Advanced research on material engineering, chemistry and environment : selected, peer reviewed papers from the 2013 International Conference on Material Engineering, Chemistry and Environment (MECE 2013), August 24-25, 2013, Wuhan, China

著者

    • International Conference on Material Engineering, Chemistry and Environment
    • Zhang, Helen
    • Jin, David
    • Zhao, X. J.

書誌事項

Advanced research on material engineering, chemistry and environment : selected, peer reviewed papers from the 2013 International Conference on Material Engineering, Chemistry and Environment (MECE 2013), August 24-25, 2013, Wuhan, China

edited by Helen Zhang, David Jin and X.J. Zhao

(Advanced materials research, v. 788)

Trans Tech Publications, c2013

  • : pbk

大学図書館所蔵 件 / 1

この図書・雑誌をさがす

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Collection of selected, peer reviewed papers from the 2013 International Conference on Material Engineering, Chemistry and Environment (MECE2013), August 24-25, 2013, Wuhan, China. The 160 papers are grouped as follows: Chapter 1: Applied Materials Engineering; Chapter 2: Chemistry Engineering; Chapter 3: Technologies of Environmental Engineering; Chapter 4: Materials and Technologies in Building; Chapter 5: New Energy Sources and Modern Technologies of its Storage; Chapter 6: Related Topics.

