Advanced technologies in manufacturing, engineering and materials : selected, peer reviewed papers from the 2013 International Forum on Mechanical and Material Engineering (IFMME 2013), June 13-14, Guangzhou, China
Author(s)
Bibliographic Information
Advanced technologies in manufacturing, engineering and materials : selected, peer reviewed papers from the 2013 International Forum on Mechanical and Material Engineering (IFMME 2013), June 13-14, Guangzhou, China
（Advanced materials research, v. 774-776）
Trans Tech Publications, c2013
- : [set]
- Part 1
- Part 2
- Part 3
Available at / 1 libraries
-
Part 1A25118/774-1400065004,
Part 2A25118/774-2400065012, Part 3A25118/774-3400065020 -
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the 2013 International Forum on Mechanical and Material Engineering (IFMME 2013), June 13-14, Guangzhou, China.
The 406 papers are grouped as follows:
Chapter 1: Dynamic Systems, Vibration and Noise, Applied Mechanics;
Chapter 2: Design and Modelling in Manufacture, Dynamic Simulation, Machinery and Equipments;
Chapter 3: Fluid, Flow Engineering and Control Technology, Aerodynamics, Wind and Heat Engineering;
Chapter 4: Vehicle Engineering;
Chapter 5: Material Science and Technology;
Chapter 6: Material Processing Technology, Forming, Welding and Joint Technologies, Surface and Coating Engineering;
Chapter 7: Material Design and Experiment Researches Analysis, Testing and Evaluation;
Chapter 8: Advanced Manufacturing Technology and Mechatronics;
Chapter 9: Control Technology and Automation Systems;
Chapter 10: Sensors, Measurement, Detection and Intelligent Information and Data Processing, Fault Diagnosis;
Chapter 11: Communication and Signal Engineering;
Chapter 12: Computer and Information Technologies Applications in Industry and Engineering, Electric and Power Engineering Applications;
Chapter 13: The Internet of Things Technologies;
Chapter 14: Industrial, Management and Education Engineering.
Table of Contents
Preface and Conference Organisation
Chapter 1: Dynamic Systems, Vibration and Noise, Applied Mechanics
Topology Optimization of Passive Constrained Layer Damping on Plates with Respect to Noise Control
Structure Simulation Analysis of Piezoelectric Energy Harvesting Device
SRSM-Based Stochastic Model Updating Method
Study on Surface Radiation Noise of a Diesel Engine Based on FEM
Vibration Simulations of Double-Walled Carbon Nanotubes by Finite Element Method
Finite Element Analysis of Tandem Rubber O-Ring Sealing Structure at the End of Shaft
Simulation and Test for Nonlinear Dynamic Specialty of Rubber Mounting
Synthetical Dynamic Balancing of Mechanism Based on Optimization Simulation
Study on Self-Excited Vibration of Subsoiler-Soil System Based on Modal Analysis
The Research of Damping Adjustable Isolators Control Method
A Three-Dimensional Analysis Method for the Stability against Deep Sliding of Concrete Dam on Rock Foundation with Mud Layers
Study on the Mechanical Properties of Magnetorheological Elastomers
The Analysis of Aerodynamic Characteristics of the High-Speed Train in Different Railway Conditions under Crosswinds
Analysis of the Movement Trajectory of Blasting Flyrock in the Bottom of Open Pits
Research on Aerodynamic Impacts of Snow on Bridge Decks
Research on Influences of Wind Screens on Wind-Resistant Capability for Long Span Suspension Bridges
The Vibration and Modal Analysis of the Disc Brake
The Attenuation Trend of the Propeller Noise
Experimental Study of Short-Term Creep Characteristics Base on Step Loading-Unloading Method for Hard Rock
The Analysis on the Tribological Properties of TPU/PVC Blends under Oil Lubrication
The Analysis on the Tribological Properties of CR/EPDM Blends with Chrome-Plated Steel under Dry Sliding
The Residue Harmonic Balance Method for Duffing-Van Der Pol Oscillator with Fractional Derivative
Chapter 2: Design and Modelling in Manufacture, Dynamic Simulation, Machinery and Equipments
Analysis of Flexibility and Stability of Crane Telescopic Boom with Elastic Restraint and Second-Order Effect
The Geneva Mechanism Motion Simulation and Research to Improve the Design Method
Optimization Design of Locking Mechanisms of Small Arms
The Research of Pick Cutting Performance Based on the Fake Rock Wall of the Roadheader Experiment Station
Kinematic Analysis of the Slider-Crank Type Cluster well Pumping Unit (SCTCWPU) Based on Pro/Mechanism
The Three-Dimensional Modeling Method of the Deformed Flexspline with Involute Tooth Profiles
Design of Cigarette Universal Code Printing System
