Applied mechanics and materials I : selected, peer reviewed papers from the 2012 International Conference on Applied Mechanics and Materials (ICAMM 2012), November 24-25, 2012, Sanya, China
Author(s)
Bibliographic Information
Applied mechanics and materials I : selected, peer reviewed papers from the 2012 International Conference on Applied Mechanics and Materials (ICAMM 2012), November 24-25, 2012, Sanya, China
（Applied mechanics and materials, v. 275-277）
Trans Tech Publications, c2013
- : [set]
- Part 1
- Part 2
- Part 3
Available at / 1 libraries
-
Part 1A69500/275-1400058776,
Part 2A69500/275-2400058784, Part 3A69500/275-3400058792 -
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The collection of peer reviewed papers covers all aspects of mechanics and materials: theoretical, experimental, and computational. Specific topics of interest include: mechanics of materials, rock and soil mechanics, fluid and heat mechanics, machine parts and mechanisms, composites, micro/nano materials, steel and alloys, and building materials and other related topics.
Table of Contents
Preface and Conference Organization
Theoretical and Applied Mechanics
Chapter 1: Mechanics of Materials
The Numerical Study on Errors of Stress in Anisotropic Linear Elastic Material when Simplified as Orthogonal one
Based on the Numerical Simulation of Random Aggregate Concrete Model of the Penetration of the Two Material Models
Singularity Analysis for Plane Tri-Material Junctions
Description of Large Deformation Problem Using Means of Visual Strain
Biomechanical Study on the Influence of Shaping Amplitude on Material Strenght of Titanium Implant
Comparison of Two Hyperelastic Models for Carbon Black Filled Rubber
Small Scale Effect on Boundary Conditions of Cantilever Single Carbon Nanotubes
Impact Energy Calculated by a Plastic Material Deformation
Finite Element Mechanical Analysis of Cushion Seals in High Speed Pneumatic Cylinder
Influence of Rolling Bearing Steel Ball Temperature Deformation on Radial Clearance
Mechanical Model and Finite-Element Simulation Analysis of Hemp Stalk
Stress Analysis of Transmission System and Blade for Offshore Wind Power Generator
Finite Element Analysis of Thermal Residual Stress in Unidirectional Fiber Reinforced Composite
Experimental Results and Model of Stress-Field-Induced Strain in NiMnGa Single Crystal
The Influence of Void Orientation on Stress and Strain Fields for Nickel-Based Single Crystal Superalloys under Creep Loading
The Research on the Key Factor Affect the Precision in Stress Analysis for the Rotor of Steam Turbine
The Thermal Stress of a Domestic 300MW Steam Turbo Unit during its Startup and Shutdown
Aeroelasticity Analysis of Rotor Using Dynamics of Multibody Systems
General Solutions of Plane Problem in One-Dimensional Hexagonal Quasicrystals
Structural Strength Analysis of FRP Yacht by FEM
Experimental and Finite Element Based Investigations of In-Plane and Out-of-Plane Properties of Aluminum Honeycomb
A Study of the Relationship between Fabric Property and Clothing Pressure of Knitted Underwear
A New Method to Estimate the Projection Angles of Fragments from a D Shape Configuration
Quick Drawing of Internal Forces Diagram of Beam
Cyclic Bending Response of Single- and Polycrystalline Thin Films: Two Dimensional Discrete Dislocation Dynamics
An Unstructured Moving Grid Scheme for Shock Impacting on Material Interface
Thermal Shock Behavior of a Functionally Graded Material Plate with a Crack
Mixed-Mode I/II Crack Extension in Thin Sheet Metal
An Interaction Energy Integral Method for an Interface Crack in Two Nonhomogeneous Plates under Thermal Loading
The Research on the Method of Simulating Crack Size Based on Reducing Local Structural Stiffness
Analysis of the Crack Propagation Based on Extended Finite Method
Bending Fatigue Life Prediction of Fillet Rolled Crankshafts
Ultra-Long Life Fatigue Behavior of Welded Joints with Shot Blast Treatment
Conceptual Study on an Origami Patterns of Type I Tapered Square Tub with and without a Crack
Calculation of Fatigue Crack Initiation Life by Coupled Finite Element Method
Study on Effect of Cycle Counting Correction Factors in Spectral Based Fatigue Computation
Numerical Examination of Mixed Mode Crack in SSY: A Review
Numerical Estimation of Energy Release Rate of Mode I Crack by Load Displacement Procedure in LEFM and SSY Regimes: A Review
The Static Stress Intensity Factor around the Anti-Plane Crack in an Orthotropic Functionally Graded Material
Fatigue Crack Propagation Prediction under Single Overload Variable Loading
Experimental Study of the Influence on the Residual Fatigue Life of 45 # Steel Fatigue Damage Specimens
An Experimental and Numerical Hybrid Technique for Analysis the Fracture Behaviors in Natural Fiber Reinforced Composites
Study on Broken Wire Impact and Safety Degree Evaluation
Calculation Model Study on Damaging Stress of Hydraulically Created Fracture Propagation
Estimation of K in Ductile CT and SENB Specimens under LEFM and SSY Regimes by J Integral Method: A Review
Natural Frequency Spectra of Cracked Beams for Dynamic Property Characterization
Chapter 2: Rock and Soil Mechanics
Simulation and Analysis on Slope Cutting Reinforcement Scheme of Lishigou Tunnel
Sensitivity Analysis of the Influences of Rock Mechanical Parameters on the Deformation of Underground Caverns
Research and Analysis of Active Earth Pressure on Retaining Walls with Layered Non-Cohesive Backfills
Primary Physical-Mechanical Characteristics on Marine Sediments from Zhoushan Seas in Sino Mainland
Numerical Simulation and Laboratory Experiments of Hydraulic Fracturing of Highly Deviated Well
Measurement and the Distribution Law of In Situ Stresses of Tingnan Coal Mine
A New Method to Estimate Rock Mechanics Composed both the Dynamic and Static Test Means
Research on Deformation Stability of Soft Rock Slope under Excavation Based on FLAC3D
Study of Variation of Soil Stress State Based on the Curve of Normalized Strain- Pore Water Pressure
