Materials design, processing and applications : selected, peer reviewed papers from the 4th International Conference on Manufacturing Science and Engineering (ICMSE2013), 30-31 March, 2013, Dalian, China

著者

• International Conference on Manufacturing Science and Engineering
• Liu, Xianghua
• Zhang, Kaifeng
• Li, Mingzhe

書誌事項

Materials design, processing and applications : selected, peer reviewed papers from the 4th International Conference on Manufacturing Science and Engineering (ICMSE2013), 30-31 March, 2013, Dalian, China

edited by Xianghua Liu, Kaifeng Zhang and Mingzhe Li

（Advanced materials research, v. 690-693）

Trans Tech Publications, c2013

• : [set]
• Part 1
• Part 2
• Part 3
• Part 4

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

The present volumes provide up-to-date and state-of-the art knowledge of the manufacturing science and engineering, including: Non-ferrous Metal Materials and Its Alloys, Iron, Steel and Its Alloys, Composites, Micro/Nano Materials, Ceramic, Functional Materials, Surface Engineering/Coatings, Materials Forming and Manufacturing Processes, Materials Machining, Welding & Joining, CAD/CAE/CAM, Modeling, Analysis and Simulation of Manufacturing Processes, Products Design, Manufacture and Industry etc. The volumes will not only provide the readers a broad overview of the latest advances but also provide the researchers a valuable summary and reference in this field.

目次

Preface and Conference Organization Chapter 1: Non-Ferrous Metal Materials and its Alloys Effects of Annealing on Microstructure and Phase Transformation Temperature of NiTiNb Shape Memory Alloy after Equal Channel Angular Pressing Research on Dynamic Recrystallization Behavior of near- Titanium Alloy during near- Compression Structure and Physical Properties of Liquid Ni2Sb98 Eutectic Alloy The Microstructure Evolution and Twinning Characterization of AZ31 Mg Alloy Sheet in Low-Temperature Bending Process An Experimental Study of High-Velocity Impact on Aluminum Foam Composite Shield Structure Extraction of Tantalum from Ta2O5 Using SOM Process Reaction Mechanism on Preperation of Ta with SOM Process Sintering Characters Analysis of the Al2O3-86 Homogenized Bauxite Step Reactive Sintering of Ti2AlNb Based Alloy with Element Powders Study on Microstructures and Mechanical Properties of Die Casting Mg-xGd-3Y-0.5Zr Alloys Study on Sintering Properties of Al2O3-70 Natural Mullite by New Processes Study on the ZK60A and AZ31B Magnesium-Alloy in the Application on High-Speed Train Seats The Effect of Heat Treatment on Microstructure and Performance of Die Forging Copper Yield of Alloying Elements Fed by Cored Wire into A Copper Melt Effect of Cooling Mode on Properties of a Cast Zinc Alloy Effects of Cr Substitution of Mo on the Formation and Mechanical Properties of FeCoMoCrZr Amorphous Alloys Study of Thermal Stability of Magnesium Alloys Direct Electrolytic Reduction of Solid Cr2O3 to Cr Using SOM Process Electrochemical Behaviors of Die-Cast Mg-4Al-0.4Mn-Xpr (x=0, 1, 4) Alloys in NaCl Solution Chapter 2: Iron, Steel and its Alloys Alloy Design and Application for Avoiding Carbide Network of CrWMn Steel by Phase Equilibrium Thermodynamic Method Atmospheric Corrosion Behavior of Salvaged Marine Cast Iron Artifacts Characterization of Passive Film Formed on X80 Pipeline Steel in Sodium Bicarbonate Solution Development of Hot Rolled Ship Plate with High Strength and High Toughness Effect of Rare Earth on Microstructure and Mechanical Property of Ferrite Stainless Steel Effect of Slag Composition on Total Oxygen of High Speed Wheel Steel Failure Analysis on Fracture of 16Mn Steel Green Manufacturing Operation Mode for Iron & Steel Enterprise Improvement of Radiation-and Thermal Stress-Induced Springback Degradations in Invar Alloy Using Repeated Radiation Plus Hot-Then-Cold Treatments Intergranular Corrosion Behavior of 00Cr12 Ferritic Stainless Steels Containing Cerium Microstructure Evolution and Grain Boundary Characteristics of Oriented Silicon Steel during Primary Recrystallization in a Pulsed Magnetic Field Microstructure Refinement of Hypereutectic High Chromium Cast Iron with Electric Current Pulse Recrystallization Thermal Simulation Experiment for a Micro-Alloy Steel Research on a New Secondary Creep Model and Creep Damage Evolution for P92 Steel Research on Fatigue Behavior of Beam with Corrugated Steel Webs Research on Molten Steel Flow with Electromagnetic Stirring Research on Powder Metallurgy High Nitrogen Stainless Steels The Effect of Finish Rolling Temperature on Microstructure and Mechanical Properties of Vanadium Containing Ferritic Stainless Steel The Effect of Microstructure on Properties of High Deformation Pipeline Steel X70 The Investigation in the Influence of Hardness to Transition Point after Tempering for Boric Carbon Steels Thermodynamic Analysis and Observation of Inclusions in H13 Die Steel with Rare Earth 20#,60Si2Mn,9Cr18MoV Steel Ferrite Area Dynamic Recovery and Recrystallization Research Beneficiation Study on an Oolitic Hematite Corrosion Property of a New Repair-Free Steel Developed for Bottom Plate of Cargo Oil Tanks Effect of Loading Rate on Tensile Properties of Automotive Steel Sheet Effect of Secondary Cooling on Non-Oriented Electrical Steel Strips Produced by Twin-Roll Casting Process Effect of Tempering Process on Residual Stress in Hot Rolled Low Carbon Martensite High-Strength Steel Strip Hot Ductility Behavior of 800MPa Ultra High Strength Niobium Containing Steels Numerical Simulation on Collision and Aggregation Process of Al2O3 Inclusions with Different Morphology Characteristics Research on Using Limestone for Slagging during BOF Steelmaking Process Study on Desulfurization Kinetics Model of LF Refining Study on Initial Oxidation Film Formation Mechanism of T23 Steel at 600 DegreesC The Implementation of Steelmaking MES for Pangang Group The Investigation on Wire Rod Materials of Low Carbon Steels and Extra Low Carbon Steels Influence of Heat Treatment on Microstructure and Properties of Ultrahigh Strength Fe-Ni-Co Alloy Corrosion-Resistant Alloys for Tubings and Casings and Alloy Material Selection in Oil and Gas Wells Effect of Water Vapor on Oxidation of Ferritic Stainless Steel 21Cr-0.6Mo-Nb-Ti in Simulated Reheating Environment Study of the Effect of W and Mo Binary Alloying on Fe-Ni36 Invar Alloy Properties Effect of Pre-Oxidation on the High Temperature Oxidation Behavior of Fe-Cr-Al Powder Porous Metal Experimental Research on Size Effect of Magnetic Hysteresis Loop for Q235 Steel Chapter 3: Composites Analysis and Research on the Microstructure Fractal Characteristics of the Copper Matrix Composites Dynamic Analysis of the Rotating Composite Thin-Walled Cantilever Beams with Shear Deformation Finite Element Model and Bending for Marine Composite Flexible Pipes High-Temperature Dry Sliding Friction and Wear Characteristics of As-Cast SiCP/A356 Composite Influence of Fiber's Surface State on Mechanical Properties and Fiber-Matrix Interaction of CFRP Microstructure and Properties of Deformation-Processed Cu-Cr In Situ Composites Preparation of the High Temperature Resisting Material with Al-CrO3 System by SHS Study on High-Speed Milling Force of SiCp/Al Matrix Composite Synthesis and Characterization of MgFe2O4 /MgO Composite Films from Layered Double Hydroxides Precursors Synthesis Method and its Influence Factors of Hydrotalcite-Like Compounds The Influence of AC Perturbations on EIS Measurement of Copper/LDPE Composite with High Resistance The Sorting Method of the same Pattern Compound Material Based on Basic Element Model of Surface Microstructure Vulcanization Kinetics of Starch Xanthate /Natural Rubber Composite Application of Diffraction and X-Ray Microanalysis in Study of MMC Structure Influence of Temperature on Carbonation Pellet for Ferrous Dust Innovative Utilization of a Borate Additive in Magnesium Production to Decrease Environmental Impact of Fluorides from Pidgeon Process