Innovative manufacturing engineering : selected, peer reviewed papers from the International Conference on Innovative Manufacturing Engineering, (IManE), May 23-24, 2013, Iași, Romania
著者
書誌事項
Innovative manufacturing engineering : selected, peer reviewed papers from the International Conference on Innovative Manufacturing Engineering, (IManE), May 23-24, 2013, Iași, Romania
（Applied mechanics and materials, v. 371）
Trans Tech Publications, c2013
- : pbk
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Collection of selected, peer reviewed papers from the International Conference on Innovative Manufacturing Engineering (IManE), May 23-24, 2013, Iasi, Romania.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 177 papers are grouped as follows:
Chapter 1: Advanced Machining and Surface Engineering, Assembling Technologies;
Chapter 2: Forming Technologies;
Chapter 3: Non-Conventional Technologies in Manufacture and Industry, Welding Technologies;
Chapter 4: Advanced Materials and Construction Technologies;
Chapter 5: Flexible Manufacturing, Automation and Robotics in Technological Processes;
Chapter 6: CAD/CAM/CAE/CAx Technologies, Manufacturing Optimization;
Chapter 7: Mechanical and Manufacturing Equipment, Devices and Instrumentation, Design and Analysis;
Chapter 8: Innovation, Creativity, Learning and Education in Engineering;
Chapter 9: Industrial and Product Management, Quality and Evaluation.
目次
Preface, Committees and Sponsors
Chapter 1: Advanced Machining and Surface Engineering, Assembling Technologies
Structural and Technology Support Quality Improvement of Gear Coupling
Increase of Firmness of Milling Cutters with Variable Cutting Velocities along the Length of Teeth Cutting Edges
Optimization of the Tool Life and the Cutting Speed in Terms of Productivity at Drilling of the Stainless Steel 10TiMoNiCr175
Mathematical Model for Economic Optimization of the Tool Life and the Cutting Speed at Drilling of the Stainless Steel X6CrNiTi18-10
Intensification of Finish Turning of Stainless Steels with the Use of Technological Cutting Fluids
The Influence of the Lubrication Method and the Cutting Regime on the Surface Roughness when Milling 7175 Aluminum Alloy
Contribution at the Calculation and Variation in Time of the Surface Roughness Produced by Turning Process
Study of the Uncut Chip in 5 Axes Ball Nose End Milling for the Third Quadrant of the Tool Inclination
Performance Analysis of a Layout of an Assembly Line Supplied Based on Stock or Synchronous
Experimental Design Methodology in Ball End Milling of C45 Material by Using Tool Tilt Angle - Analysis and Estimation of Surface Roughness Variation
Contributions on the Influence of the Cutting Parameters and Constructive Geometrical Parameters of the Tool on the Precision of the Worm Gears Manufactured Using Whirling Thread Cutting
Influence of the Temperature and Mechanical Stresses Generated by Milling Process in Machined Part Surfaces on their Accuracy
Mathematical Modeling of Thermocurrent Parameters for Roughness Assessment in Turning
Design of an Automatic Tool Changer System for Milling Machining Centers
V Prism Special for Centering Devices
Technological Failures Research at Aluminum Parts Processing on Automatic Lathes
Computer Aided Measurement of Elastic Deformations of a Work Piece in the Turning Process
Cooling Capability of Cutting Fluids in Grinding
Basic Research for the UV Fixed Abrasive Lapping Plate
The Study of Elastic Strains of Parts from the Grinding Technological System
A Comparison between the Wear of the Ball Nose End Mill Generated in 4 Axes Milling and in 5 Axes Milling
Experimental Researches upon Changes of a Pipe's Roughness after Hydroformation
Functional Modeling of an Assembly Line Supplied in Synchronous
High Precision Rotary Table Used on Milling Machining Centres
Surface Integrity of Ti6Al4V Alloy under Dry Sliding Conditions
Chapter 2: Forming Technologies
Determination of Technological Forces in the Incremental Forming Process
Applying the Networks Division Method for Studying the State of Deformation of Semi-Finished Sheet Submitted to Technological Cutting Operations
Influence of the Blankholder Force on the Accuracy of the Rectangular Drawn Parts Made from Steel Sheets
