Multi-functional materials and structures IV : selected, peer reviewed papers from the 4th International Conference on Multi-Functional Materials and Structures (MFMS 2013), July 14-17, 2013, Sathorn-Taksin, Bangkok, Thailand

著者

• International Conference on Multi-Functional Materials and Structures
• Sombatsompop, Narongrit
• Bhattacharyya, Debes
• Cheung, Karen Hoi-Yan

書誌事項

Multi-functional materials and structures IV : selected, peer reviewed papers from the 4th International Conference on Multi-Functional Materials and Structures (MFMS 2013), July 14-17, 2013, Sathorn-Taksin, Bangkok, Thailand

edited by Narongrit Sombatsompop, Debes Bhattacharyya and Karen Hoi-Yan Cheung

（Advanced materials research, v. 747）

Trans Tech Publications, c2013

• : pbk

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). The main focuses collection of 184 peer reviewed papers was to cover all aspects of materials, including advanced and functional materials, composites and applications, green and biomaterials, smart and intelligent materials and structures, processing and engineering of materials, natural and synthetic fiber composites and materials for specific applications. The papers are grouped as follows: I. Advanced Composites and their Applications; II. Bio-materials and Biomimetic Materials; III. Intelligent Processing of Materials and Structures; IV. Nano-Materials, -Sensors and -Actuators; V. Engineering and Structural Materials; VI. Smart Materials and Structures; VII. Tribology (Surface Engineering); VIII. Materials for Fuel Cells and Solar Cells; IX. Natural Fiber Composites; X. Synthetic Fiber Composites; XI. Construction and Building Materials; XII. Soft Materials; XIII. Functional Materials; XIV. Materials Processing, Modeling and Technology; XV. Green Materials; XVI. Others.

