Nanotechnology and precision engineering : selected, peer reviewed papers from the International Conference on Nanotechnology and Precision Engineering (ICNPE 2012), 26-27 December 2012, Guilin, China
著者
書誌事項
Nanotechnology and precision engineering : selected, peer reviewed papers from the International Conference on Nanotechnology and Precision Engineering (ICNPE 2012), 26-27 December 2012, Guilin, China
(Advanced materials research, v. 662)
Trans Tech Publications, c2013
- : [set]
- Part 1
- Part 2
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Selected, peer reviewed papers from the International Conference on Nanotechnology and Precision Engineering (ICNPE 2012), December 18-19, 2012, Guangzhou, China. This 2 volumes set is devoted to the multidisciplinary study and practice of high accuracy engineering, metrology, and manufacturing. This volume also includes the applications of high precision machines, instruments, and components, including fundamental and applied research and development in manufacturing processes, fabrication technology, and advanced measurement science.
目次
Preface and Conference Organization
Chapter 1: Nanomaterials and Nanotechnology
Synthesis of Double-Walled Carbon Nanotubes by Floating Chemical Vapor Deposition Method in a Reactor with Varied Diameter
Feasibility Study of Nanomaterial Level Powder Preparation by Wet Ball Milling and the Performance Analysis of Ceramics
Growth and Photoluminescence of -SiC Nanowires on Porous Silicon Array
High Quality Porous Anodic Alumina Membrane Growing on Micron Thickness Aluminum Film Sputtered on Silicon Substrate
Highly Active K2Ti6O13 Nanowires: Synthesis, Characterization and Photocatalytic Activity
In Situ Polymerization Organic-Inorganic Hybrid Materials Monomer Casting Polyamide 6/ Nanorods Yttrium Hydroxide
Non-Injection One-Pot Synthesized Lanthanide Ions Doped CdSe Nanocrystals with their Energy Transfer
Preparation of HA-Zirconia Nanocomposite for Dental Applications
Research on Friction and Wear Properties of MC Nylon/ Carbon Nanotubes Composites
Star Hydrophilic Polymer Brushed Nanoparticles Covalently Tethered on Si(100) Substrates via Surface-Initiated Atom Transfer Radical Polymerization (ATRP)
Structural and Electrical Properties of High C-Orientation GaN Films on Diamond Substrates
Accurate Solutions to Nonlinear Vibration of Single-Walled Carbon Nanotube via Homotopy Perturbation Method
Study on Biomechanical Properties of Quartz Fiber Reinforcd n-HA/PA66 Composites
Study on MnO2 Nanomaterials Catalyze Electrogenerated Chemiluminescence of Ru(bpy)32+
Study on Preparation and Photoluminescence Performance of High-Directional ZAO Nanorod Arrays
Template-Free Synthesis of Hierarchical m-ZrO2 Nanorods and its Formation Mechanism
Utilization of Aquatic Weed for Environmental and Rapid Synthesis of Silver Nanoparticles
Preparation and Research on the Lateral Elastic Modulus of the MnO2 Nanowires
Research on Characterization Methods of Nano Dimension Standards
Fabrication of Hollow Microneedle Arrays Based on Special X-Ray Exposure
Finite Element Simulation of Precision Cutting Monocrystalline Silicon
Fundamental Study on Needleless Electrospinning Based on Metal (Card) Clothing
Influence of Ageing on Surface Quality of Machined Nanostructures
Study on SF Nanofibrous Mats via Electrospun with Different Spinning Solvent as TFA/DCM and FA
Wet Etching of Aluminum Periodic Patterns in Micrometer-Scale
Molecular Dynamics Simulation of Nanoscale Contact Process of Plane on Plane
Research on Fabrication for Nanostructures on the Surface of GaN
Carbon Nanotubes Supported Pt Catalysts for Ethanol Oxidation in Alkaline Solutions
Copolymer Nanoparticles Prepared by Self-Assembly of Poly(ethylene glycol) and Poly- -Glutamic Acid and its Characteristics
Effects of DTAB on Performance of Nano Pd/C Catalyst for Purification of Terephthalic Acid
Investigation on Viscosity of Carbon Nanofibers Reinforced Epoxy
Preparation and Optimization of a Live Newcastle Disease Virus Vaccine Encapsulated in Chitosan Nanoparticles
Preparation of Nano Pd/C Catalyst for Purification of Terephthalic Acid by Sol-Gel Method
Research on Reaction Kinetics of Photocatalytic Degradation of Methylene Blue in Water Solution with SrTiO3 Nano Film
Study on Photocatalytic Performance of Ag - AgBr/RGO
Application of Nano- TiO2 Used in Road Engineering and its Long-Term Decomposition Effect
Deposition and Properties of Hydrogenated Microcrystalline Silicon ( c-Si:H) Films for Solar Cells
Large Pore Nanocrystalline TiO2 Films for Quasi-Solid State Dye-Sensitized Solar Cells
Strength and Drying Shrinkage of Pavement Concrete with Nano-Particles
Nanotechnology Application in Sports
The Application Prospects of Nanotechnology in Future Competitive Sports Development
Effects of Nano-Sized Titanim Dioxide (nTiO2 ) on the Growth and Biophysical Characteristics of Chlorella sp.
