Materials, transportation and environmental engineering : selected, peer reviewed papers from the 2013 International Conference on Materials, Transportation and Environmental Engineering (CMTEE 2013), August 21-23, 2013, Taichung, Taiwan
Author(s)
Bibliographic Information
Materials, transportation and environmental engineering : selected, peer reviewed papers from the 2013 International Conference on Materials, Transportation and Environmental Engineering (CMTEE 2013), August 21-23, 2013, Taichung, Taiwan
（Advanced materials research, v. 779-780）
Trans Tech Publications, c2013
- : [set]
- Part 1
- Part 2
Available at / 1 libraries
-
Tokyo Institute of Technology Ookayama Library
Part 1A25118/779-1400063540,
Part 2A25118/779-2400063559 -
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the 2013 International Conference on Materials, Transportation and Environmental Engineering (CMTEE 2013), August 21-23, 2013, Taichung, Taiwan.
The 358 papers are grouped as follows:
Chapter 1: Materials Science and Engineering, Material Forming and Processing, Applied Mechanics;
Chapter 2: Traffic and Transportation Engineering, Civil and Mechanical Engineering;
Chapter 3: Environmental and Energy Engineering, Sustainable and Green Industry, Geo-engineering Applications;
Chapter 4: Data Processing and Information Technologies, Computer Methods, Management, Logistics and Network Applications.
Table of Contents
Preface, Committees and Sponsors
Chapter 1: Materials Science and Engineering, Material Forming and Processing, Applied Mechanics
Effect of Excess Li2CO3 Addition on the Physical and Electrical Properties of Lead-Free Bi0.5(Na0.82K0.18)0.5TiO3 Ceramics
Effect of Nanosilicon Dioxide on Structure and Properties of Poly(Vinyl Alcohol)/ Sodium Carboxymethylcellulose Blending Film
Determination of Trace Mercury in the Titanium Dioxide by Ultrasonic Oscillation - The Suspension Solid Sampling GF-AAS
Compare of Impregnating Poplar with UF and PF Resin
Elimination of EDTA in Aqueous Solution by Bimetallic Fe-Cu Process
The Research of Models for TKY Tubular Joint Welds in Ultrasonic Phased Array Inspection
Bulk Nanocrystalline Al 7050 Prepared via Cryomilling
Application of Thermoregulation Materials in Clothing Materials
Performance of the Glass-Ceramic Coating Prepared by Slurry Spraying Technique
The Possibility of Using Oxide Cathode Materials of Spent Lithium-Ion Power Batteries for Carbon Dioxide Capture from Fossil Fuel Plant
High Temperature CO2 Capture by Regenerable Calcium Aluminates Carbonates Sorbents
The Development Trend of New Garment Materials and the Application of Compounding Technology
Special Wetting Behaviors on Canna Leaf and its Dependence with Microstructures
Comprehensive Evaluation on Energy-saving Window Material Based on Weighted TOPSIS
Metal Corrosion of Ballast Tank Caused by Electrolytically Treated Ballast Water
Effects of Casting Temperature and RE Refiner on Microstructure of the Squeeze-Cast Al-Zn-Mg-Cu Alloy Drive Hollow Shaft
Study on Tension Model of Running Deviation for Strip Rolling
High Performance Ferrocement Laminate Strengthening Technology
Study on Slag Corrosion of the Magnesia Lining during Ferrovanadium Smelting Process
Study the Ferro-Surface Tension on Magnetization Degree of Ferrofluid
Hot Compression Deformation Behavior of AZ41M Magnesium Alloy
Measurement of Radiation Heat Transfer within Porous Material
Study on Preparation of the High-Density Ammonium Polyvanadate
Shrinkage Performance of Lime-Fly Ash Stabilized Crushed Stone
Study on Compressive Stress-Strain Relationship of Polymer-Modified Concrete
Study on Fracture Behavior of Steel Strip under Cold Rolling Forming Process Based on GTN Damage Model
The Research of Center Shaft Bracket Stamping Simulation Technology Based on Dynaform
Effect of Pullulan, Glycerol Blend on the Properties of Gelatin Based Edible Film
Method to Determine Asphalt Film Thickness Based on Actual Measurement
Research on Properties of Recycled Coarse Aggregate
