Advanced design and manufacturing technology III : selected, peer reviewed papers from the 3[rd] International Conference on Advanced Design and Manufacturing Engineering (ADME 2013), July 13-14, 2013, Anshan, China
Author(s)
Bibliographic Information
Advanced design and manufacturing technology III : selected, peer reviewed papers from the 3[rd] International Conference on Advanced Design and Manufacturing Engineering (ADME 2013), July 13-14, 2013, Anshan, China
（Applied mechanics and materials, v. 397-400）
Trans Tech Publications, c2013
- : [set]
- Part 1
- Part 2
- Part 3
- Part 4
Available at / 1 libraries
-
Part 1A69500/397-1400063311,
Part 2A69500/397-240006332X, Part 3A69500/397-3400063338, Part 4A69500/397-4400063346 -
No Libraries matched.
- Remove all filters.
Note
[rd]: superscript
Includes bibliographical references and indexes
Description and Table of Contents
Description
Collection of selected, peer reviewed papers from the 3rd International Conference on Advanced Design and Manufacturing Engineering (ADME 2013), 13-14 July, 2013, Anshan, China.
The 547 papers are grouped as follows:
Chapter 1: Advanced Manufacturing Technology;
Chapter 2: Advanced Equipment Manufacture;
Chapter 3: Fluid and Flow Engineering;
Chapter 4: Dynamic Systems and Analysis, Machinery Dynamics and Dynamic Modelling;
Chapter 5: Advanced Computer-Aided Design and Modelling Technologies in Mechanical Engineering and Mechanisms;
Chapter 6: System Analysis and Industrial Engineering;
Chapter 7: Innovative Design Methodology and Product Design;
Chapter 8: Intelligent Optimization Design and Reverse Engineering;
Chapter 9: Mechatronics, Automation and Control, Detection Technologies;
Chapter 10: Industrial Robotics and Machine Vision, Navigation and GPS Technology;
Chapter 11: Sensor Technologies;
Chapter 12: Measurement and Monitoring Technologies;
Chapter 13: Power, Energy, Microelectronic Technology and Embedded System;
Chapter 14: Communication Technology, WEB and Network Engineering;
Chapter 15: Signal and Intelligent Image, Video Information Processing, Data Mining;
Chapter 16: Software Development and Application;
Chapter 17: Computer Applications and Information Technologies in Industry and Engineering;
Chapter 18: Production and Operation Management, Supply Chain, Electronic E-Commerce and Internet of Things Application;
Chapter 19: Management and Education Engineering.
Table of Contents
Preface and Conference Organization
Chapter 1: Advanced Manufacturing Technology
A Density-Based Potential Mission Risk Assessment Approach for Aerospace Products
A New Value Stream Mapping Technique Based on Material Flow, Information Flow and Knowledge Flow
A Rapid Simulation and Optimization Study of Production Line
Research on Trusted Manufacturing
Software Framework for Advanced Error Troubleshooting in Flexible Manufacturing System
Application of Cleaning Technology in the Remanufacturing for Loader's Axles and Transmission Box Components
The Study of Production Process System of New Multi-Feature Continuous Reel Soft Pack Trademarks
Tabu Search-Based Formation of Reconfigurable Manufacturing Cells
Evaluation of Knowledge Resource Service Ability Based on Robust Projection Pursuit - Principal Component Analysis under Cloud Manufacturing Environment
Formation of High Aspect Ratio Macropore Array on N-Type Silicon
Dynamic Error Modeling Research of On-Machine Measurement System Based on Bayesian Network
Study on a Green Manufacturing Process Design System
Technology Research on the Fluidization Treatment of High-Titanium Slag to Manufacture Synthetic Rutile
Properties of Process Gas Combustion Products
Parameters Research of Precise Straightening Process in Roller Leveler
Multi-Directional Squeeze Casting Based on the Uniform Internal Structure of Solidified Body
Analysis of Multi-Directional Squeeze Casting Liquid Forging of Sewing Machine Oil Chassis
Time-Pressure Switch Control for Fluid Dispensing Process Based on Self-Adaptive Model
Chapter 2: Advanced Equipment Manufacture
The Design of Double Rotary Double Beam Self-Defense 20t Longmen Crane
Aspects of Design and Manufacture of a Three-Dimensional Fibre Optic Laser Doppler Probe Head
The Shape Optimization Study of the Rolling Wheel of CNC Crushing Machine
Determination and Analysis of the External Load Change Characteristic of Loader Steering Cylinder
Design Method of Offsetting Transmission Ratio of 6 Tons Truck Car
Finite Element Analysis for Thermal Characteristics of High Speed Angular Contact Ball Bearing
A Study of High-Speed Angular Contact Ball Bearing Thermo-Mechanical Coupling Characteristics
Application of Extenics Theory to Accuracy Evaluation of Machining Center
A Primary Design of the General Scheme on Modular Vertical Lathe
The Research and Experimental Study of Fully Automatic CNC Grooving Machine
Study on the Design of Cantilever Crane in Wind Turbine
The Research and Development of Hydraulic Support Applied for Thin Coal Seam
Design and Manufacturing of Cylinder-Beam Integrated Hydraulic Press
Design and Optimization Based on the Spindle of Automatic Clamping Lathe
A New Redundant Device for Monitoring Mechanical Press Slider Second Fall
Design on Small Multi-Function Chassis Manipulator Device
Design and Manufacture of a Planetary Gearbox Rig
Optimization Design of Dryer Machinery in Tunnel Washing System
Research on Sewage Treatment by Combined Two-Phase ABR and SBR
The Research of the Assembly Precision of CNC Machine Tools Considering the Joint Surface Characteristics
Chapter 3: Fluid and Flow Engineering
Investigations of Energy Separation Effect in Vortex Tube for Natural Gases
Parameter Computation of Equivalent Mechanical Models of Liquid Sloshing in Spacecraft Container
Optimization on the Structure of Ceramic Nozzles by FLUENT Simulation
