Advances in chemical, material and metallurgical engineering : selected, peer reviewed papers from the 2012 2nd International Conference on Chemical, Material and Metallurgical Engineering (ICCMME 2012), December 15-16, 2012, Kunming, China

Author(s)

• International Conference on Chemical, Material and Metallurgical Engineering
• Zeng. Jianmin
• Zhu, Hongxi
• Kong, Jianyi

Bibliographic Information

Advances in chemical, material and metallurgical engineering : selected, peer reviewed papers from the 2012 2nd International Conference on Chemical, Material and Metallurgical Engineering (ICCMME 2012), December 15-16, 2012, Kunming, China

edited by Jianmin Zeng, Hongxi Zhu and Jianyi Kong

（Advanced materials research, v. 634-638）

Trans Tech Publications, c2013

• : [set]
• Part 1
• Part 2
• Part 3
• Part 4
• Part 5

Note

Includes bibliographical references and indexes

Description and Table of Contents

Description

Volume is indexed by Thomson Reuters CPCI-S (WoS). The 5 volumes set contains selected, peer reviewed papers from the 2012 2nd International Conference on Chemical, Material and Metallurgical Engineering (ICCMME 2012), December 15-16, 2012, Kunming, P.R. of China. The ICCMME series provide the most up-to-date and authoritative knowledge from both industrial and academic worlds, sharing best practice in the field of Chemical Engineering, Chemistry, Materials and Materials Processing and Metallurgical Engineering. The meeting provided an opportunity to highlight recent developments and to identify emerging and future areas of growth in these exciting fields.