Optimized Design of Plant-Mixed Recycled Materials with High Blending Ratio of RAP
Kinetics and Thermodynamics Studies of Prodigiosin Dyeing on Polyester
Hardness Test and Error Analysis of N80 Oil Casing
Effect of Hydrogen Partial Pressure on Hydrocarbon Production from Deoxygenation of Stearic Acid
Preparation and Properties of Wood Flour/HDPE Composites Using C5-g-MAH as Compatilizer
Preparation of Poly (dimethyl Diallyl Ammonium Chloride - Acrylamide) via Inverse Microemulsion Polymerization Process
Study of High-Density Zn-Doped Tungsten Trioxide Ceramic Targets
Properties and Application of Semi-Flexible Material in Highway Engineering
Molecular Cloning and Expression of -1,4-endoxylanase Gene from Chaetomium cupreum in Yeast Saccharomyces cerevisiae
Human Metallothionein Enhanced Tolerance and Biosorption of Cadmium when Expressed in Saccharomyces cerevisiae
Synthesis and Characterization of Mesoporous Molecular Sieve Al-MCM-41 Using Kaolin as Raw Material
Influence of Heat Treatment on Corrosive Property of 5083 Aluminum Alloy
Study on Gradation Fractal Cartesian Coordinate System of Asphalt Mixture
Analysis of Crack Resistance for Hybrid Fiber Mortar
The Reinforcement Research on Assemble Steel Truss Bridge
Preparation and Characterization of Poly(L-Lactide-Co- -Caprolactone) Copolymer for Food Packaging Application
Construction of Genome Library for the Toxic Gene of Alexandium minutum
Novel Structures and Properties of Ni Nanowires
The Measurement of Composite Property Based on Bayes Formula
Low Temperature Synthesis of Nanoscale Magnesium Hydroxide under Normal Pressure
Membrane Separation Assisted One-Pot Synthesis of Hydroxyapatite Nanorods
Separation of Nickel in Manganese Sulfate Solution Soaked out from Low-Grade Pyrolusite with Pyrite and H2SO4
Study on the Technology of Synthesis Dimethyl Ether with Bi-Function Catalyst by Phophorus Modified
Development and Performance Study on Sportswear Fabrics
Dynamics Analysis in Materials on Solid Wastes Separation Sieve and Selection and Calculation of Kinetic Parameters
Study on Influence of Thermal Conductivity of Building Material on People's Physiology and Psychology
Study on Magnetic Model and Magnetic Force of Magnetic Fluid in Pressure Difference Sensor
Prediction of Soil-Cement Mechanical Properties Using EC2 Approach
Properties of Jute Blended Yarns Spun on Ring Spinning System
Action Mechanism of the Improvement of Printability for Eucalypt Bleached Kraft Pulp Pretreated by Cellulase
Comprehensive Evaluation Research on the Properties of Sportswear Fabrics
Effects of Mg2+ Doping on Performance of Anode Material Li4Ti5O12
Laboratory Evaluation of Warm-Mix Open Graded Friction Course Mixtures with Sasobit
Researchon Frost-Resistant Durability of Recycled Concrete
Using Control Chart to Detect Abnormal Changes in the Permeability
River Soil & Sand Solidified Blocks as Ballast in Beach Protection
Effect of Beeswax on Batch Foaming of PLA
Experimental Research on Failure Modes of Specimen Containing Non-Coplanar Joints
Electrospun La3+-Doped ZnO Nanofibers with High Photocatalytic Activity for Rhodamine B Degradation
Adhesive Pressing Veneer Performance Study of Compound Sheet of Straw
Hot-Pressing Process of the the API Adhesivepressed Veneer Straw Composite Panels
Finite Element Analysis of Axially Loaded RPC Filled Long Circular Steel Tube Columns
Study on the Thixotropic Properties of Mastic Asphalt
Effect of Gallium Doping on the Properties of GZO Target
Experimental Research on the Characteristics of Bamboo Powder Model Sediment
The Study of Dynamic Equations of ER Fluids Based on Multi-Field Coupling
Model and Simulaiton of Air Spring Stiffness Characteristics Based on van der Waals Equation
A Method of Tool Breakage Detection in CNC High-Speed Milling
Preparation and Photocatalytic Properties of Bi2WO6 with Different Morphologies
Theoretical and Experimental Study on Trans-Scale Properties of Soil Strength
Numerical Simulation of Internal Flow Drag Reduction with Triangular Riblet Surface
