Risk-based assessment and management strategies

著者

• Bilitewski, Bernd
• Darbra, Rosa Mari
• Barceló, Damià
• Åström, Stefan

書誌事項

Risk-based assessment and management strategies

volume editors: Bernd Bilitewski, Rosa Mari Darbra, Damià Barceló ; with contributions by S. Åström ... [et al.]

（The handbook of environmental chemistry, v. 23. Global risk-based management of chemical additives ; 2）

Springer, c2013

注記

Includes bibliographical references and index

内容説明・目次

内容説明

Chemical additives are used to enhance the properties of many industrial products. Since their release into the environment is a potential risk for man and nature, their fate and behavior have been investigated in the framework of the European Union-funded project RISKCYCLE. The results are presented in two volumes, Global Risk-Based Management of Chemical Additives I: Production, Usage and Environmental Occurrence and Global Risk-Based Management of Chemical Additives II: Risk-Based Assessment and Management Strategies. This book is the second of the two volumes and features two main parts. In the first part, experts in the field discuss different models related to the assessment of the potential risks posed by chemical additives and analyze their benefits and drawbacks. In the second part, specific case studies in which the models have been applied are presented and the reliability of the models is evaluated. This volume is an invaluable source of information for scientists and governmental agencies dealing with the risk assessment of chemicals on a global scale.

