Ultrafine grained and nano-structured materials IV : selected, peer reviewed papers from the 4[th] International Conference on Ultrafine Grained and Nano-Structured Materials (UFGNSM 2013), November 5-6, 2013, Tehran, Iran
Author(s)
Bibliographic Information
Ultrafine grained and nano-structured materials IV : selected, peer reviewed papers from the 4[th] International Conference on Ultrafine Grained and Nano-Structured Materials (UFGNSM 2013), November 5-6, 2013, Tehran, Iran
（Advanced materials research, v. 829）
Trans Tech Publications, c2014
- : pbk
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
[th]: superscript
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The present volume contains 175 selected papers from the 4th International Conference on Ultrafine-Grained and Nano-structured Materials (UFGNSM2013). This is the fourth biennial conference in UFGNSM series, jointly organized by Center of Excellence for High Performance Materials (CEHPM), University of Tehran, IRAN and University of Patras, GREECE. This volume presents a selection of papers submitted to the conference from universities and industries. These papers cover various aspects of ultrafine grained and nanostructured materials including: novel approaches to produce ultrafine grained and nanostructured materials and related properties, nanoparticles processing, nanostructure control, nanocomposites, nanocoatings and thin films, ultrafine grains and nanostructures characterization, simulation and modeling, and energy applications.
Table of Contents
- Preface, Conference Organizers and Sponsors Chapter 1: Bulk Nanostructured Materials Evaluating the Flow Properties of Ultrafine-Grained Materials Hot Deformation Behavior of Ultra-Fine Grained Pure Ti A Novel Severe Plastic Deformation Process for Shear Deformation and Grain Refinement of Bulk Materials Nanocrystallization and Mechanical Properties of Rapidly Solidified Amorphous Al86Ni6Y6Ce2 (at.%) Alloy Investigating on the Reverse Transformation of Martensite to Austenite and Pseudoelastic Behavior in Ultrafine-Grained Fe-10Ni-7Mn (wt %) Steel Processed by Heavy Cold Rolling High Loading of SiO2 Nanoparticles to Investigate Optical and Mechanical Properties of Polyurethane Open Cell The Effect of Process Parameters on Pulsed Nd:YAG Laser Welding of Inconel 625 Effect of Rubber Modification on the Morphology and Properties of Novolac Nanostructures Preparation of Shaped Carbon Nanotube Composites with Porous Structures Interfacial Examination of Cu/Al Joints Using Ultrafine Al-Si Powder as Brazing Filler Metal Microstructural Characterization of Nanostructured Al-Zn-Mg-Cu Alloy during Mechanical Alloying and Subsequent Annealing Effect of Heat Treatment on Mechanical Properties of ECAPed 7075 Aluminum Alloy Production of Nanostructured Ni-Ti-Ag Alloy by Mechanical Alloying Characterization and Mechanical Properties of PM Fe-Cu/SiCp Alloys The Effect of Quenching Rate on Structure and Soft Magnetic Properties of High Bs Fe-Based Nanocrystalline Alloys Fabrication of Carbon Nanotube Granules as Pd Catalyst Supports for Hydrogenation of Carbon-Carbon Triple Bond Effect of Equal Channel Angular Pressing on the Microstructure and Mechanical Properties of AISI Type 304 Austenitic Stainless Steel Chapter 2: Characterization of UFGNSM Synthesis and Characterizations of Highly Efficient Copper Nanoparticles and their Use in Ultra Fast Catalytic Degradation of Organic Dyes Optimizing Mechanical Properties of a 0.3C-1.5Si-3.5MnQuenched and Partitioned Steel Phosphorus Distribution in Electrodeposited Ni-P-Diamond Composites Influencing Structure and Mechanical Properties Free Volume Study of Severely Plastic Deformed Pure Fe Effect of Milling Time on the Formation of NiAl Nanostructure Intermetallic Produced by the Mechanical