Metallurgy technology and materials II : selected, peer reviewed papers from the 2013 2[nd] International Conference on Metallurgy Technology and Materials (ICMTM 2013), June 25-26, 2013, Hong Kong, China

Author(s)

    • International Conference on Metallurgy Technology and Materials
    • Varma, K.B.R.

Bibliographic Information

Metallurgy technology and materials II : selected, peer reviewed papers from the 2013 2[nd] International Conference on Metallurgy Technology and Materials (ICMTM 2013), June 25-26, 2013, Hong Kong, China

edited by K.B.R. Varma

(Advanced materials research, v. 813)

Trans Tech Publications, c2013

  • : pbk

Available at  / 1 libraries

Search this Book/Journal

Note

[nd]: superscript

Includes bibliographical references and indexes

Description and Table of Contents

Description

Volume is indexed by Thomson Reuters CPCI-S (WoS). Collection of selected, peer reviewed papers from the 2013 2nd International Conference on Metallurgy Technology and Materials (ICMTM 2013), June 25-26, 2013, Hong Kong, China. The 108 papers are grouped as follows: Chapter 1: Metallurgy Technologies and Materials, Manufacturing Engineering; Chapter 2: Minerals and Mining Engineering; Chapter 3: Advanced Materials Science and Technologies; Chapter 4: Materials Processes Technology.