Table of Contents

Preface and Conference Organization Chapter 1: Theoretical and Computational Chemistry Chemical Bonding Characteristics of Lanthanide Complexes: a Case of Valence Study Development of the Simulation Software on the Complex Reaction Kinetics Energy-Level Splitting of Cs2NaYCl6 Crystal Doped with Praeseodymium NBO Analysis the Chlorine Anion Recognition Mechanism of the Urea-Based Involving Iodine and Fluorine Derivation Functional Molecular Material The Computer Simulation of the Acid-Base Titration The Junction Width Effect on Inelastic Electron Tunneling Spectroscopy in Octanethiolate Molecular Junctions The Orientation Effect on Inelastic Electron Tunneling Spectroscopy in Octanethiolate Molecular Junctions The Geometry Structure and Molecular Vibrational Property of the Zeatin The Geometry Structures and IR Properties of the Urea-Based Derivation Functional Molecular Materials Used for the Chlorine Anion Recognition Research on the Viscosity of CaF2-SiO2-Al2O3-CaO-MgO Slag System by the Thermodynamic Software Density Functional Study of H2S Adsorption on Small Agn (n = 1-5) Boundary Element Numerical Method for Electric Field Intensity Generated by Ten-Needle Electrodes in Vacuum Chapter 2: Analytical and Environmental Chemistry, Waste Disposal and Utilization Technology A Comparison of Three Indophenol Blue Methods for Measuring Ammonium in Five Types of Soils in China Catalytic Voltammetric Determination of Vanadium in Crude Oil at Carbon Nanotube Paste Electrode Comparison of Electrochemical Behaviors of Chalcopyrite, Bornite, Chalcocite and Covellite in 9K Medium Comparative Study of Geo-Accumulation Index and Enrichment Factor in Source Apportionment of Atmospheric Particulate Matter Decolourization of Methylene Blue by Persulfate Discrimination and Simultaneous Determination of 6-BA and KT by Polarized Synchronous Light Scattering and Synchronous Light Scattering Spectrum Improvement on Determination of the Components of Industrial Sodium Polysulfide Investigations of the Isotropic G Factors for the Cubic Fe+ Centers in LiF and NaF GC/MS Analysis of Soluble Fraction by Microwave-Assisted Extraction with Acetone from Two Kinds of Coal Indirect Spectrophotometric Determination of Methimazole Using Phenanthroline-Fe(II) Hydrothermal Sulfidation of Hemimorphite with Elemental Sulfur Research on Determination and Preparation of Diphenic Acid Studies on Organic Carbon Distribution Characteristics of Organic- Mineral Complex in Sediment of Yitong River Study on Effects of Different Types of Acid Rain on Nutritional Quality of Pakchoi Studies on the Interaction Mechanism between Lithium Chloride and Amorphous Al(OH)3 Survey and Evaluation of Heavy Metal Elements Pollution of Changchun Suburb Land The Nitrogen Distribution Characteristics of Different Colloidal Dispersion Complex in Yitong River Sediments Alkylpyridinium Hydrosulfate Ionic Liquids as Novel Additives for Zinc Electrodeposition Two-Phase Beckmann Rearrangement of Cyclohexanone Oxime under Milder Conditions in Cyclohexane Effects of Soil Amendments on Coastal Saline-Alkali Soil Improvement and the Growth of Plants Chromium Contamination in Sediments of Love River Mouth, Taiwan A Novel Method for Producing Phenazine by Using Waste from the Synthesis Process of 4-Amino-Diphenylamine A Post-Si CMP Cleaning Using BDD Film Electrochemical Oxidation A Review on the Immobilization of Heavy Metals with Geopolymers Adsorption Properties of Pomelo Peels against Methylene Blue in Dye Wastewater Acid Endurance and Sorption of Zn2+ of Anaerobic Granular Sludge Acclimated by Flue Gas Pretreatment Wastewater Adsorption of Cu (II) on Thiourea Impregnated Gelatin Microspheres Adsorption of Pollutants from Water with Carbon Nanotubes Analysis of Alumina Red Mud Wet Flue Gas Desulfurization (FGD) Technology Application of Chemical Precipitation in Treating Ammonia Nitrogen from Excess Sludge Liquor Determination of Thiocyanate in Desulfurization Waste Solution by Spectrophotometry Effect of Temperature on Recovery of Iron from Waste Slag of Pyrite Processing Experimental Research on Application of Tailings Mortar for Treatment of Copper-Nickel Acid Wastewater Electrochemical Oxidation of 4-Chlorophenoxyacetic Acid on Ti/SnO2-Sb2O5/PbO2 Anode for Waste Water Treatment Evaluation of the Effects of Environmental Materials on Pb and Cd Immobilization Influence of Sewage Sludge on the Slurrying Properties and Co-Gasification Kinetics of Coal-Sludge Slurries Leaching Behaviors of Chemical Components from Steel Slag Microwave-Assisted Preparation and Physical Characterisation of Iron Oxyhydroxides Adsorbents for Arsenic Removal from Aqueous Solutions Removal of Iron in Nickel Precipitation Residue Wastewater with Magnesium Oxide Recovery of Nickel and Cobalt from Dimethyldithiocarbamate Precipitation of Pyrolusite Leaching Process Study on Degradation of Dyes Wastewater by N-Doped TiO2 Study on Disinfection of Oilfield Wastewater Status on the Sulfur Resources Reclamation from the Phosphogypsum Study on the Removal of Heavy Metals by Biomass Study on Modified PVA- H3BO3 Immobilization Microorganism Method for Hydrogen Production from Wastewater Study on Treatment Effect of Three Types of Industrial Wastewater by Ammonium Molybdate-Modified Bentonite Study the Adsorption of Mold/Bentonite Composite Adsorbent on Acid Purplish Red in Wastewater Study on CaSO3 and CaO as Additives of Slag Cement Supercritical Water Oxidation Kinetics of Textiles Dyeing Wastewater Studying of the Grafting Modification on the PP Melt-Blown Non-Woven Fabric Used in Sewage Filtration The Experimental Study on Performance of the High-Content Slag Cementitious Materials The Recycling Spent Catalyst of Furfural Hydrogenation with Pressure Sulphuric Acid Leaching Treatment Investigation on Retting Hemp Waste Water with the Synergy of Activated Carbon and Microwave Treatment of Industrial Dimethylamine Wastewater in a Distillation Tower at Lab Scale Flocculation Performance of Trimethoxysilane Modified Polymer Flocculant for Wastewater from Effluent A/O Bioreactor Removal of Dichloroethylene in Water Using a Novel TCAS-Loaded Resin Degradating Organophosphosphous Pesticides Wastewater by Sonophotocatalytic Oxidation Technology Influence of Reaction Temperature on Nitrate Removal from Water by SSI Treatment of Membrane Concentrated "Young" Landfill Leachate by Coagulation Sedimentation Research in Surface Modification and Anti-Fouling of Polypropylene Porous Membrane Kinetics of Leaching Silicon from the Acid Leaching Residue of Pyrolusite Study on the Properties of Fe3+ Sorption to SrZr4(PO4)6 Materials Adsorption of Fluorine from Aqueous Solution by Chitosan Magnetic Microspheres of Loading Lanthanum Chapter 3: Fine Chemicals, Specialty Chemicals and Processes A Comparison of the H3PW12O40/MCM-41 and HY Zeolite for Alkenylation of p-Xylene with Phenylacetylene Application of Additives in 1,8-Cineole Purification ECF Bleaching of Pre-Hydrolyzed Larix Kraft Pulp for Production of Dissolving Pulp Effects of Concentration of TiOSO4 and Fe/TiO2 Ratio on TiO2 Anatase White Pigment Production via Short Sulfate Process Influence of pH on the Antioxidative Activity of Maillard Reaction Products Generation from Model Reaction of L-Ascorbic Acid and L-Lysine/L-Methionine Isolation of Oxymatrine from Alkaloids of Sophora Flavescens Ait. by H103 Macroporous Resin Liquid-Liquid Equillibria for the (Water + Methanol + Citral) System at 283.15 and 313.15 K Optimization of Difenoconazole Suspension Concentrates Formulation with Orthogonal Method Rapid Photochemical Synthesis of 6-Methyl-1-Indanone Separation and Purification of 1, 8 - Cineole by Molecular Distillation Study on the Reaction Characteristics of Directional Synthesis of -Terpineol from Turpentine Synthesis and Dispersion Properties of Lower Salt Resistance Sulfomethylated Phenol Formaldehyde Resin (LSMP) Study on Thermal Isomerization of Isopimaric Acid Synthesis and Solubilities of 2,6,7-Trioxa-1-Phospha Bicycle [2,2,2] Octane-4-Carboxylic Acid 1-Oxide in Selected Solvents Synthesis and Crystal Structure of the Lead(II) Complex with 5-Hydroxyisophthalic Acid Synthesis and Properties of Rosin-Modified Lignosulfonates The Research on the Crystal Structure of Oxidized Starch by Microwave-Liquid Phase Method The Synthesis and Characterization of New-Style Anticorrosive Pigment Zinc Molybdate Chapter 4: Catalyst, Inhibitors and Reaction A New Route to Synthesis of Titanium Silicalite-1 by Ball-Milling An Experimental Study of Steam Gasification of Biomass over Precalcined Copper Slag Catalysts Catalytic Methoxycarbonylation of 1,6-Hexamethylenediamine with Methyl Carbamate to Dimethylhexane-1,6-Dicarbamate Catalytic Decomposition of CCl2F2 over Solid Base Na2O/ZrO2 Catalytic Degradation of Azo Dye Congo Red in Aqueous Solution by LiMn2O4 Coaled Carbon-Based Solid Acid: a New and Efficient Catalyst for Click Synthesis of 3,4-Dihydropyrimidin-2(1H)-Ones under Solvent-Free Conditions Effect of Alkali Precipitateing Agent on the Activity and Stability of Copper-Manganese Mixed-Oxides for the Water Gas Shift Reaction Effect of Different Aromatic Carboxylic Acid Ligands on the Catalytic Activities of Metal-Organic Frameworks Effect of the Ration of Cu to Mn on the Activity and Stability of Copper-Manganese Mixed-Oxides for the Water Gas Shift Reaction Effects of Alkali and Alkaline Earth Metals on NOx Reduction in Coke Combustion Influence Factors of Denitration Study on Catalyst Mn-Ce/TiO2 Hydrolysis of PNPP Catalyzed by the Dodecyliminodiacetate Nickel(II) Complexes Influence of Synthetic Methods on the Acid Catalytic Activity of NZP Family Compounds Modified by Doping Aluminum Kinetic Study of the Diels-Alder Reaction of Cyclopentadiene with Bis(2-Ethylhexyl) Maleate Kinetics of the Reaction for Generation of Chlorine Dioxide from Sodium Chlorate and Hydrochloric Acid La-ZrO2 and Ru-ZrO2 Promoted Co/SiO2 Catalysts for Fischer-Tropsch Synthesis Lipase-Catalyzed Synthesis of Caffeic Acid Propyl Ester in Ionic Liquid Preparation of Light-Color Rosin and