Advances materials engineering and technology : selected, peer reviewed papers from the 2012 International Conference on Advanced Materials Engineering and Technology (ICAMET 2012), November 28-30, 2012, Penang, Malaysia
著者
書誌事項
Advances materials engineering and technology : selected, peer reviewed papers from the 2012 International Conference on Advanced Materials Engineering and Technology (ICAMET 2012), November 28-30, 2012, Penang, Malaysia
（Advanced materials research, v.626）
Trans Tech Publications, c2013
- : pbk.
大学図書館所蔵 全1件
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
The collection of peerreviewed papers from researchers, engineers and scientists presents their newadvances and research results in the field of advanced materials engineeringand technology. This volume covered all the aspects of advanced materialsengineering and technology, particularly of advanced characterization,biomaterials, biotechnology and life sciences, building materials, coating andsurface engineering, composite and polymer materials, optical and photonicmaterials and any other related topics.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
目次
Preface and Committees
Synthesis of TiO2-B2O3-Al Based Porous Composites
Preparation and Possible Agricultural Applications of Polymer Hydrogel Composite as Soil Conditioner
Structural Study on Lithium-Barium Borophosphate Glasses Using Infrared and Raman Spectroscopy
Luminescence Studies on Lithium-Strontium Borophosphate Glasses Doped with Cr, Ni and Zn Ions
Application of Biological-Based Antifungal Agent for Controlling the Growth of Wood Decaying Fungi of Rubberwood
The Effect of Substrate Temperatures on the Structural and Optical Properties of Cosputtered ZnO and AlN Thin Films
The Effect of Ultrasonic Treatment and Gamma Radiation on the Thermal Conductivity of TPNR Hybrid Nanocomposites
Unconfined Compressive Strength and Drying Shrinkage of Cement Treated Recycling Base at Boyolali-Kartosuro Road Rehabilitation
Mixed Photocatalyst for Sustainable Concrete Construction
Utilization of Raw Gypsum as Hydrated Filler in Bagasse Particleboard Bonded with a Formaldehyde-Free Epoxidized Natural Rubber Adhesive
Thermoplastic Natural Rubber Based on Blending of Co-Polyester: Effect of Amount of Epoxide Groups in Epoxidized Natural Rubber on Preperties
Effect of Sulfur Donor on Properties of Thermoplastic Vulcanizates Based on NR/PP
Thermoplastic Elastomer Based on Epoxidized Natural Rubber/Polyamide-12 and Co-Polyamide-12 Blends
Preparation of Natural Rubber/Sodium Montmorillonite Nanocomposites by Latex Mixing Method with Drying Process
Thermoplastic Natural Rubber Based on Blending of Maleated Natural Rubber and Copolyester: Effect of Blend Ratios on Mechanical, Thermal, Dynamic and Morphological Properties
Co-Continuous Phase Structure and Properties of Poly(vinylidene Fluoride)/Epoxidized Natural Rubber Blends
Influence of Zinc Oxide Contents on Mechanical, Rheological and Thermal Properties of Thermoplastic Natural Rubber
Fundamental Studies on Cure Characteristics and Mechanical Properties of Nanocomposites Based on Epoxidized Natural Rubber (ENR-30) and Montmorillonite Clay
Comparing the Seismic Performance of Beam-Column Joints with and without SFRC when Subjected to Cyclic Loading
The Impact of Mechanical Vibration on the Hardening of Metallic Surface
Optimization of Process Parameters in Bioreduction of Silver Nanoparticles by Pycnoporus sanguineus
Generic Framework for Conceptual Design Using Concurrent Engineering Strategy. A Case Study: Advanced Material Application Product Development of Metal Matrix Composite Component
An Experimental Study on the Die Roll Height According to the V-Ring Distance of the Fine Blanking Tool for the Seat Recliner Holder with Various Corner Shapes
The Carbon Black Sonofication Effects on Vulcanisate Properties of Natural Rubber
Mechanical Properties of Engineered Cementitious Composite with Palm Oil Fuel Ash as a Supplementary Binder
Effect of Different Olive Stone Particle Size on the Yield and Surface Area of Activated Carbon Production
Preparation and Characterization of Fe3O4/TiO2 Composites by Heteroagglomeration