Table of Contents

Preface, Committees and Sponsors Chapter 1: Metallurgy Technologies and Materials, Manufacturing Engineering Research on Reverse Engineering for Blades of Axial Flow Compressors Based on Parameterization Metal Impurities Removal from Metallurgical Grade Silicon by Hydrochloric Acid Leaching Distribution of Representative Impurities in Metallurgical-Grade Silicon Using CaO-SiO2-CaF2 and CaO-SiO2-CaCl2Slags The Artificial Neural Network Modeling of Dynamic Hysteresis Phase Diagram: Application on Mean-Field Ising Hysteresis Effect of Crack Opening on Distribution of Magnetic Flux Density around Fatigue Cracks Numerical Simulation of Cathodic Protection for Jack-Up Platform Discussion of Track Tension for Heavy Tracked Vehicles Effect of Heat Treatment on the Bending Behavior of STS/Al/STS Hybrid Metal Plates Corrosion and Soldering Behaviour of STD61 Coated by Arc Ion Plating Coatings Mechanical Behavior of 3-ply Cu-Ni-Zn/Cu-Cr/Cu-Ni-Zn Composite Plate Processed by Roll Bonding Mechanical Property of (Al, Mg)B2 Phase Reinforced Al-Mg-B Alloys Structure Relaxations during the Isothermal Annealing of Amorphous Ca7Mg3 Alloy Reaction Kinetics of Mg2Si in the Laser Welding Pool of Aluminum Alloys Dynamic Material Flow Analysis of Steel Resources in China Based on Circular Economy Theory Effect of Solution Annealing and Low Temperature Ageing on the Microstructures and Superelastic Behaviour of Ti-50.7at.%Ni Alloy Interoperability Challenges of ERP Implementation in a Collaborative Manufacturing Environment High Pressure Torsioning of Cu-9Fe-1.2X(X = Co, Ni, Ag) Microcomposites and their Microstructural and Mechanical Evolution Mechanical Reliability of Oxidized Zr-1.1Nb-0.5Cu Alloy Nuclear Cladding Tube in Compression Effect of Calcium Fluoride and Magnesia on the Performance of Tundish Coverture Fluxes Made of Blast Furnace Slag The Effects of Chromium-Free Insulating Coating on the Magnetic Properties in Grain-Oriented Electrical Steel Effect of Heat Treatment on the Mechanical Properties of Roll-Bonded Al3003/STS439 Hybrid Plate Research on Optimization of the Electric Cylinder Buffer Made in Polyurethane High Temperature Deformation and Creep Behaviors of Directionally Solidified (DS) Inconel 738LC Crystals Homology Analysis of Prior Austenite Grain Size of SAE52100 Bearing Steel Processed by Cyclic Heat Treatment Homology Estimate of Grain Size Measurement Based on the JIS Samples Green Growth vs. Leap-Forward Development in Less Developed Regions: A Case Study of Jiangxi Province of China Nickel Base Alloy Powder Spray Welding Process Application in Production High Temperature Oxidation of Al-Alloyed SiMo Cast Iron in CO2-Containing Atmospheres Effect of Controlling Process Parameters on Shrinkage Porosity in Aluminum Die-Casting Rotor FEA of Planetary Pipe Rolling Process for Stainless Steel Multi-Layer Metal Matrix Alloy Surfacing Composite Material Fusion Research on the 45Mn-Austenitic Stainless Steel-(Cr-Ni) System Hydrometallurgical Pretreatment Process for the Recovery of Valuable Metals from the Lead Anode Slime Effect of Cooling Rate on the Microstructure of Al-5.17Cu-2.63Si Cast Alloy Processing Optimization of Optical Lens in the Injection Molding Experimental Study on Geometries Energy Absorption of Fiber Metal Laminated Mild Steel under Axial Compression Influence of Process Parameters on the Fluidity of High Pressure Die-Casting Al-Si Alloys The Effect of Alloying Elements on Thermal Conductivity of Aluminum Alloys in High Pressure Die Casting In Situ Synthesis of TiB2-TiC0.8-40vol%SiC by Hot Pressing Conceptual Design of a Multi-Functional Hot-Dip Galvanizing Simulator Technological Status and Tendency of Modern Blast Furnace Philosophy and Application on Circulating Economy for Contemporary Steel Plant Research on Task Sequencing of Mixed Model Assembly Workshop Based on Improved AHP Advantages of MEMS and its Distinct New Applications Multi-Purpose Hydrocyclone Research and Application Chapter 2: Minerals and Mining Engineering Analysis on the Construction of Psychological Assistance Mechanism of Emergency Coal Mine A Research on Tailings Reprocessing from Da-Hongshan The Preliminary Results of Rock Physical Properties in Yudu-Ganxian Ore Concentration Area A Copper Oxide Ore Treatment by Flotation Roughing Conditions Research to Recover a Nickel Ore Experimental Research on Flotation of Copper Oxide Ore in Guizhou Restoration of Disturbed Lands as the Factor of Environment Safety and Population Health in Mining Towns in the South of the Russian Far East Estimation of Effect of Hypergene Processes Proceeding in the Mining-Industrial Technogene System on the Hydrosphere of Dal'negorsk District Using Physicochemical Modeling Method (Primorsky Region) The Study on the Mineral Phase Transformations and Thermodynamics of Laterite Ores Calcination Magnesium Recovery from Desiliconization