Microstructure and Formation Mechanism of Two-Liquid Bimetal Composite Interface Morphology and Property of Polypropylene Composites Filled with Modified Attapulgite Parameters Optimization of Steel Wire Reinforced Thermoplastics Composite Pipe Preparation and Characterization of Hydroxyapatite Whiskers Preparation SiC Ceramic Composite Filtration Membrane Materials by Dry Pressing and Synchronous Sintering Method Silty Clay and Fibre Interaction Study on Film-Forming Technique of Aluminum Composite Membrane Prepared by Inorganic Precursor Sol-Gel Method The Research Progress of Nitinol Vascular Stent Fabrication and Characterization of NiOx/Bi2WO6 with Enhanced Photocatalytic Activity under Visible Light Illumination Study of Microstructure and Properties of Corundum-Calcium Hexaluminate Composite Aggregate Adsorption of Congo Red from Aqueous Solution onto Chitosan/Rectorite Composite Chapter 4: Micro / NanoMaterials and NanoTechnologies A Molecule Computing Model for Maximum Independent Set Problem Based on DNA/AuNP Conjugation Preparation and Photocatalytic Activity of Gadolinium-Doped ZnO Nanocrystalline Powders Preparation of Nanosized Barium Titanate Powder by a Direct Reactive Precipitation Method The Development of Nanocrystalline Materials Prepared by Electrodeposition The Effect of PEG on the Preparation of Hydroxyapatite The Effects of Surfactants on the Topography of HA The Research of Influence on Fe-N Alloy Magnetism from Experiment Parameters A Novel Hybrid System for the Fabrication of Electrospun Mat with Microspheres Enhanced Field Emission from Carbon Nanotubes Coated by Nanoparticles of Turbostratic Stacked Graphenes Preparation of Aluminum Nanoparticles and Oxidation Mechanism of Nano- and Micro-Particles The Preparation and Properties of Porous Scaffold Made of Nano-Hydroxyapatite/Polyamide66 Studies on Crystallizations and Mechanical Properties of Polypropylene/Nano-TiO2 Composites Thin Film Microcircuit Preparation in a Diamond Anvil Cell Micro-Structure of a Special Sericite-Jade: A Preliminary Study Using XRD and SEM Analysis Preparation of Expanded Graphite with Fe3O4 Nanoparticles Study on Catalytic Efficiency of Ag/N Co-Doped TiO2 Nanotube Arrays under Visible Light Irradiation A Novel 5-Fluorouracil-Loaded Polyelectrolyte Nanoparticle Formulation Aligned Nanofiber Arrays and Twisted Nanofiber Ropes via Electrospinning with Two Frames Collector Chapter 5: Ceramic Effect of Type and Amount of Wetting Agent on the Formability and Bending Strength of Vitrified Bond Diamond Abrasives Synthesis of Al2O3 Ceramics Matrix Composites by Thermal Explosion under Pressure and Hot Pressing Fabrication of ZrB2-Based Ceramics Doped with ZrSi2 Study of Domains and Size Effect of Curie Temperature in BaTiO3 Nanoceramics Study on Grindability Evaluation of Ceramic Materials Based on Interval Gray Principal Component Analysis The Progress of Amorphous Si-B-C-N Composite Ceramics Chapter 6: Optical/Electronic/Magnetic Materials Emission Color Variation of Sr3SiO5:Ce3+, Li+ Phosphor for Near-UV Light-Emitting Diodes by Co-Doping with Mg2+ and Ba2+ First-Principles Investigations of Structural Stability of LuN Inaln/GaN HEMT Small-Signal Parameter Extraction Influence of Deposition Temperature of ZnTe Films on Silicon by Thermal Evaporation Preparation and Characterization of a Novel Gadolinium Triple-Decker Sandwich-Type Complex with Tetrabenzoporphyrin Ligand An Integrated Evaluation Model for New Product Development in Light-Emitting Diode Plant Lighting Industry Casted Strip Character of Twin-Roll Casted High Strength Non-Oriented Electrical Steel DFT Studies on the Electronic Spectrum and the Second-Order Nonlinear Optical Properties of Donor-Acceptor Helicenes Ferromagnetic Material of the Nearly Half-Metallic Alloy Co2TiGa Luminescence Properties of ZnO:Eu3+ Red Emitting Phosphor Prepared by Precipitation Method Magnetic Material Based on Full-Heusler Alloy Co2CrGa Structural Stability, Electronic and Optical Properties of Ni-Doped Boron Carbide by First Principles Calculation Study the I-V and C-V Characterization of n-ZnO/p-Si Heterojunction Study of Optical Characteristics of H2S Molecule Adsorption on Agn (n=3,5) Clusters Preparation of Stilbene-Eighteen Alkyl Quaternary Ammonium Salts as Fluorescent Brightening Materials and Surfactants Synthesis and Properties of Novel Hole-Transporting Materials Containing Triphenylamine and Bipyridine Units Electronic Properties of Zno Doped by Rare-Earth Elements from First-Principles The Influence of B2O3 on the Luminescence Behavior of ZnGa2O4 Phosphor at Different Sinter Temperatures Chapter 7: Functional Materials Carbon Cloth Diffusion Layer for Fuel Cell Electrode The Influences of Zirconia on the Properties of Magnesia Alumina Spinel Bricks Ti2AlC/TiC Functionally Graded Material Fabricated by Reaction Sintering The Microstructure and Thermochromic Properties of La1-XSrXMnO3 Smart Materials Investigation on the Creep property of Theoretical Composition Magnesia Alumina Spinel Bricks Influence of Fe2O3 on the Hydration Resistance of MgO-Al-C Bricks Effects of Sodium Salt on Hot Mechanical Properties and Microstructure of MgO-Al-C Bricks Use of Waste Tire Rubber Particles as a Part of an Aggregate Added to Thermal Insulting Mortar Chapter 8: Building Materials, Construction, Soil Behavior, Architecture and Urban and Land Planning Applications Building Energy-Saving Technology and its Application Based on Low Carbon Concept Built-In Spiral Ripe Thin-Walled Square Steel Tube Concrete Column of Nonlinear Finite Element Analysis Effects of Clay on Flow Properties of Polycarboxylate Superplasticizer and its Control Measure Effects of Ferrocement in Strengthening the Serviceability Properties of Reinforced Concrete Structures Elementary Discussion on the Treatment of Old Road Problems in Upgrading and Reconstructing for the Road Finite Element Analysis for Concrete Filled Double-Skin Steel Tubular Stub Columns Preparative Techniques and its Performance of Chemically Foamed Cement Paste Research on Building Low-Carbon Hotels from the Perspective of Circular Economy Research on Mass Concrete Construction Techonogy of Raft Foundation of Hongyun Building Short- and Long-Term Deflection of Concrete Structures Stability Bearing Capacity of Concrete Filled Thin-Walled Circular Steel Tubular Column under Axial Compression Study on Clinker Production Using Magnesium Slag on a 4500tpd Line Study on Crack Spacing and Width of Expansive Soil due to Evaporation Study on Medium Density Radial Bamboo Curtain Composite Plybamboo Study on Particle Characteristics of Cement by Vertical Roller Mill Finish Grinding Study on the Axial Ultimate Bearing Capacity of Concrete-Filled Square Steel Tubular Stub Columns Test of Dynamic Strength Characteristics of Paleosol Test Research on Stiffness of Loaded Concrete Beams Strengthened with Prestressed CFRP Sheets The Affecting Factors of Slope Stability Based on Orthogonal Design The Effects of Steel Content for the Mechanics Performance of Fiber Modified Polymer Resin Concrete The Guidance Pattern of Countryside Sustainable Development of Three Gorges Reservoir in Chongqing The Influence on the Concrete Durability in Bleed Air Performance Caused by Concrete Admixture The Inhibition Studying of Many-Doped Mineral Admixture for Concrete Alkali Silicate Reaction The Inhibition Studying of Single-Doped Mineral Admixture for Concrete Alkali Silicate Reaction The Inspiration from the Slow-Traffic and Lingering Characteristics of the Inhabited Bridge The Studying of Reinforcement Mechanism of Fully Grouting Rock Bolt in Brittle Wall Rock Mass Towards a Competitive City: Shanghai's Urban Development Unified Solution of the Ultimate Bearing Capacity for Stiffened and Thin-Walled Square CFST Short Columns under Axial Compression A Review of Detection, Evaluation and Repair Technology for Hydraulic Concrete Structures Active Countermeasure Mechanism to Waste Dump Based on Spatial Effect Analysis