Resources and sustainable development : selected, peer reviewed papers from the 2013 2nd International Conference on Energy and Environmental Protection (ICEEP 2013), April 19-21, 2013, Guilin, China

Author(s)

• International Conference on Energy and Environmental Protection
• Wu, Jianguo
• Lu, Xixi
• Xu, He
• 中越, 信和 ナカゴシ, ノブカズ

Bibliographic Information

Resources and sustainable development : selected, peer reviewed papers from the 2013 2nd International Conference on Energy and Environmental Protection (ICEEP 2013), April 19-21, 2013, Guilin, China

edited by Jianguo Wu ... [et al.]

（Advanced materials research, v. 734-737）

Trans Tech Publications, c2013

• : [set]
• Part 1
• Part 2
• Part 3
• Part 4

Note

Includes bibliographical references and indexes

Other editors: Xixi Lu, He Xu and Nobukazu Nakagoshi

Description and Table of Contents

Description

Collection of selected, peer reviewed papers from the 2013 2nd International Conference on Energy and Environmental Protection (ICEEP 2013), April 19-21, 2013, Guilin, China. The 677 papers grouped as follows: Chapter 1: Mineral Prospecting and Geological Exploration; Chapter 2: Rock and Mining Engineering, Coal Mining; Chapter 3: Mineral Process Engineering; Chapter 4: Oil and Gas Well Development Projects; Chapter 5: Metallurgical Engineering; Chapter 6: Urban and Regional Planning; Chapter 7: Development and Management of the Energy and Power Industry; Chapter 8: Global Climate Change and International Cooperation on Reducing and Control Carbon Emissions; Chapter 9: Ecological Economy, Circular Economy and Low-Carbon Economy; Chapter 10: Engineering Materials and Processing Technologies; Chapter 11: Equipment Design, Manufacturing, Automation and Control; Chapter 12: Information Technologies, Computer and Data Analysis Applications in Industry and Engineering; Chapter 13: Engineering Management, Logistics and Education.

