Advances in manufacturing science and engineering : selected, peer reviewed papers from the 4th International Conference on Manufacturing Science and Engineering (ICMSE 2013), March 30-31, 2013, Dalian, China

Author(s)

• International Conference on Manufacturing Science and Engineering
• Liu, Xianghua
• Zhang, Kaifeng
• Li, Mingzhe

Bibliographic Information

Advances in manufacturing science and engineering : selected, peer reviewed papers from the 4th International Conference on Manufacturing Science and Engineering (ICMSE 2013), March 30-31, 2013, Dalian, China

edited by Xianghua Liu, Kaifeng Zhang and Mingzhe Li

（Advanced materials research, v. 712-715）

Trans Tech Publications, c2013

• : [set]
• Part 1
• Part 2
• Part 3
• Part 4

Note

Includes bibliographical references and indexes

Description and Table of Contents

Description

The present volumes provide up-to-date, comprehensive and worldwide state-of-the art knowledge of the manufacturing science and engineering, including: Metals and Its Alloys, Composites and Polymers, Functional Materials, Energy Materials, Environmental Materials and Environmental Protection, Biomaterials and Microbiology, Processing Technologies of Materials and Minerals, Analyze and Design of Structures Strength and Robustness, Theory and Practice of Application, Technologies of Measuring, Detection and Monitoring in Industry, Mechatronics, Industrial Robots and Manipulators, Control and Automation in Manufacturing, Industrial Design and Product Design, Green Supply Chain, Energy Saving and Low Carbon, etc. The volumes will not only provide the readers a broad overview of the latest advances but also provide the researchers a valuable summary and reference in this field.

