motion Parameters Based on Multi-Vision System The Radius of an Ultrashort Pulsed-Laser to Fresnel Diffraction of a Serrated Aperture Study on the Online Dynamic Weighing System of Heavy Duty Apron Feeder Based on Labview A Least Square Solution for Energy-Based Source Localization in Sensor Networks Design of the Time Interval Generator Automatic Verification and Management System A Height Estimation Method Based on Joint Time Delay and Phase Estimation for Wideband InSAR or InSAS Chapter 7: Dynamic Analysis of Mechanical Systems and Mechanical Transmissions A Study on Drive Capstan Stiffness of Cable-Driven Picking Manipulator Structural Vibration Control of the Magnetic Flywheel Based on GA-PID Neural Network Dynamic Analysis of Variable-Step Feeding Vibration Characteristic Similarity Appraisal of Conticaster Vibration Table The Abnormal Vibration Source Analysis of Automobile Drive Axle Study on the Non-Linear Dynamic Stability of a Cracked Rotor System Enclosure Active Structure Acoustic Control Based on Multi-Agent System Effect Factors Analysis of Flow Generation Noise from Muffler Element with Inserted Tube Study on Impact of Powertrain Mounting Stiffness on Vehicle Vibration Characteristics Research on Influence of Intertooth Space Confriction to Transmission Efficiency under EHL A Vibration Analysis and Evaluation System Construction Based on On-Line Inspection Vibration Transfer Analysis of High Speed Train Considering Car body Flexibility Dynamical Analysis for Mechanical Arm of the Coal Sampling Machine Based on Rigid-Flexible Coupling Model A Modal Analysis of Eccentric Shaft of Caster Vibration Device The Development of Structure Random Vibration Parameter Analysis Tool Software under Hot Environment Condition Virtual Prototype Modeling and Dynamic Simulation for a Large Pendulum Study on Dynamic Simulation of Hydraulic Die Forging Hammer Based on VPT Research of Dynamic Performance of Reciprocating Compressor Valve Vibration Modal Analysis of the Upper Frame of Hydraulic Excavator Analysis on Structure Stress Characteristics of Top and Low Slewing Frame of Tower Crane Analysis of Local Stress and Vertical Deflection of Down Chord of Inverted Triangle Cargo Boom of Tower Crane The Design of Transmission Scheme of the 6-Speed Automatic Transmission Based on the 01N Automatic Transmission Analysis on Dynamic Characteristics of Paper Feeding Device Dynamic Simulation and Analysis of a Dual-Link Suspension Dynamic Performance Analysis for Milling Head Box of Spiral Drill Collar Machine Analysis and Modeling of Error Sources for Spiral Bevel Gear Honing Machine Based on Multi-Body System Theory Optimization Method of the Rubber Elastic Element Structure Based on the Vibrational Power Flow Transmission Study on Dynamic Characteristics of Front Suspension LCA Bushing The Study on Experimental Modal Analysis of High-Speed Rotational Shaft Modal Experiment and Analysis of Needle-Punching Machine The Performance Study of Three-Ring Gear Reducer Influence of Top-Structure Form of Tower Crane on the Factor for Hoisting a Grounded Load Research on the Dynamic Characteristic of the Bogie in Dynamic Track Stabilizer on Working Conditions Dynamic Analysis of a Free-Free Beam Research on Involute Master Measuring Apparatus Dynamic Analysis for New Low-Speed Motor with Interior Pushrod Harmonic Transmission Device Methods for Determining the Dynamic Load of the Shipbuilding Gantry Crane Distribution on Transmission Ratio of Cylindrical Gear Reducer Chapter 8: Fluid Power Transmission and Control The Electro-Hydraulic Proportional Technology-Based Experimental Research into Gradually Pressurization System on Cotton Lap of Roll Machine Finite Element Stress Analysis of Intersection Region of Nozzle and Blind Flange Research on Optimization of Flow Field in 60t Tow-Strand Tundish by Hydraulic Model Design and Analysis of Hydro-Viscous Winch Hydraulic System Hybrid Excavator Test Bed Hydraulic Load System Design Research on Pneumatic Performance of Aero-Engine Blades through Function Method Study on De-Icing Fluid Pump Station's Flow