Advanced materials and engineering materials II : selected, peer reviewed papers from the 2nd International Conference on Advanced Materials and Engineering Materials (ICAMEM 2012) : 16-17 December, 2012, Beijing : 29-30 December, 2012, Shanghai
著者
書誌事項
Advanced materials and engineering materials II : selected, peer reviewed papers from the 2nd International Conference on Advanced Materials and Engineering Materials (ICAMEM 2012) : 16-17 December, 2012, Beijing : 29-30 December, 2012, Shanghai
（Advanced materials research, v. 683）
Trans Tech Publications, c2013
- : pbk
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The Aim of ICAMEM2012 was to present the latest research and results of scientists related to advanced materials and engineering materials topics.
The papers are grouped as follows:
Chapter 1: Advanced Materials and New Materials;
Chapter 2: Engineering Materials Research;
Chapter 3: Materials Processing Technology;
Chapter 4: Other Engineering Solutions for Manufacturing.
目次
Preface, Committees and Sponsors
Chapter 1: Advanced Materials and New Materials
Blue Upconversion Luminescence from Phosphor Tm3+/Yb3+ Co-Doped Gd2Mo3O9
Microstructure and Magnetic Properties of Fe-Si-Al Soft Magnetic Composite
Preparation and Purification Properties of Poly(Vinyl Alcohol) Nano-Fibers Based Sandwich Structure Material
Investigation for the Fracture Process of WCp/Cu Functionally Graded Materials under Three-Point-Bending
Properties and Performance Analysis of Woven Roving Composite Laminates for Automotive Panel Board Applications
Study on Synthesis of Cyclotriphosphazene Containing Aminopropylsilicone Functional Group as Flame Retardant
Synthesis of SiO2/CeO2 Nanopaticles with Core/Shell Structure and Their Polishing Performance
Design, Synthesis and Biological Activity Evaluation of Novel N-Acylation Substituted Isatin Derivatives
TiO2 Immobilized in RPF-AA Fiber for Photocatalytic Degradation of Low Concentration Methylene Blue in Aqueous Solution
Study on the ZnO-B2O3-SiO2 Glass-Ceramic with DTA, XRD and SEM
A Review on the Methods of Improving Fiber Distribution of Engineered Cementitious Composites (ECC)
The Influence of Tread Material Oil Aging on Tire Performance
Room Temperature Magnetocaloric Effect of the Cox(MnSb)1-x Compounds
Microstructure and Electrochemical Behavior of Sm0.5Sr0.5CoO3 Deposited by Solution Precursor Plasma Spraying
Characteristics of BiFeO3 Thin Films on a LaAlO3Substrate by RF Sputtering
Magnetic Concentration Phase Transitions in Ultrathin Films
Synthesis and Characterization of Surface Modified Red Pigment 48:2 for Electrophoretic Display
Relationship between Life, Load and Rotation Speed of UHMWPE Bearing under Dry Rolling Contact Fatigue
Mechanical Properties at High Temperatures and Microstructures of a Nickel Aluminum Bronze Alloy
Effect of PTFE Retainer on Friction Coefficient in Polymer Thrust Bearings under Dry Contact
Sintering and Dielectric Properties of Sr-Rich Barium Strontium Titanate (BST) Ceramics Fabricated by a Mixed-Phase Method
Application of Photocatalytic Concrete Paint and its Effect of Decomposing Vehicle Exhaust
Phase-Change Materials and Building Energy Saving
Second-Order Non-Linear Optical Properties of Y-Type S-Triazine Based Derivatives
Developing a Wearable Multifunctional Composite Component
Effect of Dynamic Strain Aging on the Mechanical Performance in Ti/STS439 Clad Materials
Preparation of Carbon Fiber Reinforced SiC Matrix Composites by PIP Process
Interfacial Microstructure of Diffusion-Bonded Cu/Cu-Ag/Al Hybrid Alloy
Effect of Size on Average Molecular Weight of Poly(Methyl Methacrylate) Micropattern during Hot Embossing