目次

Preface and Committee Chapter 1: Applied Materials Engineering Research on the Synthesis and Application of Graphene Composite Nanomaterials Synthesis and Application of Porous Nanomaterials A Review on the Binary Oxide Nanomaterials for the Electrochemical Performance Surface-Enhanced Raman Scattering Determination of Trace Phenanthroline Using Aggregated-Nanosilver as Substrate Nanogold Resonance Rayleigh Scattering Determination of Trace Cr3+ Resonance Rayleigh Scattering Spectral Determination of As(V) Using Cu(II) as Catalyst Study of Deoxidization and Desulphurization in Slag Washing Process of Al-Killed Steel Studies on Solid Solution of Fe50-Cu50 Compounds by Mechanical Alloying Experimental Research on Vacuum Diffusion Bonding of AS-Extruded AZ61 Magnesium Alloy Analysis on Effects of Strain Rate to Dynamic Recrystallization Process of Metals by 2-D CA Model Coupling Numerical Simulation of Resin Matrix Composites about Temperature and Degree of Cure Fields by Hot-Press Forming Preparation and Luminescent Properties of Sm3+ Doped Ca3SiO4Cl2 Phosphor The Research about Biological Materials and Exercise-Induced Articular Cartilage Injury Numerical Simulation and Process Optimization of Automotive Friction Materials in Warm Pressing Forming Characterization of Zinc Oxide Nanoparticles and their Inhibitory Effect on Human Lens Epithelial Cells under UVB Irradiation Design and Development of Petrochemical Corrosion and Protection Case Base on B/S Model and Material Properties Construction of Nano Coenzyme and Enzyme Multilayer Film on Gold Electrode by Self-Assembly Method Multi-Response Optimization of TiC-Cu P/M Composite Physical Properties The Development Trends of the Computer-Nanocomputer Based on Nanotechnology and Properties of Nanomaterials Study on Mechanical Properties of GF/PVC with CPE and ACR Nonlinear Optical Properties of the AgGa1-xInxSe2 Crystal Effects of Excess Bismuth Content on Microstructure and Electric Properties of Europium-Substituted Bismuth Titanate Thin Films Effects of Electrode Size and Position on the Force-Frequency Characteristic of Integrated Resonator Study on Transformation Behavior of Retained Austenite in TRIP Steel Crystallization Growth of Titanium Silicalite-1 over Monolithic Cordierite Support Effect of TiO2 Nanoparticles on Cellulose Acetate Microporous Membrane Performance Adsorption of In3+ from Aqueous Solutions by Persimmon Tannins-Immobilized Collagen Fiber Study on Hydroxyapatite Fibers with Strontium Reinforced Calcium Phosphate Cement Preparation and Characterization of Chelerythrine Nanoparticles Composed of Magnetic Multiwalled Carbon Nanotubes The Effect of Precipitants on Co-Precipitation Synthesis of MgO-ZrO2 Powders Unmodified Goldnanoparticles Used as Probes for Detection of Coralyne with poly(A40) Effect of Annealing Treatment on Structure and Electrochemical Properties of LaNi4.5Co0.25Al0.25 Alloy with Low Co Content Experimental Study on Compression Mechanical Properties of Aluminum Foams with Passive Confined Pressure Influence of Transmembrane Pressure on Microfiltration of Suspensions Chapter 2: Chemistry Engineering Synthesis and Resistive Switching Characteristics of Ethyl Methacrylate /N, N'-4, 4'-Diphenylmethane-Bismaleimide Copolymer Trifluoromethyl-Promoted Oxidation of Fischer N-Heterocyclic Carbene Complexes by DMSO Study on Chemical Engineering with Evaluation of Efficiency of Safety Resources Invested in Chemical Enterprises Based on Accounting Information Extraction and Characterization of Silk Fibroin from Waste Silk A Novel Polymer Supported Catalyst for Preparation of Sydiopolystyrene Synthesis, Photochromic Properties of an Unsymmetrical Diarylethene Bearing Fluorene Ring Synthesis, Properties of a Photochromic Diarylethene Material Bearing Benzofuran and Thiazole Rings Synthesis and Properties of a Novel Unsymmetrical Diarylethene with a Benzothiophene and a Thiazole Group Synthesis and Properties of a New Unsymmetrical Diarylethene Bearing Benzothiophene and Thiophene Rings Synthesis and Properties of a Novel Photochromic Diarylethene 1-(2,4-dimethyl-5-thiazolyl)-2-[2-methyl-5-(4-formylphenyl)-3-thienyl]perfluorocyclopentene Photochromism and Fluorescent Switch Material of a Novel Diarylethene Bearing Phenanthrene Unit Synthesis, Photochromic Properties of a Hybrid Diarylethene Material with a Benzene Unit Photochromism and Optical Recording of a Novel Photochromic Diarylethene Material Bearing a Phenanthrenyl Unit Synthesizes and Properties of a Novel Unsymmetrical Photochromic Diarylethene Material Synthesizes and Properties of a New Unsymmetrical Diarylethene with a Naphthalene Moiety The Study on Curing Kinetics of Lignin Based Epoxy Resin System Using Non-Isothermal DSC Method Study on Inner Vortex in a Hydrocyclone through Numerical Simulation Application of Vibrating Fluidized Bed in Low Rank Coal Drying Process One-Step Preparation of Monodisperse Vinyl Hybrid Nanosilica Hydrosol Effects of Disperse Dyes on Dyeing of Ethylated Chinese Fir Powder Study on the Dispersion of Carbon Doped Titanium Dioxide Powder in Aqueous Solution Chapter 3: Technologies of Environmental