Pulsation Suspension Methods Simulation of the HCCI Combustion Based on Single-Zone Combustion Model Design and Implementation of the Integrated Test Platform for the Hydraulic Components Prediction Model of Control Valve Characteristics Numerical Simulation of Convection Heat Transfer in a Plate Channel with Sintered Copper Porous Ribs Theoretical Study of Transmissivity of Electromagnetic Wave in Magnetorheological Fluids Research on Maximum Wind Energy Capturing of DFIG The Research of Internal Fluid State Influence in the Divergency of the Straight Cone-Shape Draft Tube Fluid Field Analysis for Cyclone Separator Used on Grain Cleaning Impeller Finite Element Analysis of Extractable Explosion-Proof Contra-Rotating Axial Fan for Mine Local Ventilation FBDC Chapter 9: Mechatronics A Linear Macro/Micro Platform Design Based on FEM Simulation The Effect of Electrode's Material on Immobilization of Sulfite Oxidase Enzyme in Construction of Sulfite Biosensors A Human Half-Top Kinematic Motion Tracking System Based on Disparity Information of Stereo Camera Map Matching-Aided In-Motion SINS Initial Alignment Modeling and Design of 3D Visualization on Giant Magnetostrictive Actuator A DSP-Based Control System for Precision Variable Rate Fertilization Design of a Type of Cleaning Robot System Analysis of the Biomechanics of the Fingers in Different Writing Stances Modeling of Five-Axis Linkage WEDM for Complex Curved Surface and its Simulation The Study of 3-D Magnetic Field Finite Element Analysis for Giant Magnetostrictive Actuator Development of a Precision Micro-Assembly Machine for ICF Targets Development of Integrated Testing Instrument for Mechatronic System High-Temperature Capacitive Mode Pressure Sensor Based on SiC Characteristics Ansys of Hydraulic Cushion for High-Speed & High-Precision CNC Lathe Optimization Problem Research for Machining Accuracy and Cost of CNC Lathe Based on Adaptive Particle Swarm Optimization The Navigation and Positioning Method of Active plus Passive Ultrasound-Guided Robot for Liver Cancer Coagulation Therapy Sensitivity Analysis and Numerical Simulation of the Planar Mechanism Kinematic Accuracy The Kinematic Modeling of a 2-DOF Rotational Parallel Fixture Design and Realization of Helical Rotor NC Automatic Programming System Design of AMT Hydaulic Shift System Based on the Logical-Shift Formula Fuzzy Adaptive Terminal Sliding Mode Control for Attitude of Flapping Wing Micro Aerial Vehicle Novel Compensator for Aircraft Electromechanical Actuator Research on Magneto-Rheological Torque Servo Devices Study on Tilt Properties of Orifice-Compensated Aerostatic Thrust Bearings Research on the Internal Model Decoupling Control of High Speed Spindle Path Recognition Method for Vision Navigation of Tobacco Harvester Research of CNC Automatic Programming Method Based on Process Database Error Analysis of a 2-PRS/2-UPS 4-DOF Parallel Platform Dynamic Analysis of Key Parts of CNC Milling Machine Based on FEM Finite Element Analysis of Milling Head Box of CNC Machine Tool Statics Analysis for the Crossbeam of Large Gantry CNC Machine under Six Working Conditions Automobile Frame Side Rail Detection System Based on Machine Vision A Practical Algorithm for Ball-End Mill Using a Five-Axis CNC Grinding Machine The Application of PLC in the Stepper Motor Closed-Loop Control System Design Dynamic Analysis and Structure Improvements on Machine Tool Bed Chapter 10: Industrial Robotics Structural Design of the Robot Arm for Massage Based on the Chain Drive Temperature Uniformity Control in the Low Pressure Process Champer of the IC Equipment Study on Two-Step Method for Robot Dynamics Parameters Calibration The Path Optimization of Spray Painting Robot for Two Path Pattern Analyzing Moving Character of a Novel Parallel Mechanism Forward and Inverse Position Solution Analysis of 2UPR/1SPR 3-DOF Parallel Mechanism A Hardware & Software System for Unmanned Ground Vehicle Control with Robotic Arm & Color Detection Robust Adaptive Sliding Mode Synchronous Control for a Planar Redundantly Actuated Parallel Manipulator Research