Table of Contents

Preface and Conference Organization Chapter 1: Metals and Its Alloys Effect of Fluoride Conversion Coating on Corrosion of Behavior of Mg-Ca-Zn Alloy Effects of Electrolyte Plasma Carbonitriding on Tribological Properties of High Speed Steel Modification of Stainless Steels Surface Layers by Nitriding and Carbonitriding Heat Treatments of W6Mo5Cr4V2Si High Speed Steel Temperature Prediction Model for Molten Steel in RH Refining Process Technique Equipment Parameters Design of Titanium & Titanium Alloys Oxidizing for Large Area and Batch-Type Production Study on Mechanical Properties of High Aluminum Zinc-Based Alloys with Different Al Contents Ranging from 30 wt% to 50 wt% Modeling of Non-Isothermal Austenite Formation in Cr5 Roller Steel Asymmetric Cyclic Deformation Behaviors of Hot-Rolled AZ91 Magnesium Alloy in Rolling Direction The Study of Ferrosilicon Alloy Sediment Horizon Metallographic Etchant Study on Preparation of Ferrosilicon Alloy Deposition In Situ Melting Salt Production Power Electro-Deposition Methods Influence to Ferrosilicon Organization The Phase Transformation and Magnetic Properties in Ni-Mn-In Alloys Deformation Heating and Its Effect on the Processing Maps of Ti-15-3 Titanium Alloy Study of Precipitation in the Heavy Plate of VN Micro-Alloyed HSLA Steel Extreme Pressure Property of Rare Metal Zirconium Friction and Wear Behavior of 45# Steel with Different Plant Abrasive Effect of Single Pass Hot Rolling on Goss Texture Development in Twin-Roll Cast Silicon Steel Strip Test Study on Fatigue Property for Forging and Casting Steels of Grade E Experimental Research on Hot Working Property of Monel K-500 Alloy Study on Microstructure and Mechanical Properties of 35CrMnSiMo Cast Steel Development of Wear Resistant Cast Steel and Its Study on Mechanical Properties Chapter 2: Composites and Polymers Preparation and Tribological Performace of Microcapsules of Butyl Stearate and Melamine-Formaldehyde Resin Preparation and Characterization of Nanocrystalline Cellulose/Natural Rubber (NCC/Nr) Composites Effect of Surface Oxidation at 1500 DegreesC on Flexural Strength and Thermal Shock Resistance of the ZrB2-SiC-ZrC Ceramic Product Distribution and Sulfur Migration in Rubber Pyrolysis Synthesis and Characterization of Ethyl Cellulose Based Acrylate Self-Recovery and Re-Degradation Phenomena for PZT Ceramic Properties of Water-Soluble Core-Materials Applied for LRTM Preparation and Characterization of Novel Naturally Renewable Resin Acid Based Monomer Study on the Nanocomposite Foam of Cardanol Phenolic Resin and Organo-Modified Montmorillonite Research on Bandwidth of 1-3-2 Piezoelectric Composite with Multi-Mode Seed Adsorption Synthesis and Characterization of PMMA/PAN Particles with Core-Shell Structure Polythiophene-Coated Polystyrene Core-Shell Nanoparticles with a Rod-Shaped Polythiophene Shell Study on Electrical Properties of Activated Carbon Black Filled Polypropylene Composites Using Impedance Analyzer Effect of Carbon Black Surface Treatment on the AC Electrical Properties of PP-Based Composites Synthesis and Rheological Properties of Poly (AM-TBAM-NMMAD) Random-Block Copolymer Effect on Flame Retardancy and Mechanical Properties of PA6 Nanocomposites with Addition of OMMT and PFR Calculation of Internal Stresses of Continuous Fiber Reinforced Composite Materials in Longitudinal Loads Study on Preparation and Properties of Ramie Fiber Reinforced Composites Thermo Physical Properties of Copper/Diamond Composites Fabricated by Spark Plasma Sintering Chapter 3: Micro/Nano Materials Study on Attenuation Characteristic of Carbon Nanomaterials Smoke to Laser Analysis for Extinction Capability of Carbon Nanofibers by Moment Method Solid State Chemical Reaction Synthesis and Characterization of Nanocrystalline Cerium 8-Quinolinolate Synthesis and Micro-Wave Absorption Properties of BiFeO3 Coated Fe Nanocapsules Synthesis of CoPt Nanoparticles by Reduction of Co(CH3COO)2 and Pt(acac)2 Preparation of Monodisperse Iron Nanoparticles at Low Temperature Hydrothermal Synthesis, Characterization and Optical Properties of Zn-Doped CdS Dendritic Nanostructures Energy Transfer of PVK/ SiO2 Nanometer Composite Films Chapter 4: Functional Materials Research on the Activation System of Lead-Acid Battery Preparation of La0.75Sr0.25Cr0.5Mn0.5O3- Nanometer Powders by Sol-Gel Method and Research about its Electrochemical Performance Ferroelectric and Ferromagnetic Properties and Magnetoelectric Coupling Effect of the Ba0.8Sr0.2TiO3/CoFe2O4 Heterostructure Film by Radio-Frequency Magnetron Sputtering Effect of Temperature and Applied Bias on Deflection of PZT Actuators with Different Metal Slides Synthesis and Characterization of a New Amino-Functionalized PMO Material Synthesis of Sodium Tungsten Bronze via Hydrothermal Method Assisted by Citric Acid Effects of Annealing in Different Atmosphere on the Near-Infrared Shielding Properties of CsxWO3 Particles Theoretical Study on Ni2XIn (X=Mn, Fe and Co) Magnetic Shape Memory Alloys by Ab Initio Calculations In Situ Testing and X Rays Radiation Effects of Pt/Bi3.15Nd0.85Ti3O12/Pt Ferroelectric Capacitors Study on Preparation of Octyltrimethoxysilane Characteristics of 2D Cylindrical Photonic Crystals Band Gap with Square Lattice Chapter 5: Energy Materials Numerical Simulation of Nc-Silicon PIN Solar Cells with AMPS-1D Electrochemical Performances of Li4-xKXTi5O12 (x=0.02, 0.04, 0.06) as Anode Materials for Lithium Ion Battery GC/MS Analysis of Products from Catalytic Hydroconversion of Dagang Vacuum Residue with Y Zeolite The Effect of Boric Acid Addition on the Performance of a Gelled Electrolyte Thermodynamic Behavior of SiH2Cl2 in Polysilicon Production by Siemens Process Electrophoretic Deposition of TiO2 Films on Metal Mesh for Dye-Sensitized Solar Cells Aluminum Hydride Polymorphs: Preparation, Characterization and Thermal Properties Effect of Heat Treatment Technology on Property of Sodium-Sulfur Battery Cathode Carbon Felt Enhanced Light Absorption and Minority Carrier Lifetime for Pn+ Multicrystalline Silicon by Treatment with HF/H2O2-Based Solutions Chapter 6: Surface Engineering/Coatings Improvement of Working Efficiency of Cutting Tools by Modifying its Surface Properties by Application of Wear-Resistant Complexes Correlation of the Microrelief of the Surface of Structure and Magnetic Properties of Oxidic Coverings on the Titan Research on Load-Carrying Performances of Magnetic-Fluid Lubrication for Mill Oil-Film Bearing Non-Smooth Characteristic on Biological Surface and Development of Bionics Non-Smooth Diamond Bit Laser Glazing of Peacock Blue Glaze on Porcelain The Temperature-Sensitive Behaviors of SMPU/PNIPAM Semi-IPN Films In-Situ Synthesized WC Particles Reinforced Fe-Based Composite Coating by Argon Arc Cladding with Tungsten Powder Experimental Study and Modeling of the Zinc Coating Thickness Research on the Relationship between Bionic Surface Friction Coefficient and Interface Medium Improving the Efficiency of the Cutting Tools Made of Mixed Ceramics by Applying Modifying Nanoscale Multilayered Coatings Plating Hard Chrome Plating Alternative Technologies - HVOF Tungsten Carbide Coating Prediction of Leakage Based on the Change of the Surface Topography Study on Al Coating and Black Passive Film on Steel Surface Chapter 7: Environmental Materials and Environmental Protection, Biomaterials and Microbiology Study on Browning Degree of Fresh-Cut Purple Sweet Potato and its Inhibition during Storage Preparation and Research of Porous Hydroxyapatite Whiskers/KGM Composite Bone Scaffolds Beneficiability Study of the Blast Furance