Textures of materials : selected, peer reviewed papers from the 16th International Conference on Textures of Materials, (ICOTOM 16), 12-17 December, 2011, Mumbai, India

Author(s)

Bibliographic Information

Textures of materials : selected, peer reviewed papers from the 16th International Conference on Textures of Materials, (ICOTOM 16), 12-17 December, 2011, Mumbai, India

edited by Asim Tewari ... [et al.]

（Materials science forum, v. 702-703）

Trans Tech Publications, c2012

  • pt. 1
  • pt. 2

Other Title

Textures of materials : ICOTOM 16

Available at  / 1 libraries

Search this Book/Journal

Note

Includes bibliographical references and indexes

Description and Table of Contents

Description

The development of specific textures in materials occurs either naturally or by synthesis and processing using various methods. The presence of textures in materials manifests itself in the form of anisotropic properties; the understanding of which is indispensable to precise engineering design. In addition to conventional applications in structural materials, texture control has come to be practised in the form of functional materials. This collection is an edited version of papers presented at the sixteenth international conference on the textures of materials (ICOTOM 16), held at the Indian Institute of Technology in Mumbai, India on December 12-17th, 2011. The proceedings are broadly divided into six sections; the first being a collection of keynote lectures, followed by papers classified under Deformation, Deformation and Annealing, Techniques, Annealing and Materials. Volume is indexed by Thomson Reuters CPCI-S (WoS).