Preliminary Analysis of Decoloration Mechanism Performance of LaBO3/HZSM-5 Catalysts for Eliminating Soot from Diesel Exhaust Removal of Formaldehyde Using Mn-Ce-Fe Oxide Catalyst Preparation and Characterization of Palladium-Gold/4A Zeolite Catalyst Preparation and Performance of Ni2P/TiO2-Al2O3 for Hydrodenitrogenation Progress in Adjustment of Ionic Liquids Acidity Based on the Alkylation Reaction Laws and Macro-Kinetics of 4-Carboxybenzaldehyde Hydrogenation over Pd/TiO2 Catalyst Solvothermal-Derived Nanocrystalline TiO2 Supported Co Catalysts in the Hydrogenation of Carbonmonoxide Studies on the Esterification Synthesis of Alkyl Oleates in Solvent-Free System by Candida Sp. Lipase Synthesis and Hydrodesulfurization Performance of Bulk Ni-Mo-W Catalyst with High Surface Area Synthesis of Polycarbonate Diol Catalyzed by Metal-Organic Framework Based on Zn2+ and Terephthalic Acid The Direct Carboxylation of Terminal Alkynes with Carbon Dioxide Using Copper-Conjugated Microporous Polymer as Catalyst Synthesis of Substituted Phosphotungstic Acids and their Catalytic Performance on Cationic Polymerization of -Pinene Synthesis of Three-Dimensionally Ordered Macroporous Co/SiO2 Catalysts by Sol-Gel Method Vanadium-Chromium Oxide: Effective Catalysts for Ammoxidation of 3-Picoline Catalytic Synthesis of Ethyl Acetate Using Ti2SnC Study on -Pinene Isomerization over MCM-41 Supported SO42-/TiO2 Alcohol Interchange Synthesis of a Novel Titanium Glycolate Esterification of 5-Norbornene-2,3-Dicarboxylic Anhydride under Titanium Catalyst Esterification of Menthol and Lactic Acid by Silicotungstic Acid Catalyst Supported on Bentonite Inhibition Effect of N-Octyl-2-Pyrrolidonium Chloride on the Corrosion of Mild Steel in Acidic Medium Inhibitory Kinetics of Isooctyl 4-Hydroxy-3-Methoxycinnamate on Tyrosinase-Catalyzing Reaction Oligomerization of 1-Butylene to Lubricant Catalyzed by Bis(tetramethyl cyclopentadienyl) Zirconium Dichloride/MAO Preparation of 2-Methyl-1,4-Naphthoquinone(vitamin K3) by Catalytic Oxidation of 2-Methylnaphthalene with Sulfuric Acid as Catalyst Adsorption Property of Cu-BTC for Dibenzothiophene Sulfide Analysis and Operation of Coking Crude Benzene Hydro-Refining Process Decoloration of Azo Dye by Electrodeless Discharge in Water Immobilization and Thermostability Characterization of Cephalosporin C Acylase Corrosion Behavior of API-5L in Various Green Inhibitors Preparation and Catalytic Performance of Ti(SO4)2/ -Al2O3 Catalysts for Oligomerization of 1-Butene Research of Copolymerization Kinetics of CO and C2H4 Catalysed by Palladium Chapter 5: New Energy Development and Energy Chemical Engineering Biodiesel Production from Silkworm Pupae Oil Using Solid Base Catalyst Conversion of Rice Straw to Bio-Fuel by Pyrolysis in Molten KCl-LiCl Chemical Equilibrium Prediction on Release of Na,K,Cl and S-Species during Gasification of Biomass, Soft and Hard Chinese Coal at Elevated Temperature and Pressure by Fact Sage Effect of Macropore Structure on Desorption Diffusion Performance of N-Pentane on 5A Zeolite Effect of Secondary Pore Distribution on Adsorption Rate and Stability of Molding 5A Zeolite Experimental Study on SO2 and NOx Removal during Briquette Combustion Adsorption CO2 on Activated Carbon with Surface Modification Effects of Extraction on the Desulfurization of FCC Diesel by Ultrasound Oxidation Technique Evaluation of the Role of Surfactant on the Surface Characterisation of Coal Experimental Research on Molding Biomass's Carbonization Homogeneity Facile Preparation of Biodiesel Using Microwave Heating New Mechanism of Saving Energy and Reducing Pollution in Burning Processing of Emulsified Oil Investigation of Vanadium Containing Shale in Combustion Behavior KF/Al2O3/Ceramic Membrane Catalyst for Biodiesel Production Optimization of Compressed Air Energy Storage System Parameters Optimization Study of Pyrolysis Process for Bamboo Waste by Orthogonal Experiment Reactors Used for Catalytic Combustion of Methane Logistics Management of Bio-Diesel Chapter 5: New Energy Development and Energy Chemical Engineering Simulation Research on the Coke-Oven Gas Pressurized Desulfurization Process Research on the Fitting and Predicting Models for Coal Bed Methane Dynamic Productivity of Coal Mine Area Study on Coking during the Pyrolysis of Coal to Acetylene in the Plasma Strategy for Renewable Energy Development in Rural Areas of Beijing Simulation of Chlorobenzene Distillation Using Dividing Wall Column Study on the Preparation of Higher Alcohols Using Blast Furnace Gas and Coke Oven Gas The Influence of Injection Timing on Emissions Characteristics of a DI Diesel Engine Fuelled with Pistacia Chinensis Bunge Seed Biodiesel The Influence of Extraction on the Thermal Performance of Coal in Inner Mongolia Research on Fuel Migration Phenomenon in the Sintering Process Non-Thermal Plasma and Catalyst System for Simultaneously Oxidizing SO2 and NOx Esterification of Oleic Acid with Methanol Catalyzed by P-Toluene Sulphonic Acid/MCM-41 Hydrolysis of Cellulose to Produce Glucose in Ionic Liquid-Water Mixtures Chapter 6: Biological Chemistry, Pharmaceutical, Medicine and Biomedical Engineering A Novel Biomaterial from Acrylamide Graft on NaOH-Urea Modified Rice Husk Bone Distribution Simulation during Damage-Repair Bone Remodeling in Human Proximal Femur Characteristic and Molecular Research of Glycerol Dehydratase Chemoenzymatic Epoxidation of -Pinene Catalyzed by Novozym 435 Chemical Constituents and Anti-Acetylcholinesterase Activities of Dolomiaea wardii Chemical Constituents of Euphorbia altotibetica Causes and Removal of Daemonorops margaritae Cane's Discoloration Characterization of Magnetic Cellulose Microspheres Reconstituted from Ionic Liquid Crystal Structure, Antimicrobial Activity and Oxidation Resistance of N,N'-Bis(4-hydroxybenzyidene)azine Design, Syntheses and Biological Evaluation of 3-Arylurea-5-Fluoroindolin-2-One Derivatives Design, Syntheses and Biological Evaluation of 5-Fluoroindolin-2-One Derivatives with Urea Linkage Docking Studies on a Series of Novel Potent BRAF Inhibitors Differential Expression of the Dmrt1 Gene from Ovaries of Diploid and Triploid Rainbow Trout (Oncorhynchus mykiss) Dynamic Absorption and Desorption Properties of HPD722 Macroporous Resin for Flavonoids in Emilia sonchifolia Extract Effect of Formula on Microcellular Unsaturated Polyester Effect of Sodium Ion on Flame Retardance and Thermal Degradation of Cellulose Fiber Effect of Silane Coupling Agent on the Self-Cleaning Property of TiO2-Coated Cotton Fabrics Expressing Xylanases in Escherichia Coli by Cell Surface Display Excellent Preparation of Azetidin-3-Ones from Propargylic Alcohols by Gold-Catalysis Extraction of Hemicellulose from Sugarcane Bagasse under Microwave Radiation Kinetic Models of Hydrogen Production Process by Batch Anaerobic Fermentation from Contained Sugar Wastewater Immobilization of Lipase on MCM-41 Nanospheres: Exploring the Effects of Supports Morphology on the Lipase Immobilization Limit Test of Aristolochic Acid a in YishenJuanbi Pill Improved Corrosion Resistance of NiTi Alloy by Coated with TiO2-SiO2-HAP Composite Films Matrine Determination in Compound Sophora Alopecuroides Suppositories by High-Performance Liquid Chromatography Inhibition of Serum PON Arylesterase Activity by Different Inhibitors and Correlation Analysis New -Glucosidase Inhibitory Polysaccharides Isolated from Marine Green Algae Enteromorpha Linza Optimization of the Water Extraction Technology of Flavonoids in Emilia Sonchifolia (Linn.) DC Liquid-Liquid Equilibria for Linalool in Aqueous Alcohol Mixtures Modification of Activated Carbon and its Application on Adsorption of UDMH Gas Optimization of Riboflavin Production by Recombinant Bacillus Subtilis X42 Using Statistical Designs Preparation and Properties of DCP-Crosslinked Biobased Polyamide Photo-Degradation of Cypermethrin in Aqueous Solution Studied by HPLC-DAD Research on the Extraction of Dendranthema Morifolium Volatile Oils by Microwave-Assisted Steam Distillation Extraction Research on Active Selenium Polysaccharide in Artemisia Argyi Spectroscopic Investigation of the Interaction between Rutin-Ce and Lysozyme Spectroscopic Studies on the Binding Properties of Ofloxacin and Human Telomeric G-Quadruplex DNA Study on Extraction of Natural Black Soya Bean Peptide and Antioxidant Activity Study on Limonium aureum Endophytic Fungi and its Antibacterial Activity Study of a upp-Based Counterselective Method for Large-Scale Deletion of Genome Fragments in Bacillus subtilis Study on the Physical and Chemical and Mechanical Pulping Characteristic of Tobacco Stalk Fiber Study on the Thermodynamic Properties of Two Anti-Cancer Drugs Study on Preparation of Abamectin Microcapsule with Interfacial Polymerization Study on Synthesis of (s)-3-(t-Butyldimethylsilyloxy)-7,7-Dichloro-2,2-Dimethyloctanoic Acid Study on Synthesis of 2-(1-Tert-Butoxycarbonylamino-2-Methyl-Butyl)-Thiazole-4-Carboxylic Acid Methyl Ester Study on Synthesis of 2,2-Dimethyl-3-Hydroxy-7-Octynoic Acid Study on Synthesis of N-Methyldipeptide N-Ns-N(Me)-L-Ala-N(Me)-L-lle-OtBu Synthesis and Anti-HIV Integrase Inhibitory Activity of -Diketo Derivatives of Mono-Substituted Calix[4]arene Synthesis and Biological Evaluation of Quinolone Acid Derivatives Having Polyhydroxylated Aromatics as HIV-1 Integrase Inhibitions The Application of Silk Fibroin in Tissue Engineering and Drug Carrier Area The Preparation and Research of the Aerogel-Type Wood Composite Material The Effect of KHCO3 on Photosynthesis of Eggplant Seedlings Synthesis and In Vitro Anti-Breast Cancer Activity of Trametenolic Acid B Derivatives Utilization of Agro-Waste A. galanga Natural Fibers in Composites Synthesis of N/Al Doped TiO2 Mesoporous Nanomaterials with Pyridine as a Template Synthesis of Ropivacaine under Ultrasound Irradiation The Application of Ultrasonic Instead of Sulfur Dioxide in Processing of Strawberry Wine Ultrasonication-Induced Rapid Gelation of Wild Silkworm Silk Fibroins The Influences of Aerobic and Anaerobic Conditions