The Residual Stress State Generated by Single Point Incremental Forming of Aluminum Metal Sheets
Influence of the Clearances in the Stamping Device upon the Burrs Resulted on the Stamped Bearing Cages Windows
Simulation of the Pressing Process with Combined Forces by Using ABAQUS Software
Influence of the Thickness Value on the Mechanical and Formability Properties of the CuZn37 Thin Sheet Metal
Experimental Researches on the Limit Angle of Conical Parts Manufactured by Single Stage Incremental Forming on CNC Lathes
Drawing Study of Sheet Bimetallic Brazed Parts
Blank Shape Optimization in Deep Drawing with Combined Restraint
Methods to Increase the Rigidity of the C-Frame of a Press
Dimensional Accuracy of the Molds Built on Rapid Prototyping under the Influence of the Investment Casting Heat Processes
Chapter 3: Non-Conventional Technologies in Manufacture and Industry, Welding Technologies
Dimensional Analysis of Electro-Separation Kinetics of Particles from Dielectric Liquids
Rapid Manufacturing of Microwave Circuits on Low-Cost Substrates Using Laser Machining
Experimental Research on Quality Assessment of Ultrasonic Cleaning Process
Economic Efficiency of Using Rapid Prototyping Technology
Aspects of Finite Element Analysis of Microdrilling by Ultrasonically Aided EDM and Related Knowledge Management
Customer Matrix with Different Time Horizons Applied to Electrodischarge Machines
Specific Aspects on Modelling and Simulation of the Synchronized Ultrasonic Assistance of the Electro-Discharge Machining Process
Photogrammetric Scanning Technique and Rapid Prototyping Used for Prostheses and Ortheses Fabrication
Environmental Attributes of EDM Process
Influence of the Distance between the Cutting Head and Working Sample on the Geometric Precision in Water Jet Abrasive Cutting Process
High Pressure Water Jet Cutting of the Al 6061 T651 Aluminum Alloy
Industrial Parts for Investment Casting Built on the Rapid Prototyping Systems
Aspects Regarding the Technologies on Wire EDM CNC Machines
Modeling by Finite Element Method of Thermal Field when Coating with Stellite Welding of Valvetype Parts
Researches about Mechanical Characteristics of some Steels Resistance Spot Welded
The Influence of the Diffusion on Adherence of the 60T Deposits Obtained by Thermal Spraying in Electric Arc
Investigation Concerning Maximal Forming Depth of Tailor Welded Blanks Made from same Material but Different Thickness Ratios
Research on Producing Complex Metal Parts with Lattice Structure by Selective Laser Melting
Some Aspects Regarding Micro-Scale EDM Drilling Process
Machinability Evaluation by Single Electrical Discharge
Workpiece Clamping at Laser Beam Machining
Formation of the Optimal Machining Process Based on the Analysis of Design and Technological Dimension Relations
Diminishing Shape Errors at Electrical Discharge Machining of External Cylindrical Surfaces
Comparative Analysis of the Quality of Parts Made by an Aluminum Alloy Processed by Unconventional Cutting Methods
Direct Moulding of Rubber Granules and Powders from Tyre Recycling
Chapter 4: Advanced Materials and Construction Technologies
Drying Process Modelling for Heavy Clay Products Using a New Thin Layer Drying Model
Experimental and Mathematical Considerations on Roughness Resulting from "ATSi12CuMgNi" Turning Alloys Using Poly-Crystalline Diamond Tools
Spring-Back of Pre-Strained High Strength Steel Stripes
Studies Concerning the Corrosion Behaviour of the Cast Stainless Steel Used for Chemical Industry
Studies Concerning Variation of the Friction Coefficient in Case of Polymeric Composite Materials Reinforced with Carbon Fibers
Experimental Studies Regarding Mechanical Behaviour of Textile Reinforcements Laminated Composite Materials
The Corrosion Resistance of NiTi-Active Element before and after Thermo-Mechanical Solicitation
Object Oriented Finite Element Analysis on Microstructure for W1.8507
Researches Regarding Ti/W/TiC Triple Layers Deposition on the Ferritic-Pearlitic Cast Iron Support, Obtained by Electro-Spark Deposition Method
Preliminary Results of Copper Based Shape Memory Alloys Analyze Used for MEMS Applications
Correction to the Wills-Harrison Approach: Influence on the First Minimum of the Effective Pair Interaction