Experiment and Analysis on Rheology Dynamic Characteristics of Soft Soil
Effect of Permeability Coefficient of Reservoir Bank Slope on Pile Displacement and Ground Deformation
Experimental Study on Gravel Soils of Matrix Suction
Experimental Techniques for Mechanical Properties of Gas Hydrate-Bearing Sediments
The Geochemistry Research on Eocene Volcanic Rocks in Sanshui Basin
Experimental Study on the In Situ Mechanical Properties of Methane Hydrate-Bearing Sediments
The Stress Calculation of Refracturing Based on Damage Theory
The Principle of Effective Stress Theory Research Based on Channel Rate
Density Calculation of Saturated Cohesive Soil under Different States in Ningbo Area
Strength Criteria of Jointed Rock Mass in Unloading Area
The Stress Formula of Soil under Vertical Line Load
Site Investigation of a Loess Slope for a Field Irrigation Test
Study on Boundary Depth and Critical Shear Wave Velocity of Saturated Loess Foundation Liquefaction in Different Regions
Numerical Simulation of Land Subsidence in Hangu-Tianjin
Analysis of Displacement and Deformation Caused by Underground Mining in one Coal Mine of China
Research on Brittleness and its Definition of Mudstone
Micro-Study of Soil's Inherent Anisotropy with PFC Simulation
Experimental Research on Compression Characteristics of Compacted Loess
Chapter 3: Fluid and Heat Mechanics
Fluid-Structure Interaction Modeling by ALE and SPH
Effect of -Cyclodextrin on the Water Loss and Hardness of Frying Chestnut during Storage
Numerical Simulation of Unsteady Flow around Ahmed Body with Active Flow Control
An Experimental and Numerical Study of Pressure Drop and Hydraulic Behavior in Scaled-Down Fuel Bundle
A Multi-Scale and Level Set Algorithm for the Inverse Problem of Wave Equation
Evaluation on the Application of Two-Fluid Multiphase Model to Supercavity
The Analysis on the Starting Friction Torque Increase of Magnetic Fluid Revolving Sealing
Design Methodology and Unsteady Aerodynamic Characteristics of a Rectangular Variable Geometry Hypersonic Inlet
Numerical Study of the Influence of Waving Bottom on the Fluid Surface Wave
Low-Diffusion Preconditioning Roe's Scheme on Simulation of Low-Speed Flows
Low Speed Preconditioning Algorithm Used in the Process of Calculating Euler Equation
The Method of Dynamic Reserves Prediction for a Constant Volume Gas Reservoir
Non-Newtonian Fluid Flow and Heat Transfer in Microchannels
Effects of Unforced Bounday Layer Transition on the Performance of a Two-Dimensional Hypersonic Inlet
Lattice Boltzmann Simulation of Effect of Rolling Manipulation of Traditional Chinese Massage on Blood Flow
Ghost Cell Immersed Boundary Method for Simulating Flow over Two Circular Cylinders in Tandem Arrangement
Numerical Investigation of Vortex Shedding Modes of Flow past Two Circular Cylinders in Side-by-Side Using Immersed Boundary Method
Comparative Study of Synthetic Jet Numerical Simulation Methods
Analysis of the Modeling of Single-Phase Flow in a Perforated Pipe with Wall Fluid Influx
An Easy Calculation Method on Sweep Efficiency of Chemical Flooding
Numerical Simulation of Underwater Ellipsoid Motion near Free Surface
A Two-Phase Hydrodynamic Model for Transport Pipelines in Vacuum Sewer Systems
Flight Dynamics Modeling and Analysis of Flexible Hypersonic Flight Vehicles
The Zero-Mach Limit of Compressible Euler Equations
Linear Instability Analysis of Confined Compressible Boundary/Mixing Layers Flow
Research on Internal-Mixing Nozzle for the Icing Environment Simulation
Equilibrium Characteristics of High-Speed Train in Crosswind
Singular Cell Adaptive Method for Adaptively Refined Cartesian Grid in the Simulation of Flow around Airfoil
Numerical Simulation Research of Aerosol Cooling
Finite Element Analysis of Airflow Field for Vacuum Chamber in Air-Suction Seed Metering Device of No-Till Seeder
The Study of Deepwater Drilling Parameters Optimization
Numerical Simulation of Double Inlet Cylinder Cyclone Using CFD
Extrusion Uniformity Optimization for Shaping Channel Design in Large-Scale Die-Plate of Underwater Pelletizing
Design for Wind Tunnel Testing of Scaled Model by CFD Method
Numerical Analysis of Heat Transfer in the Concentric Heat Exchanger
A Study on Elliptical Gas Flow in Double Porosity Gas Reservoirs
Design of the Wind Channel for the Test-Bed of Aerodynamic Brake
Stability Parameter H of the Flow of Power-Law Fluid in Annulus with the Inner Cylinder Executing a Planetary Motion
The Fluid-Solid Coupling Seepage Mathematical Model of Shale Gas
Research on Aerodynamic Characteristics of a Simplified SUV Model
An Investigation of a Novel Parallel Computation Scheme Designed for a Simulation of Amino-Acid Leaking Problem inside -Al2O3 Nano-Channels
Numerical Modeling of Wave Propagation in Poroelastic Media with a Staggered-Grid Finite-Difference Method
Numerical Simulation of the Micromixing Induced by Ultrasonic Vibration of Sidewall-Trapped Microbubbles
Numerical and Experimental Simulation on Aerodynamic Character of Crescent-Shaped Iced Conductor
Numerical Simulation on the Dynamics for the Ultrasonic Cavitation Bubble in Chitosan Solution
Research on the Coarse Particles Velocity Characteristic in Fluidized Bed
Numerical Simulation of Coupling Heat Transfer in Sealed Airborne Electronic Equipments
Electrokinetic Flow and Measure Method in Microfluidic
Study on Optimization of Evaporative Condenser Nozzle with CFD Method
Study of Inert Current System Designed for Pressure Control of Micro-Positive Pressure Distillation
CFD Research and Investigation of 2011 P4/5 Competition Rear Wing
Effect of Continuous Arterial Blood Flow of Intra-Aorta Pump on the Aorta - A Computational Study
Taylor Series Numerical Method in Transient Heat Conduction Analysis
Numerical Analysis of Aerodynamic Noise of a New High-Speed Train
Effect of Latent Heat on Insulation Characteristics in Phase Change Roof
Chapter 4: Machine Parts and Mechanisms
Wrapping Angle Compensation Model of Cold Rolling Strip Shape Signal
