Advances in materials, processing and manufacturing : selected, peer reviewed papers from the 13th International Conference on Quality in Research (QiR 2013), June 25-28, 2013, Yogyakarta, Indonesia

著者

• International Conference on Quality in Research
• Yuwono, Akhmad Herman

書誌事項

Advances in materials, processing and manufacturing : selected, peer reviewed papers from the 13th International Conference on Quality in Research (QiR 2013), June 25-28, 2013, Yogyakarta, Indonesia

edited by Akhmad Herman Yuwono

（Advanced materials research, v. 789）

Trans Tech Publications, c2013

• : pbk

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). This book is a collection of peer reviewed papers presented under Symposium of Materials and Metallurgy in the 13th International Conference on Quality in Research (QiR) 2013 held in Yogyakarta, Indonesia, June 25-28 2013. This special issue is devoted as useful dissemination to serve the need for exchange the knowledge, experience, review of the progress and recent developments in the broad field of materials engineering and manufacturing. Studies presented in this book cover the following topics: (i) Advanced and Composite Materials; (ii) Polymer and Ceramic Materials; (iii) Materials Manufacturing and Processes; (iv) Corrosion and Degradation of Materials; and (v) Extraction of Materials.

目次

Editorial Note Chapter 1: Advanced and Composite Materials Atomic Layer Deposition of Inverse Opals for Solar Cell Applications The Influence of Various Percentage of Al2O3 by Using Vortex Method to Tensile Strength and the Distribution of Al2O3p Composite Modifications of Multi-Walled Carbon Nanotubes on Zinc Oxide Nanostructures for Carbon Monoxide (CO) Gas Sensitive Layer An Investigation of Structure and Complex Impedance Behavior of Composite (1-X)BA0.5SR0.5FE11.7MN0.15TI0.15 /XLA0.7BA0.3MNO3 Electrochemical Behavior of Li4Ti5O12 under In Situ Process of Sintering and Surface Coating with Cassava Powder Synthesis of Highly-Ordered TiO2 through CO2 Supercritical Extraction for Dye-Sensitized Solar Cell Application Deformation Behaviour of Silicon Carbide Reinforced Al-7Si Composite after Balistic Impacts Hydrogen Absorpsivity-Desorbsivity of Mg Doped by Ni, Cu, Al Produced by Mechanical Alloying Crystallite Growth Kinetics of BaFe12O19/SrTiO3 Based Composites Derived from Mechanical Alloying Crystal Structures and Thermal Properties of Bamboo Nanofiber Reinforced-Composite Friction Materials of Glass and Metal Wastes Formation and Characterization of MMCs Alloy Al-5%Cu-4%Mg/SiC(p) by Thixoforming Process Study on PbSn Composites Produced by Powder Metallurgy as Core Bullet Projectile Electroless Plating of Al2O3 Particles Reinforced Composites SrTiO3 Thin Films Deposition Using Pulsed Laser Deposition Technique Crystallite Size Characterization of Mechanically Alloyed of (Ba,Sr) Hexaferrite and (Ba,Sr) Titanate Composite System New Technique for Conceptual Selection of Manufacturing Process and Material, Case Study: Metal Matrix Composite Component Nanosize Effects on Magnetic Properties and Peak Shifting of X-Ray Diffraction Pattern of BaFe12O19 Produced by Sol Gel Method Quasi-Solid State DSSC Performance Enhancement by Bilayer Mesoporous TiO2 Structure Modification Microstructure and Phase Analysis of La0.8Ba0.2TixMn(1-x)O3 System for Microwave Absorber Material (x = 0 - 0.7) Crystallographic Properties of Aluminum-Doped Barium Zirconium Titanate Thin Films by Sol Gel Process Lead-Free Oxide Thin Films for Gas Detection Fabrication of Polymer Solar Cells on Flexible Substrate Magnetic Behaviors of BaTiO3-BaFe12O19 Nanocomposite Prepared by Sol-Gel Process Based on Differences in Volume Fraction Synthesis of Mesoporous Silica from Tetraethylorthosilicate by Using Sodium Ricinoleic as a Template and 3-Aminopropyltrimethoxysilane as Co-Structure Directing Agent with Volume Variation of Hydrochloric Acid 0.1 M Optimizing the Nanostructural