on PHB and Glycerin Yields in the Process of Lignin Degradation by Pseudomonas stutzeri P156 The Study of Eleutheroside on Immunological Function of Aging Rats Isolation and Identification of Bacillus from Spontaneous Fermented Sufu Synthesis and Fungicidal Activity of Novel N-Nitro-2-Pyrimidinamine Derivatives Synthesis and H+/K+-ATPase Inhibitory Activity of 2-Phenyl-6,7-Dihydrobenzofuran-4(5H)-one Oxime Ether Derivatives Thermodynamical Study on Rare Earth L-Isoleucine Chlorate Complexes [RE2(lle)4(H2O)8](ClO4)6 (RE = Nd, Er) A New Approach for the Synthesis of 6,7-Dihydro-5H-Cyclopenta[b]pyridine Synthesis and Characterization of 4-(3'-Chlorophenylamino)-6-Methoxy Quinazoline Derivatives The Effect by Sodium Sulfite on the Enzyme Activity and Stabilization of Race Bran Bioassay-Guided Isolation and Identification of a Acetylcholinesterase Inhibitors from Calophyllum polyanthum Effect of Vaccinium dunalianum Glycoside on Platelet Aggregation in Animals Extraction, Purification and Characterization of Polysaccharides from Clam (Ruditapes philippinarum) Isolation and Purification of Aloin a and Aloin B by High-Speed Counter-Current Chromatography Hijiki Seaweed (Hizikia fusiformis): Nutritional Value, Safety Concern and Arsenic Removal Method Isolation and Identification of Thermostable Lactase-Producing Bacillus coagulans T242 Optimization of Culture Medium and Conditions for Bacillus coagulans T242 Producing Thermostable Lactase Muscle Fiber Types, Characteristics and Meat Quality Nanofibril Formation of Whey Protein Concentrate and their Properties of Fibril Dispersions Optimized Ultrasonic-Assisted Extraction by Using Response Surface Methodology and Structural Analysis of Flavonoids from Alliums cepa L. var. agrogatum Don Process Study on the Ultrasonic Assisted Enzymatic Extraction of Flavonoids from Shepherd's Purse Rapid Spectrophotometric Determination of Hypothermia Protection Activity of Sericin Peptides on Lactobacillus bulgaricus Study on Antioxidant Activities of Pinus armandi franch Seed Oil Ultrasonic Extraction of Phenolics from Longan Seed by Response Surface Methodology Hemagglutination Characterization of Lectins from Four Traditional Chinese Medicines Expression of Recombinant Human Cytomegalovirus Fusion Proteins pp150-pp65 Fragments and its Application Effects of Potential Enviromental Pollutant Acaricide Fenpyroximate on Juvenile Turbot (Scophthalmus Maximus) L-Citrulline Protects against Rhabdomyolysis -Induced Acute Renal Failure in Rats Optimization of Preparation Technology on Medicated Serum of Yinqiaotiangan in Mice A Study of Amplifying Ovarian Cancer Biomarkers Concentration by an Ultrasonic Device Application of Data Mining Technology on Analyzing a Series of Biomarkers for Diagnosis of Bone Metastasis from Different Cancers Optimization of the Fusion Expression of Chicken -Defensin Gal-3 in E Coli Preparation of Magnetic Chitosan Hyamine Microspheres and Separation of Phenolic Acids from Rubus Chingii Hu Sleep Electroencephalogram Analysis Based on Average Energy Dissipation Protective Effect of Nitric Oxide Pathway in L-Citrulline Renal Ischemia-Reperfusion Injury in Rats Study on the Preparation of Stigma Maydis Polysaccharide Oral Liquid Studies on Transformation of Alfalfa with Chicken -Defensin Gal-3 Study on N-(pyridin-4-Yl) Salicylamides as Antimycobacterial Agents Synthesis and Antibacterial Activity of some New Quinoxaline-1,4-Dioxide Derivatives The Interaction of Cytotoxic Sm (III) Complex of Plumbagin with Bovine Serum Albumin The MRTF Induced the Migration of Colon Cancer HT-29 Cell Recent Advances of Application of Capillary Electrophoresis in Traditional Chinese Medicine Analysis Research of the Three-Phase PV Power Grid Inverter Based on PR Control Used in Biomedicine Study on the Preparation of Activated Carbon from Corncobs Chapter 7: Food Chemistry and Industry Absorbability of Active Carbon Influencing the Haze in Clarified Apple Juice An Absorption Assessment of Eggshell Calcium Citrate Treated by PEF in Mice Antimicrobial and Antioxidant Activities of Deer Blood Hydrolysate on Fresh Beef during Refrigerated Storage Anti-Oxidant Activity of Anthocyanins of Black Soybean In Vitro Applications of Ultrafiltration-Nanofiltration Membrane Continuous Combination Technology for Refining of Milk-Derived Oligosaccharides Antioxidant Properties of Deer Blood Hydrolysate and the Possible Mode of Action Effect of Dense Phase Carbon Dioxide on Inactivation of Polyphenol Oxidase and Peroxidase in Hami Melon Juice Effects of Acid Hydrolysis and Annealing Treatment on the Physicochemical Properties of Mung Bean Starch Effect of Germination on Physicochemical Properties of Tartary Buckwheat Starch Effect of High Temperature Pretreatment and Gaseous Ozone on Storage Quality and Microbiological Safety in Fresh Ginger (Zingiber officinale Rosc.) Effect of Processing on the Secondary Haze Formation in Clarified Apple Juice Effect of Ultrasonic Wave on the Physical Properties of Cassava Starch Effects of Different Cooking Methods on Nutritional Characteristics of Boletus aereus Fermentation Process Optimization of Mulberry Black Tea by RSM HPLC Analysis of Flavonoids Compounds of Purple, Normal Barley Grain Mixed Bacterial and Physico-Chemical Index of Changes in Sausage Fermentation Process Optimization of Ultrasonic Extraction of Total Flavonoids from Litchi (Litchi chinensis Sonn.) Seed by Response Surface Methodology Preparative Separation and Purification of Lancifodilactone C from Schisandra Chinensis (Turcz.) Baill by High-Speed Counter-Current Chromatography Research on Distribution Management System Oriented Food Industry Research of Preparation Factors on Magnetic Cassava Starch Microspheres Studies of Rice Flour Gelation in the Processing of Rice Noodles Recovery of Sweet Potato Protein Materials from the Starch Waste Rheological Properties of Fresh Jujube Pulp Study on Application of Oat Flour in Quick-Frozen Dumpling Production Studies on the Quality Change of Cloudy Jujube Juice during Storage Studies on the Aqueous Extraction Method of Sesame Oil Study on Enzymatic Fermentation of Fish Sauce by Eel Heads Study on Ultrasonic Assisted - Precipitation Method Combined Purification of Tea Saponin The Effect of Different Washing Treatments on grass carp Surimi Volatile Analysis of Maca (Lepidium meyenii Walp.) by TCT-GC/MS DNA Fingerprint and Determination of Functional Components for Rice with Diabetes Prevention Heavy Metal Concentrations in Canned Fruits of Litchi chinensis, Prunus persica, and Ananas comosus Marketed in the Philippines Optimization of Culture Media and ITS Identification of Tricholoma matsutake Quantitative Analysis of Lead, Cadmium and Chromium in Different Brands of Junk Food Marketed in Metro Manila, Philippines Simultaneous Determination of Four Herbicide and Pesticide Residues in Chinese Green Tea Using QuEChERS Purification Procedure and UPLC-MS/MS Analysis Microwave-Assisted Extraction of Capsaicin from Chili Pepper Powder Chapter 8: Chemical Machinery, Equipment, Chemical Manufacturing Processing Analysis and Study of the Structural Characteristics of Ultrafine Stirred Mill Effects of Dimensions on the Fluid Flow and Mass Transfer Characteristics in Wavy-Walled Tubes for Steady Flow Explosion Simulation for Petrochemical Plant with Water Spray Experimental Investigation on Prestress during the Manufactural Process of Integrated Multilayer Wrapped Vessel Research of Crushing Mechanism Based on Pulverized Coal Sample Preparation System Research on PLC Based Pulverized Coal Sample Preparation Transfer Mechanize Research on the Relational Model of Corrosion Factors of Air Cooler on Atmospheric Tower Study on Coking Mechanism during the Pyrolysis of Coal to Acetylene in the Plasma Study on Reaction Mechanism during the Pyrolysis of Coal to Acetylene in the Plasma Study on Fluid-Flow Characteristics of a New Type Efficient Uniform-Flow Packed Equipment Chapter 8: Chemical Machinery, Equipment, Chemical Manufacturing Processing The Analysis and Detection Research of Different Coal Samples Based on near Infrared Spectroscopy Three Dimensional Numerical Simulation of Solid-Liquid Separation of Horizontal Spiral Sedimentation Centrifuge The Experimental Study on Performance of Single Screw Expander with Air as Working Fluid Material Choice of Rotating Seal Joint of the Device Yellow Phosphorus Extraction from Phosphorus Sludge at Moderate Temperature The Influence of Different Stirring Methods on Crystallization Process of Ammonium Persulfate Cause Analysis of Plate Pitting Corrosion in Lubricating Oil Cooler of Main Equipment in Datang Weihe Thermal Power Plant Chapter 9: Non-Ferrous Metal Material, Steel and Alloys Technology Air and Wet Air Oxidation of 9Cr-3Co-3W Creep Resistant Ferritic Steel at 650 DegreesC Effect of Casting Temperature on the Microstructure of Al-Zn-Mg-Cu Aluminium Alloy Billets Prepared by LFEC Process Effect of Ag Addition on the Microstructure and Properties of Cu-5Cr Base Alloys Effect of Rare Elements on Corrosion Behavior of SPCC in CSP Effect of Austenite Transition under Pulsating Magnetism Effect of Vanadium on Delayed Fracture Resistance of High Strength Pre-Stressed Concrete Steel Bar Effect of Process Temperature on the Microstructure and Properties of Low-Temperature Gas Multi-Component Thermochemical Treatment 45CrMoV Alloy Steel Effect of the Current Density on Oxygen Overpotential and Corrosion Rate of the Al/Pb-Ag-Co Anodes for Zinc Electrowinning Effect of Titanium on the Partition Behavior of Alloying Elements in Single Crystal Superalloys Containing Rhenium Effects of Rolling Temperature on Through-Thickness Deformation and Recrystallization Textures in Heavily Rolled Silicon Steel Effects of Extrusion Methods and Powder Carriers on Powder Forming and Precursor Foaming Behavior in the Preparation Process of Aluminum Foam Hot Deformation Behavior of Al-Zn-Mg-Zr Alloy with Trace Amounts of Sc High-Cycle Fatigue Fracture Behavior of Microalloyed Bainitic Steels for Hot Forging Optimization of Liquid Steel Flow