The Study on Detonation Front Shape of a Charge Shot by High-Speed Photography
Dimension Analysis of Dynamic Response of Cylinder Shell under Impact
The Composite Control for Single-Link Flexible Manipulator Using Dynamic Sliding Mode and Optimal Based on Dynamic Switching
Comparative Study on Rigid-Flexible Model of Oblique Impact between Cylinder and Ground
Tolerance Ring Design in the Actuator Arm of a Hard Disk Drive Using Finite Element Analysis
Stress and Strain Analysis of SRM Based on Monitored Shipboard Service Environment
Research on Failure Trend of Lifter on Basis of Static Strength Analysis
An Examination of Blade Load Calculations Based on Rigid-Flexible Coupling Model
Penetration of Aluminum Targets by Ogive-Nosed Projectiles at Oblique Angles
Research on Vehicle Lifting Jack Structure Failure Trend on Basis of Static Strength Analysis
Discuss about Linear System Transfer Function and Optical Transfer Function
Empirical Approaches to Calculate External Blast Load on Structures
The Double Pendulum Model and Nonlinear Dynamic Characteristics of the Pantograph of High-Speed Train
Study and Design of Double Shear Regional Magnetic Rheometer
Optimal Spacecraft Attitude Maneuvers via Adjoint Method
Study on the Damage of Earth Penetrator's Charge Weight and Depth of the Burst Point to the Runway
Founded and Explore of the Multiple Primary Structure of Force Method
Impact Response of Circular Tube with Concentric Plunger
Mechanical Design for a Power Wheelchair with Self-Actuated Seating Functions Based on Ergonomics
Optimization Research on the Geometrical Parameters of PDC Core Bits Based on ANSYS
Strength Calculation of Cubic Hinge Sleeve Based on Ansys
Simulation Analysis of Stiffness of Automotive Joint
Research of Ultrasonic Oblique Incidence for Testing Bonding Strength Weakening in SRM
Analysis and Circuit Simulation of New Five Terms Chaotic System
The Green'S Function Solution of Right-Angle Plane Including a Semi-Cylindrical Canyon
Based on the Improved Homotopy Perturbation Method for Solving Nonlinear Equations
Chapter 5: Vibration
Oscillation of Neural Type Nonlinear Impulsive Hyperbolic Equations with Several Delays
Oscillation of Nonlinear Impulsive Hyperbolic Equations of Neutral Type
Research on the Dynamic Response of Floating Foundation of a Tri-Floater Offshore Wind Turbine
A Method for Improving Envelope Spectrum Symptom of Fault Rolling Bearing Based on the Auto-Correlation Acceleration Signal
Reducing Vibration with Advanced Lubricants for Mechanical System
Solutions of a Dynamics Nonlinear In-Plane Vibration of Suspended Cable Investigated by the Mixed Averaging Method
Coupling Analysis for a Submerged Ring-Stiffened Cylindrical Shell Treated with Active Constrained Layer Damping
Frequency and Amplitude Dependent Dynamic Model of Rotor Elastomeric Damper with Refined Nonlinear Stiffness
Research of Vibration Control Method on Turbine Bent Rotor
Response of Ultra Precision Machine under Micro Environment Vibration
Study on Frequency Tuning of Parallel Mechanism for Reducing Vibration
Reseach Progess of Microperforated Panel Absorber
Online Adaptive Fuzzy Neural Identification of a Piezoelectric Tube Actuator System
Vibration of a Tube with the Axial Loads and Fluid
Shaft Instabilities in Two-Stage Gear Systems
Research on Dynamic Transfer Performance of High-Speed Wheel Set
Homoclinic Tangencies for a Rotor-Active Magnetic Bearings System
Chapter 6: Industrial and Civil Engineering
Experimental Research on Hysteretic Behavior of L-Shaped Columns with HRB500 Reinforcement
Numerical Analysis of Bearing Capacity to Q690 Tubular Joints Enhanced by Inner Annular Plate
The Static Analysis about Complicated-Welded on Tubular Rectangle-Joints
Study of Shear Deformation's Influence on Deflection of Continuous Composite Box-Girder Bridge with Corrugated Steel Webs
FRP Truss Bridge Construction Technology Research and Application
Dynamic Response Analysis for Space Grid Structure with Different Boundary Conditions
Research on Large-Scale Structure Analysis Considering Time Effect and Route Effect (I): Theory
Study on Dynamic Response Test of Long Span PC Girder Bridge under the Operating Conditions
Unit Type Curtain Wall Mullions to Strengthen the Design and Structure Calculations
The Discussion and Analysis of Light Steel Residential Envelope Structure Energy-Saving Materials
Analysis Floor Failure Characteristics of 7122 Working Face in the Qinan Coal Mine Based on the Plasticity Theory
Seismic Analysis of Fly Ash Plate Sandwich Polyurethane Insulation Composite Wall
Chapter 6: Industrial and Civil Engineering
Static Fatigue Experimental Research on Orthotropic Deck with Composite Pavement Layer
Analysis on Dynamic Failure of Steel Cable-Stayed Double-Layer Grids under Strong Earthquake
Nonlinear Dynamic Analysis Model for RC Shear Wall
Numerical Analysis of Fire Behavior of Reinforced Concrete Frame Structure
Stress Impact Analysis of Steel Frame with Different Beam-Column Connection Mode
Shaking Table Test on Seismic Response of Isolated Bridge
The Elastic-Plastic Analysis of Functionally Graded Plate
Restoring Force Models Investigation of Research Status and Problems Analysis of RC Structure
Experimental Research on Static Behavior of Stiffened Square Concrete-Filled Steel Tubular Columns Subjected to Axial Load
Application of Prestressing Technology for Strengthening Space Grid Structure
The Detection, Identification and Structural Analysis of the Steel Structure Engineering
Stress Performance Theory and Experimental Comparison Analysis on Spatial Steel Pipe Truss Roof
Study on Internal Force Redistribution Caused by Uneven Settlement of Frame Structure
Force Cold-Formed Steel Residential System Performance Analysis
Dynamic Load Test Analysis for Continuous Steel Bridge
An Adjusting Method for the Suspender Force of Continuous Beam Arch Combination Bridge Based on Influence Matrix
Experimental Study of CFRP Confined RC Rectangular Hollow Section Bridge Piers