Fatigue Strength Check of Flexspline with Inner and Outer Gear Ring of the Micro Harmonic Drive
Study on the Gear Tooth Influence Coefficients of Flexspline of Harmonic Drive
Design of an Extrusion and Heat Setting Machine for Needled Filter Felts
Finite Element Analysis for Critical Components of Ultra-Precision Grinding Machine Tool
Optimization Analysis for Key Component of a Precision Optical Aspheric Grinding Machine
Optimization Design of Planetary Gear Transmission Mechanism of Traction Unit
Design and Optimization of Magnetic Levitation Actuators for Active Vibration Isolation System
Structure Design of Stamping Die Based on Topology Optimization and Shape Optimization
Supplement of Several Problems in Roller Chain Drive Design
Research on Case Similarity Method of Spade Punch Planter
Research on Reverse Engineering for Blades of Axial Compressors with Laser Scanner
Design and Calculation of the Cam Mechanism Profile Curve Based on MATLAB
Dynamic Simulation of Small Crawler Chassis Turning Based on RecurDyn
An Optimization Design Method for the Acceleration and Deceleration Curves of Detachable Ropeway
Simulation and Analysis of Rail Eddy Current Brake System of High-Speed Train
New Design of Supercritical Water Oxidation Reactor for Sewage Sludge Treatment
Thermal Analysis of CMT Structure
Use and Maintenance of CNC Machine Tools
The Design of Hydraulic Vibratory Fruit-Vine Separation System for Processing Tomato
Simulation Study on Biomechanics of Knee Joint in Running
Kinematics Simulation Study on a Manual Operation Sugarcane Loader with Metamorphic Function
Chapter 3: Fluid, Flow Engineering and Control Technology, Aerodynamics, Wind and Heat Engineering
Numerical Simulation on Aerodynamic Characteristics of Road Vehicles on Bridges under Cross Winds
Parameterized Modeling and Analysis of Wind Turbine Blade Using VB and ANSYS
A Parametric Experimental Study on the Heat Transfer Characteristics of Supercritical Kerosene in Active Cooling Channels of Scramjets
Numerical Simulation of Three-Dimensional Unsteady Flow Field in the Cyclone
Investigation of Three Dimensional Tidal Stream Energy in Surrounding Water Areas of ZTD, China
Analysing for Flow Field of Water Displacing Oil in Microscopic Pore
Flow Field Numerical Simulation and Performance Study of Two-Stage Superheated Electrical Steam Trap
Wind Tunnel Test of Honeycomb in Improving Flow Quality
Non-Steady State Moisture Diffusion Flow in Homogenous Pineapple Leaves Particleboard
Numerical Simulation of Bus Windshield Based on Heat Transfer with Impinging Jets
Influence of Regulating Seam on Aerodynamic Characteristics of Virtual Wind Tunnel
Mathematic Model of Displacement Control Unit for Screw Distributor of Asphalt Paver
Study on the Temperature and Pressure of Oxygen Cylinder Attached Grease in Filling Process
Experimental Research on Damage to Fracture Conductivity Caused by Fracturing Fluid Residues
Economic Benefit Analyses for Steam-Driven Induced Draft Fan on Basis of the Heat Balance Method
Study on Electromagnetic Vibration Pump
Numerical Calculation of Fluid Flow in a Continuous Casting Tundish
Numerical Simulation of the Gas Phase of Cyclone-Separator Sand Trap Based on ICEM CFD and FLUENT
Two New Flow Control Technologies Based on Vibration
Application of Bernoulli Equation in Fluid Mechanics
Flameless Venting Devices for Dust Explosions and Experimental Confirmation of their Efficiency
3D Wave Simulation Basing on VOF Method and Dynamic Grid Technology
Numerical Simulation of Influence of Oil Tank with Different Throat Areas on Mirror-Plate-Pump Performance
Effects of Liquid Properties on Acoustic Gas Bubble Radial Oscillation
Design of Pneumatic Transmission System Base on FSC Car of South China University of Technology
Characteristics Analysis of Hydraulic System for Screw Distributor of Asphalt Paver
Prediction of Remaining Useful Life for Used Gas Turbine Blades
Mathematical Simulation the Influence of Tundish with a Retaining Wall
Flow Behavior of Polymer Viscoelastic Fluid in Complex Channel
The Effects of Parameters on HRSG Thermodynamic Performance
Chapter 4: Vehicle Engineering
Determination of Load Capacity and Deformation for Modular Trailer
Design and Practice of FSAE Car Dynamic Data Acquisition System
Design of Bus Air-Conditioning Control System Based on PIC18F458
Comparison and Analysis on Side Impact Sled Test of Child Restraint System
Technology of Vehicle Multisystem Energy-Harvest Absorber
Multi-Objective Structure Optimization Design of a Car Lower Control Arm