Nanocellulose Applications in Environmental Protection
One-Step Synthesis of Nano-Size Iron Oxide /Three-Dimensional Wormlike Hierarchical Mesoporous SiO2 Catalysts and its Catalytic Performance on Phenol Hydroxylation
Research Progress of Nanomaterials about Removal of Toxic Metal Ions and Organics Used in Water Treatment
Synthesis and Characterization of MCM-41 Molecular Sieves Nanoparticals
Applications of Nanotechnology in Hip Implants
Microhardness of Electroless Composite Coating of Ni-P with SiC Nano-Particles
Characterization, Intestinal Absorption and Pharmacokinetics of Long-Circulating Nanoparticles Loaded with Panaxnotoginseng saponins
Theoretical Study of Adsorption CO Molecule on Palladium-Doped Boron Nitride Nanotubes
The Investigation of Electrospun Polymer Nanofibers as a Solid-Phase Extraction Sorbent for the Determination of Benzimidazoles in Pork
Optical Characterization of LaF3 by Variable Angle Purged UV Spectroscopic Ellipsometry
Chapter 2: Material Science, Materials Processing and Manufacturing Processes Technology
Research on the Influence of Salt Fog Corrosion Behavior of 6005A Aluminum Alloy Welded Joints by Environment Humidity
Corrosion Behavior of Ultra-Fine Grain Chromium Bronze Prepared by Equal-Channel Angular Pressing in HCl Solution
Analytical Solution of Mushy Zone under Directional Solidification
Equivalent Circuit Model for the Electrochemical Reaction Process within the Solid Oxide Fuel Cell Composite Electrode
Research on the Influences of High-Speed Milling Parameters on Surface Work-Hardening
Characterization of Interfacial Layer of DUV Coatings by Spectroscopic Ellipsometry
High Performance Ka-Band InAlN/GaN/AlGaN HFET on SiC
Preparation and Tribological Performace of the Complex of - Cyclodextrin and RC2540 Dialkyl Pentasulfide
Study on Subcritical Water Extraction of Flavonoids from Scutellaria baicalenses
Study on Preparation and Characterization of Modified Montmorillonite with the Aromatic Isocyanate
Determination L-Arginine from Grape Juice with Sakaguchi Reaction
Effect of Folin Reagent from Different Sources on Protease Determination
Influence of Chromium on CO2/H2S Corrosion Behavior of X100 Grade Pipeline Steel
Texture Characterization of Low- and Full-Fat Cheese Fermented by Lactobacillus acidophilus during Ripening Process
Experimental Study on High-Speed WEDM Finishing in Gas Based on Central Composite Design
Influence of Sintering Temperature on Performance of Red Mud Lightweight Ceramsite
Influences of Different Waterproofing Agents on Water Resistance of Foamed Cement
Performance Study of Fiber Reinforced New Lightweight Insulation Materials
Preparation and Study on the Performance of Glazed Hollow Beads Thermal Insulation Materials
Properties Research and Mechanism Analysis of Polypropylene Fiber Reinforced FGD Gypsum Composites
Research on Magnetic Separation Methods for the Extraction of Nucleic Acids
Structure Activity of Pb2+ Adsorbed by Modified Streptomyces erythreus
Study on Production of Concrete Small Hollow Block with Recycled Aggregate
Study on the Double-Fined Treatment and Superplasticity of GCr15 Die Steels
Thermodynamics-Based Alloy Design and Application for Toughening in High Strength High Toughness Cold Work Die Steel
Ultrasonic Nondestructive Testing on False Welding Joint of Spot Welding for 00Cr18Ni10N Stainless Steel
Synthesis of AgCl/BiOCl Composite Photocatalyst and its Photocatalytic Activity under Visible-Light Irradiation
The Electrochemical Analysis of Trace Titanium Addition to the High Pure Zinc Electrode in Seawater
Effect of Polishing Treatment on Rumpling of Oxide Scales on NiPtAl Coatings with Different Pt-Content