Table of Contents

Preface and Conference Organization Chapter 1: Mineral Prospecting and Geological Exploration Variation of Wind Resistance Reliability of Foundation in Coral Sands The Study on Hydrous Pyrolysis Experiments of Coal-Measure Source Rocks in Ordos Basin A Method of Spatial Analysis of Fault Structure Based on 3D GIS A Research on Coal Reservoir Geological Modeling and its Application in Exploration and Development of the Coalbed Methane (CBM) A Study of Mineral Characteristics and Metallogenic Stages of Luziyuan Pb-Zn-Fe Polymetallic Ore Deposit, Zhenkang A Study of Ore-Controlling Factors and Metallogenic Mechanism of Lead-Zinc Deposit in Luziyuan, Zhenkang, Yunnan Analysis for the Global Distribution and Requirement of the Copper Resources Application of 3D Apparent Physical Properties Inversion Method in an Iron Mine Area Applications of Conventional Logs in Low Resistivity Contrast Tight Gas Reservoirs Identification Characteristics of Coal and Gas Outburst within Gas Geological Units in Qidong Mine Characteristics of Lead and Zinc Polymetallic Deposit and Wall Rock Alteration Zoning in Luziyuan, Yunnan Estimation of In Situ Stresses by Using Hydraulic Fracturing and Welllogging Data in Shizhuangnan Coalbed Methane Field Formation Age of the Qinling Complex and the early Paleozoic Tectonic Event Framework of Sequence Stratigraphy Sedimentary System and Evolution of Yimin Formation in Yimin Depression Geochemistry of Huyanshan Alkaline Complex, Shanxi Province, China: Evidences for the Sources of Magma Geochemistry of late Permian Coals from the Yantang Mine in Xuanwei, Yunnan, China Geochemistry of Sulfur in Extract from Hedong Coal Mine, China Geoelectrochemical-Extraction Measurement Method to Look for Hidden Lead-Zinc Ore Deposit and Prospecting Effect Geological Characteristics of Viscous Reservoirs & Mining Safety Technical in Northern Tibet Plateau Geological Factors Analysis of Gas Unusual Area in Southwest of Shandong Province High Resolution Sequence Stratigraphy of Silurian Strata in Tazhong Area Influence Factors Analysis for the Next 20 Years of Chinese Copper Resources Demand Influencing Factors of Chinese Aluminium Resources Demand in the Next 20 Years Late Cenozoic Faults and Shallow Oil Accumulation in the Nanpu Sag Ore-Forming Fluid System of the Anqing Cu-Fe Deposit, Anhui Province, China Paleo-Heat Flow Anomaly at the End of Middle Permian in NE Sichuan Basin, SW China: Did an Ocean Trough Exist? Research on the Natural Gas Enrichment Regularity of Es1 Layer in Yangxin Subsag of Jiyang Depression Researching on Geological Characteristics and Economic Significance of Jinla Pb-Zn-Ag Deposit in Cangyuan County, Yunnan Sedimentology and Coalbed Methane Geology of Middle Jurassic Coal Measures in Juhugeng Mine, Qinghai Province Sedimentology and Reservoir Characteristics of He8 Member, in a Gas Field of Ordos Basin, Northern China Sequence Boundaries Identification of Putaohua Oil Layer in Qijia-Gulong Area Structure Evolution of Qinjiatun-Qindong Fault System in Lishu Subbasin Study on Multifunctional Electromagnetic Prospecting Technology in Mineral Exploration Study on Primary Controlling Factors to Carbonate Reservoir Physical Properties of Zhanazhol Oilfield Study on Reservoir Characteristics of Shuguang Lower Hill The Analysis of Sedimentary System and Provenance of Saertu Reservoir in Jiangqiao-Pingyang Area in Northern of Songliao Basin The Analysis on the Evolution of Depositional Sequence in the Mid-Depth Formation under the Control of the Medium-Long Base-Level Change in Huanghekou Depression The Automatic Identification of Aperture in Carbonate Rocks The Present Conditions of Micro-Fine Disseminated Refractory Oolitic Hematite and Expectation The Saidu Gold Deposit of Southern Altai, China: Mineralizing Stages and Ore-Forming Fluids Evolution Tracing of the Deep Fluids in Western Tianshan by the Electron Microprobe Analyses of Omphacite Form High-Pressure Veins and Host-Rocks Well Logging Identification Methods for Volcanic Lithofacies in the North of Songliao Basin, China Paleogeolography of early Coal-Forming of late Permian in Chongqing Experimental Study on Microscopic Structure and Permeability of Tectonic Soft Coal The Seismic Facies in the Pliocene from the Shenhu Gas Hydrate Survey in the Northern Continental Slope of South China Sea Influence of Shale Gas Development on Land 3D Geological Modeling for Zhouan Cu-Ni-Pt Sulfide Deposit, Henan, China A Tentative Study of Relationship between Mantle Plumes, Supercontinents and Orogenic Gold Deposits Achieving the Logging Item's Sensitive Analysis of Complex Lithology by Using the Cross Plot Technique Aggregation Condition and Prediction of Favorable Area for Xujiahe Formation Shale Gas in Guangyuan Tenement Blank Area Analysis of Potash Resource Situations in China and Development of Yiliping Saline Lake in Qinghai Province Analysis on Grain-Size Characteristics and Sedimentary Environment of Conglomerate Reservoirs in Ying-4 Section of Xingcheng Gas Field of Songliao Basin Analysis on the Surface Subsidence Regular about Paste Filling Mining under the Buildings Application of Inversion after Limestone Hollow-Out in Pearl River Mouth Basin Assessment of Rare Earth Supply and Demand Relationships: A Literature Review Carbonate Depositional Facies Analysis and Reservoir Prediction for Central Block in Pre-Caspian Basin Characteristic Analysis of Texture and Structure of Ores and Genesis of Luziyuan Pb-Zn Polimetallic Deposit in Zhenkang, Yunnan, China Coal Resources and Tectonic Division of Ordos Basin Environmental and Economic Significance and Feasibility Analysis of Tight Sand Gas Reservoir in China Establishment of Isochronous Stratigraphic Framework of Fuyu Oil Layer in Toutai Oil Field and its Significance Evaluation of the Gas Content of Coal Reservoirs with Geophysical Logging in Weibei Coalbed Methane Field, Southeastern Ordos Basin, China Fluid Inclusion and Mineralization Epochs Studies of Luziyuan Pb-Zn Deposit in Yunnan Province, Southwestern China Geochemical Characteristics and Analysis of Tectonic Setting of Hannuoba Basalts from Chifeng Region, Inner Mongolia Geochemical Characteristics and Tectonic Implications of the early Permian Volcanic Rocks from Ongniud Banner, Inner Mongolia Geochemistry of Shales from Cambrian Mantou Formation, Northern Anhui Province, China Geological Statistics Study on Grade Variations in Ore Body 1 of the Macheng Iron Deposit, East Hebei, China High-Resolution Sequence Stratigraphic Division and Monosandbody Isochronic Correlation of Meandering River Delta of Fuyu Oil Layer in the Northern Honggang Hydrocarbon Geology Characteristics and Oil & Gas Resource Potential in the Afghan-Tajik Basin Influence of Deposition Characteristics in the Heavy Oilfield Development Stage Major Controls on the Evolution of the Cambrian Dolomite Reservoirs in the Keping Area, Tarim Basin Metallogenic Model and Prospecting Orientation of Aketasi Gold Deposit in Xinjiang Microbialites from the Upper Cambrian in the Tarim Basin, Northwest China: Implication for Depositional Environments Pi Decision Technologys Application to Profile Control and Water Shutoff in Jiyuan Oilfield Luo27 Well Field Chang4+5 Reservoir Potential Hydrocarbon Resources in Aral Sea Area in the North Ustyurt Basin Predict Channel Sand Body Distribution Characteristics of South Eighth District Based on RMS Amplitude Attributes & Frequency Division Regional Geology Background and Minerogenetic Series in Ongniud Banner of Inner Mongolia Research and Application on Model of Dynamic Controlling Sand in Surennuoer Area Research and Applications on the Theory of Shale Gas Depth Enrichment Zone Research on Character of Sandlayer in Heidimiao Oil Layer in Yingtai Area Research on the Relationship between Geothermal Field and the Tectonic in Himalayas and its Surrounding Regions Sedimentary Microfacies Analysis of Xingbei 1-3 Zone in Daqing Oilfield Sequence Stratigraphy of Jurassic Succession in Central Junggar Basin, China Tectonic Environment and Geochemical Characteristics of Geza Arc Magmatic Rocks in Sanjiang Orgenic Belt, SW China Tectonic Evolution and Coal-Bearing Series Hosting Status Analysis on Coal Basins in Eastern Heilongjiang Province in China The Application of Induction Logging Adaptive Deconvolution