A Study of Fe-Based Composite Coating Fabricated by the Self-Propagating High Temperature Synthesis
Effect of Ar Gas Pressure on Phase Separation of Tungsten Silicides Intermetallic Compound In Situ Self-Propagating High Temperature Synthesis-Casting Process
Applications of Acoustic Emission Technique Associated with the Fracture Process Zone in Concrete Beam - A Review
Characteristics of Treated Palm Oil Fuel Ash and its Effects on Properties of High Strength Concrete
Morphological Structure of Pretreated Organo Layer Silicate Dispersion in Masterbatch Biodegradable Polymer Cassava Starch Clay Nanocomposite
Effect of RF Power on the Structural Properties of Magnetron Sputtered ZnO Thin Films Deposited at Room Temperature
Sensitivity of ZnO Based NH3 Sensor by RF Magnetron Sputtering
Synthesis of Nano-Structured Ni-Co-Al Hydrotalcites and Derived Mixed Oxides
Antibacterial Activity of Copper and CTAB Modified Clays against Pseudomonas aeruginosa
The Influence of Deposition Temperature on the Morphology and Corrosion Resistance of Zinc Phosphate Coating on Mild Steel
Dimensional Effect on DIBL in Silicon Nanowire Transistors
Method of Search and Rescue in Dipterocarp Forest Using GPS Technology
Real Time Synchrotron X-Ray Imaging for Nucleation and Growth of Cu6Sn5 in Sn-7Cu-0.05Ni High Temperature Lead-Free Solder Alloys
Comparison Studies of Blend and Unblend GPE Systems: Ionic Conductivity, Structural and Morphological Properties
Ionic Conductivity and Dielectric Properties of Plasticized Polyacrylonitrile Based Solid Polymer Electrolyte Films
Investigation of Vanadium Oxide Thin Film Deposited by Sputtering for Electrochromic Applications
Predictive Modeling of TiN Coating Roughness
Effects of Calcination Temperature of LUSI Mud on the Compressive Strength of Geopolymer Mortar
Effect of Antioxidant on Properties of Thermoplastic Natural Rubber Based on ENR/TPU Blends
Effect of Modified Natural Rubber on Properties of Thermoplastic Natural Rubber Based on Co-Polyamide Blends
Comparative Properties of Vegetable Oil-Based Benzyl Esters and Vegetable Oils as Processing Oil in Natural Rubber Compounds
Influence of Processing Oil and Plasticizer on Properties of ENR-25/TPU Simple Blends
Shrinkage Characteristics of Green Engineered Cementitious Composites with Varying Palm Oil Fuel Ash Contents and Water-Binder Ratios
Fusion Bonding of Carbon Fiber Reinforced Epoxy Laminates
The Effect of Hybridization of the Glass Fiber-Flexible Modified Epoxy and Rigid Epoxy Composite Properties under Low-Velocity Impact
Effects of Feeding Angles and Cutting Speeds of a Mower Knife with Serrated Edges on the Pulverization of Sweet Potato Vines
The Role of Silica Fume in the Adhesion of Concrete Restoration Systems
Optimization of Material Removal Rate in EDM Using Taguchi Method
Corrosion Behavior of AZ91 Mg-Alloy Coated with AlN and TiN in NaCl and Hank's Solution
Physical and Mechanical Properties of Glass Composite Material Made from Incinerated Scheduled Waste Slag and SLS Waste Glass
BET Analysis on Carbon Nanotubes: Comparison between Single and Double Stage Thermal CVD Method
Rheological Properties of Zirconia Toughened Alumina Powder for Ceramic Injection Molding
Characterization of TiAlBN Nanocomposite Coating Deposited via Radio Frequency Magnetron Sputtering Using Single Hot-Pressed Target
Effect of Annealing Temperature on Surface Morphology of Lanthanum Phosphate (LaPO4) Nanostructures Thin Films
Effect of Multiwall Carbon Nanotubes (MWCNT) on Mechanical and Electrical Properties of PP/C Composites as Alternative Materials for Bipolar Plate Fuel Cell
The Study of the Surface Morphology of PVDF/MgO Nanocomposites Thin Films
Surface Modification of Polyvinylidenefluoride-Trifluoroethylene Film Using Argon Gas Plasma
Optical Properties and Antibacterial Bioactivity of ZnO Nanopowder Annealed in Different Ambient
Effect of Calcinations Temperature on the Structural and Photocatalytic Activity of TiO2 Powders Prepared by Sol-Gel Method
Photocatalytic Activity under UV of TiO2 Powders Compared with Commercial P25
Development of Hydroxyapatite Layer on Superplastic Ti-6Al-4V for Biomaterials Applications