Dust from Tangshan Iron and Steel Company The Manufacture and Nutritional Analysis of the Solanum tuberosum Jam with Material Properties Effects of Temperature on the Growth and Product Accumulation of Chlorella sp. A Theoretical Model Research of Rice Water Stress Index Based on Automated Infrared Thermal Imaging Rapid Biomimetic Deposition of Drug-Loaded Apatite Coatings Characteristic of Bamboo Paper Sludge by Means of Fourier Transform Infrared and Elemental Analysis Environmental Dyeing Technique - The Application of Low Liquor Ratio Dyeing Application of TOPSIS Model Based on Vague Set Entropy in the Evaluation of Groundwater Quality Spatial Distribution and Assessment of Soil Heavy Metals in Suburb Cropland, Suzhou City, Anhui, China As Pollution Evaluation of Vegetable Planting Soil in Suzhou City Copper Pollution and its Assessment of Roadside Soils in Suzhou City Analysis and Assessment on Heavy Metal Contamination of Tuo River in Suzhou Combined Corrosion and Fatigue Degradation of Nitinol Implants Effect of Wet Storage on Return Yellow Performance of High Yield Chemical Pulp Removal of Cadmium Ions from Aqueous Solution by Nanostructured Carbonated Fluorapatite Bearing Siliceous Phosphorite Effect of Membrane Bending Stiffness on the Deformation of Erythrocytes Rapid Identification of Microorganisms Isolated from Pickled Vegetables by MALDI-TOF Mass Spectrometry Assessment on Pollution Level and Ecological Risk of Heavy Metals in Pond Sediment of Suburban District The Preparation of Micro-Molecular Dextran in Sub-Critical Water/CO2 Supercritical Carbon Dioxide Extraction of the Fatty Acids from Pacific white Shrimp Waste (Litopenaeus vannamei) Preparation of -Polylysine Modified Silica Nanoparticles Screening of Biosurfactant-Producing Bacteria Time Change Rule and Source Identification of Nitrogen and Phosphorus Pollution on Huihe River in Suzhou City Adsorption of Cr Ion by Activated Carbon Prepared from Corncob Xylitol Residue Adsorption of Corncob Hydrolysis Residue on Cr (VI) Evaluation of the Measurement Uncertainty of Monosomic Ginsenosides in Ginseng First Principle Study on Mn-Doped Ceria with Different Doping Concentration Chapter 8: Processing Technologies of Materials and Minerals Numerical Simulation and Process Optimization of Aluminum Alloy Connecting Rod Based on ProCAST Research of the Grinding Mode Applied by the Cranfield BoX Ultra Precision Grinding Machine The Discussion of the Relationship between Grinding Efficiency and Three Kinds of Factors in the Mill Method & Case Study of Cutting in Offshore Structural Member Removal Study on Short Stroke Control in Roughing Stage of Continuous Hot Strip Rolling Micro Machining Simulation Analysis by Finite Element Method Chemical Mechanical Grinding Wheel for K9 Optical Glass Research Status and Development Trend of Magnetically Controlled Welding Technology Experimental Study on NO Pre-Oxidation in C3H6/NO/N2/O2 Mixture by Non-Thermal Plasma The Optimized Design of Manufacturing Process of Shrub Scrimber XPS and Spectroscopic Ellipsometry Study of Composite SiNx/DLC Prepared by Co-Deposition of RF Magnetron and Filtered Cathodic Arc Research on the Processing Method of the Special Tool Pear-Shaped Needle in Spinneret Manufacturing Industry Process Optimization and Properties of Laser Cladding High Vanadium High Speed Steel Coatings on Nodular Cast Iron Hot Forging Die Composite Manufacturing Technology Simulation Analysis of Four Teeth End Mill Cutting Process Based on the FEM Method Microstructures and Mechanical Properties of Al-12.7Si-0.7Mg Alloy Welded Joints Modeling and Numerical Simulation Research on Hollow Steel Ingot Forging Process of Heavy Cylinder Forging Research on Simulation Process of Rock Broken by TBM Hob Research on Bending Angels of Laser Peen Forming without Confine Layer The Impact Analysis of Stamping Process Factors Based on Dynaform Microstructure and Mechanical Properties of Al-12.7Si-0.7Mg Alloy Welded Joints Using Homogeneous Welding Wire An Approach to Improve Thickness Uniformity of TA15 Tubular Part Formed by Gas Bulging Process Study of Hot Deformation Behavior in GH4169 Superalloy Springback Distortion Research on Offset Strip Fin Based on ANSYS Characteristics of YAG-MIG Hybrid Welding 6061 Aluminum Alloy with Different States Device and Experiment of Incremental Draw Forming of Dish Thermal Deformation Property and Constitutive Model of AZ80 Magnesium Alloy Process Design and Thermal Performance in Deep Drawing of SiCp/2024Al Composite Sheet Using Pulse Current Heating Research and Application of Finite Element Method on the Simulation of Graded Self-Lubricating Ceramic Tools Comparison of Methods for the Sulfur Compounds and Elemental Sulfur Analysis in High-Sulfur Natural Gas Transient Liquid Phase Bonding of T91 Steel Using Two-Step Heating Process Study on Microstructure of a Gear Shaft during Hot Forging Process Laser Cladding Device for In Situ Repairs of Marine Crankshafts Effect of Finish Rolling Deformation Conditions on Microstructure Refinement of Ultra-Deep Drawing Hot Rolled Steel Sheets Study on Process Parameters of Low Frequency Torsional Vibration Tapping of Difficult to Cut Materials Analyse and Control Research about the Cause of Shape Defects on Hot-Rolled Strip Steel The Research on Two-Component Materials Mixed Method for Vacuum Casting The Prickle and Pressure Comfortability Evaluation of T/R/H Multi-Component Fabric Finite Element Analysis on Residual Stress of Laser Brazing Diamond Wheel Improved Flotation of Oolitic Hematite Ore Based on a Novel Cationic Collector Study on Cross-Flow Solid-Liquid Separation Technology Numerical Simulation for Distribution of Void Fraction in Water Model of Continuous Casting Mold Exploiting the Influence of Oxidization on Ultra-Fine Copper and Nickel Sulfide Containing Pt-Pd in Yunnan Mine The Optional Study of Refined Feldspar Processing from Kyanite Tailings The Research and Evaluation of Double Excitation Inorganic Adjustable Plugging Agent Study on the Evaluation Method of Deep Profile Control and Flooding Effect The Construction, Problems and Solutions of Yunnan Germanium Technology Chain The Influence of Cooling Water Flow to Purify the Metallurgical Grade Silicon by Directional Solidification The Kinetic Research on the Disperse Dyeing Process for PLA Fabric Numerical Simulation of Low-Permeability Fractured Reservoirs on Imbibition Die Compensation Design for Stamping a High Strength Automotive Bumper Inner Chapter 9: Building Materials, Construction and Architecture Investigation and Design Analysis on Residential Area Lighting in Dalian Study on Large Stadium Space Layout Planning The Role of the Media Facade Art in the Development of the City Dynamic Stability Analysis of Steel Concrete Composite of Ribbed Shell under Stepped Loads Dynamic Stability Analysis of Steel-Concrete Composite Ribbed Shell Research on the Architectures and Murals of DongYue Temple in Jin Memorial Temple Gymnasium Building Materials Performance-Type Research Interactive Analysis between Steel-Concrete Composite Deep Beam and Steel Frame Study on Humanization Design of Overall Kitchen Comparative Analysis of Different Types of Rigid-Pile-Reinforced Embankments Study on the LED Media Facade in Urban Space Using Analysis Study of Seismic Inversion Technology Forecasting Sandstone Waterborne of Coal Roof The Study on the Warm Mix Asphalt Mixture Ratio Research on Longitudinal Cracking Behavior of Prestressed Cconcrete Hollow Slab due to Cyclic Loading Experiment Design and Heat Transfer Property of the Warming Compound Blocks Contained Slag Concrete The Study of