Proprieties of Plain-Weave Fabrics Produced with Twistless Cotton Yarns Made by Reverse Twist Process
Temperature Field Numerical Simulation of Screwy Thin-Walled Part Cladded by Hollow Laser Beam
Design of Pressurized Vaulted Rectangular Conduits Using the Rough Model Method
Soil Elastic-Plastic Rotation Gradient Theory Based on Grain Size Factor and its Finite Element Implementation
Model Analysis of Pressure Fluctuation in the Pressurized Submerged Combustion
Triaxial Test on the Construction-Aid Soil Stabilizer in Stabilizing Fine-Grained Soil
Numerical Simulation of Reinforcement Effect and Settlement of Concrete Pile Composite Foundation
Research on Influence Factors and Formulae for the Bearing Capacity of Angle Shear Connectors
Chapter 2: Traffic and Transportation Engineering, Civil and Mechanical Engineering
A Optimized Model for Runway Takeoff Scheduling
Study and Application of Traffic Flow Forecast Based on PSO-WLSSVM
Automatic Waring System of Tunnel Monitoring and Application
Visual Monitoring Technology of the Tunnel 3D Laser Scanning and Engineering Applications
The Applied Research of Emulsified Heavy Fuel Oil Used for the Marine Diesel Engine
Simulative Dynamic Performance Analysis of Submarine Diesel Exhaust Deballasting System
Investigating Impact of Speed on Traffic Safety using Collision Prediction Model
Feasibility Investigation on Reduced-Power Take-Off of MA600
A Method for Determining Length of Freeway Work Zone Based on Classification of Service Level
Electrostatic Discharge Generator Circuit Model and its Simulation
Ship Electric Propulsion Simulation System Based on MATLAB
The Compilation and Study of Design Case for Railway Passenger Car
Analysis and Discussion on Impact Factor to Asphalt Pavement Roughness of Airport
Research about Model of Vehicle's Fuel Consumption on the Highway
Molecular Simulation of the Adsorption of Cold Start Hydrocarbons Emission from Diesel Engines in Zeolite
Abnormal Events Detection in Traffic Data
Rail Short Wave Irregularities Restoration Algorithm Based on Digital Inverse Filter Technology
Analysis of Settlement Caused by Tunnel Underneath Existing Railway after Construction
Effect of Cross Passage Construction on the Structural Safety of Collapse Reinforcement Segment of Existing Tunnel
Reliabiliy of Road Network Layout and Optimization Methods Based on the Connectivity
Application of the Pre-Stressed Concrete Box-Girder with Corrugated Steel Webs in Bridge Engineering in China
Design and Stabilization Analysis of the Parabola-Type Assistance Characteristic of Electric Power Steering System
Isolated Intersection Traffic Signal Timing Problem: A Fuzzy Control Approach and a Case Study
Study on Lateral Vibration Offsets of Speed Increased Freight Cars on the Tangent Track
Experimental Study on the River Engineering Model of Tunnel across Yangtze River about Line No.8 of Track Traffic in Wuhan
Research on Valid Serve Life of Pavement Marking in Urban Area
Research on the Effect of Grassland Highway Curves on Driver's HRV
Optimization Design of Gasoline Engine Intake Based on CFD
Design of a New Multifunctional Motorized Wheel for Urban Electric Vehicle
Prediction for Sound Radiated Power from Submerged Double Cylindrical Shells Based on Measuring Vibration of Inner Shell
Simulation Analysis on Wheel and Groove Rail Contact Position
Highway Tunnel Ventilation Technology Energy-Saving Assessment Based on Matter-Element Model
Resistance and Strength Analysis of Three Hulls with Different Knuckles
Research of Effect on the Levee by Drawdown of Caisson Foundation of the North Anchorage of Maanshan Yangtze River Bridge
A Professional Safety Consultant Mode for Engineering Construction and its Application in Taizhou Bridge
Study on Soft Foundation Settlement Analysis and Treatment of Bridge-Head
Crew Qualification Comprehensive Evaluation of Shipping Enterprise Based on Multi-Level Fuzzy Evaluation Method
Application Effect Analysis of Magnetic Gradients Data Continuation from Undulate Surface to Plane