The Forecast Model to Carbonation Depth of Prestressed Track Beam of Light Rail
Second-Order Effects of Shanxi Tall Steel Framework Sway
Comparative Experiment Research on Mechanical Performance between Sintered Hollow Block Infilled Insulation Masonry and Sintered Perforated Brick Masonry under Vertical and Horizontal Load
Research on Horizontal Displacement and Torsion Coupling Effect of Structure-Soil System
Damage Detection in Beam-Type Structures Using Fractal Dimension Trajectory of Rotated Higher Vibration Modes
The Static Impact Analysis of a Blast Furnace Equipment Load on the Structure in Taiyuan
Theoretical Analysis Research on Story Drift Limit for Steel Rinforced Concrete Composite Structures
Mechanical Behavior of Steel Arch Bridge with Outward Inclined Ribs
A Finite Element Method with Six-Node Isoparametric Element for Nonlinear Analysis of Cable Structures
Monitoring and Evaluation on Girder Alignment of Suspension Bridge Based on MATLAB
Research of Loop Pre-Stress Tension Test for Cable-Stayed Bridge Pylon Based on Full-Scale Sectional Model
Research on Large-Scale Structure Analysis Considering Time Effect and Route Effect (II): Engineering Example
Research on Calculation Formula of Retaining Wall for Structural Reliability Program Design
Study on Stresses Distribution Pattern of Wide Box Steel Girder of Arch Bridge
Finite Element Analysis on Orthotropic Deck with Composite Pavement Layer
Study on Shear Behaviour of Concrete Beams Prestressed with External CFRP Tendons
Prestress Force Effection on Natural Frequencies of Simply Supported Beams
Programme Design of Precast Shear Wall Structure Seismic Performance Experiment
Finite Element Analysis about Temporary Bracing of Prefabricated Column of Prefabricated Structure
Lateral Stiffness Optimization in Structural Scheme Design of a Super High-Rise Building in 0.30g Seismic Fortified Regions
The Numerical Simulation of Moisture Transportation in Unsaturated Concrete of Underwater Tunnel
The Research for Cylinder Pressure and Penetration Method in Comprehensive Testing Mortar Strength
Mechanical Performance of Timber Beams Reinforced by FRP Sheets
Analysis on the Mechanical Behavior of the Pile Base of Integral Abutment Skew Bridge
Nonlinear Finite Element Analysis of Adaptive-Slit Shear Walls
Analytical Model on the Bond Stress-Slip Relationship between Steel Reinforcement and Concrete for RC Beam-Column Joints
Triaxial Test and Numerical Analysis on the Fiber Reinforced Laterite Clay
Fatigue Life Prognosis of Concrete Using Extended Grey Markov Model
Super Arch Dam Seismic Generalized Damage
Refinement of an Ultimate Strain Model for Circular Concrete Columns Retrofitted with FRP Based on a Most Comprehensive Test Database
The Effect of Interfacial Cracks on the Concrete Chloride Diffusion Coefficient Considering Aggregate Shape
The Two-Stage Design Method of Isolated Structures Based on New Code for Seismic Design of Buildings
Research on Corrosion Resistance Properties of Post-Tensioned Prestress Duct Grouting
Three-Dimensional Analysis of Excavating Face Stability Supported by Pipe Roof
Experimental Study on Reinforcement of Failure Reinforced Concrete Beams
Impact Analysis of Geogrid Node Size in Stretch Forming
Study on Dynamic Failure Behaviors of Steel Doble-Layer Grids (42X42m) Supported by Circumjacent Steel Columns Used in a Gymnasium under Disaster Earthquake Action
Finite Element Analysis of the Precast Shear Walls
Study on the Strength Properties and Failure Mode of Recycled Sludge Lightweight Soil
Anisotropy Gas Reservoir Drainage Radius and Quantitative Well Interference Study
Numerical Simulation of Intra-Explosion in Multilayer Medium
Research and Applications of a Plane Embedded Combined Element Model Considering Bond and Slip
Effect of Random Material Parameter in the Shell Structures
In Situ Test of Cohesive Strength on the Interface Zone between Mortar and Aggregate in Concrete
Seismic Response Analysis on RC Frame Strengthened with Viscoelastic Damper
Recent Development of Self-Centering System for Seismic Design of Bridge Piers: Experimental and Theoretical Investigation
Structure Health Monitoring System of a Noval Steel-Free Cable Stayed Bridge
Analysis of Nonlinear Dynamic for Piles under Earthquake Loading
Cyclic Behaviour of GFRP and Lateral Ties Confined Polyolefin Fibre Reinforced Concrete under Axial Repeated Compression
Q3 Loess-Like Silt Bearing Capacity of Foundation Partition Statistical Analysis in the Shanxi Yuncheng
Study of Frost Resistance of 50 Years Concrete Exposed to Saline Areas
Theoretic Analysis for Composite Elastic Modulus of Concrete-Filled Rectangular Steel Tube Member
Numerical Analysis of Composite Soil Nailing Retaining Wall under Earthquake
Finite Element Analysis of Steel-Shotcrete Composite Using the Fiber Beam-Column Element
A Developed Strength Model for FRP Confined Circular Concrete Columns Based on a Most Updated and Comprehensive Test Database
The Effects of the Rubber Bearing on the Seismic Performance of the Aqueduct-Water Coupling Structure
Turnover Experimental Research on Anti-Slipping Performance of Steel Pipe Joints with Swivel Coupler
Spillway Design for Zuocun Reservoir Danger Control and Reinforcement Project
Stability Analysis of Side Slope under Normal and Rainfall Conditions
Seismic Response Analysis of a Large Span Bridge with Inconsistent Inputs
FLAC3D Simulation for Dynamic Response of the Western Slope in Buzhaoba under Explosion
Solutions of Technical Problems in Ultra-Soft Soil Improving Projects
Vertical Motion Inputs for Seismic Analysis of Large Span Bridge
Effect of Ground Motion Characteristics on Seismic Response of Large Span Bridge
The Experimental Research on the Bag-Grouting-Pile Composite Foundation in Coastal Soft Foundation Treatment
Prediction of Residual Displacement of SDOF System from its Peak Inelastic Displacement
Probabilistic Characteristics of Residual Displacements of SDOF Systems
Slope Stability Analysis of Elastic Limit Equilibrium Method