Correction Method for Soil-Water Characteristic Curve of Swelling-Shrinking Soil Succession and Development of the Traditional Commercial Centers Study on the Architectural Design with the Conception of Low Carbon Ecological Development of Building Materials The Standardization of Government Supervision Procedure in Construction Engineering Quality (Security) Effect of Foaming Temperature and Holding Time on Foam Glass Creating Structural Analysis Model from IFC-Based Structural Model Properties of Alkli-Activated Slag Cement Compounded with Soluble Glasses with a High Silicate Modulus Numerical Simulation of Masonry Wall under Explosive Load inside Study on Preparation of Construction Waste Paving Brick Research in the Preparation of Paving Bricks with Construction Garbage Use of Septic Tank Sludge as Raw Material in the Manufacture of Bricks Economic Indicators Optimization of Rectangular Concrete Filled Steel Tubular Axial Compression Components Probability Assessment of Analysis of High-Rise Buildings Seismic Resistance The Effect of Utilization of Geogrids on Reducing the Required Thickness of Unpaved Roads Building Energy Conservation Technology Based on Solar Energy Utilization Dewatering Design and Discuss of Foundation Pit Excavation in Disposal Site with Contaminated Soil Bearing Capacity of Concrete-Cored DCM Pile Composite Ground The Birth and Use of Concrete and Reinforced Concrete Study of Surface Modification of Recycled Aggregate and Mechanical Properties of the Resulting Concrete Performance Analysis of Reinforced Concrete Structures Strengthened with BFRP Bulk Density of Bitumen Sheets Application of Catastrophe Theory in Surrounding Rock Stability Resistance of Soil to a Vertically Vibrating Pile Technology Research on the Subsidence Control of Abutment Back under Seismic Liquefaction Conditions Chapter 10: Analyze and Design of Structures: Strength and Robustness Research on Recrystallization and Crack Fracture of Single Crystal Turbine Blade Simulation and Experimental Mechanical Properties of SiCn/2024 Al Alloy Co-Continuous Composites Three-Dimensional Modeling and Finite Element Analysis of the Hydraulic Support Fatigue Analysis of the Bridge-Type Grab Ship Unloader Based on Finite Element Method Analysis of the Design Method for the Casual Anchor Skeleton at the Closure for PC Continuous Box Girder Bridge Modal Analysis of Compressor Impeller with Crack and Blade Fracture The Finite Element Analysis of a Shaft Numerical Simulation of Deflection Fracturing with Finite Element Method Considering Crack Initiation Angle Static Characteristics Research of Bed with Three-Point Support Using Bionics The Finite Element Analysis of Pile-Raft Foundation after Optimization of the Raft Thickness Stiffness Calculation of Boiler Horizontal Support Impact Resistance Research of Composite Laminate Structure Transmission Parameters Optimization Design and Load Factor Formula Fitting of WN Gears Drive Influence of Screw Spacing on the Strength of Self-Drilling Screw Connection for the High Strength Cold-Formed Steel Pressure Cooker with Composite Bottom Thermo-Mechanical Coupling Simulation Determination of Residual Fracture Toughness of Post-Fire Concrete Material Flaw Sizing by Ultrasonic Multipath Detection The Broyden Method for M-P- Relationship of Beam-Column with Residual Stresses A Software of Pre-Buckling Analysis of Laminated Plates and Shells Based on Stiffness Matrix Determinant Structural Analysis and Improvement of Large-Scale Forklift's Wheel Rim Based on Micromechanical Damage of Experimental Study on 20 Steel Notched Specimen's Acoustic Emission Characteristics The Progressive Optimization Model on the Corrosion Rate of the Grounding Grid Research and Application of Material Corrosion Prevention Technology in the Completed well System for Sour Gas well Chapter 11: CAD/CAE/CAM: Theory and Practice of Application Solidworks Engineering Drawing Automatically Adjust Technology and Implementation Research of 3D Parametric Design System of Worm Drive Based on Pro/E The Study of ANSYS-Based Finite Element Calculation Model for Push-Back Rack FEM Analysis of Hydraulic Dismantling Feasibility on Shaft-Sleeve Interference Fits Research on Precise Constraint Reconstruction of Section Data Numerical Simulation on the Flow Field inside an Ultrasonic Water Meter Finite Element Analysis of the Car Door Sinking Stiffness Handling and Roll Prediction of Electric Drive Mining Trucks A Simulation Platform for the Development of Vehicle ACC Systems The Helmet Reverse Forming and Static Characteristic Analysis Study on Entity Model's Fast Surface Reconstruction Parametric Design System of Precision Forging Gear Die Design and Development of the Loading Subsystem in FEM System A Static-Stability Analysis Method for Ships Based on the Second-Development of Solid Edge Finite Element Model and Fluid-Structure Interaction Analysis of the Intravascular Stent Exploration of Non-Revolved Parts Modeling Based on MBD and Pro/ENGINEER Cone Section Member Integration Design and Production Methods Based on OOA Modeling of Gantry Crane CAD System BIM-Based Integrated Design Software for the Steel Structure of Industrial Plant Second Development of Panel Furniture Based on Pro/E Chapter 12: Mechanical Engineering: Research, Development and Solutions Simulation Study about Dual Spark Plug Position for the CNG Engine Combustion Process Study on Numerical Simulation and Performance of the Secondary Throttle Choke Used in the Oil Field Simulation of Kinematics and Dynamics of Large-Displacement Motion Simulator Finite Element Analysis about the Influence that High-Speed Motorized Spindle Spindle System Material has on its Temperature Field Analysis on the Error of Semi-Infinite Body Model in Roll Flattening Calculation Numerical Simulation of Tip Vortex in Air Refueling Simulation and Analysis of the Hybrid Bus Performance Based on AVL-Cruise Design of Amplitude Transformer for Ultrasonic Vibration Milling System Based on ABAQUS Parameter Studies for Wheel Wear Using a Flexible Wheelset Testing and Modeling of Mechanical Parameters in Resistance Welding Machines Stability Analysis of Chatter System on Ultrasonic Honing Parametric Study of Graphite Insert Erosion Numerical Simulation of Two-Phase Flow under High Acceleration in SRM with Submerged Nozzle Numerical Simulation of Cavity Flow within the Flow Field Numerical Simulation of Flow in Imported Steam Turbine Inlet Components with Equilibrated Holes in High Performance 3D Numerical Simulation of the Influence of AGD Beams on Gas Distribution in COREX-3000 Shaft Furnace The Research on Structure Design of LED Fluorescent Lamp Microstructures Diffuser and the Effect on the Optical Properties Effect of the Light Diffuser Plate of Micro V-Cut Prism Structure on the Optical Property of LED Daylight Lamp Finite Element Analysis of Grinder Plate with Bone-Removal Facilities Development of an Advanced Machine Tool for Combined Forming-Strengthening Process for Production of Load Bearing Aircraft Panels Hybrid MPI + OpenMP Parallelization of Scramjet Simulation with Hypergraph Partitioning Intelligent Optimization Design on Brake Experiment Platform Design of Beam Waveguide Antenna Structure for TT&C Ship Stability Features of the Saucer-Shaped Blend-Wing-Body Aircraft WEDM Performance Analysis Based on Entropy Fuzzy Evaluation Impact Factors Analysis of Buildup Well Test in Low Permeability Reservoir Effect of the Ignition Time on the Turbocharged Lean-Burned CNG Engine Optimization of the Anode Current Collector Layer Thickness for the Cathode-Supported Solid Oxide Fuel Cell Numerical