Table of Contents

Preface, Committees and Sponsors Chapter 1: Keynotes The Cube Texture Revisited High Resolution EBSD-Based Dislocation Microscopy Textures in Industrial Processes and Products An Efficient Strategy to Take Texture-Induced Anisotropy Point-by-Point into Account during FE Simulations of Metal Forming Processes Precipitation and Texture Formation in Interstitial Free High Strength (IFHS) Steels: A Short Review Chapter 2: Deformation 2.1 Magnesium Texture Development during Friction Stir Welding of Magnesium Alloys Deep Drawing of ZK60 Wrought Magnesium Alloys Deformation Temperature Effects on Microstructure and Texture Evolution in High Strain Rate Extrusion-Machining of Mg-AZ31B Characteristics of Microstructure and Texture in the Stir Zone of Friction Stir Welded Al-12.7Si-0.7Mg Alloy Effects of a High Magnetic Field on Austenite Decomposition in High Purity Fe-1.1C (wt.%) Alloy Directional Anisotropy in the Mechanical Behavior of Friction Stir Processed and Aged AZ91 Alloy Texture Control of Aluminum and Magnesium Alloys by the Symmetric/Asymmetric Combination Rolling Process Effect of Rolling Temperature on the Evolution of Microstructure, Texture, and Mechanical Properties of AZ31 Mg Alloy Application of Visco-Plastic Self Consistent Approach to Model Deformation Characteristics of Magnesium with Different Textures Microstructure and Texture Evolution during Hot Rolling of Mg-9Li-7Al-1Sn Alloy for Aerospace Application 2.2 Severe Plastic Deformation Development of Microstructure and Texture in Al5052 Alloy Processed at Room and Cryogenic Temperatures in an ECAP Die Microstructure Evolution and Mechanical Behaviour of Severe Plastically Deformed Cu Evolution of Microstructure and Crystallographic Texture in AA2014 Aluminium Alloy during Equal Channel Angular Extrusion On the Bumps and Curves in the Microband Boundaries in a Channel-Die Compressed Goss-Oriented Ni Single Crystal Deformation Induced Percolating Porosity In High Pressure Torsioned (HPT) Copper Metallographic Studies on Deformation Microstructures of ECAE Processed AA 2014 Aluminium Alloy The Role of Processing Routes on the Evolution of Microstructure and Texture Heterogeneity during ECAP of Al-Cu Alloy The Role of Structure and Texture Factors in the Ductility and Deformability Improving of Magnesium Alloys Subjected to ECAP Texture Evolution of IF-Steel Sheets Processed by Equal-Channel Angular Sheet Extrusion (ECASE) Microstructural Investigation of Co-Rolled Nanocrystalline Stainless Steel Sheets Texture, Grain Boundaries, Defects and Location of Substitutional Atoms in Cryo-Mechanically Processed Ti-5Ta-1.8Nb Alloy Grain Refinement Mechanisms Oterative during Equal Channel Angular Pressing of Aluminium Interactive Effects of Strain, Strain-Rate and Temperatures on Microstructure Evolution in High Rate Severe Plastic Deformation Microstructure Refinement During Severe Plastic Deformation (SPD) of FCC Materials: A Texture Based Study Investigation of Microstructure of the Commercial Pure Aluminium in the ARB Process 2.3 ARB & HPT Mechanical Anisotropy of Aluminium Laminates Produced by ARB Ultrafine Grained Microstructure in Al-Cu-Si Alloy Obtained by Accumulative Roll Bonding Process Crystallography of the Low Angle Lamellar Band Boundaries in ARB- Processed Aluminum Sheet An Investigation of Microtexture Evolution in an AlMgSi Alloy Processed by High-Pressure Torsion Texture Evolution of HPT-Processed Ni50Mn29Ga21 Texture Evolution in ARB Processed Commercial Purity Aluminium Texture Evolution of Armco Iron during Accumulative Roll Bonding Process 2.4 Modeling Prediction of the Plastic Anisotropy of Rolled Sheets under a Combined Effect of Texture, Grain Shape and Grain Size On the Orientation of Cell Block Boundaries in the Grains of a Rolled F.C.C. Polycrystal A Rate-Independent 'Stack' Model of a Polycrystalline Aggregate Modeling of Deformation Microstructure - Strain Hardening and Crystallographic Reorientation of Crystallites in a Columnar Polycrystal Microstructural Modeling of Banding in Single Crystals: 'Stack of Domains' Model Crystal Plasticity Predictions of Forward-Reverse Simple Shear Flow Stress Web Adds Some Comments on Lattice Rotation in Aspect of Brass-Copper Texture Transition The Brass-Type Texture - How close Are we to Understand it? Microstructural