on Characteristics of Ancient Kiln Village in Mengjiajing Analysis On Morphology Of Settlement and Residence In Wangyu Village Analysis on Seismic Behavior of Structures Supported by Foundations with Different Locations Concrete Slab Value Stream Mapping of Brazilian Residential Buildings - a Lean Construction Study Case Effect of Pore Structure on the Chloride Permeability of Concrete with Mineral Admixture Energy Conservation Technology in BedZED and the Enlightenment for China Evolution and Significance of the Residential Area of Landscape Design From the National Historical and Cultural City of Shanxi DaiXian see Ancient Frontier Town History Culture and the Characteristics of the Development of City From the View of Qujia Courtyard House of Shan Xi Dwellings Traditional Cultural Value Method and Trend of Residential Landscape Design Paying Attention to the Application of Ecological Strategy to Construction Design Production of Concrete Blocks with Residues for Civil Construction Protection and Sustainable Development of Jiexiu Ancient City Chapter 8: Building Materials, Construction, Soil Behavior, Architecture and Urban and Land Planning Applications Research and Application of Corundum Based Self-Flowing Castable Refractories Research on Axial Behavior of Thin-Walled T-Shaped Steel Stub Columns Filled with Recycled Demolished Concrete Lump Research on Spacial Displacement Regulations in Soft Surrounding Rock Tunnel Soil Erosion Assessment in the Watershed of Dehua District of Fujian Province Studies on RC Beams Strength with Steel Wires Using Nolinear Finite Element Method Study on Influencing Factors of CFST Arch Bridge Stability Study on Recognized Mode of the Revolutionary Site Protected Object in Traditional Village The Cause of Cracks in the Cement Concrete Pavement of County-Highway and Precautionary Measures The Finite Element Analysis of Thin-Wall Ribbed Square Steel Tube Recycled Concrete Bias Column Mechanical Properties Thermal Conductivity of Fired Clay Bricks Incorporated with Cigarette Butts Study on the Natural Vibration Characteristics of Jointed Slope The Evaluation System of Urban Low-Carbon Level Analysis of the Effect of Natural Slope Stability due to Tunnel Excavation in Mountainous Areas Chapter 9: Energy Materials Effect of Argon Gas Flow on the Thermal Field in a Directional Solidification System for Multi-Crystalline Silicon Effect of Sodium-Based Slag Treatment on the Distribution of Impurities in Metallurgical Grade Silicon Maximized On-Demand Hydrogen Generator Design Purification of Silicon by Solvent Refining with Si-Sn Alloy Studies on the Electrochemical Behavior of Sio/C Anode Materials by AC Impedance Method Summarize the Studies on Improving the Electrochemical Performance of Spinel LiMn2O4 Temperature Distribution of Multi-Crystalline Silicon Ingots in the Directional Solidification Process Cathode Material Li [Li0.2 Mn0.44Ni0.18Co0.18]O2 Synthesized by Molten Salt Method Fabrication of Micro DMFC Stack Using MEMS Technology Mathematical Modeling of a DMFC Cathode with a Double Catalyst Layered Structure Membrane Electrode Assemblies Chapter 10: Environmental Friendly Materials, Treatment and Removal Technologies A Technological Method to Improve the Filtration Efficiency of Fiber Materials Effects of Laccase on the Properties of Hemp Fabric Experimental Study on Cr6+ Adsorption in Water about the Daily Waste Peanut Shell Preparation and Mechanical Properties of the Environmentally Friendly Wood-Plastic Composites Preparation of Calcium Sulfate Anhydrate Whisker and a Primary Investigation of its Arsenic Removal Performance Removal of Natural Organic Matter of Artificial Lake by Modified Fly Ash Study on the Environmental Friendliness of Biomass Dishware Based on Life Cycle Assessment Surface Morphology and the Adsorptive Behavior of Coconut Active Carbon Adsorption Characteristic of Steel Slag Haydite for Phosphorus Removal from Wastewater Adsorption of Cr(VI) from Aqueous Solution by two Kinds of Pillared Bentonites Column Experiment on Cr (VI) Reduction with SiO2-Coated Fe Nanocomposites Early Strength Characteristics of Palm Oil Fuel Ash and Metakaolin Blended Geopolymer Mortar Influence of Organic Alkali on the Preparation of Lignin-Based Anionic Adsorbents and their Performance in the Removal of Nitrate Strength and Durability Characteristics of Polymer Modified Concrete Incorporating Vinyl Acetate Effluent Study on Production Technology of Paper Wooden Compound Pallets Synthesis of Epoxidized Soybean Oil via Phase Transfer Catalysis Tertiary Treatment of Paper Industries Effluent with Advanced Electrochemical Oxidation Process in the Presence of Modified Bentonite Powdery Electrodes Analysis on Distribution Law of Damaged Filters for Bag Dedusters in Coal-Fired Power Plants Factors Influencing the Removal of As(V) from Groundwater by NF/RO Effect of Preparation Method on Photocatalytic Activity of Titanium-Bearing Blast Furnace Slag The Influence Factors of Compressive Strength and Production of Mineral Polymer of Aluminum Rocks in Xiuwen County, Guizhou Province, China Characterization of some Key Industrial Waste Products for Sustainable Concrete Production A Study on Wellsite Wastewater Reinjection Stratigraphic Control in Changqing Oilfield Effects of Latency Removal on the Fiber Properties of Poplar APMP Green and Efficient Coal Slurry Drying Process Study on Factors and Operation of Granulation Method for Strontium Removal The Influence of Ph Value on the Treatment of Direct Sun-Proof Dyes Wastewater by Iron Trichloride Preliminary Study of Utilizing Ozone in Treatment of Operationally Exhausted Metalworking Fluids Purification Effect of Self-Aeration Constructed Wetlands on COD Research on Removing Radioactivity Minerals Form Titanium Rough Concentration of Haibing Selection of Substrate Diameter and Filling Thickness for Artificial Wetland Study on Cyclone Dust Removal Equipment after Dense Phase Semi-Dry Flue Gas Desulfurization System Effect of Wet Storage on High Yield Pulping with H2O2-CoSO4 Chapter 11: Earthquake Resistant Structure, Materials and Design Dynamic Response of the Compound Structure of Foam Aluminum Core Composite Sandwich Material to the Shock Wave of Gas Explosion Seismic Hazard Estimation in East China Offshore Areas Aeolic and Seismic Structural Vibrations Mitigation on Long-Span Cable-Supported Bridges On the Generation of Seaquake Velocity Fields for Submerged Floating Tunnel Structures Chapter 12: Biomaterials and Biotechnology Activation Energy of Pure and Impregnated Lignocellulosic Materials Obtained by Isothermal Method Adsorption of Acid Red by Porous Chitosan Film Asymmetric Synthesis of Ethyl (R)-4-Chloro-3-Hydroxybutanoate with a Two Recombinant Escherichia coli System Comparison of the Roles of Tea Polysaccharides and Polyphenols in Growth Inhibition of Hepatoma H22 Cells in Mice Effects of the Protein in Wheat Straw on Enzymatic Hydrolysis Enzymolysis Optimization of Walnut Residue Protein Using Trypsase Immunomodulatory Activity in Vivo of Porcine Cartilage Polysaccharide Nanoparticles on Murine H22 Hepatocarcinoma Cells Influence of Cortical Layer Thickness of Alveolar Bone on Stress Distribution over Implant Supported Region Kinetics Study of Vitamin A Precursor Synthesis by Immobilized Lipase-Catalyzed Regioselective Monoacetylation in n-Hexane Mechanism of Peptide Changes during Drying Fermented Soybean Meal Numerical Simulation of Cell Growth Pattern and Determination of Fractal Dimension of Cell Cluster Optimization of Multi-Strain Solid State Fermentation to Improve the Content of Soybean Meal Protein by Response Surface Analysis Optimization of Solid State Fermentation to Improve the Degree of Hydrolysis Soybean Meal Protein Preparation and Characteristics of Chitin-Gelatin Composite Film Prokaryotic Expression and Purification of Tomato Cnr Protein Protein Extraction of the Long-Term Room Temperature Storage Wheat Straw Research on Oxidation of Phenanthrene to