Simulation on Cylinder Flow Field of Diesel Study on the Motion Response of Buoy in Sea Condition Experimental Research on Belt Type of Precision Seed-Metering Device Research on Parameters Indentification of Synthesis Load Model Considering Distribution Network Connection The Study Based on LABVIEW of the Positioning Accuracy of Spinneret Microporous Fine Machine Study of Eddy Electromagnetic Fields Induced by Propeller Rotating in the Earth's Magnetic Field Nonlinear Dynamic Analysis of Rub-Impact Rotor System under Different Parameters The Analysis of the Pulverized Coal Deposition in the Pump Cylinder in Drainage and Mining of the Coal Bed Methane (CBM) Research of Potential Energy Recycling System on Port Tyre Cranes Designing Piezoelectric Harvesting Unit from Road Vibration The Development of the High-Voltage Modulators Based on TM703FB Vacuum Tube for Auxiliary Heating on HL-2A Numerical Simulation of Swirling Burner in Cold State Test of Coal Slime Pumping by Single-Screw Pump The Testing and Research of a New Large Bag Filter with the Diaphragm Valve The Research of the Dynamic Characteristics of Horizontal Jig Boring Machine A Cosserat Rod Model of Multi-Symplectic Structure and its Numerical Treatment Dynamic Analysis and Simulation of a New Steering Mechanism for Point-the-Bit Rotary Steerable System Transmission Ratio Optimization of Large Bus with Optimization Goal Normalization Processed Asymmetric Sinusoidal Motion Effect on Aerodynamics of a Plunging Airfoil Vibration Analysis of Complicated Rotor-Bearing System by Beam Element and Strain Energy Method Kinematics Analysis and Simulation of Main Components of Beam Pumping Unit Based on MATLAB Performance Simulation Comparison of Five-Plunger-Type and Three-Plunger-Type Straw Fuel Forming Machine Design and Testing of a Scroll Pump Efficiency Review on the Dynamics of High-Speed Motorized Spindle System Mode Analysis of Lattice Main Boom for Crawler Crane Based on ANSYS_WORKBENCH The Application Research of the Hydraulic Breaking Hammer The Underwater Vehicle Cabins Wave Loads Linear-Simplified Calculation Method Launch Dynamic Characteristic of High Initial Velocity Grenade Launcher with Low Recoil Study of Influence on Auto-Weapon Launching Performance by Nozzle Structure Analysis of Arc-Shaped Support Plate Influence on Muzzles Vibration of Gatling Gun Fire on Tripod Research on Dynamics of High-Efficiency Recoil-Reducing for Muzzle Brake of Chain Gun Modeling and Acceleration Response Analysis for Vehicle Drivability Reliability Analysis of Nuclear Power CNC Wheel Groove Milling Machine Based on Gray Theory Finite Element Analysis of the Spindle Ram-Slider Assembly Body on the Domestic Large Gantry Machine Tool Modal Analysis of the 1.5MW Wind Turbine Tower Structural Non-Probabilistic Reliability Analysis Based on Imperialist Competitive Algorithm A New Response Surface Method for Structural Reliability Analysis Design and Simulation of Piston Buffering Device for Impact Hammer Structure Design of Precision Horizontal Machining Center and Multi-Objective Optimization of Large Structural Components Axial Compression and Energy Absorption Characteristics of Reduction Tubes Using a Die under Impact Load Interval Perturbation Method to Structural Non-Probabilistic Reliability Analysis Numerical Research on Ship Motions in Oblique Irregular Waves Dynamic Characteristics Analysis of Axle Box Spring by FEM Effect of Wheel-Rail Contact Geometry Relationship on Vehicle Dynamic Performance The Dynamic Simulation and Strength Analysis of the Integrated General Suspension Rack Connector for an Ejection System Research on Ship Swaying Motion Prediction Based on Multi-Variable Chaotic Time Series Analysis Study on Precision Analysis and Simulation Test of Upper Slicing System Applied Research of the Microstructure Replication Technology Research on the Key Technology in Ultra-Precision Machining of Optical Micro V-Groove Mold Roller Chapter 12: Mechanical Engineering: Research, Development and Solutions Thermal Error Analysis and Compensation Technology for High Precision Aspheric Measuring Platform Blade Blending and Torsion Deformation Analysis Based on its Coordinate Measurement Data Modeling Aspects of Sound Speed in Air for Ultrasonic Industrial Applications Chapter 13: Thermal Engineering: Theory and Applications Three Calculation Methods for the Influence of Heat Loss by Infiltration Study on the Heat Transfer Performance of Two Kinds Material for Microstructure Heat Exchanger The Effect Analysis of Fin Arrangement on Thermal Hydraulic Performance of a Vehicular Cooler Performance Analysis of Solar Evacuated Tube Collector The Exergy Efficiency and Output Acoustic Power Performance Optimization of the Thermoacoustic Engine Micro-Cycle The Energy Consumption Investigation of the Hotel Central Air-Conditioning System and the Research of Energy Saving Measures Effects of External Window Form on Residential Building Energy Consumption Thermodynamic Performance Analysis of Stirling Engine with a Nodal Analysis Method Numerical Study on High Prandtl Number Liquid Bridge Numerical Simulation of the I-Beam during Cooling Process Temperature Distribution of High Prandtl Number Liquid Bridge under Zero Gravity Experimental Investigation on Effect of Stack on Thermoacoustic Conversion System Performance Chapter 14: Vibration, Noise Analysis and Control Order Vibration Analysis of High-Speed Spindle System Research of the Vibration Signal for the Bridge Structure Base on Stochastic Minus Method Investigation on Damping Characteristics of Double Chamber Hydro-Pneumatic Suspension Simulation and Experimental Research Research on Compression and Reconstruction of Wind Turbine Vibration Signal Based on Discrete Cosine Transform Research on a Building under Multi-Dimensional Seismic Excitations Optimum Vibration Control of a Nonlinear Damper System under Multi-Axis Excitations Parametric Studies of the Vibration Control Effects of a Nonlinear Damper System under Multi-Axis Excitations Study on Acoustic Characteristics of Aircraft Targets' Propulsion System Research on Anti-Seismic Analysis the Overall Structure of Three-Ring Roller Coaster Based on Response Spectrum Method Chapter 15: Mechanical Transmission: Theory and Applications The Contact Stress Analysis of Spiral Bevel Gear Strength and Stiffness Optimization of Heavy-Duty Gear The Method of Accurate Variable Curvature Crowning of Involute Straight Bevel Gear Error Analysis of Modification Gear Generated by Grinding Worm Wheel Optimization of Substituted Generating Lines of Cutting Hypoid Gears by Generating-Line Method Three-Roll Planetary Rolling Mill Motion Analysis and Test Research An Optimization Design Method of Gear Transmission Chapter 16: Electronics, Microelectronics, Optoelectronics and Communication Technology A Single Side-Band Modulation Circuit in Underwater Electric Current Communication Research on Improvement of the Next Generation IEEE802.11ac Channel Model A Three Phases Z-Source Inverter Topology Two Dimensional Photonic Filter with a Circular Resonant Cavity Design and Implementation of a Digitally Tunable Tracking Preselected Filter for Ultra Short Wave Receiver Modeling and Control of the Voltage Source Converter A Signal Generator Based on AD9850 A Study on 400V Sized Trench Power Semiconductor for Smart Power ICs High Accuracy Modeling Method of UTC-PD Photodiode A New Design of CMOS Bandgap Reference Based on Genetic Algorithm Design and Power Supply's Quality Analysis of the Automatic Power Distribution System Based on SSPC An Arc Welder Monitoring System Research and Design of High-Speed