2[nd] International Conference on Sustainable Materials (ICoSM 2013) : selected, peer reviewed papers from the 2[nd] International Conference on Sustainable Materials (ICoSM 2013), March 26-27, 2013, Penang, Malaysia

著者

• International Conference on Sustainable Materials
• Zaki, Ruhiyuddin Mohd
• Pa, Faizul Che
• Darus, Murizam

書誌事項

2[nd] International Conference on Sustainable Materials (ICoSM 2013) : selected, peer reviewed papers from the 2[nd] International Conference on Sustainable Materials (ICoSM 2013), March 26-27, 2013, Penang, Malaysia

edited by Ruhiyuddin Mohd Zaki, Faizul Che Pa and Murizam Darus

（Advanced materials research, v. 795）

Trans Tech Publications, c2013

• : pbk

注記

[nd]: superscript

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). This volume covers all aspects of sustainable materials engineering on a fundamental and technological level, with focus on the materials recycling related industries. It addresses both technological and sustainability issues related with materials recycling and value adding waste or low-grade materials as well as reinforcing materials for products.

目次

• Preface and Committees Rate of Rare Earths Leaching in HCl, H2SO4 and HNO3 Short Review: Ceramic Foam Fabrication Techniques for Wastewater Treatment Application Impact of Controlled Hydrophobicity of the Organically Modified Silicates on the Properties of Biomedical Thermoplastic Polyurethane (TPU) Nanocomposites Influence of Rice Husk Ash on the Engineering Properties of Fired-Clay Brick Structural, Optical and Antibacterial Properties of ZnO Commercial Powder Grades The Effect of Titanium Oxide Content in Piston Coating on the Performance and Emission Characteristics of Bio-Diesel Fuelled C.I. Engine Effect of Carbon Nanotubes on Properties of Graphite/Carbon Black/Polypropylene Nanocomposites Analysis of Stress and Strain in ZnO Nanoparticle-Bi2O3-Mn2O3 Varistor Ceramics at Different Annealing Temperatures Wear Resistance Characteristic of Vegetable Oil Effect of Sintering Temperature on Silver-Copper Nanopaste as High Temperature Die Attach Material Synthesis and Characterization of Pure Magnesium / Bio-Glass Composite Effect of Anodizing Voltage on the Growth Kinetics of Porous Anodic Alumina on Al-0.5 wt% Mn Alloys A "Green" Rubber Compound for Making Tire Tread with Antistatic Feature Void Content Determination of Fiber Reinforced Polymers by Acid Digestion Method Identification of Limiting Friction Coefficient towards Improved Hip Prostheses Mechanical Properties of Dissimilar Welds between Stainless Steel and Mild Steel Fabrication and Characterization of Porous F-75 for Potential Application in Tissue Engineering Effect of Space Holder and Compaction Pressure on the Porosity of Sintered Copper Effect of Spot Welding Current and Cycles on the Mechanical Properties of Welded Galvanized Steel Sheets Sand Replacement Materials (SRM) in Sustainable Cement Composites
• A Concise Review Sustainable Porous Materials for Gas Adsorption Applications
• A Concise Review Characterization of Porous Aluminum Fabricated via Sintering-Dissolution Process (SDP) Fabrication and Characterization of Organic Light-Emitting Diodes Containing Small Molecules Blends as Emissive Layer Annealing Effect on Small Molecules Blend Organic Light-Emitting Diodes Biodegradability of Starch Based Films Blend with LLDPE and PVA Physical and Morphological Properties of Styrene Butadiene Rubber / Recycled Chloroprene Rubber (SBR/CRr) Blends Static X-Ray Scans on the Titanium Hydride (TiH2) Powder during Dehydrogenation The Development of Cement Composites Reinforced Coconut Fiber with Fly Ash Addition: Mechanical Properties and Fracture Behavior Effects of NR and Liquid NR Loading on Swelling Behaviour of TPU/NR Blends Performance of Surface Modification of Polyvinylidene Fluoride Hollow Fiber Membrane in Membrane Distillation Thermal Management of Electronic Components by Using Computational Fluid Dynamic (CFD) Software, FLUENTTM in