Slag of Nickel Laterite Ores by Carbonization The Flotation Test of Collophanite in Yunnan Province The 2D and 3D Stability Analysis of Spreader for Open-Pit Iron Mine Study on the Beneficiation Process of a Nickel Oxide Ore Optimizing Operational Performance of Diesel Mining Truck Using Thermal Management The Study of Fluid Inclusions in Haoyaoerhudong Gold Deposit The Application of High Strength Anchor about Compound Roof Support about in Guantun Coal Mine A Discussion on the Reuse of Disused Mining Areas from a Land Reclamation Point of View, Using Dayoukeng as an Example Studies of Mineralogical Characteristics on Vanadium Titanium Magnetite in Hongge Area, Panzhihua, Sichuan, China Effect of Ca2+ and Mg2+ on Floatability of Smithsonite and Hemimorphite Research on Gas Extraction from High Gas Coal Seam Group Chapter 3: Advanced Materials Science and Technologies The Competition Effect of Strain and Interatomic Distance on Ferromagnetic Critical Temperature in Ising Ultra-Thin-Film: Monte Carlo Simulation Investigation of Temperature-Driven Ferroelectric Phase Transition via Modified Heisenberg Model: The Monte Carlo Simulation Dependence of Neel Temperature on Ultrathin Film Thickness Influence of NaOH Quantity upon the Size and Luminescent Property of Core-Shell Gd2O3:Tb3+ /SiOx Nanoparticles High Pressure Properties of Superconducting Material Palladium Preparation and Study of Rare Earth Oxide Nanoparticles with Core-Shell Structure Performance of Vertically Aligned MWCNTs/Ni/Ti/Au/Si Electrode for Supercapacitors by CVD Characteristics Study of Radio Frequency Sputtered TiO2 Films on ZnO Nanorods Grown by Hydrothermal Method Investigation on Recovery and Recrystallization of Al-Si-Al2O3 Composites High Sensitive Capacitive Touch Panel with Chain or Mountain-Shaped ITO Electrodes Study on Micro-Fracture Chaotic Evolution under External Loading Rock Research on the 45Mn Materials Forging Properties Effect of LiCl*H2O on Sintering Properties of MgO from Bischofite Investigate the Characteristics of 0.65(K0.5Bi0.5TiO3)-0.35BaTiO3 Films at Various Deposition Temperatures The Study of Rheological and Mechanical Properties of the Antarctic Krill Protein/Sodium Alginate Fibers Research on Performances of Environmentally Friendly Multi-Component Corrosion Inhibitor A New Fast Multipole Boundary Element Method for Solving 3-D Elastic Problem Strength Development of Soft Bangkok Clay Mixed with Cement Experimental Study on Elastic Stiffness of Kaolinite Clay Controlled Release Behaviors of Ketoprofen from Matrix Polymer of Chitosan and poly(ethylene glycol) Study on Sodium-Calcining of Boron Concentrate Influence of Frequency on Fretting Fatigue Damage Behavior of Al-Zn-Mg Alloy Preparation of Copper Doped L-Threonine Modified Electrode and its Application in Determination of Hydroquinone Research on Manufacturing Process of Carbon-Carbon Composites as Ablation Resistance Materials Effects of Mn and Ca Additions on Microstructure and Mechanical Properties of Al-Mg Alloy Intelligent Numerical Manipulation of Micrometer-Scale Emulsions Using Polymer Confinement Chemical Bath Deposition of ZnS Buffer Layers Chapter 4: Materials Processes Technology Effects of Chloride and Sulphate Ions on the Experimental E-pH Diagrams of AISI 316L Stainless Steel in Deaerated Aqueous Solutions Effects of H2 Flow Rate and H2 Plasma Treatment on the Properties of AZO Films Recovery of Copper from Waste Printed Circuit Boards by Suspension Electrolysis Experimental Measurement of Induction Period of Gypsum Precipitation in the Laminar Flow State Surface Quality Prediction of Atmospheric Pressure Plasma Arc Cleaning Based on Least Square Support Vector Machine Study on Surface Pre-Treatment of FeCrAl Metallic Substrate for Hydrogen Production Catalysts The Influence of Modification Conditions on Activation of Coal Fly Ash Vibration-Assisted Electrochemical Polishing for Extremely Smooth Surface Generation Prediction of Properties of Cu-15Ni-8Sn Alloys Based on Least Square Support Vector Machines Decomposition of Ilmenite by Ammonium Hydroxide Research Advances on Application Status and Non-Thermal Efficiency of Microwave Pyrolysis Precipitation Phase and Impurities Distribution of Metallurgical Grade Silicon by Vacuum Refining Followed Slag Treatment Boron Removal from Metallurgical-Grade Silicon by Slag Refining with Yttria-Silica System Preparation of Porous Mullite Ceramics with Low Thermal Conductivity Removal of Cr(III) from Acid-Dissolution Water of Chromium Sludge by Cation Exchange Resin Study on the Removal of Cadmium from Underground Water Using a Complex Modulation Electromagnetic Device Based on Correlation of Electromagnetic Field and Electrical Conductivity Derivation of Optimum Study Factors for Samples Contaminated with Cd Using Electric/Magnetic Field and ORP

by "Nielsen BookData"

Related Books: 1-1 of 1

Details

Page Top