The Hinge Moment Optimization of Rudder Base on CFD Numerical Simulation
Effects of Parameters Variation of Fractal Flow Path on the Emitter Hydraulic Performance with Path Analysis
The Numerical Simulation Research on Heat Transfer Enhancement of the Interpolation-Tubular Air Pre-Heater with Semi-Elliptic Cylinder Shell Vortex Generator
Study on Flow Distribution Relationship in Hydraulic System
Study on New Energy-Saving Excavator with Synthetic Positive Flow Control System
Effect of Turbulence Model to Simulation Accuracy of Wind Turbine Blade
Effect of Fracture Parameters on Desorption Properties of Shales
Research the Internal Flow Field of Valve Stem Leakage
Modeling and Analysis of Full Hydraulic Pressure Drive System of the Wheel Loader Based on AMEsim
Numerical Simulation of Laval Nozzle
Numerical Simulation of Shock Wave in Air Based on FCT Method
Numerical Analysis of Aerodynamic Noise in a High Parameter Pressure Reducing Valve
Study of SO2 Detecting Using Non-Dispersive Infrared Based on Gas Filter Correlation Technology
Chapter 4: Dynamic Systems and Analysis, Machinery Dynamics and Dynamic Modelling
Dynamic Modeling and Motion Simulation for Wave Glider
The Prediction and Analysis of Helicopter Rotor Rotation Noise in Hover
Recent Advances in Quasi-Zero-Stiffness Vibration Isolation Systems
Research on Modal Simulation and Experiment of a Radar Active Fixing-Board
The Dynamic Simulation of Vertical Planetary Wheel Sand Reclamation Equipment Based on ADAMS
Simulation Analysis of the Impact on Gasoline Engine Power Performance by Optimizing the Structure of Intake Ports
Analysis & Study on Pneumatic Characteristics of Unidimensional Correction Projectile Based on Resistance Circle
Research on Calculation Method for Polar Moment of Inertia of Spline Shaft
The Dynamic Analyses of the Eccentric Cylinder Moving on the Inclined Plane
Research on Vibration Isolation and Noise Attenuation Properties of Periodic Layered Structures
Dynamic Adjustment Method of Mechanical Press Slide Height Based on Linear Encoder
The Static Analysis of the Parallel Bars of the Crankshaft of a Mini Air Compressor on ANSYS
Study on Dynamics Characteristics of SINS Damping System in Shock Environment
Nonlinear Study of Rotor-AMB System Subject to Multi-Parametric Excitations
Study on Torsion Vibration of Ship's Complex Shaf
Dynamic Model of Automatic Transmission System of Tracked Vehicle
Research on Vibration Responses of Railway Steel Bridge Considering Welding Residual Stress
Numerical Simulation on Flight Dynamic Characteristics of Elastic Wing Based on Gust Response
Study on Balance Simulation of Milling Tool Handle in High Speed Machining
Design and Performance Simulation of a Power-Integrated Transmission Mechanism
Vibratory Stress Relief of Central Air-Conditioning Evaporator
Analysis on Coupling Faults Induced Vibration of Hydropower Unit
Simulation of Roll Stability of a Van in Cross-Wind
The Modal Analysis with Finite Element Method for the Cutting Arm of EBZ160 Roadheader
A Constant Tension Control Device of Mechanical Feedback
Simulation of Heat Stress and Fatigue on Engine Case
Vibration Analysis of Transmission Shafts Using Solid Models
Dynamic Performance Analysis of a Smart Base Isolation System Based on Magnetorheological Elastomers
Analysis on Torsional Stresses in Turbo-Generator Shafts due to Two-Phase Short-Circuit Fault
A Quasi-Green Function Method for Free Vibration of Clamped Orthotropic Parallelogram Thin Plates on Winkler Foundation
Load Distribution of Ball Screw with Contact Angle Variation
A Novel Dynamic Calibration Method for Dynamic Characteristics Testing of Hydrodynamic Journal Bearing
Dynamic Analysis of Less-Teeth Gear Transmission System
Study on the Global Bifurcation of Quasi-Zero-Stiffness System
Binding Force Analysis of Multiple Pairs of Bars Space RCCR Mechanism without Inertia Force
Prediction and Control of 32m Z-Propeller Tug Cabins Vibration and Noise
The Optimal Design and Simulation Analysis of High-Speed Switching Valve Based on Magnetorheological Fluid
Prediction on the Wear Life of Bearings for Planetary Gears
Analysis of Propeller Static Thrust Estimation Method
New Wind Turbine High-Speed Shaft Design and Simulation of Hydraulic Shock Absorbers
Research of Piezoelectric Cantilever Beam Diaphragm Pump
Research and Utilization of Downhole Dynamic Corrosion Test Device
Research on Simulation and Optimization of Dynamic Path Error of NC Machine Tools
Analytical Calculation of Slotless Permanent Magnet Motor Based on Soft Ferrite
Design and Dynamic Analysis of Magnetorheological Shock Absorber Based on the Piezoelectric Technology
Study of Modeling and Simulation on Driving Force Power Steering for Electric Vehicle with In-Wheel-Motor-Drive
Bearing Looseness Fault Characteristics Analysis of Rotor System Based on Incremental Harmonic Balance Method
Study on the Correct of Oil Temperature in Wet DCT Gearshift
LOS Stabilization and Gyro Configuration Analysis for Roll-Pitch Seeker
Design of Midcourse Trajectory for Tactical Ballistic Missile Intercept on the Basis of Zero Effort Miss
Study on Dynamic Simulation of Buffering Mechanism with Liquid Bag
Wave Filtering of Ship Dynamic Positioning System Using Particle Filter
Chapter 5: Advanced Computer-Aided Design and Modelling Technologies in Mechanical Engineering and Mechanisms
Simulation and Study on Ultimate Bearing Capacity of Stretcher Bracket for Aeromedical Evacuation
Modal Analysis and Dynamic Test of Steel Slag Vehicle
Finite Element Analysis for the Working Device of Rough Terrain Forklift
Finite Element Analysis of Assembly Body of Conical Pick
Modal Analysis and Optimization of Tricycle Vehicles Frame Structure