and Crystallographic Aspects of Yield Surface Evolution New Model for Twin-Variant Selection in Hexagonal Alloys Validation of the Texture-Based ALAMEL and VPSC Models by Measured Anisotropy of Plastic Yielding Characterization and Modeling of Twinning in a Titanium Alloy Ti-6Al-4V Rolling Texture Transition in FCC Metals Using the Viscoplastic -Model and Considering Mechanical Twinning 2.5 Orientation Gradient On the Use of EBSD to Study the Heterogeneity of Plastic Deformation Classification of Textures and Microstructure Stability in Rolled F.C.C. Metals with Grain Interactions Tracking the In-Grain Orientation Spreads in Hot-Deformed Polycrystalline Aluminium: Experiment and Finite Element Simulation On the Role of Local Grain Interactions on Twin Nucleation and Texture Evolution in Hexagonal Materials Grain Orientation Spread Values in if Steels after Plastic Deformation and Recrystallization The Effect of through-Thickness Texture Inhomogeneity on Roping Behavior in AA6111 Al-Si-Mg Alloy 2.6 Experimentation Research Thermal and Mechanical Stability of the Single Component Rotated Brass Texture in a 7010 Aluminum Alloy Texture Evidences of Interaction between Plastic Deformation and Phase Transformations in Zr-Based Alloys Formability Changes of Asymmetrically Rolled AA 3003 Al Alloy Sheets Deformation Behavior of Electro-Deposited Pure Iron with Extremely High R-Value Evolution of Textures during Cold Rolling of W-26Ni-26Fe-13Co and W-28Ni-12Fe-10Co Alloys Effect of Texture on the Mechanical Properties and Ballistic Performance of an Extruded Al-6063 Rod Mechanical Property Anisotropy of 7010 Aluminum Alloy Sheet Having Single Rotated-Brass Texture Fatigue Failure, Residual Stress and Misorientation - A Possible Correlation Effects of Grain Orientations on Nanoindentation Behavior in Hexagonal Zirconium Evolution of Crystallographic Texture in Cold Rolled Al-Zn-Mg Alloys Used in Space Applications Ultra-Fine Grained Al-SiC Metal Matrix Composite by Rotary Swaging Process Nucleation of Recrystallization in Fine Grained AA3104 Alloy Analyzed by SEM and TEM Orientation Mappings Mechanical Property Anisotropy of (CPH) and " (Orthorhombic) Phases in Binary Ti-Nb Alloys Texture Changes of Asymmetrically Rolled AA 1050 Al Alloy Sheets Formation Process of {001} Texture in Al-Cu Solid Solution during High Temperature Compression Deformation Formation Process of Texture in AZ80 Alloy during High Temperature Plane Strain Compression Deformation Gradient Microstructure of FeCr30Co8 Hard Magnetic Alloy Subjected to Plastic Deformation by Complex Loading Influence of Friction Stir Processing Parameters on Anisotropic Behavior Property of 5086-O Aluminum Alloy Microstructure and Texture Evolution of a Cold Rolled Ni-Cr-W Alloy after Annealing Texture and Correlation between R-Value and Formability of Aluminum Alloy Sheet 2.7 Creep and Superplasticity Texture Analysis for Determining the Rate Controlling Process in the Transient and Steady State Regions of Superplastic Flow Key Microstructural Changes during High Strain Rate Superplastic Deformaion of an Al-Zn-Mg-Cu-Zr Alloy Containing Sc Role of Texture in Understanding Creep Flow in HPT-Processed Ultrafine Grained Copper Microstructural Evolution During Superplastic Forming of Al-Li 8090 Alloy Texture Studies of Superplastically Deformed Electrodeposited Nanocrystalline Ni and Ni-P Alloy Chapter 3: Deformation and Annealing 3.1 Cube Texture New Insights into Cube Nuclei in Deformed Aluminium Formation and Development of Strong Cube Recrystallization Texture in an Aluminium of Commercial Purity Effects of Initial Parameters on the Development of Cube Texture during Recrystallization of Copper Stability of Cube Oriented Grains during Cold-Rolling of Highly Cube-Oriented Polycrystalline Nickel Effect of Ultrahigh Straining on the Evolution of Cube Texture ({100}<100>) in High Purity Nickel 3.2 TMP Observations on the Effect of a High Magnetic Field Annealing on the Recrystallized Microstructure and Texture Evolution in Pure Copper Practical Aspects of Texture Analysis in the Aluminum Industry Yield Strength Anisotropy of Steel Sheet Induced by Grain Shape and Crystal Anisotropy On the Impact of Thermo-Mechanical Processing on Texture and the Resultant Anisotropy of Aluminium Sheet Texture Evolution and Softening