Camera Trigger Tunable Low-Pass MEMS Filter Using Defected Ground Structures (DGS) High Beam Quality and High Power Diode Laser Source The Spontaneous Radiation of Verticalcavity Semiconductor Optical Amplifiers in Bistable Effect Wave Shape Transformers Based on Transformation Medium Slabs Throughput Analysis of IEEE 802.11e Enhanced Distributed Channel Access (EDCA) under Unsaturated Condition in One-Hop Ad Hoc Networks Optimization of Power and Gain in Two-Stage Op-Amp by Using Taguchis Approach BiCMOS Flip-Flop Design Based on NPN-NPN Feedback Driver Circuits Chapter 17: Sensor Technology Analysis of Signal Distortion Caused by Opening Ratio Variation of Main Scale and Index Scale in Linear Encoder The Research about La0.75Sr0.25Cr0.5Mn0.5O3- Application as Dense Diffusion Barrier in Limiting Current Oxygen Sensors The Structure of the Hermetic Chamber in Convection-Based Tilt Sensor The Mobile Node Localization Algorithm Based on Monte Carlo Deployment of Wireless Sensor Networks for Air Quality Monitoring Research of Electromagnetic Flowmeter with Grounding Electrode Analysis of Quadrature Phase-Shift Error Caused by Angular Misalignment in Moire Linear Encoders WSN Collaborative Target Tracking Based on Dynamic Clustering The Applications of Sensor Network for Smart Substation Improvement Methods of Apparent Permeability of Ferromagnetic Core Single-Resistance-Controlled Quadrature Oscillator Using CFOAs for GMI Magnetic Sensors Dual-Mode Quadrature Oscillator Using Current Follower Transconductance Amplifiers for GMI Sensors Research on Rotation Modulation for INS Based on MEMS Sensors Application of Sensor on Modern Sizing Machine in Term of Intelligent Control Research on Direct Calibration of Electromagnetic Flowmeter in Partially Filled Pipes Using Numerical Simulation to Optimize the Design of Gas Turbine Flowmeter Sensor Optimizing Design of a New Micro-Structural Gas Sensor Analysis of Radial Thickness Vibration Modes of Piezoelectric Ceramic Ring Based on ANSYS Design and Implementation a Testing Environment for Wireless Sensor Networks The Effect of ESD EMP Test on Wireless Antenna and Protection Network Design Path Planning of Mobile Beacon for Localization Based on Distribution of Unknown Nodes Localization and Map Building of Laser Sensor AGV Based on Kalman Filter Chapter 18: Technologies of Measuring, Detection and Monitoring in Industry Application of Petrochemical Heat Equipments' State Inspection Based on Threshold Value of Infrared Image Segmentation An Improved Faults Diagnosis Strategy of Analog Circuit Online Using Kernel Fuzzy C-Means for the Unknown Fault Improved Method for State of Charge Estimation of Lithium Iron Phosphate Power Batteries Ballistic Measurement and Parameter Estimation of Ballistic Missile with Early Warning Satellite Tolerance Analog Circuit Hard Fault and Soft Fault Diagnosis Based on Particle Swarm Neural Network Application of Adaptive Fuzzy Filter in Ultrasonic Test System Analysis of Uncertainty in Standard Metal Tank Volume Verification with Monte Carlo Method Research on Tooth Profile Deviations Measurement Method Based on the Optical Image Measuring Instrument Summarize and Research on the Data Acquisition of Drilling Rig Hydraulic System Research on the High-Precision Phase Simulation of DSSS Signal Thermocouple Temperature Monitor System Based on PLC in Air Preheater Design and Implementation of Environmental Monitoring System Based on Bus The Improved Personnel Location Algorithm Based on RSSI A Two Dimension Signal Parameter Estimation Method Based on Super Resolution Technology Review on Meteorological Detector in Highway Mechanical and Electrical Engineering Design of Alarm Controllers in Detection and Alarm Systems for Gases A New Approach to Improve the Probability of Detection of Eddy Current Inspection The Applied Research of System Subtractive Clustering RBF Algorithm in Eddy Current Testing on the Conductive Structure Defect Quantitative Estimation with Lift-Off Effect in Conductive Structure Research of Benzoyl Peroxide Residues in Flour by Terahertz Spectroscopy Technology Study on Fault-Tolerant Technique Based on Knowledge Modules of Hydraulic Fault Theory Overview of Ultrasound Imaging Algorithms Based on Synthetic Aperture Focusing Technique Research on the Fault Diagnosis System for ICM Analysis of Hydrostatic Guideway Error Based on Multi-Head Pump Safety Analyzed and Detection Test of Unexploded Subprojectiles by Means of Some Metal Detector The Research of Signal Processing in Ultrasonic Nondestructive Testing and Evaluation Equipment/System Safety Design Process in Civil Aircraft Considering Structure-Support Requirements Constant-Stress Accelerated Life Test with Competing Risks under Progressive Type-II Hybrid Censoring Fault Prediction Based on Data Fusion Study on Method of Reconnaissance Effect Simulation for Infrared Imaging Equipment Research of Nozzle Divergent Section Detection Based on Modal Flexibility Curvature Difference Method Faults Diagnosis of Converter Transformer Based on the Vibration Method Chapter 19: Mechatronics Research on the Electronic Differential Control Strategy of Electric Vehicle A High-Performance Digital Servo Driver for Magnetic Levitation Planar Motor Design of the Vehicular Eletro-Optical Tracking Turntable Servo System and the Research on its Tracking Control Scheme Simulation Study on Jet Power Drive System of Quarter Vehicle Comparing Study on Performance of Brushless Doubly-Fed Generator with Different Rotor Structures Optimization Analysis of Structure Parameters for External Rotor DSPM Motor The Research on the Ignition System of Engine Combustion Bomb Research of the Tool Orientation Optimization with Kinematical Constraints Digital Machining Simulation for Francis Hydro Turbine's Blade Tool Path Generation for Local Interference Region Machining of Triangular Mesh Model Simulation Research on the Shift Schedule in the Auto with Automated Manual Transmission Based on Cruise Gear Shift Program Structural Design and Realization of Wheel-Legged Obstacle Crossing Vehicle Structure Design of Transmissive Switch-Zoom Infrared Systems Study of the Fuel Consumption of ECMS Applied to a HEV Study on the Intelligent Control Technology for Wet Dual Clutch Transmission Simulation and Analysis on Stationary Combination Valve of Heavy-Duty Vehicle Automatic Transmission New Design of Reduction Device of Column Electric Power Steering System Characteristics Analysis of Giant Magnetostrictive Actuator Applied in Jet-Pipe Servovalve Breaking Deceleration Control of Urban Rail Vehicle Based on Smith Predictor MEMS Scanning Mirror with Vertical Comb Actuator Based on Latching Technique Fast Response MEMS VOA with Grid-Type Shutter 1x6 Compound-Driven Optical MEMS Device for Multifunctional Fiber Optic Communication Genetic Algorithm Tuning PID Control of Magnetic Powder Clutch The Research of High Reliability Secondary Power on Orbiting Carbon Observatory Design and Implementation of the AMT Data Acquisition System Structure and Function Research on the Real Time Simulation of HEV Motor Pre-Charge Using an Embedded Control System Chapter 20: Industrial Robots and Manipulators Real-Time Forward Position Kinematics of the Spatial Parallel Manipulator Study on the Architecture and Motion Control of the Traverse Robot Design and Simulation Analysis of a Hybrid Manipulator Path Optimization of Spray Painting Robot for Zigzag Path Pattern The Study on the Communication of the Multi-Robot Polishing System by the ACO Mode Design and Development of the Trunk Spraying Machine Study of Co-Simulation of Rehabilitation