Test Comparison of Damping Effect for Engine Damper Based on Rubber and MR Fluid Damper
The Effect of Vehicles Steering Tilt Angle Impact Human Thorax
Finite Element Modeling and Analysis of Rolling Bearing Based on Explicit Dynamics
Characteristic Parameters of Cushion in High-Speed Train (CRH) Contribute to Seat Pressure Distribution Analysis
Low-Wind-Drag Numerical Research on Fenders and Wheels of Car Model
Research on the Simulation Method of the Belt Conveyor Correction Device
Concurrent Engineering in the Application of Automobile Covering Parts Mould Development
Simulation of Luffing Mechanism of Lemniscate Type Crane with Boom Driving
Method for Lumped Parameter Simulation of Digital Displacement Pumps/Motors Based on CFD
The Research on Vibration Analysis of Blow-Down Wind Tunnel Pressure Regulating Valves
The System Design and Parameterized Modeling of Juice Extractor Screw
Numerical Simulation to the Process of Damage Evolution of Defect Cartilage
Finite Element Analysis of the Cylindrical Helical Torsional Spring
Study on the Three Degrees of Freedom Model of Leaf Spring
The Numerical Simulation Research of Three Dimensional Irregular Wave Based on Wave Spectrum
Research of the Virtual Prototype of the Balanced Elliptical Motion Shale Shaker
The Analytical Modeling and Finite Element Analysis of a Bridge-Type Displacement Amplifier
Based on NX NASTRAN Finite Element Analysis of Rotary Blade Axis
The Establishing and Structural Analysis for Torque Shaft of the Shearer Based on Inventor and Algor
Chapter 6: System Analysis and Industrial Engineering
The Green Mining Construction and Management of Daanshan Coal Mine in Western Beijing
Evaluation on Methods of Spatial Dependence Test
Review of Human Factors in Maritime System
Empirical Research on the Rapid Growth of China's ODI: Based on Multinational Panel Data
A Study about Energy Consumption and Economic Growth in Qinghai Based on the Co-Integration Analysis
Hazardous Materials Transportation by Road: Fuzzy-Theory-Based Routing Design
Researching on the Mode of Selecting Key Village in Administrative Villages
Chapter 6: System Analysis and Industrial Engineering
Selecting Key Village by Quantitative and Qualitative Methods
"Embedding" Updating Strategy Research of Urban Historic District - Taking South Historical District of Nanjing as Example
Construction Research on the Green Hydropower of Houziyan Hydropower Station
The Quantitative Analysis about the Impact on Transport Demands by the Industrial Structure
Tail Dependence Structure between Carbon Emission Allowances Returns Based on Copulas
Feasibility Analysis of and Recommendations for Establishment of a Greenhouse Gas Emission Reporting System on China's Industrial Enterprises
A Research on the Systematic Structure of Green Manufacturing and some Major Problems in its Implementation
Optimization Scheme Selection on Bamboo-Wood Pallet Technological Process
Intrinsically 3-Linked Graph with Knotted Components
The New Method Exploration and Research on Product Carbon Footprint Calculation
Performance Evaluation of Vehicle Electronic Stability Program Based on Psychological Method
Equivalence of Transducer
Theoretical Analysis of a Acoupled Fiber Ring Resonator
Chapter 7: Innovative Design Methodology and Product Design
Bionics Design of Stubble Blade Based on the Digging Claw of Mole Cricket
Orthogonal Testing Optimum Design in Radial Electrodynamic Magnetic Bearings
A Conceptual Model of Flapping-Wing Mechanism Inspired from the Results of Numerical Study
Research on Modern Product Design Method and Procedure Based on the Concept of Full Life Cycle
Research on Product Design Based on the Effect Factor of Product Whole Life Cycle
A Product Concept Method for Industrial Design Based on Basic-Element Model
Research on the Parametric Design of Simple Sofa with RhinoScript
The Design of Finite Element Application Framework Based Design Patterns
Visual Perceptions of Materials in Emotional User Experience Design
Optimal Design of Gears by Means of Genetic Algorithm and Neural Network
A Designing Method of Variable Topology-Transformable Spacecraft
Research on Formulation Method of Urban Modal Driving Cycles of Regenerative Braking
Self-Adapting Function Principle and Creative Design of BFT Type
Design of Porous Restriction Aerostatic Guideway for Form Measuring Instrument
An Evaluation System of Maintainability of the Civil Aircraft Based on Virtual Reality
New Methods of Reliability Engineering
Modeling Present Worth of Product Quality Loss of STB Characteristic Based on Service Life Distribution
Exploration on the Packaging Designs Idea of Motion in Quiescence
The Life Cycle Management and Evaluation of Equipment Maintenance Quality
Artistic Techniques for Developing Creativity in Design
Research on Multiple Environment over Stress Testing
A New Piezoelectric Generator Based on Stairs
Sustainable Innovation Design for Buckle Ring Machine of Button Battery
An Analysis of Product Design Based on Traditional Chinese Culture
Digital Design of Automotive Wire-Harness
Innovative Design of Injection Mold Based on Design around Patent
Study on the Application of the Unisex Design Element in Menswear Design
Strategies for the Design of Ice and Snow Landscape of Urban Residential District in the Cold Regions
Higher Dimension Modules Incurred Mechanism Structure Variation
Study on the Design of Outdoor Furniture Made of Recombinant Bamboo
Study on the Relationships between New Paper Surface Efficiency and Printing Quality Parameters
Working Principle and Mechanics Analysis of Circular Bundling Machine
A Design of Ginkgo Cleaner
The Reformation Design of the Qidashan Semi-Mobile Crusher Station
Research on Technologies of Green Design and Manufactuirng for Toys Design