Evaluation of Silica Fume Effect on Compressive Strength of Structural Lightweight Concrete Containing LECA as Lightweight Aggregate
Improvement of Hydrophobicity of Urea Modified Tapioca Starch Film with Lignin for Slow Release Fertilizer
Quantitative Evaluation of the Relationship between Tensile Crack and Shear Movement in Concrete Beams
Effect of Soya Bean Flour Content on Mechanical Properties and Biodegradability of Poly(vinyl Alcohol) Film
Effect of Natural Antioxidants on Curing Characteristics and Crosslink Density of Natural Rubber Vulcanisate
An Overview Current Application of Artificial Neural Network in Concrete
Influence of Waste Paper Sludge Ash (WPSA) and Fine Recycled Concrete Aggregate (FRCA) on the Compressive Strength Characteristic of Foamed Concrete
Numerical and Experimental Studies on Extrusion of Fan-Shaped Shell of Magnesium Alloy
Effects of Homogenizing and Extrusion on Elongation of As-Cast AZ80 Magnesium Alloy
The Influence of Fly Ash Addition on the Compressive Strength of Concrete Containing Recycle Concrete Aggregates
Investigation of the Geometry Modeling of Metal Organic Halide Vapor Phase Epitaxy (MOHVPE) Reactor
CdSe Thin Film by Using Spin-Coating
Effect of Steel and Alkaline-Resistance Glass Fibre on Mechanical and Durability Properties of Lightweight Foamed Concrete
A Novel Porous-Polymer-Supported Ru(II)-dm-Pheox Catalyst and its Application in Highly Efficient N-H Insertion Reactions
Viscosity Effect on Piezoelectric Actuated Nozzle in Generating Micro Droplet
Parameter Optimerization for Photo Polymerization of Microstereolithography
Characterization of Titanium Dioxide Nanopowder Synthesized by Sol Gel Grinding Method
Effects of Cobalt Addition and Temperature on Microstructure and Density of W-25Cu Composites Prepared via Liquid Infiltration
Investigation on Fabricating High Aspect Ratio Microholes on Silicon by FIB/SEM Milling
A Study of Unmanned Aerial Vehicle Photogrammetry for Environment Mapping: Preliminary Observation
Microstructural Evolution in Partially Homogenized AZ91 Alloy during Hot Rolling and Interpass Annealing
The Influence of AlkaliTreatment and Compatibilizer Addition on the Tensile Properties and Water Absorption Behavior of Polypropylene/Kenaf Fiber Composites
Role of Salt Concentration Lithium Perchlorate on Ionic Conductivity and Structural of (Glycidyl Methacrylate-co-Ethyl Methacrylate) (70/30) Based on a Solid Polymer Electrolyte
Simulation and Analysis for Harvesting Dioscorea hispida Tubers
Development of Novel Detection Device for Chemical Properties of Dioscorea hispida
The Factors Affecting the Swelling of W-Bronze Composite System at Different Sintering Conditions
Isolation and Characterization of Cellulose Producing Bacterial Strain from Orange Pulp
Effect of Voltage and Suspension Medium on Stanum Oxide (SnO2) Film Prepared by Electrophoretic Deposition (EPD)
Evaluation on the Thermal Conductivity of Sand-Cement Blocks with Kenaf Fiber
Comparison between the Nominal Loss in 3%SiFe and Amorphous Transformer Core Materials
Synthesis of Polylactic Acid from Fermentative Lactic Acid by Direct Polycondensation for Materials Application
Misfit Dislocation Reduction of InxGa1-xN/GaN Heteroepitaxy Using Graded Layer
Char Strength of Wool Fibre Reinforced Epoxy-Based Intumescent Coatings (FRIC)
Co2 Solubility in Silica Supported [hmim][Tf2N]
Stability of Created Nano-Holes from Electrodeposited Organic SAMs (Thiols) on Gold Polycrystalline Films
Effects of Activating Flux on Inconel 718 Alloy and AISI 304 Stainless Steel Dissimilar TIG Welds
Preparation and Characterization of Rice Husk Powder Incorporated Natural Rubber Latex Foam
Aqueous Dispersion of Rice Husk Powder as a Compatible Filler for Natural Rubber Latex Foam
Effect of Ball Milling Parameters on the Synthesization of Carbon Nanotube Aluminium Nano Composite
Tensile Properties Evaluation of Paper Pulp Packaging at Different Sections and Orientations on the Egg Tray
Comparative Study between Candida antarctica Lipase B and Pseudomonas floroscens as Catalyst for Polycaprolactone Production
Low Temperature Catalytic Steam Gasification of Waste Palm Trunk by Pottasium Carbonate Supported on Perovskite Oxide