Processes in an Austenitic Ni-30Fe Alloy Subjected to Hot Deformation and Subsequent Annealing Effect of Hot-Deformation on Micro-Texture in Ultra-Fine Grained HSLA Steel Recrystallization Kinetics and Texture Evolution during Annealing of Fe-23.2Mn-0.57C Alloy Texture Evolution in Thermomechanically Control Processed Multiphase Medium Carbon Microalloyed Steel: Forged, Rolled and Low Cycle Fatigued Microstructures Texture and Microstructure of WE54 Alloy after Hot Rolling and Annealing Texture Evolution in Titanium and Aluminum Sheets Subjected to Friction Roll Surface Processing and Subsequent Annealing Chapter 4: Technique 4.1 3D Microstructure Comparison of Gradients in Orientation and Stress between Experiment and Simulation The Application of 3D-EBSD for Investigating Texture Development in Metals and Alloys Advanced Methods and Tools for Reconstruction and Analysis of Grain Boundaries from 3D-EBSD Data Sets 4.2 Dislocations Dislocation Densities, Slip-System Types and Burgers Vector Populationsinhexagonal and Cubiccrystalsfrom X-Ray Line Profile Analysis Evaluation of Geometrically Necessary Dislocations Density (GNDD) near Phase Boundaries in Dual Phase Steels by Means of EBSD Estimation of the Full Nye Tensor by EBSD-Based Dislocation Microscopy Observations of Dislocation Structure in AA 7050 by EBSD 4.3 X-Ray/Neutron Diffraction Investigation of Texture Gradients of Semi-Finished Products by Neutrons and Photons Recent Advances in Texture Measurement Using Two-Dimensional Detector In-Situ Texture Measurements by Synchrotron Radiation of TRIP Steel during an Austempering Treatment Quantifying Damage Accumulation Using State-of-the-Art FFT Method Generalized Pole Figures and Stored Energy Distribution Function Obtained by X-Ray Diffraction 4.4 Recent Advances Study of Deformation Twinning and Planar Slip in a TWIP Steel by Electron Channeling Contrast Imaging in a SEM EBSD-Based Crystallographic Study on a Ni-Mn-Ga Alloy with Incommensurate 7M Structure High Resolution Orientation Distribution Function Virtual 3D Microstructures with Specified Characteristics of State Variable Distributions Common Region between Euler Subspace and Rodrigues Fundamental Zone for a Cubic Crystal and Orthotropy Sample Symmetry 4.5 EBSD Angular Precision of Automated Electron Backscatter Diffraction Measurements Intelligent Microscopy for EBSD Applications Study of the True Nature of Microband Boundaries in Aluminum with 3D EBSD Local Strain Calculations Using Electron Backscattered Diffraction (EBSD) Measurements and Digital Image Processing Improving the Reliability of EBSD-Based Texture Analysis by a New Large Area Mapping Technique Characterization of Coatings by SEM Based Microdiffraction Texture and Microstructure Evolution in Friction Stir Welded Cu-Al Sheets Characterized by EBSD Metallographic Preparation for Electron Backscattered Diffraction Chapter 5: Annealing 5.1 Grain Coarsening Abnormal Growth Mechanisms of Goss Grains in Grain-Oriented Electrical Steels The Effect of Cold Rolling Direction on the Secondary Recrystallization in Fe-3%Si Steel Texture and Microstructure Evolution during Box Annealing of a Non-Oriented-Grain Electrical Steel Modeling of the Particles Pinning Effect on Grain Growth 5.2 Recrystallization Experimental Investigation of Texture Gradients in Aluminium/Copper Plates Bonded through Explosive Welding Process Facilitated Recrystalization of the Hard-to-Recrystalize Structure in 16% Cr Steel Sheets by one-Pass ECAP Prior to Cold Rolling Recrystallization Textures in Aluminum Alloys: Experimental Study and Modelling Cellular Automata Simulation of Textural Evolution during Primary Static Recrystallization of IF Steel Influence of Nb-Ti Composition on Recrystallization of Ferritic Stainless Steel Recrystallization Behavior Immediately after Hot-Rolling in Ferrite Region in Ultra Low Carbon Sheet Steels Progress of Recrystallisation in Cold Rolled Austenitic Stainless Steel during Cyclic Thermal Process 5.3 Recovery & Recrystallization Study on Recrystallization Behavior of Nb-1Zr-0.1C Alloy Grain Boundary Migration and Grain Growth Texture Evolution in Zn in a High Magnetic Field Vertex Dynamics Simulations of Orientation Dependent Recovery in Deformed Aluminium Single Crystals An EBSD Study of Texture Variation along Pilger Reduced Titanium