Advances materials engineering and technology : selected, peer reviewed papers from the 2012 International Conference on Advanced Materials Engineering and Technology (ICAMET 2012), November 28-30, 2012, Penang, Malaysia

著者

• International Conference on Advanced Materials Engineering and Technology
• Abdullah, Mohd Mustafa Al Bakri

書誌事項

Advances materials engineering and technology : selected, peer reviewed papers from the 2012 International Conference on Advanced Materials Engineering and Technology (ICAMET 2012), November 28-30, 2012, Penang, Malaysia

edited by Mohd Mustafa Al Bakri Abdullah ... [et al.]

（Advanced materials research, v.626）

Trans Tech Publications, c2013

• : pbk.

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

The collection of peerreviewed papers from researchers, engineers and scientists presents their newadvances and research results in the field of advanced materials engineeringand technology. This volume covered all the aspects of advanced materialsengineering and technology, particularly of advanced characterization,biomaterials, biotechnology and life sciences, building materials, coating andsurface engineering, composite and polymer materials, optical and photonicmaterials and any other related topics. Volume is indexed by Thomson Reuters CPCI-S (WoS).

目次

Preface and Committees Synthesis of TiO2-B2O3-Al Based Porous Composites Preparation and Possible Agricultural Applications of Polymer Hydrogel Composite as Soil Conditioner Structural Study on Lithium-Barium Borophosphate Glasses Using Infrared and Raman Spectroscopy Luminescence Studies on Lithium-Strontium Borophosphate Glasses Doped with Cr, Ni and Zn Ions Application of Biological-Based Antifungal Agent for Controlling the Growth of Wood Decaying Fungi of Rubberwood The Effect of Substrate Temperatures on the Structural and Optical Properties of Cosputtered ZnO and AlN Thin Films The Effect of Ultrasonic Treatment and Gamma Radiation on the Thermal Conductivity of TPNR Hybrid Nanocomposites Unconfined Compressive Strength and Drying Shrinkage of Cement Treated Recycling Base at Boyolali-Kartosuro Road Rehabilitation Mixed Photocatalyst for Sustainable Concrete Construction Utilization of Raw Gypsum as Hydrated Filler in Bagasse Particleboard Bonded with a Formaldehyde-Free Epoxidized Natural Rubber Adhesive Thermoplastic Natural Rubber Based on Blending of Co-Polyester: Effect of Amount of Epoxide Groups in Epoxidized Natural Rubber on Preperties Effect of Sulfur Donor on Properties of Thermoplastic Vulcanizates Based on NR/PP Thermoplastic Elastomer Based on Epoxidized Natural Rubber/Polyamide-12 and Co-Polyamide-12 Blends Preparation of Natural Rubber/Sodium Montmorillonite Nanocomposites by Latex Mixing Method with Drying Process Thermoplastic Natural Rubber Based on Blending of Maleated Natural Rubber and Copolyester: Effect of Blend Ratios on Mechanical, Thermal, Dynamic and Morphological Properties Co-Continuous Phase Structure and Properties of Poly(vinylidene Fluoride)/Epoxidized Natural Rubber Blends Influence of Zinc Oxide Contents on Mechanical, Rheological and Thermal Properties of Thermoplastic Natural Rubber Fundamental Studies on Cure Characteristics and Mechanical Properties of Nanocomposites Based on Epoxidized Natural Rubber (ENR-30) and Montmorillonite Clay Comparing the Seismic Performance of Beam-Column Joints with and without SFRC when Subjected to Cyclic Loading The Impact of Mechanical Vibration on the Hardening of Metallic Surface Optimization of Process Parameters in Bioreduction of Silver Nanoparticles by Pycnoporus sanguineus Generic Framework for Conceptual Design Using Concurrent Engineering Strategy. A Case Study: Advanced Material Application Product Development of Metal Matrix Composite Component An Experimental Study on the Die Roll Height According to the V-Ring Distance of the Fine Blanking Tool for the Seat Recliner Holder with Various Corner Shapes The Carbon Black Sonofication Effects on Vulcanisate Properties of Natural Rubber Mechanical Properties of Engineered Cementitious Composite with Palm Oil Fuel Ash as a Supplementary Binder Effect of Different Olive Stone Particle Size on the Yield and Surface Area of Activated Carbon Production