Phenanthrenequinone with TBHP Selectivity of the Cycloaddition of Tert-amyl Alcohol and -methylstyrene Studies on Charcoal Block Production from Three Charcoal Types of Biomass Employing Screw Press Unit Study of Physicochemical Properties of Chinese Small Cabbage(Brassica chinensis L.) Stored at Four Temperatures Study on Hydrophobic Microorganism as Coal Bio-Desulfurizing Agent Study on the Isolation of Polysaccharide from Purple Sweet Potato by DEAE-Cellulose 52 Synthesis and the Study of Oil Displacement Performance of Stearate-2-Hydroxy-3-Propane Sulfonic Acid Sodium Salt The Assessment of Sweet Sorghum Straw Bio-Feed Fermentated by the Compound Microbial Agent in Bags and Cellar Pits The Classification and Characteristic of Proteins in Wheat The Effects of Rhodiola Tibetica on Lung Tissue of Rats with High Altitude Pulmonary Edema The Wool Shrink-Proof Technology of Sericin Bonding Wool Construction of Expression Vector with Fruit-Specific Promoter and Genetic Transformation of Strawberry Determination and Identification of Chondroitin Sulfate from Tilapia Byproducts Effect of Xylanase Treatment on Papermaking Properties of Poplar High Yield Pulp Emulsifying and Foaming Properties of Wheat Gluten Influenced by High Pressure Microfluidization Flame Retardation of Wood High-Purity Isolation of Trans-Resveratrol from Rhizma Polygoni Cuspidati by High-Speed Counter-Current Chromatography Investigation of Airflow Influence on Self-Heating Process of Linseed Oil Using Safety Calorimeter SEDEX Isolation of Saccharomyces Cerevisiae GJ03 from the Spontanous Fermentation Orange Wine and Application in the Course of Orange Wine Brewing Mechanisms and Defiberation Point of Dendrocalamus Giganteus Munro Kraft Pulping Optimization of The-Hydrolysis Parameters of Dissolving Pulp of Fast-Growing Poplar Producing Preparing Gambiered Guangdong Silk with Ultraviolet Radiation and Normal Mud/Fe2+ Purification and Preliminary Characterization of a Thermostable Lactase from Bacillus coagulans T242 Research on the Antioxidation of Torreya Grandis Alcohol Extracts in Cholesterol-Fed Rats Simulating Glycolytic Metabolism of Escherichia coli by Using Optimal Control Models Studies on the Preliminary Characterization of a Novel Exopolysaccharide Produced by Streptococcus thermophilus Strain from Tibetan Kefir Grain Study on Deproteinization of Polysaccharide from Corn Silk with Cetyl Trimethyl Ammonium Bromide Study on Furfural Production from Hemicelluloses Study on Plant Growth Regulation Activity of the Low Polar Fractions from Mikania micrantha H.B.K. on Phaseolus radiaus Study on the Emulsifying Properties of Tilapia Skin Gelatin Study on Extraction of Wasabi Plant Material Bio-Activity Substances and Anti-Cancer Activities Study on Extraction Technology of Polysaccharide from Pleurotus ostreatus The Ameliorative Effect of CPCC and Role of CRT in Hepatic Injury by Alloxan-Treatment The Influence on the Milk Yield and Milk Composition of the Cows after Feeding with the Sweet Sorghum Straw Fermented by the Compound Microbial Agent in Bags The Spectrum Properties of Type Collagen Self-Assembly Film Theoretical Investigation on Tautomerization Mechanism of 6-Thioguanine Ugonin K Induces Cell Cycle Arrest and Apoptosis through Reactive Oxygen Species/Apoptosis Signal Pathway in Human Skin Cancer Cells Clean Method for Stickies Control with StickAway Enzyme in ONP Pulps Influence of Surface Zeta Potential on Adhesion of Chlorella sp. to Substratum Surfaces Study on Amphiphilic Macromolecules Adsorbent of Cellulose Mixes Ether Based on Cotton Stalk Production and Utilisation of Non-Conventional Coke High-Consistency Electrochemical Delignification of Poplar Kraft Pulp Gold Immunochromatography Assay - A Newly Rapid Detection Technique for Aquatic Products Using of Magnesium Hydroxide and Sodium Hydroxide in DP Beaching of NaOH-AQ Wheat Straw Pulp Preparation and Characterization of Regenerated Wool Protein PAN Blended Fibers Biocompatibility Research of the Biphasic Calcium Phosphate Composite Ceramic Film Obtained through Micro-Arc Oxidation on the Medical Titanium Surfaces Determination of Ignition Temperature of Organic Dust Layers Chapter 13: Chemical Materials and Chemical Technology Preparation and Characterization of Alkylethoxyethanesulfonate in Superbasic System KOH-DMSO Preparation and Properties of Modified Lignin Used as Additive of Brown Coal CWS Preparation of Aromatic Silanes as High Thermal Stability Coupling Agents Removal Efficiency and Distribution Characteristics of PAHs in Coking Plant Contaminated Soils by In Situ Chemical Oxidation Remediation Cascaded Columns of Total Reflux Batch Distillation with Periodic Liquid Exchange Effects of Microwave Power on Performance of Pt/CeO2MWCNTs Catalysts Prepared by Microwave-Assisted Polyol Process for Methanol Electrooxidation Experimental Study of Optimal Coagulation Effect on Three Kinds of Direct Sun-Proof Dyes by FeCl3 The Evaluation of Factors Affecting the Performance of Heavy Oil Emulsion Kinetic of C.I. Reactive Black 5 by Fenton-Like Oxidation Research on Tubing and Casing Corrosion in Sour Gas Reservoirs and Corrosion-Resistant Material Selection Material Selection of Water-Ring Vacuum Pump in Yellow Phosphorus Tail Gas Industry Preparation of Strontium-Barium Hydroxyapatite by Coprecipitation Modified Cuo/ZnO/Al2O3 Catalysts for Methanol Synthesis from Co and CO2 Co-Hydrogenation Study on the Reaction Kinetics and Catalytic Stability of Pillared Bentonite in Heterogeneous UV-Fenton Process Distribution and Bioavailability of Nitrogen Species in Street Dust from Small Towns in Yongchuan, Chongqing The Characteristics of Trace Metal Elements Accumulation and Distribution in Elsholtzia Harchowensis Dyeing of Cotton Fabric Modified by 2, 3-Epoxpropyl Triethyl Ammonium Chloride with Reactive Dyes Chapter 14: Polymeric Materials Adhesion Loss in Antistripping Agent Treated Asphalt Binders due to Moisture Experimental Research on the Solubility of Cellulose in Different Ionic Liquids Influence Analysis of the Parameters on Sound Absorbing Performance for Polymer Wool Preparation and Properties of Silane-Terminated Poly(urethane-Imide) Preparation of High Heat-Resistant Profile Based on PVC/ -MSAN/ABS Ternary Blends Study on Properties of Enzymatic Hydrolysis Lignin (EHL) and Chloride Polyethylene (CPE) Composites Study on Relationship between BPA Migration and Thermal-Oxidative Aging Degree of Polycarbonate Synthesis of a New Water-Soluble Conjugated Polymers Containing Thiazoline Moiety for Antibacterial Activity Bioassay Synthesis of Quaternary Ammonium Cationic Polymer PEA Synthesis of UV-Writing Fluorinated Polymer for Organic Optical Waveguide The Studies on Crystallization of Polypropylene (PP)/Nano-TiO2 Composites under Microwave Irradiation The Swelling Kinetics Study of Hydrogels Prepared by the Different Finesses Degrees of Eupatorium Adenophorum Emulsifier-Free Core-Shell Hybrid Latexes from Castor Oil-Based Waterborne Polyurethane and Polyacrylate Containing Fluorine and Silicon Research on the Relationship between the Productivity of Antarctic Krill Chitin and its Fineness of Grind Synthesis and Properties of a Castor Oil-Based UV-Oligomer Comprising of Side-Chain Benzophenone The Best Dosage of Polymer Dispersant in WDG by Zata Potential Method The Surface Modification and Characteristics of Useful Expanded PTFE Composites by Photo-Radiation Methods Study on Pretreatment Agent for Anti-Clogging in Polymer Flooding Wells Synthesis of Poly(acrylic Acid Dodecyl Ester-Styrene-Maleic Anhydride) Terpolymer and Surface Modification of Glass Fiber Study on the Preparation of 2-Phenyl Imidazole Microcapsule and its Effect on Curing Epoxy Resin Chapter 15: Thin Films and Technology Aluminum-Induced Crystalization of Amorphous Silicon Films Deposited by Megnetron Sputtering Electrodeposition and Properties of CuInS2 Thin Films On the Mechanism of Copper Oxide Reduction by Dielectric Barrier Discharge Plasma Using