目次

Preface, Committees and Sponsors Invited Paper The Coexistence and Competition of Natural Fibres with Man-Made Fibres and Future Prospects Multi-Functional Properties of Wool Fibre Composites I. Advanced Composites and their Applications Effect of Organoclay Dispersion on the Barrier Performance and Mechanical Strength of EVA Clay Nanocomposites Advanced Composites with Multi-Functionality Enhanced by Nanoparticles Influence of Organomodified Ni-Al Layered Double Hydroxide (LDH) Content on the Thermal Properties and Degradation Kinetics of Polystyrene (PS)/Ni-Al LDH Nanocomposites Prepared via Solvent Blending Method Effects of Intermediate Layers on Chemical Ordering and Hard Magnetic Properties of L10 FePt Films Fabrication and Characterization of Shellac/2-Isopropyl-5-Methylphenol Composite Film Patch: Physical and Antimicrobial Properties Electroactive Epoxy-Titania Hybrid Anti-Corrosive Coatings Prepared by Small Basic Molecule-Catalyzed Sol-Gel Route Mechanical and Morphological Properties of Silicon Carbide Filled Polypropylene Composites with PP-g-MA as Compatibilizer Investigation of Flame Retardant Properties of Poly(ethylene Terephthalate)/Silatrane Complex/Montmorillonite Nanocomposites Mechanical and Fractographic Studies of Surface-Treated Fly Ash Reinforced Polyester Composites CFRP Strengthening of Reinforced Concrete Frames with Masonry Infill Walls: A Numerical and Parametric Study Sintered Frictional Materials Based on Cu Powders Dispersion Enhancement of Multi-Walled Carbon Nanotube (MWCNT) in Nitrile Rubber (NBR) Nanoclay Gel for Poly(lactic Acid)/Clay Nanocomposite Toughness and Compatibility Improvement of Thermoplastic Starch/Poly(lactic Acid) Blends Mechanical, Thermal and Morphological Properties of Poly(butylene Succinate) Filled with Bio-Functional Filler from Eggshell Waste Effect of Reinforcement on Flexural Properties of Brittle Composites II. Bio-Materials and Biomimetic Materials Synthesis of Nanocrystalline Hydroxyapatite by Natural Biopolymers Based Sol-Gel Technique Properties of Deproteinized Natural Rubber Latex Blended Films with Glycol Penetration Enhancers for Pharmaceutical Applications Propranolol Hydrochloride Extended-Release Matrix Tablets Using Natural Rubber Latex as Binder Preparation of Peel-off Mask from Deproteinized Natural Rubber Latex Effects of Drying Temperature on the Properties of Deproteinized Natural Rubber Latex/Starch Composite Films Characterization of Lidocaine Transdermal Patches from Natural Rubber Latex Activity of Ciprofloxacin and Tobramycin-Loaded Natural Peptide Dressing on Biofilms and Planktonic Cells Biodegradation and Anti-Bacterial Properties of PLA and Wood/PLA Composites Incorporated with Zeomic Anti-Bacterial Agent Effect of Biopolymer on the Dissolution and Stability of Itraconazole Immobilization of Naringin onto Chitosan Substrates by Using Ozone Activation Preparation of Porous Hydroxyapatite as Synthetic Scaffold Using Powder Deposition and Sintering and Cytotoxicity Evaluation Effect of pH on Stability of Oil-in-Water Emulsions Stabilized by Pectin-Zein Complexes Ultrasound Effect on Swelling Properties and Drug Release Behaviors of Spray-Dried Tapioca Starch Tablets Fabrication of Shellac-Based Effervescent Floating Matrix Tablet as a Novel Carrier for Controlling of Drug Release Behaviour of Lipid-Based Formulations Containing Nifedipine in Aqueous Media as Observed by Small Angle X-Ray Scattering Preparation of Solid Self-Emulsifying Drug Delivery System of Manidipine Hydrochloride PEG-Glu-PEI-Dexamethasone Conjugates: Synthesis, Characterization and In Vitro Gene Transfer Properties The Influence of Amount of Succinic Anhydride in Chain Extension Reaction on Increasing Molecular Weight of Poly(lactic acid) The Recovery Effect of the Translationally Controlled Tumor Protein in 2-Hydroxy-Ethyl Methacrylate-Treated Human Dental Pulp Cells Influence of Bagasse Carboxymethyl Cellulose Addition on the Thermal and Mechanical Properties of PLA Composites Dissolution Improvement of Itraconazole by a Nanoparticulate System Containing Lecithin-Pectin Complexes Fabrication and Antifungal Activity of Cellulose Acetate-Based Fibers Encapsulating Natural Neem Seed Oil Preparation of 3DP Hydroxyapatite/Polycaprolactone Composite by a Novel Sequential Infiltration Technique Evaluation of PEG-PPG-PEG Copolymer Blends for Using as Resorbable Bone Wax Effects of Surface Treatments of Polycaprolactone Scaffolds on their Properties Preparation and Characterization of Plasma-Treated Porous Poly(glycerol sebacate) Scaffolds Controlled Release of Atractylodes lancea Extract from Rice Starch-Konjac Glucomannan Film Fabrication and Characterization of Porous Biphasic Calcium Phosphate Scaffolds by Doping