Preparation and Characterization of Fe3O4/TiO2 Composites by Heteroagglomeration A Study of Fe-Based Composite Coating Fabricated by the Self-Propagating High Temperature Synthesis Effect of Ar Gas Pressure on Phase Separation of Tungsten Silicides Intermetallic Compound In Situ Self-Propagating High Temperature Synthesis-Casting Process Applications of Acoustic Emission Technique Associated with the Fracture Process Zone in Concrete Beam - A Review Characteristics of Treated Palm Oil Fuel Ash and its Effects on Properties of High Strength Concrete Morphological Structure of Pretreated Organo Layer Silicate Dispersion in Masterbatch Biodegradable Polymer Cassava Starch Clay Nanocomposite Effect of RF Power on the Structural Properties of Magnetron Sputtered ZnO Thin Films Deposited at Room Temperature Sensitivity of ZnO Based NH3 Sensor by RF Magnetron Sputtering Synthesis of Nano-Structured Ni-Co-Al Hydrotalcites and Derived Mixed Oxides Antibacterial Activity of Copper and CTAB Modified Clays against Pseudomonas aeruginosa The Influence of Deposition Temperature on the Morphology and Corrosion Resistance of Zinc Phosphate Coating on Mild Steel Dimensional Effect on DIBL in Silicon Nanowire Transistors Method of Search and Rescue in Dipterocarp Forest Using GPS Technology Real Time Synchrotron X-Ray Imaging for Nucleation and Growth of Cu6Sn5 in Sn-7Cu-0.05Ni High Temperature Lead-Free Solder Alloys Comparison Studies of Blend and Unblend GPE Systems: Ionic Conductivity, Structural and Morphological Properties Ionic Conductivity and Dielectric Properties of Plasticized Polyacrylonitrile Based Solid Polymer Electrolyte Films Investigation of Vanadium Oxide Thin Film Deposited by Sputtering for Electrochromic Applications Predictive Modeling of TiN Coating Roughness Effects of Calcination Temperature of LUSI Mud on the Compressive Strength of Geopolymer Mortar Effect of Antioxidant on Properties of Thermoplastic Natural Rubber Based on ENR/TPU Blends Effect of Modified Natural Rubber on Properties of Thermoplastic Natural Rubber Based on Co-Polyamide Blends Comparative Properties of Vegetable Oil-Based Benzyl Esters and Vegetable Oils as Processing Oil in Natural Rubber Compounds Influence of Processing Oil and Plasticizer on Properties of ENR-25/TPU Simple Blends Shrinkage Characteristics of Green Engineered Cementitious Composites with Varying Palm Oil Fuel Ash Contents and Water-Binder Ratios Fusion Bonding of Carbon Fiber Reinforced Epoxy Laminates The Effect of Hybridization of the Glass Fiber-Flexible Modified Epoxy and Rigid Epoxy Composite Properties under Low-Velocity Impact Effects of Feeding Angles and Cutting Speeds of a Mower Knife with Serrated Edges on the Pulverization of Sweet Potato Vines The Role of Silica Fume in the Adhesion of Concrete Restoration Systems Optimization of Material Removal Rate in EDM Using Taguchi Method Corrosion Behavior of AZ91 Mg-Alloy Coated with AlN and TiN in NaCl and Hank's Solution Physical and Mechanical Properties of Glass Composite Material Made from Incinerated Scheduled Waste Slag and SLS Waste Glass BET Analysis on Carbon Nanotubes: Comparison between Single and Double Stage Thermal CVD Method Rheological Properties of Zirconia Toughened Alumina Powder for Ceramic Injection Molding Characterization of TiAlBN Nanocomposite Coating Deposited via Radio Frequency Magnetron Sputtering Using Single Hot-Pressed Target Effect of Annealing Temperature on Surface Morphology of Lanthanum Phosphate (LaPO4) Nanostructures Thin Films Effect of Multiwall Carbon Nanotubes (MWCNT) on Mechanical and Electrical Properties of PP/C Composites as Alternative Materials for Bipolar Plate Fuel Cell The Study of the Surface Morphology of PVDF/MgO Nanocomposites Thin Films Surface Modification of Polyvinylidenefluoride-Trifluoroethylene Film Using Argon Gas Plasma Optical Properties and Antibacterial Bioactivity of ZnO Nanopowder Annealed in Different Ambient Effect of Calcinations Temperature on the Structural and Photocatalytic Activity of TiO2 Powders Prepared by Sol-Gel Method Photocatalytic Activity under UV of TiO2 Powders Compared with Commercial P25 Development of Hydroxyapatite Layer on Superplastic Ti-6Al-4V for Biomaterials Applications Evaluation