H2 and Ar Mixture Gases Preparation and Properties of Cu2ZnSnS4 Nanoparticles by Solvothermal Method Properties of Ohmic Contact of Au Electrode on Polycrystalline Mercuric Iodide Characterization of TiO2 Composite Film on Steel Obtained in Aluminate Electrolyte by PEO and the Photocatalytic Activities Effects of Preparing Conditions on NO2-Sensing Properties of Sputtered WO3 Nano-Films Electrochromic Property of Sputtered Amorphous NiO Films Hydrogen Induced Modifications of Optical and Electric Properties in Mg Thin Films Structure Characterization of W-Doped Vanadium Oxide Thin Films Prepared by Reactive Magnetron Sputtering Study on Wurtzite-ScxAI1-XN Thin Film: A Review The Structure and Magnetic Properties of NiZn-Ferrite Films Deposited by Magnetron Sputtering at Room Temperature ZnSe Quantum Dot Films Deposition from Modified Chemical Solution with Sodium Citrate Chapter 16: Mechanical Behavior, Fracture and Fatigue Bending Ratcheting Behavior of Zircaloy-4 Alloy at Room Temperature Experimental Study on Fatigue Behavior of 35CrMo Steel after Torsional Prestrain First-Principles Study of the Elastic Properties of Hexagonal Phase ScAx (A=H, He) Improved Extend Finite Element Method for SIF Calculation Mechanical Behavior Research of a Novel Bridge Tower Structure Based on Model Test Numerical Simulation of the Effect of Temperature on the Failure Strength of Rock Reliability Study on Crack Growth Rate of ADB610 Steel Chapter 16: Mechanical Behavior, Fracture and Fatigue Statistical Analysis of Fatigue Crack Growth Rate of Q345E Steel Super Long Life Fatigue Properties of Rail Steel U71Mn and U75V Analysis on Creep Behaviors at High Temperature and Fracture Morphology of P92 Steels Comparison of the Simulation and Experimental Fatigue Endurance Behaviors in T6-Treated Nanosized SiC Reinforced Al Alloy Composite Experimental Study on Out-Plane Crack Extension in Rimmed Steel Fracture Analysis on Drainage Pipe Socket of Boiler High Cycle Fatigue Behavior of Eco7075-T73 Aluminum Alloy Prediction of Fatigue Crack Growth of 2024-T351 by Grey GM(1,1) Model with Rolling Check Research on the Effect of Pre-Stress on Bending Stiffness of the Ball Screw Based on ANSYS Study on Kinetic Competitions of Crystal Growth Tensile Characteristics of Polygonaceae Weed Roots in Slope Collapse Watershed The Fracture Failure Analysis of Shaft for Light Hydrocarbon Pump Applications of a New Element Model of Solid Bodies in Plasticity Analysis of Fatigue Life and Influence Factors of Tubing with Initial Crack Check on Structural Strength of Carbon Fiber Composite Field Kitchen Units Chapter 17: Tooling Testing and Evaluation of Materials, Measurement Investigation and Analysis on Transverse Crack Spacing Distribution in Continuously Reinforced Concrete Pavement in China Numerical Solution of Constant-Q Fractional Order Integral Modeling Research of Baseball's Best Batting Position Changes with the Selection of Material of Baseball Development of Hard Rock Cutting Tool with Advanced Diamond Composites Research on Properties of Materials Based on Extension Evaluation Method Influence of Rear Earth Yb on the Specific Heat of Liquid Fe-Co-Yb Alloy Lateral Non-Uniformity Charges Influence on Interface Trap Density (Dit) by Terman Method in the nMOS Fabrication Ablation/Erosion Test Technology on C/C Composite Material Based on Plasma Evaluation of CO2 Absorbent/De-Absorbent by AAO/CaO Membrane Application and Evaluation of New Cold Insulation Material in Cold Insulation Structure of Oil and Gas Processing Device On-Road Gaseous Emission Characteristics of China IV CNG Bus in Shanghai A New Experimental Technique for Dynamic Material Properties On the Experimental Investigation of Rock Abrasiveness in Petroleum Engineering Chapter 18: Structural Strength and Robustness Analysis on Sealing and Deformation of Exhaust Valve Housing of Marine Diesel Engine Analyzing Bearing Capacity Influence due to Location of Bearing Push-Extend Reamed of the Push-Extend Multi-under-Reamed Pile Characteristics of Thin Metal Plate Being Strengthened by Laser Irradiation Design of Variable Airship Mechanism Based on Finite Element Method Finite Element Analysis of the Strength of Ladder Type Structure of the Deep-Water AUV The Coupled Thermal and Mechanical Load Analysis in the 6S50MC-C Type Marine Diesel' Piston The Finite Element Analysis of Ultimate Bearing Capacity of Initial Bending on the T-Axis Compression Component Theoretical and Numerical Solution of Deflection of the Circular Ring under a Concentrated Force Effect of Track Measuring Beam on the Bogie Frame Strength and Vibration Mode of Inspection Car Enhancement Design on Composite Blade Structure of Small Wind Turbines Using Finite Element Analysis FEM Based Statics Analysis of the Main Steel Structure of Bucket Wheel Stacker-Reclaimer Finite Element Analysis for the Collapse Accident of One 110kV Transmission Tower Mechanical Strength Analysis and Structure Improvement of Diaphragm Chamber Based on Finite Element Method Numerical Simulation on Structural Strength of Cam Mechanism for Automobile Panel Die Research on Screw Pump Rotor Eccentricitys Influence on Sucker Rod Partial Abrasion through Contact Analysis The Application of AAR Load Spectrums in the Fatige Assessment for G70 Tank Carbody The Mechanical Property Comparison of Two Kinds of Counterweight Booms of Stacker Reclaimer Acoustic Emission Signals Characteristics of Q345R at Tensile Progress in the Normal and Low Temperatures Chapter 19: Theory and Application of Friction and Wear Experimental Study of Dynamic Characteristics of Dry Friction Damping of Turbine Blade Steel Fever Analysis and Engineering Applications of the Heavy Machine Tool's Main Bearing Key Aspects in Addressing Friction in Coaxial Hydraulic Sealing Systems Progress on Facilities and Methodology to Evaluate Abradable Seal Coatings Study on Tribological Performances for Textured Bearing of ICE The Analysis of the Influencing Factors about Friction and Wear Characteristics of the Piston Ring in Stirling Engine The Effect of Friction Coefficient on Fretting Fatigue Cracks Study Film Temperature Including Cavitation Effect of Sliding Bearing by CFD Method Research on the Reinforcement Mechanism of Stretched Rock Bolt and Analyzing of the Impact Parameters Application of CBN Cutting Tools in Hard Turning and Tool Wear Experimental Investigation on Ultrasonic Vibration Assisted Turning of Stainless Steels with PCD Tool Study of the Effect of Tool Wear on Cutting Ti6Al4V Process Chapter 20: Surface Engineering/Coatings Arc-Spraying Composite Coatings on Mild Steel for Long-Term High-Temperature Oxidation Protection Cracking Behavior of Two Kinds of Plasma Cladding Layers by Precursor Carbonization-Composition Process Effect of Pt Content on TGO Growth in EB-PVD TBC Systems with Niptal Bondcoats Evaluation Hard Layers in Steel AISI 8620 Formation of Hard Layers in Tool Steels In-Flight Particle Behavior Measured by DPV-2000 System under Low Pressure Condition Process Characteristics and Experiment on Micro Arc Oxidation of Light Metals Study on Water-Based Paint Stripper for Tinplate Surface Activity Research of Cationic Gemini Surfactants Synthesis and Properties of Hydroxyapatite-Containing Porous Titania Coating on Titanium by Ultrasonic Shot Peening and Micro-Arc Oxidation The Irradiation Effects of Metal Gold Surface by Intense Pulsed Ion Beam The Study of Aromatization Performance of HZSM-5 Catalyst Deposited Silicon on the Surface Analysis of Selective Absorber Coatings on Thermal Performance of the Solar Flat-Plate Collector Characteristics Evaluation of Coating Film by Thermal Spray in Seawater Solution Comparison Research on Mechanical Properties of Stainless Steel after Laser Peened and Ultrasonically Peened Effect of Electro-Spark Deposition Process Parameter on WC Coating Thickness of H13 Steel Surface Effects of Carrier Gases on the Microstructures and Properties of Ti Coating Layers Manufactured through