TiO2 Effect of Glass Compositions on Crystallization and Mechanical Properties of Lithium Disilicate Glass Ceramics for Dental Crown III. Intelligent Processing of Materials and Structures Crystallization Behaviour of Polytetrafluoroethylene over very Large Cooling Rate Domains Piezoelectric Harvesting Characteristics of BaTiO3 Microstructures for Optimal Nanogenerators Oxygen Cold Plasma Treatment to Improve Hydrophilicity of HDPE Pellets IV. Nano-Materials, -Sensors and -Actuators Characterizations of Mesa Structural Near-Infrared n-Type Nanocrystalline-FeSi2/p-Type Si Heterojunction Photodiodes at Low Temperatures Removal of Humic Acids in Water by Carbon Nanotubes Reversible Self-Assembling of Comb-Like Functionalized Dextran Surfactant Polymers as an SPR-Sensing Surfaces Partially Dynamically Vulcanized Thermoplastic Elastomer Based on Natural Rubber-Polypropylene-Clay Nanocomposites Synthesis and Characterization of SPEEK/Layered Double Hydroxide Polymer Nanocomposite for Fuel Cell Applications Tin-Powder Mediated Facile Route for the Reduction of Graphene Oxide A Facile One-Step Hydrothermal Synthesis of Graphene/CeO2 Nanocomposite and its Catalytic Properties Electrochemically Preparation of Functionalized Graphene Using Sodium Dodecyl Benzene Sulfonate (SDBS) V. Engineering and Structural Materials Studies on Thermal and Mechanical Properties of Polybenzoxazine Modified with Succinic Acid Nonlocal Elasticity Theory for Free Vibration of Single-Walled Carbon Nanotubes Finite Element Simulation for Creep Response of Strengthened Wood/PVC Composite Strengthening of Gravity Load Designed Reinforced Concrete Frames with the External RC Shear Walls Stochastic First-Ply Failure Analysis of Laminated Composite Plates under in Plane Tensile Loading Influence of Clay Tile Brick Infill Walls on Seismic Response of Buildings Confinement Effectiveness of CFRP in Axial Members under Various Loading Conditions Surface Roughness Model when Machining Aluminum Nitride Ceramic with Two Flute Square End Micro Grain Solid Carbide End Mill VI. Smart Materials and Structures Functionalization of Amorphous Chalcogenide and Titanium Oxide Layers by Gold Nanoparticles High CO2 Adsorption Polymeric Foam from Poly(DVB)PolyHIPE Filled with Maleimide-Terminated Poly(Arylene Ether Sulfone) Oligomers via High Internal Phase Emulsion VII. Tribology (Surface Engineering) Mechanical and Wear Properties of Acrylonitrile Butadiene Styrene Polymer Composites Scratch Resistance and Adhesion Properties of PEEK Coating Filled with h-BN Nanoparticles Comparative Studies on Wear Behaviour of Sintered 316L Stainless Steels Loaded with h-BN and MoS2 VIII. Materials for Fuel Cells and Solar Cells Feasibility for Enhancing Power Conversion Efficiency of P3HT/C60 Polymer Solar Cell by Adding Donor-Acceptor Block Copolymer as a Compatibilizer Morphology and Conductivity of Electrospun Dehydrochlorinated PVC Nanofibers Nafion-Silane Modified Mordenite Composite Membrane Synthesis and Characterization for Direct Ethanol Fuel Cell Gel Polymer Electrolyte from Poly(Acrylamide) Coated on Natural Rubber Latex by Topology-Controlled Emulsion Polymerization for Dye Sensitized Solar Cells Application Effect of Annealing Temperature on the Optical Parameters of CdS Thin Films Prepared by Thermal Evaporation Method Structural and Thermoelectric Properties of Zn-Doped Cuprous Aluminate Delafossite Effect of Photocatalytic Coating on Concentrator Photovoltaic Module IX. Natural Fiber Composites Inhibition of Fungal Growth and Material Characteristics of PVC and Wood/PVC Composites Doped with Fungicides Use of Natural and Synthetic Fibers as Co-Reinforcing Agents on Abrasive Wear Behavior and Flexural Strength of Wood/PVC Composites Effect of Flame Retardants on Performance of PALF/ABS Composites Mechanical Properties of Acrylate-Styrene-Acrylonitrile/Bagasse Composites Microfibrillated Cellulose Reinforced Poly(vinyl alcohol) Composites Isolation of Nanocellulose from Pomelo Fruit Fibers by Chemical Treatments Biocomposites from Cassava Pulp/Polylactic Acid/Poly(butylene Succinate) The Study of Using Bio-Filler from Cassava Pulp in Natural Rubber Composites Cogon Grass Fiber-Epoxidized Natural Rubber Composites Physical and Mechanical Properties of Wood-Plastics Composites: Effect of Types and Contents of Wood Flour Density Reduction and Electrical Conductivity Induction in Wood Plastic Composites Cellulose Nanofiber Reinforced Ecofriendly Green PMMA Nanocomposites Composite Panels from Underutilized Wood and Agricultural Fiber Resources Analysis of the Mechanical Properties of Rice Husk Reinforced Polyethylene Composites Using Experiments with Mixtures Comparative Studies on the Mechanical and Thermo-Mechanical Performance