Research on Approaches for Low-Carbon Transportation Strategy from both Supply and Demand Sides
The Processing Technology and Dynamic Balancing of Turbocharger Rotor Parts
Rail Profile Wear on Curve and its Effect on Wheel-Rail Contact Geometry
Rail Pre-Grinding on Shanghai-Nanjing PDL and its Effect on Wheel-Rail Contact Geometry
Structure Fatigue Life Analysis of a 1.5MW Smart Yaw Slewing Bearing
Research on the Modal Damping Ratio for Stay Cable with Viscoselasticity Damper in Cable-Stayed Bridges
Parameter Identification of the Non-Linear Rolling Damping Based on PLS Regression Technique
Discussion on the Calculation and Analytic Method of the Surrounding Rock of Tunnel on the ADINA
Methodology for Evaluation of Lighting Standards at an Expressway Tunnel Threshold Zone
Study and Application of High-Speed Railway Real-Time Dynamic Response Based on Running Simulation
Bidirectional Dynamic Programming Approach for Highway Alignment Optimization
Study on the Ignition Factor of Piston Kerosene Engine
The Solution of Directed D-Axis Current for the Bearingless Induction Motors
Simulation and Optimization of Turbine Blade Shape Modification
Application of Grey-Markov Model in Predicting Container Throughput of Fujian Province
Study on Extenics Evaluation of the Safety for Urban Road Intersections
Analysis and Prediction of Ground Vibration Induced by High-Speed Train
Study and Design of Integrated System of Electromagnetic and Frictional Brake of Car
Applicability Analysis for the Reconstruction Model of Automobile Two-Dimensional Eccentric Collision Accidents
The Long Highway Tunnel Disaster Prevention Research
Dynamic Response Analysis of Small Oil Tanker Based on AQWA
Research on Preventive Management of Freeway Traffic Accident
Wharf Risk Assessment Based on AHP&D-S Evidence Theory
Tunnel Waterproofing Board Construction Process Analysis
Research a New Automatic Detective Method of Highway Traffic Statement Based on the Information From the License Plate Data
The Current Situation Analysis of Parking in Baotou Urban Center District and Countermeasures
MOTION - A Developing Urban Adaptive Traffic Signal Control System
Real-Time Monitoring School Buses Safety and Information Query System Design
Simulation Research of Flow and Speed on Urban Expressway Interchange Entrance
A New Method on Calculation of Vessels Stopping Distance and Crash Stopping Distance
Study on Traffic Congestion Pricing for Large Scale Multimodal Networks in City
Valve Cam Profile Design of High-Speed Diesel Engine Based on MATLAB
Research on the Modeling Methods of the Service Network Meeting the Requirements of Passenger Flow Assignment in Urban Rail Transit
A Study on Mathematical Model of Servo Valve Torque Motor
The Research and Development of Filtration Media Materials for Application in Water Filtration Treatment Systems
Analysis on Traffic Characteristics of Passenger Cars with more than 7 Seats on Megacity's Freeway Network Using ETC Data
Research on Utilization Characteristic and Management Issue of Asphalt Pavement of Airfield Runway on Highway
Performance and Evaluation Index for Asphalt Pavement of Airfield Runway on Highway
Analysis on Requirement and Prediction of Feeder Airport Resources Based on TDM
Model Test and Numerical Simulation for Directional Pressure Relief Blasting
Thermal Management System Analysis of Underwater Vehicle Fuel Cell Propulsion Unit
Study on the Berthing Capability of Pontoon Bases
Tourism Highway Traffic Demand Forecasting of Tourist Attractions: A Case Study of Xingkai Lake, China
Research on Assessment of Urban Transportation Low-Carbonization Development
Bus Passenger Origin-Destination Matrix Estimation Using Available Information from Automatic Data Collection Systems in Chongqing, China
Experimental Study on Longitudinal Sliding Friction Coefficient of Sedan Braking
Automatic Identification and Optimization Algorithm of Existing Railway Planar Feature Points
3D Numerical Simulation of Current and Sediment Transport in Estuary and Coast