Mechanical and Biological Characteristics of Electrospun PCL Meshes - the Influence of Solvent Type and Concentration
Evaluating the Properties of an Alginate Wound Dressing for Skin Repair
Ageing Effect on Mechanical Properties of Machined Nanostructures
Density Functional Theory Studies of Substitutionally Si-Doped Single-Walled Carbon Nanotubes
Synthesis of SnO2 Nanotubes as High Performance Energy Storage Material for Photocathodic Protection of Metals
Surface Morphology in Milling Multidirectional Carbon Fiber Reinforced Polymer Laminates
Studies on the Bioceramic Coating on Titamium Substrate Including Silicon and Calcium by Micro-Arc Oxidation and Osteoblast's Adhesion and Proliferation on the Coating
PCL and PCL/PLA Scaffolds for Bone Tissue Regeneration
Quantum Cutting Downconversion in Tb3+,Yb3+ Codoped Sr3AlO4F Phosphor
Elastic Ply Damage Mechanics Modeling of Glass/Epoxy Laminated Composite
Chapter 2: Engineering Materials Research
Investigation on Transmittance and Uniformity of Light Diffuser Plate of Filling Coefficient of Microstructure
The Yield Effect on Soil Improver and Straw Mulch Coupling in Inland Saline Areas
Application of HVFA Concrete in Massive Structure
Luminescence Properties and Energy Transfer from Eu2+ to Tb3+ in Sr5(PO4)3F Phosphor
Synthesis and Characterization of SrSO4:Sm3+ Phosphor with Hierarchical Structures
Design and Analysis of Optical-Communication-Band Sub-Wavelength Grating Polarizer
The Effect of Spin-Orbit Coupling on the Electronic Structures and Half-Metallicity of Heusler Compounds: V2ReZ (Z=Al, Ga, ln)
The Effects of Initiator Content on Sago (Metroxylon rottb.) Starch-G-PAN Hydrogel
Study on the Hydrolysis of Pollen in Pure Water under Microwave Irradiation
Study on a Structure of 2,6-Pyridine-Dicarboxylic Acid Lead, Pb(C7H3NO4)
Application and Research on Luminescent Coating in Interior Design
Microstructure and Texture Characterstics of a Near-Alpha Titanium Alloy Tube
Characterization of Contact Resistance between Carbon Nanotubes Film and Metal Electrodes
Analysis of the Effect of Temperature on Thermal Conductivity of the Insulation Block Made from Secondary Raw Materials
Experimental Investigations on the Characteristics of Biomass and Coal-Biomass Fuel Briquettes
Medium Optimization for Active Substance Production of Streptomyces alboflavus TD-1 Using Response Surface Methodology
Molecular Weight and its Distribution of PET Depolymerization Catalyzed by Zn(Ac)2 under Microwave Irradiation
Experimental Research on Properties of Low-Density Foaming Concrete
Numerical Simulation and Monitoring of Mass Concrete Wall Temperature Field
Photo Polymerization of Thiol-Hyperbranched Polysilazanes
In Situ Modulation Excitation IR Study on the Dominant Product of Pt-Catalyzed Aromatic Ketone Hydrogenation
Numerical Simulation of the Transient Temperature Field during Gas Quenching
Synthesis of sp3C1-Bridged Constrained Geometry Complexes and their Application for Copolymerization of Ethylene and 1-Octene
Rheological Properties of Polysulfonamide Spinning Solutions with Higher Ratios of p-Phenylene Segments
Optimization of Micro-Arc Oxidation Electrode Structure by Finite Element Analysis
The Study on the Synthesis and Luminescent Properties of the Phosphor La2O3: Dy3+
Investigation of Hot Deformation Characteristics of AISI 4340 Steel Using Processing Map
Synthesis and Electrochromic Properties of Crystalline 3D Urchin-Like Nanostructures
Cyclic Stress-Strain Response and Dislocation Configuration of a Beta Phase Containing TiAl Alloy during Isothermal Fatigue Tests under Different Strain Rate
Mechanical Properties and Microstructure of Cu-Ni-Zn/Cu-Cr/Cu-Ni-Zn Clad Plate Processed by High Pressure Torsioning (HPT)