Stability Analysis for Slopes of Maerdang Hydropower Station with the Three-Dimensional Limit Equilibrium Method
Calculation of Equivalent Damping Ratio to Concrete-Filled Steel Tubular Arch Bridge
Stress-Deformation Numerical Analysis of Clay Core Rockfill Dam Based on Duncan-Chang E-B Model
Analysis on the Discrimination Method of Seismic Liquefaction
Frost-Heaving Pressure on Lining of Tunnel Constructed in Severe Cold Regions
Study of Elastic-Plastic Sediments on Seismic Response of Concrete Dams
Seismic Behavior of Two-Story Brick Masonry Building
The Stability Analysis of a Slope under the Complex Conditions
Simplified Method of Isolated Structure Collapse Capacity Part, (I): Ground Motion Intensity Measure
A New Method of Fracture Designing to Elevate SRV in Natural Fractured Sandstone Reservoir
A Mathematical Model for the Pipeline Transportation of Soft Clay
Integral Anti-Slide Stability Analysis of RCC Gravity Dam
Stability Analysis of High-Filling Embankment Based on Nonlinear Finite Element Method
Analysis of Fissured Expansive Soil Slope Stability and its Reinforcement with Anti-Slippery Piles
The Experiment of Deformation and Internal Force of Soft Pipeline Caused by Subsoil Settlement
Deep Excavation Caused by the Impact of the Adjacent Buried Pipeline Destroy the Analysis
Analysis of the Deformation Field in the Direct Shear Test with Use of DPDM
Analysis and Research of Cement Mixing Pile in Soft Ground
Taiyuan Underground Pipeline Testing and Analysis of Deformation and Failure
Numerical Investigation on Passing through Goaf in Coal Mine Failurezone
Research of Embankment Dam Structural Safety
Spillway Design for Xiaoguo Reservoir Danger Control and Reinforcement Project
Rock-Concrete Joints Reliability during Building Process of Super Dam
The Seismic Analysis of an Exhibition in Shanxi
Influence of Concrete Tension Softening Properties on the Steel-Liner Reinforced Concrete Penstock
Coupled Numerical Simulation Research on Dewatering and Land Subsidence in Deep Foundation Pit
Seismic Design and Analysis of Tall Shear Wall-Frame Structure Using Viscous Damping Wall
Study on the Remediation of Mud-Pumping
Study on the Supporting Method of Crossheading in Shallow-Buried Coal Seams Working Face Using FLAC Simulation
Chapter 7: Other Topics
Chronology Research on Eocene Trachyte in Zoumaying, Sanshui Basin
The Influence Factors and Enhancement Measures of the Quality of Well Cementation in the Hai-La-Er Area
The Division of Zhangjiakou Formation of Later Jurassic at Jibei
A Sampling Method to an Inverse Scattering Problem for Stationary Schroedinger Equation
Advanced Materials
Chapter 8: Composites, Polymers and Biomaterials
Analyzing Resonant Frequency of 1-3-2 Piezoelectric Composite with Multi-Mode
Study on the Effect of WC Size on the Thermal Expansion Coefficient of WC/Cu Composites
Semi-Geodesics-Based Dome Design for Filament Wound Composite Pressure Vessels
Property Prediction of Composites with Different Fiber Volume Fractions by Representative Volume Element Method
Effect of TiC Intermediate Layers on the Thermal Conductivity of Copper/Diamond Composites
The Effects of Small System on the Type I Antifreeze Protein 'HPLC-6'
Modified Polymer Material Used for Oxidative Desulfurization of Diesel Fuel
Study of a Sound Absorbing Polyurethane Based on Porous Composite Material
Study on Rheological Properties of Sodium Alginate/Polyethyleneglycol/Molecular Sieve Composite System
Alginate-Based Multi-Membrane Hydrogel for Dual Drug Delivery System
Synthesis and Properties of Polyimides Containing Tert-Buty Group
Study on Hypolipidemic Activities of Safflower Seed Oil
Numerical Study on Effects of Interphase in Natural Short Fiber Reinforced Polymer Composite Based on Cohesive Zone Model
Cross Coupling Effect in Multi-Element Composites for Transducer Array Application
Detection of the Intermediates in Preparation of Ammonium Polyphosphate by Temperature Raising Rate Factor
Comparison of the Flame Retardant Properties of Ammonium Polyphosphates with Crystalline Forms II and V
Ionic Liquid 1-Butyl-3-Methylimidazolium Chloride/FeCl3 Pretreatment of Sugarcane Residue for Second Generation Bioethanol Production
Preparation of Friction Materials by Solution Mixing Based Palygorskite Nanometer/PF Composite Resin and Tribological Behavior of Four Kinds of Woven Friction Materials
Wear Process and Analysis of Lubrication Failure about Sputtering MoS2 Composite Solid Films Applied to Spacecraft
Acoustic Characters Study on the Influence of Micro-Fillings in Underwater Sandwich Composite Structure
Effect of Cu(Cr0.2Al0.8)2O4/TiO2 Composite Film Electrodes on DSSC Photoelectric Properties
Interface Parameters of Composite Materials with an Elliptical Cross-Section Fiber Bundle
Predictions of the Effective Elasto-Plastic Properties and Cohesive Strength of the Spruce Fiber Reinforced Polypropylene Composite
Preparation of Quercetin-Ni+2 Metal-Complexing Imprinted Polymer and its Recognition Performance Evaluation
Formulation and Evaluation of Novel Starch-Based Microspheres for Adsorption of Ascorbic Acid
The Properties of the Composites of Bamboo Flour and PVC
Preparation of Ammonium Polyphosphate by Melamine as Sole Condensing Agent
Fatigue Stiffness Degradation Behaviour of Woven Composite Joint
Study on the Tensile Damage Behavior of Self-Healing 2.5D-C/SiC Composite in Weft Direction
Chapter 9: Micro / Nano Materials
A Novel Simplified Model Approach for Fiber Modified by 1-D Nano Techniques
Synthesis of NiFe2O4 Nanoparticles and its Supercapacitive Properties
Morphology Control of SAPO-11 and SAPO-47 Crystals in the Presence of Diethylamine
Grafting Polymerization of D,L-Lactide on the Surface of Halloysite Nanotubes
Growth and Microstructure of Submicro-Scaled Graphitic Flakes on Carbon Fibers by Catalytic Chemical Vapor Deposition
Structural Evolution of Mechanically Alloyed Nanocrystalline Al70Fe25Ni5 Intermetallics