Characteristics of Chemical Bath Deposition Derived ZnO Nanorods by Post-Hydrothermal Treatments Effect of CaO Dopant on the Dielectric Properties of NiO Numerical Modeling of Ship Composite-Based on Aluminum Casting as Alternative Materials for Ship Building High Coverage ZnO Nanorods on ITO Substrates via Modified Chemical Bath Deposition (CBD) Method at Low Temperature Quantum Approximation for Josephson's Tunneling in Thx DUO2 Nano Material for 535 Tesla at Muon Cyclotron Microstructural Characterisation and Microwave Absorption Characteristics of La(1-x)BaxFe0.25Mn0.5Ti0.25O3 (x = 0, 0.25, 0.75, 1) Performance of Natural Carotenoids from Musa aromatica and Citrus medica var Lemon as Photosensitizers for Dye-Sensitized Solar Cells with TiO2 Nanoparticle Synthesis and Characterization of Nanocrystalline TiO2 by Non-Aqueous Sol-Gel in Acidic Condition for Dye-Sensitized Solar Cells Removal of Heavy Metals from Aqueous Solution by Hydroxyapatite/Chitosan Composite Photocatalytic Degradation of C.I. Reactive Red 2 by Using TiO2-Coated PET Plastic under Solar Irradiation Synthesis of SnO2 Nanostructure Thin Film and its Prospective as Gas Sensors Preliminary Observation on Macro Texture of Nb3Sn Low Temperature Superconductor (LTS) Characteristics of Heat Treated Al7Si-Mg-Zn - 5 wt.% SiC Squeeze Casted Composite with Variation of Mg Content for Tactical Vehicle Application Reduction of Nickel Ion Release on a TiO2 Coated onto an Orthodontic Wire Properties of Fe-Mn-C Alloy as Degradable Biomaterials Candidate for Coronary Stent Synthesis and Characterization of Silica-Lavender Microencapsulation by Sol Gel-Emulsion Method for Anti Mosquito Textile Sensitive Layer Thickness Dependence on Microcantilever Sensor Sensitivity Biocompatibility Improvement of NiTi Orthodontic Wire from Various Coatings Synthesis and Characterization of Bacterial Cellulose-Based Carbon Nanotube by Catalytic Graphitization Synthesis and Characterization of TiO2 Nanoparticle Using Starch as a Template by Sol-Gel Method for the Application of UV Protection Building Materials Composition Influence to Sound Transmission Loss (STL) Reduction Contribution of Short Coconut Fiber to Pavement Skid Resistance Chapter 2: Polymer and Ceramics Classification of Ceramic Tiles by Identifying Defect on Ceramic Tile Surface Using Local Texture Feature Structural Characterization of Mullite-Based Ceramic Material from Al2O3 and Silica Xerogel Converted from Sago Waste Ash Correlation of Normal Incidence Sound Absorption Coefficient (NAC) and Random Incidence Sound Absorption Coefficient (RAC) of Polyester/Ramie Fibre Composite Materials A Study on the Structure of Novel Polyurethanes Derived from -Valerolactone-Based Diol Precursors Grain Growth in Millimeter Wave Sintered Alumina Ceramics The Dinamic Cyclic Trend Phenomena of Cement-Fly Ash Smart Concrete Compressive Strength and Resistivity in Various Composition of Polymer Carbon Fiber Preparation of the Edible Biocomposite Film Gelatin/Bacterial Cellulose Microcrystal (BCMC): Variation of Matrix Concentration, Filler, and Sonication Time Synthesis of Poly(1-vinyl-1,2,4-triazole) and Preparation of Proton Conducting Membrane for High Temperature Operation Characteristics of Environmental Friendly Labeled Plastic Shopping Bags in Indonesia Chapter 3: Materials and Manufacturing Processes SKD 61 Material Surface Treatment with Electric Discharge Machining Using Cu, CuCr & Graphite Electrodes and Dielectric Fluid Jatrophacurcas Application of Shot Peening and Shot Blasting to Increase Hardness and Depth of Nitride Hardened Layer to the Modified H13 Steel as Die Casting Die Materials Optimization of Multiple Performance Characteristics in the Wire EDM Process of AISI D2 Tool Steel Using Taguchi and Fuzzy Logic Characterization of Al-7Si-Mg-Cu Turbine Impeller Produced by Investment Casting Research on the Manufacturing of Steam Turbine Blade by Using Investment Casting Technology