Design of Single Star Simulator Based on LED Light Source
Design of pH Meter Based on msp430
Research on Methodology of Module Division in Fractionated Spacecraft
Simulation with Aspen Plus and Performance Analysis of LT-MED Seawater Desalination System
Structural Design and Parameters Optimization of Rice Seed-Metering Device
Product Module Division Method Based Degree of Modularity
Manufacture of an Unmanned Aerial Vehicle (UAV) for Advanced Project Design Using 3D Printing Technology
A Novel RFID-Based Thermal Convection Type Inclinometer with Non-Floating Structure and Hemi-Cylindrical Chamber
Chapter 8: Intelligent Optimization Design and Reverse Engineering
Transmission Ratio Optimization of Electric Vehicle Powertrain
Measurement Technique Based on the Three-Dimensional White-Light Scanner
Motor Shell Temperature Prediction Based on ARIMA
Research on Enable Advanced Technologies for Swarm Construction
ADACD-Based Novel Optimal Model Identification Scheme for MIMO Discrete Nonlinear Systems
The Study of Induction Setter Based on Low Density Parity Check Coding Method
Correction of the Asymmetrical Projection for Accurate Camera Calibration Using Co-Planar Circular Feature
Enhanced Two-Point Exponential Approximation for Structural Optimization
Hardware Design of the Agricultural Greenhouse Internet of Things Monitor Terminal
Research on Genetic Algorithm in Mold Optimization Design
Optimization Design Study of Loader Working Mechanism Based on MATLAB Complex Method
Prediction of the Metro Section Passenger Flow Based on Time-Space Characteristic
The Optimization of Piston Groove Diameter Based on ABAQUS
Research on Object-Oriented System Model Based on Feature
Analysis on Knowledge Sharing Risks in Knowledge Chain Based on Matter-Element
Quantitative Analysis of the Defect Dimension for Fracture Surface of Fracture Splitting Connecting Rod
Boiler Combustion Control System Optimization Strategy
Research on the Discretization of STL Model in the CNC Incremental Forming
Research on Assembly Optimization of Hull Section Based on the Genetic Algorithms
Risk Analysis on Grain Quality in the Drying Process
Highly Anti-Noise and Adaptive B-Spline Curve Reconstruction Based on ICT Slice Images
Application of Reverse Design in Wine Packaging Container Design
B-Spline Curve Approximation Using Feature Points
The Research of Adaptive Robust Predictive Current Control Algorithm of Permanent Magnet Synchronous Motors
Load Prediction of RBF Neural Network Considering Weather Factors
Several Non-Rearranged Dynamic Multicast Routing Algorithms
Reactive Power Compensation of Oilfield Distribution Systems Based on Tabu Search Algorithm
Parallel Ant Colony Algorithm Based on Award-Punishment Mechanism and its Application on Wireless Sensor Network Routing
Research on Re-Use Reverse Logistics Network of Disused Electric Appliances Based on Election Campaign Algorithm
Optimal Design of CNC Crushing Machine Steady Based on Genetic Algorithm
Study on Common Fault of Wind Turbine
Application of an Improved Internal Model Controller Based on the Particle Swarm Optimization in Network Control System
Fault Knowledge Acquisition of Electronic Equipment
A Nearly Optimal Peak Reduction Tone Set Selection Algorithm
Chapter 9: Mechatronics, Automation and Control, Detection Technologies
Adaptive Sliding Mode Control of the Linear Drive System
Adaptive Control for Aircraft Anti-Skid Braking System
Research on Intelligent Control System of High Speed and High Precision Filling Disc Machine
Study of Topology and Control Strategy of the Bidirectional Energy Storage Converter Based on Three-Level
Testing System of Needle Selectors for Jacquard Knitting Machines
Study of Topology and Control Strategy of the Novel Bi-Directional Lithium Battery Charger
Drive Control of a Class of Scan Systems
Research on Reliability of Electromechanical System Based on the Competition Mode
Developing and Research on Open Motion Controller Based on PC
Systematic Design of Electronic Steering Wheel in Steer-by-Wire of Engineering Vehicle
Developing and Research on Liquid Level Control System of Double-Tank
Rapid Prototyping Design for In-Wheel Motor Controller
The Influence of Pole-Slot Match on Magnetomotive Force with Concentrated Fractional-Slot Winding
Research on Integrated Control System of the Gas Pressure in Coke Oven
Progress in Research for Pipe Inner Diameter Detection Technology Based on Laser
Step Motor Control Based on FPGA
Research on the New Type of 12kV Inflatable Vacuum Circuit Breaker
Research on Fuzzy Control in Vacuum Heat Treatment Furnace Temperature Control System
Modeling and Simulation of Vector Control System for Asynchronous Motor
Optimization of the Hydraulic Control System Utilizing BP Neural Network Control Strategy Based on Genetic Algorithm
Design and Implementation of Vehicle Attitude Detection and 3D Dynamic Display System
Electromechanical Actuator Control System Development Using Rapid Prototyping Method
Study on Temperature Control System of Film Laminating Machine
Automation Control System of Pharmaceutical Factory Based on Wireless Sensor Network
Synchronization of a New Fractional Order Hyperchaotic System with Activation Feedback Control
Bearing Condition Recognition Based on Kernel Principal Component Analysis and Genetic Programming
Design and Simulation of the Self-Tune Fuzzy Logic PID Controller for VAV Air Condition System
Design of Intelligent Home Control System Based on a Variety of Network
The Optimization of the PID Controller Using the Least Squares Method and the Improved Lbest PSO Algorithm
Research on Fuzzy PID Control for Power-Train MR Mount System
Adaptive Levitation Control Based on Feedback Linearization
The Design for the Hardware of Analog Controlling Module