Alloying Process Preparation and Characterization of Polystyrene/TiO2 Core-Shell Nanospheres via Suspension Technique Synthesis of Nano Alumina by a Novel Combustion Method Effect of Annealing Heat Treatment on the Microstructural Refinement of Pure Copper by Friction Stir Processing Transient Liquid Phase Bonding of Alumina to Alumina via Bismuth Oxide Interlayer Effect of Heat Treatment on the Phase Transformation from SnS to Pure SnS2 Low Temperature Synthesis of a Stable Compound of Magnesium Aluminum Titanate Using Microwave Heating Influence of Fuel and Condition in Combustion Synthesis on Properties of Copper (II) Oxide Nanoparticle Processing of Al/SiC/TiB2 Hybrid Nanostructured Composites by Underwater Shock Wave Consolidation Synthesize and Investigation of the Catalytic Behavior of Ir/ -Al2O3 Nanocatalyst Development of Nano-Structure Cu-Ti Alloys by Mechanical Alloying Process An Investigation on the Effect of the Catalyst on Physical Properties of Silicon Oxide Nanostructures Prepared by CVD Technique Study on the Wear Behavior of Ultrafine Grained 304L Stainless Steel The Effect of Solvent on Drying Shrinkage of Novolac Xerogels Synthesis & Study of Nano Size Copper Oxide Particle via Chemical Method Chapter 3: Modeling and Simulation of UFGNSM Modeling of Nanostructured Palladium Anode in Solid Oxide Fuel Cells A Mimetic Amorphous Active Carbon Model Using Molecular Dynamics Simulation Why and How the Zigzag Edge of Suspended Graphene Sheet where Deformed Design and Simulation of a Proposed Position Sensitive Nano Gas Detector Finite Element Simulation of a Novel Nano 3D Semiconductor Detector Fabricated by Anodizing the Aluminium Efficiency Increasing of Thermoelectric Micro Generator Using Carbon Nanotube Interface Numerical Study of the Zinc Oxide Nanowire Geometry Effect on Nanogenerator Output Simulation of a Gas Electron Multiplier Detector for Hard X-Ray Imaging with a Novel Nano Converter Frequency Analysis of Nano Sandwich Structure with Nonlocal Effect Macro-to-Nano Scale Modeling the Effect of Surface Energies on Surface Melting Phenomena in Metallic NanoTubes/Wires Chapter 4: Nanobiomaterials Metal Organic Framework [Zn2(1,4-bdc)2(dabco)]n as Drug Delivery System Preparation of Mesoporous Silica Nanoparticles for Insulin Drug Delivery Structural Changes in Poly(lactic acid)/Hydroxyapatite Nanocomposites by Gamma Irradiation Nanosecond Pulsed Laser Heating of Colloidal Copper Nanoparticles in Water Synthesize and Characterization of Hollow Hydroxyapatite Nanopowders with Different Morphologies: Role of Cationic and Non-Ionic Surfactants PEG Decorated Glycine Capped Mn-Ferrite Nanoparticles Synthesized by Co-Precipitation Method for Biomedical Application Evaluating the Effects of Different Plasticizers on Mechanical Properties of Starch/ Clay Nanocomposites The Effect of Ultrasound Wave on Levothyroxine Release from Chitosan Nanoparticles Evaluation Nanostructure Properties of Bioactive Glass Scaffolds for Bone Tissue Engineering Antibacterial Properties of CdO Nano-Cubes Synthesized via Microwave Method The Synthesis of Methylene Blue Photosensitiser Conjugated with Gold Nanoparticles Enhanced Photoluminescence Effect of Poly(L-lactide) Biodegradable Polymer with Functionalized Carbon Nanotubes In Vivo and In Vitro Evaluation of Poly(lactide-co-glycolide)/Bioactive Glass Nanocomposite Coating Investigation of HA Nanocrystallite Size Crystallographic Characterizations in NHA, BHA and HA Pure Powders and their Influence on Biodegradation of HA Mechanical Properties Improvement of Porous Titanium-Bioglass Nanocomposites by Mechanical Alloying Chapter 5: Nanocoatings and Thin Films Numerical Modeling of Functionally Graded Coatings Fabrication of CoFe/BaFe12O19 Magnetic Nanocomposite Thin Films by Electrodeposition