on Pneumatic Control System of Box Unfolding and Closing Mechanism of Horizontal Type Boxing Line Path Planning with Motion Optimization for Car Body-in-White Industrial Robot Applications Industrial Robot Control Using Inertial Navigation System Application of Optimized BPNN Based on QGA in PID Control of Coal Mine Detection Robots An Introduction to Parallel Robot Mechanism Ant Colony Optimization Based on Local Optima Breaking Mechanism for Unmanned Vehicle Path Planning in Cross-Country Environment Study on Genetic Fuzzy Wavelet Neural Network Controller of Robotic Manipulator A New Design of Programmable Multi-Axis Controller A Robot Vision System in ABU Robocon Contest: Visual Servoing Navigation and Object Tracking Chapter 11: Control Technologies and Intelligent Systems Duffing Chaotic System Stability Control Based on Sliding Mode Control An Intelligent Water-Saving System Study on Data Detector of Synchro-Self-Shifting Clutch on Combined Diesel or Gas Turbine Power Plant The PLC Control System of Box Processing Combined Machine Tool Parameterization of Emotion Expression through Robot's Body Language The Effect of Hexa-Orientation Press Control System Development on Diamond Material Grade Multi-Echelon Integrated Inventory Control Strategy of Equipment Spare Parts Research on Vacuum Consumable Arc Remelting Furnace Control System with Drop Short Pulses Testing A System of Multistep Self-Learning Forecast and its Application on Oil Refining Industry Application of Critical-Siphon Theory to Fastest Deadlock Controller for a Class of Flexible Manufacturing Systems Remote Monitoring System on Mining Visualization The Analysis of Soft Starting System of Brushless Excitation Synchronous Motor Based on Adaptive Control in the Process of the Liquid Level Instrumentation Control System Design The Design of AGV Control System and its Application in Printing Center An Exception Handling Approach for Service-Based Business Processes The Research on the Intelligent Control of Geographic Information System Design to Agricultural Production The Vehicles ESP Safe Test System Based on Aid Wheels Breaking Control Vehicle System Design and Implementation of Remote Monitoring System for UPS in Unattended Observation Station Quantum Artificial Bee Colony Algorithm for Knapsack Problem Research on Control Technology of Hydro-Viscous Winch A Chaotic Cellular Neural Network System Research and Implementation Based on FPGA Chapter 11: Control Technologies and Intelligent Systems Research on Cogent Automatic Fingerprint Identification System An Improved Fast Intelligent Tracking Algorithm with the Gain Adjustable The Research and Design of Smart Home Based on Virtual Reality Technology Development of Full-Automatic Flap Disc Production Machine Based on PLC Control System Research on Influencing Spreading Model of Road Congestion Based on Traffic Flow and Cellular Automata Approaches Pole-Placement for Multi-Input Linear Systems by State Feedback or State-Derivative Feedback The Design of the Monitoring System Based on Marine Environment Buoy Automatic Liquid Level Detection System Based on LabVIEW A New Intelligent Device Used for Monitoring Environment Safety Quasi-Likelihood Deconvolution of Non-Gaussian Non-Invertible Moving Average Model The Flow Ratio Process Control System Design Based on Improved PID Algorithm Research of Coke Rate Prediction of Blast Furnace Based on Operative Characteristics of Auxiliary Resources Design of Chemical Water Treatment Control System Based on Quantum PLC Research on Intelligent Elevator Control System Application of the PID Control in Mine Calorific Value Regulating System Based on PLC Identification and Control Design of Fuzzy Takagi-Sugeno Model for Pressure Process Rig A Merging Method for Siphon-Based FMS Maximally Permissive Control with Simple Structures The Application of Fuzzy Smith-PID Controller on Geothermal Air Conditioning System Research on Automatic Testing System of Vehicles Steering Angle Improvement of Set-Covering Weighted Control Model of S3PR Research and Application of Automation Controlling