Advances in applied science, engineering and technology : selected, peer reviewed papers from the 2013 International Conference on Applied Science, Engineering and Technology (ICASET 2013), May 19-21, 2013, Qingdao, China
Author(s)
Bibliographic Information
Advances in applied science, engineering and technology : selected, peer reviewed papers from the 2013 International Conference on Applied Science, Engineering and Technology (ICASET 2013), May 19-21, 2013, Qingdao, China
（Advanced materials research, v. 709）
Trans Tech Publications, c2013
- : pbk
Available at 1 libraries
Note
Includes bibliographical references and indexes
Other editors: Zonghua Wang, Qingbin Yang, Yiqian Wang and Peilong Xu
Description and Table of Contents
Description
The volume contains papers selected from 2013 International Conference on Applied Science, Engineering and Technology (ICASET2013) held in May 2013, Qingdao, China. The papers focus on research fields including Chemical Engineering and Technology, Advances in Chemistry Research, Material Science and Engineering, Computer Science and Technology, Electronics and Information Technology, Industrial Technology and Engineering, Management Science and Engineering.
Table of Contents
Preface and Conference Organization
Chapter 1: Advanced Chemical Engineering and Technologies
Synthesis of Graphene Nanocomposites with Sandwiched Electroactive Methylene Blue for Electrochemical Application
Hydrothermal Synthesis of Visible Light Active SnO2-SnS2 Nanocomposite Photocatalyst for the Reduction of Cr(VI) in Water
Template Synthesis and Electrocatalytic Properties of Palladium Hollow Spheres
Synthesis and Characterization of Ferrous Tungstate Nanoparticles
Chemical Methods for Synthesizing Gold Nanoparticles
Influence of La Doping on the Apparent Activation Energy of -Al2O3 during the Densification Process at Constant Heating-Rate
Synthesis and Characterization of Triethanolamine Borate
Hydrophobic Flexible Silica Aerogels Felts Fabricated by Ambient Pressure Drying
The Synthesis and Purification of 4-Dimethylamino-N-Methyl -4-Stilbazolium Tosylate
Optimization of Reaction Conditions for Preparing Carboxymethyl Cellulose Guaze
Ultrasensitive Determination of Rutin on Ag Nanoparticles- Poly(p-aminobenzene sulfonic acid)/Graphene Modified Glassy Carbon Electrode
Aromatic Components Analysis of HongDao Clam by HS-SPME and GC-MS
The Influence of Auxiliary Chemicals on the Decolorization of Reactive Blue Dye by Laccase
Electrochemical Synthesis of Platinum-Reduced Graphene Oxide Hybrids for Methanol Oxidation
Epitaxial Graphene Growth on 6H-SiC (0001) Substrate by Confinement Controlled Sublimation of Silicon Carbide
Characterization and Investigation of Polyamide 6 Nanotubes Prepared by a Novel Solution Wetting Method
Photocatalytic Degradation of Methyl Violet with H3PW6Mo6O40/SiO2 Sensitized by H2O2
Highly Efficient Oxidation of Toluene to Benzoic Acid Catalyzed by N-Hydroxyphthalimide and Oxime in PEG -1000-Based Dicationic Ionic Liquid
Theoretical Calculation of Electronic Structure and Chemical Bonding in Tetragonal Phase KNbO3
A Comparative Study of UHMWPE Multifilament and Aramid Multifilament
The Influence of Introduction of Polyethylene Glycol on Synthesis of Bimodal Mesoporous -Al2O3
Study on Preparation of Ni/C Composite Powder by Electroless Plating Compound Complex Agent
Avoidance Test for the Assessment of Microbial Degradation of PAHs
MeAPO4 Berlinite as an Effective Catalyst for Mild Oxidation of Cyclohexane
Mechanism of the Oxidation of Iron
Synthesis of Viscosity-Variable Diverting-Acid Main Agent and Diverting Performance Evaluation
Chapter 2: Material Science Engineering and Technologies
High-Density Li0.95Na0.05FePO4 Cathode Material Synthesized by Co-Precipitation and Microwave Heating