the Cold Spraying Influences of Surface Nanocrystallization Induced by High-Energy Spot Peening on Microstructure and Properties of Magnesium Alloy Investigations of Wetting Properties of Stainless Steel by Molten Multi-Component Oxides Polymer Mixtures as Colon Targeted Drug Delivery Systems Structrure of Al2O3 Ceramic Coating on Super Alloy Prepared by Cathodic Plasma Electrolytic Oxidation Study on the Surface Plasma Hardening Treatment and Anti-Penetration Mechanism of Armor Steel The Study on Preparation and Apply of Ni-Co-P Alloy Coating Electroless Nickel-Phosphorus Plating on TiB2 Powder Phase Evolution and Mechanical Properties of Cr-C Coatings Deposited by Reactive Unbalanced Magnetron Sputtering Process First-Principles Study on Elastic Properties and Electronic Structure of Ti1-xAlxN Preparation and Cutting Performance of YT15 Cemented Carbide Tools with Ti (C, N)/Al2O3 Composite Coating Effect of Abrasives on the Lapping Performance of 6H-SiC Single Crystal Wafer Fabrication and Characterization of Magnetic Polymer ICF Target by the Electroless Plating Chapter 21: Materials Forming and Manufacturing Processes A Study of the Microstructure and Mechanical Properties of C-Si-Mn Hot Rolled Dual Phase Steel Analysis and Research on the Failure Mode of Large Automobile Stamping and Countermeasure Analysis on Structure of Radial-Axial Ring Rolling Experimental Equipment by FEM Continuous Cooling Transformation Behavior of X70 Pipeline Steel Design and Analysis of the Low-Speed Hydraulic Control System of 3.15MN Forging Press Design of a New Type Flexible Stretch-Forming Machine Effect of Lubrications on Quick Plastic Forming Behavior of AZ31 Magnesium Alloy Sheet Effects of Strip Thickness Difference on Deviation in Aluminum Hot Rolling Effects of Surface Roughness Microtopography on Formability in Cold Rolled Steel Sheet Forecast of Shrinkage Porosity of Aluminum Wheel Liquid Die Forging in Solidification Process and Process Optimization Hot Stamping and Blank Designing for a Vehicle Bumper Using Ultra High Strength Steel (UHSS) Investigation on over-Spray Powder of Spray Formed Al-22Si-5Fe-4Mn-3Cu-1Mg Alloy Study on Design Parameters of Strip Wound Prestressed Die Based on Fatigue Theory Study on Texture of AZ80 Magnesium Alloy Induced by Multi-Axial Forging Study on the Flow Stress of the High-Mn Austenitic Steel during Hot Deformation Study on the Parameters of Piercing Die with Finite Element Method The Effect of Pre-Strain and Strain Aging on Properties of X100 Line Pipe A Review of Liquid Forging Process Development of Intelligent Control of Optimum Parameters in Deep Drawing of Sheet Metal Using Genetic Algorithm and Finite Element Methods Development of Secondary Controlled Hydraulic Pressure Forming of Sheet Metal for Energy Saving and Re-Utilization: Effect of Initial Position of the Counterpunch on T-Shape Hydroforming Effects of Mandrel Structure on Ring Rolling Process for Large-Scale T-Sectioned Ring with Numerical Simulation Effects of Process Parameters on Wall Thinning Ratio during One Pass Hot Power Backward Spinning for 7075 Cast Aluminium Alloy Tube FEM-Based Analysis on the Process of Tube Stamping Finite Element Analysis for 40 MN Die Forging Press Finite Element Analysis of Main Stand of 140 Pipe Rolling Mill and Split Casting Flow Stress Models Analysis for Metal Powder Forming Simulation Investigation of Effective Parameters of Spring-Back in CK67 Steel Sheet Metal Using Finite Element Method Parameter Optimization of the Injection Molding Process for a LED Lighting Lens Using Soft Computing Plastic Instability Criterion of Radial Ring Rolling Pulse Current Auxiliary Tensile and Bulging of Light Metal Alloy Rolling Force Prediction System of Cold Rolling Process Based on BP Neural Network Use of Acoustic Energy in Sand Casting of Aluminium Alloys Study on Conventional Domed Bursting Disc Material and Burst Pressure Test Numerical Simulation of Stress-Strain of AZ31 Mg Alloy Profile during Warm Tension-Rotation Bending Process Small Module Involute Spline Processing with Position Requirements Research on Key Processing Technology of Nuclear Power Tapered Cylinder Forging Chapter 22: Materials Machining A Theoretical Model of Grinding Force and its Simulation An Experimental Study of Cutting Forces in Ball-End Milling of AISI H13 Analysis on Milling Stability Performed under the Conditions of Positive and Negative Process Stiffness Chip Formation Simulation in FE Modeling for Machining FRP Composite Cutting Force Modeling and Prediction in End Milling Including Flank Wear Effect of Microstructure on Cutting Force and Chip Formation during Machining of Ti-6Al-4V Alloy Experiment on Surface Roughness and Acoustic Emission Signal in Infeed Period of Cylindrical Plunge Grinding Experimental Study on Hardness of Titanium Alloy Ti-1023 by Milling Grinding Parameters Optimization of Stainless Steel Surface Based on Grey Relational Analysis Machining Simulation of Equal Base Circle Bevel Gear Using Disc Cutter Math Modules Establish for BUR Edge Chamfer and its Grinding Process Modeling and Analysis of Machining Force in Elliptical Vibration Cutting Modeling of Force on Axial Power Ultrasonic Honing Research of Bearing Crown Roller-Raceway by Non-Uniform Interelectrode Gap Electrochemical Mechanical Machining Research on the Relation between Cutting Parameters and Axial Cutting Force in Helical Milling Process Research on the Rock Breaking by Double Disc Cutter Test-Bed Simulation on Material Removal during Reciprocating Traveling WEDM of Insulating Ceramics Static and Modal Characteristic Analysis of a Horizontal Machining Center Study on Machinability of Pre-Hardened Plastic Mould Steel The Analysis of Static and Dynamic Characteristic in Grinding Head of Roller Machine The Influence of Variable-Speed Waveforms on Vibration Suppression in Time-Varying Speed Cutting Drilling Simulation of Carbon Fiber Reinforced Plastic Composites Based on Finite Element Method Experimental Investigation of Effect of Gear Milling Parameters of Al-B4C Composite Gears on Surface Roughness Investigation on Delamination Factor in Drilling Medium Density Fiberboards with Variable Feed Pressure Using Multi-Spindle Drill Parameter Recognition and Optimization of Residual Stress Prediction Model Based on Genetic Algorithm Prediction of Surface Roughness on CNC Turning Based on Monitoring of Cutting Force and Cutting Temperature Study on the Ultrasonic Characteristics in the Contact Interface under Ultrasonic Cutting The Effect of Tool Geometrical Parameters on Cutting Temperature Based on Deform-3D The Nano-Cutting Mechanism Research of Polysilicon Based on Molecular Dynamics Chapter 23: Welding & Joining An Investigation on Vacuum Brazing of Dissimilar Nonferrous Metals of Cu and Al Effect of Magnetic Field Current on Microstructure and Properties of AZ91 Magnesium Alloy Welded Joint Effects of Welding Heat Input on 22MnB5 Steel with Hot-Dipping Al Coating Influence of Reflow Soldering Process Parameters on the Lead-Free Reflow Profile Life-Cycle Energy Analysis as a Method for Welding Joint Design Modeling and Simulation on Temperature Control System for Hot Pressure Welding Weld Seam Deviation Detection Base on Laser Welding Pool's Centroid Analysis of Organizations of Brazed Seam 5052 Al Alloy Contact Reactive Brazing Bayesian Probabilistic Approach to FE Model Updating of Vehicle Typical Spot Weld Structure Experimental Study of Effect of Adhesives on Strength of Composites Adhesive Joints Fracture Behavior of High-Frequency Welded Joints of GH4169 Alloy Mechanism Research on Residual Stress's Elimination of Aluminum Alloy Welding by Ultrasonic Modeling and Analysis of Underwater Wet Weld Process Based on Regression Method Numerical Simulation Research of Tailor-Welded Blanks Orthogonal Experiment of Resistance Microwelding of Insulated Copper Wire and Phosphor Bronze Sheet Progressive Failure Analysis of Adhesively Bonded Laminates Joints with Spew Fillets