目次

Introduction D. Barcelo, R.M. Darbra, B. Bilitewski, V. Grundmann, A. Zehm PART I. METHODOLOGIES FOR THE GLOBAL MANAGEMENT STRATEGIES Life cycle assessment of additives: methodology and data Ester van der Voet, Lauran van Oers, Tomas Rydberg, Jenny Westerdahl, Henrik Fred Larsen Characterization of environmental exposure: measuring versus modelling Daniel Guillen, Antoni Ginebreda, Rosa M Darbra, Meritxell Gros, Mira Petrovic, Damia Barcelo Toxicological and eco-toxicological studies for additives Nazanin Golbamaki Bakhtyari, Diego Baderna, Elena Boriani, Marta Schuhmacher, Susanne Heise, Emilio Benfenati A revision of current models for environmental and human health impact and risk assessment for application to emerging chemicals J. Rovira, M. Nadal, J. L. Domingo, T. Tanaku, N. A. Suciu, M. Trevisan, E. Capri, X. Segui, R. M. Darbra, M. Schuhmacher Are chemicals in products good or bad for the society? - The economic perspective Stefan Astroem, Maria Lindblad, Jenny Westerdahl, Tomas Rydberg RiISKCYCLE and EU legislation Uwe Lahl adn Barbara Zeschmar-Lahl PART II. CASE STUDIES Two sides of one coin: relations between hazardous substances and valuable resources Henning Friege Toxicological characterization of waste-related products using alternative methods: three case studies D. Baderna, N. Golbamaki, S. Maggioni, M. Vaccari, A. Colacci, E. Benfenati LCA case study on printed matter Henrik Fred Larsen LCA case study Cushion Vinyl Floor Covering and DEHP: Environmental impacts of use and recycling of additives (DEHP) in products Lauran van Oers and Ester van der Voet Chemicals in leather - international trends on risk based control and management Stefan Rydin Managing e-waste in eeveloped and developing countries Suthipong Sthiannopkao Mass emissions of pollutants from e-waste processed in China and human exposure assessment Hong-Gang Ni and Eddy Y. Zeng Tracking global flows of e-waste additives by using substance flow analysis (SFA), with a case study in China H. Tien, S. Heise, X. Segui, J. Casal, R. M. Darbra, N. Suciu, E. Capri, M. Trevisan, M. Schuhmacher, M. Nadal, J. Rovira Human and environmental impact producted by e-waste releases at Guiyu region (China) N. Suciu, E. Capri, M. Trevisan, T. Tanaka, H. Tien, S. Heise, M. Schuhmacher, M. Nadal, J. Rovira, X. Segui, J. Casal, R. M. Darbra In search of zero waste: an experiment in progress C.F. Mahler, A.S. Schueler, Z. Fonseca Mineral oil in board and paper recycling Antje Kersten, Hans-Joachim Putz, Samuel Schabel Proposed plan for disposal of mercury bearing lamps for India Suneel Pandey, Rakesh Hooda, Arabinda Mishra Study the substitution of fossil fuels by RDF produced from municipal solid waste of Hanoi - a case study Nguyen Thi Diem Trang, Ngoc N.B. PART III. CONCLUSIONS Conclusions B. Bilitewski, A. Zehm, V. Grundmann, R.M.Darbra, D. Barcelo Toxicological and eco-toxicological studies for additives Nazanin Golbamaki Bakhtyari, Diego Baderna, Elena Boriani, Marta Schuhmacher, Susanne Heise, Emilio Benfenati A revision of current models for environmental and human health impact and risk assessment for application to emerging chemicals J. Rovira, M. Nadal, J. L. Domingo, T. Tanaku, N. A. Suciu, M. Trevisan, E. Capri, X. Segui, R. M. Darbra, M. Schuhmacher Are chemicals in products good or bad for the society? - The economic perspective Stefan Astroem, Maria Lindblad, Jenny Westerdahl, Tomas Rydberg RISKCYCLE and EU legislation Uwe Lahl adn Barbara Zeschmar-Lahl PART II. CASE STUDIES Two sides of one coin: relations between hazardous substances and valuable resources Henning Friege Toxicological characterization of waste-related products using alternative methods: three case studies D. Baderna, N. Golbamaki, S. Maggioni, M. Vaccari, A. Colacci, E. Benfenati LCA case study on printed matter Henrik Fred Larsen LCA case study Cushion Vinyl Floor Covering and DEHP: Environmental impacts of use and recycling of additives (DEHP) in products Lauran van Oers and Ester van der Voet Chemicals in leather - international trends on risk based control and management Stefan Rydin Managing e-waste in eeveloped and developing countries Suthipong Sthiannopkao Mass emissions of pollutants from e-waste processed in China and human exposure assessment Hong-Gang Ni and Eddy Y. Zeng Tracking global flows of e-waste additives by using substance flow analysis (SFA), with a case study in China H. Tien, S. Heise, X. Segui, J. Casal, R. M. Darbra, N. Suciu, E. Capri, M. Trevisan, M. Schuhmacher, M. Nadal, J. Rovira Human and environmental impact producted by e-waste releases at Guiyu region (China) N. Suciu, E. Capri, M. Trevisan, T. Tanaka, H. Tien, S. Heise, M. Schuhmacher, M. Nadal, J. Rovira, X. Segui, J. Casal, R. M. Darbra In search of zero waste: an experiment in progress C.F. Mahler, A.S. Schueler, Z. Fonseca Mineral oil in board and paper recycling Antje Kersten, Hans-Joachim Putz, Samuel Schabel Proposed plan for disposal of mercury bearing lamps for India Suneel Pandey, Rakesh Hooda, Arabinda Mishra Study of the substitution of fossil fuels by RDF produced from municipal solid waste of Hanoi - a case study Nguyen Thi Diem Trang, Ngoc N.B. PART III. CONCLUSIONS Conclusions B. Bilitewski, A. Zehm, V. Grundmann, R.M.Darbra, D. Barcelo Environmental fate models N. Suciu, T. Tanaka, M. Trevisan, M. Schuhmacher, M. Nadal, J. Rovira, X. Segui, J. Casal, R. M. Darbra, E. Capri Toxicological and eco-toxicological studies for additives Nazanin Golbamaki Bakhtyari, Diego Baderna, Elena Boriani, Marta Schuhmacher, Susanne Heise, Emilio Benfenati A revision of current models for environmental and human health impact and risk assessment for application to emerging chemicals J. Rovira, M. Nadal, J. L. Domingo, T. Tanaku, N. A. Suciu, M. Trevisan, E. Capri, X. Segui, R. M. Darbra, M. Schuhmacher Are chemicals in products good or bad for the society? - The economic perspective Stefan Astroem, Maria Lindblad, Jenny Westerdahl, Tomas Rydberg RiISKCYCLE and EU legislation Uwe Lahl adn Barbara Zeschmar-Lahl PART II. CASE STUDIES Two sides of one coin: relations between hazardous substances and valuable resources Henning Friege Toxicological characterization of waste-related products using alternative methods: three case studies D. Baderna, N. Golbamaki, S. Maggioni, M. Vaccari, A. Colacci, E. Benfenati LCA case study on printed matter Henrik Fred Larsen LCA case study Cushion Vinyl Floor Covering and DEHP: Environmental impacts of use and recycling of additives (DEHP) in products Lauran van Oers and Ester van der Voet Chemicals in leather - international trends on risk based control and management Stefan Rydin Managing e-waste in eeveloped and developing countries Suthipong Sthiannopkao Mass emissions of pollutants from e-waste processed in China and human exposure assessment Hong-Gang Ni and Eddy Y. Zeng Tracking global flows of e-waste additives by using substance flow analysis (SFA), with a case study in China H. Tien, S. Heise, X. Segui, J. Casal, R. M. Darbra, N. Suciu, E. Capri, M. Trevisan, M. Schuhmacher, M. Nadal, J. Rovira Human and environmental impact producted by e-waste releases at Guiyu region (China) N. Suciu, E. Capri, M. Trevisan, T. Tanaka, H. Tien, S. Heise, M. Schuhmacher, M. Nadal, J. Rovira, X. Segui, J. Casal, R. M. Darbra In search of zero waste: an experiment in progress C.F. Mahler, A.S. Schueler, Z. Fonseca Mineral oil in board and paper recycling Antje Kersten, Hans-Joachim Putz, Samuel Schabel Proposed plan for disposal of mercury bearing lamps for India Suneel Pandey, Rakesh Hooda, Arabinda Mishra Study the substitution of fossil fuels by RDF produced from municipal solid waste of Hanoi - a case study Nguyen Thi Diem Trang, Ngoc N.B. PART III. CONCLUSIONS Conclusions B. Bilitewski, A. Zehm, V. Grundmann, R.M.Darbra, D. Barcelo

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB12426328
• ISBN:
  • 9783642345715
• 出版国コード: gw
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Berlin
• ページ数/冊数: xvii, 478 p.
• 大きさ: 25 cm
• 分類:
  • DC23 : 577.27
• 件名:
  • LCSH : Environmental chemistry
  • LCSH : Chemical industry -- Risk management
• 親書誌ID:
  • BA00566617