Processing in Water Flooded Recognition The Characteristics of Fault Belts Distribution in Pubei Oilfield Daqing, China The Distribution of Clay Minerals in the Middle 3rd Member of Shahejie Formation in Dongying Depression and its Main Controlling Factors The Double (or Multiple) BSRs Observations and their Tentative Interpretations The Provenance Tectonic Background Analysis of the Upper Jurassic Mohe Basin in Northeast China The Research of Gas-Water Relations in Low-Permeability Tight Sand Gas Reservoir - Taking Zizhou Gas Field for Example The Structural Analysis of Deep Gas Occurrence and Prevention of Gas Disaster in Fengfeng Coalfield Three Dimensional Fine Structure Modeling of Haqian1 Wellblock, in Northern Dzungaria Basin, China Zoning and Exploration Significance of the Maoping Pb-Zn Deposit, Northeastern Yunnan Province, China Characteristic Analysis of the Transition Zone in Carbon Dioxide Miscible Flooding Analysis of Soil Disturbance by Shield Tunneling Researches on Sequences Stratigraphy of Neogene in Huanghekou Sag, Bohai Bay Basin, China Chapter 2: Rock and Mining Engineering, Coal Mining The Effect of Sodium Dodecyl Sulphate (SDS) on Wettability of Different Coals Artificial Ground Freezing for Rehabilitation of Tunneling Shield in Subsea Environment Study of Rock Mass Rupture Law and Seismic Focus Positioning Process Revealed by Microseismic Monitoring Analysis of Influencing Factors on Effective Radius of Drilling Gas Drainage Study on Surface Movement and Deformation Characteristics and Pillar Stability of Large Strip Mining under Deep Mining Coal Seam Roadway Bolt Support Design Method Based on the Supporting Theory of Broken Rock Zone Connotation and Technology System of Green Mining of Manganese Resources Coupling Model of Evolution of Mining Fissure Elliptic Paraboloid Zone and Methane Delivery Effect of the Water Injection Pressure on the Permeability of Coal Body Experimental Study of Temperature Reduction with Airflow Control Measures in Mining Faces Investigate about Fan Performance Test of Air Shaft with Lift System Large Section Open-Off Cut Supporting Technology of Fully Mechanized Caving Mining for Carboniferous Extra-Thick Coal Seam Lication of Complex Summation in Eliminating the Impact of Minor Faults during the Research on Upper Mining Limit of Coal Seams Numerical Simulation for Shear Characteristics of Rock-Mass Structural Plane Numerical Simulation on Effect of Obstructing Airflow by Different Outlet Parameters of Mine Air Curtain Oxidation of Huolinguole Lignite with NaOCl Predict Gas Drainage Quantity of Mining with Dynamic Unbiased Grey Markov Model Prediction of Mining Step in Strong Mine Earthquake Based on Grey System Theory Present Situation of Coal Recovery Rate in our Country and Countermeasure Research Research of Bearing Mechanism of Double Support Structure of Deep Soft Rock Roadway Research on Sodium Removal from Zhundong Coal Research on the Equipment Addition of Antaibao Open-Pit Mine Research on the Simulation of the Roof Fracture about the Gob-Side Entry Retaining Risk Management of Induced Micro-Seismicity Caused by Hydraulic Fracturing through Acoustic Emission Statistical Analysis on Characteristics of Gas Emission in a Fully Mechanized Caving Face under Drainage Conditions Strata Behaviors of Fully-Mechanized Sublevel Caving Face Based on Similar Simulation Test Study on Fully-Mechanized Top Coal Caving Mining under Water Body with Shallow Overburden and Thin Bedrock Study on Methods of Exploring the Loosening Radius of Deep-Hole Controlling Blasting Study on Optimization Method of the Slope Angle Design for Open-Pit Mine Study on Pressure Relief Scope of Underlying Coal Rock with Upper Protective Layer Mining Study on Regulations of Coal Mining under Highway The Deformation and Failure Characteristics Research of the Roof Rocks in Anchorage Areas The Detection Research of Roadway Roof Strata Structure in Coal Seam Numerical Analysis on Mechanical and Deformation Characteristics of Pile-Anchor Retaining Structure for Waterway Excavation Research and Application of Ventilation Simulation and Monitoring System in Chensilou Coal Mine Study on Influencing Factor of Ground Deformation Induced by Shield Tunneling Study on Characteristics of Energy for Hard Roof Fracture in Island Workface Coupling Flow-Reaction-Transmission during Square Column Leaching Processes Evaluation of Stress-Controlled Permeability of Coal Fractures - A Laboratory Study A Study of Mining Administrative Agencies in the United States Analysis of the Dynamic Pressure Characteristics for Rock Fracturation under High Intensity Mining Application of Wasteless Mining in Hongtoushan Copper Mine Application of Fuzzy Mathematics in the Networks Optimization of Mine Ventilation System Bolt-Grouting Support in Soft Rock Chamber of Coal Mine Developing Strategies of Graphite Industry in Heilongjiang Province Effective Filling Rate in Filling Mining's Influence on Overlying Strata's Movement Experimental Research on Deformation Properties of Gangue-Paste Filling Material in Mine Experimental Study on Spectrum Characteristic of AE during Brittle Rock Fracture under Uniaxial Compression Based on Welch Geochemical Characteristics and Comprehensive Utilization of the Main Coal Seams in Wubu Mining Area, Northern Shaanxi Province In Situ Stress Measurement and Inversion in Deep Roadway Mechanical Property of the Deep Surrounding Hard Rock under Complex Environment Mining Project Design under Villages and Comparison Analysis of Mining Method Numerical Simulation Analysis on Deformation Mechanism of Shallow-Buried Soft Rock Roadway Numerical Simulation of Breaking Arch Evolution Rule of Coal Seams Mining Optimization Analysis of Pillar Position under Inclined Coal Seam Pillar Outburst Hazard Prediction Based on the Monitoring Data in Heading Face Research and Application of Phase Space Reconstruction Theory in the Prediction of Slope Failure Research and Practice of Rock Mechanics for Mining of Large and Thick Pillars with Inclusion of Fillings Research of Large-Area Hard Roof Caving Prevention and Control System in Shortwall Mining Face Research on Support Technology of Long Anchor in Fully-Mechanized Caving Thick Coal Broken Roadway Research on Technology Innovation of Coal Industry under Environmental Regulation Study on Characteristic and Mechanism of Deformation and Failure of Roadway Surrounding Rock in Deep Mining Study on Contraction of Dust Control System in Continuous Coal Mining Study on Energy and Stress of Irregular Failure Zone of Upper Layered in Slice Mining Study on Pipeline Self-Flowing Transportation of Cemented Tailing Fill Slurry Based on Fluent Software Study on Pressure Regularity of the Fully Mechanized Coal Mining Face and Evaluation on Support Adaptability Study on the Principal of Ground Pressure within the Top Irregularly Damaged Zone in Working Face Study on Top Slice Irregular Destroyed Areas of Spatial Exploration Location and Mining Method Test Study of Water-Resisting Ability of Coal Seam Floor Rock Mass The Affection of Ke of Coal Seam on Strata Behavior The Applied Research of Loose Blasting Technique in Managing Crushing Accident of Fully Mechanized Coal Mining Face The Beneficiaries under the Current Pricing System of Global Mines The Research on the Evaluation and Warning Model of Mining Industries' Security Chapter 2: Rock and Mining Engineering, Coal Mining The Theory and Practice of Forepoling Pre-Stressed System Bolt in Preventing the Rib Spalling Water Probe in Coal Mine Working Face Preparation and Application of the Integrative Hydraulic Drilling and Reaming Completely Technology Chapter 3: Mineral Process Engineering Study on Drainage Oil to Prepare Collectors of Coal Flotation Temperature Dependent Solid-Liquid Extraction Behavior of Rare Earths Using N-Butyl Pyridinium Hexafluorophosphate with Benzoyl Acetone Effect of Leaching Conditions on Dissolution Rate of Potassium from K-Feldspar Calcined Sample Research on the Thermal Decomposition Process of K-Feldspar-CaSO4-CaO System Application of Combined Collectors in Flotation of Lepidolite Development and Utilization of the Micro-Fine Weakly Magnetic Iron Ore Efficiently Utilizing a Low Grade and Complex Copper Ore by Flotation Experimental Study on Flotation of a Yunnan Sulfide a