The Impact of Plateau Airport's Environment on Air Traffic Controller's Situation Awareness
Research and Development of Unmanned Aviation Vehicle System for Disaster Countermeasures
The High Speed Influence on Inherent Frequency of Motorized Spindle
Determination Analysis of the Torsion Beam Suspension FEA Model and Fatigue Strain Based on Road Test
Study on Driver's Reaction Time of Emergency Braking
Research on Tunnel Interior Zone Luminance Evaluation Method and its Application
Experiment and Study of Light Truck Longitudinal Braking Friction Coefficient
Safety Evaluation of Freeway Alignment Case Analysis
Study on the Length of Speed-Change Lane in Freeway Trumpet Interchange
Design of Freeway Traffic Block Multi-Dimensional Data Warehouse
Study on Key Factors in Piston Transient Temperature Field
Study on Unsteady Temperature Field of Diesel Engine Piston
Multi-Objective Optimization and Parameter Tuning for Turbine PID Controller
Research on Drop and Pull Transportation Cost of Entire Car
The Method of Selecting the Key Freight Transport Industries Based on Weaver-Thomas Index
Location Optimization of Airport Emergency Firefighting System
The Major Problems Needed to be Resolved in the Development of Electric Vehicles at the Present Stage in China
Diesel Engine Spray Modeling with Lattice Boltzmann Method
Research on Nozzle Geometry Measurement with Synchrotron Radiation X-Ray Phase Contrast Imaging Technique
Analysis of Operation Load Parameters in the Process of Container Transportation
Characteristic Extraction of Fatigue Driver's EEG Signals Based on Wavelet Entropy
Simulation Research on Plain 2-D Numerical Value of Submerged Spur Dike
Research on the Model of Road Traffic Safety Evaluation Based on Synergetics Theory
Green Transportation and Land Use Planning
Inefficiency of Stackelberg Stochastic Traffic Network with Tax Scheme
Experimental Study on Transporting Concentration of Pulverized-Coal Using ECT
Path Optimization Design of Multimode Combined Transport Based on the Linear Programming Method
Real-Time Evacuation Path: Unexpectedly Increased Numbers of Evacuees in Source Nodes
Port Service Efficiency Model Based on Optimization of Supply Chain Logistics System
Study on Analysis and Preventive Measures for Damage of Durability of Reinforced Concrete Bridges
Introduction to Rural Road Greening
Importance of Road Network Layout and Optimization Methods Based on the Reliability
The Development of Automatic Girth Welding Machine with Dual-Arm for Automobile Axle
A Design Scheme of the Automatic Obstacle-Avoidance Car
Development of Automobile Drive Shaft Automatic Welding Machine
The Brake Guards against Holds the Dead (ABS) Teaching Laboratory Bench the Development
The Automobile Brake Guards against Holds the Dead (ABS) Laboratory Bench Wheel Hydraulic Pressure Actuation System the Development
A Methodology of Side Impact Sled Test in MADYMO
Ice Resistance Model Test Technology for 110K Tanker Adopting FSICR Ice Class IA
Evaluation of ESD/LU Reliabilities by Different SCR Layout Types in a 0.35 m 3.3V CMOS Process
Structure Characteristics and Improvement of Oil Seal of Turbo-Supercharger
Research on Regulation Scheme of Yaojian Reach in the Yangtze River
Design of the Motorcycle Engine Fuel Supplying System Based on the Ultrasonic Atomization
Sediment Transport and its Effect on Navigation in Long Tailrace of Hydropower Station
Waterway Regulation Effect of the Letianxi Reach between the Three Gorges Project and Gezhouba Project
Park and Ride Facility Location Research of Rail Transit Based on Bi-Level Programming Model
Risk Assessment and Risk Control for Navigation Environment of Dock Waters Adjacent to Fairway
Diversion Scheme for Yuliang Hydro-Junction Project of Youjiang River in Construction Period
Numerical Simulation for Pile Group in Water Flume of 2-D Tidal Flow
Magnifying Drivers of City Transformation through System Dynamics Models
Study on the Deep Foundation Effect on the Adjacent Underground Structures during a Metro Station Construction