in an Industrial Tundish Phase Transformation of P91 Steels upon Cooling after Short Term Overheating above Ac1 and Ac3 Temperature Research on the Process of High Silicon Aluminum Alloy in MEDM Preparation of ITO Target by Molecular Dynamics Simulation with Normal Pressure Sintering Method Studies on the Influence of Ti on Mechanical Properties in A356 Alloy Simulation of Dynamic Recrystallization for Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Alloy in Processed Using Cellular Automaton Research on Band Microstructure and Annealing Process of CrMo Steel Used for Precision Ball Screw Simulation of Machining of Incoloy 907 with Thermodynamical Constitutive Equation Solidification Characteristics of Al-1Fe-0.5Si-XMg Die-Casting Alloys for High Conductivity Demanding Applications The Divorce Eutectoid Transformation in the Higher Mn Bearing Steel The Research on the Deoxidization Process of Calcium Based Deoxidizer The Study on the Fabrication of Nano-Structured Steel by Cold Rolling and Annealing of Martensite The Lab Research on EH40 High Strength Shipbuilding Steel First-Principles Calculations for Electrical Proterties of the Lead Anode Plate Determination of the Content of Ultra-Low Sulphur in PM Superalloy FGH96 by Infrared Carbon-Sulphur Detector Phase Diagram Simulation and Investigation of Microstructure of Ni-Based Alloys Stability of Phase in Ti Alloys Containing Al or Zr from First-Principles Calculations Mechanical Properties Research of Anionic Polymerized PA6/ABS Alloy Cluster Structures and Evolution in Liquid Al-Pb Alloys Interfacial Microstructure Investigation of Diffusion Bonded New Ni-Cr-W Superalloy Using Cu Interlayer Tandem Extraction of Gold (I) from Cyanide Leaching Solution by Weak-Strong Alkaline Anion Exchange Fiber Research on MRT3-BA Steel in Macro Inclusions Study of Large Inclusions in Casting Slab of 45# Steel Study of Micro-Inclusion of 20g Steel Study of Micro-Inclusion of Grade 45 Steel Study on the Large Inclusions in 20g Steel Chapter 10: Composites and Technology A Series of Metal Molybdates as Flame-Retardants and Smoke Suppressants for Flexible PVC A Review on R&D Status and Application of Fly Ash Cenospheres in Microwave Absorption Application of POD Projection to Orientation Optimization of Laminated Composite Design Curing Reaction Kinetics of Epoxy/MWCNT-P Composites Dielectric and Infrared Properties of Plasma Sprayed Nano -SiC/ Al2O3 Agglomerate Composite Absorbing Coatings Effect of Compositions of Penetrating Agents on the Microstructure of Tungsten-Chromium Surface Composite Effects of Compound Additives on Properties of Cermet Inert Anodes Fabrication of Continuous Nickel-Coated Carbon Fiber Reinforced Aluminum Matrix Composites Using Low Gas Pressure Infiltration Method Effects of Different Size and Shaped Magnesium Particles on the Properties for Fuel Rich Solid Propellant Facile Fabrication of Superhydrophobic Surface via SiO2/Fluoro-Containing Polymer Composite Particles Flame Retardant Epoxy Resin Containing Magnesium Phosphinate Interfacial Debonding Force and Shear Strength of Sugar Palm (Arenga pinnata) Fiber Reinforced Composites by Pull-Out Test Porous Sepiolite/Starch Composites:Preparation, Structure and Absorption Properties Preparation and Application of Inorganic Nanoparticle-Polymer Composites Preparation and Characterization of PA 6/EPT Blends Preparation and Characterization of SiO2-PMMA with Different Shell Thickness Using AGET ATRP Preparation and Properties of Glycerol Plasticized Starch/ Sepiolites Composites Photoluminescence of Y2O3:Eu3+ Prepared by the Wood Template Preparation and Water Absorbency of Superabsorbent Kaolin/PAA-AM Composite Preparation and Characterization of Graft Copolymer of Acryloyloxyethyl-Trimethylammonium Chloride and Starch Preparation and Electrochemical Properties of Poly(p-Chloroaniline) Preparation of OMMT and Light-Colored and Transparent PI/OMMT Hybrid Composite Films Preparation of SiC Powders by Utilizing Rice Husk Ash from Biomass Cogeneration Plant Research on Explosive Compaction Technology and Properties of WC/Cu Composites Research on Flexible Resin's Effect for Composite T-Joint Progress in Catalytic Preparation of Carbon/Carbon Composites Research on the Adsorption Abilities and Mechanism of the Grafted Composite Adsorption Material PEI/SiO2 towards p-Nitrophenol Studies on Influencing Factors of Polyketone Molecular Weight by Palladium Catalyzed Alternating Copolymerization with Carbon Monoxide and Ethylene Research Progress of Synthetizing Polydichlorophazene Study on Anti-Aging Performance of Composite Materials of PP-G-an /PP /SiO2 Research of Interface of Carbon Fiber Reinforced PA6 by In-Situ Anionic Polymerization Research of Penetration Model for Carbon Fiber Reinforced Nylon Composite Material Study on Crystallinity of Carbon Fiber Reinforced Nylon 6 Interface by In-Situ Anionic Polymerization Study on Production Technique of the Metal Reinforced Polyethylene Spiral Corrugated Pipe Study on Synthesis of 2-Hydroxy-6-Naphthoic Acid from 2-Naphthol and Improve the Synthetic Process Synthesis Star-Shaped Cationic Polyacrylamide- Dimethyl- Diallyl- Ammonium- Chloride by "Core-First" Method Study on Thermal Conductivity of Metal/Polymer Composites Based on Software ANSYS The Effect of Addition of Multi Wall Carbon Nano Tubes (MWCNT) Reinforcement to the Characteristics of Carbon Composite Bipolar Plate Synthesis,Characterization and Flocculability of a Poly (p-Ethylstyrene -Acrylamide- Propenohydroxamic Acid) Synthesis and Characterization of Cellulose Acetate Blend Ultrafiltration Membranes: The Effect of Degrees of Substitution Synthesis of a Cellulose-Magnetic Nanocomposite in Ionic Liquid The Residual Bending Properties after Impact of CFRP Laminates with Voids The Residual Tensile Properties after Impact of CFRP with Different Porosities The Analyses of Glass-Reinforced Plastic Pipeline Failures and Possible Solutions The Application of Fiber Reinforced Concrete in Cement Concrete Pavement Water Absorbency Study of the Low-Cost Composite--Eupatorium adenophorum-Graft-Acrylic Acid/Acrylamide Water Resistance Research of Anionic Polymerized PA6/ABS Alloy The Synthesis of Porous TiC-TiB2-NiAl Composites by SHS Determination of Rare-Earth Elements in Titanium Matrix Composites by ICP-AES Preparation and Characterization of Expandable Graphite Decorated with Rare Earth Nanoparticles CeO2 Chapter 11: Micro/Nano Materials and Preparation Technology Characterization of Nano TiO2 Modified Fabrics Characterization of Nanoscale Precipitates in 10Ni3MnCuAl Steel by Three Dimensional Atom Probe Tomography Development of Preparation of Boron Nitride Nanotubes Droplet Size and Shape in a Flow-Focusing Microdevice Effect of Calcinations on Characterizations of Fabricated Nano Manganese Ferrite Electrochemical Performance of Iron and Cobalt Tetrapyrazinoporphyrazines Supported on Multiwalled Carbon Nanotubes Effect of Temperature and Synthesis of CuO Nanostructures on Cu Plate by Thermal Method Effect of Temperature and Synthesis of ZnO Nanostructures on Zn Plate by Thermal Method Effect of Temperature on Preparation of Ammonium Polyphosphate Effects of Activation Conditions on Preparation of Coal Tar Pitch Based Mesoporous Activated Carbon Using Template and KOH Activation Method Effect of Wet Ammonia on Crystalline Forms of Ammonium Polyphosphate Fabrication of V-Doped TiO2 Nanoparticles and Photocatalytic Studies under Visible Light Fast Synthesis of High-Silica ZSM-5 Zeolite via a Simple Vapor-Phase Transport Method Effects of Surfactant Concentration on the Microstructures of TiO2 Hollow Spheres by Hydrothermal Method Enhanced Microwave Absorption by Incorporating Fe3O4 Nanoparticles into Ordered Mesoporous Carbon Facile Solvothermal Method to Synthesis Eu Doped TiO2 Hollow Microspheres with Enhanced Photoluminescence Hydrothermal Synthesis of EuF3 Nanorods Hydrothermal Synthesis of 3D Flower-Like Bismuth Trisulphide Microcrystallines Nanocrystalline TiO2 Powder Materials Anticipates at Disinfect the Appliance in the Beaded Paint Nanostructural Characteristics and Electrical Conductivity of Copper Nanoparticles-Polypropylene Nanocomposites for Bipolar Plate Application Preparation and Optical Properties of CuS Nanochains by a Solvothermal Method Rapid Synthesis of Non-Crosslinked and Monodisperse Polystyrene Microspheres PH Dependence of the Size and Shape of the Gold Nanoparticles Prepared by Macromolecules Preparation and Properties of Optically Transparent Chitin Nanofibers Sheet by Different Simple Mechanical Methods Preparation and Research of Coupling Agent Modified Organophilic Montmorillonite Preparation of Core-Shell Microspheres by Changing Reaction Solvent Preparation of Superfine Aluminum Hydroxide Fine Powder by Spontaneous Nucleation Preparation and Magnetic Properties of La Substituted Barium Ferrites Synthesized by the Oxide one Pot Synthesis (OOPS) Process Study on the Condition of Preparation of Magnet Activated Carbon by Pyrolytic Process Structural and Photocatalytic Properties of CuO Nanorods Using the Hydrothermal Treatment Method Structural and Photocatalytic Properties of Fe-Dope TiO2 Nanostructure Using the Hydrothermal Treatment Method Study on Crystalline Transformation in Preparation of Ammonium Polyphosphate Synthesis and Luminescence Properties of YVO4:Eu 3+ Nanocrystals by a Sol-Gel Method Synthesis and Photocatalytic Activity of Rod-Shaped Mesoporous TiO2 Using Poly (ethylene glycol) as Templates Synthesis of Monodispersed Fe3O4 Magnetite Nanoparticles by Ethylene Glycol Solvothermal Method Synthesis of the Mesoporous Silica with Different Morphological Structure by Modifying the Solution Conditions The Application of Sodium Citrate in Co3O4 Nano-Particle Dispersing System The Effect of Alcoholic Reducing Agent and CTAB on Morphology and Structure of VO2 (M) Nano-Particles Synthesis of Novel Carbon Spheres and Study on Graphitization Process Synthesis of TiOF2 Ball-Flowers and the Phase Transitions to TiO2 Synthesis and Characterization of Barium Strontium Titanate