Properties Effect of 16MnR Steel Weld Joint by Different Welding Methods Research on Welded Pipe and Tube Pass Design Virtual Methods The Friction Welding Characteristic Analysis of the Al 7075-T6 According to the Spindle Speed and Upset Pressure The Temperature and Residual Stress Distributions of Butt Weld Pass on Nickel Alloy 690 Plate The Welding Track Planning and Motion Control of T-Type Tube Autowelding Machine Three-Dimensional Numerical Simulation of Temperature Field and Force Field of T-Type Turbe during Welding Vacuum Brazing of Copper Tubes Using Ag-Cu Filler Influence of Fluctuation Frequency on Stress Corrosion Cracking of X70 Pipeline Steel Welding Joint The Characteristics of Weld Metal Zone Welded with Various Filler Metals Chapter 23: Welding & Joining A Method Based on the Morphology of Lead-Free Solder Powder Adhesive Particle Segmentation Research for Viscoplastic Behaviors of SAC405 Pb-Free Solder Chapter 24: CAD/CAE/CAM A New Method for Minimizing Cogging Torque in Permanent Magnet Machines Using Genetic Algorithm Ab Initio Molecular Dynamics Simulations of Cu under Vacuum and 473~1573K Application of Interactive Orthogonal Design on the Aerodynamic Drag Optimization of Hatchback Car Application of Reverse Engineering for Redesigning and Manufacturing of a Printer Spare Part Computerized Numerical Control (CNC) Machining Engraving Processing of Surface Based on Master CAM Design and Analysis of the Spiral Staircase in Large Steel Structure Design of Upswept Aft-Body of Civil Transport Based on CFD Discrete Element Method Simulation of Mesomechanics of Railway Ballast during Tamping Process Experimental and Numerical Study of Railway Ballast Compactness during Tamping Process Finite Element Analysis of Light Cargo Van Frame Finite Element Analysis of Sealing Structures for SF6 Gas Insulated Switchgear Hand Sketching in 3D Computer Animation Model Rendering and Editing Mohr Strength Theory in Simulation Stress Analysis Numerical Simulation and Optimization of Steel Pipe Cathodic Protection under the Condition of 3.5% Brine Point-Based CAD/CAM Geometric Model Design Simulation Calculation of the Braking Performance of Portal Cranes Based on ADAMS Surface Extension in Smoothing of Class a Surfaces for Auto-Body The Optimal Design of Injection Mold Gate Based on CAE A New Method to Handle Temporal Planning in Flexible Graphplan Framework A Universal Feature Definition Frame for 3-D CAD Model Conversion Combination Regression and Neural Network for Short Term Load Forecasting Four - Wheel Steering Vehicle Modeling and Simulation Based on ADAMS Multi-Dimensional Analysis of NOx and Soot Formation in a Diesel-Fueled Hydraulic Free Piston Engine New Downhole Intelligent Throttling System Based on the Poppet Valve Numerical Analysis of Flat Circular Parachutes Inflation Process Point Cloud Data Preprocessing Based on the Geomagic Research on Three-Dimensional Topology Optimization for the Bed of NC Gear Shaper The Development and Simulation of the 3D FEM Software ---- Alpha System The Reliability Evaluation of Threaded Connections in Challenging Drilling by Three-Dimensional Finite Element Analysis The Research of Deformation Compensation of the Unloading Mechanism of the Beam for XK-2535 Large-Scale CNC Gantry Milling Machine and Engineering Application Development of CAD Module for Gating System of Iron Castings Based on Sinovation Construction Method of Tool Path Based on Arc-Cell A Parting Surface Design of Multi-Cavity Mold Based on Pro/E Surface Technique Chapter 25: Modeling, Analysis and Simulation of Manufacturing Processes Air Flow Field and Fiber Motion in a Swirl Die Melt-Blowing Process An Identification Method for Joint Parameters Based on Finite Element Analysis on micro-/poly-Crystalline SiGe Alloy Solar Cells Dynamics Influences Discussion of Robot MiniQuad-II for Construction Member Structure Change Based on ADAMS Effects of Structural Parameters on Nanofiber from a Multihole Electrospinning Setup Numerical Simulation Analysis on Repairing Hole of UAV Wing Optimal Production LineLayout Model Based on Integer Programming Research and Application of the Structural Optimization Design Technique for the Large and Efficient Band Sawing Machine Research of Modeling and Simulation of Aviation Ignition Equipment Simulation of the Nozzle Electro-Hydraulic Servo Valve with ITI-SimulationX Simulation on the Hydraulic System of a Constant Tension Waves Compensation Winch Study on the Formability Rules with Precise Die Face for the Inner Clutch Shell of Automobile Study on the Pressure Distribution on Solid-Plug Conveying of Centrifugal Extruder The FEA and Optimal Design of the Loader Based on Virtual Prototyping The Micro-Variation Principle of Mating Constraints and its Application to Simulation of Cumulative Deviations for Mechanical Assemblies The Spent Fuel Pool Analysis of Chinshan Nuclear Power Plant by Using TRACE/FRAPCON-3.4 The Study of Mechanism Analysis and Dynamical Simulation Based on Ultrasound Enhanced Supercritical and Subcritical CO2 Dissolution Design and Simulation of Rinsing Equipment of Cable Rolling Wire Rope Design of Compressed Air Dehumidifying Equipment for Wire Rope and Simulation of Air Knife Flow Field Effect of High Frequency Electromagnetic Fields on Liquid Steel in Soft-Contact Mold Effect of Insulators on the Power Consumption and the Oxygen Content of Si Ingots in Czochralski Growth Feasibility Analysis and Simulation of Minitype Combination Balance FEM Based Numerical Simulation of Delta Parallel Mechanism Finite Element Analysis and Experimental Study of an Electromagnetic Shell Part with Flow Control Forming Finite Element Analysis of Frame on ZXZ90 Towing Machine for Cable Optimization Design for the Longitudinal Structure of LED Light Guide Plate Using Soft Computing Partial Least Squares Regression Analysis of Thermal Distortion Behavior for Linear Motor Drive Feed System Single-Machine Scheduling to Minimize Makespan with Deterioration Jobs and Multi-Maintenance Activities Solute Distribution Ahead of Interface during Heteroepitaxial Growth The Effect of Damping Block Design on Stability of Ploymer Coextrusion Process The Modal Analysis for the Third Type of Internal Gear Motor The Simulation Study of the Influence of Surface Error on Optical Properties for Optical Part Theoretical Analysis on Manufacturing Hypoid Left-Hand Gears by Generating-Line Method Co-Simulation of Composite ABS Control for In-Wheel Motor Drive Electric Vehicle Based on Threshold Control Algorithm Design and Analysis of a CFRP Drive Shaft Research on Vibration and Sound Radiation from Submarine Functionally Graded Material Nonpressure Cylindrical Shell Numerical Investigation for Fracture Saturation in Multilayer Sedimentary Rock in Unsymmetrical Case Numerical Simulation for Rock Fracturing Process under Action of Disc Cutter The Preventing Coal and Gas Outburst Technology of Middle Distance and Low Permeability and Upper Protective Layer The Roof Broken Mechanism of Fully Mechanized Coal Face with Super Thick and Loose Layer Research and Prediction of Yellow Soil Moisture Content in Guizhou Province Based on ARIMA Model Energy Analysis and Optimization of Methyl Chlorosilane Separation The Optimization of CO2 Huff and Puff Well Location in Ultra-Low Permeability Reservoir Prediction of the Flow, Reaction and Heat Transfer for Glass Furnace Firing Petroleum Coke A Coke Quality Prediction Model Based on Support Vector Machine Research on Materials Corrosion Failure Model of Liquefied Natural Gas (LNG) Cylinder for Vehicle Simulation Studies on the Influence of Impact Velocity on the PELE Penetrated and Broken Reinforced Concrete The Failure Finite Element Analysis of Pump Collision with Valve in the Oil Well Pump The Main Structure Design and Motion Simulation of Spreaders Based on Virtual Prototype Technology The Modal Analysis of the Main Steel Structure of Bucket Wheel Stacker Reclaimer Distribution of Stray Current in the