Several Material Applications (Epoxy, Composite Material & Nanosilver) Characterization of ZnO Nanopowder and Antibacterial Response against Staphylococcus aureus under UVA Illumination Granular Activated Carbons Impregnated by Iron Oxide (Fe-GACs) for Simultaneous Adsorption and Photodecomposition of Methylene Blue in an Oxalate Solution A New Invention of Thermal Pad Using Sol-Gel Nanosilver Doped Silica Film in Plastic Leaded Chip Carrier (PLCC) Application by Using Computational Fluid Dynamic Sofrware, CFD Analysis Performance and Emission Characteristics of Diesel Engine Running on Blended Palm Oil Effect of Dolomite on Pyrolysis of Rice Straw The Comparison between Four PLCC Packages and Eight PLCC Packages in Personal Computer (PC) Using Computational Fluid Dynamic (CFD), FLUENT SoftwareTM Using Epoxy Moulding Compound Material (EMC) The Effect of Rotational Speed on Flow Behavior and Weld Properties in Friction Stir Welding of Pure Aluminum Structural Behaviour of Precast Lightweight Foamed Concrete Sandwich Panel (PLFP) with Double Shear Truss Connectors under Axial Load: Preliminary Result The Effect of Iron Fillings Waste Contents on the Attenuation Level of Anti-Radiation Shielding Concrete Alteration in the Microstructure of Fly Ash Geopolymers upon Exposure to Elevated Temperatures Effect of Buffer and pH on the Protein Extraction for Chicken Meat The Role of Direct Chilling, Retrogression and Reaging Treatment on Mechanical Properties of High Strength Aluminum Alloy Influence of Current Density on Porous Silicon Characteristics A Study on the Effect of Modified Electrolyte to the Formation of AAO Membrane in Anodising Process Structural and Morphological Studies of Cadmium Sulfide Nanostructures Synthesis and Characterization of Electroless Copper Coated SiC Particles The Thermal Expansion Behaviors of Cu-SiCp Composites The Influences of Cu-Coated SiCp on the Porosity and Thermal Expansion Behavior of Cu-SiCp Composites A Brief Review of Layered Rock Salt Cathode Materials for Lithium Ion Batteries Preparation of Cyclopentyl Trisilanol Silsesquioxanes - Modified Natural Rubber (CpSSQ(OH)3 ENR-50) Composite Hybrid in the Presence of HCL Acid Memristive Behavior of TiO2 Nanostructures Grown at Different Substrate Positioning by Immersion Method Characterization and Optimization of Heavy Metals Biosorption by Fish Scales Cucumis melo Rind as Biosorbent to Remove Fe(II) and Mn(II) from Synthetic Groundwater Solution Fabrication of Cu-SiCp Composites via the Electroless Copper Coating Process for the Electronic Packaging Applications Chrome Mask Design for Microfluidic Fabrication Preparation and Characterization of Polypropylene Biocomposites Reinforced Palm Fruitlet Fiber Effects of Calcium Carbonate on Melt Flow and Mechanical Properties of Rice Husk/HDPE and Kenaf/HDPE Hybrid Composites Stress Analysis and Failure Characterizations of V-Shaped Epoxy Adhesively Bonded Joint Substrate Temperature Dependence on Sputtered Titania Thin Film The Effects of Extraction Mediums on the Properties of Porous Epoxy Using Natural Rubber Latex as Void Template Effect of Deposition Time on Properties of ZrO2 Coating Prepared Using Electrolytic Method Long Physico-Chemical and Biological Monitoring for Treated Artificial Tidal Flats with Recycled Paper Sludge in Ago Bay, Japan Effect of Compatibilizer on Mechanical Properties and Water Absorption Behaviour of Coconut Fiber Filled Polypropylene Composite Short Review of Ultrafiltration of Polymer Membrane as a Self-Cleaning and Antifouling in the Wastewater System Effect pf Thermoplastic Polymer Waste (PET) in Lightweight Concrete Design and Fabrication of PDMS Microchamber for Fast Reaction Assays in Biosensing Application Effect of Zeta Potential of Stanum Oxide (SnO2) on Electrophoretic Deposition (EPD) on Porous Alumina Response of Functionality Graded Hydroxyapatite/F-75 in Saline Solution 0.9% NaCl Effect of Compaction Pressure on Microstructure and Properties of Copper-Based