Experimental Investigation on the Shear Behaviour of Concrete Beams Reinforced with GFRP Reinforcement Bars
Quality Evaluation of Cold Embossed Hole Based on Profile Measurement Technique
The Effect of pH on Zinc Phosphate Coating Morphology and its Corrosion Resistance on Mild Steel
Differences between 2D and 3D Interlaminar Fracture Analysis of Unidirectional Carbon/Epoxy Arcan Specimens: Numerical and Experimental Approaches
Fabrication and Photoresponse of Self-Organized TiO2 Mesoporous by Alternative Voltage Condition
Development of Lubricants Evaluation for Different Friction Laws by Using Rigid-Plastic Finite Element Method
Energy Absorption Characteristics of Interface Modified GFRP Laminates under Low Velocity Impact
Effects of Various Additives on Drying Shrinkage, Compressive and Flexural Strength of Lightweight Foamed Concrete (LFC)
Effects of Cavity Length on Optical Characteristics of Deep Violet InGaN DQW Lasers
Effect of Electrolyte Concentration on the Growth of Porous Anodic Aluminium Oxide (AAO) on Al-Mn Alloys
A Study on the Rheological Properties of Low-Density Polyethylene/Palm Kernel Shell Composites
Effect of Post-Heated Concrete Cylinders Repaired with CFRP Reinforcement
Study on Performance and Characteristic of Microorganisms in a Waste-to-Energy System
In Vitro Biodegradability of Poly(lactic Acid)/Hydroxyapatite Biocomposites Prepared by Solvent-Blending Technique
Improving Surface Durability of High Volume Fly Ash Concrete with Application of Alkali Solution
Effect of Silane Coupling Agent on the Curing, Tensile, Thermal, and Swelling Properties of EPDM/Mica Composites
Comparison between the Nominal Loss in 3%SiFe and Amorphous Transformer Core Materials
Effects of Silane Coupling Agent on Mechanical Properties and Swelling Behaviour of Coconut Fiber Filled Polypropylene Composite
Study of Cold Rotary Forming by Using Rigid-Plastic Finite Element Method
Cytostatic Activity of Clinoptilolite against Human Cervical Cancer Cell Lines Using Three Different Media-Sterilization Techniques
Morphological and Structural Study of Nanostructured Tin Dioxide (SnO2) Thin Films by Spray Pyrolysis
Moisture Absorption and Shock Cushioning Behavior of Flexible Polyurethane Foam Filled with Saw Dust
Effect of EDA/PEGDGE Mole Ratios on PEG-Based Hydrogel Scaffolds Properties
Thermophysical Properties of Ionic Liquid with Thiocyanate Anion: Effect of Cations
Printing Qualities on Inkjet-Printed Paper from Varnish Coating Agent with Rice Husk Silica Particles
Effect of Partial Replacements of Sand by Waste Rubber on the Low Impact Resistance of Concrete
Studies on Dissimilar Welding of AA5083 and AA6061 Alloys by Laser Beam Welding
Comparison on Pore Development of Activated Carbon Produced from Scrap Tire by Hydrochloric Acid and Sulfuric Acid
Mechanical Properties and Morphologies of PP/Co-PP/Talc Composites for Microwave Application
Structures and Properties of Isotactic-Polypropylene/Synthesized Micro Cellulose Tray: Effects of Micro Cellulose Loading
Optimization of Annealing Temperature for PVDF-TrFE (70:30 mol %) Thin Film
The Structural Studies of Oxirane Ring Opening Reaction in Epoxidized Natural Rubber (ENR-50) by SnCl2.2H2O and the Formation of ENR/TiN Complex Hybrid
Characteristics of Fe-Yttria Composites Fabricated by Powder Metallurgy Method
Varistor-Like Effect in Zinc Oxide Bionanocomposite
Efflorescence Phenomenon on Concrete Structures
Effects of Zinc Chloride Impregnation on the Characteristics of Activated Carbon Produced from Physic Nut Seed Hull
Study on Renewable Resource-Based Composites from Agro Waste Alpinia galanga Natural Fibers
Contribution of Polypropylene Fibre in Improving Strength of Foamed Concrete
Effect of Uncontrolled Burning Rice Husk Ash in Foamed Concrete
The Evaluation of High Calcium Green Polymeric Concrete
Lightweight Fly Ash-Based Geopolymer Concrete
Effect of Diluents on Crystallite Size and Electronic Band Gap of ZnO Nanoparticles Synthesized by Mechanochemical Processing
Research Advances of Composite Solder Material Fabricated via Powder Metallurgy Route
Research Development of Solder Materials and its Intermetallic Compound (IMC) Study