Electrochemical Studies of 316L/20G Clad Pipe Weld Joint Corrosion Behavior
Extraction and Purification of Tea Polyphenols and EGCG
Fabrication Methods for Planar Solid Oxide Fuel Cells: A Review
Influence of Admixture on the Properties of Magnesium Oxychloride Cement
Influence of Fly Ash on the Properties of Magnesium Oxychloride Cement
Optimization of the Heating Conditions in the Production Process of High Gel Strength Egg White Powder
Properties of Al Films Depend on Substrate Temperature by DC Magnetron Sputter Deposition
Research on Anti-Coxsackievirus B Activity of Konjac Oligo-Glucomannan Sulfate in Hela Cell Line
Effect of Rare Earth Metals on Microstructure and Impact Property of Duplex Stainless Steel
Experiment of Different Admixtures on Antifreeze of Vegetation-Growing
Influences of Emulsion on Water Resistance of Vitrified Micro Bubbles Thermal Insulation Material
Preparating Arsenic Trioxide with Sulfuric Acid Wet Oxidation
Thermodynamic Analysis and Observation of Inclusions in Ferritic Stainless Steel with Rare Earth
Treating the Eutrophic Water by Ultrasonic - Flocculation Sedimentation
Application of Taguchi Methods and ANOVA in Optimization of Process Parameters for Surface Roughness of Fused Silica in the Magnetorheological Finishing Processes
Highly Transparent and Low Resistivity Al-Doped ZnO Thin Films Grown by Pulsed Laser Deposition under Different Oxygen Flow Rates
The Soil Geochemical Abnormal Characteristics in Eastern of Luonan County in Shanxi Province
Effect of Grain Size on Structural and Optical Properties of CdO Thin Films Obtained by PLD
Metastable Phase Equilibrium of a Ternary System of K+,Mg2+/B4O72---H2O at 25 DegreesC
Fretting Damage Analysis and Research on Pipe Thread
Geological Characteristics of Ag-Pb Deposit in A He Lan, XinJiang
Preparation and Characterization of Magnesium Borate Whisker
Ferro-Antiferromagnetic Coupling and Enhancement of Magnetoresistance in La0.67Ca0.33MnO3/LaMnO3 Composites
Mechanism of Flow Properties for Biodiesel Blends at Low Temperature
Chapter 2: Material Science, Materials Processing and Manufacturing Processes Technology
Synthesis of Hydroxyapatite Microspheres with DDAPS as Template
Analysis of Surface Properties of Diamond-Like Carbon Films by a Sputtering Deposition
Influence of Residual Stress on the Thermal Expansion Behavior of Electroformed Nickel Layers
Promoting Behavior of Fungal Degradation Polychlorinated Biphenyl by Maifanite
Perchlorate Removal Using the Calcination Products of Mg-Al-Fe Hydrotalcite-Like Compounds as Adsorbent
Development of Soft Magnetic Materials Prepared by Metal Injection Molding
Study and Implementation of Large-Diameter Fiber Termination Used in High Power Dental Treatment
Influence of CO2 Kinetic Cooling Effect on the Phase of Second Harmonic Gas Photoacoustic Signal
Three-Atom Entanglement Sudden Death and Birth in Cavity QED with the Influence of the Stark Shift
Scalable Generation of Three-Atom W States via Atom-Microtoroidal Cavity Coupling System
Chapter 3: Product and Devices Design, Modelling, Simulation, Analysis and Manufacture
The Mechanical Reliability of a Commercial MEMS Microphone
Design and Simulation of Film Bulk Acoustic Wave Resonator in Ku-Band
Dual-Edge Triggered T Flip-Flop Structure Using Quantum-Dot Cellular Automata
Influence of Insulator Layer Width on Propagation Properties of Symmetric Surface Plasmon Polariton Mode in Metal-Insulator-Metal Waveguide
Fluid-Structure Coupling Analysis of Traveling Wave Micro-Pump
The Research and Design of Miniature Wheat Threshing Machine Based on Direct-Current Motor