Numerical Optimization Research on Rear Characteristic Angles Based on MIRA Model for Aerodynamic Drag Reduction
Study on Driving Safety of Refueling Truck
A Research on Modular Training System of Automobile Engine
Hardware in the Loop Platform with Brake-by-Wire and Steer-by-Wire System
Vehicle Stability Control Based on Generalized Predictive Contol
Transmission Ratio Research of Hydraulic Steering by-Wire System
Numerical Simulation and Wind Tunnel Experiment of the Aerodynamic Characteristics of a Formula Student Racing Car
Research on Approaches to Aluminum Alloy Automotive Wheels' Lightweight Design
Chapter 5: Material Science and Technology
Intensities of H and H in Hydrogen Plasma Spectrum with High RF Power Levels at ICP
Theory Study on Polarizability and Dipole Moment of WmBn(m+n 7) Clusters
The Standard Enthalpies of Formation of Energetic 4,5-dinitroimidazole derivatives: A Theoretical Study
Mathematical Models for Solid-Solid Phase Transitions Driven by Configurational Forces
Unloading Behavior Study on FRP-Concrete Interface under an Exponential Softening Law
Studies of Carboxyl-Functionalized Multi-Wall Carbon Nanotubes and Mechanical Properties of its MWCNTs-OPC Cement Composites
Pyrolysis Features of Larch Bark and Xylem
Effects of Polymerization Parameters on Aqueous Deposited Copolymerization of Acrylonitrile and Itaconic Acid
Electrochemical Study on the Bioleaching of Marmatite
The Mechanical Performance Degradation of Steels Effected by Corrosion
Magnetic States of Nanoparticles with RKKY Interaction
Tests on Effect of Gravity and Soil Density on Soil Cone Index
Preparation and Characterization of Magnetic Graphene Oxide
Mesoporous Silica Nanoparticles with Controllable Pore Size: Preparation and Drug Release
Immobilization of -Glucosidase on Modified Attapulgite
Water-Swelling Rubber Containing Small Amount of Nanofillers with Enhanced Water Swelling Durability
Failure Mechanisms of Nanoparticle Reinforced Metal Matrix Composite
A Study on the Start-up Period of Underground Infiltration System Treating Rural Domestic Sewage
A Review of Ferrates (VI) Oxidation of Organic Compounds
Preparation of Cr2O3-Al2O3-Cr Coatings on Carbon Steel by Aluminothermic Process Based on Cr2O3 and Al System
Experimental Study of High-Temperature Resistant Cementing Materials in Geological Exploration Drilling Tools
Novel Poly (butylenes succinate-block-1,3-propylene sebacate): Synthesis and Enzymatic Degradation
Study on Strain Hardening Property and Bake Hardening Property of High Aluminum Dual Phase Steel
Preparation and Characterization of Platinum Nanorods Using Ascorbic Acid as the Reducing Agent
Interaction Relationship for High Aspect Ratio Semi-Elliptical Internal Surface Cracks in CO2 Pipelines
Structural and Optical Properties of VO2 Thin Films Grown on Sapphire Substrates
Influence of Parameters on Microstructure of CePO4/ZrO2 Machinable Ceramics
The Temperature-Dependence of the Saturation Voltage for Molecular Assembly System with the Effect of the Intermolecular Spacing
The Preparation of CaO:Dy3+, Na+ Rare Phosphor by High Sofid-State Method
Synthesis of NaFeS2 Nanorods by Solvothermal Technique
Removal of Hydrophobic Organic Contaminants (HOCs) from Aqueous Solution by Biomimetic Fat Cell (BFC) - The Behavior of Lindane
Microwave Pre-Treatment Reduced the Browning of Peach Juice
Characterisation of the Precipitates in Aged Al-4.2Cu-1.5Mg Alloy
Mechanical and Morphology Properties of Polypropylene/ Nano-CaCO3 Composites
Synthesis of Triethynylborazine-Polyhydromethylsiloxane Copolymers and its Ceramization
Multiple Transfer Used on Repairing Transparent and Electric Film Based on CVD - Grown Graphene
Graphene Based Electrode Using in Rechargeable Lithium Ion Batteries
A Facile Approach to Synthesis and Modification of Nano-Alumina
Study of Nanoparticle Iron-Nitride MRF and its Rheological Characteristic
Effects of Mesophase Pitch Pre-Oxidation on Structure and Flexural Strength of 2D C/C Composites
The Contrast Study of Microwave Heating and Traditional Heating Leaching Vanadium from Stone Coal with Sulfuric Acid Solution
Enhancement of Acid Stability of Alpha Amylase from Bacillus licheniformis by Error-Prone PCR
Chapter 5: Material Science and Technology
Particles Movement Analysis of Rotary Kiln for Calcination of Selenium Dioxide Based on EDEM
Synthesis of Macroporous FeS2 Nanotubes and their Electrochemical Properties
Thermogravimetric Analysis of the Reduction of Iron Ore with Hydroxyl Content
Preparation of Tungsten Oxide Nanoplate Thin Film and its Gas Sensing Properties