of Silica Fume Effect on Compressive Strength of Structural Lightweight Concrete Containing LECA as Lightweight Aggregate Improvement of Hydrophobicity of Urea Modified Tapioca Starch Film with Lignin for Slow Release Fertilizer Quantitative Evaluation of the Relationship between Tensile Crack and Shear Movement in Concrete Beams Effect of Soya Bean Flour Content on Mechanical Properties and Biodegradability of Poly(vinyl Alcohol) Film Effect of Natural Antioxidants on Curing Characteristics and Crosslink Density of Natural Rubber Vulcanisate An Overview Current Application of Artificial Neural Network in Concrete Influence of Waste Paper Sludge Ash (WPSA) and Fine Recycled Concrete Aggregate (FRCA) on the Compressive Strength Characteristic of Foamed Concrete Numerical and Experimental Studies on Extrusion of Fan-Shaped Shell of Magnesium Alloy Effects of Homogenizing and Extrusion on Elongation of As-Cast AZ80 Magnesium Alloy The Influence of Fly Ash Addition on the Compressive Strength of Concrete Containing Recycle Concrete Aggregates Investigation of the Geometry Modeling of Metal Organic Halide Vapor Phase Epitaxy (MOHVPE) Reactor CdSe Thin Film by Using Spin-Coating Effect of Steel and Alkaline-Resistance Glass Fibre on Mechanical and Durability Properties of Lightweight Foamed Concrete A Novel Porous-Polymer-Supported Ru(II)-dm-Pheox Catalyst and its Application in Highly Efficient N-H Insertion Reactions Viscosity Effect on Piezoelectric Actuated Nozzle in Generating Micro Droplet Parameter Optimerization for Photo Polymerization of Microstereolithography Characterization of Titanium Dioxide Nanopowder Synthesized by Sol Gel Grinding Method Effects of Cobalt Addition and Temperature on Microstructure and Density of W-25Cu Composites Prepared via Liquid Infiltration Investigation on Fabricating High Aspect Ratio Microholes on Silicon by FIB/SEM Milling A Study of Unmanned Aerial Vehicle Photogrammetry for Environment Mapping: Preliminary Observation Microstructural Evolution in Partially Homogenized AZ91 Alloy during Hot Rolling and Interpass Annealing The Influence of AlkaliTreatment and Compatibilizer Addition on the Tensile Properties and Water Absorption Behavior of Polypropylene/Kenaf Fiber Composites Role of Salt Concentration Lithium Perchlorate on Ionic Conductivity and Structural of (Glycidyl Methacrylate-co-Ethyl Methacrylate) (70/30) Based on a Solid Polymer Electrolyte Simulation and Analysis for Harvesting Dioscorea hispida Tubers Development of Novel Detection Device for Chemical Properties of Dioscorea hispida The Factors Affecting the Swelling of W-Bronze Composite System at Different Sintering Conditions Isolation and Characterization of Cellulose Producing Bacterial Strain from Orange Pulp Effect of Voltage and Suspension Medium on Stanum Oxide (SnO2) Film Prepared by Electrophoretic Deposition (EPD) Evaluation on the Thermal Conductivity of Sand-Cement Blocks with Kenaf Fiber Comparison between the Nominal Loss in 3%SiFe and Amorphous Transformer Core Materials Synthesis of Polylactic Acid from Fermentative Lactic Acid by Direct Polycondensation for Materials Application Misfit Dislocation Reduction of InxGa1-xN/GaN Heteroepitaxy Using Graded Layer Char Strength of Wool Fibre Reinforced Epoxy-Based Intumescent Coatings (FRIC) Co2 Solubility in Silica Supported [hmim][Tf2N] Stability of Created Nano-Holes from Electrodeposited Organic SAMs (Thiols) on Gold Polycrystalline Films Effects of Activating Flux on Inconel 718 Alloy and AISI 304 Stainless Steel Dissimilar TIG Welds Preparation and Characterization of Rice Husk Powder Incorporated Natural Rubber Latex Foam Aqueous Dispersion of Rice Husk Powder as a Compatible Filler for Natural Rubber Latex Foam Effect of Ball Milling Parameters on the Synthesization of Carbon Nanotube Aluminium Nano Composite Tensile Properties Evaluation of Paper Pulp Packaging at Different Sections and Orientations on the Egg Tray Comparative Study between Candida antarctica Lipase B and Pseudomonas floroscens as Catalyst for Polycaprolactone Production Low Temperature Catalytic Steam Gasification of Waste Palm Trunk by Pottasium Carbonate Supported on Perovskite Oxide Experimental Investigation on the Shear Behaviour of Concrete