Droplet Streaming and Nebulization Induced by the Shear Horizontal Surface Acoustic Wave
The Effect of Different Turbulence Models on the Emitter Discharge by Using Computational Fluid Dynamics
Vibration Analysis of a Rail Operating Vehicle
Compare Study between Planet Motion and Orbital Motion in CCOS
Flow Field Simulation of the Oil-Burned Pressure Boiler Burner
The Simulation Analysis of Three-Axle Vehicle Comfort on Simulink
Analysis of Coupled Bending-Axial Vibration of a Rotor
Design and Aerodynamic Characteristics Study of a Spherical Aircraft
Design and Research of a Construction Robot Based on Series Parallel Structure
Working Qualifications and Dynamic Analysis of Brake Wheels on a Flexible Squirm Pipe Robot
Finite Element Analysis of Free Expansion of Coronary Stent Based on ANSYS Workbench
Modal Analysis of BT Spindle-Toolholder Interface Based on Abaqus/Standard
Numerical Investigation of Cavitating Turbulent Flow in a Francis Turbine Runner Fitted with Splitter Blades
Numerical Prediction of Sediment Erosion on Francis Turbine Blades
Optimizing Design Alternation through Balancing Customer Satisfaction and Risk
Lifting Chuck Design Based on Fuzzy Expert System
Characteristic Finite Strip Analysis of Sheet Materials on Multi-Intelligence Agents
The Simulation and Analysis of the Automobile Wheel Hub Strength Test Based on the Finite Element Method
The Production and Experience of Hot Charging Process of Concasting Billet
Cutting Parameter Optimization of Stability in Cylindrical Shell Based on Particle Swarm Algorithm
Self-Compensated Precision Hydrostatic Rotary Bearing
Optimum Design of the Support System of the SiC Primary Mirror with 1m Aperture
Isolation Effect Research about RFPS Seismic Isolating System on Bridges
Design of a Novel Blood Cell Analysis System Based on Capillary Centrifugation and Stratification Technology
Shock Absorber Design and Analysis of a Catapult-Spherical Reconnaissance Robot
Chapter 4: Sensors, Measurement and Detection Technology
Environmental Monitoring System Based on ZigBee Wireless Sensor and Low-Power Technology
Error Calibration System for Time Grating Angular Displacement Sensor
The Airborne SAR-ATI-GMTI Based on the Actual Flight State
Monitoring System of CAN Bus Based on OPC Technology
Systematic Calibration Method for FOG Inertial Measurement Units
Acoustic and Vibration Characteristics of Stiffened Finite Cylindrical Shells in Water under Multiple Axial-Excitations
Line to Plane Parallelism Error Evaluation of the New Generation GPS Based on DCWPSO
Remote Monitoring Technologies of Performances of Battery Charger in Digitalized Transformer Substation
Research of Automotive Controller Area Network Bus Detection System
Study of Fault Transient Detection Method Based on Chaotic Neural Network
Characterization of Integrated GMR Sensor with Angular Variation
Based on Large Public Building Energy Monitoring System of Things
A New Capacitive Sensing System for Roundness Measurement
A Design of Turbidimetry Based Rapid Microbiology Detector
Study of Free Length Detection for Bolster Spring of Railroad Tracks
Research on Channel Impedance Parameters Dynamic Change Model of XCTD Profiler
TPMS Test Management System Based on Wireless Sensor Network
Convenient Calibration Procedure for Structured Light Projection System
Process-Monitor's Multimodal Optimization with Dynamic Cloning Based Immune Network Algorithm
Study of Liquid Single Particle Size Detection Based on Lateral Scattering Technique
Chapter 5: Electronics and Control Technology, Power Systems and Devices Applications