of Flax Fiber Reinforced Polyester and Polyester-Biopolymer Blend Resins X. Synthetic Fiber Composites Fabrication and Characterization of Poly(vinyl Alcohol)/Functionalized Graphene Oxide Nanofibers Produced by Electrospinning Method Studies on Mechanical Properties of Kevlar Fiber Reinforced Iron (III) Oxide Nanoparticles Filled Up/Epoxy Nanocomposites XI. Construction and Building Materials Shaped Textile Reinforcement Elements for Concrete Components The Effect of Rice Husk Ash on Properties of Aerated Concrete Estimation of Tensile Capacity of Single Anchors Including Edge Effect Using Neural Networks An Experimental Study on Reinforced Concrete Infilled Frames with Openings Strengthening of Reinforced Concrete Frames Not Designed According to TDY2007 with External Shear Walls The Structural Damages and Collapse Types in Turkey, Observed after the Recent Earthquake Evaluation of a Gravity Load Designed Reinforced Concrete Structure Failed under its Own Weight due to Creep in Concrete The Influence of Aluminium Dross on Cement Paste's Porosity XII. Soft Materials Antibacterial Efficacy and Mechanical Properties of Silica Reinforced Natural Rubber (NR) with HPQM Based Neusilin Antibacterial Ability of HPQM Base Neusilin/Natural Rubber Reinforced with Carbon Black Ozonolysis by High Voltage Power Supply to the Melt-Extrudates of Admicelled Rubber and Natural Rubber Cure Characteristics, Morphology and Mechanical Properties of Partially Cured NBR Blended with NR Effect of Mixing Conditions on Phase Morphology of NR/EPDM Blends Influence of Aromatic Content in Rubber Processing Oils on Viscoelastic Behaviour and Mechanical Properties of Styrene-Butadiene-Rubber (SBR) for Tyre Tread Applications XIII. Functional Materials New Polyimide Based Composite Films for Fuel Cells: Study of the Porous Structure Anti-Algal Performances for Biocide-Enhanced Low-Density Polyethylene Film Determining the Co-Efficient of End Constraint of Stretch Formed Microtruss Materials Electrochemical Reactivity on Conducting Polymer Alloys Preparation and Properties of Diol Functionalized Epoxidized Natural Rubber Study on Nonlinear Optical Properties of BSS Material Anti-Bacterial Efficacies and Discolorations of Polypropylene Doped with HPQM Based Water Solution and Neusilin Synthesis and Characterization of Supramolecular Elastomers from Polyacids Composed of Vegetable Oils Functional Modification of Bamboo Rayon (Cellulose) Fabric to Render it Antibacterial and UV Protective Synthesis of High Quality Graphene Films by Atmospheric Pressure CVD and their Application in Laser Q-Switching Photocatalytic Recovery of Noble Metals from Waste Solutions Using a Polyoxometallate (POM)-Based Hybrid Photocatalyst Silica-Reinforced Natural Rubber with Epoxidized Low Molecular Weight Rubber as a Compatibilizer Investigation of ZnO Buffer for the Optical and Electrical Characteristics of Polymer/Carbon Nanotube Composite Sol Deposited on Flexible Substrates Comparison of Coupling Effectiveness among Amino-, Chloro-, and Mercapto Silanes in Chloroprene Rubber Intermetallic Electrode Structure Produced by Thermal Spraying of Water-Atomized Cu-Sn Powders Influence of Natural Rubber/Poly (3-Trimethoxysilyl Propyl Methacrylate) Core-Shell Compatibilizer on Dynamic, Mechanical and Morphological Properties of PMMA/ENR Blends Superhydrophobic Silicon Surface with Micro/Nanocomposite Structure Formed by 2-Step Wet Etching Effect of Heat Treatment on High Purity Nanoporous Silica Formed from Volcanic Ash Deposit Shirasu Stochastic Nonlinear Free Vibration Analysis of Functionally Graded Beam Subjected to Thermal Loading with Random Material Properties Effect of Blend Ratio on Phase Morphology and Mechanical Properties of High Density Polyethylene and Poly (Butylene Succinate) Blend The Synergistic Activity of the Extracts from Mango and Cassia fistula Polysaccharide in Cotton Fabric Finishing Influences of Coagent Hybrid Ratios and Silanes on Viscoelastic Properties of Silica-Filled HNBR XIV. Materials Processing, Modeling and Technology Evaluation of Cadmould Software to Simulate the Filling Phase of a Natural Rubber Compound in Injection Moulding Process Effect of Reinforcement and Processing Methods in PP/MWCNTs Nanocomposites Oxygen Storage Capacity of CexZr1-xO2 (0.4 x 0.8) Solid Solution Using Thermogravimetric Analysis Sintering and Mechanical Properties of Injection Molded Low Cost Ti Alloys Fabrication of High Resolution Microstructures Using Micro Hot Embossing with a Precision Rapid Tooling Space-Charge-Limited Bipolar Currents at High Fields in Polymer/C60 Diodes: A Simple Model Description Rheological Behavior and Extrudate Swell of Polypropylene/Silicon Carbide Composites Enhancement on Stability of Nanosized Titanium Dioxide in Silicone Suspension Using Diblock Copolymer: Influence of Dispersant Structure Ba0.9 A0.1TiO3 (A = Al and Mg) Powders Synthesized by Solid State Reaction Technique and their Dielectric Properties Natural Rubber-Toughened Polystyrene: Effects of Mixing Procedure and Maleic Anhydride Content on Impact Property and Phase Morphology The Sequential Analysis of Film Deformation Behavior during Successive Biaxial Stretching Process Effects of Passes on Equal Channel Angular Pressing of 6061 Aluminium Alloy Fabrication of Fe-36Ni Alloy Powder from its Scrap Effects of Mold Temperature and Casting Temperature on Hot Cracking in Al-4.5 wt.