Solvothermal Synthesis and Detailed Analysis of Hydroxyapatite Nanostructure
Research on the Electro-Exploding Mechanism of Semiconductor Bridge
Wear Resistance of Graphite / Aluminium Composites that Prepared by Stirring Casting
Coordination of Polyacrylic Grafted Polytetrafluoroethylene Fiber with Fe (III) Ions in Aqueous Solution
Adsorption of Zearalenone by Montmorillonite
Molecular Dynamics Simulation of Structural Changes of Ag965 Clusters during Freezing
Study of the Erosion-Corrosion Behavior of P110, N80 and VM140 Steel in 3.5wt.%NaCl Solutions with Sand
Crystal Structure of Ytterbium Chloride Phenanthroline: [YbCl4]*[C12H8N2]*(H2O)
Effect of Transition Metal on the Thermal Degradation of Cotton Cellulose Modified with THPC
Analysis on the Non-Arrhennius Life Prediction Method of Rubber
The Application of Large Particle Size Hot Mix Asphalt Macadam Roadbase Structure in the Maintenance Overhaul Engineering
Magnetic Dual-Phase State of Superparamagnetic Particles in the Field of Mechanical Stresses
Experimental Study on Bonding Interface between CFRP and Concrete under Fatigue Load
Observation of Wear on PEEK-PTFE Hybrid Radial Bearings
Surface Profile Observation of PTFE Thrust Bearings under Rolling Contact Fatigue in Water
Study on the Flow- Induced Corrosion of P110 Oil Tube with an Electrochemical Method
Experimental Research of Foam Concrete with Different Fly Ash Level
Research Status and Prospect of Constitutive Relation for Concrete after Freeze-Thaw Damage
Surface Morphology Investigation of Poly(ether ether ketone) Immobilized with Heparin and Bovine Serum Albumin
Analysis of Relationship between Porosity and Roughness of Surface Based on Fractal Model
Two Dimensional Photonic Crystal Biosensors
Flex Fatigue of Side Emitting Optical Fiber
Experimental Research of Foaming Concrete Performance at Different Water Temperature
Experimental Research of Foaming Concrete Performance with Different Ash Calcium
Influence of Load and Rotation Speed on Life of PPS Radial Bearings under Water Lubricant Conditions
Environmental Assessment of Production of Thermal Insulation Block from Secondary Raw Materials
Chapter 3: Materials Processing Technology
Research on the Super Rapid Strength Repairing Material Effects Resistance to Water Damage Performance of Cement Stabilized Macadam
Isothermal Transformation of Wustite for Low Carbon Micro-Alloyed Steel
The Research of the Application of Smart Coatings on Architectural Ornaments
Effects of Niobium and Titanium on the As-Cast Microstructure of Cr8Mo2VSi Cold Work Die Steel
Research on Sol-Gel Transition Process of Gelatin
Feasibility Study for Copper/Zirconium Oxides as Oxygen Carrier in Chemical Looping Air Separation (CLAS)
Study on the Preparation and Catalytic Property of Sulfonated Ordered Mesoporous Carbon
Research on Dynamic Recrystallization Behavior of 20CrMo Alloy Steel during Hot Deformation
Meshless Modeling of the Breakage Process of a Coal Prism within Vertical Roller Mills
Development and Application of Prediction Model for End-Point Manganese Content in Converter Based on Data from Sub-Lance
Effect of Sb Substitution on the Crystal Structure and Multiferroic Properties of BiFeO3
The Pozzolanic Activity of the Coal Gauge and its Evaluation
Effect of Feedstock Type on Microstructure and Polarization of Plasma Sprayed LSM Cathode for Solid Oxide Fuel Cells
Preliminary Research on Brazability of SiC Particulate Reinforced Aluminium-Based Composites
The Impact of Porphyrin Meso-Position Steric Effect on Porphyrin Density on TiO2 Surface of DSSC
Calculating of the Beating-Up Force for 3D Weaving
Kinetics and Thermodynamic Investigation of Phosphate Adsorption on AlCl3 Modified Palygorskite