The Effects of Tensile and Morphological Properties of Styrene Butadiene Rubber/Recycled Chloroprene Rubber (SBR/CRr) Blends
Characteristics of Corrosion Degradation in Carbon Steel Pipelines
Bacillus megaterium sp. as Degradation Agent for Biodegradable Natural Rubber Latex Films
Effect of Nanosilica Fillers on the Cure Characteristics and Mechanical Properties of Natural Rubber Composites
Synthesis of Porous Silica via Styrene Natural Rubber Sacrificial Template
The Effects of Kenaf Loadings and 3-aminopropyltriethoxysilane (APTES) Coupling Agent on Mechanical Properties of Polypropylene/Waste Tire Dust/Kenaf (Pp/WTD/KNF) Composites
Iodine Doping of Amorphous Carbon Thin Films Deposited by Thermal CVD
Effect of Curing Regime on Compressive Strength of Concrete Containing Malaysian Laterite Aggregate
Post-Growth Annealing Effects on the Photoluminescence of ZnO Nanoparticle-Based Discs
Microstructures Study on Cuprous Oxide Thin Films Deposited on Different Substrates by Using Sol-Gel Technique
Ultra Compact 1x11 Power Splitter Using Polydiacetylene Multimode Interference Coupler
The Influence of Micro Algae on Corrosion of Steel in Fly Ash Geopolymer Concrete: A Preliminary Study
A Brief Review of the Current Technologies Used for the Fabrication of Metal-Molecule-Metal Junction Electrodes
Application of Clay - Based Geopolymer in Brick Production: A Review
Effect of Cobalt Stearate on Outdoor Exposure of LLDPE/Soy Spent Powder Blends
Preparation of Activated Carbon from Durian Shell and Seed
Reviews on the Properties of Aggregates Made with or without Geopolymerisation Method
A Three Dimensional Finite Element of Anterior Cruciate Ligament Model
Development of Bioreactor System for Generating Three-Dimensional (3D) Tissue Engineering
Synthesis of Eu2+, Dy3+ Co-Doped Mal2O4 Phosphor (M = Ba, Sr) by In Situ Self-Propagating High Temperature Synthesis
X-Ray Powder Diffraction Studies of Mechanically Milled Cobalt
Feasibility of Producing Wood Fibre-Reinforced Geopolymer Composites (WFRGC)
Strength and Microstructural Properties of Mechanically-Activated Kaolin Geopolymers
Effect of Curing Regimes on Metakaolin Geopolymer Pastes Produced from Geopolymer Powder
The Effect of Curing Time on the Properties of Fly Ash-Based Geopolymer Bricks
Parametric Study and Thickness Evaluation of Photoresist Development for the Formation of Microgap Electrodes Using Surface Nanoprofiler
Material Characterization of Al-Si/SiCpp Composite via Pressureless Infiltration Using Polystyrene as External Binder
Classification of Damage Mode of Reinforced Concrete Beams Using Acoustic Emission Technique
Reviews on the Geopolymer Materials for Coating Application
Potential of Marine Clay as Raw Material in Geopolymer Composite
Effects of Annealing Treatment on Structural, Optical and Morphology Characteristics of ZnO Nanostructures
Effect of Soil Type in Compressed Earth Brick (CEB) with Uncontrolled Burnt Rice Husk Ash (RHA)
Critical Size Structure Parameters for Au Nanoparticles
Three Dimensional Simulation of Thermal Pad Using Nanomaterial, Nanosilver in Semiconductor and Electronic Component Application
Synergistic Effect on Flexural Properties of Kenaf-Glass Hybrid Composite
Effect of Blockage Size on Pipe Vibration
Review of Extraction of Silica from Agricultural Wastes Using Acid Leaching Treatment
Study on Milling Periods on the Iron Mill Scale Particle Size and Properties
Potential Application of Palm Ash as a Raw Materials in Production of Green Glass
The Effects of Rattan Filler Loadings on Mechanical Properties and Morphological Study of Rattan Powder Filled-Polypropylene Composites
Effect of Pyrolysis on the Wettability Behaviour of Polyethylene Terephthalate on Petroleum Coke
Experimental of Wood Gasification in Suction Biomass Gasifier
Nano-Optical Fiber Evanescent Field Sensors
FT-IR and Morphology of Different Recycled Acrylonitrile-Butadiene Rubber Glove (NBRgr) Size and its Blend Ratios of SBR/NBRr Blends
On the Crushing Behavior of Foam-Filled Composite Tubes under Compressive Loading
Fabrication of Nanowire Using Ash Trimming Technique
Low Density Polyethylene (LDPE)/Thermoplastic Sago Starch (TPSS) Blend Filled with Kenaf Core Fiber (KCF)
「Nielsen BookData」 より