Robot for Upper Limb Based on Virtual Prototype Proposal of Noncontact Operation Robotic Hand Using Permanent Magnetic Suspension Study of Barrel Bending Measurement and Correcting Model with PSD and Gun Barrel Robot Automatic Button Cell Sorting Manipulator System Research Based on Visual Servo Control Forward and Inverse Kinematic of Continuum Robot for Search and Rescue An Internal Model Control (IMC) Algorithm for Automatic Trajectory Tracking Realization of the Postprocessor of Intelligent Turning-Milling Combined Machining Cell Based on UG NX Simulation and Optimization Design of the Transplanting Manipulator Research on Kinematic of the Wheel-Legged Robot Based on Uneven Road Surface Chapter 21: Image Processing and Machine Vision Design and Implementation of the Cold-Rolled Aluminum Plate Surface On-Line Defect Detection System Complex Paper Disease Detection Based on Probabilistic Hough Transform Investigation of Factors Influencing Calibration Accuracy of Camera Texture Feature Extraction for Color Images Based on Quaternion Representation Mine Loadometer License Plate Recognition Based on MFF-DS Study of Motion Detection Technology Based on Davinci Platform An Improved Suppressed FCM Algorithm for Image Segmentation Moving Objects Detection and Speed Estimation in Intelligent Surveillance System Arabidopsis Growth Analysis Using Image Processing Technology An Approach to Detection of Solder Joints on Printed Circuit Boards Target Recognition Based on Polar Coordinate Template Matching New Camera Parameters Calibration Method of Binocular Vision System The Application Research of Robot Vision Target Positioning Based on Static Camera Calibration Research on Solder Joints Quality Detection of Auto Parts Based on Biological Vision Feature A Sequential Structure from Motion Algorithm for Static Scenes Based on VR-Simulation Chapter 21: Image Processing and Machine Vision Image Registration Method Based on PCA-SIFT Feature Detection Shot Cut Test Based on Mathematics Parameter and Chain Code Extraction Method of the Contrast Feature of Ship Wake Images A New Gradual Segmentation Algorithm of Fingerprint Image Chapter 22: Intelligent Optimization Design and Algorithm Local Piecewise-Linearity Prediction Method of Chaotic Time Series INS/GPS Integrated Navigation Method Based on Neural Network A Resilient Particle Swarm Optimization Algorithm with Dynamically Changing Inertia Weight Applications of Reservoir Sensitivity Prediction Based on Quantum Neural Networks Study on Application of Fast Intrinsic Mode Decomposition to Short-Term Load Forecasting Load Forecasting by Considering Wind Power Based on Sequential Time Classification LSSVM Model An Intelligent Algorithm Method of Element Layout Priority Sequence on Consoles Human Machine Interface A Hybrid Intelligence Algorithm for No-Wait Flow Shop Scheduling A User-Based Modeling and Analysis of Network Public Opinion Using Particle Swarm Optimization The Description and Characterization of Symmetric Frames and Gabor Frames and Applications in Material Engineering Semi-Orthogonal Parseval Wavelets Frames on Local Fields and Applications in Manufacturing Science Weight Determination Method Based on Principal Component Analysis Coking Large Subassembly Relocation for Finish Machining of Wing-Fuselage Joints in Digital Final Assembly of Aircraft Box Parts Manufacturability Evaluation Based on Feature Model Assembly Sequence Planning Based on Connector Structure and Ant Colony Algorithm The Research of a Two-Directional Vector-Valued Quarternary Wavelet Packets and Applications in Material Engineering More Efficient Methods among Commonly Used Robust Estimation Methods for Robust Unitary Linear Regression More Efficient Methods among Commonly Used Robust Estimation Methods for Similarity Transformation Chapter 23: Data Mining, Information Technologies and Computer Applications in Industry Research on Technology of Broadband Optical Fiber Access Network System A Fast Connection Construction and Update Algorithm A Study on CIF-to-BMP Format Transformation Algorithm Physical Layer Security Solutions for High Speed Data Networks An Empirical Study on Small Enterprises E-Commerce Adoption Decision Based on TAM Model & TOE Framework Research on Jiangxi Tourism E-Commerce Site Planning A New SVM Multi-Class Classification Algorithm Based on Sample Scale and Distribution Area Using Adaptive Scheme to Monitoring Dependent Steps with Attributes Data A GPU/CPU Programming Model for CFD Simulation JPEG DCT Compressiom Music Source Separation Based on Improved Sinusoidal Modeling The Search Technology of Query Expansion Based on the Agriculture Information A Model of Replication Creation in Distributed Networks Design and Implementation of Online Answering System Research on Method of Limit to Model Behavior Region in Virtual Environment Genetic Algorithm for Panel Cutting Stock on CUDA Platform Research on Trees Static and Dynamic Modeling Method Research on Simulation of Syncretizing Remote Sensing Information Vegetation Scene Integral Modeling for Entity of Trees Based on 2.5D Design and Implementation of a On-Orbit Service Oriented Dynamic Simulation Platform Research on Modeling and Simulation of Networked Air & Missile Defense Study on the Economical Distribution of Load Based on the Lagrangian Multipliers Chemical Reaction Optimization for Task Mapping in Heterogeneous Embedded Multiprocessor Systems Power System Data Quality Evaluation Based on the Analytic Hierarchy Process A Digital Filtering Approach in Measurement and Control System Research of the Finding Technology of Invocation Model and Data Model of Testing Systems Based on TTCN-3 Study of Connecting Rod Cracking Production Line Layout Planning System Based on VB6.0 Furnace Data Management System Based on WinCC User Archive Small Fluctuations Research of Internet AS-Level Topology Based on PFP Model Research on the Cloud Manufacturing Service Discovery for Industry Manufacturing System Based on Ontology Supervisory Information System Application in Power Plant On an Improved SPRINT Data Stream Online Classification Algorithm Availability Allocation for Distributed Clusters of the Cloud Infrastructure Personalization Information Retrieval Based on Topic Directory Complementary QoS Strategy Research and Application in Large-Scale Switched Networks Based on TSIP Protocol GPS Data Decoding Algorithm User Classification Prediction Research Based on Clustering SVM The Most Preferred Route of the Car Navigation System: A Systems Engineering Approach Analysis and Design of Intelligent Assessment System for Supplier Service Quality Application of Change Control Technology in Weapon Equipment Software Configuration Management The Interface Design of the Voice System Based on the TLV320AIC23 and CPLD Design of Data Acquisition System Based on PXI Bus and VC++2008 An Information Retrieval System Based on Portable Device Haptic Data Compression Based on Linear Prediction FRFT Based Method to Estimate DOA for Wideband Signal Reliability Analysis and Design of Facility Systems Based on Edge Failures: A Review EEG-Based Music Mood Analysis and Applications Chapter 24: Control and Automation in Manufacturing Design of Nut Machine Vision Inspection and Screening Systems Based on PC Design of Optimum Controller of APT Fine Tracking Control System Design of Cemented Carbide Face Automation Grinder Based on Constant Force Grinding and Online Measurement Technology The Design for High-Power Maglev Blower Controller The Application of Bluetooth in the Control System of the Smart Home with Internet of Things The Implementation of