Effects of Processing on Fiber Distribution and Mechanical Performance of Engineered Cementitious Composites (ECC)
Research on Grinding Surface Roughness of Nanoceramic Coatings
Research on Grinding Residual Stresses on the Surface of Nanostructured Ceramic Coatings
Slow-Release Behaviors of Poly(vinyl alcohol)/Poly(N, N-diethylacrylamide-co-methacrylic acid) Semi-IPN Materials
Graphene-Silicon Schottky Junction Fabricating by Laser Reduced Graphene Oxides
Hot Deformation Behavior and Microstructure of U720Li Alloy
Defects in Germanium Nanocrystals Produced by Ion Implantation
Effect of Graphite Degradation on Thermal Analysis Cooling Curve of Ductile Iron Melt
MnO2/Graphene Nanocomposite for Use in High Performance Lithium-Ion Batteries
Grain Growth Behaviour of Superalloy U720Li under Continuous Heating Conditions
Study of Properties of Nanostructured and Conventional WC-12Co Coatings Deposited by HVO/AF
Effect of Sintering Parameter on the Microstructure and Electrical Properties for Bi2Se3 Topological Insulator Crystals
Monte Carlo Simulation of Seebeck Coefficient and Electrical Conductivity in Thermoelectrics
Crystal Growth and Optical Spectroscopy of Ytterbium-Doped Lutetium Orthophosphate
First-Principle Calculations for Magnetism of Mn-Doped Graphene
ADP Single Crystal Growth from Solution in Defined Crystallographic Direction
Growth and Thermal Characterization of Yb:Y0.923Lu0.071VO4
First-Principle Study on Magnetic Properties of TM-Doped 6H-SiC
Motion Analysis of Powder Particle in Plasma Jet
Chapter 3: Yarn, Fabric Materials and Technologies
Study on the Relation between the Properties and the Blended Ratio of Newdal Fiber/Fine Polyester Blended Yarn
Study on Moisture Transfer Properties of Polyester-Cotton Fabric
Preparation and Characterization of Electrospun Poly(vinyl Alcohol)/Silk Fibroin Nanofibers as a Potential Drug Delivery System
The Tensile and Surface Frictional Property of Soybean Protein Fibers
Test and Analysis of SPF Pure Yarn or SPF Tencel Blending Yarn Mechanics Property
The Mechanical Property of Milk Protein Fiber Pure Yarn and Blended Yarn
A Study of Wearabilities of Softwarm Heating Warm Fiber Fabric
Performance of Newdal Blended Knitted Fabrics
Study on Properties of Blended Fabrics Containing Phenolic Fiber
Chapter 4: Industrial, Manufacturing Technology and Engineering
A Differential Evolution Based Optimization Algorithm for Production Planning Model in Defense Industry
Research on Aerodynamic Characteristics of Lateral Jet Control Technology
Research on Aerodynamic Characteristics of Morphing Aircraft with a Telescopic Wing
Analysis and Optimization of Plastic Parts Moldflow Based on Mold Flow
Fault Diagnosis of Drilling Process Based on Rough Set and Support Vector Machine
Application of Magnetic Flux Feedback Control in Hybrid Suspension System
Fast Tool Servo Driven by Electromagnetic Force Applied in Freeform Surfaces Machining
Multi-Objective Optimization Design of Multi-Layer Rectangle Micro-Channel Heat Sink for Single-Phase Flow and Heat Transfer
Study on the Coal Mine Ventilation Air Methane Utilization Technologies Based on Flow-Reversal Oxidation Principle
Study on Marine Diesel Engine Waste Heat Recovery System with Multi-Stage Flash
Investigation of Image Characteristics of Plume and Spatters during High-Power Disk Laser Welding
The Comprehensive Fire-Fighting Technology Research of the Section Retracement in Fully Mechanized Workface
Pressure Drop and Apparent Solids Concentration inside a Novel Multi-Regime Riser
The Influence of Plasma Arc Behavior on Ingot Top Surface Temperature Distribution during PAM Process
Study on the Buckling Analysis of Stiffened Spherical Shallow Shell for Gasholder Roof
A Preliminary Study on Preservation of Waxy Maize with Gas Package at Room Temperature