Design of Temperature Control System in Incubator
A Simple SOM Neural Network Based Fault Detection Model for Fault Diagnosis of Rolling Bearings
Study on Optimization Control Method of the Pickling Process
Data-Based Research on Predictive Control of Multiple Mismatched Model Parameters
The Study of Fuzzy Control Algorithm in a Duct Active Noise Control System
Output Feedback Control for a Class of Uncertain Fuzzy System by Controller Switching
Finite-Time Chaos Control of Lorenz Chaotic System Based on the Passive Control Teachnique
Vehicle Stability Analyse with Electronic Power Steering Based on Yaw Rate Feedback
Strapdown Optical Seeker Guidance Instructions Extraction and System Stability
A New PLS and Bayesian Classification Based On-Line Outlier Detection Method
Path Following Control of a Mobile Robot Using Contractive Model Predictive Control
Model Free Control of the Refrigeration System Based on Minimum Stable Superheat
Research on Pantograph Active Control Strategy for Reducing the Pantograph-Catenary Wear
Analysis of DAS and ATWS Mitigation System in Nuclear Power Plant
The Parameter of Fuzzy Self-Tuning PID Controller Realized Based on VHDL
Chapter 9: Mechatronics, Automation and Control, Detection Technologies
The Research of Permanent Magnet Synchronous Motor Predictive Current Control Algorithm
Control Strategy of PMSG in Variable Speed Wind Power System
The Study of Detection System of Two-Wire Flowmeter Based on Virtual Instrument Technology
Study on Mechanical Braking System Development Method and Validation for Electric Vehicles
Real-Time Auto-Light System for High-Speed Camera
A Power-Control-Based WSN Boundary Detection Algorithm for Agricultural Environment Mornitoring
Modeling and Control with Hysteresis of Piezoelectric Smart Materials Actuators
An Energy-Saving Control System to Street Lamp Based on Sensor Networks
Fault-Tolerant Control System Design of UAV Based on Dissimilar Redundancy
Intelligent Control of a Cart and Pole System
Design Higher Order Sliding Mode Controller for a Class of SISO Uncertain Nonlinear System
Design and Implementation of Fall Detection System Based on ZigBee
Chapter 10: Industrial Robotics and Machine Vision, Navigation and GPS Technology
A Method of Line Structured Light Vision System Calibration Based on Stereo Vision
Steps and Stairs-Climbing Capability Analysis of Six-Tracks Robot with Four Swing Arms
Design of Automatic Tracking System Based on FPGA and Binocular Vision
The Design of the Intelligent EOD Manipulator with Five DOF
Robust Adaptive Control for Robotic Manipulators Based on RBFNN
Development of Quality Detecting System for Micro Holes by ECM Based on Machine Vision Technology
Robotic Curve-Shaped Seam Tracking System Using Vision Sensor
Fuzzy Control for Underactuated Manipulator
A Novel Texture Spectrum Descriptor
True Color Image Enhanced by Wavelet Illumination-Reflection Model
An Algorithm to Transform Tolerance-Control Solutions of Interval Linear Equations
Design of Multi-Stage Optimal Arbitrary Time-Delay Filter
Forward Position Analysis and Error Modeling of the 2UPS-RPU Parallel Manipulator
Application of Image Processing Technology in Welds Ultrasonic Testing
A New Automatic Focusing Algorithm and its Application on Vision Measuring Machine
Adjacency Matrix Based Analysis on a Novel Metamorphic Manual Operation Sugarcane Loader
Design and Topological Analysis of a New Manual Operation Sugarcane Loader with Metamorphic Function
Desalinization Water Treatment Control System Design Based on Mitsubishi PLC
Design and Analysis of a Micro-Motion Platform Based on Flexible Mechanism
Binocular Stereo Vision Calibration System Implementation of Grid Strain Measurement in Sheet Forming
Modelling and Simulation of Forward Kinematics for Planar 3-DOF Parallel Robot Based on Simulink
Study on Dynamic Characteristics of Parallel Robot with 2-DOF
Build for Motion Control System of Planar Five-Bar Parallel Mechanism
The Structural Design and Kinematic Analysis of Palletizing Robot
The Control of Fuel System for Combustion Piston Type Hopping Robot
Obstacle Performance of Track Robot with Passive Rocker Based on Recurdyn
The Design of Stereo Vision Autonomic Navigation Robot Based on SOC
Ferrying Performance Analysis of a New Type All-Terrain Tracked Water Carrier
Neural Network Aided GPS/INS Integration for UAV Navigation
Research on Precise Positioning Technology of Mine Locomotive Unmanned Systems
An Improved Adaptive Algorithm for INS/GPS System
An Optimizing Evaluation of Estimation Algorithm about the Fault Detection and Exclusion in the WAAS
Chapter 11: Sensor Technologies
Design and Analysis of a New Electrode for Micro-Structure Gas Sensor
The Model Used to Pretect Wetlands Based on Zigbee Technology
Design and Analysis of a Low-Range Torque Sensor
Design of the Angular Displacement Sensor Based on Magnetoresistive Technology
Design of Large-Stroke Linear Displacement Sensor with High-Precision Based on SS495A1 Technology
Research on Modulation Multiplexing System and Technique Employing Tilted Grating
Chapter 12: Measurement and Monitoring Technologies
Design of Multiple Bus Configuration Monitoring System Based on OPC Technology
Study on Monitoring and Control System of Vehicle-Mounted Rig Based on CAN Bus
A Size-Shifting Measuring Method for Multi-Diameter Shaft Grinding
The Research on Overpass Water Depth Monitoring Sandbox Based on Internet of Things
Development and Application of Die Swell Data Gathering System Based on Multi-Function and all-Electric Rheometer
Design and Implementation of Large Computer Room Environment Intelligent Monitoring System Based on Zigbee
Research on the Measurement Error of Portable Braking Performance Tester
Evaluation of Equipment Comfort in Data Centers by Fuzzy Logic