Low Grade Copper Ore Extraction of Copper from a Refractory Copper Oxide Ore by Catalytic Oxidation Acid Leaching Intensifying Magnetic Separation of Iron-Bearing Sulfide Minerals by Electron Beam Irradiation Pretreatment Mineral Processing Experiment Research of Low-Grade and Fine-Size Inseparable Lead-Zinc Ore Present Status of China's Hematite Processing Technology Study Recovery Copper from a Low Grade and Ultra-Fine-Grained Dissemination Mixed Copper Ore by Flotation Research of Coal Desulfurization on Microwave Research of the Complex Copper Slag Flotation Experiment Research Status of Gold Recovery from Thiosulfate Leaching Solution Study on Exploiting and Utilizing Technology of Certain Middle-and-Low-Grade Bauxite Study on Flotation Techniques of Tailings in Dachang Mining Study on Mineral Processing Technology of Unutilizable Lead-Zinc Mixed Ore Study on Recovering Carbon and Iron Concentrate from Flue Slime of Blast Furnace Study on the Optimal Condition of a Copper-Bearing Gold Ore Cyanide Leaching Using Orthogonal Design Tin in the Comprehensive Utilization of Mineral Processing Engineering and its Research Progress Research on Characteristics of Ore-Forming Fluids of Dahongshan Copper Ore Deposit A Non-Toxic Depressant for Galena in Differential Flotation of Cu-Pb Sulfides Containing Rare Earth Phosphate Rock Processing and Rare Earth Enrichment in those Processes Direct Reduction Experiment on Low-Grade Limonite at JiangXi Experimental Study on Concentrating Scandium by Leaching from Associated Scandium Ore Experimental Study on Extraction of Scandium from Complex Silicate Ore Experimental Study on the Cyanidation of a Low-Grade Gold with High Content of Arsenic in Myanmar Flotation Behavior of Smelting Abandoned Copper Slags Influence of Collectors on Flotation of Fine Tin Middlings after Gravity Separation Material Flow of the Mineral Resource Development Output Work of the Electro-Generative Simultaneous Leaching for Sphalerite-MnO2 in the Presence of Acidithiobacillus ferrooxidans Photoinitiation Synthesis and Properties of Anionic Polyacrylamide Research of the Low Grade Fluorite Flotation Orthogonal Test Research on the Flotation Process of Old Tailing in Burma Study of Manufacture Process and Properties of Tailings and Slag Based Mine Filling Cementitious Materials Study on Coal Separability for Wangcun Inclined Shaft in Chenghe Study on Collector for Reverse Flotation of Certain Phosphorite in Guizhou Study on Flotation Process of Coal Slime Study on Process Mineralogy and Titanium Separation of Ti-Bearing EAF Slag Study on the Bulk Flotation of a Low Grade Copper-Molybdenum Ore of Yunnan Province Study on the Recovery of Sulfur from Multi-Metals Tailings The Application Status of Triboelectric Separation and its Progress The Experiments for the Impact of Temperature on the Grinding Rate about Zhao Tong Bauxite Study on Dissolution Behavior of High Titanium Bauxite Chapter 4: Oil and Gas Well Development Projects A Fuzzy Method to Evaluate Remaining Oil Potentiality of PI Group A Grey Model for Predicting Water and Oil Production Rate Analysis of Production Characteristics and Prediction of Recovery of Lianhua Oil Layer in Qi 3-17-5 Block Application of New Hardware and Software Technology in the Oil and Gas Seismic Exploration and Development Cascade Utilization of Waste Heat in Heavy Oil Exploitation by SAGD Technology CBM Exploration Prospects Analysis in Northeastern Chian - In Jixi Basin as an Example Characteristics Curve of Multicontact for CO2 Flood Compressible Fluids Mitigation Effect Research in Deepwater Oil and Gas Well Control Factors of Chang 4+5 Reservoir Properties in Jiyuan Oilfield Controlling Factors of Hydrocarbon Accumulation in Talaha-Changjiaweizi Area EOS - In the Analysis of Force Balance Conditions for the Formation of Deep Basin Gas Estimation of CO2 Storage Capacity in Oil Reservoir after Waterflooding:Case Studies in Xinjiang Oilfield from West China Evaluation of Potential of Remaining Oil after Polymer Flooding Exploration Prospect of Low Rank Coalbed Methane Coal in Huhehu Depression Hailar Basin Investigation on Polymer Adsorption and Retention in a Polymer Flooded Reservoir Minimum Gas Influx Calculation in Gas Drilling after Water Production Based on Absorption Characteristics of Rock Oil Containment by Floating Boom under Wave-Current Coupling Condition I: Numerical Experimental Platform Optimization of Polymer Injection Program for Second-Class Oil-Bearing Layer Optimization of the Injection Rate of Well Group Water Injection Using BP Neural Network Method Optimization Technique in Double Stepped Thin Horizontal Well Petroleum Exploration Potential of Xisha Trough Basin in SCS Research of Retarded Acid Formula System of Qijiabei Oil Field Research on the CO2 Corrosion Inhibitor Technology in Oil and Gas Fields Research Status of Steam Assisted Gravity Drainage (SAGD) Technology Risks and Countermeasures of the Shale Gas Development in China Scheme to Tap Remaining Oil Potential in Poor Pay Zones Simulation of Hydraulical Fracture Height by Creating Artificial Barrier Study of Development of Medium-Deep Heavy Oil Reservoir Pilot Tests in Henan Oilfield Study on Influence of Injection Method on the Effect of Oil Displacement of Nanometer Microspheres Study on the Dynamic Control Chart of Pumping Wells Summary and Overview of Development Technologies of Unconventional Oil and Gas Reservoir The Current Situation and Prospects of Development of Low Permeability Oil Reservoir The Effect of Following Water after Polymer Flooding on the Displacement Efficiency with Alternately Injecting Slug of Gel and Polymer/Surfactant The Effect of Sand Production on Formation Porosity in Unconsolidated Oil Field The Effects of Qijia Oilfield Water Sensitivity to Formation Scaling of Injected Water The Exploration and Recognition of Stimulated Reservoir Volume for Shale Gas in Sichuan Basin - Taking Well W201 as an Example The Hydrodynamic Response and Frequency Domain Analysis of Deep Sea Truss Spar Platform The Prediction of Scaling Time in Producing Wells of ASP Flooding in the Fourth Plant of Daqing Oilfield The Seepage Pressure Distribution and the Capacity of Low-Permeability Reservoirs Gas A Combined Solution Model for Predicting Development Performance of Low Permeability Reservoirs A Design Model of Technological Parameter for Multi-Layer Reservoir Profile Control A New Method to Determine Mud Density in Deflecting Well A Simple Model for Two-Phase Flow in Liquid-Cut Gas Wells Application of the Imitation Horizontal well Technique in the Development of Low Permeability Reservoirs Applying Analytic Hierarchy Process to Determine Separate Layer Water Injection Rate of Single Well Applying BP Neural Network to Determine Proper Water Injection Intensity of Water Drive Oil Field Comparison of Gas Content Evaluation Methods in the Log Interpretation of Coalbed Methane Effects of Different Ions on the Corrosion Behavior of SM 80SS Tubing Steel in CO2/H2S Containing Aqueous Solution Evaluation Model of Profile Control Layers' Selection Based on Fuzzy Cluster Analysis Gas Cap and Oil Rim Collaborative Development Technique Policy of Carbonate Reservoir with Condensate Gas Cap Hydrocarbon Accumulation Conditions and Reservoir Characteriscs of Shahejie Formation in Tangzhuang Area Influence of Scaling in Alkaline/Surfactant/Polymer Flooding Surface Process Influencing Factor Study of CO2-Assisted Gravity Drainage in Extra-Low Permeability Reservoir Job Safety Analysis Model of Great Wall Drilling Company Mud Logging Operation Joule-Thomson Effect on Heat Transfer in CO2 Injection Wellbore Numerical Simulation of Stimulated Volume in Low-Permeability Reservoir Oil Containment by Floating Boom under Wave-Current Coupling Condition II: Containment Failure Regional Estimation of Block Oilfield Rock Physical Parameters Research on Coupled Flow in Deformation Medium Reservoir with Cave Research on Efficient Microbial Enhanced Oil Recovery Technology Based on Low-Temperature Heavy Oil Research on Residual Oil Distribution Regular of Steam Flooding after Polymer Flooding Research on Result Prediction of Coal-Bed Gas Wells Fracturing by Using Expert System Research on the Control Method of High Power APF for Oil Drilling Rig Research on the Controlling Factors and Grate