Simulation of Polarization Effect in GaN/AlN Resonant Tunneling Diode
Fresh-Keeping Effect of Kojic Acid on Rape
Research on the Corrosion Behavior of TC4 Titanium Alloy by Scanning Kelvin Probe
Numerical Simulation of Binary Alloy Crystal Growth of Multiple Dendrites and Direcitonal Solidification Using Phase-Field Method
Research on the Simulation of Friction Material Surface Topography
An Applied Research of Automatic Detection Method for Maturity Degree of Viscose
Lamination of Green Ceramic Tapes with Adhesive at Ambient Temperature
Vertical Floating Zone Crystal Growth of R2PdSi3 Intermetallic Compounds (R=Pr and Nd)
Effect of Co-Doping on Iron-Based Oxygen Carrier for CO Oxidation in Chemical Looping Combustion
Study on Continuous Separation of High Concentration Cr (III) and Cr (VI) from Strong Acidic Aqueous Solution Using Strong Alkaline Anion Exchange Fiber Column
Adsorption to Cu2+ in Waste Water with Chitosan Intercalation Bentonite
Numerical Simulation on Two Phase Combustion Characteristic in Solid Rocket Ramjet Afterburning Chamber
The W Loading Effect on SCR deNOx Performance for V-W-Mo/TiO2 Catalyst
Double-Layered Cement Composites with Superior Electromagnetic Wave Absorbing Properties Containing Carbon Black and Expanded Polystyrene
Plasmon-Enhanced Cell Efficiency in Hybrid Solar Cell Based on CdS Nanorod and Poly (3-Hexythiophene)
14N NQR Study of Urea and Thiourea
Hysteresis Loops of Soft and Hard Magnetic Composited Wires
An Analysis of Degradation and Stability of Polyaniline Doped with Three Common Industrial Acids
Study on Site Measurement of Freezing Soft Aquifer in Cretaceous Strata
Investigation Stress-Strain Behaviors of Glass/Polymer Composites
The Deformation and Fracture of Skin under Insertion of Microneedle
Impacts of N, N'-diphenyl-1, 4-phenylenediamine (DPPD) Antioxidant Additive in Jatropha Biodiesel Blends to Reduce NOx Emission of a Multi Cylinder Vehicle Type Diesel Engine
Microstructure and Mechanical Properties of Mg-Zn-Ca-Zr Alloy for Biomedical Application
Preparation and Characterization of CMC-PVA/PVA-SA-MePc (COOH)8/CS-PVA Bipolar Membrane Using Electrospinning Technique
Effect of Specimen Preparation Method on Transmission Electron Microscope Investigation in a Bulk Metallic Glass
The Electrical Conductivity Stability of Polyaniline Doped with Three Different Acids
Rheological Properties of Rice Protein-Dextran Composite System
Spectroscopic Investigation of V3+:YAG Crystal
Tunneling Recombination Mechanism in n-Type a-Si:H Steady State Regime
Growth and Characterization of Vapor Deposited Polyimide Thin Films
The Study of Matching Flotation in Shandong Copper Mine
Study on the Mechanism of the Anodic Oxidation of PAN-Based Carbon Fibers by Cyclic Voltammetry
Electrical Properties Measurement of Rat Blood in 10 kHz-10 MHz
Analysis of Nano Luminescent Materials and Devices Based on Paper Intelligence
The Effect of Proton Implantation on Photoluminescence from Ensembles of InAs Quantum Dots Embedded in GaAs
Influence of Different Porosity of Dead-Man to Flow of Hot Metal in the Hearth of Blast Furnace
Effect of Tension on Mechanical Properties and Structure of Aramid Fibers during Heat Treatment
Growth of n-Doped and p-Doped GaAs Nanowires by Au-Assisted Metalorganic Chemical Vapor Deposition: Effect of Dopants Flux Rates
Effects of pH Value and Water Content of Sol on TiO2 Photocatalytic Activity Prepared by SAS
Synthesis of Novel Functional Materials for the Photo-Catalytic Reaction
Effect of Aging Treatments on Microstructure and Exfoliation Corrosion Behavior of Spray Forming 7075 Alloy
Effects of Low-Energy Electron Irradiation on Enhancement-Mode AlGaN/GaN High-Electron-Mobility Transistors
Vacuum Synthesis of Nanocrystalline TiC at a Low Carbothermal Reduction Temperature
Oxidation Kinetics and Oxide Scale Morphology of Fe-1.5Si Alloy
The Research Situation and Development Trend of Hadifield-Steel
Electrospun Polycaprolactone Fiber Mats as Carriers for Tannic Acid
Study on Enzymatic Synthesis of -Cyclodextrin with -Cyclodextrin
Effective Application of Magnetic Material Based on Metamaterial Absorber
Analyse the Influence Factors of Energy-Saving and Emission-Reduction in Asphalt Pavement Construction
Optimization of Microwave-Assisted Extraction of Polysaccharides from Panax japlcus Var
The Cascaded Effects in the Frequency Selective Surfaces Sculpted from Carbon Fabric Reinforced Epoxy Composite Panels Coated with Conductive Silver Paste