Using High Precision Tracer Test to Identify the Concentrated Runoff Channel in Mine Areas with Karst Water - Example of Fankou Lead-Zinc Mine, China
Kinematic Analysis of Lunar Exploration Manipulator
Application of Fault Tree Analysis Method in Gas Explosion Accident
The Calibration of Piezoelectric Phase-Shifter Based on the Improved 2-D FTP
The Design of an Automatic Golf Collection Robot
Optimal Control and Strategy of Operating Mechanism for Pumping Unit Intermittent Pumping
Fatigue Life of UAV Airframe Based on Damage Coefficient
Chapter 5: Intelligent Automation and Control, Power, Electronics, Communications and Information Technology Applications
Application of Fiber Bragg Grating Earth Pressure Sensor in Safety Monitoring for Electric Steel Tower Foundation
New Blind Adaptive Channel Estimation Schemes Based on OFDM Systems
New Channel Estimation Schemes for MIMO-OFDM Systems
Design of Intelligent Actuation Time Measurement for Low Voltage Electrical Apparatus
A Design of Controller about LED Landscape Lamp
Autonomous Marine Monitoring System Based on Energy Convertor
The Design of Fish Tank Thermostat Controller Based on TC89C52
Online-Testing System of Parameters in Aeroplane Ground Power Supply Based on Labview
Realization of the Optimization of Dijkstra Algorithm in Vehicle Navigation
Automatic PID Temperature Control of Thermoelectric Cooler Based on MSP430
Design and Implementation of Mid-Frequency Magnetron Sputtering Power Supply Based on TL494 and MCU
A Multi-Vehicle Tracking Algorithm Based on QPSO Clustering Algorithm and Particle Position Matching Template
Collaborative Optimization and Control of Integrated Microgrid with High Penetration of Distributed Energy
The Trust Relay QKD Network Communication Research
Simulation Research on Instantaneous Control in Battery Energy Storage System
The Design of a Rubik's Cube Robot
Research on the Key Technologies of Low-Altitude Airspace Surveillance and Navigation System
Innovative Teaching Research on the Course of Intelligent Control System and Simulation
Design of Intelligent Flushing System
Design and Production of AT89S52 Microcontroller Tachometer
The Design of Warehouse Temperature and Humidity Monitoring System
Development and Application of the Health Law Enforcement Information System Based on Information Technology
Decoupling Suspension Controller Based on Magnetic Flux Feedback
Development Research on Cloud Application Program Based on GFS
Combining Two Detectors for Object Tracking
Development of MEMS VOA with only One Shutter for Dual Signals Simultaneous Operation
Solvent Extraction of Uranium by Laminar Flow in Microfluidic Chips
Monolithically Integrated MEMS Optical Device with Switching and Attenuating Function
Algorithm of Hardy Function Interpolation and its Visualization in the Formation of the Virtual Battlefield Terrain
Research on Non-Manifold Polyhedron from Function-to-Form Mapping
The Influence of Package Atmospheres on Resonance Performance of Micromechanical Radial-Contour Disk Resonator
Chapter 6: Computational and Computer Science Technology, Simulation, Modeling, Algorithms
Depth from Defocus Using Geometric Optics Regularization
Image Classification Base on Sparse Representation with Basis Design
Computer Simulation of Complex Consecutive Reaction Kinetics
Uniform Blow-Up Rate for Diffusion Equation with a Weighted Localized Source
Image Stereo Matching Based on Multi-Scale Plane Set
A Novel Image Contrast Restoration Algorithm for Fog
Bayesian Estimation of Gold Index's Change Point of Time Series Model
A Novel Cache Sharing Scheme and Implementation in Multi-Core Real-Time Linux System
The Application of Wavelet Transform and the Adaptive Threshold Segmentation in Image Change Detection
