Research in materials and manufacturing technologies : selected, peer reviewed papers from the 3[rd] International Conference on Materials and Products Manufacturing Technology (ICMPMT 2013), September 25-26, 2013, Guangzhou, China
著者
書誌事項
Research in materials and manufacturing technologies : selected, peer reviewed papers from the 3[rd] International Conference on Materials and Products Manufacturing Technology (ICMPMT 2013), September 25-26, 2013, Guangzhou, China
(Advanced materials research, v. 834-836)
Trans Tech Publications, c2014
- : [set]
- Part 1
- Part 2
- Part 3
大学図書館所蔵 件 / 全1件
-
Part 1A25118/834-140006511X,
Part 2A25118/834-2400065128, Part 3A25118/834-3400065136 -
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
[rd]: superscript
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the 3rd International Conference on Materials and Products Manufacturing Technology (ICMPMT 2013), September 25-26, 2013, Guangzhou, China.
The 402 papers are grouped as follows:
Chapter 1: Micro/Nano Materials and Films;
Chapter 2: Polymer Materials;
Chapter 3: Composites;
Chapter 4: Ceramic;
Chapter 5: Metal, Alloys and Mining Engineering;
Chapter 6: Chemical Materials;
Chapter 7: Biomaterials and Technology;
Chapter 8: Surface Engineering/Coatings;
Chapter 9: Building Materials, Construction and Architecture;
Chapter 10: Material Processing Technology;
Chapter 11: Sensors and Detecting Technology;
Chapter 12: Signal and Intelligent Information Processing;
Chapter 13: Electronic, Optoelectronic and Automation;
Chapter 14: Industrial Robotics and Mechatronics;
Chapter 15: Mechanical Design and Modeling;
Chapter 16: CAD/CAM/CAE;
Chapter 17: Product Design and Manufacture;
Chapter 18: Advanced Manufacturing Technology;
Chapter 19: Computer Applications and Mathematical Modeling;
Chapter 20: Industrial Engineering and System Analysis;
Chapter 21: Engineering Management and Engineering Education
目次
Preface and Conference Organization
Chapter 1: Micro/Nano Materials and Films
Preparation of Coralloid -FeOOH and Discussion on its Crystal Growth Mechanism
Facile Preparation of the Single Crystalline In2S3 Nanosheets with Highly Efficient Photocatalytic Activity
Study on Cerium Doped Flower-Like ZnO Microcrystaline Preparation and its Microwave Absorbing Properties
The Research of Nano-Mechanical Properties of Mono-Crystalline Silicon
Friction and Wear Property of Ti(C,N)/ZrO2/WC Nano-Composite Cermet Die Material
Fabrication and Characterization of Superhydrophobic Film on Titanium Substrate
Toward the High-Quality Graphene for Optoelectronic Applications by Optimization of the Growth and Transfer Parameters
Synthesis of -Phase GeO2 Nanoparticles and their High Pressure Studies
Preparation of Superhydrophobic Surface on Copper Foils by a Facile Method
Self-Assembled Alcohol Sensor of In2O3 Nanorods
Preparation and Magnetic Properties of FeSi/SiO2 Nanocomposites with Core-Shell Structure
Synthesis and Photocatalytic Activities of Bi2WO6 Three-Dimensional Hierarchical Microstructures
Interaction of the Femtosecond Laser Pulses with the New Silica Nanocomposites Containing Au and CdS
Effect of Substrate Temperature on Structural and Optical Properties of ZnO:Co Thin Films Fabricated by Laser Molecular Beam Epitaxy
Effect of Deposition Pressure on the Properties of Silicon Thin Films
Effect of Nano Fibre Arrays on the Peel Strength between Low-Density Polyethylene Film and Aluminium Foil
A Study of ITO Thin Films Fabricated by DC Magnetron Sputtering Method
Synthesis and Characterization of P (AAEA-Co-Aa)-PVP-PEG/Gold Nanoparticle Composite Hydrogel with Pore and Semi-Interpenetration Structure
Synthesis, Characterization and Antibacterial Activity of -Polylysine/PVA Biodegradable Film
Crystal Structure and Optical Characterizations of Titanium-Doped Zinc Oxide Thin Films for Organic Photovoltaic Applications
Preparation of PI Microporous Membrane for Lithium Ion Batteries
Synthesis and Capacitance of Multi-Walled Carbon Nanotube/Polyaniline Nanocomposites
Properties of SiO2CuOx Films for Nitrogen Dioxide Detection
Chapter 2: Polymer Materials
Synthesis, Characterization and Application of 2, 2'- Methylene-Bis (4,6-Di-Tert-Butyl-Phenyl) Phosphate Sodium
Pyrolysis Characteristics Research of Waste Plastics of Electronic Waste
Crystallization Regimes and Spherulitic Morphology of Poly(trimethylene terephthalate/isophthalate) Random Copolyesters
Study on Application of Insulating Materials in Electrical (Electronic) Equipment
Effect of Accelerator Type on Dynamic Properties of Natural Rubber Vulcanizates
Study of Voids in the Flexible RFID Tag Inlays Packaged by Anisotropic Conductive Adhesive
Analysis of Stinky Components in Natural Rubber Latex
Microwave-Assisted Preparation of PS Phase Change Microcapsules
Thermal Degradation of Pa 6 Film Prepared from a Phenol/Dichloroethane Mixed Solution
Shape Recovery Characteristics of Shape Memory Polymers Subjected to Bending