Preparation of Hydrotalcites Derived Ni/Co/Cu/Fe Nanocomposite Oxides and their Catalytic Activities for Thermal Decomposition of Ammonium Perchlorate
The Research of Konjac Glucomannan Fracturing System
OPTIMALMOULD | Cooling System Influence in Injection Moulding Cycle Time Optimization
Finite Element Simulation on Tire Rubber Extrusion Process
Influence of Forming Velocity on Service Performance of Resistance Wall Structural Die
Modeling and Simulation of High Speed Intermittent Cutting Based on the Finite Element Method
Choice of Materials and Application of New Materials in Industrial Design
Separation Test of Copper-Zinc-Sulfur Mixed Concentrate in Kazakhstan
Study on Melting Properties of CaO-Al2O3-SiO2-MgO System Calcium Aluminate Flux
Effect of Spark Plasma Sintering Temperature on Microstructures and Properties of Copper-Diamond Composites
Study on the Formation Mechanism of Micro-Arc Oxidation Layer in Aviation
Study on the Surface Roughness of Titanium Alloy Machined by WEDM
Technical Principle and Working Properties of Sludge Dredging by Airlift Water Jet
Arbitrary Curvature Radius of the Optical Parts Precision Polishing Technology
Experiment Research on Preparation Pigment Type Magnetic Iron Oxide Powder Utilizing Magnetic Separated Slag
Thermal Stress Analysis for Local Heating Variable Cross-Section Roll Forming
Finite Element Analysis and Fracture Forecast of U Channel Flexible Roll Forming
Analytical Investigation on the Aging Process of Vegetable Insulating Oil
The Controlled Powders Morphology of Bismuth Niobium Titanate Depending upon the Isothermal Annealing
Sapphire Substrate Ring-Belt Magnetorheological Polishing Processing
Research on Flotation Mechanism of Quartz Using Magnesium Ion as Activator
Effect of Forced Convection on Grain Refinement of S32205 Duplex Stainless Steel
Selection of Process Parameters for Laser Assisted Machining of Al2O3 Ceramics
Comparative Study of Different Types of Flashes on the Flange Open-Die Forging
Effect of Premelted Calcium-Magnesium-Aluminate Flux on Magnesia Carbon Brick
Effect of Microalloying on Structures and Properties of Aluminum Alloy
Controlled Synthesis of Calcium Carbonate Crystals with Superstructure on the Templates of Bamboo Leaves /Mg2+
Chapter 4: Other Engineering Solutions for Manufacturing
3-D CFD Modeling the Straight Blade Vertical Axis Wind Turbine
The Design of the Mechanical Heart Valve by Using the Parametric Method
Hardware System Design of the Control System for Three Dimensional Variable Cross-Section Roll Forming
Analysis on Factors to Cause the Price Change of Building Materials
Monitoring of Blast Furnace Hearth Erosion
A Design Method Using SOA Paradigm for Mobile Cloud Computing Services over Multimedia Convergence Networks
Research on Auto Matching of Measuring Points Data with CAD Model for Hull Blocks
Application of Analytic Hierarchy Process in the Steel Industry
Experimental Device of Drilling String Dynamics in Horizontal Well and its Application
Research on Experiment Modal Parameters Identification of Parallel Manipulator
A Reconfigurable MES Model Based on Hierarchy
Dynamic Simulation Analysis of the Vibratory Sinking Piling System Based on AMESim
Optimization of Multiresponse Performance Measure in Slider-Rocker Compliant Mechanism Using Fuzzy-Taguchi Method
A Method to Measure the Station of Artificial Mechanical Heart Valves
Research on the Fuzzy Control for Vehicle Semi-Active Suspension
The Influence of Material Optical Properties on Temperature Distribution in an Automotive Lamp
Underwater Wet Weld Seam Tracking Based on Passive Visual Sensor
Characterization of Metal-Semiconductor Schottky Diodes and Application on THz Detection