Simulation and Evaluation of DSSAT Model under Long-Term Continuous Maize Production for Agricultural Intelligent Decision Support
Accelerating PQMRCGSTAB Algorithm on Xeon Phi
Sampling Theorems of Wavelet Subspaces with M Band in Higher Dimensions
Application of Three-Dimensional Modelling in the Study of Complex Geological Body
Gauss-Newton Iteration Estimation to the Parameters in Nonlinear Regression Models
Study on a Rapid Real-Time Feature Extraction Algorithm
Using Excel to Evaluate Shear Strength Parameters of Soil
Robust Guidance Control for Nonholonomic AGV Based on First Order Dynamic Sliding Mode Techniques
Neuron Classification Based on Semi-Supervised FCM Algorithm
A Novel Differentiate Weight Algorithm on Heterogeneous Network Selection
Numerical Analysis on Load-Displacement Curves of Pile Bearing Uplift Load with Expanded Plates
Efficient Dynamic Data Possession Checking in Cloud Computing
Optimal Design of Control Parameters for Extended Range Munitions Using Improved Genetic Algorithm
A Analysis and Research on the Methods of Object Oriented Software Testing
Sensitivity Analysis to Attribute Values Based on Grey Correlation in Multiple Attribute Decision Making and its Application
A De-Nosing Algorithm of Wavelet Threshold Based on Efficient Threshold Function
Analysis and Research of Intrusion Detection System Based on Association Rule
Forecasting the HS300 Stock Index with Radial Basis Function Neural Network Using Two-Stage Particle Swarm Optimization
Research of State-Base Object-Oriented Software Testing
Self-Revised Opinion Leader List Construction and Influence Analysis
Cloud Computing Security Analysis and Reinforcement of Hadoop Environment
Symmetric Multiwavelet Frames with General Lattice
A Robust Image Watermarking Algorithm Based on PCA and NN
Simplified Calculation Methods about Bottom Surface Size of Shallow Foundation Bearing Eccentric Load
Flight Control System for UAV Based on Simulink
Distributed Construction for Power Aware Connected Dominating Set
Analysis of the Process of Collapse in Supervision Control Systems
ScanSAR Mode Sea Ice Image Segmentation
Chapter 7: Management Science Engineering, Economics, Logistics and Business Applications
Analysis on Preception and Model for Service Quality in Chain Supermarkets Visited by Customers in China
Reviews and a New Angle of Coefficient Prediction Method
Study on the Property Management Problems and its Countermeasures in Small City of China
Study on the Influence Factors of Satisfaction Level to City Property Management in China
Structural Equation Analysis of Major Factors of Chinese Commercial Banks Reengineering
Performance Evaluation of Private College Teachers Based on Analytic Hierarchy Process (AHP)
Study on the Evaluation of Coordinated Development of Economy-Environment Composite System among Chinese Provinces
Empirical Research on Roof Reclamation by Land-Lost Farmers in Peri-Urban Areas of China
The Analysis of a Shares Logistics Enterprises' Financing Structure
The Employment-Driven Effect on the Establishment of China's Strategic Petroleum Reserve - Preliminary Measurement Based on Chinese Input-Output Tables
The Stability Analysis and Planning for Multivariable Linear Time-Delay Systems and its Application in Supervision Oilfield
Research on Improved Shapley Value Based Profit Allocation of Agricultural Supply Chain
Natural Disaster Risk Management and Sustainable Development Research of Huangshan Scenic Area
Application of Intelligent Decision Support System in Enterprise Management
On the Feasibility of Introducing Commercial Insurance into Major Sports Events
Thinking of Speeding up Transformation Construction for Housing Industry - Based on the Perspective of Housing Industrialization
Effect of China's Commercial Banks' Diversified Revenue on Performance