Composite Prepared by Mechanical Alloying and Powder Metallurgy The Mechanical Properties of PET Fiber Reinforced Concrete from Recycled Bottle Wastes Performance of Concrete Using Light Waste PET Fibre Relationship between Compressive, Splitting Tensile and Flexural Strength of Concrete Containing Granulated Waste Polyethylene Terephthalate (PET) Bottles as Fine Aggregate Effect of Fiber Treatment on the Fiber Strength of Kenaf Bast Fiber as Reinforcing Material in Polymer Composite The Effects of Dynamic Vulcanization in Virgin Polyethylene (vPE)/Recycled Polyethylene (rPE)/Ethylene Propylene Diene Terpolymer (EPDM) Blends: Thermal Properties and Swelling Behaviour The Effects of Carbon Black, Silica and Calcium Carbonate in Virgin PE/Recycle PE/EPDM Blends: Thermal Properties & Swelling Analysis Thermal Properties of Different Recycled Acrylonitrile-Butadiene Rubber Glove (NBRr) Size and its Blend Ratios on SBR/NBRr Blends The Effect of Different Sizes "Batu Reput" (Dolomite) as a Filler in SMR L and ENR-50 Microfluidic Photomask Design Using CAD Software for Application in Lab-On-Chip Biomedical Nanodiagnostics Mask Design Platform for Zinc Oxide Nanowire Growth Nanoelectrode Chrome Photomask Design and Specification for Biosensor Fabrication Electrical Properties Dependence on Substrate Temperature of Sputtered ZnO Nanoparticles Thin Films on Teflon Substrates The Properties of Recycled Copper Filled Epoxy/Unsaturated Polyester Composites Structural Behaviour of Precast Lightweight Foamed Concrete Sandwich Panel (PLFP) with Double Shear Truss Connectors under Eccentric Load: Preliminary Result The Effect of Sintering Temperature to the Properties of Zinc Oxide Effects of Winding Angles in Biaxial Ultimate Elastic Wall Stress (UEWS) Tests of Glass Gibre Reinforced Epoxy (GRE) Composite Pipes Tensile Properties LLDPE/Soya Spent Powder Blends: Oven Aging Thermal Properties of Linear-Low Density Polyethylene (LLDPE)/Soya Spent Powder Blends with the Addition of Epoxidised Natural Rubber The Existing of Oxygen Nonstoichiometry in Complex Lithium Oxides Comparison of Mechanical Properties of Polypropylene/Acrylonitrile Butadiene Rubber/Rice Husk Powder Composites Modified with Silane and Acetic Anhydride Compound Effects of Recycled-Aluminum Additions on the Mechanical Properties of Sn-0.7Cu/Cu-Substrate Lead-Free Solder Joints Thermal Properties of Sn-0.7Cu/re-Al Composite Lead-Free Solder High Temperature Creep and Hydrogen Embrittlement Failure of a Steam Trap Bypass Tube Numerical Simulation of Microfluidic Separators Determination of Interlayer Mixing and Oxygen Non-Stoichiometry in LiNi0.8Mn0.1Co0.1O2- Using Powder Diffraction Data Corrosion Behaviour of Anodised Powder Metallurgy Aluminium-Magnesium Composites Metallurgical Failure Analysis of a Closed Recirculation System Water Cooling Pipe Structure Refinement Strategy of Li-Based Complex Oxides Using GSAS-EXPGUI Software Package Overview of Pathogenic Micro-Organisms Destruction in Contaminated Water by Oxide Photocatalysis Failure Investigation on Rusty Mesh Strainer of Petrochemical Plant Joining of Dissimilar 6063 Aluminium Alloy - 316L Stainless Steel by Spot Welding: Tensile Shear Strength and Heat Treatment The Effects of Fly Ash and Polystyrene Bead Additions on Compressive Strength of Foamed Cement Composites Dielectric Properties of Barium Titanate with Different Stoichiometry Effect of Aging Time towards Intermetallic Compound (IMC) Growth Kinetics Formation for Sn-0.7Cu-Si3N4 Composite Solder on Copper Substrate Corrosion Performance of Reinforcement Bar in Geopolymer Concrete Compare with its Performance in Ordinary Portland Cement Concrete: A Short Review Effect of Sintering Time on the Properties of LaYO3 Doped with ZrO2 Solid Electrolyte Zn-Sn Based High Temperature Solder - A Short Review Effect of Aging Temperature on the Intermetallic Compound (IMC) Formation of Sn-0.7Cu/Si3N4 Composite Solder Flexural Analysis of Polyurethane Foam and Sandwich