Prediction of the Output of Pulverized Coal in Hancheng Block, Eastern Ordos Gas Field Study on CO2 Injection for Enhancing the Oil Recovery at Gao89 Block in Shengli Oilfield Study on Streamline Distribution of Horizontal Linear well Pattern in Anisotropic Reservoirs The Application of Non-Acid Plug Removal Technology in Sandstone Formation The Application of Seismic Sedimentology in Prediction of Channel Sand in Pu I Formation, Gaotaizi Oilfield The Research for Delaying the Bottom Water Coning in Horizontal Wells Application Balance Screen Pipe The Research on Improving the Efficiency of Injection-Production of the Lamadian Oilfield in Ultra-High Water Cut Stage The Research on Steering Fracture Numerical Simulation The Stress Calculation of Sidewall Rock in Hydraulic Fracturing Basing on Damage Theory The Study and Application of Massive Hydraulic Fracturing Technique in Y104-6 Well Glutenite Formation The Study of the Start and Stop Cycle of the Gathering and Transportation by Electrical Heating Chapter 5: Metallurgical Engineering Study on Amplitude of the Surface of Liquid Steel in Bottom-Blowing Ladle with Immersed Tube Balance of Raw Input and Energy of Titanium Slag Smelting in Closed High Power Direct Current Electric Arc Furnace Effect of Na2SO4 on the Decomposition Rate and Product Size in Seed Precipitation Process Effect of Na2SO4 on the Salt Discharge from Sodium Aluminate Liquor Effects of Ce or Nb Addition on Nucleation of Pearlite in High Carbon Steel The Influence of Electro-Deposition Time to the Distribution of Silicon in Ferrosilicon Alloy Characterization of Preparing Cold Bonded Carbon Bearing Pellets of Metallurgical Dust for Direct Reduction Particles Movement Simulation of Screw Transporting in Rotary Kiln Preparation of Alumina from Fly Ash by Sulfuric Acid Study on Nickel Nanopowders Prepared by Arc Plasma Chapter 6: Urban and Regional Planning Relationship between Irradiation Direction of the Light Source and Direction of Visual Axis A Critical Assessment of the Sustainability Performance of a Typical Mega City in China - A Case Study of Jinan A Framework for the Study of Urban Space Form Oriented Toward Low-Carbon Travel Development of an Evaluation Model for the Level of Rail Transit Service Development of an Evaluation Model of Freeway Traffic Safety Facilities System Discussion on the Characters and Problems of the Slow Traffic System for the Technological Development Zone Research on Economics and Traffic Survey City Area Research on Public Bicycle Rental Station Layout A Study to Setting Function of Queuing Discipline in Highway Tollgate Study on the Number of Berths of Road-Side Bus Stop A Portable Subway Logistics System for the Transportation of Small and Medium-Size Cargo Application of Catastrophe Theory in Traffic Flow of Highway Tunnel Group Efficiency Rating of Vision in Terms of Prevention of Road Accidents at Work Research on the Real Options in Investment Decision of Waterway Infrastructure Construction Study on Development Pattern of Public Transportation in Fuzhou City Study on the Application of CVM in the Social Benefits Valuation of Urban Mass Transit Study on Urban Emergency Event Forecast - Taking Urban Traffic Accident in China as Example The Research on Local Transport of Goods which by the Means of City Subway The Role and Development Prospects of the Ropeway in Urban Transport System Chapter 7: Development and Management of the Energy and Power Industry The Logistics Risk Assessment Studies of the Large Equipment of Hydropower Project Based on Three-Dimensional Structure The Decision-Making Optimization Model of 3E System Based on the Entropy A Review of Influential Factors and Evaluation Models of Energy Efficiency in China An Empirical Analysis of the Relationship between Economic Growth and Energy Utilization in China Comprehensive Use of Renewable Energy in Building Conflict of Coal and Electricity Price's Impact on National Economic Development Electricity Consumption Analysis Using Demographic Variables Case Study - Nakhonratchasima, Thailand Empirical Analysis on Total-Factor Energy Productivity Growth in China with DEA Method Industrial Structure Adjustment, Technology Innovation and Energy Efficiency Improvement - An Empirical Analysis Based on the Statistical Data of Hubei Province Multi-Objective Evaluation Method of Thermal Power Enterprise Cost Effective Research Research on the U.S. Coal Cupply-Demand Network Study on the Transition to Low-Carbon Electricity in Coal Industry in Shandong The Main Energy Problems and the Countermeasures of the Economic Development in China An Improved Historical Simulation Method to Estimate the Amount of Refined Oil Retail Value at Risk VaR Analysis for the Global Demand of Energy in the next 20 Years Analysis of Social Total Cost of Thermal Power and Nuclear Power Applying ARIMA and Fuzzy Logic to Predict the Electricity Spare Parts Demand Chapter 7: Development and Management of the Energy and Power Industry Dynamic Transmission Power Control Mechanism for Maximizing Energy Efficiency of WLAN Evolution of Carbon Emission of Fossil Fuel Final Consumption in China: Industrial - Spatial Perspective Renewable Power Generation Management: Case Study - Nakhonratchasima Province, Thailand Spatial Pattern Evolution of Coal Consumption at Provincial Level in China Study on the Evaluation Index System of Regional Energy Use Efficiency Study on the Evaluation of Electricity Market Operational Efficiency Based on Synergetic Theory Study on the Mechanism for Profit Distribution in Energy Supply Chain The R&D Trend of New Energy and Energy Development Strategy in Hebei Province Chapter 8: Global Climate Change and International Cooperation on Reducing and Control Carbon Emissions Greenhouse Gas Inventory for Energy Sector of Khon Kaen Province, Thailand A New Improved Decomposition Model Based on Laspeyres Index: A Case of CO2 Emission in China from 1996-2011 Allocation of China's Carbon Emission Right Based on Different Perspectives Analysis about CO2 Emissions Related to Household Consumption Analysis on Chongqing's Carbon Balance Based on Carbon Footprints CH4 Emissions Reduction Potential of Rice Paddy Ecosystem in South Jiangsu Province Comment on Credible Terrestrial Carbon Market Mechanism and Future Development Green Resources, Environmental Technology Innovation and the Green Firm-Specific Advantage of High-Carbon Enterprises Research on SO2 and CO2 Emission Characteristics and Emission Efficiency in China Research on the Barriers and Strategies of IPRs for LCT Transfer Research on the Establishment and Operational Mechanism of Forest Carbon-Sink Market in Coal Industry The Assessment and Reduction Approaches of the Carbon Emission in Jiangmen, China Renewable Energy and Carbon Footprint Emission at University Technology Malaysia (UTM) Assessment of the Trend of Albedo: A Case Study of Palermo A Study on the Effect of Climate Change Initiative in Reducing Greenhouse Gas in Home Heating Sector in South Korea The Development on Production Mechanism and Influence Factors of CH4 Exchanging Flux from Grassland Ecosystem The Influence of Grazing Intensity on Exchanging Fluxes of Nitrous Oxide, Methane and Carbon Dioxide from Grassland Evaluation of Post-Combustion CO2 Capture Technologies Calculation of Global Warming Potential and Environmental Cost Depending on Recycling Option of Destruction Waste Wood Analysis on Emission Reduction Targets of Carbon Dioxide in China Analyzing the Driving Effect of Influence Factors on CO2 Emissions Using the STIRPAT Model in Tianjin of China Calculation of Terrestrial Carbon Sink Capacity in Dongying City, Shandong Province CO2 Storage Capacity Assessment of Deep Saline Aquifer in Central Depression of Songliao Basin Driving Factors Analysis of Carbon Dioxide Emissions in China Based on STIRPAT Model International Experience and Enlightenment of Energy Saving and Emission Reduction in Logistics Industry On Establishment of Incentive Mechanism of Energy Conservation and Emission Reduction for Enterprises in Jilin Province Research on Energy Saving and Emission Reduction Countermeasures for China's Logistics Industry Research on Land Use Carbon Emissions Empirical in Guangdong Province State of the Art in Low Carbon Community Development Study on the Carbon Balance