Measuring Method for the Signal Distortion of Axial Thrust and Mechanical Vibration Platform
An Improved Algorithm Based on Incremental Insertion in Delaunay Triangulation
The Calibration of Binocular Stereo Measurement System Based on a Coded Model
Development of Motor and Controller's Engineering Measurement System
Research on Highway Early Age Freezing Information Collection System
A Depth Measurement Method Using Two Structured Light Binary Patterns
The Principle and Calibration of the Third Gear Flow-Meter
Design on Monitoring System of Fire Disaster Based on Zigbee CC2530
Sensing Characteristics of Sampled Fiber Bragg Grating about Temperature and Strain
A Novel Integrated Portable Elasticity Measurement System
An Optical Centrifugal-and-Pneumatic Controlled Microfluidic System for Sensing Real-Time Biochemical Reactions
A Novel Alignment Method for Collimator Based on Laser Differential Confocal Technique
Design and Implementation of Gas Detector Position Computer System Based on ARM
Measuring Routine Parameters of Wine by ATR-MIR Spectroscopy
The Design and Implementation of Monitoring System of Flue-Cured Tobacco Barn Based on ARM7
Development of Timing Component for Angular Distortion Measurement System
Application of Multithreading Technology in the Real-Time Measurement System
Thermal Characteristics of High-Power LED Packages with Dissipation Film
A STEP-NC Compatible on-Machine Measurement System with Automated Correlation of Inspection Data
Chapter 13: Power, Energy, Microelectronic Technology and Embedded System
Research of Bearing Raceway Ultra-Lapping Unmanned Manufacturing System Based on Embedded Technology
Design of Remote Control Equipment Based on Industrial Ethernet
New Bank Electronic Combination Lock System
Characteristics Analysis and Simulation Testing on Modular Multilevel Converter VSC-HVDC Based on RTDS
Three Carrier PWM Control of Improved Z-Source Inverter
Research on Dual PWM Converter for VSCF Brushless Doubly-Fed Wind Power Generator
Development of Back-to-Back Flexible HVDC Prototype Based on MMC
A Review of Applying Customer Power Technology to Improve Transient Power Quality
Design and Application of High-Power LED Drive and Control Circuits
Study on AES and its Efficient Implementation on STM32F103 Processor
Design of Remote Control System for Smart Home Based on Z-Wave
Random Yield Model in Integrated Circuit Design
Design of a K Band MEMS Switch with CPW Defected Ground Structure
Design of Sampled Fiber Bragg Grating Comb Filter
A New Microprocessor Protection Scheme Based on Digital Signal Processor
Modeling and Simulation of the Auxiliary Power System in Extended Range Electric Vehicle
Research on Grid-Connected Photovoltaic Generation System Based on Novel MPPT
Study of a Multi Objective Reactive Power Compensation Device Considering Fault Current Limiting
Evaluation of Silicon Nitride MIM Capacitors for MMIC Applications
A Novel Pilot Protection for HVDC Transmission Lines Based on Model Error Function
The Optimization of Power Smoothing Control Strategy for Wind Farm Based on Flywheel Energy Storage Device
Compact DC-DC Power Design in Half-Bridge IGBT Driver
ATP Simulation Hybrid Electrode Capacitor Self-Healing Circuit
Research on Smart Meter BOA and System Design
The Simulation of APF Based on Three-Phase VSI
The Research and Application of Reactive Compensation Technology for Oilfield 10kV Lines
Design of GTAW Wire Feeder Control System Based on Nios II
Ultralow-Repetition-Rate High-Energy Square Wave Pulse Amplification System for the Brillouin Optical Fiber Sensing System
Application of Wireless Communication in Multi-Channel Temperature Control System
Investigating the Impact of Hybrid Energy Storage System on Isolated Power System
AC Excitation and Speed Governing Coordination Control of Impulse Hydroelectric Generating Unit and its Simulation
The Influence of Exciting Inrush Current of Transformer Differential Protection
Chapter 14: Communication Technology, WEB and Network Engineering
GSEP: an E-Mail Protocol Based on Generalized Signcryption
Low-Rate Application-Layer DDoS Attacks Detection by Principal Component Analysis (PCA) through User Browsing Behavior
A Dynamic Trust Evaluation Model for Internet Computing
A Dynamic Cell Range Expansion for LTE-Advanced Heterogeneous Networks
Dynamic Output Feedback H Controller Design in Multiple-Packet Transmission with Limited Communication
Stabilization for Networked Control Systems with Limited Communication
The Design of Dual Band Circularly Polarized Patch Antenna for Civilian GPS Applications
An Adaptive Web Information Extraction Approach Based on STU-DOM Tree
Enhanced Power Allocation and Relay Selection Scheme in Two-Way Relaying Cognitive Radio Networks
Performance Analysis of Uniform Fiber Bragg Grating
A New Measurement Method of Conducted EMI on the Power-Line Communications Channel
Traffic Prediction Based on Grey Model Optimized by Buffer Operator and PSO in Communication Network for Electric Power
Cryptanalysis and Improvement of a Strong Designated-Verifier Proxy Signature Scheme
Research on the Technology of Low-Voltage Power Line Carrier-Current Communication Based on OFDM
The Discussion on Communication Simulation Methods
Improved Binary Tree Search Anti-Collision Algorithm
Research on Digital I/O Modules Based on Bluetooth Communication
FPGA Implementation of a Novel Multi-Rate QC-LDPC Encoder for DTMB Standard
All-Optical Wavelength Conversion Based on XPM in HNLF
A Secret Sharing Algorithm Based on Regenerating Codes
A Mental Clustering Algorithm Based on the Embedded Agent in Wireless Sensor Network
A Polling Control Protocol with Energy-Saving for Wireless Sensor Network
RSSI Based Monte-Carlo Localization Boxed Algorithm