Preparation and Properties of poly (n-butyl acrylate)/ poly (methyl methacrylate-co-styrene) Emulsion Polymer with Pentaerythritol Triacrylate as a Cross-Linking Agent
A Concise Route to Fabricate TiO2 Nanoporous and Nanopillar Films Based on Block Copolymer Self-Assembly
Properties of Ba-Hexaferrite Thin Films with Different Layer Structures
Study on Properties of Lightweight Aggregate Concrete Characterized by Environment Protection
Numerical Investigation of Transverse Tensile Behaviors of Marine Composites under Different Strain Rates
Preparation and Research of Porous KGM/ Collagen II Composite Cartilage Scaffolds
Enhancement of Electrical Properties of ZnO: Al Thin Films on Transparent TPT Substrates by SiO2 Buffer Layers
A New Type of Surfactant in the Synthesis and Performance Evaluation
Structural and Electrical Properties of (Cu, Co) Co-Doped ZnO Thin Film
The Influence of High Magnetic Field on the Stability of CryoECAPed 1050 Alloy
Phase Evolutions in the Metallic Precursors of the Ternary Copper-Indium-Gallium System
Effect of NO2--N Concentration on Denitrifying Phosphorus Accumulating of Nitrosation Denitrifying Phosphorus Accumulating Organisms
Photoelectrocatalytic Activity of Cu2O Films Prepared on Different Substrates in Connection with TiO2 Electrodes
Theoretical Study of Energy Levels Splitting of Praseodymium-Doped Trichloride
Tribological Performance of PEEK Reinforced PTFE Composites under Dry Sliding Condition
Solvothermal Method Preparation of Nano Y2O2S:Eu3+ and Research of Luminescence Property and Cytotoxicity
Numerical Simulations of Uniaxial Tension Behaviour of Aluminum Single Crystal by Crystal Plasticity Finite Element Method
Preparation and Properties of Multi-Layer Composite Paperboard
Chapter 6: Material Processing Technology, Forming, Welding and Joint Technologies, Surface and Coating Engineering
Cutting Force Analysis in Micro Milling of Steel
Research on Effects of Accuracy in Variable Loading on the High-Pressure Water Jet Incremental Forming
Research on the Wear Characteristics of PDC Diamond Cutting Tools for Natural Granite
Effect of Orientation of Reinforcements on the Quality of the Machined Surface in Machining Aluminium Composites
Magnetic Field Interaction of Tiny Grinding Wheel Cluster Based on Magnetorheological Effect
Application of BP-GA Algorithm in Optimization of Process Parameters in Thin Strip Tandem Cold Rolling
Study on Dimension Change Law from CAD Model to Prototype of Rapid Investment Casting Based on Selective Laser Sintering
The Influence of GGG70L Laser Surface Hardening Power on Quenched Layer Performance
The Craftwork Analysis of Centrifugal Pouring for Copper-Lead Alloy Bearing Shell
The Effects of Heat Treatment on Microstructure and Mechanical Properties of AISI 4140 for Base Cutter Cane Harvester
Prediction of Cutting Force of Austempered Ductile Iron Based on BP Neural Network
Comparative Research on the Grindability of Ti-6Al-4V and PTMCs with WA Wheel and CBN Wheel
Study on Undercut Characteristics of Die Steel in Spray Etching
Study on Influence of Skill Level on Tool Wear during Feed Mode Change in Lathe Work
Analysis and Experiments on the Plastic Limit Load of Elbows under Combined Pressure and In-Plane Closing Bending Moment
Improvement of Surface Properties of Magnetic Shaft Material Inconel718 by HVOF Spray Coating of WC-CrCNi Powder
Study on Surface Properties of PAN-Based Carbon Fiber Oxidized in a Static Electrochemical Oxidation Process
Precision Grinding Process Design of Twin-Screw Compressor Rotor
Application of Cutting Fluids with Ultrasonic Treatment in Metal Cutting
Formation of the Stress Field in the Vicinity of a Single Defect under Shock (Impulse) Loading
Strengthen Experimental Study of High Strength Steel 40CrNi2Si2MoVA Based on Laser Shock Processing
Mechanism Analysis of Magnetic Control High-Speed Welding Undercuts Disappear
Influence of Rare Earth on Hot-Dipped 55%Al-Zn Alloy Coating
Research on Technology Test of 304 Stainless Steel Super Long Deep-Hole Drilling
Measurement of the Oxide Film on Cold Rolled Steel by XPS and TEM
Net-Shape Forming of a Roof Joint Node by Thixoforming of A357 Aluminum Alloy for a Low Speed Electric Vehicle
Microstructure and Properties of Dissimilar Metals Welded Joint of New Tamping Tine Steel for Railways Maintenance
Thermo-Mechanical Modelling of Friction Stir Welding Process
A New Grinding Heat Flux Distribution Developed by Theoretical Derivation
Research of Wear Mechanisms of PCD Cutting Tools in Sand Mold Milling