Buried Metallic Pipeline Based on Inducted Electric Field Design of Terraced Spinneret Based on Simulation of Electric Field Distribution in Electrospinning Micro Injection Molding and Strength Check of Polymer Micro-Needle Simulation Analysis on Height Change of 6010 Aluminum Plate Limit Drawing under Different Process Parameters Optimization and Improvement of Pile and Pull Coefficient Mathematical Model for Trapezoidal Stainless Steel Sieve Bar Virtual Processing of Fish Fillets Integrated Kinematics Optimization and Strength Analysis for a Wheel Loader Boom Mechanism Numerical Simulation on Thermal Field in the Fluidized Bed with Internal Heating Plates Modeling and Analysis of the Scavenging System for a Two-Stroke Cycle Hydraulic Free Piston Engine The Effect and Analysis of the Crankshaft Journal Fillet Rolling for Runout The Study of EDG GH3536 Surface Roughness Base on the Artificial Neural Network Modeling The Damage Evolution of the Flange Repaired Reinforcement Laminates The Research on Dynamic Simulation of Rods and Cones Type Docking Mechanism Reservoir Modeling and Numerical Simulation Controlled by Flow Units A New Operational Pattern Optimization Method and Its Application in Nonferrous Metallurgy Spectral Element Approximation for the Eigenvalue Problem of Hydrogen Atoms Electronic Structure Chapter 26: High-Speed/Precision Machining, Inspection and Control Technologies A Template-Matching-Based Fast Algorithm for PCB Components Detection Abrasive-Free Polishing of Hard Disk Substrate with H2O2-K2S2O8-NaHSO3 Slurry Aspherical Surface Contact Detection Error Analysis Deep-Hole Precision Honing of Difficult-to-Cut Materials Effect of K2S2O8 on Material Removal Rate in Abrasive-Free Polishing of Hard Disk Substrate Electrochemical Deburring of Miniature Holes Numerical Analysis of the Ultrasonic Honing Chatter Based on the Stribeck Model Quantitative Analysis of Lateral Setting Error in Two-Point Method Simulation Analysis of Thermodynamics on the Belt Spindle of the Machining Center The Effect of Geometric Error on Machining Accuracy for Machining Center Virtual Gear Measurement Center and its Application A Novel Method for Kinematic Optimization of Camshaft Non-Circular Grinding Comprehensive Test of Electric Spindle Based on Thermal Stress Estimation of the Time Constant of Precision Plunge Grinding in Dwell Period Based on Acoustic Emission Measurement Experimental Investigation on Thermal Characteristics of Hollow Ball Screw in Different Working Conditions Inflection Points Processing of Continuous Tiny Line Segments for CNC System High-Speed Machining Research on the Influence of Harmonics on High-Speed Permanent Magnet Motor Study on Spindle Dynamic Errors of Domestic NC Machine Tools Study on Ultrasonic Cavitaion Field of Power Ultrasonic Honing Research and Application of Dynamic Secondary Cooling Control Method for Slab Caster of CISDI The Improvement of Laminar Cooling System for Hot Rolled Strip Base on Rolling Process Experimental Research on Acoustic Parameters and Saturation of Gas Hydrate-Bearing Sediments Study on Flaw Detection in Welding Zone of Diamond Saw Blade Study on Reaming High-Precision Thin Hole in Hardened Steel by Ultrasonic Vibration Reamer Development of an Automatic Inspection System for Manufacture of Plastic-Container Pump Assemblies Finite Element Analysis of Contact between Laying Head Pipe and High-Speed Wire Rod Research on the Normal Error of Large Aspheric Mirror Employed in Bonnet Polishing Chapter 27: Laser Processing Technology Dry Sliding Wear Behavior of Laser Clad WC/NiCrBSi Metal Matrix Composite Coatings Numerical Simulation of Feeding Powder Laser Cladding Temperature Field Based on ANSYS Optimizing BP Networks by Means of Genetic Algorithms in Quality of Laser Milling The Influence of Mixing Enthalpy on the Geometric Properties of Laser Solid Formed Ti-6Al-4V 3D Laser Remanufacturing of Damaged Parts Optimization on Selective Fiber Laser Sintering of Tri-Metallic Powders via Design of Experiments Method Current Progresses of Laser Assisted Machining of Aerospace Materials for Enhancing Tool Life Chapter 28: Products Design, Manufacture and Industry Analysis of New Features of Beer Packaging Design Innovative Vacuum Cleaner Design Using TRIZ Method Research & Design of the Multifunctional Landscape Hedge Trimmer Assessment System of Remaining Life for Bridge Crane Based on the Internet of Things Characteristics of Marks on Concave Key Duplicated by Machine Conceptual Approach for Design, Fabrication and Testing of Indoor Remotely Controlled Airship Deficiency Analysis of Different Ship Types Based on Taiwan PSC Data Design and Experiment of Sinonovacula constricta Purification Bacteria System Improvement of Packaging Structure and Materials about Daily Chemical Products Plastic Hose Packaging Improvement of Structure and Material about Plastic Emulsion Pump for Daily Cosmetic Products Packaging Optimization of a 17m Catamaran Based on the Resistance Performance Research on High-Grade Anti-Counterfeiting Scratchcard Invoice Printing Technology and Craft Research on the Influence Factors of the Wave Collar Style SCA Based Exploratory Evaluation of Weapon Equipment Operational Effectiveness Slip-Resistance Assessment on Different Types of Emery Anti-Slip Strip Study on a New Type Massage Device The Development of Santana 2000 Lighting Test Rig The Research on the Application of Kansei Engineering in the Product Design The Security and Function Improvement of Suitcase Based on Human Factors Engineering Variation Analysis for a Manufacturing Stage Based on a Balanced One-Way ANOVA Model Weave and Process Design of Monolayer Two-Sided Velvet Fabric Research on Material Selection and Sizes Optimization of Casing Material for Fracturing Wells under Existence of Brine Corrosion The Application of Parstat 2273 Electrochemical Workstation in Corrosion Experiment Research on Improving the Pass Yield of the Manufacturing of 0645 Type of Sharpener Analysis of Current Situation of Digital Sculpture Development Analysis of Snow-Ice Characteristics and Clearing Performance on Urban Road Chapter 29: Mineral Materials, Mining and Mineral Process Engineering Experimental Study on Coal Entry with Water Trickling and Burst Cracked Roof Supported by Anchor Net Gaseous Fluorides Formation Mechanism in the Roasting Process of the Fluorite-Bearing Iron Concentrate Metallogenic Geological Characteristics and Metallogenic Model of Xiachen-Wangchangmu Fluorite Mine in Tiantai Basin, Zhejiang Province, China Mine Laneway Modeling and Realization Based on the Matlab Separate the Anshan-Type Low-Grade Hematite Ore With Process of Low-High Intensity Magnetic Separation and Reverse Flotation Method Study on Comprehensive Utilizations of Certain Complex Paragenic Tin Polymetallic Ore Mechanochemical Activation and Characterization of Low-Medium Grade Phosphorite Ore Various Morphology of Hierarchical Pore-Structured Compound: MCM-41/Diatomite and its Adsorption Behavior for Methylene Blue Preliminary Study on Leaching Mechanism of Manganese Using Ternary Compound Reductant Geostatistics Method for Identification of Minor Structure Seismic Attribute Late Accumulation of Kunbei Area in Qaidam Basin Study on Leaching Manganese from Low-Grade Manganese Ores Using Different Reductants Experimental Study on Gas Hydrates Dissociation in Sands by Depressurization Leaching of Low-Grade Manganese Ores by Using Two Compound Reductants The Study of the Factors which Influences the Dissolution Rate of the Halite Paste Thickening of Iron Tailings with Vibrating Lamella Thickener Corrosion Effect of Acid Rain on the Technical Properties of Mineral Aggregates The Analysis and Correction of Sampling Bias of Discontinuity Orientation Caused by Linear Sampling Technique

「Nielsen BookData」 より

• NII書誌ID(NCID): BB13304632
• ISBN:
  • 9783037856925
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 4 v. (3625 p.)
• 大きさ: 24 cm
• 親書誌ID:
  • BA24926058