Researches on Mechanical Proprieties of Wooden Materials Used in Furnishings Production
Controlled Properties of the Thin Films of Ni0.5Zn0.5Fe2O4- BaTiO3 Ferrite-Ferroelectric Nanocomposites - Simulational Study
Simulation Determination of the Electromagnetic Parameters for the CdCr2S4 Multiferroic Relaxor in GHz Range
Research Concerning the Optimum Extrusion Temperature for Reinforced Polyamide
Chapter 5: Flexible Manufacturing, Automation and Robotics in Technological Processes
Automated Stand for Non-Destructive Testing Evaluation of Metal Products
The Influence of Kinematic Joints Clearances on the Positioning Accuracy of 3DOF Delta Parallel Robots
Poly-Articulated System with Spatial Positioning
Robot-Forming - An Incremental Forming Process Using an Industrial Robot by Means of DELMIA Software Package
Transmission Ratio Optimization of Electric Driven Palletizing Mechanism
The Automatic Configuration Method of Modular Structures Composing Multi-Axis Heads
Application of Tree Graph Method for Reducing the Total Time of Tool Changing in Milling and Boring Machine Tools
Neck Design Solution Adopted in the Development of a New Social Robot
Chapter 6: CAD/CAM/CAE/CAx Technologies, Manufacturing Optimization
Advanced Integrated Design Method for Fatigue Assessment of Large Elastic Ship Structures
FEA Study on the Elastic Deformation Process of a Simple Bimetal Beam
Harmonic Gear Modeled in SolidWorks
CAD and CAE Analysis of Devices Connection Cable, DLC-1, 2 and 3
Alternative Method for Segmenting Digitized Data in Reverse Engineering
Converting Point Cloud to Revolved Solids
Customized Software Tools Integrated in Reverse Engineering Process of Rectangular Parts with Holes
Estimating the Life-Cycle of the Medical Implants Made by SLM Titanium-Alloyed Materials Using the Finite Element Method
Constructing 3D Surfaces from Random Sets of Points by Means of Level Curves
Intelligent Management of Dies and Molds CAD Projects
Graphical Representation of Solids - An Important Issue in Teaching Technical Drawing
About CAD Activities Effectiveness and Efficiency as Instruments for Sustainable Product Development
3D Parametric Modeling for Complex Parts Generation
Modeling of Stress in Drills with Curved Cutting Edges
Designing an Innovative Face-Milling Cutter
3D Measuring of Complex Automotive Parts by Multiple Laser Scanning
Study of Cooling Parameters Using Fluid Jet in Milling Process Simulation
Virtual Simulation of Plastic Injection Technology for Medical Devices
Study of Flow Font Advancement during Filling Stage of a Spiral Mold
Studies about Movement Biofidelity of a Dummy Neck Used in an Impact Testing Device
Parts in CATIA Based on Reverse Engineering Technique
Modeling, Simulation and Optimization of a Human Knee Orthotic Device
Ankle Foot Orthoses with Wire Insertion
Chapter 7: Mechanical and Manufacturing Equipment, Devices and Instrumentation, Design and Analysis
Theoretical-Applicative Research on Design and Implementation of a Special Dynamometer
Dimensional Stability Analysis of Unconventional Treated Steel Bearings
Numerical Analysis of Load Carrying Capacity in the Contact between High-Order Surfaces
A Numerical Study of the Partial Slip Elliptical Contact under Fretting Conditions
The Influence of the Operating Conditions on the Lubrication Regimes of Ball Screws
Assessment Procedure of Technological Consumption in the Natural Gas Distribution Systems
A Study of an Ion-Drag Pump Characteristics
Influence of Microtube Heating Geometry on Behavior of an Alumina Nanofluid at Low Reynolds Numbers
Study of Micro Hydropower Plant Operating in Gravitational Vortex Flow Mode
The Mathematical Model for Studying Bearing Reliability Unconventional Treated
Measuring System Analysis of the Video Equipments for Quality Measurements and Quality Control in the Automotive Industry
Mathematical Model and Algorithm to Optimize the Construction of Adjustable Multi-Axis Heads
Vibration Analysis Methods in Bearing Damage Detection
System for Compensating the Rigidity of the Hydrostatic Guideways of the Column Saddle Subassembly of the Boring and Milling Machines
Device for Supplying the Hydrostatic Pockets with Compensation of the Fluid Temperature