Electrodeposition of Gold and Polypyrrole Thin Films for Neural Microelectrodes Sintering Characterizations of Ag-Nano Film on Silicon Substrate Synthesis of Nanostructured Zinc Oxide Thin Films by Anodic Oxidation Method On the Dependence of Mechanical and Tribological Properties of Sputtered Chromium Nitride Thin Films on Deposition Power Characterization of CIGS Thin Films Fabricated from Nanoparticles under Selenization Process Study on the Hydrophobized Changes in Wettability of Sol-Gel Synthesized Nano Titanium Dioxide Films Characterization of Nano-Structured Tin Oxide Film Prepared by Anodic Oxidation Process Study on the Fabrication of Superhydrophobic Microporous Polypropylene Flat Membrane Using In Situ Synthesis of Modified Fluorinated Silica Nano Particles Nano Hydroxyapatite as a Corrosion Resistant Coating of AZ31 Magnesium Alloys Electrolytic Coloring of Anodized Aluminum by Copper Synthesis of Nano Structured Membrane from Carbon Nanotube for Waste Water Treatment The Effect of Cu Doping on LPG Response of the SnO2 Nanostructure Layer Effect of Rapid Thermal Annealing on the Structural and Magnetic Properties of Nanostructured FePt Thin Films Effect of Introducing Free Gaseous Radicals of Trichlorosilane and Ammonia Precursors on Growth and Characteristics of LPCVD a-SiNx Ultra Thin Films Effect of Pulse Electrodeposition on Properties of Nanocrystalline Nickel Coatings Magnetic Nanoparticles Supported Binuclear Manganese(II) Complex via Covalent Interaction: A Highly Efficient and Reusable Catalyst for the Epoxidation of Cyclohexene Direct Growth of ZnO Nanorods on Zinc Substrate via Hydrothermal Method Challenges Regarding to Usage of Nanostructured Materials in Contemporary Building Construction Effects of Anodic Oxidation in Ethylene Glycol Based Electrolyte on the Corrosion Resistance and Biocompatibility of NiTi Shape Memory Alloy Phosphate-Free Protective Nanoceramic Coatings for Galvanized Steel Sheet with H2O2 Additive Possibility of Growing Alloy Thin Film by Using Prepared Alloyed Powder in Electron Gun Deposition Technique Effect of Catalyst Type on Structural, Morphological, and Optical Properties of SiO2 Thin Film Applied by Sol-Gel Method Effect of Current Density on Microstructure of Mn-Cu Thin Films via Electroplating Coating Technique The Synthesis of Graphene Sheets Using Sodium Dodecyl Sulfate (SDS) as a Surfactant
- An Electrochemical Process Polyamide Decorated Graphene Sheet as a Potential Antimicrobial Agent: Synthesis, Characterization Fracture Toughness of TiN Coating as a Function of Interlayer Thickness Effect of Powder Particle Size and Substrate Hardening on the Formation of Nanostructured TiC Coating on AISI-D2 Steel by Mechanical Milling Mechanical Behavior and Properties of TiN/TiC Coating Using PACVD Increasing the Performance of Machinery Tools by Super Hard Nanostructured Materials Reinforced with Nanoporous Aluminium Oxide Electrochemical Behavior of S-Doped Nanostructured TiO2 Layer Synthesized with PEO Process for Photocatalytic Applications The Effect of Changing the Vapor Flux on Physical Properties of Nanocrystaline CdTe Thin Film, Prepared by Thermal Evaporation Method Influence of Nitrogen Gas Flow on Mechanical and Tribological Properties of Sputtered Chromium Nitride Thin Films Chapter 6: Nanocomposites Effect of SiC Nanoparticles Content and Milling Time on the Characteristics of Al/SiC Nanocomposite Powders Produced via Mechanical Milling A Study on Electrospun Nanofibrous Mats for Local Antibiotic Delivery Characterization of Ni-CNTs Nanocomposites Produced by Mechanical Alloying Synthesis of Nickel/Ba-Hexaferrite Magnetic Nano-Composite via Mechanical Alloying Route Liquid Phase Surface Treatment of Ti-6Al-4V Titanium Alloy Pre-Sprayed with TiC/Ni Using Pulsed Nd-YAG Laser Microstructure and Mechanical Properties of Titanium Matrix Composite Reinforced by Functionalized MultiWalled Carbon Nanotube Preparation of Cellulose Nanofibrils by High-Pressure Homogenizer and Zein Composite Films Nanomagnetic Poly(vinyl alcohol) Hydrogels Synthesis and Characterisation of Hematite-Zircon Nanocomposite by Sol-Gel Method Combustion Synthesis and Sintering of TiB2-Al2O3 Composites