Alloy Tubes Texture Evolution during Recrystallisation of Cold Rolled TWIP Steel Influence of Rare Earth Addition on Texture Development during Static Recrystallization and Mechanical Behaviour of Magnesium Alloy Sheets Compromising Effect on Development of Recrystallization Texture in Aluminium Sheet - A 2D MC Type Simulation - Study of the Microstructure, Texture and Tensile Properties in as-Extruded AZ91 and ZM21 Magnesium Alloys Modelling Static Recrystallisation Textures Using a Coupled Crystal Plasticity-Phase Field Technique Study of Micro-Texture during Recovery and Recrystallisation in Folded BCC and FCC Sheet Samples Chapter 6: Materials 6.1 Corrosion/Oxidation Combined EBSD and AFM Study of the Corrosion Behaviour of ETP-Cu Study on Sensitization Susceptibility and Texture of Cold Rolled AISI 304LN Stainless Steel Non-Uniform Strain Hardening of Crystallites within Different Regions of Texture Maxima: Evidences and Mechanisms IGSCC of Non-Sensitised Austenitic Stainless Steels in BWR Environment - Effect of Deformation Mode on Grain Boundary Susceptibility Electrochemical Characterization of Low Temperature Thermal Aging Embrittlement of Stainless Steel 304L Weld End Grain Corrosion: Establishing Microstructural Causes and Preventive Steps 6.2 Interfaces Statistical Analysis of Grain Boundaries in the Space of Macroscopic Boundary Parameters Importance of Microscale Texture and Grain Boundary Connectivity to Percolation-Dependent Bulk Properties in Polycrystalline Materials Evolution of Grain Boundary Texture in Zirconium Alloys Origin and Role of 3 Boundaries during Thermo-Mechanical Processing of a Ti-Modified Austenitic Stainless Steel 6.3 Electrical Steel Elemental Distribution Characteristics Across -TiAl:TiAlV Diffusion Bond Interface Recrystallization Textures of Cross-Rolled 3.3% Si Electrical Steel and 99.99% Copper Sheets Correlation between Texture at Primary Recrystallized State and Magnetic Properties in Grain Oriented Electrical Steels Effect of Mn on <100> Texture Evolution in Fe-Si-Mn Alloys Modeling the Magnetic Properties of Non-Oriented Electrical Steels Based on Microstructural Parameters Grrain Orientations and their Influence on Precipitation in Hot Compressed Columnar Grains in Electrical Steel Strong Goss Texture in Recrystallized Fe81Ga19 Sheet Effect of Cold Rolling Reduction Rate on Secondary Recrystallized Texture in 3%Si-Fe Effect of Uni-Axial Tensile Deformation on Microstructure and Magnetic Properties of 3.2% Si Grain Oriented Electrical Steel Orientation Evolutions During Hot Rolling of Electrical Steel Containing Initial Columnar Grains Texture Evolution during Asymmetrical Warm Rolling and Subsequent Annealing of Electrical Steel Through-Thickness Shear Strain in Silicon Steel under Asymmetric Rolling 6.4 Steel Effect of Grain Size and Meso-Texture on the Impact Toughness of Ti-Microalloyed Steel Crystallographic Texture as a Factor Enabling Ductile Fracture Arrest in High Strength Pipeline Steel Microstructure and Texture Evolution in Interstitial-Free (IF) Steel Processed by Multi-Axial Forging Texture Evolution during Cold Rolling and Annealing in Dual Phase Steels Strain Localizations in Ultra Low Carbon Steel Improvement of Crystallographic Texture of High Strength Interstitial Free Steels by the Control of Steel Chemistry and Coiling Temperature Recrystallization Texture of Ferrite Steels: Beyond the -Fibre Annealing Behaviour of Ferritic HT-9 Steel Texture Formation in High Strength Low Alloy Steel Reheated with Ultrafast Heating Rates Microstructure Evolution in Deformed Ultrahigh Carbon Low Alloy (Wootz) Steel Study of Texture in Ultra Fine Grained Dual Phase Steel Sheets Texture Development in Ferritic Steels during High Temperature Uniaxial Compression Deformation Orientation Relationships of Coarse Pearlite Islands Formed in Tundish Well Clogging Deposits Study of Recrystallization and Phase Transformation in a Cold-Rolled Dual-Phase Steel: Influence of Temperature and Heating Rate during First Annealing Stages 6.5 Ti & Zr Effects of Grain Size and Texture on the Biocompatibility of Commercially Pure Titanium Deformation Behaviour of Titanium in Torsion Texture and Microstructure Development during Swaging and Annealing Process of Fabrication of Zircaloy-4 Rod Products Influence of Temperature upon