The Design of MMS and SMS Student Service System Based on PC
Design and Actualization of Intrinsically Safe Voice Warning System for Mine
Research of Selective and Incremental Information Fusion Method Based on Bayesian Network
Investigation of the Impact of BIM&IPD on Change Orders Using Bayesian Network Method
Study on the Deposition Methods of Institutional Repositories Based on Sword Protocol
Chapter 14: Communication Technology, WEB and Network Engineering
Active Queue Management Based on State Variable Feedback Control
Synchronization of Two Different Complex Dynamical Networks with Interconnection
The Research and Application of Simulation Learning Tool
The Design and Research of Virtualization Platform
Chapter 15: Signal and Intelligent Image, Video Information Processing, Data Mining
Study of Selective Video Encryption for the H.264 Standard
Gear Incipient Diagnosing Based on EEMD and Genetic-Support Vector Machine
Partial Discharge Identification Using Multiple Features Fusion Based on Evidence Theory and Support Vector Machine
An Application of the Frequency-Domain Experience Mode Decomposition to Enhance Deconvolution Results
A New Algorithm of Weld Seam Detection Based on Mathematical Morphology
Random Phase Weak Sine Signal Detection Based on Autocorrelation and Chaos Theory
Non-Invasive Image Processing Method for Detecting Seed Vigor
A Data Recorder with Optimized Recording Algorithm Used in UAV
Improved Elastic Model Matching Algorithm for Facial Expression Recognition
Tunnel Face Image Segmentation Optimization
A Research Review of Hilbert-Huang Transform Used for Rolling Bearing Fault Diagnosis
Method to Estimate and Promote SNR of Covariance Matrix in Array Signal Processing
Analysis of Pipeline Dynamic Flow Signal Coupling in Hydraulic System
Compressed Sensing with Generalized Hebbian Algorithm in Video Frame Prediction
Underwater Image Transition Region Extraction and Segmentation Based on SVM
Research on Data Processing Method for Continuously-Varying Dynamic Pressure Flutter Test
The Frequency-Domain Analysis of the Rheological Data Acquired with Multi-Function and All-Electric Rheometer
P300 Oddball Task and Classification Based on Support Vector Machine for BCI System
The Methodology Analysis of Traffic Volume Data Processing of Regional Road Network Based on Bi-Level Programming Models
Image Acquisition Method Based on TMS320DM642
Design and Implementation of a New Type of Underwater Acoustic Target Simulator
A New Method of Fundus Image Enhancement Based on Rough Set and Wavelet Transform
Research on Sound Source Localization System Based on Time Delay Estimation
Ultrasonic Testing Signal Denoising Based on Matching Pursuits
Analysis about Coordinate of Cepstrum and its Application in Gearbox Fault Diagnosis
An Overview of Moving Target Abnormity Behavior Identity Technology in Video Sequence
Freeway Traffic Congestion Identification Based on Fuzzy Logic Inference
Real-Time Boundary Detection of Fast Moving Object in Dark Surrounds
Image Denoising in Frequency Domain Based on Analogical Basis Deconstruction
Speech Stream Detection for Noisy Environments Based on Empirical Mode Decomposition
Web-Based Media Asset Management System Design
Defective 2D Barcode Image Mosaic Method for Rotary Scanning Serial Image
Image Pro-Correction for Defocus Blur Image Based on Wiener Filtering
A Signal Detection Method for Harmonic Signal Submerged in Complex Noise Background
Research of the Disguise Identity Based on EEG
The MATLAB Realization of Toning up Digital Image Based on Wavelet Transform
The Research on Data Acquisition Subsystem for Aluminum Reduction Cells under Reconstruction
Improvement Hardware Design of High Power and Ultra-Low Frequency Signal Source in Cased Hole Resitivity Logging
Simulation Analysis Based on Finite-Difference Time-Domain Algorithm for GIS Partial Discharge Detection
A PAPR Reduction Method for Hexagonal Constellation-Based OFDM Signals
Based on k-Medoids and c5.0 Joint Constraint of the Drug Information Mining Algorithm
Research on Asset Recognition Algorithm of Information Security Product Based on Decision Tree Algorithm
A Dynamic Sliding Window Based on Otsu Method for Binary License Plate and Character Recognition
Extraction Research about Parallelization of Named Entity Based on Hadoop Platform
Trademark Recognition Based on Hu Modified Invariant Moments
Fast Tone Mapping Based on Sorting
Research on Online Visual Inspection System for Multi-Feature Trademark Defect
The Analysis and Data Mining of Students' Online Data Based on Digital Campus
Cyclic Relation Method for DOA and Polarization Parameters Estimation of Arbitrary Polarized Array
Research on Maize Varieties Recognition System Based on Image Processing
Medical Bottle Tightness Detection Based on Digital Image Processing
Chapter 16: Software Development and Application
The Data Manipulation Platform of Well-Logging Information Based on Agent
Research and Realization of the Software Requirements Management Integration Platform
Research on the Embedded Software Reliability Evaluation Model Based on Influence Factors
An Access Control Model for XML Repositories
Application of Weight Adjustment Technique in the Deep Web Data Source Classification
Research for College Counselors' Work Auxiliary System Based on B/S Architecture
Applying MPC08SP Motion Control Card to the Development of Open CNC System of Grooving Machines
Research and Application of Music Digitalization Based on MATLAB
Integration of Systematic RBAC Security Model and UML Model
Research on the Digital Earth Based on OpenGL
Research on Feature Based IC Process Modeling and Clustering
Optimal Route Retrieval Model Based on Assignment Strategy
U Nong Shu Cai Tong System - The Agricultural Expert System Based on U Disk