Synthesis of Three-Dimensionally Interconnected Hierarchical Meso/Mesoporous Tb3+ Doped Titania with Enhanced Photocatalytic Activity
Microstructures and Electrocatalytic Properties of Nitrogen Doped Graphene Synthesized by Pyrolysis of Metal Tetrapyrazinoporphyrazine
Experimental Research on Mechanical Characteristics in the Process of Nanoscale Sliding Contact
Synthesis and Characterization of Neodymium Zirconate Nanocrystals Doped with Aluminium Ions by a Salt-Assistant Combustion Method
Morphology Transition of Diblock Copolymer with Nanoparticles Confined in Cylindrical Nanopores
Dispersion of Multi-Walled Carbon Nanotubes Modified with Poly-L-Lysine in Water
Preparation and Properties of Carbon Nanotubes Reinforced Cu Matrix Composites for Electronic Packaging Application
Preparation and Characterization of Aligned Carbon Nanotube Fibers
Fabrication of WO3 with Macroscopic Structures via CNFs Template
Computational Study of Thermal Stabilities of Cu Nanorods at Atomic Scale
The Electrical Potential Distribution in the Hetero Structure during the Growth of the Electrodeposition Nano
The Local Defect Effect on Molecular Local Density State in Carbon Diamond Structures
Effect of Ni Addition on Formation of Nanocrystalline Phase during Mechanical Alloying of (Fe Al)-40(60) at.% Ni and (Fe Al3)-10(30) at.% Ni Powders
Electrochemical Synthesis of Copper Sulfide Nanostructure with PAM Hydrogel Template
Ag Nanoparticle Functionalized TiO2 Nanowire Thin Film and its Gas-Sensing Application at Room Temperature
Chapter 10: Steel, Alloys and Coating
Effects of Stress Amplitude on Fatigue Behavior of Extruded Mg-3Al-2Sc Alloy
Study on Dynamic Recrystallization Behavior in Deformed Austenite of 52100 Steel by Using JMAK-Model
Atom-Rich and Defect Effects on Electronic Structure and Magnetism in Co2MnGe/MgO Heterojunction
The Abnormal Deformation Behavior of B340/590 DP Steel at Elevated Temperature
Influence of RE Elements on Corrosion Rust Layer of Low Carbon Steel in CSP in Simulated Coastal Atmosphere
Microstructure of TC21 Titanium Alloy after Superplastic Deformation and Heat Treatment
Dynamic Tensile Behaviour and Full Field Strain Measurement of High Strength Steel
Property Study on High-Speed Steel Deposited TiN Coatings by Magnetron Sputter Ion Plating
Experimental Study on the Forming Limit Diagram of QP980 under Variable Pressing Velocities
Study of Metallurgical Properties in the Sintered Ore with Variable SiO2
Investigation on Behavior of the early Stage of Aging in C17200 Alloys
Effect of Tungsten Addition on Microstructure and Mechanical Properties of TiAl-Based Alloy
Analysis on Affecting Factors of Slab Surface Transversal Corner Crack for Medium-Carbon Steel with Boron in Continuous Casting
Calculation of the Mg-Gd-Y Alloy Equilibrium Phase Diagram and its Verification at 450 DegreesC
Study on the Critical Damage Value and Processing Map of AZ80 Magnesium Alloy Forming at Elevated Temperatures
The Improved Friction Properties of Bonded MoS2 Films by MAO Treating of Al Substrate
Chapter 10: Steel, Alloys and Coating
Mechanical Properties of WC-Co Cemented Carbide Prepared via Vacuum Sintering
Preparation of Bromine Carbon Alkyd Resin Retardant Coatings for Steel Structure
Optimized Wire Bonding Process on Micro-Connection Pad with Ni/CeO2 Coatings
Preparation and Hydrogen Storage Kinetics of Nanocrystalline and Amorphous Mg2Ni-Type Alloys
Preparation of Infrared Stealthy Coatings
Chapter 11: Optical/Electronic/Magnetic Materials
Investigation on the Optical Performance of Co and Al Co-Doping ZnO Films
Properties of N-Doped ZnO Films by RF Magnetron Sputtering
TEM Study of FePt and FePt:C/FePt Composite Double-Layered Thin Films
Synthesis and Characterization of CdTe Quantum Dots Capped by N-Acetyl-L-Cysteine
The Influence of Electrochemical Anodization for Porous Silicon Microcavity Fabrication
Substrate Temperature Effects on the Structural and Optical Properties of TiO2-Doped ZnO Films for Organic Photovoltaic Devices
Research on Accumulation PMOS Capacitors Based on Strained-Si/SiGe Material
Absolute Luminous Flux and Quantum Yield of Sm3+-Doped Cadmium-Aluminum-Silicate Glasses under the Pumping of Blue Light Emitting Diode
Mixed State Hamiltonian Element for Plane Transversely Isotropic Magnetoelectroelastic Solids
Effect of High-K Material on Gate Threshold Voltage for Double-Gate Tunnel FET
Improvement of the Absorbing Properties of Single Layer Microwave Absorbing Materials via Frequency Selective Surface
Performance Study of the Anti-Scatter Grid for Sub-Megavolt X-Ray Flash Radiography
Effect of Compaction on the Surface Morphology of CuInSe2 Thin Films
Thermodynamic Properties and Optimized Fiber-Drawing Condition in Germanium Tellurite Glasses
The Study on Surface Morphology and Residual Stress of Al2O3 Film
Synthesis and Surface Photoelectric Properties of a Trinuclear Chromium(III) Complex
Hydrothermal Preparation of Flower-Like CuS Superstructure and its Optical Property
Investigation on the Properties of Sb-Doped CdTe Thin Films
Characterization of Defects in Gallium Nitride Thin Films by SEM
Chapter 12: Building Materials
Study on Anti-Sliding Performance of Asphalt Pavement with Mafilon Thaw Material
Experimental Research of Foaming Concrete Performance with Different Blowing Agent
Experimental Research of Foaming Concrete Performance with Different Fly Ash
Low Strength Self Compacting Concrete Compressive Strength Test
Short-Term Ageing Influence on the Creep and Recovery Characteristics of Asphalt Binders
Experimental Study on Work Performance of Waste Rubber Concrete
Experimental Study on Frost-Resistance Property of Waste Rubber Aggregate Concrete
Research on Thermal Performance of the Wall Systems of Steel Public Buildings
Compressive Strength and Flexural Properties of High Performance Nano-Binder Cementitious Composites
Fully Graded Concrete Creep Models and Parameters
Pore Characteristics of Pavement Concrete with Nano-Particles
Experimental Study on Expansive Concrete Filled Steel Tube