Nanocrystalline Powders Prepared by Direct Reactive Precipitation Method from Solution Thermal Stability of MWCNTs Reinforced Nanocomposites Synthesis of TiO2 Nanostructure by DC Reactive Magnetron Sputtering and Hydrothermal Technique Synthesis, Properties and Applications of Polymer-Grafted SrAl2O4: Eu2+, Dy3+ Ultrasound-Assisted one-Pot Synthesis of Dispersable Nano-MnO2 in the Presence of Nanocellulose Exploration of the Structures of the Magnetically Induced Self-Assembly Photonic Crystals in a Solidified Polymer Matrix Study on Preparation of 1H,1H,2H-Heptadecafluorodecene Preparation and Characterization of PVA-MSA/mCS Bipolar Membrane Chapter 12: Ceramic, Refractory and Strong Materials Dielectric, Piezoelectric and Ferroelectric Properties of (1-x)K0.5Na0.5NbO3-xBiGaO3 Lead-Free Ceramics Effect of Different Sintering Additives on the Reaction-Bonded Si3N4/SiC Composite Ceramics Effects of Sintering Temperature on Microstructure and Phase Formation of Nitrides Bonded MgAl2O4-Crefractory Influence of Silicon Nitride on Properties of Corundum Based Castable Influence of Na2CO3 on Hydration Resistance of MgO-Al-C Bricks Study on Effect of Sintering Pressure on the Properties of Diamond Bit Synthesis and Application of Titanium Carbonitride The Influence of AST Doping on the Dielectric Properties of MgTiO3-Based Ceramics Fabricated by Soild-State Sintering Synthesis of Al8B4C7 from Aluminum, Boron Trioxide and Activated Carbon Mixed Powders Synthesis of MgAl2O4-SiAlON Composite Powders by Carbothermal Nitritdation of Forsterite and Alumina Wear Mechanism and Self Lubrication of Engineering Ceramics at Elevated Temperatures The Influence of B4C on Mechanical Properties of MgO-SiC Based Refractory Castables Preparation of Zirconium Titanate Ceramics by Alloy Oxidation Method Effect of CNTs Content on Properties of AlN-CNTs Composite Ceramic Research on the Effect of Holding Time on Diamond Drill Bit Performance Effect of Additive on Phase Composition and Microstructure of Silica Brick Matrix Chapter 13: Optical/Electronic/Magnetic, New Functional and Energy Materials Analytical Solutions for Laminated Transversely Isotropic Magnetoelectroelastic Plates Anisotropy in Third-Order Nonlinear Optical Susceptibility of the Stretch-Oriented Chrysophenine-Doped Poly(vinyl alcohol) Films Calculation of the Interaction Forces between Superconductor and Permanent Magnet Using Equivalent Current Loops in Zero Field Cooling Artificial-Neural-Network Prediction of Device Behaviors in Submicron MOS Transistors Charge Programming and Erasing Characteristics of the Submicron Stacked-Gate Flash Cells Effect of Ca Doping on Crystal Structure of the Misfit-Layered Bi-Sr-Co-O Thermoelectric Materials Effects of Surfactants on Particle Size and Luminescence Properties of Ca1.98MgSiO5:Eu2+0.02 Phosphor Prepared by Sol-Gel Method Effects of Annealing in Air on Structure and Properties of Al Films Prepared by Thermal Evaporation Fluorescence Enhancement of Europium(III) Perchlorate by 2,2'-Dipyridyl on Bis(benzylsulfinyl)methane Complex Fluorescence Enhancement of Europium(III) Perchlorate by Salicylic Acid on Phenyl-Naphthoylmethyl Sulfoxide Complex and Luminescence Mechanism Growth and Characterization of CdZnTe Bulk Crystals Grown by Temperature Gradient Solution Growth Fabrication of Microcrystalline Cellulose/CdS Nanocomposites and their Photocatalytic Properties Luminescent Properties of a Novel Red-Emitting Phosphor Ca1.95P2O7:0.05Eu3+, B3+, M+ (M=Li, Na, K) for White Light-Emitting Diodes Impact of the Oxygen Content on the Electronic Properties in Epitaxial Thin Films of Electron-Doped La0.9Hf0.1MnO3 Manganese K- and L3-Edge X-Ray Absorption Fine Structure Study of Zn1-xMnxTe Photoluminescence and Afterglow Behavior of Eu2+, Dy3+ and Eu2+, Sm3+ in Sr3Al2O6 Matrix Photoluminescence Properties of Sulfur-Doped Sr3SiO5: Eu2+ Phosphor for White LEDs Preparation, Characterization of Low Infrared Emissivity Stealth Coating Strong Perpendicular Magnetic Anisotropy with High Thermal Stability in Annealed Co/Native Oxide/Pd Multilayers The Effect of Oxygen-Rich Condition on Properties of ZnO: In Films by Sputtering Theoretical Studies of the Spin Hamiltonian Parameters for Fe0 and Mn- in Silicon Center The Influence of 4,4'-bis[6-(acryloyloxy)-hexyloxy]biphenyl Contents on the Electro-Optical Properties of Polymer Stabilized Liquid Crystals Studies on the Properties of LiFePO4 -C/Li Batteries Doped Carbon by Vapor Deposition First-Principles Study on Energy Property and Stability of Y3Al5O12 Crystal Theoretical Study on Au-Doped Ge Semiconductor Clusters Electropolymerization and Electrochromism Properties of Poly(m-trifluoromethylaniline) First-Principle Study of Structural and Electronic Properties of Ti-Doped SnO2 Preparation of La0.9SR0.1Ga0.8Mg0.2O3- Electrolyte Films Deposited by RF Magnetic Sputtering Study on Electronic Structure of the Ti Ion Implantation Al2O3 (0001) Surface by First Principles Comparative Investigation of Optical Properties in Tm3+/Er3+/Yb3+ Co-Doped Oxyfluoride Tellurite and Germanate Glasses Influence of Aging Treatments on the Microstructure Evolution in Mg-8.8Hg-8Ga (wt%) Alloys Study on the Dielectric Properties of Biomass Material of Tobacco Stems The Durability of Water and Oil Repellent Finishing of Cotton Fabrics with Isocyanate The Effect of Polymethyl Methacrylate(PMMA)for the Fabrication of Polyacrylonitrile (PAN) Fiber Method of Preparation Magnesium-Based Alloy Film and its Hydrogen Storage Performance Synthesis and Crystal Structure of a Fe(II,III) Complex with 2-(4 -Chlorine-benzoyl)-benzoic acid and 3-(2-Pyridyl)pyrazole Electrochemical Properties of GaCl3 in Ionic Liquid [C2mim][GaCl4] Hydrothermal Synthesis and Crystal Structure of a Cadmium Complex A Design for the Large-Angle and Wide Wavelength Antireflective of Film Thermal Effects Caused by Inclusions in Optical Films Irradiated by CW Laser Study on the Synthesis CMCAB Electro Spinning Carbon-Coated LiFePO4 Anode Materials Synthesis of LiMn0.7Fe0.3PO4/C Composite Cathode Materials for Lithium-Ion Batteries The Side-Chain Effects on Photovoltaic Properties of Copolymers Based on Phenothiazine and Thiophene Design and Fabrication of SiO2 Coated Al Thin Films with High Performance for Solar Front Reflectors Synthesis and Application of Novel D- -A Porphyrin Dyes in Dye-Sensitized Solar Cells Supercapacitive Properties of Hydrothermally Synthesized -MnOOH Nanowires Conductive Polymers Based on Phenothiazine-Benzothiadiazole: Synthesis, Characterization of Photovoltaics Chapter 14: Building Materials and Architecture A Kind of New Type Composite Structure Column of Research Application and Practice of Local Materials in the Village Remediation Application and Research Progress on Eco-Cement Development of Green High Performance Concrete Effect of Epoxy Emulsion on the Mechanical Properties and Permeability of Cement Mortar Experiment for the Mix Proportion Design of Green and Self-Compacting C40 Concrete Experimental Study on Size Effect in Strength of Pervious Concrete and its Associated Factor Experimental Study on Compressive Performance of Polyurethane Composite Panel Experimental Research of the Rapid Set Cement Concrete for Rapid Repair of Concrete Pavements Influence of Additives on Modification of Sodium Silicate and its Molding Sand Properties Influence of Granulating Equipment on the Quality of Artificial Aggregate Investigation on Application of Iron Mine Tailing Sand in Building Mortar Influence of Blast Furnace Slag on the Mechanical Properties of High Performance Concrete Relationship between Mineral Characteristics and Frictional Property of Pavement Stones Research on Evaluation Index of Water Stability for Asphalt Mixtures Road Performance of Asphalt Binder Modified with Natural Rock Asphalt Studies on the Sorption of N2 and CO2 over Hardened Cement Paste Research Progress on Early Autogenous Shrinkage of Cement-Based Cementitious Materials Size Effect on Compressive Strength and Modulus of Elasticity in High Performance Concrete The Structural Performance of Precast Lightweight Foam Concrete Sandwich Panel with Single and Double Shear Truss Connectors Subjected to Axial Load The Study of the Axial Compressive Bearing Capacity of Core Column with High Strength Concrete Filled Steel Tube Based on the Twin Shear Unified Strength Theory A Brief Discussion on Settlement Pattern of Ancient Village in Jiajiazhuang Analysis on the Decoration of Traditional Dwellings in Shanxi Province - Taking Dwellings in Ding Village of Xiangfen County as an Example Analysis on the Urban Space Design of Small and Medium-Sized City at both Banks of Waterfront - Take Urban Space Design of the City at both Banks of Waterfront at Heshun County Town as Example Dynamic Characteristics of Steel Stay Cable in Civil Engineering Using Field Testing Investigation of the Pozzolanic Reaction in Silica Fume-Cement Paste by 29Si MAS NMR Chapter 15: Mechanical Behavior & Fracture A Finite Cylindrical Cavity Expansion and Penetration Model of Exponential Strain-Hardening Materials Approximate Elastodynamic Directional-Cloak with Isotropous Homogeneous Material Comparison of Rheological Behavior of Three Gel-Type Vehicles for Printing Ink Failure Analysis of Pin Joint of Carbon/Epoxy Composite Plate Effects of Current Stressing and Isothermal Aging on the Tensile Strength of Microscale Lead-Free Solder Joints with Different Joint Volumes Fracture Analysis of GCr15 Steel Ball Screw Nut Impact of Metallic Foam's Microstructure to its Mechanical Property Constitutive Modeling of Mechanical Behavior of Metallic Materials with Nanocrystalline Surface Layer The Simulation Analysis of Tension Leveling for Improving the Shape Defects of Strip Chapter 16: Material Forming, Machining and Joining, Testing and Evolution Effect of Die Forms on Rivet Deformation and Microstructure Effect of Machining Parameters on Surface Integrity in Dry Turning of Inconel 718 Experimental Investigations and Finite-Element Modeling of Thermoplastic Effect during Tensile Tests of Metal Material Fabrication