Beams Reinforced with GFRP Reinforcement Bars Quality Evaluation of Cold Embossed Hole Based on Profile Measurement Technique The Effect of pH on Zinc Phosphate Coating Morphology and its Corrosion Resistance on Mild Steel Differences between 2D and 3D Interlaminar Fracture Analysis of Unidirectional Carbon/Epoxy Arcan Specimens: Numerical and Experimental Approaches Fabrication and Photoresponse of Self-Organized TiO2 Mesoporous by Alternative Voltage Condition Development of Lubricants Evaluation for Different Friction Laws by Using Rigid-Plastic Finite Element Method Energy Absorption Characteristics of Interface Modified GFRP Laminates under Low Velocity Impact Effects of Various Additives on Drying Shrinkage, Compressive and Flexural Strength of Lightweight Foamed Concrete (LFC) Effects of Cavity Length on Optical Characteristics of Deep Violet InGaN DQW Lasers Effect of Electrolyte Concentration on the Growth of Porous Anodic Aluminium Oxide (AAO) on Al-Mn Alloys A Study on the Rheological Properties of Low-Density Polyethylene/Palm Kernel Shell Composites Effect of Post-Heated Concrete Cylinders Repaired with CFRP Reinforcement Study on Performance and Characteristic of Microorganisms in a Waste-to-Energy System In Vitro Biodegradability of Poly(lactic Acid)/Hydroxyapatite Biocomposites Prepared by Solvent-Blending Technique Improving Surface Durability of High Volume Fly Ash Concrete with Application of Alkali Solution Effect of Silane Coupling Agent on the Curing, Tensile, Thermal, and Swelling Properties of EPDM/Mica Composites Comparison between the Nominal Loss in 3%SiFe and Amorphous Transformer Core Materials Effects of Silane Coupling Agent on Mechanical Properties and Swelling Behaviour of Coconut Fiber Filled Polypropylene Composite Study of Cold Rotary Forming by Using Rigid-Plastic Finite Element Method Cytostatic Activity of Clinoptilolite against Human Cervical Cancer Cell Lines Using Three Different Media-Sterilization Techniques Morphological and Structural Study of Nanostructured Tin Dioxide (SnO2) Thin Films by Spray Pyrolysis Moisture Absorption and Shock Cushioning Behavior of Flexible Polyurethane Foam Filled with Saw Dust Effect of EDA/PEGDGE Mole Ratios on PEG-Based Hydrogel Scaffolds Properties Thermophysical Properties of Ionic Liquid with Thiocyanate Anion: Effect of Cations Printing Qualities on Inkjet-Printed Paper from Varnish Coating Agent with Rice Husk Silica Particles Effect of Partial Replacements of Sand by Waste Rubber on the Low Impact Resistance of Concrete Studies on Dissimilar Welding of AA5083 and AA6061 Alloys by Laser Beam Welding Comparison on Pore Development of Activated Carbon Produced from Scrap Tire by Hydrochloric Acid and Sulfuric Acid Mechanical Properties and Morphologies of PP/Co-PP/Talc Composites for Microwave Application Structures and Properties of Isotactic-Polypropylene/Synthesized Micro Cellulose Tray: Effects of Micro Cellulose Loading Optimization of Annealing Temperature for PVDF-TrFE (70:30 mol %) Thin Film The Structural Studies of Oxirane Ring Opening Reaction in Epoxidized Natural Rubber (ENR-50) by SnCl2.2H2O and the Formation of ENR/TiN Complex Hybrid Characteristics of Fe-Yttria Composites Fabricated by Powder Metallurgy Method Varistor-Like Effect in Zinc Oxide Bionanocomposite Efflorescence Phenomenon on Concrete Structures Effects of Zinc Chloride Impregnation on the Characteristics of Activated Carbon Produced from Physic Nut Seed Hull Study on Renewable Resource-Based Composites from Agro Waste Alpinia galanga Natural Fibers Contribution of Polypropylene Fibre in Improving Strength of Foamed Concrete Effect of Uncontrolled Burning Rice Husk Ash in Foamed Concrete The Evaluation of High Calcium Green Polymeric Concrete Lightweight Fly Ash-Based Geopolymer Concrete Effect of Diluents on Crystallite Size and Electronic Band Gap of ZnO Nanoparticles Synthesized by Mechanochemical Processing Research Advances of Composite Solder Material Fabricated via Powder Metallurgy Route Research Development of Solder Materials and its Intermetallic Compound (IMC) Study The Effects of Tensile and Morphological Properties of Styrene Butadiene Rubber/Recycled Chloroprene Rubber (SBR/CRr) Blends Characteristics of