Engineering Environment Analysis with Temperature Change in Jarud in Recent 59 Years Co-Oxidation Effects of Methanol on Reactive Orange 7 and Polyvinyl Alcohol in Supercritical Water Catalytic Wet Peroxide Oxidation of Epoxy Resin Wastewater for Reusing Membrane Fouling Mechanism and its Control in the Treatment of Brackish Water with Reverse Osmosis Process The Application of A/O Treating Mixing Pharmaceutical Wastewater Extraction of Rare Earth Elements from Waste Trichromatic Fluorescent Phosphors Environmental Pollution Analysis and Countermeasures of the Golf Course in Yangzonghai Area Study on Byproducts Recycling in Eco-Industrial Parks Study on Environment Engineering with the First Long-Term Agreement on Energy Efficiency of Netherlands and its Enlightenments Study on Low-Carbon Catalytic Combustion Furnace of Natural Gas and the Application in Greenhouse Impact of Shallow Groundwater Quality Evolution in Kunming Urban by Human Activities The Study of Groundwater Environment Pollution Risk Assessment in Lead Zinc Ore Study on Environment Resources with Assessment on the Sustaninability of Use of Land Resources in Hebei Province Analysis of the Bacterial Community by 454 Pyrosequencing in Two Freshwater Lakes: Yangcheng Lake and Taihu Lake in China Research on Environment Improvement with Development Strategies of Low Carbon Ecological Shijiazhuang City Implementation of Environmental Supervision on Promoting Environmental Impact Assessment System Influence of Temperature and Gibberellins on Growth and Development of Tuberose in Greenhouse The Establishment of Dynamic and Integrated Environmental Risk Control System for Residential Projects The Realization Processes of Dynamic and Integrated Environmental Risk Control System for Residential Projects Spatial Analysis for Groundwater Pollution Based on Monitoring Data by COMGIS Study on Environment Evaluation with the Review of Approaching Degree in Fuzzy Recognition The Review of Ecosystem Evaluation Method Based on Environment Protection Surface Water Quality Assessment in Main Stream of Liaohe River Research on the Ecological Environment Protection from the Perspective of People's Livelihood Analysis of Recycling Network Model on Scrapped Automobile Exhaust Catalysts Based on Perspective of Environmental Protection Research on Control Strategy of Dissolved Oxygen in Aerobic Wastewater Treatment Process Research on Recreationist Segmentation of Islet in River Based on Environmental Attitude Perspective Evaluation Index System of Tourism Ecological Environment Security of Islet in River and it's Application Catalytic Reaction-Nanogold Resonance Rayleigh Scattering Method for Thedetermination of Trace Tellurium Study on Tourism Environment with Strategic Research on the Tourism Development of Hunan Low-Carbon The Sustainable Development of Ecological Environment from the Perspective of Ecological Ethics Effects of Different Fertilizers with Material Properties on Hot Pepper Growth and Microorganisms Study on Environment Engineering with Influence of Human Factors on the Temperature Variation in Beijing City Decontamination of Wastewaters Containing Synthetic Organic Dyes by Electrochemical Methods: A Review Partial Oxidative Gasification of Coking Wastewater in Supercritical Water Analysis of Axial Local Flux Characteristics in Hollow-Fiber Membrane Study on the Assessment Method of Wastewater Treatment Technologies Based on Comprehensive Scoring Method Bioremediation of Nitrobenzene Contaminated Groundwater by a Mixed Culture Research on the Removal Effect of Acidic Wastewater Containing Copper by Steel Slag Treatment of Organic Phosphorus Pesticides Manufacturing Wastewater by Supercritical Water Oxidation Selection of Material with High Salt Concentration in Preheating Section of Supercritical Water Oxidation System ELISA Applied on Survey and Remediation of Dioxin Contaminated Site - A Case Study in Southern Taiwan Optimization of Ultrasonic-Assisted Regeneration Process for Coconut Shell Activated Carbon Based on Response Surface Method Study on the Transport of Heavy Metal Lead in Radish and the Influence of Radish Growth with Organic Fertilizer Accumulation of Heavy Metals by Wetland Plants with Different Root Systems in a Karst Mountainous Area Flue-Gas Desulfurization Technology and its Equipment A Study on Adsorption Kinetics of Antimony onto Coconut Shell Activated Carbon Study on the Antibiotic Bacterial Residue for the Human Health Risk Assessment Research on Landscape Environment with 3D-Reconstruction and Volume Measurement of Fruit Tree Canopy Based on Kinect The Distribution Characteristics of Total Sulfur Content of Coals Formatting in Different Geological Age, Guangxi Province, China Chapter 4: Materials and Technologies in Building Study on the Measure of Reducing Noise and Vibration of Over-Track Buildings Induced by Crane Load PKPM and SAP2000 Software on a Layer of Engineering Aseismic Structure Performance Analysis Based on Structure Mechanics A New Method for Predicting Compressive Strength of Cement-Based Materials Beam Frame Supported Shear Wall Structure Based on the ANSYS Finite Element Static