Evolution Regularity of Temperature Filed in Hot Power Backward Spinning for 7075 Cast Aluminium Alloy Tube
Off-Line Feed Rate Scheduling Based on a Mechanistic Cutting Force on Discrete Segments during End Milling
Decarburization Depth Control Technology Research and Application for U71Mn Rail
Study on the Shape Distortion of Sheet Inner-Concave Flanging
Study of the Effect of Hot Gas on Atomization Quality of Spray Forming
Research on Old Asphalt and the Regeneration Agent Compatibility Test
Experimental Analysis of Hardness Distribution of the Transition Region in Tailored Tempering Stamping of Ultra-High Strength Steel
Study on Processing Parameters of Supersonic Particles Bombarding Treatment
Load Distribution Optimization of Tandem Cold Mill Based on Quantum Chaos Multi-Objective Evolutionary Algorithm
Fracture Accident Analysis of Drill Pipe Friction Welding Joints
Chapter 7: Material Design and Experiment Researches Analysis, Testing and Evaluation
Effects of Ceramic Particle Reinforcement Distribution on the Penetration of FGM Armor
Experimental Study on the Influence Factors of Static Aerodynamic Characteristics of Ice-Coated Commonly Used Conductors
Study on Urea-Formaldehyde Resin for Glass Wool Products
The Effect of Nanometer Polysilicon Material on Properties of Wax-Diesel Oil Systems
Impact Behaviour of Woven Natural Silk Composite Face-Sheet Sandwiched Foam under Low Velocity Impact
A Method of Evaluating Carton Black's Dispersion Based on Standard Images
A Method of Evaluating Carton Black's Morphology Based on Convex Hull
The Manufacture of Spherical WC Powder in Plasma
Morphological Analysis of Particles in Transmission Electron Microscopy Image Using Image Processing
A Study into the Influence of Material Characteristics on Book Binding Design
Lightweight Material: Aluminium High Silicon Alloys in the Automotive Industry
Study on Application of Hydrated Calcium Silicate in Paper from Wheat Straw Pulp
Experimental Study on Mechanical Properties of Heated Granite under Different Cooling Ways
Developing the Yarn-Dyed Poplin Shirt Fabric with High-Count and High-Density and Softness by Using Water-Soluble Fiber
The Design and Production of Bamboo Pulp Silver Fiber/Cotton Antibacterial Fabric
Research on the Strands Fracture Caused by Poor Compression in the Strain Clamp
Optimized Analysis of Orthogonal Experiment of Continuous Casting Powder Components Based on Matlab
Design of a Testing System for Strength of Ceramic Sintering
Behavior of Thin-Film-Type Delamination of Layered Composite in Post-Buckling
A Method of Eliminating Ice on Wind Turbine Blade by Using Carbon Fiber Composites
Effect of Moisture Absorption and Fiber Ply Orientation for Artificial Hip Joint on the Mechanical Properties of Carbon/PEEK Composites
Design of Artificial Hip Joint by Carbon/PEEK Composites
Study on Properties of Extraction Palladium(II) with the New Synthesized Material
Chapter 7: Material Design and Experiment Researches Analysis, Testing and Evaluation
Laser-Ultrasound Testing of Cracks in Porcelain Insulator
Chapter 8: Advanced Manufacturing Technology and Mechatronics
Motion of Digital Precision Forming Machine without Pattern Casting and Tool Path Simulation Based on VRML
Improving of Manufacturing Systems in Slovak Industrial Enterprises
Research on Dynamics of a Three-DOF Parallel Manipulator for Levelling Mechanism
Digital Human and New Type of Man-Machine Coordinated Digital Shop Manufacturing System
Manufacturing Resource Ontology Modeling Techniques Based on Carrier
Quantum Harmony Search Algorithm for Assembly Sequence Planning of Design Knowledge Resources in the Cloud Manufacturing Environment
Forecasting the Success of Implementing Advanced Manufacturing Technology
A Balancing Mechanism for an Anthropomorphic Robot
Autonomous Navigation System Based on GPS for Agricultural Vehicles
Study of Low-Load Industrial Robot
Microwave PDC Drill Bit
Research on Rapid Manufacturing Technology of Complicated Casting Mold without Pattern
Analysis and Research on Construction Technology of Air Return Inclined Shaft Crossing Formation on Special Conditions
Application and Development of Ship Welding Material
The Introduction of COREX Process Development
Influence of Collapse Phenomenon on Unburned Pulverized Coal in the Lumpy Zone of COREX Melter Gasifier
Efficient Method for Tool Path Generation Based on Region Intersection for Complex Mesh Surface Machining
Numerical Investigation Based on Orthogonal Design of Structural Parameters on Large-Diameter DTH Hammer Bit
The Optimization of Production and Drainage of CMB for Multi-Branch Horizontal Well