Corrosion Degradation in Carbon Steel Pipelines Bacillus megaterium sp. as Degradation Agent for Biodegradable Natural Rubber Latex Films Effect of Nanosilica Fillers on the Cure Characteristics and Mechanical Properties of Natural Rubber Composites Synthesis of Porous Silica via Styrene Natural Rubber Sacrificial Template The Effects of Kenaf Loadings and 3-aminopropyltriethoxysilane (APTES) Coupling Agent on Mechanical Properties of Polypropylene/Waste Tire Dust/Kenaf (Pp/WTD/KNF) Composites Iodine Doping of Amorphous Carbon Thin Films Deposited by Thermal CVD Effect of Curing Regime on Compressive Strength of Concrete Containing Malaysian Laterite Aggregate Post-Growth Annealing Effects on the Photoluminescence of ZnO Nanoparticle-Based Discs Microstructures Study on Cuprous Oxide Thin Films Deposited on Different Substrates by Using Sol-Gel Technique Ultra Compact 1x11 Power Splitter Using Polydiacetylene Multimode Interference Coupler The Influence of Micro Algae on Corrosion of Steel in Fly Ash Geopolymer Concrete: A Preliminary Study A Brief Review of the Current Technologies Used for the Fabrication of Metal-Molecule-Metal Junction Electrodes Application of Clay - Based Geopolymer in Brick Production: A Review Effect of Cobalt Stearate on Outdoor Exposure of LLDPE/Soy Spent Powder Blends Preparation of Activated Carbon from Durian Shell and Seed Reviews on the Properties of Aggregates Made with or without Geopolymerisation Method A Three Dimensional Finite Element of Anterior Cruciate Ligament Model Development of Bioreactor System for Generating Three-Dimensional (3D) Tissue Engineering Synthesis of Eu2+, Dy3+ Co-Doped Mal2O4 Phosphor (M = Ba, Sr) by In Situ Self-Propagating High Temperature Synthesis X-Ray Powder Diffraction Studies of Mechanically Milled Cobalt Feasibility of Producing Wood Fibre-Reinforced Geopolymer Composites (WFRGC) Strength and Microstructural Properties of Mechanically-Activated Kaolin Geopolymers Effect of Curing Regimes on Metakaolin Geopolymer Pastes Produced from Geopolymer Powder The Effect of Curing Time on the Properties of Fly Ash-Based Geopolymer Bricks Parametric Study and Thickness Evaluation of Photoresist Development for the Formation of Microgap Electrodes Using Surface Nanoprofiler Material Characterization of Al-Si/SiCpp Composite via Pressureless Infiltration Using Polystyrene as External Binder Classification of Damage Mode of Reinforced Concrete Beams Using Acoustic Emission Technique Reviews on the Geopolymer Materials for Coating Application Potential of Marine Clay as Raw Material in Geopolymer Composite Effects of Annealing Treatment on Structural, Optical and Morphology Characteristics of ZnO Nanostructures Effect of Soil Type in Compressed Earth Brick (CEB) with Uncontrolled Burnt Rice Husk Ash (RHA) Critical Size Structure Parameters for Au Nanoparticles Three Dimensional Simulation of Thermal Pad Using Nanomaterial, Nanosilver in Semiconductor and Electronic Component Application Synergistic Effect on Flexural Properties of Kenaf-Glass Hybrid Composite Effect of Blockage Size on Pipe Vibration Review of Extraction of Silica from Agricultural Wastes Using Acid Leaching Treatment Study on Milling Periods on the Iron Mill Scale Particle Size and Properties Potential Application of Palm Ash as a Raw Materials in Production of Green Glass The Effects of Rattan Filler Loadings on Mechanical Properties and Morphological Study of Rattan Powder Filled-Polypropylene Composites Effect of Pyrolysis on the Wettability Behaviour of Polyethylene Terephthalate on Petroleum Coke Experimental of Wood Gasification in Suction Biomass Gasifier Nano-Optical Fiber Evanescent Field Sensors FT-IR and Morphology of Different Recycled Acrylonitrile-Butadiene Rubber Glove (NBRgr) Size and its Blend Ratios of SBR/NBRr Blends On the Crushing Behavior of Foam-Filled Composite Tubes under Compressive Loading Fabrication of Nanowire Using Ash Trimming Technique Low Density Polyethylene (LDPE)/Thermoplastic Sago Starch (TPSS) Blend Filled with Kenaf Core Fiber (KCF)

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB11949852
• ISBN:
  • 9783037855713
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: xxi, 1068 p.
• 大きさ: 25 cm
• 親書誌ID:
  • BA24926058