Permanent Magnet Synchronous Motor Direct Torque Control Research on Model Reference Robust Control for Multivariable Linear System Robust Adaptive NN Design for Course-Tracking Control of Ship with Input Saturation Monitoring and Management of Control System for Concrete Mixing Station Design of Control System for Concrete Mixing Station Back-Stepping Adaptive Attitude Control of Over-Actuated Spacecraft Study of Variable Structure Control Based on SVM Adaptive Feedback Control for a Class of Discrete Chaotic Systems Spray Experiment Control System Design of Exhaust Gas Desulfurization Based on PLC Design of Real Time Monitoring System in Urban Pipeline Networks Based on Wireless Communication DR Model Based Network Control System Design and Analysis with Time Delay and Data Packet Dropout Research and Application of Intelligent Control in Ceramic Kiln Temperature Temperature Control in Brazing Furnace Based on B-Spline Fuzzy Neural Network The Design of Remote Real-Time Intelligent Monitoring System Based on ARM and DSP for Precision Grinding Machine Simulation and Analysis of the Anti-Sway Control of Crane Ship Based on Adams and Matlab Co-Simulation Research of Approach for Fuel Transfer Integrative Control of Offshore Oil Platform Power System Design of Simulating Control System on Marine Oily Water Separator Application of PLC in the Control System of Fins-Former Chapter 25: Industrial Design and Product Design: Theory and Practice Exploration of Offbeat Funny Design on Daily Ceramic Products Material Analysis on Oil well Wellhead Assembly and Application in Thermal Production well Maturity Management Strategy for Product Collaborative Design The Application of Form Symbols in Furniture Design Psychoacoustic Properties Analysis on Interior Noise of High-Speed Trains Case Study on Improving Energy Efficiency of Garment Materials by Women's Wear Style Transformation Design Study on Simulation and Design of Fitness Entertainment Machine Based on the Fischertechnik Model and UG, ANSYS Incorporating Ergonomics Evaluation in Assembly and Disassembly of Repetitive Task: Focusing on Load Task Study on Industrial Design Method for Product Life Cycle Process Control Method of Complex Product Multidisciplinary Collaborative Design System Disassembly Evaluation Based on Principal Component Analysis The Study of Material Texture Image Model by Kansei Engineering A New Design of a Hydraulic Steel Radial Gate with Two Oblique Arms by Topology Optimization Design of Fixture Systems in Automotive Manufacturing and Assembly The Research of Product Concept Feature Modeling Based on Energy Saving Emotional Design of Modern Products Reflect Emotional Design Study on Soy-Milk Grinder Slip Resistance of Floors in a Supermarket An Evolutionary Game Study on the Sustainable Product Development in Remanufacturing Development of a Virtual Prototype of Surmounting Transport Vehicles Based on Solidworks The Transform of the Elements of Inspiration in Machinery Innovation Design The Color Research of Pharmacy Machine Based on Kansei Engineering User Knowledge Acquisition Research for Automotive Design Research on Automotive Design Chain Innovation Optimization Design of Automatic Transplanting Machine Based on TRIZ Modularization Analysis Approach of Product Family for DFMC Based on Complex Network Chapter 26: Transportation and Logistics Prediction of Traffic Volume in Highway Tunnel Group Region Based on Grey Markov Model The Evaluation and Analysis on Port Service Development - As Ningbo and Shanghai Port for Example The Design of Cigarette WMS Based on RFID Development of RFID Cigarette Pallet Warehouse System China's Railway Transportation Network Christopher Research A Modular Framework for a Bus Monitoring & Passenger Notification System Research on the Capability Evaluation of the Emergency Logistics Center Based on Linguistic Variables Chapter 27: Green Supply Chain, Energy Saving and Low Carbon Research on Sustainable Energy Development Strategy and Low Carbon Relationship The Application of Information Technology in Green Supply Chain Green Supply Chain Network Equilibrium Model with Genetic Algorithm Financial Subsidies and their Effects on Environment-Friendly Products Supply in Green Supply Chain Diagnosis Method and Empirical Study of Supply Chain Performance Based on Bayesian Network The Carbon Sink Estimation and Carbon Sink Increase Potential of Jiangmen, China Multi-Agent Applied Research in Agile Supply Chain Value Analysis on Inventory Information Sharing in Supply Chain Study on the Allocation of Carbon Emissions Based on the Supply Chain Profit Distribution Analysis of the Main Technical Ways of Automobile Energy Saving Chapter 28: Organization of Production and Engineering Management Manufacturing Resources Optimization Operation for Iron and Steel Enterprise Based on Green Manufacturing Service-Oriented Manufacturing Agility and Application Based Flexibility Workforce Flexibility Optimization in Chemical Plant Construction Process Secret of Chinese Manufacturing Innovation: An Analysis of SME Sustaining Competitive Advantage Research on Emergency Disposal Platform Based on Multi-Agent with a Cooperative Model The Construction, Existing Problems and Countermeasures of Germanium Ecological Chain in Yunnan The Layout Optimization of the Multi-Sized Operating Units in the Facility Based on Space Utilization Establishment about Short-Term Demand Predictive Model of Automobile - Based on Extensive Correlation Evaluation and Continuous Time Model Training Mode Design of ESP Teachers in Universities of Science and Engineering Research on the Equipment Manufacturing Industry's Interregional Industrial Linkages in the Bohai Sea Region Dynamic Efficiency Analysis of Coastal Container Terminal Enterprises in China Empirical Research on the Science and Technology Project Ex-Post Evaluation Index System A Study on Patent Storage Problems of Cooperation between Small and Micro Businesses and Universities in the Triple Helix of University-Industry-Government Relations - Based on Economic Order Quantity Model A Methodology Based on Resource Elements for Equipment Capability Analysis Oriented Virtual Cellular Manufacturing Systems Uncertainty Spread and Control of Complex Supply Chain Networks in Manufacturing Industry The Risk Management Method for Project Schedule of Aerospace Engineering Study on Examination Reform of Specialized English for Seafarers on International Ships Influence of Intellectual Capital on Technical Innovation Performance of Clustered Manufacturing Enterprises Simulations on the Spare Parts Inventory Management of Equipment Maintenance in Manufacturing Enterprise Based on Flexsim Developing Automated Production Management System for Manufacturing Green IT Products A Framework for Implementing Social Manufacturing System Based on Customized Community Space Configuration and Organization On Characteristics and Development Trend of Advanced Manufacturing Technology Research on the Destructive Leadership in Virtual Enterprises Application of PDCA-Cycle on the Management of Critical Values Reporting An Application of GMM Method in the Test of Relationship between Urbanization and Circulation Economic Growth Application of Elman Neural Network with HP Filter in the Trend Supply of Self-Provided Power Plant Forecasting in the Iron and Steel Industry

by "Nielsen BookData"

Details

• NCID: BB13315832
• ISBN:
  • 9783037857243
• Country Code: sz
• Title Language Code: eng
• Text Language Code: eng
• Place of Publication: Durnten-Zurich
• Pages/Volumes: 4 v. (3250 p.)
• Size: 24 cm
• Parent Bibliography ID:
  • BA24926058