Researches upon the Maintenance of the Railway Wagons Brake System
Aspects of Mathematical Modelling of Heat and Mass Exchange at Burning of Droplet of Water Fuel Oil Emulsion
Modeling of Railway Vehicles for Virtual Homologation from Dynamic Behavior Perspective
Structural Analysis of a Flange Coupling without Clearance
Electrical Elements in Reduction of Mechanical Vibrations
Designing a Specialized Devices for Correction of the Axis Deviation at the Human Leg
Improving Functional Parameters for Hydro-Mechanical Systems from Treatment Station of Water
Design and Manufacturing of a Low Head Banki Turbine
Optimal Pump Scheduling to Reduce the Operating Costs
Heat Transfer Modeling for a Plate Heat Exchanger used in Solar Power Systems
Industrial Rollers in PUR Made for Slaughterhouses
Determining the Calibration Life of Measuring Devices by Means of Parameter Deviation Function
Research on Accidental Defects to Bearings of Mining Equipment
Influence of Tool Clearance Values on the Quality of the Small Drawn Parts
Influence of the Blank Initial State on the Quality of the Small Drawn Parts
Crashing Behaviour Analysis of TWB Thin-Walled Structures with Various Cross-Sections
Procedure and Equipment for Circularity Test of Inner Section of Bent Tubes
Chapter 8: Innovation, Creativity, Learning and Education in Engineering
Research on Improving the Assessment Process of Students' Knowledge in the Field of Materials Processing
Management and Assessment of Curricula in Technical Higher Education
Project-Based Learning in Higher Education
The Importance of Teaching GIS in Engineering
Improving Teaching Staff Lifelong Learning Using Fuzzy Algorithms
"Mechatronics Galaxy" a New Concept for Developing Education in Engineering
The Role of Internship in Transversal Competence Development of Industrial Engineering Graduates
Creative Teaching Methods for Educating Engineers
Machine Learning and Creative Methods Used to Classify Customers in a CRM Systems
Chapter 9: Industrial and Product Management, Quality and Evaluation
Advanced Quality Planning of Manufacturing Products - APQP
Safety Evaluation of the Pipelines Systems for Petroleum Products
Organization of Production Processes through the Multi-Service Method by Performing some Identical Operations of the same Duration and Structure
Optimizing the Thermal Physiological Comfort by Introducing Peltier Cells in Simulated Conditions
System for the Management of Raw Materials Based on RFID Technology
Advanced Product Quality Planning Reference Model in Automotive Industry
A Point of View on Functional Approaches Used in Product Design
Contributions to Ranking an Ergonomic Workstation, Considering the Human Effort and the Microclimate Parameters, Using Neural Networks
Aspects of Quality Assurance in Glass Bricks Manufacturing Process
Improvement of Process Failure Mode and Effects Analysis Using Fuzzy Logic
Improving the Company Performance by Using Energy Audit Method
Application of Fuzzy Logic in Design Failure Mode and Effects Analysis
Improving Maintenance Activities of Machine Tools
Intangible Assets Identification and Valuation in a Company
Use of Ontological Classes in the Exploration of User Needs
Innovative Development of One-Off and Small Series Products
Planned Obsolescence and the Product Lifecycle
PLM Innovation Matrix for a Complex Product Development Process
Integrated Product Development Using Different Collaborative Tools in a PLM Multisite Platform
Using a Systematic Innovative Approach - Acting/Support Matrix to Develop a Product
Broadening the Use of Product Development Ontology for One-Off Products
Method for Determining the Gear Wheels Profile
The Role of the Eco-Requirements in the Sustainable Product Development Based on the Axiomatic Design Principles
Conceptual Research Model of Factors that Influence Environmental Knowledge Management at Organizational Level
Designing Peculiarities and Classification of Compositional Technologies in Mechanical Engineering
Horizontal versus Vertical Heat Distribution in Multi-Storey Buildings
A Conceptual Model of Product Design
An Approaching on Fuzzy Logic Application for Typical Parts Manufacturing
「Nielsen BookData」 より
