Design and manufacture of textile composites
著者
書誌事項
Design and manufacture of textile composites
（Woodhead Publishing in textiles）
Woodhead Pub. , CRC Press, 2005
- Woodhead
- CRC
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
"Published by Woodhead Publishing Limited in association with The Textile Institute"--T.P. verso
Includes bibliographical references and index
内容説明・目次
- 巻冊次
-
CRC ISBN 9780849325939
内容説明
Textile composites encompass a rather narrow range of materials, based on three-dimensional reinforcements produced using specialist equipment. This book describes the design, manufacture and applications of textile composites. The intention is to describe the broad range of polymer composite materials with textile reinforcements, from woven and non-crimp commodity fabrics to 3-D textiles and their applications. The book gives particular attention to the modelling of textile structures, composites manufacturing methods, and subsequent component performance. This practical book is an invaluable guide for manufacturers of polymer composite components, end-users and designers, structural materials researchers, and textile manufacturers involved in the development of new products with textile composites.
目次
Introduction
A Long, University of Nottingham, UK
Manufacturing and internal geometry of textiles
S Lomov, I Verpoest, Katholieke Universiteit Lueven, Belgium and F Robitaille, University of Ottawa, Canada
- Hierarchy of textile materials
- Textile yarns
- Woven fabrics
- Braided fabrics
- Multi-axial multiply non-crimp fabrics
- Modeling of internal geometry of textile performs
- References
Mechanical analysis of textiles
A Long, University of Nottingham, UK P Boisse, INSA Lyon, France and F Robitaille, University of Ottawa, Canada
- Introduction
- In-plane shear
- Biaxial in-plane tension
- Compaction
- References
Rheological behavior of pre-impregnated textile composites
P Harrison and M Clifford, University of Nottingham, UK
- Introduction
- Deformation mechanisms
- Review of constitutive modeling work
- Characterization methods
- Forming evaluation methods
- Summary
- References
Forming textile composites
A Long, University of Nottingham, UK and W Yu, Seoul National University, Korea
- Introduction
- Mapping approaches
- Constitutive modeling approach
- Concluding remarks and future direction
- Acknowledgements
- References
Manufacturing with thermosets
J Dominy, Carbon Concepts Limited, and C Rudd, University of Nottingham, UK
- Introduction
- Pre-impregnated composites
- Liquid molding of textile composites
- References
Composites manufacturing - thermoplastics
M D Wakeman and J E Manson, Swiss Federal Institute of Technology (EPFL), Switzerland
- Introduction
- Consolidation of thermoplastic composites
- Textile thermoplastic composite material forms
- Processing Routes
- Novel thermoplastic composite manufacturing routes
- Conclusions
- Acknowledgements
- References
Modeling, optimization and control of resin flow during manufacturing of textile composites with liquid molding
A Gokce and S G Advani, University of Delaware, USA
- Liquid composite molding processes
- Flow through porous media
- Liquid injection molding simulation
- Gate location optimization
- Disturbances in the mold filling process
- Active control
- Passive control
- Conclusion
- Future outlook
- References
Mechanical properties of textile composites
I A Jones, University of Nottingham, and A K Pickett, Cranfield University, UK
- Introduction
- Elastic behavior
- Failure and impact behavior
- References
Flammability and fire resistance of composites
R Horrocks and B K Kandola, Bolton Institute, UK
- Introduction
- Constituents - their physical, chemical, mechanical and flammability properties
- Flammability of composite structures
- Methods of imparting flame retardancy to composites
- Conclusions
- References
Cost analysis
M D Wakeman and J E Manson, Swiss Federal Institute of Technology (EPFL), Switzerland
- Introduction
- Cost estimate methodologies
- Cost build-up in textile composite applications
- Case Study 1: Thermoplastic composite stamping
- Case Study 2: Composites for the airbus family
- Conclusions
- Acknowledgements
Aerospace applications
J Lowe, Tenex Fibres GmbH, Germany
- Developments in woven fabric applications using standard prepreg processing
- Carbon Fibre multiaxial fabric developments
- Improvement in standard fabric technology for non-prepreg processing applications
- Braided materials
- Tailored fibre placement
- Performing
- Repair of fabric components
Application of textile composites in the construction industry
J Chilton, University of Lincoln, and R Velasco, University of Nottingham, UK
- Introduction
- Case studies
- Future Developments
- References
Textile reinforced composites in medicine
J G Ellis, Ellis Developments Ltd, UK
- Splinting material
- Walking support frame
- Bone Plates
- General application
- Living composites
Textile composites in sports products
K Van de Velde, Ghent University, Belgium
- Introduction
- Materials
- Design
- Production technology
- Applications
- Conclusion
- References
- 巻冊次
-
Woodhead ISBN 9781855737440
内容説明
The term 'textile composites' is often used to describe a rather narrow range of materials, based on three-dimensional reinforcements produced using specialist equipment. In Design and manufacture of textile composites, however, the term is used to describe the broad range of polymer composite materials with textile reinforcements, from woven and non-crimp commodity fabrics to three dimensional textiles.Whilst attention is given to modelling of textile structures, composites manufacturing methods and subsequent component performance, it is substantially a practical book, intended to help all those developing new products with textile composites. Chapters on modelling include material models and data of use to both researchers and manufacturers, along with case studies for real components. Chapters on manufacturing describe both current processing technologies and emerging areas, and give practical processing guidelines. The last section contains a number of chapters covering applications from a broad range of areas, including transportation, sporting construction and medical applications. As well as illustrating typical components in each area, associated design methodologies and interactions between processing and performance are covered.Design and manufacture of textile composites is an invaluable guide for manufacturers of polymer composite components, end-users and designers, researchers in the fields of structural materials and technical textiles and textile manufacturers. It will also provide manufacturers of traditional textiles with new areas to investigate and potential markets.
目次
- Manufacturing and internal geometry of textiles
- Mechanical analysis of textiles
- Rheological behaviour of pre-impregnated textile composites
- Forming textile composites
- Manufacturing with thermosets
- Composites manufacturing - thermoplastics
- Modeling, optimization and control of resin flow during manufacturing of textile composites with liquid molding
- Mechanical properties of textile composites
- Flammability and fire resistance of composites
- Cost analysis
- Aerospace applications
- Application of textile composites in the construction industry
- Textile reinforced composites in medicine
- Textile composites in sports products.
「Nielsen BookData」 より