The Relationship between Oil Consumption and Employment - Based on Data from Twenty Provinces
Optimal Pricing Problem of a Closed-Loop Supply Chain with Remanufacturing
Analysis of Evaluating Bid Price of Reasonable Lowest Price in Construction Project Bidding
Analysis on Small and Medium-Sized Enterprise Passive Financing Cause and Capital Optimization Path
Research on Impcact of Interest Rate Marketization to SME Financing
Study of Energy-Saving Reform in Garment Production Enterprises
The Reliability Evaluation of Power System Based on Uncertain Linguistic Information
Chapter 8: Medicine and Health Engineering, Biology Technology
The Synthesis of Cephalosporin Intermediates THZ
Microbial Transformation of Saponins in Dioscorea zingiberensis for Diosgenin Production with Trichoderma reesei
Studies on the Biological Characteristics of Termitomyces Albuminosus Hypha
Study on the Conditions of Glucoamylase Production of the Rhizopus oryzae by Solid State Fermentation
Time Series Analysis of Pulmonary Tuberculosis Incidence: Forecasting by Applying the Time Series Model
Effects of Water-Soluble Dietary Fiber to Wheat Dough Rheological Properties
Stress Emotion Recognition Based on RSP and EMG Signals
Expression Clone of TMEM16A as a Calcium-Activated Chloride Channels in CHO Cells
Predictive Efficiency Comparison of ARIMA-Time-Series and the Grey System GM(1,1) Forecast Model on Forecasting the Incidence Rate of Hepatitis B
Rg3 Monomer as a Chemotherapy Drugs Sensitizer to Acute Leukemia Cells
Expression of CD4+CD25+T Regulatory Cells and Foxp3 in Peripheral Blood of Patients with Rheumatoid Arthritis Patient
The Expression of Decoy Receptor 3 in Peripheral Blood Monocytes of Rheumatoid Arthritis Patient
Response Surface Methodology for Extraction Optimization of Phyllostachys pubescens Bamboo Shoots Protein
Study on the Function of miRNA-155 Target Using Bioinformatics Methods
The Application of Neural Network in the Bionic Control System of an Artificial Heart Based on Neuroshell
Effect of Adding Seeds During Maceration on Quality of Wine From Vitis Vinifera CV. Cabernet Sauvignon
A Epidemic Model with Inhomogeneity and Mobility Based on Cellular Automata
Antioxidative Principals of Extracts from the Fruit of Viburnum awabuki
Quantification of Total Flavonoids, Total Phenolic Compounds and Antioxidant Activity of Extracts from the Seed of Viburnum odoratissimum
Antioxidant Potential and Bioactive Compounds in Extract and Fractions from the Fruit of Smilax china: an Underutilised Edible Berry
Study on the Degumming Process of Abelmoschus Manihot (L.) Medik by Microwave-Assisted Treatment
Graphene Modified Molecular Imprinted Electrochemical Sensor for Specific Recognition of Bovine Serum Albumin
Removal of Silica Bodies on Oil Palm Empty Fruit Bunch Surfaces and Application for Biogas Production
Chapter 9: Environmental Protection and Resource Development
Environment Pollutant Standard: The Production Planning within Certain Pollution
Bioavailability of Vanadium in Alfalfa in V-Cd Contaminated Soil
Applying AHP and Maximal Value Normalization to Evaluate Intensity of Urban Land Use in Sujiatun District, Shenyang City
Analysis of Agarwood Waste at Different Pre-Treatment for Silica Xerogel Production
Applying Ecological Niche Suitability Model to evaluate Land-Use Fitness
Study on Environmentally-Friendly Snow-Melting Agents Application
Classification and Prediction of Economic Losses - Storm Surge Disasters in Guangdong Province of China
Influence of Rainfall Infiltration on Landslide Treatment Engineering
Preliminary Study of Groundwater Pollution about Sewage Irrigation at Malong County
Review of Key Technique Research on the Field of Vegetation Restoration in Beach Wetlands
The Research of Decentralized Wastewater Treatment Mode in Rural Areas in China
by "Nielsen BookData"