System for Plate Ultra Fast Cooling Process Structures for Weakly Dependent Siphons of S3PR Stability Analysis of Quantized Feedback Control System Intelligent Algorithm in Automatic Fire Alarm Application The Design of Dynamic Response System Based on Digital Emergency Plan Parallel PSO-Based Optimal Strategy Study of Energy Efficient Operation Control for Train The Improvement of Control System of Wind Turbine Gearbox Test Device Chapter 12: Electronic and Microelectronic Technology Design of a SoC With High-Speed DDC for Software Radio Receiver The Application Study of Multifunctional Injuries-Simulating Platform Multi-Band Antenna of Mobile Handset with Metal Frame for Wireless Communication Spacial Filter of Weighting Method Based on Spectrum Analyse One Kind of Study of the Even Charge-up Method of Intelligence for Common Storage Battery Group of UPS Experimental Analysis on Initial Arc Column Voltage Gradient in Fuse Filled with Silica Sand A Effective Equalization Based on Multi-Mode for Series Grouped Battery Strings Design and Implementation of Robot Soccer Communication Protocol Based on Ant Colony Algorithm Design of the Equalizing Charge Circuit Based on Bidirectional Energy Transfer A Novel Three-Port Combiner Based on Coaxial Cavity Development of Uphole Monitor for MWD in Underground Directional Drilling in Coalmine An Opto-Electronic Image Sensor Using for Low-Light-Level in Neutron Digital Radiography(n-DR) Application of Kalman Filter in SOC Estimation of Power Lithium-Ion Battery Poly-NiO/Nb:SrTiO3 Based Resistive Switching Device for Nonvolatile Random Access Memory Design of Counting Device for Contact IC Module The Improved Design of Engine Ignition System A Parallel Space-Time Block Code Based Transmission Scheme Research for Biofouling Detection Based on Optical Fiber Self-Referencing Technique and ANN Synchronization and Anti-Synchronization of the Chaotic Modified Chua's Circuits via a Same Controller Research on UCAV Communication Data Link Capability Increasing Scheme On Application of LDPC Coded Modulation in Optical Fiber Communication Design and Implementation of Radio Spreading-Sequences Beacon Based on Quadrature Frequency-Conversion Design of High-Speed Remote Image Data Storage Memory Based on LVDS Polarization Changes of Elliptically Polarized Laser Beams Propagating in Slant Path through Turbulent Atmosphere The Research and Analysis about Attenuation Characteristics of Wireless Signal in Limited Space The Intelligent Design of Solar LED Street Lamps Based on MCU Design of Automobile Exhaust Wireless Monitor System Based on GPRS/GSM/GPS Design of Azimuth-Sign Wireless Autonomous Positioning System A Highly Directional Light Emitting Diode Light Guide Bar Based on Concave V-Grooves A Low-Distortion Single Fingerprint Acquisition Optical System The Anomalous Threshold Voltage Prediction by Grey Model GM(1,1) for Submicron MOSFETs The Light Extraction Efficiency Enhancement in Organic Light-Emitting Diodes with Substrate Modifications High Efficiency Performance of Stack-Gate 0.35um P-Channel Flash EPROMs Three Dimension Thermal and Mechanical Simulation of Microbolometer to Detect Terahertz Wave Simultaneous Synchronization and Anti-Synchronization of the Two Identical BVP Oscillators A Mobile Computing SoC Design Design and Simulation of High Gain X-Band Horn Antenna for Calibration The Special Research on a Low Noise Amplifier Use of the Fuzzy-Based Taguchi Method for Improving the Yield of BGA Packaging Chapter 13: Embedded System The Contactless Card Reader Based on Microcontrollers The STM32 and Programmable Power Supply Communication in the ELID Grinding Dynamic Control System Embedded Measurement Platform Design for Mine's Dynamic Weighing Bridge The Development and Application of the Basic Functions of the EMS of Four-Cylinder Gasoline Engine The IP Design for a Customized Mobile SoC Embedded Systems to Build Modern Automation and Manufacture An FPGA Based Frame Rate Enhancer for LCD Display in Embedded Systems Study of Embedded Power Environment Remote Video Monitoring System Chapter 