Chapter 9: Control Technology and Automation Systems
Automated Technology Research on Fully Mechanized Mining of Thin Coal Seams
Computer Numerical Control Machine Tool and its Development Trend
Automatic Control of Teaching Experiment System Based on the Network
Study on Speed Control Method
Automated Feeding System for Meat Pigeon Based on STM32
Research and Application of Self-Tuning Control System Platform
The Design of PID Control System which Based on the STM32
Design of Flight Test System Based on 1553B-Bus Real-Time Processing System
Control Strategy of Non-Road SI Engine's Vibration
A New Timing Method Based on PLC Scan Cycle Time and its Application in Automatic Marine Power Station
Winter Jujubes Automatic Sorting Equipment Based on Photocell
Chapter 10: Sensors, Measurement, Detection and Intelligent Information and Data Processing, Fault Diagnosis
Information Fusion of the Vibration and Acoustic Signals Based Rolling Bearing Incipient Fault Diagnosis Method
Novel MEMS Switch Topology and Nanosensor Package for Multi-Analyte Chemical Detection
Study on Recognition Method of Ferrographic Debris Based on Neural Network
Research of LED Chips Positioning System
Directional Pattern Measuring System Research of a TT&C Antenna
The Design of Pigeonry Environment Monitoring System Based on ZigBee
A Novel Image Fusion Based on Nonsubsampled Contourlet Transform
Feature Subset Selection Based on the Genetic Algorithm
On-Line Measurement of Fiber Temperature along Spinning Line Using Monochromatic Infrared Thermometer
The Intelligent Ultrasonic System for Quality Testing of Weld Connections in Turbine Runners
A Survey on Coverage Control Technology in Wireless Sensor Network
An Improved Fast Algorithm of Spacecraft Separation Distance Calculation
Survey of Support Vector Machine in the Processing of Remote Sensing Image
Obstacle Detection of Autonomous Land Vehicles for Geological Prospecting
The Study on Diaphragm's Mechanical Properties of Hot-Film Air Flow Sensor
Multi-Frequency Heterodyne Phase Shift Technology in 3-D Measurement
Study on Crane Structural Health Monitoring and Early Warning Expert System
Research of Imaging and Inversion of Seismic Attribute
Software System Development of Crane Structural Health Monitoring
A Construction of Fault Test Constraint Based on the Optimal Fusion Set of Multiple Slices
Measurement of Cobalt Gradient in Functionally Graded WC-Co Composites
Multiple Reflection Cancellation Using High Order Statistics Adaptive Filter for Scattered Triangulation Laser Displacement Sensor
An Automatic Barn-Entering System for Grains
Design of a Hand-Shape Image Acquisition System Based on DM642
An New Image Feature Based on ROLD
Handwritten Character Recognition Based on a Multiple Fermat's Spiral
Research on Feature Extraction Method for Handwritten Chinese Character Recognition Based on Supervised Independent Component Analysis
Residential Extraction Based on Joint Feature of Spectrum and Spatial
The Application of RFID at Leasing Management of Coal Mining Equipments
RFID Technology-Based the Railway Package Management Platform Design
Chapter 11: Communication and Signal Engineering
Energy-Balanced Routing Method for Wireless Cooperative Wireless Network
GPS Multipath Estimation with Improved SNR Adaptation Performance Utilizing Adaptive Filters
Carrier Modulation Technology Based on Orthogonal Frequency Division Multiplexing
Design and Analysis of a Novel Capacitive RF MEMS Switch with Folded Beam
Application of Numerical Analysis in Improved Threshold De-Noising Method of SEMG
Study of Dynamic Spectrum Access Scheme in HD Radio
Experimental Evaluation of Networked Munitions Communication and Localization
Spreading of Partially Coherent Sinh-Gaussian Beams in Slant Atmospheric Turbulence
Convolutive Blind Separation Using Domino Effect Relevance Ranking
Performance of MIMO and 64QAM Application in HSPA+ System
Software Method for the Signal Processing of Grating Based on SCM
The Spectral Gain Characteristics of Optical Fiber Weak Light Pre-Amplifier Based on Raman Effect
Chapter 12: Computer and Information Technologies Applications in Industry and Engineering, Electric and Power Engineering Applications
Effects of the Internal Structure of H Boolean Functions on Algebraic Immunity and Algebraic Degree
A Spatial Resource Top-K Query Algorithm in Cyber Physical System
A User's Profile Model for Cloud Computing Service
The Discussion of Appling Parametric 3D Modeling in Urban Design Based on Cityengine