- Investigating the Effects of Different Al-Content as a Precursor Preparation of NiO-Ni Nanocomposite by Using of Glutaric Acid in Neutral Condition Growth of Carbon Nanotube on the Ni-Mesoporous Alumina Catalysts for Use as Adsorbent Synthesis of Co/TiO2 Nanocomposite and its Use in Construction of a Sensitive and Selective Sensor for Determination of Ciprofloxacin Hydrogen Desorption Properties of Mechanically Alloyed MgH2-9 wt % V-1 wt% Al Nanocomposite Production of Cu-TiC Nanocomposite Using Mechanical Alloying Route The Effects of Reduced Graphene Oxide (rGO) on ZnO Film UV-Detector Mechanical Properties and Fracture Study of Alumina Dispersion Hardened Copper-Based Nano-Composite at Elevated Temperatures Ionic Liquid Aided Chemical Synthesis of Noble Metal Nanocomposites as Efficient Nanoelectrocatalysts Preparation and Characterization of HAp/TiO2 Nanocomposite for Photocatalytic Degradation of Methyl Orange under UV-Irradiation Ethanol Sensing Properties of Tin Oxide Doped Using Silver Nanoparticles Deposition of Polyaniline/Silica Nanocomposite Coating on Stainless Steel
- Study of its Corrosion Properties Electrical and Mechanical Properties of Cu Matrix Nanocomposites Reinforced with Yttria-Stabilized Zirconia Particles Fabricated by Powder Metallurgy Investigation of Microbial Cellulose/Cotton/Silver Nanobiocomposite as a Modern Wound Dressing Mechanically Activated Synthesis of Tungsten Carbide Nanoparticles from Tungsten Oxide Synthesis and Modification of SAPO-34 Nanoparticles by Incorporation of Metal Ions Using Rapid High Temperature Method Transient Liquid Phase Bonding of Al/Mg2Si Composite Using a Cu-Ni Mixed Powder The Effect of Layer Number on the Nanostructural Ternary Mixed Oxide Containing Ti, Ru and Ir on Titanium Emulsion Technique to Synthesize Polystyrene Incorporated with Surface Modified and Unmodified Nano-TiO2 Particles Synthesis of Magnetic Nanocomposite Fe3O4 Coated Polypyrrole (PPy) for Chromium(VI) Removal Nickel Oxide Coated on Pretreated MWCNTs as an Electrode for Supercapacitor Dispersion of Multi Walled Carbon Nanotubes within 3 mol. % Yttria Stabilized Zirconia Based Ceramics: A Comparative Study of Methods Investigation of Nanoparticles of Carbon and Calcined Alumina on Mechanical and Corrosion Properties in MgO-C Refractories Silver Nanocolloid: Synthesis, Optical and Thermo-Optical Properties Determination of Tryptophan Using Nanocomposite-Based Sensor Chapter 7: Nanoelectronic and Magnetic Materials Characterization of Nano-Structured Multiferroic Bismuth Ferrite Produced via Solid State Reaction Route Fabrication of Nanostructure Ferrite Foam The Effect of Heat Treatment on the Magnetic Properties of Nanocrystalline Fe-Ni-Si Powders An Investigation of Solvent Effect on Rhombohedral/Monoclinic/Tetragonal Phase Properties of Pb(Zr0.53Ti0.47)O3 Nanoparticles Prepared via Sol-Gel Method Investigation on Phase Evolution in Mechanically Alloyed Nano-Structured Fe-Si System Effect of Barrier Layer on Fabrication of FePt Nanowires by Electrodeposition into Nanoporous Alumina Templates An Investigation on Magnetic Interacting La0.6Sr0.4MnO3 Nanoparticles Improvement and Red Shift Toward Visible Spectrum of TiO2 Nanofibers through Doping by Fe2O3 and Nitrogen Synthesis of Nanostructured Bismuth Ferrite by Mechano-Thermal Route Low Temperature Synthesis of Barium Titanate Powder by a Modified Sol-Gel