14: Signal and Intelligent Information Processing Signal Separation Based on Focused Neural Network Filter Adaptive Reconstruction Based on Romp Algorithm Moving Target Detection Based on Principle of Connectivity and Texture Gradient Shadow Detecting and Shadow Interpolation Algorithm for InSAS A Robust and Rapid Image Preprocessing Method for Finger Vein Weight to Vision Neural Network Information Processing Influence Research Particle Swarm Optimization Least Square Support Machine Based Missing Data Imputation Algorithm in Wireless Sensor Network for Nuclear Power Plant's Environmental Radiation Monitor Research on the Edge Detection Method of the Rice Leaves Image Based on Phase Consistency under the Complex Environment A Hybrid Method to Search the Optimal Hamiltonian Circuit Morphological Reconstruction Based Segmentation of Lung Fields on Digital Radiographs Coordination Method on Cloud Computing Clusters The Method of Feature Extraction of Weak Multi-Frequency Signals Based on the Array of Modulated Stochastic Resonance The Fusion Process of RS(Remote Sensing) Data Based on Wavelet Neural Network Research on the Optimized Algorithms on Neural Network Classification of Single Cereal Grain Kernel Using Shape Parameters Based on Machine Vision Detection for Corn/Weed Images Using Moment Invariants by BPNN Classifier On Implementation of Software Acoustic Cancellation A New Variable Step Size LMS Adaptive Filtering Algorithm and its Analysis Low SNR Singal Recovery System Based on Stochastic Resonance Research on Improved Image Enhancement Algorithm Based on Fuzzy Set A Novel Method to Estimate the Unknown Mixing-Matrix for Blind Source Separation An Information Fusion Algorithm Based on Dopplerlet-Hough Transformation Study of Adaptive Chaos Embedded Particle Swarm Optimization Algorithm Radio Channel Research in Coal Mine Laneways Yawning Detection Based on Mouth Feature Points Curve Fitting Cartoon Avatar Processing Based on Image Edge Detection Analysis of Airplane Timing Equipment's Automatic Test Based on ATS Platform Image Texture Feature Extraction & Recognition of Chinese Herbal Medicine Based on Gray Level Co-Occurrence Matrix Classification of Biological Spectrum Based on Principal Component Cluster Analysis Image Restoration Based on Improved PSO Algorithm Convergence of a Class of Nonorthogonal Wavelet Research on a Kind of Distribution Selection Method for Right Censored Data Based on Data Expansion Algorithm Improved Vision Based Driving Space Analysis by Condensation of Image Data Application of the Compound Model of BP Neural Networks and Wavelet Transform in Image Definition Identification An EEG Analysis Research For Epileptics Using Probabilistic Neural Network Object-Oriented Zhangjiangkou Mangrove Communities Classification Using QuickBird Imagery Applying Data Mining Methods to Structural Identification Inter-Harmonic Detection Based on AR Model Spectral Estimation and Nonlinear Optimization Chapter 15: Software and Computer in Research and Engineering Solutions Ranking Algorithms for Keyword Search over Relational Databases The Application of Bezier Curves about the Visualization of the Threaded Binary Tree Research and Design of the Automobile OBD Data State Monitoring System Based on the Android Phones Fidelity Evaluation of Bridge-Type Grab Ship-Unloader Visual Simulation Risk Assessment of Smart Grid Cyber Security Based on Multi-Level Fuzzy Comprehensive Evaluation Method Scene Simulation of UUV's Glide Motion Based on Creator and Vega Prime Research on the Die Steel Cutting Simulation System Based on Intelligent Layout Algorithm Analysis on A 1-out-n Security Protocol Based on Threshold Idea The Study of Military Conceptual Model Based on Tactical Decision-Making Simulation Managing Emergency Material Distribution Knowledge Using Ontology-Based Modeling for Emergency Distribution Decision Security Design of Web-Based Information Integrated System The Application of Improved Color Petri Net in Hardware Design An Approach of Web Service Discovery and Composition Based on Logic Petri Nets ZigBee