Simulation Research of Auto Disturbance Rejection Control System for Mineral Inverter Source
Research on the Characteristics of Steel Frame Node under Explosive and Impact Load
Modeling of a Compressor's Performance Map by Fitting Function Methodology
The Impaction of Traffic Rights Opening on the Optimization of the Regional Industrial Structure Evolution
Time-Space Diagram Analysis of Urged Acceleration CA Model
Fault Analysis of Switching Regulator Induced by the Diode Turn-On Time
Chapter 3: Environmental and Energy Engineering, Sustainable and Green Industry, Geoengineering Applications
Acid Volatile Sulfide (AVS) and Simultaneously Extracted Metals (SEM) in Surface Sediments of Chaohu Lake, Anhui Province, China
Utilization of the By-Products for Simultaneous Purification of Sulfur Dioxide and Nitrogen Oxide in Bio-Trickling Process
Three-Dimensional Flow Numerical Simulation of Wuhan Yangluo Waterways
Analysis of Phytoplankton and Eutrophication in Xinlicheng Reservoir
Molecular Weight Distribution of DOC in Effluent of Petrochemical Wastewater Treatment Units
Study on Absorption of Cu2+ and Cd2+ in Wastewater by Modified Bentonite
The Influence of Organic Loading Rates on Hydrolysis and Acidification Rates of Fruit and Vegetable Waste Anaerobic Fermentation
Dynamic Variation Analysis on Tibetan Lake Wetlands Based on RS
Temporal Variation and Meteorological Dependence of Polychlorinated Biphenyls in Atmospheric PM10 of Jinan, China
Resource Recycling of Waste Slag of Aluminum Factory
Baseline Values for Heavy Metals in Soils on Ny-Alesund, Spitsbergen Island, Arctic: The Extent of Anthropogenic Pollution
The Effect of Relative Humidity on Physiological Equivalent Temperature in Hot Environment
Research on Assessment Model for the Indirect Economic Benefit of Solid Waste Sanitary Landfill
Research on Urban's Planning and Construction of Ecological Corridor around City in Guizhou Areas, Southwest of China
Research and Application of Similarity Criterion in Advance Water Flooding in Low Permeability Reservoir
Assessment of Aquifer Salinization Beneath an Offshore Industrial Park Based on Solute Transport Calculation
Effect of Adding Fillers on Rubbish Degradation and Leachate Yield and Water Quality
Research of Anaerobic Fermentation Hydrogen Production Process by Continuous Flow from Contained Sugar Wastewater
Experimental Study on Oil-Degradation Microbial Consortium from Oil-Contaminated Soil by Different Enrichment and Domestication
Sustainable Utilization of Regional Water Resource in Yin Chuan City Based on Fuzzy Matter-Element Model
Investigation of the Roadside Forest Based on "Carbon Neutral"
Research on Sustainable Development Mechanism of Renewable Energy Using System Theory
The Application of BIM in Updating the Thermal Environment Design of Traditional Residences in Mountain Region - A Case of Chongqing
River Landscape Health Diagnosis - Frame and Method
Semi-Supervised Discriminant Projection for Plant Leaf Classification
An Discussion of Vegetables Freezing Rates of Vacuum Cooling and Refrigerator Cooling
The Pollution Assessment on the Heavy Metal of Fish in the Huan River
Hydraulic Loading on Test of Nitrogen and Phosphorus Removal from Rural Sewage by Subsurface Constructed Wetlands-Ponds Composite System
Elman's Recurrent Neural Network Applied to Forecasting Algal Dynamic Variation in Gonghu Bay
Research on Influence of Flow Velocity Regime and Sediment Deposit before Underground Hydroelectric Station,Three Gorges Project
Effect on Marine Ecological Environment of COD Emission of Wastewater
Analysis of Bioretention Cell Design Elements Based on Fourier Amplitude Sensitivity Test (FAST)
The Storm Deposits Sedimentary Formation in Upper Ganchaigou Group of Youshashan Oilfield in Qaidam Basin
A Comparison Study of Trace Elements along Two Transects in Tidal Mangrove Marsh at Dongzhaigang, Hainan, China
Potassium Permanganate and Chlorine Reactions with Natural Organic Compounds in Algerian Surface Water