Mechanical Properties and Microstructure of Welded Dissimilar Metals Using Buttering & Non-Buttering Layer Comparison of Commercially Pure Titanium Surface Hardness Improvement by Plasma Nitrocarburizing and Ion Implantation Effect of Phenolic Resin and Alignment to the Quality of Prototype Composite Railway Brake Blocks Effects of Welding Parameters in Micro Friction Stir Lap Welding of Aluminum A1100 Preparation of Uranium Nitride from Uranium Metal through by Hydriding and Nitriding Process Simulation of Metal Flow to Investigate the Application of Antilock Brake Mechanic System in Deep Drawing Process of Cup Effect of Equal Channel Angular Pressing and Post Heating on Microstructure and Hardness of Cu-Zn 70/30 Materials Selection in Appropriate Technology Four Focuses in Design Thinking Study about Surface Hardening on Local Disc Brakes with Direct Current Plasma Nitrocarburizing Apparatus The Effect of Vertical Step Block Casting to Microstructure and Mechanical Properties in Producing Thin Wall Ductile Iron Resolving Individual Solute Levels of AA6061 through Multiple Sub-Ambient Temperatures Thermoelectric Power Measurements Effect of Rolling Direction to the Strength of a Thin-Walled Steel SHS Beam under Concentrated-Compressive Load and Bending Moment Optimization Design of Airfoil Propellers of Modified NACA 4415 Using Computational Fluids Dynamics Analysis of Micro-Channels Manufacturing of Acrylic Using Low Power CO2 Laser Thickness and Fiber Content Optimization in VARTM Method for High Speed Craft Vane-Turbine as an Energy Conversion in the Propeller Slipstream of Single Screw Ship Application of Al2O3 Nanofluid on Sintered Copper-Powder Vapor Chamber for Electronic Cooling Real-Time Monitoring System of Dieless Bellows Forming Using Machine Vision Springback Prediction Compensation and Optimization for Front Side Member in Sheet Metal Forming Using FEM Simulation Low Speed Electric Machine Used for Electric Generating from Savonius Windmill Physics and Chemistry Test on Aluminum-Based Composite Materials as an Alternative Material for the Manufacture of Brake Drum Oxidation Characteristics of Various Nickel Composite Coated on Ferritic Stainless Steel Chapter 4: Corrosion and Degradation of Materials Hot Corrosion of Aluminized 1020 Steel with NaCl Deposit Improvement of Stress Corrosion Resistance in Aluminum Alloy 7075 through Retrogression and Re-Aging Modification Behavior of CO2 Corrosion of API 5L X52 Steel in NaCl Solution under Turbulent Flow Condition Effectiveness of Myrmecodia Pendans Extract as Eco-Friendly Corrosion Inhibitor for Material API 5L Grade B in 3,5% NaCl Solution Influence of Intermetallic Inclusion to Brittle Fracture of Electric Motor Shaft AISI 1045 under Torsion Loading High Temperature Oxidation Behavior of Co-Based Coating at 800o C as Alternative Coating Material for SOFC Interconnect Contribution of Galvanizing Layer to Hydrogen Induced Cracking Failure of AISI 4140 Bolt for Padeye Fixing in Marine Environment Corrosion Inhibitor Performance with Presence of FeCO3 Film in CO2 Corrosion Environment under Fluid Flow Effect Corrosion of Concrete Using Portland Composite Cement and Rice Husk Ash under Simulated Acid Rain Environment Chapter 5: Extraction of Materials The Influence of Coal and Reduction Process Parameters in Producing Iron Nugget Sulfuric Acid Leaching of Bangka Indonesia Ilmenite Ore and Ilmenite Decomposed by NaOH Submerged Ultrafiltration for Minimizing Energy Process of Refinery Wastewater Treatment Anatase TiO2 Enrichment from Bangka Ilmenite (FeTiO3) and its Photocatalytic Test on Degradation of Congo Red Practical Isolation of Bullatacin from Annona muricata Leaves Extract Using an Open Column Chromatography Technique

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB14968343
• ISBN:
  • 9783037857571
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: xiii, 560 p.
• 大きさ: 24 cm
• 親書誌ID:
  • BA24926058