of Micro-Pins by Electrochemical Machining Friction Correction and Constitutive Equation of a Non-Quenched and Tempered Steel during Hot Deformation Influence of Rolling Lubrication for Self-Excited Vibration on Tandem Cold Rolling Mill Investigation on Forming Process of Automobile Trunk Side Panel Based on Numerical Simulation Technology Numerical Simulation the Stress Uniformity in Split Hopkinson Pressure Bar Testing Microstructural Evolution of AuSn20/Ni Joint during Annealing Research on Formability of Aluminum Alloy 2024 Sheet by Viscous Pressure Forming Research on Intelligent Precise Pass Design Based on Spline Finite Strip Method Study on Formability of TRIP Steel in Incremental Sheet Forming Status and Prospects of Indirect Squeeze Casting Technology The Optimal Parameters Design of Drawing for the Y Type Teeth Using Four Y-Slot Die-Wheel The Effect of Forming Parameters on the Sheet Stretch in Incremental Sheet Forming (ISF) Process on CNC Lathe Machine Weldability of Ti-Microalloyed Advanced High Strength Steel CP 800 The Blank Optimization of an Automotive Fender Skirt in the Process of Sheet Metal-Forming Based on one-Step Simulation Method The Relationship between Phase Structure and Melting Characteristics of High Cesium Content KF-CsF-AlF3 Aluminum Flux CTOD Evaluation for HAZ Toughness of Offshore Structure Steels with Heavy Thickness Based on API RP 2Z Synchrotron Radiation SAXS Study of Microvoids Structure of PAN Fiber during Spinning Process Chapter 17: Surface Engineering/Coatings Characterization of a Chromium-Free Passivation Coating on Hot Dip Al-Zn Allay Coated Steel Sheets Corrosion Behavior of Alloys for Hot Dipping Development of a Methanol Resistant Epoxy Coating Effect of Contact Angle Hysteresis on Liquid Bridge while Sphere Particles are in Relative Movement Effects of Alkaline Nano-SiO2 Abrasive on Planarization of 300mm Copper Patterned Wafer Effect of Pre-Shot Peening on Plasma Nitriding Kinetics of Austenitic Stainless Steel Facile Method to Prepare Superhydrophobic High-Density Polyethylene Coating Investigation of Nano-ZnO on Properties of Coatings Based on Fluorinated Polyurethane Emulsion Anti-Icing Properties of Superhydrophobic poly (vinyl chloride) Coatings Microstructure and Corrosion Behavior of Laser Cladding Al3Ti-Based Composite Coatings on AA6063 Aluminum Alloy Nano Surface Engineering and its Applications Preparation and Properties of Cathodic Plasma Electrolysis Ni-P Coatings Preparation of Biomedical Coating on Porous Titanium Alloy Preparation of Water-Based Anti-Graffiti Polyurethane Coating Research on Dynamic Erosion Wear Behavior of HVOF Sprayed Nanostructured WC-12Co Coating Study on Environment Friendly Insulated Coating for Non-Oriented Electrical Steel Sheet Synthesis of Two Novolac Type Epoxy Resin Curing Agents and their Application Systematic Theoretical Investigation for Adsorption Behavior of CO on -SiC (001) Surface Study on Anti-Thermal-Fatigue Property and Mechanism of 8407 Steel with Surface Aluminization and Oxidation Treatment Synthesis of Ortho Phthaloyl Chloride Using Triphosgene by Response Surface Methodology Topography and Wettability of Waterborne Polyurethane Coatings with Varying Amounts of Hard Segments Microstructures of Surface Alloyed Carbon Steel Fabricated by Ferrous-Tungsten and Carbon Powders Structure and Properties of TiBCN Coatings Synthesized Using Unbalanced Magnetron Sputtering Surface Hydrophobic Modification of T-ZnOw with Silane Coupling Agent Novel Synthesis and Characterization of Titanium Carbide Coatings on Graphite Flakes Chapter 18: Metallurgical Physical Chemistry and Ferrous Metallurgy Technology Dissolution of Pyrite Particles by Chemical Oxidation and Bioleaching Dynamic Study on Lime Carbonation Effect of pH on PCP Remediation by Smectite Supported Pd / Fe Microstructure Refinement of Medium Carbon Steel through Ti Deoxidation Influence on Concentration of Magnetite with Changing of Fe3+/Fe2+ in Copper Slag Removal of Boron from Metallurgical Grade Silicon by Chloride Molten Salt Simulation of the Coupled Mass Transfer and Gas-Solid Reaction in Porous Packed Beds Study on the Kinetic Models of the Combustion in Sintering Process Study on the Behavior of SiO2 Related Phases in the Vanadium Slag Study on Surface Dispersion and Topography of Ceria Supported on -Alumina Regularity of Nitrogen Macrosegregation in High Nitrogen Steel Research of Flow Simulation with High-Pressure and Bottom-Blowing Nitrogen Calculation Model of Mass Action Concentration for CaO-B2O3-SiO2 Slag System Cognition on the Molten Blast Furnace Slag Granulation Techniques in Contemporary China Design on Closed Loop Soft Water Cooling System for Shougang Qiangang No.3 BF Effects of Impurity on Vanadium Precipitatation Effects of SiO2 and Al2O3 Contents of Converter Slag on its Sticking to MgO-C Brick Melting Properties of Preparing Compound Desulphurizer by Aluminothermy Reducing Caustic Calcined Dolomite Prediction of Oxygen Consumption of BF in Iron & Steel Factories Based on Least Squares Support Vector Machine Research on Balling Properties of Pyrite Cinder with High Content of Copper Study on Molten Steel Mutual Mixing Law of Intermixing Slab of Different Grades Casting XPS Analysis of Stainless Steel Plant Dust The Technical Analysis of Energy Saving and Emission Reducing in China's Iron and Steel Industry Based on LEAP Mode The Study of Nitrogen Solubility in High Nitrogen Steels Smelted with High Pressure and Bottom-Blowing Nitrogen Production of SG Grade Pig Iron in Mini Blast Furnace Study on Technology of Iron Removal during Recycling of Shell of Investment Casting Formation of Cr-Bearing Species in Stainless Steelmaking Dust by Induction Furnace Chapter 19: Non-Ferrous Metals Metallurgy and Technology Aluminum Removal from Leach Liquor of Nitric Acid Pressure Leaching Laterite Ores Atmospheric Acid Leaching of a Ferruginous Nickel Laterite Crystal Structure of bi(1,10-phenanthroline)- copper-Cl chlorine hydrate, [CuCl(C12H8N2)2]Cl0.5(H2O)5.5 Effect of Out-Phase Electromagnetic Field on the HDC Casting Process of Commercial Aluminum Chapter 19: Non-Ferrous Metals Metallurgy and Technology Experimental Investigation of Indium Extraction by Sulfuric Acid Precure Pressure-Atmospheriation Leaching from Tin Dust Extraction of Vanadium in the Comprehensive Recycling of Spent Al2O3-Based Catalyst Investigations on a Novel Process to Recycle Valuable Metals from Spent Al2O3-Based Catalyst Research on the Gold Ore Leaching in Iodine-Iodide System Study on Effect of Complexing Agent Addition on Flotation Index of Copper-Nickel Sulfide Ore Review of Arsenic Pollution and Treatment Progress in Nonferrous Metallurgy Industry Study on Continuous Leaching Process of Vanadium Bearing Clinker Study on Extraction of Vanadium from High Acid Leach Solution of Stone Coal Using Extractant HBL@101 Study on Mineral Separation-Metallurgy Process of Ferro-Nickel Concentrate Prepared from Laterite Ore Study on the Influence of CaO on Reduction Smelting for the Laterite Ore Terminal Optimization Control for Converter Steelmaking Based on the Auxiliary Resources Operating Characteristics Chapter 20: Mineral Processing, Mining Engineering and Technology A Combined Beneficiation Process to Recover Iron Minerals from a Finely Disseminated Low-Grade Iron Ore Analysis of the Relative Position of the Slope and Underground Mining Area and its Influence Properties Application of Crossing Borehole Hydraulic Fracturing in Coal Mine Application of Flotation Column on Flotation of Copper Ore Application of Wet Concrete Spraying Technology in Mine Roadway Comparison Tests between Magnetic Roasting in a Fluidized Bed and Magnetic Roasting in a Fixed Bed Centrifugal High Gradient Magnetic Separation of Fine Ilmenite Comprehensive Utilization Research Progress of a High Mg Phosphate Tailings in China Comparison of the Methods for Calculating Instant Depth of Cut Comprehensive Recovery of Carbon and Iron from Fly Ash Different Slurry Concentration on Settling Effect of the Iron Tailings Differential Flotation of a Pb-Zn-CaF2 Ore in Yunnan Province, China Effect of Different Surfactant on Leaching of Uranium in Sandstone Type Ores with Low Permeability Enterprise Architecture Cybernetics for Global Mining Projects: Reducing the Structural Complexity of Global Mining Supply Networks via Virtual Brokerage Experiment Research on Copper Zinc Mixed Flotation Effect of Rod Arrangement in Matrix on High Gradient Magnetic Separation Performance Grate-Rotary Kiln Pellet Technology of Chromite Concentrate and Study on Mass Balance Calculation Experimental Study on Removal of Arsenic from Sulfuric-Acid Residue of High-Arsenic Flotation of a Copper-Lead Sulfide-Oxide Ore:Using a Combined Depressant for Galena and an Effective Activator D2 for Copper Oxide Minerals Geochemistrical Features of Laojunshan Granite and its Evolution in East-South Yunnan, China Geochemical Characteristics and Ore Prediction of the Pb-Zn Polymetallic District in Kanmashan of Lancang County, Yunnan Impact of Pre-Desliming on Flotation of Low-Grade Zinc Oxide Ore from Lanping Geological Characteristics of the Changdong-Manxu Pb-Zn Deposit in Ninger, Yunnan and its Ore-Search Prospects Mining Design Optimization Research on the Northern Section of 8 Coal Seam in West No.1 Mining Area in Pansan Mine Investigation on Beneficiation Strategy for Collophane Investigation on Molybdenite Separation from a Complex Sulfide Ore Investigation on Removing Acid-Consuming Gangue from a Copper Tailings by Reverse Flotation Mechanism Research on Niobium Distribution Influenced by Roasting Temperature in the Direct Reduction Roasting Process Mining Environment Governance and Sustainable Development of Coal Industry Numerical Simulation of Strata Behavior in Super-Long and Large Mining Height Working Face Research on Classified Magnetic Separation of Oolitic Hematite from Guizhou Province Recovering Limonite by High Intensity Magnetic Separation Technology from Honghe Limonite Ore Recovery of Iron from Tailings of Yangla Copper