Chapter 17: Computer Applications and Information Technologies in Industry and Engineering
The Construction of Psychology Lessons Planning Platform Based on the SSH
A Simple Three-Dimensional Terrain Modeling Method for Complex Terrain Wind Environment Simulation
Analysis of the Data Mining Application Based on Cloud Computing
The Design of Universities Resource-Sharing Network Teaching System Based on Cloud Computing
Early-Warning Model for TECC Based on Gray Neural Network - Taking Laolongtou Scenic Area as an Example
The Research on Vehicle Routing Problem Based on Improved Ant Colony Algorithm
Digital Earth and Exploration of Military Application
Finding the Good in Health Care System Based on Iteration Model
Research on Spatial Cognition Training Based on the Digital Earth
Effectiveness Calculation of Multiple Rounds Simultaneous Impact Shooting Method Based on Monte Carlo Method
Detection for Approximately Duplicate Records Based on Fuzzy Comprehensive Evaluation
Research on Cooperation Mechanism of Multi-Agent Grinding Control System Based on Blackboard Model
Research of the Integration Model of Coal Heterogeneous Systems
Minimum Normal Cone for Continuous Collision Detection
A Design of Ubiquitous Learning Environment with the Support of Pervasive Computing
Transformation Formulas between Be zier Curve and Partial said-Ball Curve
Research on General Data Publish/Subscribe Model Based on DDS
A Research on Sports Training Auxiliary System Based on Cloud Computing
The Service Platform for Barrier-Free Special Education Based on Cloud Computing
Construction of Drought Indices from Passive Microwave Remote Sensing AMSR-E Data in Huaihe River Basin
Quantitative Assessment of Expert's Lifting-Thrusting Manipulation in Acupuncture Based on Haptic Device
Emergency Scheduling Model of Urban Rail Transit Based on Genetic Algorithm
The Application of Decision Tree in Security Audit
Some New Generalized Nonlinear Difference Inequalities and their Application
Minimum Spanning Tree Dynamic Demonstration System Implementation
Calculation of Slope Safety Coefficient Based on Newton's Iteration
Analysis and Improvement of BLP Model for Multi-Level Security Database
A Constellation Graph Based Approach for Ontology Construction
Chapter 18: Production and Operation Management, Supply Chain, Electronic E-Commerce and Internet of Things Application
Integrating Modular Units into the Production Line and MRO in Career Apparel Industry
The Limit Price Strategy Analysis of Integrated Medicine Supply Chain Based on Government Regulation
Research on Network Learning Mechanism of Enterprise Network Resource Coordination
Developing the Coal and Power Pool Project, Structuring Large-Scale Coal Enterprises
The Establishment of Production Capacity Evaluation Indicator System Based on R-Cluster and Coefficient of Variation
An Ant Colony Algorithm for Integrating Assembly Sequence Planning and Assembly Line Balancing
The Economics and Feasibility of Traceability in Agri-Food Supply Chain: Analysis with Game Theory between Double Oligarchs
Study the on Time Delivery Based on Product Lifecycle Management in Supply Chain
The Study of Buffer Allocation with Travel Time in Stochastic Production Flow Line
The Effects of Demand Randomness in Newsvendor Model
Study on Multi-Objective Optimizing Model of Cigarette Production Line
A Study on Malaysian Food and Beverage Manufacturing SMEs Practices of Pre-Development Process
Design and Application of Project Management System for Project-Driven Equipment Manufacturing Enterprise
Study on the Intra-Ship Material Handling System
Logistics Simulation and Optimization Design of One Production Line Based on Flexsim
Key Factor Extraction of Supply Chain Performance Based on Heterogeneous Selective Ensemble PCA
The Optimization Research on the Green Supply Chain Network
Study and Application of Supplier Performance Evaluation System Based on the Triple-A Supply Chain
A Cross-Layer Congestion Control Algorithm Based on Traffic Prediction in Wireless Sensor Networks
Research on the Feasibility of Express Freight Transport on High-Speed Railway in China
Research on Separating Mode of Business and Logistics
Research on Mining of E-Procurement Model Parameters Based on Decision Tree
Agile Supply Chain Performance Evaluation of Automobile Manufacturing Based on Regression Analysis
The Entropy Weight Fuzzy Comprehensive Evaluation of Green Logistics Cost Management
Model Innovation of Exhibition Logistic Supply Chain
Study on the Development Strategy of Lean Logistics for Automobile Enterprises under Green Supply Chain Environment
Customer Satisfaction Evaluation of Ceramic E-Commerce Platform
Commodity Coding Research and Application of Ceramic E-Commerce Platform
Study on Railway Materials Procurement Online
Study on Railway Passenger Service Based on Customer Perception
Chapter 19: Management and Education Engineering
Study on Virtual Reality Techniques Used in German Teaching
Research and Practice on Data Analysis Evaluation Technique of Intelligent Teaching-Management Based on D-M Theory
Research on Group Decision Making Model of Low-Speed Pure Electric Vehicle's Technology Integrated Innovation
Creation and Practice of Teaching System on Engineering Training for Training Distinguished Engineers
Social Impact Assessment of AMT Project Based on the Information Entroy Theory
"Forgettingness" Parameter as a Criterion for Assessing the Quality of Teaching Physics to Future Engineers
Research on E-Commerce Teaching System
Analysis of Development of Real Estate Industry Based on FA and CA
Open Experimental Teaching in Fluid Mechanics
Teaching Reform and Thinking of the Course Electro-Mechanical Systems Dynamics Based on Higher Engineering Education Mode
by "Nielsen BookData"