Measuring Biomass Energy Flows of a Rural Energy Engineering
Effects of Gangue on Pyrolysis of Municipal Solid Waste
Water Environmental Regulations Pertaining to Urban Moats: An Example from the Qinhuai River, Nanjing
Study on the Low Carbon City of Guangzhou by Energy Model
Research and Application of Real-Time Remote Monitoring and Early Warning System of Source Water Quality
Effects of Seepage Channel Features on Stress Sensitivity of Carbonate Reservoirs
The Prediction of Thermal Conductivity of Agricultural Residues from Straw for Biomass Energy
Research of Compound Fuzzy Controller in Temperature of Air-Conditioning Room
The Effect of the Fracture Surface for Stress Sensitivity in Shale Reservoir
A Review on Biomass Fast Pyrolysis Oil Properties and Applications
The Individual WTA Changing Analysis for Eco-Compensation Construction in Water Source Conservation Area
Sand Mining Monitoring andAnalysis of the Yangtze River Based on Multi-Beam Bathymetry
Groundwater Vulnerability Fuzzy Evaluation in Qujing Basin
Geothermal Geology Characteristic and Origin Analysis of Shilin Basin in Yunnan Province
Soil Erosion and Preventive Measures in the 3rd Expansion Project of Xiaolongtan Power-Station
The Porous Medium of Ultra-Low Permeability Reservoir has an Effect on Oil Recovery
Study on Sediment Reduction Effect by Soil Retaining Dam with Different Storage Capacity Allocation Proportion in Dali River Watershed
Energy Saving from Traditional Settlement - A Case Study on Environmental Ideology of Traditional Settlement in Fujian, China
Summer and Cold Winter Region Residential Energy-Saving Strategy
Influencing Factors Analysis of Carbon Dioxide Emissions of Liaoning Power Consumption Based on Kaya Model
Derivation and Verification of the Breakage Rate Coefficient during Flocculation Process Based on Shear Strength
Study on Sudden Cadmium Pollution Emergency Treatment Tests of Drinking Water Source of Cities
Evaluation of Heavy Metal Contamination to Planting Base Soil in Shenyang, China
Pulsed SBR Treatment of Municipal Sewage Denitrification and Experimental Research
Investigation on Present Status of Environmental Quality of Mt. Longhushan Scenic Area and Analysis on Optimization Measures
Potential of Mixotrophic Cultivation of Chlorella sorokiniana for Biodiesel Production
Relationship between Phytoplankton and Nutrient Dynamics in the Enclosed Waterbody, Dianchi Lake
Pretreatment of Seawater by PAC/PAM Coagulation-Photocatalytic Oxidation Process
Research on Regulation Thoughts for Shoal at Confluence of Xinzhou Channel in the Middle Reach of the Yangtze River
A Rapid In Situ Monitoring System for the Determination of Total Phosphorus in Waters
Distribution of Available S in the Soil Environment of Yunnan Plateau
Analysis on Bank Collapse Mechanism of Typical Reaches in Middle and Lower Yangtze River
Based on Low Carbon Economy under the Environment of Green Car Terminal Returned Logistics is Analysed
The Removal of Deinking Wastewater Using Neutralization, Activated Carbon, and Hydrogen Peroxide Oxidation
Evaluation of Human Settlements Environment Suitable for the Nujiang Canyon Based on AHP and GIS
Environmental Problems and Protection Measures on Wastewater Treatment from Hardware Tool Plant in Danzao Town
Development of Parallel Program of Two-Dimensional Flow-Sediment Mathematical Model for Long River Reach
The Green Comprehensive Evaluation of Electric Power Project
Canopy Water Content Estimation for Typical Emerged Plant Community from Simulation Worldview-2 Data: A Case Study in Wild Duck Lake Wetland, Beijing
The Effect of Trade Liberalization on the Environment: An Empirical Analysis in Zhongshan City
Spatial and Temporal Distribution of Inhalable Particulate Matter Pollution in Beijing City during 2007-2012
Analysis of Water Diversion Way and Suitable Discharge Based on Water Environment Improvement Goal in the River Network
Water Environment Monitoring System Based on Data Extraction - Transmission and Processing