Hydration Activity of Silica Fume and its Effect on the Structure of C-S-H Gel
Damage of Cement Paste in Sulfate Environment with Different Temperature and Drying-Immersion Cycles
Experiment Research on Plastic Strength of Grouting Materials of Desulfurization Denitration Ash
Effects of Warm Mix Asphalt (WMA) Additives on the Properties of WMA Mixtures
Study on Heat Conductivity Coefficient Value of Thick-Typed Fireproofing Coating for Tunnel at Elevated Temperature
Research on Barite Concrete Mixed with Fly Ash
Numerical Analysis for Drying Creep Behavior of Self-Compacting Concrete
Application of Cement Stabilized Blast Furnace Slag Material in Road Base Project
Effect of Slate Powder on Alkali Activity of Slate Aggregate
Analysis of Phosphogypsum's Physical and Chemical Properties and Making of Anhydrite Cement from Phosphogypsum
Effect of Initial Curing Conditions on Thaumasite Form of Sulfate Attack of Cement Based Materials
Chapter 13: Material Processing Technology
Analysis of Fused Magnesia Production Process with 3000kVA Electric Arc Furnace
Effect of Different Heat Treatments on Microstructure and Mechanical Properties of Steel Containing Ni of 9% Base and Weld Metals
Finite Element Analysis of Wear in Piercing
The Viscosity Model of Ti-6Al-4V Feedstocks in Metal Powder Injection Molding
Analysis of the Influence of Bar-Defects to Warping of PMMA Products
Effect of Extrusion Size on Forming Process in Equal Channel Angular Pressing
Effect of Isothermal Forging on Microstructure and Mechanical Properties of TiAl-Based Alloys
Moisture Absorption Finishing of Polyester Fabric
Periodic Nano-Structure Formation with Femtosecond Laser Ablation and Patterning of Silicon
The Analysis of Ceramic Cutting Tools Durability in Machining Process of Steel C60 Applied According to Standard ISO 3685
Establishment of Constitutive Equation of Tube in Hydroforming
The New Technical Research on Joining Veneer
Combining Recovering Iron with Activating the Residual Slag Process for Electric Arc Furnace (EAF) Slag
Mold Temperature Influence on Tensile Strength and Fiber Orientation of Plastic Parts in Dynamic Mold Temperature Injection Technology
3D Coupled Thermo-Mechanical FE Analysis of Surface Defects in Continuously Casting Slab
Fabrication of Ni-Base ODS Alloys via Reactive Ball Milling
The Influence of Inorganic Carbon on Anaerobic Ammonia Oxidation
New Experimental Expression of Durability Dependence for Ceramic Cutting Tool
A Study of Stabilization and Recycling for Aluminum Dross
Parametric Study of Swage Ball for Hard Disk Drive Swaging Process Using Finite Element Method
Study on Length of Cartridge how to Affects Cutting Capability of the Combustion Cutting Ammunition
Process Improvement of Camshaft of Heavy Duty Diesel Engine
The Deposition Methods of CsI and Ni Tubes in the AAO Template
Thermodynamic Analysis of the Shock Compaction of W/Cu Granular Mixture Based on the Mesoscale Simulation
Study on Promotion of Surfactant on Gas Hydrate Formation
Nanowelding Technology Study Based on Simulation Methods
Research on Oxygen Embrittlement Phenomenon of Interface of Titanium/Steel Explosive Welding Laminates
Analysis for Force in a New Method of Lapping Brake Pump Master Cylinder
Analysis of Wire-Line Coring Hydro-Hammer Technologies in Xiaoqinling Gold Ore Deposit
Experimental Investigation on Hybrid Technology of Ultrasonic Vibration Assisted Chemo-Mechanical Grinding (CMG) Silicon Wafer
Drilling Technologies of Golden Ore District at Victoria Lake in Tanzania
The Process of Sol-Gel Method Prepared Bi-2212 Superconductors Tapes
Thermodynamics and Phase Constituents of Laser Induced In-Situ-Fabrication of TiB2 Ceramic Coating on Ti-6Al-4V
Research Progress of the Methods of Acid Mist Suppression
Direct Preparation of Tantalum Metal from Ta2O5
Study on the Influence of Ultrasound Impacting to the Properties of 16 Mn Welded Joints
The Influence of Oxide-Salt Ratio on Crystallization of Lu2Ti2O7 Phase from Molten Salt
Research of Machining Error Causes and Solutions
Biodegradation of Styrene Vapor in a Biofilter
Copper Absorption by Glass Derived Hydroxyapatite Scaffolds Prepared by Dipping with Polymer Foam
Facile Synthesis of Dye Waste-Calcium Fluoride Hybrid Absorbent and Application to Dye Wastewater Treatment
The Research of the Green Buffer Packaging Materials for the Small Pieces of Express Items
Recognition of Coal and Gangue Based on X-Ray
Chapter 14: Other Topics in Materials Science
Effects on Morphology Change on the Mg-Doped Zinc-Oxide Surface Measured by Changing the AFM Feedback Speed
First Principle Study of Hydrogen Storage
A Mn(II) Metal-Organic Framework Constructed from a Tetrahedral Silicon-Cored Ligand
Review of Materials for Energy Saving Technology
LiFePO4/Li Batteries with Mixtures of Carbonate and Ionic Liquid [EMIM]+[TFSI]- as High Properties and Safety Electrolyte
A RC Model for Facilitated Transport in Asymmetric Membranes with Fixed Site Carriers
The Effects of Electrolyte on the Aluminum Laminate Foil and the Lithium Ion Battery Corrosion
Oxygen Permeability of Ba0.5Sr0.5Co0.8Fe0.2O5+ Membrane after Surface Modification
Synthesis and Spectroscopic Properties of Novel Chiral Amino Acid Tailed Porphyrins
Catalytic Oxidation of Toluene over Metal Oxides Supported on Fiber Material
Analysis of Trace Elements in Roughage by ICP-AES
The Fundamental Characteristics on Particle Size Distribution of Drilling Rock-Cuttings
Other Related Fields of Engineering Science
Chapter 15: General Mechanical Engineering
A Study on Optimum Calculation of Partial Transmission Ratios of Coupled Planetary Gear Sets
Ship Form Optimization of 62-Feet Yacht and Analysis of Performance
Feasibility Analysis of Application of Low-Temperature Radiation Electric Heating System
Analysis on Dynamic Piezoelectric Coupling Characteristics of PZT-4
Improved Plastic-Al Pipe Based System for Refrigeration of Energy Existed in Urban Sewage
Optimal Design of Highway Piezoelectric Generators
Hardware-in-the-Loop Simulation Research on Driving System of Hybrid Electric Motorcycle