the Texture Evolution and Mechanical Behaviour of Zircaloy-4 Plastic Deformation of Textured Zircaloy 2 Texture Formation in -Zr of Zr-1%Nb Alloy under Radial Forging 6.6 Phase Transformation Current Approaches for Reconstructing the Parent Microtexture from that Inherited by Phase Transformation Variant Selection and Texture in an AISI 301LN Stainless Steel In Situ Observation on the Influence of ss Grain Growth on Texture Evolution during Phase Transformation in Ti-6A-4V Nanocrystallization and Texture Transformation in the Surface Layer of Copper Induced by Surface Mechanical Attrition Determination of the Orientation Relation from Variants Inherited by Phase Transformation Determination of Crystallographic Elements (Dislocation and Surface Plane) from Automated TEM Orientation Determination Evolution of Hot Rolling and Phase Transformation Textures in an " (Orthorhombic) Phase in Ti-Nb Alloys Evolution of Texture during Directional Solidification of Giant Magnetostrictive Tb0.3Dy0.7Fe1.95 Alloy Restitution of Prior-Austenite Grain Orientation by Microtexture Analysis of Tempered Martensite Structure in 9Cr-1Mo Ferritic Steel 6.7 Shape Memory Textural Evolution Evaluated by EBSD and XRD after Thermal Treatment in Ni-Ti Shape Memory Alloy Microstructural Irreversibilities under Thermal Cycling in Ni-Ti-Fe Shape Memory Alloys Evolution of Texture and Microstructure during Cold Rolling and Annealing of Fe-14Mn-6Si-9Cr-5Ni Shape Memory Alloy Deformation Induced Phase Seperation of Ni45Co5 Mn36.7In13.3 Alloy at High Temperature Variants of Texture Formation by Rolling of Ti-Ni Single Crystals with Shape Memory Properties TEM Studies on the Microstructural Changes during Thermo-Mechanical Cycling of NiTi Shape Memory Alloy Wire Texture Formation in Thin Tapes from Ni-Based Ternary Alloys with Cr, W, Mo and V 6.8 Nano Structured Materials Texture of Electrodeposited Nanocrystalline Ni-Fe with Banded Structure An EBSD Study of Gallium Arsenide Nanopillars Investigation on Texture Evolution in Plastic Deformation Layer of SMAT Iron Nanometer Scale Microstructure and Microtexture of Biological Materials Revealed by High Spatial Resolution (15 to 5 kV) EBSD Influence of Additives on Texture Development of Submicro- and Nanocrystalline Nickel 6.9 Microstructural Engineering A Multi-Scale Modeling Approach to Simulate Intergranular Crack Propagation in Textured Polycrystalline Materials Development of Continuously Cooled High Strength Bainitic Steel through Microstructural Engineering at Tata Steel Texture Evolution along the Layer Thickness in a Fe-3%Si Steel under Electropulsing Treatment Effect of Environment on the Surface Modification by Pulse Laser Irradiation of Al-Si/SiCP MMCs Favorable Effect of Ho Addition on the Microstructure and Magnetostriction of Textured Tb0.3Dy0.7Fe1.95 Mesoscopic EBSD Analysis and Mesomechanical Behavior of Ridging or Roping in AA6XXX Alloys Microstructural Analysis of Type 304 Metal Sleeve Process Parameter Impact on Microstructure of Laser Clad Inconel-Chromium Carbide Layers Structure-Property Correlations in Cathodic Arc Deposited TiAlN Coatings The Redistribution and Alignment of Crystalline Flakes in a Bulk Metallic Glass Composite during Thermoplastic Forming Ultrasonic Processing and Microstructural Analysis of AZ91 Magnesium Alloy Effect of Modes of Rolling on Mechanical Properties, Texture and Ballistic Performance of Al-7017 Alloy Effect of Modes of Rolling on Evolution of Texture and Yield Locus Anisotropy in a Multifunctional Ti-31Ta-12Nb-2V-8Zr-0.22O Alloy Effect of Roll Diameter and Modes of Rolling on Evolution of Texture in High Purity Aluminum A Cross-Sectional TEM Study of Abrasive Water Jet Cut Surface 6.10 Non-Metallic Materials Ferroelastic Domains and Anisotropy in Lead Free Piezoelectrics Epitaxial Growth of -Fe2O3 Thin Films on c-Plane Sapphire Substrate by Hydrothermal Method A Stochastic Optimization for the Optimal Texture of Ferroelectrics for Piezoelectric Applications Textured Multiferroics: 2-D Diffraction and Properties Prediction Microstructural Characterization of Ferroelectric Bismuth Ferrite (BiFeO3) Ceramic by Electron Backscattered Diffraction Study of Microstructures in Single Crystalline Chemical Vapor Deposited Diamond Thin Films

by "Nielsen BookData"

Related Books： 1-1 of 1

Details

Page Top