The Application of Principal Component Analysis in Comprehensive Evaluation of Liaohe River Water Quality
Comparison Study on Adsorption and Removal of Antimony from Acidic Aqueous Solution by Activated Carbons and Machine-Made Charcoal
Evaluation of Site Selection for National Strategic Reserve Depots of Refined Petroleum Products
Research on Characteristics of New Water and Sediment of Yichang Station after Impoundment of the Three Gorges
Improved Fuzzy Equilibrium Average Type Comprehensive Evaluation Method in the Application of Water Quality Evaluation
Lime-Mediated Sewage Sludge and Gas Ash use as Metallurgy Sintering Ingredients
Effect of Dissolved Oxygen on Nitrogen and Phosphorus Removal Rate in Biolak Process
Correlation between the Avian Community and Habitat Type during the Wintering Period in Zhalong National Nature Reserve, China
Problems and Countermeasures on Urban Infrastructure Construction of Shenyang
The BIM 'Families' Based Environmental Performance Design Research
Navigational Environmental Risk Evaluation of Breakwater Based on the Analytic Hierarchy Process
Preliminary Analysis of the Hydrodynamic and Siltation Characteristics Downstream of Sheyanghe Sluice
Parameters Effect on Photocatalytic Reduction Kinetics of Bromate in Aqueous Dispersion of TiO2
The Level of Zn in Guiyang Street Dust and its Different Particle Size Fraction Contributions
Experimental Study on Wastewater Treatment Containing Copper with Electrodeposition Method
Application of Immobilized Fungi Phanerochaete chrysosporium in Removal of Heavy-Metals from Wastewater
Effects of Nutritional Conditions on the Stable Carbon and Nitrogen Isotope of Microalgae
Chapter 4: Data Processing and Information Technologies, Computer Methods, Management, Logistics and Network Applications
Efficient Storage and Retrieval of XML Documents Using XQuery
Research on Wavelet-Based Image Target Detection & Recognition Technology
An Algorithm of the Rough-ISM Analysis Method
Compaction Management: Results of a Demonstration Project
The Studies of Stability of Non-Interval Gray Verhulst Model
Forecast Method Study on Track Longitudinal Level Irregularity Based on Most Possible Similarity Model
A Novel Fault Tree Analysis Theory
Design and Implementation of Long Range Active RFID Technology
RGB Primary Color LED Backlight System Based on MCU
Bloom Filter Routing Protocol for Wireless Sensor Networks
E-Book Reader Research Based on Kansei Engineering
An EEG Investigation of the Impact of Noise on Attention
The Research on Emergency Supplies Dispatching under the Circumstance of Unconventional Emergency
Research and Application of Decision Tree Technology in Retinopathy
3PL-HUB Supply Chain Logistics Cost Simulation Study Based on System Dynamics
Research on Time Management for Project Cluster Development
Purchase Research on Supply Chain for EPC Project
Introduction to Partial Least Square: Common Criteria and Practical Considerations
The Study on Blind Unmixing for Hyperspectral Imagery
How to Apply the Principle of Projection Transformation to Deduce the Segment's Real Length in the Right-Angled Triangle
Comprehensive Evaluation on the Development of Industry Cluster Circular Economy
Color Gray Research of Software Interface Design Based on Optical Display Equipment
Sustainable Logistic of Raw Materials Used by a Zootechnical Firm. Focus on CO2 Emission Reduction through the Creation of a Local Suppliers Network
GMSPPF for Magnetic Ellipsoid Tracking with a Magnetic Gradiometer Tensor
Super Exponential Iteration Adaptive Minimum Entropy Blind Equalization Algorithm Based on Quantum Artificial Fish Swarm Optimization
A New Detector for Impulse Noise Removal
Design and Implementation of the Steel Enterprise MES Based on CICS
Optimization Study Based on the Mileage-Saving Method of Oil Distribution
The Security Mechanism Research of PACS
The Achieve Method of the Panorama Field Geological Image Web Shared
Data Compression Method for Road 3D Scene Real-Time Network Transmission
by "Nielsen BookData"