Trading under the Framework of Ecological Compensation Synergetic Abatement of Carbon Emissions and Air Pollution in China The Comparative Study of China's Low Carbon Pilot Provinces CO2 Emission Characteristics and Influence Factors The Impact on Carbon Emissions of Xinjiang's Population Structure Structure Decomposition Analysis of the Carbon Footprint Differences between Beijing and Tianjin Chapter 9: Ecological Economy, Circular Economy and Low-Carbon Economy Research on the Construction of Domestic Ecological Civilization Cities Construct Evaluation Index System of Low-Carbon Economy & Development Ability The Barriers and Countermeasures of Implementing Ecological Poverty Alleviation in Concentrated Poverty Areas The Construction of Evaluation Index System on China`s "Two-Oriented Society" and Empirical Study Building a System Dynamic Model of Regional Low-Carbon Development Development and Utilization of Mineral Resources Based on Circular Economy in Southern Jiangxi Errors and Solutions of Developing Circular Economy in Coal Enterprises Low Carbon Development Research on Coal Enterprise - Xinwen Group as an Example Low-Carbon Economy: Essential Route of Sustainable Development of Shaanxi Economy Promote Low-Carbon Economic Development by Implementing Low-Carbon Marketing Research on Reverse Logistics System of Energy-Intensive Industry Based on Circular Economy Researches on Problems and Countermeasures of Low-Carbon Economy in China Study of System Dynamics on the Equilibrium Development of Ecological and Economic System in Ordos of Inner Mongolia in China Study on Low Carbon Product Design from the Perspective of New Lifestyle Study on Low-Carbon Development to Transform and Improve Electric Power Industry in Shandong Province Research on the Relation between Corporate Social Responsibility Practice and Financial Performance under the Low Carbon Economy - From the Case Analysis of CNPC Algorithm and Simulation of Chinese Traditional Industrial Clusters Low Carbon Evolution Based on Evolutionary Games Theory on Complex Networks An Application of Ecological Compensation Mechanism Framework: A Case for Yulin County Dynamic Assessment of the Development of Circular Economy of Ningbo City, Zhejiang Province Research on Development Patterns of Low-Carbon Economy in China Study on Development Status and Countermeasures of Low-Carbon Tourism in Heilongjiang Province Study on the Path to Executing Eco-Engineering and Circular Economy in the Resource Enterprise Tangshan City Marketing Strategy Research Based on Low-Carbon Economy The Study on the Low-Carbon Transformation and Sustainable Development of the Resource-Based Cities Chapter 10: Engineering Materials and Processing Technologies FTIR Analysis of the Lignin Structure Changes of APMP Treated by Laccase and Laccase / Mediator System New Strength Agent: Corn Stalk Pulp Applied on Package Board Synthesis and Antioxidant Activity of Carboxymethyl Chitosan-Selenium The Evaluation of Lignin Structure Changes of both pH4 and pH2 from Hardwood Dissolved Soda-AQ Lignin by 31P-NMR Using Controlled Graft Copolymerization Technology to Prepare Structure-Controllable Cellulose Functional Materials Intercalation of Gelatin in Monohydrate Zirconium Hydrogen Phosphate Numerical Simulation of Thermal Sensitivity for Explosives Synthesis of Dimethyl Carbonate from Carbon Dioxide, Propylene Epoxide and Methanol The Effect of Thickness on the Properties of TGZO Thin Films for Optoelectronic Devices One Step Synthesis of -Caprolactam from Cyclohexanone and Hydroxylamine Catalyzed by SO3H-Functioned Ionic Liquids Study on the Elemental Analysis and Relative Molecular Weight of 5U Rock Asphalt Synthesis and Properties of Dispersive Type High Temperature Filtrate Reducer Used in Oil Well Cement Preliminary Study of Preparation and Properties of Activated K-Feldspar-Filled Hydrogel Materials Preparation and Characterization of KGM/PVA Composite Nanofibrous Membranes Fabrication and Photocatalytic Performance of SnO2 Prepared under Ultrasonic Vibration Characterization of Nickel-Antimony Doped Tin Oxide Electrodes Prepared via Sol-Gel Dip-Coating Method Copolymerization of Carbon Dioxide and Propylene Oxide Catalyzed by Salen Complexes Photocatalytic Decomposition of Methylene Blue with Lanthanum Doping TiO2 under Visible Light Irradiation Physicochemical Characterization of the Magnetic Fe3O4/MO-Intercalated-Layered Double Hydroxide Composite Preparation and Characterization of Poly(Vinylidene Fluoride) Hollow Fiber Membranes via Modified Thermally Induced Phase Separation Process Preparation and Characterization of Self-Healing Microcapsules Containing Two-Component Preparation and Characterization of the C2H5COOH-Graphite Intercalation Compound Preparation of PVB/ -CD/Silica Nanofibers Using Electrospinning Techniques Preparing and Applying of Flame Retardant Microcapsules Containing Magnesium Hydroxide Research Progress on Surface Coating of Magnesium and its Alloys as Biomedical Materials Synthesis and Catalysis of Fe3O4 Nanoparticles for Degradation of Rhodamine B Synthesis and Photocatalytic Activity of Ag-Doped BiVO4 Effect of Porous-Jump Model Parameters on Membrane Flux Prediction Inhibition of Corrosion and Scale Formation in Oilfield Produced Water Recycling System A Review on the Use of Chitosan and its Derivatives as Radical Scavenger and Metal Ions Chelating Agent Investigation into Acceleration Efficiency of Ultrasound in Dyeing Process Technique of Instantaneous Ultrasonic Extraction and Reverse Osmosis Concentration on Polyphenols of Chinese Herbs Research on the Influence of the Tension on Dielectric Strength of the Unidirectional Direction Glass Fiber Reinforced Composites A Preliminary Study of the Carbon-Based Solid Acid Preparation Process An Efficiently Brominated Flame Retardant Composed of Decabromodiphenyl Oxide and Antimonous Oxide for Long Glass Fiber Reinforced Polypropylene Application of Energy-Saving Magnesium Alloy in Automotive Industry Comprehensive Utilization of Resources of Titanium Dioxide at Home and Abroad Effect of CaCO3 Particle Size and Size Distribution on Rheological and Mechanical Properties of Polyethylene Effect of Oxygen Partial Pressure on Formation of Fe2O3 Nanostructure during Thermal Oxidation Effect of Pulsed Electric Fields on the Antibacterial Activity of Ovotransferrin and Mechanism of Action Effects of Dipping Pretreatment on the Flame Deposition of Carbon Nanostructure on the Low Carbon Steel Substrate Efficient Organe Organic Light-Emitting Devices Using N-arylbenzinmidzoles as Blocking Layer Enhanced Photocatalytic Performance of SnO2 Doped with Fe2O3 Hydrogen Peroxide Bleaching to Wine Corks with a Novel Catalyst Impact of Rheological Properties of Fiber Asphalt Mortar on Mixture Road Performance Laboratory Investigation of Pavement Performance of Warm Mix Asphalt with Different Addition Methods Loading of HgS Nanoparticles on the Silica Microspheres Mechanical Properties of a Novel Kind of Biomass Cellular Material Prepared from Forage Grass Numerical Study of Dynamic Crack of 1D Hexagonal and 3D Icosahedral Quasicrystals On the Calculation of Effective Anisotropy Constant of Nanoparticle One-Pot Synthesis and Visible Light Photocatalytic Activity of AgIn5S8/AgInS2 Composite Overview of the Development of Consolidation Theory of Unsaturated Soils Preparation of Nanosized Strontium Titanate Powder by a Nitrilotriacetate Precipitation Method Preparation of PST Ferroelectric Thin Films by Sol-Gel Process Research of Anti-Corrosion of Armour Steel in Surface Chromate Conversion Coating Research of Nano-TiO2 Composites on Malachite Green Decolorizing Effect Research on Virtual Manufacturing of Chain Rolling Cold Bend Section Steel Model Study on Corrosion Resistance and Mechanical Property of Welding HAZ Treated by Laser Surface Remelting Study on the Enhanced Visible Photocatalysis Activity in Transition Metal Doped ZnS Study on the Properties of Geocement Based Thermal Insulating Materials for High Temperature Technical Appliances The Influence of Fe3+ Doping on the Crystallization of TiO2 and their Photocatalytic Activity The Reduction Properties of Hexa Aluminates Substituted by Different Metal Ions for Denitrification System Wear Behavior of Mg Alloy Procduced by Equal Channel Angular Extrusion Structure