Comparison of the Function Regression Method and Data Classification Method for Limit State Function Approximation
Using the Pairing Function for Distributed Access Control in Cloud Computing
A System Hierarchical Method Based on Self-Resolving Message Protocol
Marketing Model Investigation of Cable Television Service Based on BP Neural Network and Decision Tree
On Relationship of some Cryptographic Properties for Weight Symmetric H Boolean Functions
Research on Situated Reconstitution of Non-Manifold Polyhedral from Function-to-Form Mapping
Research on the Initial Value of the Simulated Annealing
Research and Application of OPC Network Communication in Configuration Software
Overlapping Raindrop Particle Image Segmentation Algorithm Based on Boundary Geometrical Characteristics
Research on the Construction of Service Mode in University Mobile Digital Library
Optimized Tourism Destination Selection Based on InLinPreRa
Research of Mobile Learning System for Music Appreciation Class Based on Cloud Computing
Study on Knowledge Services Based on Multi-Media Data Mining
The Effect of SVC on Gansu Hexi Grid Static Load Margin by BPA Modeling and Simulation
A Web Information Extraction Method Based on HTML Parser
The Processing and Analyzing of Non-Structured Data in Digital Investigation
CUDA Parallel Computing Combined with OpenGL Interoperate
A Briefest Feature Subset Selection Algorithm Based on Preference Attribute
The Exponent Set of a Class of Two-Colored Digraphs with One Common Vertex
Comparison between Normalized Databases Implemented with Different Database Systems
An Algorithm for Global Multi-Resolution Terrain Simulation Based on the Method of Hash Table
Query Expansion Based on Books Tags of User's Social Relations in XML Book Search
A Genetic Algorithm Enhanced by Tabu Search for the Single Machine Scheduling Problem with Deteriorating Jobs
Grey-Hierarchy Relation Analysis and Evaluation of Port Operating Ability
A Portable Weather Station Design Applied in the Smart City
The Visualization of Soil Moisture Based on VB and Surfer
An Algorithm to Detect Noised Pixel in Image
Tollerance Coefficients of Stability in Linear Dynamic System Calculated in Matlab Environment
Optimal Reactive Power Compensation in Power System Considering SVC
Simulation of Nonlinear Transformer on Open and Short Circuit
Multitask Fuzzy Learning with Rule Weight
A New Method to Optimize Locations of SVC Based on Risk and Static Load Margin
Optimization Models Based on Line Loss Post Management in Power System
Chapter 13: The Internet of Things Technologies
Building Information Architecture of the Internet of Things
A Healthcare Service System Based on Internet of Things
Computational Trust in Cloud Manufacturing
Establishment of E-Cooperative-Research-and-Development-Work Platform for Knowledge Alliance
Magnetic Suspension Research and Design of Real-Time Display Based on the Internet of Things
The Design of Smart Alcohol Testing System Based on Internet of Things
Chapter 14: Industrial, Management and Education Engineering
Rapid Layout Design System Research and Application for Beverage-Packaging Production Line
Airline Safety Risk Evaluation Based on Factor Analysis
Research on Business Process Management System Based on SOA
Interest Distribution Model Based on the Line Loss Management in Distribution Network
Seamless Safe Supervision System of Edible Agricultural Products
Study on the Development of Energy Management in Iron and Steel Enterprises Based on Circular Economy
Measuring the Satisfaction of Implementing Assistive Input Devices for Disabled People with InLinPreRa
Design of Products and Processes: A Perspective from the Pyramid Model of Value System
Analysis of Chinese CNC Machine Tool Industry Based on Patent Intelligence
Some Simulation Results on Bullwhip Effect in Supply Chain with Several Dealers
Mobile Adverting: The New Promising Marketing Channel
Research on the Recycling Question of Electronics Manufacturers Implementing EPR Based on Differences in Consumer Demand
Research on the Optimization Path of Regional Tertiary Industry from E-Commerce Perspective - In the Case of Fujian Province
The Research on Pricing Customizing Services of Logistics Information Platform
Precision of Weights in Weapon Estimating
Research Progress of Quantum Dot Intermediate Band Solar Cell
Analysis of NPD Performance Based on a Meta-Analysis and Structural Equations Modeling Examination
Quantitative Study on the Risk Level of Human Factor for Drilling Process
by "Nielsen BookData"