Analysis of Beam-Type Transfer Floor The Study of Sheer Lag Effect by the Influence of Strengthened Story The Seismic Performance Analysis of Brick Masonry Wall between Windows with the Isolation Seam Reinforced Concrete Frame - Shear Wall Structure, Floor Open Hole Static Finite Element Analysis Simulating Effect of Anchor Cable Pre-Tension to Supporting Structure Adding Layer of Steel Structure of Safety Testing and Add Layer and Reinforcement of Feasibility Analysis Structure Mechanics Analysis with Different Construction Schemes in Large-Span Space Grid Structure Analysis on the Ductility Performance of Reinforced Concrete Coupling Beams in Shear Wall Structure Analysis of Transformation Layer in Frame Supported Shear Wall Loading Height on Reinforced Brick Masonry Wall's Failure Mode and Seismic Performance with Finite Element Analysis Method Performance of Steel Fiber Reinforced Concrete (SFRC) and its Application in Civil Engineering The Hanging Point of the Spatial Grid Structure High Strength Bolt Fatigue Notch Effect Analysis Static and Dynamic Analysis for Tower in a High-Rise Steel Reinforced Concrete Composite Structure The Static Finite Element Analysis of the same Bar under the Different Welding Tubular Rectangle-Joints Axial Compression Welding Hollow Hollow Ball Node Wall Fitting Surface Stress Formula Reinforced Concrete Frame Structure Based on ANSYS Optimization Analysis and Material Properties The Vertical Bearing Capacity Analysis of Screw Pile in Clay The Numerical Analysis of Isolation System in the Sandwich Structure Based on Properties of Reinforced Concrete Mechanics Research on the Vertical Bearing Characteristics of Suction Pile Cluster in Soft Ground Evaluation of Slope Stability Based on Fuzzy Grey Element-Matter Model Based on Properties of Mechanics Study on Mechanical Materials with Overview of Connection and Separation Devices Damping Integrated Technology in Three Concentric Circles Stereoscopic Applications on Steel Arch Truss The Stability Analysis on the Different Types of Single Layer Latticed Shell Different Force Conditions on Nonlinear Finite Element Analysis of Small Concrete Hollow Block Wall with Failure Modes of Influence The Research on the Influence of the Forms of Foundation on the Behavior of Adjacent Excavation Based on Building Materials Research on HEC's Hardening Effects on Topsoil in China's Xinjiang Uygur Autonomous Region Application of In Situ Direct Shear Test for Obtaining Soil Shear Strength Indexes in Projects Study on Flexible Base Asphalt Pavement Design System Based on the Dynamic Modulus Study on Engineering Materials with the Comparison and Discussion of Support Scheme in a Foundation Pit Study on Soil Particle Size Distribution by Digital Image Processing Study on Engineering Materials with Results of the Analysis of the Influence of Foundation Pit Surrounding Buildings Settlement Theoretical Analysis on Settlement Calculation of Pile Foundation with Minimum Complementary Energy of Elastic Mechanics Based on the Ritz Variational Method Investigation on the Performances of High Volume White Mud-Fly Ash Brick The Relative Performance Study of Foam Concrete Straw-Based Material Properties Test of Wooden Architecture and its Mechanical Properties Study on Building Materials with Exterior Insulation System Problems and Solutions Implication of Filling Technology with Super Absorbing Material on Inclined Face with Highland Stress Service Life Checking Calculation of Marine Reinforced Concrete Structures Based on Monte Carlo Method Chapter 5: New Energy Sources and Modern Technologies of its Storage An Optimization Capacity Design Method of Battery Energy Storage Based on SOC for Leveling Off the PV Power Fluctuation Multiple Benefits Analysis of Energy Storage with the Application in Large Enterprises Integrated Thin-Film Rechargeable Battery on -Si Thin-Film Solar Cell Study on Biogas Production by Mesophilic Fermentation with Conyza canadensis Study on the Startup Characteristics of the Methanogenic UASB Reactor under Acid Condition at pH5.5 The Petrophysical Study for Shale Sample Based on Autoscan-II Platform Experimental Study on Potential of Biogas Fermentation with Walnut Peel Performance and Emissions Characteristics of the Butanol-Gasoline Blends in an EFI Gasoline Engine Chapter 6: Related Topics The Effect of Magnetic Field on the Deposition of Paraffin Wax on the Oil Pipe The Strategy of Shape Setup Model and the Obtaining of Several Key Parameters in Hot Strip Mill Process Determination of Hydrogen Gas Emitted from Coal by Gas Chromatography and its Significance Study on the Application of New Materials in Clothing Design Decision-Making Strategy in Scraped Automobiles Recycling Industry Based on Properties of Recycling Materials Study on the Influence of Downward Continuation on Matching Suitability in Underwater Geomagnetic Navigation

「Nielsen BookData」 より

関連文献: 1件中  1-1を表示

詳細情報

  • NII書誌ID(NCID)
    BB1496768X
  • ISBN
    • 9783037858226
  • 出版国コード
    sz
  • タイトル言語コード
    eng
  • 本文言語コード
    eng
  • 出版地
    Durnten-Zurich
  • ページ数/冊数
    xvii, 757 p.
  • 大きさ
    24 cm
  • 親書誌ID
ページトップへ