Anticontrol of Chaos for a Stable Permanent Magnet Synchronous Motor System via Time-Delay Feedback
A New Approach to Robust and Non-Fragile Control of Uncertain T-S Fuzzy Systems with Interval Time-Delay
Implementation of an Intelligent Telephone Dialing System Based on the Control of Steady-State Visual Evoked Potentials
Simulation of Large-Area Inductively Coupled Plasma Source
Design of Colliery High-Voltage Integrated Protector Based on DSP TMS320F2812
Levitation Control of a Planar Magnetic Levitation Stage Based on Improved Auto-Disturbance Rejection Controller
Servo Control of Thrust Position for 6DOF Magnetic Suspension Stage
Research on Residual Current Protective Device Based on Micro-Controller of MSP430
The Design and Implementation of Brushless DC Motor Control System
Some Noteworthy Aspects in Designing High-Speed PCB
Design of the Approved Low Power Energy Recovery Logic Circuit
Dynamic Observer-Based H Control for Networked Control Systems in Multiple-Packet Transmission with Random Delays
Design of Information Acquisition and Transmission System Based on Arm for Disaster Rescue
Inter-Harmonics Analysis Based on the STFT Applied to the Power System
Chapter 6: Computer, Automation, Comunication and Image Applications in Industry and Engineering
A Method for Graph Compression
A Vehicle License Plate Location Method Based on the Mixed Programming between VC++ and Matlab
Design and Realization of Auto-Programming System for SLS on CAD
Research on Encryption Algorithm Based on the Chebyshev Neural Network
Minimum Zone Evaluation of Symmetry Error for Flatness to Flatness Based on the New Generation GPS
A Scientific Computing Resource Sharing Management in Internet-Oriented Environment
Measuring Dynamic Sales Impacts of LBA Using Wireless Communication Technology
Research and Design of a LC-VCO for 3.125Gbps Serial Communication Applications
Research on Encryption Algorithm Based on Delayed Chaotic Neural Network
The Password Mechanism Analysis and Research Based on the Chaos Searching
Analyzing an Example Based on FastCAM NC Profiling Software
Design of Adder Based on Abacus Algorithm
Design of Location and Tracking System for Special Crowd Based on ARM
Ceramic Tile Color Difference Classification System Based on Color Histogram
Based on the Hybrid Genetic Simulated Annealing Algorithm for Solving Rectangle-Packing
Data Classification Using Support Vector Machines with Mixture Kernels
Multiscale Image Segmentation Using Energy Minimization
Research and Design of Vehicle Dynamic Safety Warning System
Multiple Attribute Group Decision Making Based on Dominance of Intuitionistic Fuzzy Sets
Ontology-Based Context Modeling for Mobile Catering Recommendation
Job Scheduling Algorithm for Cloud Computing Based on Particle Swarm Optimization
Semantic Representation of Flatness Based on ALC(R) and Mathematical Definition
Modeling of Nucleated Cells and their Variety Effect on Light Holographic Characteristics Based on VirtualLab Technique
Research of CamShift Algorithm Used in Object Tracking of Selfvision Underwater Robot
Efficient Phase Unwrapping Algorithm Based on Fringe Projection Applying Reliability-Guided Technique
Chapter 7: Education, Management Applicalions and Other Related Topics
Cooperative Innovation, Common Development, Exploration and Practice to Cultivate High-Quality Talents - Faculty of Material Science and Engineering in KMUST
Research on Engineering Quality Connotation and Cultivation
Study on Quality Management of Logistics Equipment Systems
The Comprehensive Economic Benefits Evaluation of Power Generation Projects under the Background of Low-Carbon Economy
「Nielsen BookData」 より