Dynamic Modeling and Simulation of the Basic Shaft Bearingless Motors
Prediction Model of Centrifugal Fan Performance Based on BP Neural Network
Research on Wire-Plugging Robot System Based on Machine Vision
Modeling and Simulation Analysis of Certain Vehicular Gatling Gun
Digitalized Design of Upward-and-Downward Adjusting Mechanism of Automobile Seat
Flue Gas Turbine Fault Analysis and Improvement Measures
A New Memristor Based Chaotic System
Study of the Hydraulic Synchronous Circuit and Synchronous Control of the Hydraulic Hoist
The Study of LED Lighting Color Temperature and Visual Effect
Chapter 16: Control and Information. Computer in Engineering Research and Design
The Application of RFID in Cigarette Warehouse Logistics
Based on the Ant Colony Algorithm TSP Optimization Simulation
With Random Parametric Equation of Circle Inscribed Polygon Generation Algorithm and Analysis
Introduction of Quantum Cryptography
Study on Quantum Key Distribution
Research of Provincial Forest Fire Emergency Resource Management Platform
Four Band Cardinal Orthogonal Scaling Functions and Wavelets in Higher Dimensions
Laser Profile Scanner Application for Micro Part Detection
An Improved FOCUSS Algorithm in the Presence of Noise
Point Cloud Process of Laser Scanning with a Mathematical Noise Model
Research on an Automatic Measurement System in Wheelset Parameters
Cast Shadow Removal in a Real-Time Environment
Verification Mechanism for Online Responses in Criteria Prioritization
Research on Intelligent Flowmeter Calibration Software System Design
Master-Slave Global Synchronization for Froude Pendulums via Linear State Error Feedback Control
Review on Certain Group Planning Domain of IPC
A GA Approach for Damage Localization Using Scattered Lamb Wave
MPI+OpenMP Hybrid Parallel Algorithm Performance Research on Two-Dimensional Compressible Flow Field Simulation
A Hybrid Optimization Based on GPU Parallel Computing Method and its Application of Three Dimensional Large Eddy Simulations
Research of Ontology Based FPBS Design Model
Existence and Stability of Periodic Solution for Impulsive Hopfield Cellular Neural Networks with Distributed Delays
Determining Side-Cores of Plastic Moldings
The Analysis and Improvement of Inverse Problem Simulated Annealing Algorithm about Concrete Temperature Field
Discussion of the Construction Design Methodology Considering both Evolutionary Structural Optimization and 3D Printing Technology
A Neural Network Model for Evaluating Gravel Liquefaction Using Dynamic Penetration Test
Three-Dimensional Modeling of Open-Pit Based on AutoCAD and its Application
Using Interpolation Points to Rectify Cutter Paths of Five-Axis Machining
Automatic Side-Cores Construction in Injection Plastic Mold Design for Free-Form NURBS Surface Models
Starting Energy Dissipation of Traffic Flow with On-Ramp
Robust Quantized Guaranteed Cost Control
Research on Minimum-Cost-Based Task Decomposition Model of Multiple Expert Systems for Oil-Gas Reservoir Protection Based on Agent
Adaptive Consensus of High Order Multi-Agent Systems with Unknown Nonlinear Dynamics
1D and 2D Coupled Numerical Model for Flood Control in Middle Reach of Huaihe River
Symmetric Multiwavelet Frames with General Composite Dilation in Higher Dimensions
Three Remodeling of the Optical Nerve Head Including Retinal Blood Vessel Based on Live Animal Experiment
Equivalent Load Identification Algorithm Based on Least-squares in Frequency Domain
Chapter 17: Engineering Management in Industry and Society
Indicators and Methodologies of Energy Efficiency in China
How Internet Channel Promotions Work Together Based on a Weakest Online Manufacturer? From the Dual Markets Capacity Optimization Perspective
Research on Low-Carbon Development of Energy Mix in Shaanxi Province Based on System Dynamics
Study and Identify on the Best Reserve Quota of Maintenance Spares
Reflection of the Teaching Reform of Environmental Art Design
The Study on Integration of Supply Chain Based on the Symbiosis Theory
The Study of Supply Chain's Symbiotic Relationship Based on CPFR - In Case of Food Industry
Fuzzy AHP Applying in the Material Management of Construction Project
A Worldwide Comparison of Water Use Efficiency of Crop Production
Tourism in China: A Study of its Impact on Economy, Culture and Society
Relief Effort and Reconstruction after Wenchuan Ms8.0 Earthquake
Study on Discriminant Criterion of Highway Landslide Disaster
Failure Reasons and Support Countermeasure of Intersecting Roadwayss in Deep Soft Rock
The Urban Sprawl and Urban Planning in Haikou
Study of the Construction Plan Bid Assessment Method of the Coal Mine Project Based on Entropy-Weight Method
Study on Water Resource Protection and Pollution Prevention of Mining Area
Impact of Residential Real Estate Development on Green Construction
The Planning and Design of the Modern Residential Area from Green Building Perspective: Taking Chengxi Project of Taiyuan as an Example
Comprehensive Treatment for Shallow-Buried Mined-Out Area in Coal-Mining Region of Western China
Study on the Criterion of Discriminant on Highway Collapse Disaster in Mountain Area
Ecological Design Strategies of Vernacular Architecture in Shanxi, China
Regional Evaluation of the Transportation Infrastructure Construction Level in China
Coal in China
Efficiency Comparison in Chinese Construction Industry Based on Data Envelopment Analysis and Super Efficiency Data Envelopment Analysis
On Interior Greening Decoration of Residence
Research on Geological Tourism Resources of Lingchuan-Wangmangling National Geopark
Seismic Damage Investigation on Buildings of Qingchuan County in Wenchuan Earthquake
Research on Fairway Condition for Safety Navigation in Bridge Waters
Analysis of China's Inland Navigation Standards
Analysis on Navigation Reliability of Curved Channel
Analysis of the Surface Soil EC Dynamics and the Economic Benefit under the Subsurface Drainage System
by "Nielsen BookData"