Studies on Order Assemblage of Nickel II Complexes The Analysis of the Film Morphology Silver Co-Doping Effect on the Antimony Doped Tin Dioxide Electrode An Experiment Study of the Effect for the Fuel Additive Using in Fishing Vessels Light Diesel Engine Performance Influence of Ti-Doping on the Thermoelectric Properties of ZnO:Al Thin Films Research on Preparation of New Aluminum Silicate Fiber Adiabatic Paper Study on Electrochemical Flotation of Low Rank Coal Macerals Study on Electronic and Optical Properties of Al-Doped ZnS from Density Function Theory Study on Supercapacity Properties of Manganese Dioxide Active Material by the Cation Concentration Change on the Electrode Surface Synthesis and Thermal Conductivity of ZnO Nanofluids Thermochromic Properties of VO2 Films Deposited on Quartz Glass Gold Nanoparticle Resonance Rayleigh Scattering Spectral Determination of Trace Au (III) Preliminary Study on the Electrolysis of Titanium Oxysalt Electrification Theory and Experimental Research of Aluminum-Based Metallic Material Sediment from the Yellow River Salvaging as Glass-Ceramics One Method for Estimating Normal Contact Stiffness with Raand Adhesion Rate 3D Modeling Based on Multiscale FE Analysis of Irregular Porous Materials A New and Sensitive Hydride Generation-Nanosilver Resonance Rayleigh Scattering Spectral Method for Trace Se (IV) A Performance Study of Self-Piercing Riveting of Aluminum and Copper Alloy Sheets Analyzing on the Reasonable Composition of High-Chromium Alloy Cast Iron to Make the Mud Pump Shell of Dredger Carbon Fiber Application Analysis in the Apparel Field Characterization and Performance of SO42- / SnO2 / MCM-41 for -pinene Isomerization CIGS Thin Film: Synthesis and Characterization Comparison Friction and Wear Properties of Overbased Calcium Sulfonate Complex Grease and Polyurea Grease Influence of Technological Parameters on Sheet Metal Punching Section Quality Post-Annealing Effects on the Surface Roughness of Undoped and Al-Doped ZnO Thin Films Deposited by Atomic Layer Deposition Preparation of High Purity Alumina Technology Overview Rheological and Thermal Properties of Blends of Recycled LDPE and Virgin LDPE Spontaneous Formation of DTAB/SDBS Vesicles Study on the Performance of Cool Storage Material for Vaccine Transportation Study Pressure-Cyanide Dissolution Different of Metal Palladium and Platinum Powder Superhydrophobic Film Make up of Corrosion Aluminum Plates and Polypropylene Coated Synthesis and Electrochemical Performance of Spinel LiMn2O4 Modified by CNTs Synthesis of Anatase/Brookite Mixtured TiO2 Nanoparticles by a Chimie Douce Technique Synthesis of Di(Chloroethyl) Phosphite Synthesis of High-Quality MCM-41 Using Silica Fume as Silica Source Synthesis of LiFePO4/C Composite Cathode Materials by Solid State Method Using Mixed Iron Sources The Characterization of CIGS Thin Films Prepared by Ion Beam Sputtering Deposition from a Quaternary Target The Laboratory Evaluation of Several Polymer Solution Performances The Synthesis and Crystal Structure of a New 1-D Co (II) Complex Based on Boronic Acid Ligand Chapter 10: Engineering Materials and Processing Technologies Thermoelectric Characterization of Direct Current Magnetron Co-Sputtering Zinc Antimonide Thin Films Transformation Behaviors of U(VI) on Irons Hydroxide Colloids VO2 Thin Films Deposited on ZnOBuffer Layer Working Pressure Dependence of Structure and Optical Performance of Zinc Oxide Thin Films by Magnetron Sputtering Prepared for Potassium Sulfate of the Orthogonal Test in K-Feldspar-Phosphogypsum-Coke System Chapter 11: Equipment Design, Manufacturing, Automation and Control Modeling and Application of Coal Pulverizing System for Coal-Fired Power Plant The Improvement of the Circuit of Low Power in Yellow River Diversion Project Experimental Studies on Transmission Characterization of Stratified Earth Channel in Through-the-Earth Communications with Elastic Wave Testing Apparatus Design of High-Concentration Slurry Transport in Environment-Friendly Dredging A Telemetry and Telecontrol Universal Simulator Automation Control Method of Time-Varying in Heat Conduction Coefficient and Pure Steam Output Interference The Extraction and Identification of Target Infrared Image Signature Based on Instantaneous Polarization UM2000 Spectrum Estimation Using Multiple Signal Classification Method Research Status of Broken Belt Protector in Belt Conveyor Algorithm Study of the Models Merge Based on Delaunay Triangulation Analysis of Variable Section Piezoelectric Harvester Automated Design of Mechanical System for Generating Alternate Mechanism Concepts Multiparametric Monitoring of Rotating Parts of Mechanical Devices New Construction Machinery Developed in Ultra-Deep High Pressure Jet Grouting Pile Optimization Design of the Odometer Gear Pair Permafrost Hazard of MoHe-DaQing Crude Oil Pipeline Research and Development of Gravitation Electro-Galvanizing Testing Apparatus Research of Mine Ventilation Parameters Tester Based on ZigBee Technology Research on the 6DOF Robot Simulation and Modeling Study and Development on Safety Operation of Marine Pump Study on Assembly Design Approach Based on Synchronous Modeling Technology The Analysis on Influence of Test Error of Voltage Transformer Primary Test Circuit Causes on GIS and the Improvement of Test Method The Designment of Double-Roll Cake Breaker The Fuel Consumption of the Integrated Piston-Plunger Pump The Programming Model about Petroleum Pipeline An Automatic Light Communication System for Vessel Fault Diagnosis System of Large Wind-Driven Generator Based on Virtual Instrument Kinematics Analysis of the Eccentric Swing Paper Transfer Mechanism Study on the Shift Schedule Based on Driver Type of Automatic Mechanical Transmission Automotive Interior Parts Molding Process Simulation and Parameter Optimization PHD Filter for Multi-Radar Multi-Target Tracking A Review on the Development of High Pressure Roller Mill Transform Three Mechanical Stepless Simulation Darkening Welding Helmet Design Civil Unmanned Aircraft System Maintenance Structure Design and Research of Environmentally Compound Deicing Techniques Engine Hood Lightweight Optimization Design Based on Overall Satisfaction Evaluation on Parallel Assembly Sequence Key Component Design of Environment-Friendly Jujube Takes Core Machine Proposing a Revised Definition of Perpetual Motion Machine Research on Green Manufacturing-Oriented Packaging Design Technology Research on Micro-Heater Based on Pt-100 Study of Computer Aided Process Planning Base on B/S Structure Study on Bolt (Cable) Supporting Design Method Based on Tunnel Fall Hidden Dangers Classification Study on Redundant Constraint in Mechanism Design Study on Structure Optimization of Multi-Wavelength Brillouin-Erbium Doped Fiber Laser The Galloping Parameters Study of Ice-Coating Transmission Line The Progress of Finite Element Analysis on Internal Combustion Engine Cylinder Head Assembly Deployment of Wireless Sensor Network for Gas Leak Monitoring Design of Outdoor Vehicles Computer Dispatch System Based on GPS Moving Vehicle Detection of Airborne Video on SURF Research on Direct Wave Separation of PD Ultrasonic Signal Based on ICA The Design on Temperature Monitoring System for Traditional Fermentation Process Based on WiFi Chapter 12: Information Technologies, Computer and Data Analysis Applications in Industry and Engineering Aluminum Reduction Cell's Fault Monitoring Based on LS-SVM Based on the AVR Micro Controller's Serial Communication Protocol Implementation An Application of Rectilinear Embedding in VLSI Placement Substation Inspection System Based on RFID Technology Numerical Study of Koyna Dam Failure Process Using Extended Finite Element Method A Algorithm of Three-Dimensional Human Face Pose Correction Based on the Normal Vector Alignment A Design and Development of Chongqing Emergency Warning Information Releasing Software A MapReduce Telecommunication Data Center Analysis Model A Matching Theorem in GFC-Spaces with Application to Saddle Points A New Automatic Modulation Classifier Using Swarm Intelligence-Trained Neural Network A New Particle Swarm Algorithm for Solving Constrained Optimization Problems A New Type of Deaf-Mute Sign Language Recognition System Based on the Mobile Communciation Platform and