Composite Foam via Experimental and Finite Element CMethods Electrochemical Corrosion Behaviour of Mg-(Ca,Mn) Sacrificial Anodes Corrosion Behavior of Al-Cu-Ni-Y Alloys Electroless Ni-P-Cg(Graphite)-SiC Composite Coating on Cast AlSi Alloy Effect of Heat Treatment on Ni-P-Cg(Graphite)-SiC Composite Coated Cast AlSi Alloy Cure Characteristics and Hardness of Recycled Latex Catheter (LCr) Filled with Standard Malaysia Rubber (SMR L) Compounds Effect of Compost Medium on Oxidative-Linear Low Density Polyethylene/Soya Powder Blends Microstructural and Optical Properties of SnO Thin Film by Thermal Evaporation Designing Microchannels Separator Mask for Lithography Process Mechanism of Current Transport for a Photoelectrochemical Cells of ITO/Cu2O/PVC-LiClO4/Graphite The Effect of Sintering on the Properties of Powder Metallurgy (PM) F-75 Alloy Microstructure and Interface Analysis of Glass Particulate Reinforced Aluminum Matrix Composite Recycled High Density Polyethylene / Natural Rubber / Chicken Feather Fibers (RHDPE/NR/CFF) Composites: The Effects of Fiber Loading and Benzyl Urea on Tensile Properties and Morphology Analysis Mathematical Model of Elastic Crack Interaction and Two-Dimensional Finite Element Analysis Based on Griffith Energy Release Rate Effect of Process Parameters on the Cooling Performance of Liquid Cooling System for Electronic Application Machining Performance of Reinforced Alumina Insert in End Milling of AISI 1018 Steel Numerical Investigation of Heat Transfer of Twelve Plastic Leaded Chip Carrier (PLCC) by Using Computational Fluid Dynamic, FLUENTTM Software The Effect of Chemical Modification on Properties of Polypropylene/Bagasse Fiber Composites Compounding Using Two Roll Mill Growth of Vertically Aligned ZnO Nanorods Arrays by Hydrothermal Method Potential of Upgrading Domestic Biomass into a Higher Energy Density via Torrefaction Process Simulated Body Fluid Sorption and Solubility of Silica Reinforced Dental Resin Composites The Effect of Different Alkaline Treatment Condition on Flexural Properties of Kenaf Bast-Unsaturated Polyester Composite Production of Wollastonite from Local Resources Electrical Properties of Fresnoite Ba2TiSi2O8 Using Impedance Spectroscopy Characterizations on the Effect of Processing of Polymers Blend with Petroleum Coke (Part I) Organic Dye Degradation with TiO2 Catalyst/AAO Template in the Presence of H2O2 Electrochemical Measurement of PBS Using Cyclic Voltammetry and AAO Fabricated at Ambient Temperature and Low Potential Ferroelectric and Relaxor Ferroelectric to Paralectric Transition Based on Lead Magnesium Niobate (PMN) Materials Effects of Fly Ash Addition on Compressive Strength and Flexural Strength of Foamed Cement Composites Current Trend in Simulation: A Study Simulation of Poly-Silicon Nanowire Using COMSOL Multiphysics Kinetic and Thermodynamic Studies on Adsorption of Copper Ions onto Pomelo Peel (Citrus grandis) Alteration of Solution Treatment Condition to the Precipitation Behavior A319 Alloy Development of Nanocement Mortar as a Construction Material Effect of Silver Ions on the Structural and Antibacterial Properties of Bone Replacement Material Green Bricks from Waste Extraction of Silica from Palm Ash Using Citric Acid Leaching Treatment: Preliminary Result Study on Synthesis of Polypyrrole via Chemical Polymerization Method Effect of Milling Time on Particle Size and Surface Morphology of Commercial Zeolite by Planetary Ball Mill Preparation of Colossal Magnetoresistance Ploycrystalline via Sol-Gel Technique: A Short Review The Atomic Force Microscope Study of Self-Assembled Silicon Nanodots Growth Using Magnetron Sputtering System Formation of Gold Nanoparticles Film on Silicon Wafer by Self-Assembled Method Effect of Rice Husk on Fired Ceramic Shell Strength

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB14972373
• ISBN:
  • 9783037858110
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: xvii, 749 p.
• 大きさ: 24 cm
• 親書誌ID:
  • BA24926058