% Cu Alloy Flow Properties and Melt Distortion in Molten Rubber Compounds under Capillary Extrusion Development of Hyperelastic Model for Weldlines Containing Natural Rubber Molded Part Synthesis of In2O3/BiOCl Composite Photocatalyst and its Photocatalytic Activity for the Degradation of Rhodamine B under Visible Light Irradiation The Effect of Natural Rubber Toughening on Mechanical Properties of Poly(lactic Acid)/Multiwalled Carbon Nanotube Nanocomposite XV. Green Materials Tensile Properties of Polypropylene/Cocoa Pod Husk Biocomposites: Effect of Maleated Polypropylene Corn Cob Filled Chitosan Biocomposite Films Effects of Various Co-Surfactants and Oils on Microemulsion Formation in Decylglucoside System Elaboration and Characterization of a Novel Biobased Poly(Furfurylalcohol)/Silica Nanocomposite Application of Non-Destructive Testing for Measurement of Strength Development of Biocemented Sand Influence of Amino Acids on Anti-Oxidative Properties of Green Natural Rubber and Natural Rubber Compound Biodegradation Studies of Attapulgite Clay Filled Polyvinyl Alcohol/Modified Corn Starch Blend Films: Microbial and Enzymatic Characterization and Properties of Nucleated Polylactide, Poly(butylene adipate-co-terephthalate), and Thermoplastic Starch Ternary Blend Films: Effects of Compatibilizer and Starch Comparative Study of the Bio-Disintegration Behavior of Polylactic Acid under Laboratory and Pilot-Scale Composting Conditions Water Diffusion Mechanisms in New Bio-Nanocomposites Based on Polyhydroxyalkanoates/Nanoclays Preparation of "Green" Microcapsules for Corrosion Protection: Linseed Oil Encapsulated PF Microcapsules Bimetallic LaNi1-xCoxO3 (x=0, 0.3, 0.5, 0.7, and 1) Perovskite Catalysts for Tar Reforming to Syngas Extraction of Keratins from Human Hair at Low Pressure and their Characterization Evaluation of Mechanical and Thermal Properties of MCC/PLA Composite Compatibilized with Modified Cellulose Effects of Natural Rubber Origin on Mechanical Properties of Rubber Compound in the Presence of Natural and Commercial Antioxidants Development and Characterizations of Green Coupling Agent Coated Fly Ash Reinforced Recycled Polypropylene Matrix Composites Extraction of Keratin from Chicken Feather and Electrospinning of the Keratin/PLA Blends Papers as Functional Green Materials XVI. Others Effects of Frequency and Sonication Time on Ultrasonic Degradation of Natural Rubber Latex Factors Affecting Formation of Emulsions Containing Soybean Oil Theoretical Analysis and Verification of Plasticating Screw Characteristics for Injection Molding Machine Synthesis and Thermal Stability of Cross-Linked Carbazole-Substituted Poly(dimethylsiloxane) for LED Encapsulation Experimental Investigation of Magnetic Field Assisted Electro Discharge Deposition Process Study on the Antioxidant Activities of Gel Containing Tagetes erecta (L.) Morphology and Mechanical Properties of Natural Rubber-PCL Core-Shell/PLA Composites The Crystallization Kinetics of Polypropylene/Organo Montmorillonite Nanocomposites Modified with Calcium Pimelate Kinetic Studies on the Curing Reactions of Fluoroepoxy Oligomer and Cycloaliphatic Amine Fabrication of Porous Copper Layers by Two-Steps Process: Electrodeposition and Combustion Exterior Calculus: Thermodynamics and Navier-Stokes Dynamics Radio-Frequency Sensors for Nondestructive Evaluation of Materials The Evaluation of Mixing Characteristics of Dulmage Screw Seismic Performance Enhancement of Non-Ductile RC Columns Using Steel Fiber Reinforced Concrete (SFRC) An Investigation of Optimum Cutting Conditions in Face Milling Semi-Solid Cast 6061 Aluminum Alloy Using Carbide Tool Phase Structure, Microstructure and Electrical Properties of Lead-Free (1-x) [Na0.515K0.485]0.94Li0.06(Nb0.99Ta0.01)O3 - BiAlO3 Ceramics Temperature-Induced Shape Memory Characteristics of Epoxy Resin-Based Fabric-Reinforced Composites

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB14263450
• ISBN:
  • 9783037857717
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: xxiii, 785 p.
• 大きさ: 24 cm
• 親書誌ID:
  • BA24926058