Ore by Magnetic Separation Research on Process Mineralogy of some Pyrite Cinder Recovery of Molybdenum from Molybdenum Ore with a High Content of Carbon by Separating Carbon from Sulfur Research and Industry Application of New Process of Low Copper Oxide Ore Process Mineralogy and Flotation Kinetic of a Copper Oxide Ore during Sulfuration Flotation Research on Flotation Tests of Sulfide Copper Ore from Yunan Research on Log-Weibull Distribution and its Application in Statistical Distribution of Coal Cuttings Particle Size Recovery of Fine Cassiterite from Tin Tailings Slime by Froth Flotation Study of Lead Flotation Test in Oxide Lead-Zinc Ore Research on Scandium Recovery and Extraction Process Source of Tinny Granite in Gejiu Tin Ore Deposit in Yunnan Province, China Study on Technological Mineralogy of a Certain Lead-Zinc Ore Study on Failure Process Deterioration and its Amelioration of Mine Ventilation System Study on Flotation Technology of Refractory Oxide Lead-Zinc Ore in Huize Surface Analysis of Collophane by X-Ray Photoelectron Spectroscopy Supercritical CO2 Fluid Leaching of Uranium from Sandstone Type Ores The Effect of Zinc Oxide Flotation Using Dodecylamine Zircon SHRIMP Geochronology and Geochemistry of late Jurassic Volcanic Rocks in Huiyin Obo Area, Inner Mongolia, China The Characteristics of Collapse Columns in Duanwang Minefield and their Influences on Gas Emission Quantities of Coal Faces Treatment of Pyrite Cinders for Arsenic Removal Using Acid Leaching Process Using a New Bulk Flotation Process to Enhance the Recovery of Mineral Beneficiation in a Lead-Zinc Sulfide-Oxide Mixed Ore The Harmonious Design on the Beneficiability of the Pt-Pd Ores Containing High-MgO Gangues in Yunnan The Processing Method and Progress of Phosphate Resources Numerical Simulation of Mixed Emulsion Explosive Charging in Water-Filled-Hole Chapter 21: Development Engineering of Oil, Gas Well and Field Analysis of Sealing Ability of Premium Tubing Connection under Axial Alternating Tension Load Analysis of Strength Safety of Perforated String Considering Detonation Parameters Application Analysis and Stress Sensitivity Experiment for a Gas Reservoir in Daqing Oil Field Development of the Ring Block Drill Pipe Casing Wear Tester and Experimental Research Effect Evaluation of Foam System with Dripping Injection Foaming Agent in CO2 Flooding Reservoir Influence of Geometrical and Physical Parameters of Cement on Loads of Casing and Cement Influence of Hardness on Casing Wear Resistance in Polysulfide Water Based Drilling Fluid Strength Analysis of Transitional Segment of Buckling Tubing Nearby the Packer in Vertical Well Study on Prediction Method of Oil and Gas Pipelines through Gob in Loess Gully Region The Field Test about CO2 in Low Permeability Oilfield of Daqing Outskirt The Pressure Drop Calculation of Sea Water Pipe with No Heat Oil and Gas Transferring Research on Gas Temperature Affect on Pharmacy Dust Explosion Pressure in Transport Pipeline Modification Design by Replacing Perforated Shells Barrel Based with 406 Steel Based on Finite Element Analysis Failure Analysis of Pipe's Repaired Mouth and its Improvement Measures and Suggestions Simulation Study on the Spiral Flow under Two Different Intake Ways Chapter 22: Mine Survey, Safety and Prediction Engineering Analysis of Geological Factors Affecting Coal Seam Gas Content and Prediction Analysis on Influence Factors of Top Corner Gas Concentration and Trend Prediction Mine Gas Concentration Pre-Warning Based Monitoring Data Relational Analysis Application of AHP-FUZZY in Analyzing and Evaluating Occupational Hazards of Rolling Enterprise Modelling and Experimental Research of Spontaneous Combustion of Coal Reliability Analysis of Ventilation System Based on Fuzzy Fault Tree Preparation and Inhibition Characteristic of Multi-Phase Foamed Gel for Preventing Spontaneous Combustion of Coal Seepage Law of Gas-Containing Coal on Loading Condition The Pre-Controlling Technology of Spontaneous Combustion in Gutter-Up Gob for Fully Mechanized Top-Coal Caving Face Analysis and Related Preventive Measures of Explosion Risk Factors of LPG Rail Transport Landslide Stability Analysis Based on GeoStudio Overview of Bauxite Selective Dissociation in China Study on Fuzzy Comprehensive Evaluation System in Mine Safety Based on AHP Fault Intelligent Diagnosis of Coal Mine Hoist Based on GCFNN Land Subsidence Prediction Method of Power Cables Pipe Jacking Based on the Peck Theory Chapter 23: Products Design, Intelligent Systems, Sensors, Control and Manufacture A Simulative Study on the Effects of Additional Inertia Force Exerting on the Water Dynamic Features of Damaged Vessels Analysis of Mill Performance of Industrial Scale Ball Mill Using DEM Simulation Building of Fine-Tuning Mechanism Posture and Kinematics Model for Shield Segment Erector Combination Model Based on CBR and SVM for BOF Oxygen Volume Calculation Design and Implementation of Magnetic Bearings for Vertical-Axis Wind Turbine with Permanent Magnetic Synchronous Generator Deep Sliding Parameter Shutdown Research on 1000MW Supercritical Unit Design and Research of Diesel Engine Governor Actuator Based on Finite Element Analysis Design of Elastic Cell in Pressure Sensor Based on ANSYS Illumination Design of the Computer Classroom Numerical Simulation of the Inner Flow Field and the Optimal Design of Hema-Type ATY Nozzle Based on Fluent Precision Element Method for Free Vibration Analysis of Rotational Shells with Partial Viscoelastic Core Performance Test and Flow Pattern Simulation of Small Diameter Thermosyphons Simulation Study of a Novel Controllable Metamorphic Palletizing Robot Mechanism Study on Running Deviation and Adjusting Deviation of Belt Conveyor's Structure Based on Synchronous Technology Study on Application Technology of Lightweight Model Oriented to No-Drawing Manufacturing Study on the Standardized Design of Belt Conveyor Based on Synchronous Technology System of Lifting and Lowering Base Plate Used in Deep-Water Exploration Ship The Application of the Large Center Distance Planer Double-Enveloping Multithread Worm Pair on the Wide-Thick Plate Rolling Mill Theoretic Analysis of the Effect of Carbon Dioxide Real Gas on the Performance of the T-Groove Dry Gas Seal Transient Flow Analysis for Horizontal Axial Down-Wind Turbine Parameter Analysis on Ultimate Load-Carrying Capacity of CFST Arch Rib with New-Type Dumbbell-Shaped Section Simulation and Optimization of Absorption Column of the Dual-Pressure Nitric Acid Production Process Numerical Simulation Research of Equivalent Strain in Every Pass of H-Beam in Cogging Beam Blank Study on Precision and Uniformity Evaluation Method of PEDOT/PSS Ink-Jet Print Film Design of a Three-Axis Digital Output Gyroscope-Based Intelligent Ultrasonic Diagnostic Navigation System Robust H Control of Time-Delay Systems A Novel Approach to Identify Red Palm Weevil on Palms Simplified Calibration of Resistive Pressure Sensor Based on ZMD Chip Study of Nitric Oxide Sensors Based on Nafion/Phosphotungstic Heteropolyacid/Polypyrrole Modified Glassy Carbon Electrodes Understanding the High Sensitivity of Parallel WO3 Sensor Toward NO2 Gas at Low Temperature The Humidity and Temperature Control of Immersion Cycle Corrosion Test Chamber Chapter 24: Engineering Education and Engineering Management Actualizing Quality Engineering, Constructing Characteristic Specialty Business Intelligence as a Competitive Advantage on a Brazilian Chemical Industry in the Global Crisis of 2008, 2009 and 2010 Constructing the Knowledge Base of Training Experts for Power Network Dispatching Operation Mode Construction of Practice Environment to Cultivate High-Quality Technical Talent Cost-Optimal Operation of Heat Exchanger Network Considering Pressure Drop Constraints Preliminary Study on Teaching Reform of Cosmetic Raw Material Science Structural Adjustment of Disciplines in Higher Learning Institutions from the Perspective of Dissipative Structure Theory Study on the Chemical Integrated and Designing Experiment Course of Undergraduate Research on Environment Management Index System of Iron and Steel Industry Chapter 25: Computer Applications in Industry and Engineering A New PMU-Based Fault Location Algorithm for Three-Terminal A Genetic Threading Method with Combined Structure- and Sequence-Based Information A Method to Extend TOPSIS for Fuzzy Multiple Attribute Decision Making A Random Particle Swarm Optimization Algorithm with Application An Improved MeanShift Insulator Image Segmentation Algorithm Application of OPENID Site Certification Technology in Management System of Perforation Information Existence and Blow-Up Properties of Solutions for a Porous Medium Equation Fault Diagnosis of Metallurgical Machinery Based on Spectral Kurtosis and GA-SVM Fractional Differential-Based Approach for CT Image Enhancement MCGS Software of Industry Control and its Automation Application On Applications of Generalized Intelligent Control System Synthesis Method Based on Idea of System Generalized Performance Index Scaling of Engineering Image Based on Interpolation Algorithm The Applied Research of Decoupling Control Algorithm in Gas Mixing Process The Preprocessing Method for Software Reliability Failure Data The Information Key Technologies for Quality & Safety Monitor and Management of Agricultural Products The Study and Application of Gaussian Process Surrogate Model Based on Gradient Particle Swarm Optimized Hyper-Parameters Petrophysical Facies Classification Based on Fuzzy Inference Networks Development of Health Monitor Instrument Based on LabVIEW Stable Computer Control Algorithm of Von Neumann Model Development of Health Monitoring Instrument Based on LabVIEW Earth Fault Feeder Detection Based on Discriminant Analysis

by "Nielsen BookData"

Details

• NCID: BB12974469
• ISBN:
  • 9783037855898
• Country Code: sz
• Title Language Code: eng
• Text Language Code: eng
• Place of Publication: Durnten-Zurich
• Pages/Volumes: 5 v. ([4082] p.)
• Size: 24 cm
• Parent Bibliography ID:
  • BA24926058