Method Influence of Deposition Voltage on Growth of ZnO Nanowires by Cathodic Electrodeposition Modified Synthesis Temperature of Ba3 Co1.7 Ni0.1 Cu0.1 Mn0.1 Fe24 O41 Z-Type Ferrite Nanoparticles Prepared by Co-Precipitation Method Removal of Copper from Industrial Water and Wastewater Using Magnetic Iron Oxide Nanoparticles Modified with Benzotriazole One-Step Synthesis of CoFe2O4 Nano-Particles by Mechanical Alloying Removal of Aluminum from Water and Wastewater Using Magnetic Iron Oxide Nanoparticles Template Assisted Growth of Zinc Oxide-Based Nanowires and Piezoelectric Properties Manipulating the Structure and Morphology of Cobalt-Boron Nanoparticles through a Chemical Approach Investigation on Phase Evolution in the Processing of Nano-Crystalline Cobalt Ferrite by Solid-State Reaction Route Study the Effect of Nanoemissive Materials on M-Type Cathode Performance Microstructural and Magnetic Properties of Nanostructured Fe65Co35 Powders Prepared by Mechanical Alloying Effect of Mn Dopant on Lattice Parameters and Band Gap Energy of Semiconductor ZnO Nanoparticles On the Vibrational Behavior of Piezoelectric Nano-Beams The Phonon Confinement Effect on the Impurity States in Cylindrical Nanowire with a Finite Confining Potential in Presence of Electric and Magnetic Fields Chapter 8: Novel Approaches Validity of Molecular Dynamics Heat Transfer by Quantum Mechanics Fabrication of Super Paramagnetic Nanoparticles by Sol-Gel Method for Water Purification Molecular Dynamics Simulation of Nanocluster Formation in a Supersonic Nano Nozzle Fabricated by Anodizing the Aluminum Modification of Nanoclay Systems: An Approach to Stabilizing Drilling Fluids Preconcentration and Determination of Lead by Solidification of Floated Organic Drop Coupled with Nanodrop Spectrophotometry Experimental Manipulation of Gold Nano-Particles by Atomic Force Microscope and Investigating Effect of Various Working Parameters Optical Properties of Synthesized Fe3O4 Nanoparticles Doped in Nematic Liquid Crystal under Electric Field Mitigation of Fine Particles Migration in Deep Bed Filters Treated by a Nanofluid Slug: An Experimental Study Preparation of Nano Crystalline Titanium Dioxide by Microwave Hydrothermal Method Effect of Friction Stir Processing on Mechanical Properties of Surface Composite of Cu Reinforced with Cr Particles Protection of High-Tech Buildings Facades and Envelopes with One Sided Nano-Coatings Sol-Gel Synthesized Nanostructured Silica Particles for Application in Gas Transport Properties of PU-PDMS Based Mixed-Matrix Membranes Chapter 9: UFGNSM Commercialization and Industrial Applications Comparison of Cyanide and Chloride-Hypochlorite Leaching of a Ball Milled Refractory Gold Concentrate with Ultra-Fine Particles Application of Nano Silica in Concrete for Enhanced Resistance against Sulfate Attack Commercialization Strategies for Industrial Applications of Nanomaterials in Building Construction Production of Ultrafine Grained API X70 Steel with Controlled Rolling Synthesis and Antifungal Property of Mg Doped Zinc Oxide Nanocubes on the Glass Substrate Using Solution-Evaporation Method at Low Temperature Chapter 10 UFGNSM for Energy Applications Synthesis of GaN Nanoparticles by DC Plasma Enhanced Chemical Vapor Deposition Effect of Nitrogen Doping on the Phase Evolution of the TiO2 Nanoparticles Effect of Fluoride Concentration and Water Content on Morphology of Titania Nanotubes in Ethylene Glycol Solution Solvothermal Synthesis of CuInSe2 Nanostructured Powders: Comparing Open-Air with Applying Internal Imposed Pressure Electrophoretic Deposition of Titania Thin Films: Influence of Deposition Time on Microstructural and Optical Properties of the Coatings Synthesis of Hard Carbon as Anode Material for Lithium Ion Battery
by "Nielsen BookData"