Analysis on the Incompleteness of Moral Hazard Model
Graph-Theoretic Models for the Module of Safe Planning for Control Systems of Mobile Robots
The Application Research of Six-Axis Force Sensor Used by Trans-Femoral Prosthesis
Structure Design of a Novel Triaxial Micro-Accelerometer
The Comparative Model Analysis of Electronic Button-Sewing Machine Shell Based on Simulation and Experiment
Cybernetics in Planning and Design
Research on the Relationship between the Transaction Cost and the Corporate Governance
System Dynamics Mechanism Analyses on Building Materials Enterprise Factoring Risk
Research on Co-Branding Strategy in New Materials Industry
Bio Inspired Algorithms for Injection Moulding Optimization
Functionally Graded Structures through Building Manufacturing
Nonlinear Natural Frequencies of Rotating Composite Thin-Walled Beam with Geometrical Nonlinear
Estimation and Analysis for the Fatigue Life of Rail Joint Bolt
Design of Cylinder Positioning System Based on Proportional Valve
Analysis and Judgment of the Local Loss Based on the Entropy Gradient
Mapping Matrix of Variable Cross-Section Roll Forming Based on Visual Detection
Research on Mars Surface Image Visual Feature Extraction Algorithm
Reconfigurable Control Software for Additive Manufacturing Machines
A Quantitative Analysis of Lake Tourism Resource Value Based on AHP-Fuzzy Comprehensive Evaluation Method
Reliability Enhancement Test of Detection and Control Unit
Numerical Study of Droplet Formation Time on Solid Surface
Dynamic Target Tracking Based on Particle Filter in Actual Environment
Sea Bottom EM Field of M2 Tidal to Probe Upper Mantle Conductivity
Research on Accounts Receivable Financing Model Based on E-Commerce Platform
Research on Electronic Equipment Fault Diagnosis Expert System Based on Embedded Linux
A Multi-Tip Turning Tool Structure for Thin and Long Pieces
Research on Dynamic Characteristics for Large Span Cable-Stayed Suspension Bridges with CFRP Cables
Research on the Parametric Design System for the Excavator Working Device
COM Component Based on Matlab Algorithm for Speckle Processing
Design and Analysis of a Novel Wavelength-Selelctive Waveguide Photodetector
An Ultrasonic Motor Precision Adjustable Speed Scheme Study and Analysis
Simulation of Airflow Motion in Jet Nozzle with Different Geometric Parameters
Modeling, Analysis and Simulation of Bluetooth Process Based on SystemView
The Motor Fault Diagnosis Based on Neural Network and the Theory of D-S Evidence
Study on MR Imaging of Endothelial Progenitor Cells Labeled with the Complex of Super Paramagnetic Iron Oxide and Transfection
Capillary Effects during Droplet Formation on the Solid Surface
Design for Laser Beam Cutting Machine Tools Integrated NC System
A Study on Fault Diagnosis of Gears Based on Local Mean Decomposition Method
Soil-High-Rise Building Group Dynamic Interaction Considering Site Effect
Self-Learning of Robots and the Model of Hamiltonian Path with Fixed Number of Color Repetitions for Systems of Scenarios Creation
Numerical Simulation for Effects of Running Surface Profile Structure in Piston Ring Group on Blow-By and LOC
Mass Customization in the Tourism Industry of China
Application of AHP in Material Selection in Slope Protection Project in Riverway
Electronic Equipment Fault Diagnosis Expert System Based on PDA/HPC
Study of Milling Thickness and Milling Force on Two Directions Ultrasonic Vibration Assisted Milling
Optimization of Electrode Structures of PZT Acoustic Energy Harvesters Fabricated on SOI Substrate
A Magnetic-Assistance System as a Super Finishing Following Turning Machining
Analysis of Coal Gangue Pollution Control Technology
「Nielsen BookData」 より