Terminal Equipment A Novel Approach on Automatic Building of Word Correlation Net Based on Statistic A Preprocessing Algorithm of Corn Infrared Spectrum Based on MSC and DOSC A Review of TFT-LCD Panel Defect Detection Methods A Routing Protocol for Solar Energy Harvesting Wireless Sensor Networks An AFC System of Digital Scenic Areas Based on Decision Tree Classification An Image Segmentation Method Based on Adaptability Threshold Analysis on the Target Distribution Equivalent of the Anti-Ship Missile Application of BP Neural Network in Coalmine Safety Management Performance Evaluation Application of Improved LMD in Gear Fault Diagnosis Approximate Processing Method of Random One Direction Singular Rough Sets Approximation of Missing Values for Classification and Regression Data Acquisition System Connect to CMG-3T Low-Frequency Seismic Pendulum Detection of External Defects in Steel Wire Rope Based on Image Processing EMLDC: An Efficient Method of Long Data Communication for the L4 Microkernel-Based Virtual Machines Graph Traversal Dynamic Demonstration System Design and Implementation Ground Target Tracking Using Aerial Images Improved Fingerprint Recognition Algorithm Application Study on Smart Home Labelling Properties of Special Models Related with Networks Multi-Classification Combination Algorithm Based on Logit Model and Support Vector Machine Research on Foreign Body Detection for Granular Material Based on Feature Weighted OCSVM of Color Recognition Research on Jiangxi Tourism E-Commerce Platform Construction Research on Session Replication Schemes Research on SVM Cell Concentration Prediction of Erythromycin Fermentation Process Based on Ant Colony Optimization Serial Communication Based on LabVIEW for the Development of an ECG Monitor Solutions for a Class of Elliptic Equation Study of Scale-Down Method for Dense Grid Points Study of Sensor of Electrical Capacitance Tomography (ECT) System Based on COMSOL Teleportation of an Unknown Three-Particle Entangled State via a Cluster State The Implementation of Visualization Software of the Rapid 3D Apparent Physical Properties Inversion Method Three Jiaohe Coal Mine Safety Information Management System Design Scheme Venture to Achieve Automated Mapping with ArcGIS-Based MESIS An Enhanced Cross-Layer MAC Design for Energy Efficiency in Wireless Sensor Networks A Comparative Analysis of Shipping Emissions Estimation Methodologies and their Applicability A Fault-Tolerant Data Center Network Structure A Gesture Recognition Algorithm Based on PCA and BP Neural Network A New Piecewise Rational Reparameterization Method A Novel Algorithm for Classifying Measuring Curves Based on Interval Estimation A Procedure to Evaluate the Indoor Global Quality by a Sub Objective-Objective Procedure A Target Selection Algorithm of Seeker Based on the Prior Information and SVM Algorithm for Imaging Sonar Target Detection based on Geometry Characteristic and SVM An Anhydrous Bridge Recognition Algorithm in Aerial Image An Automatic Cloud Service Platform for Learning from Large-Scale Data Application of the Technology of Multi-Source Information Fusion in Industrial Monitoring and Fault Diagnosis Application Research of Improved Ant Colony Algorithm in Hybrid Mobile Agent Routing Approximating Nash Equilibrium Using Genetic Algorithm Boundary Variable Precision Dominance-Based Rough Set Approach in Multicriteria Sorting Problems Clustering Routing Protocol Based on Base Station Authentication with TLEACH in WSN Design and Implementation of Operation Limited Linear List Visualization Demo System Development of Digital Vehicle Information Terminal Hardware System Fuzzy AHP-Based Algorithm for Performance Evaluation of New Socialist Countryside in Northwest Minority Regions of China Hybrid File System - A Strategy for the Optimization of File System Mathematical Constraints Representation for Bottom-Up Approaches to Climate Policy Modeling Mathematical Models for 3D Reconstruction Using Surface Triangulation Monte Carlo Simulation on Conformation Properties of Polymer Multiple Chain System Nonlinear Analysis of Drivers Heart Rate Variability on the Prairie Highway Pheromone-Based Ant Colony Algorithm for Optimal Proliferation of Research Preliminary Study on Digital Signature Technology and Application Realization of the Multi-Factor Combined Information Value Model in the Spatial Prediction of Landslides Research on Security Strategies of Digital Library Based on Cloud Computing Platform Research on the Mapping Rules of Complex Inheritance Relationship from CIM to the Logic Model Research on Various Algorithms in Asynchronous Network Communication System Robust Kalman Filtering for Descriptor Systems with Unstructured Uncertainties Smart Detection Technology of Serial Arc-Fault on Low Voltage Power Lines Structure and Analysis of Certificateless Proxy Blind Signature Scheme without Bilinear Pairing Studies on Key Problems of Wavelet Transform of Face Recognition Studies on the Secure Routing Protocols of Mobile AD Hoc Networks Study on Distributed Architecture, Information Integration and Access Control of Manufacturing Execution System Study on Location Based Services Driven Mobile E-Commerce System The Design of the Logistics Information Sharing Platform Based on Cloud Computing The Properties of Analogous to Dedekind Sums The Research and Implementation of an Electronic Seal System Based on CAPICOM The Research of Covariance Matrix by the Nature of Bilinear Function RETRACTED: The Realization of Communication between AB SLC500 and Profibus-DP Network A Composite Pulse Modulated Signal Compression and DSP Implementation Performance Analysis of Radar Pulse Compression Signals Vehicle License Plate Location Based on High Frequency Vertical Edge and Mathematical Morphology Chapter 13: Engingeering Management, Logistics and Education Research on Diffusion of Warning Based on Multi-Agent Modeling Research on Integrated Fire Danger Index Application Based on Ignition and Fire Research on Risk Management in Urban Subway Construction Assessment of the Influence of Binhai Lng Project on Regional Economic Development in Jiangsu Province Study on the Forecast of the Economic Loss in Storm Surge Disaster Based on Fourier Series - A Case Study of China Research on Scientific and Technological Innovations Promoting on the New Round Economic Structure Adjustment of Liaoning Study on the Tourism Value Evaluation of the Urban Industrial Heritage on the Basis of Matter-Element Model SWOT Analysis and Countermeasures Research on the Development of Turpan Sand-Therapy Tourism Resources An Estimation Method of Time-Varying Beta in Price Limiting Mechanism Brief Discussion of Comtemporary College Student's Network Security Education Issues Education of Low Carbon and Cultivation of Social Responsibility Research on Seaport Cluster Strategy of Qingdao Ports Based on SWOT Analysis The Method Research of Production Enterprise Logistics System Integration A Brief Analysis of Global Rare Earth Trade Structure Compound Option Pricing Model Applied in Overseas Mineral Investment The Study of the Relationship between Natural Resource Abundance and Economic Growth The Evolution of the Investment Environment Field: A Content Analysis of 12 Years of Investment Environment Research Papers Developing of Organisational Culture as a Presumption of Industrial Enterprise Performance Optimization Engineering Management on Modeling of Environmental Protection Research on Cultivation Model for Logistics Talents of Universities in Ningbo: A Case Study of Zhejiang Wangli University Study on Evaluation Method of Corporate Social Responsibility Based on Fuzzy Consistent Matrix Study on Measurement Method for Flexible Management Effect of Project Schedule under Construction Supply Chain Mode The Governmental Supervision Responsibility and Standardization Construction of Construction Quality The Impact of Technological Regimes on the Establishment of Technological Standards Undergraduates' Innovation Ability Training Based on Scientific Research Base

by "Nielsen BookData"

• NCID: BB14251010
• ISBN:
  • 9783037857441
• Country Code: sz
• Title Language Code: eng
• Text Language Code: eng
• Place of Publication: Durnten-Zurich
• Pages/Volumes: 4 v. (3423 p.)
• Size: 25 cm
• Parent Bibliography ID:
  • BA24926058