Technology Application in Disaster Rescue Parallel Computing Application in Rectangle Packing Problem The Research of Railway Passenger Flow Prediction Model Based on BP Neural Network On Visualization of Journals Reference Network Based on Force-Directed Layout Algorithms The Design of the Sensor Node of IOT Based on SIM20 The Research and Implementation of Geospatial Data Management Based on ArcGIS Service Building Bridges among Local Area Networks Analysis on Internet Attack and Security Objects Collision Detection in Virtual Scene Research of Digital Watermarking Algorithm Based on DCT Transform Weapon-Target Assignment Problem in the Warship Fleet Based on Fast and Elitist Non-Dominated Sorting Genetic Algorithm Early-Warning Model for Tourism Environment Carrying Capacity in Scenic Spots Based on Fuzzy Inference Simulation and Analysis of AUV's Hydrodynamics when Moving in the Near-Seabed Research of Digital Simulating Model of Assembling Shunt Capacitor A B/S-Based Multi-Server Framework for Knowledge Component Implementation Numerical Simulation on the Stress and Strain of Lining Structure with Double Shield Tunneling Construction A Collaborative Filtering Recommendation Method Based on Item Category The Vestibular System Modeling in the Head and Eye Movement Research Design and Implementation of Module Hot-Plugging in Equipment Management Platform A Quantum-Behaved Particle Swarm Algorithm Combined with Chaotic Mutation The Design and Development of Learning Log Management System for C Language Web Classroom Study on Custom Service Combination Based on BPEL Applying RBF Neural Networks and Genetic Algorithms to Nonlinear System Optimization Flow and Density Difference Lattice Model and its Numerical Simulations Analysis Study on Network Emergency Evaluation with Web-Based Information An Intelligent Method Optimizing BP Neural Network Model Error Resilience Scheme for Real-Time Video A Framework for Filtrating Software Measures in Software Measurement Process Research and Implementation on XML-Based Data Exchange Platform The Research and Application of Sorting Algorithm in Aircraft Scheduling Problem Random Choice of Logistics Distribution Route Based on Dynamic Programming Research on Particle Swarm Optimization for Protein Structure Prediction On the Construction of Safety Running and Management Systems for Chinese E-Government System Numerical Simulation of Overpressure about Muzzle Blast Flowfield Application of Visualization and GIS Techniques in Water Conservancy Works Efficient Front-End Cache for XEN Virtual Block Device Development of Information Management System Used in Laboratory Intelligent Voice Terminal with Image Retrieval Function Information Service: Podcast Course Video-Sharing System, for Example Application of Red Spider Software in Multimedia Network Classroom E-Commerce Model Research Based on Cloud Service Slicing Objects Using UML State Diagram Traffic Status Prediction and Analysis Based on Mining Frequent Subgraph Patterns Architecture Design of Urban Intelligent Transportation Using Cloud Computing The Application Research of Private Cloud in the Data Centers Colleges of Universities The Research and Application in Intelligent Document Retrieval Based on Text Quantification and Subject Mapping Research on Evaluation Index System of Multimedia Teaching Software Trust Federation of Identity Management in Distributed Environment Study on Teaching Method of Project in the Operating System Study on the Software Trustworthiness Measurement Algorithm Based on the Grey Relational Analysis Information Hiding of MS-Office Compound Document

by "Nielsen BookData"

Details

• NCID: BB11533162
• ISBN:
  • 9783037855447
• Country Code: sz
• Title Language Code: eng
• Text Language Code: eng
• Place of Publication: Durnten-Zurich
• Pages/Volumes: 3 v. (2619 p.)
• Size: 25 cm
• Subject Headings:
  • LCSH : Engineering design -- Congresses
  • LCSH : Manufacturing processes -- Congresses
  • LCSH : Production engineering -- Congresses
  • LCSH : Product design -- Congresses
• Parent Bibliography ID:
  • BA24926058