On Elastic-Plastic Explosives for Explosive Hardening
Synthesis and Characterization of Alcohol Soluble Acrylate-Polyurethane Adhesive for Low Surface Energy Substrate
Study on Natural Rubber Quality of Micro-Cut Tapping with Gas-Stimulation
Research on Insulator Detection by Nuclear Magnetic Resonance
Chapter 3: Composites
Preparation and Electromagnetic Properties of CIP/SiO2/PANI Composites
Research of the Stability of Stiffened Composite Panel
Damping Properties of Novel Organic Hybrids of Textile Reclaimed Rubber and Hindered Phenol
The Property of Waterborne UV-Curable Polyurethane Based on Alkali Lignin of Wheat Straw
Co-Extrusion of Wood Flour/PP Composites with PP-Based Cap Layer Reinforced with Macro-and Micro-Sized Cellulosic Fibres
Preparation of Porous Titanium with High Porous Titanium and Surface Modification with High Concentration Alkaline Treatment
Effect of 1-(9-Ethyl-9H-carbazol-3-yl)-4,4,4-trifluorobutane-1,3-dione on Properties of Luminescent Europium (III) Complexes
The Impact of V/III Ratio on GaN Growth by HVPE
Research Status of Carbon Fibre-Reinforced PEEK Composites
Preparation of a Multi Media Ceramsite Containing Magnetic Powder
Defect Types and Ultrasonic Nondestructive Testing for Fiber-Reinforced Composites
Study the Effect of the Addition of HAp from Crocodile Bones on the Mechanical Properties of PLA/HAp Composites
Impact Resistance of Shear Thickening Fluid (STF)/Kevlar Composites for Body Armor Application
Wearing Research of Modified PTFE Materials in Water Pump Bearing
Analysis of Low Temperature and High Temperature Performance of Different Aggregate SMA
Synthesis and Characterization of Binuclear Ruthenium Vinyl Complexes with Dithienylethene Unit
Theoretical Predication Method of High Order Elastic Constants of Cubic and Tetragonal Crystal Material
First-Principles Study of Structural, Electronic and Optical Properties in BaTi0.5Ni0.5O3
Crystallization Behavior of Polyamide 6 Prepared from a Phenol/Dichloroethane Mixed Solvent
Effects of Calcium Carbonate on the Thermal Properties of Acrylonitrile-Butadiene-Styrene/Calcium Carbonate Composites
Preparation and Study on Si/Ag/C Composite as Anode Material for Lithium Ion Batteries
Mechanical and Tribological Properties of Polytetrafluoroethylene Filled Polyoxymethylene/Aluminum Foam Interpenetrating Phase Composites
Thermodynamics Analysis of SnO2/C Composite Materials Fabricated by Biotemplating
Chapter 4: Ceramic
Preparation and Characterization of Coprecipitation-Derived Ferromagnetic Glass-Ceramic for Hyperthermia Application
Preparation and Characterization of Bioactive and Magnetic Biphasic Thermo-Seeds Material
Influence of Boron on Glass-Ceramic Magnetic Performance for Hyperthermia Application
Structure Characterization of Sintered CaO-Al2O3-SiO2 Glass-Ceramic Reinforced with Spodumene
Mechanical Connection between 8YSZ Ceramic and 7075 Aluminum Alloy
Chapter 5: Metal, Alloys and Mining Engineering
Recent Research on Ternary Phase Diagram of Gold Alloy
Cause and Remedies of Bulge Particle Defect on Surface of Hot-Dip Galvanized Steel Sheets
Wetting Behavior and Interfacial Characteristic of the Sn-3.5Ag Alloy on Ni Substrates
Application of Rare Earth Elements in the Study of Oil-Source Correlation in the Tarim Basin, China
Crack Failure Analysis on Kitchen Knife of 5Cr15MoV Steel
Preparation and Characterization of Quaternary TiZrMnFe Gettering Compound
SEM In Situ Study on Fatigue Crack Growth of LC9 Aluminum Alloy Subjected to Elevated Temperature
Effect of Minor Silver Addition on Microstructure and Properties of Al-8Zn-1.Cu-1.3Mg-0.1Zr Alloys
The Characteristic of Ores and Concentrates of the Open Society "EVRAZ KGOK"
Pitting Resistance of Domestic Super Martensitic Stainless Steel 00Cr13Ni5Mo2
Experimental Study on Magnetic Separation of Oolitic Hematite Ore
Comparative Analysis of Steel Slag Characteristics and Treatment Process
Characteristic Analysis on Suppressing VFTO in GIS by Ferrite
Investigation of Cr34Ni45 Ethylene Cracking Furnace Tube in Service
Domestic and Overseas Research Status on Molybdenum Resources and its Use
A Modified Yoshida-Uemori Constitutive Model and its Application to Cold-Bending in Weldox960
Texture Development in a Special Rolled AA6016 Aluminum Alloy
Study of the Impact Factors on Heavy Metals Migration of Stainless Steel Choppers
Investigation of 2024 Aluminum Alloy Flange Semi-Solid Thixoforging by Changing Cavity
Hot Deformation Behavior and Processing Map of a Nickel-Base Superalloy GH4169
Study of the Effect of Oxygen Annealing on YBCO Platelet Aggregates Synthesized by a Biomimetic Method
Chapter 6: Chemical Materials
The Mechanism Study of Sewage Scaling in Gas Filed Containing H2S
Amino Acid Catalyzed Conjugate Addition of Thiol to Dienone
Study of Viscosity and Stability of SiO2 Sol Prepared by Sol-Gel Method
The Study of Catalytic Oxidation of NOx Using Mn3O4/GO/PMS
Effects of Catalyst on the Transmittance and Stability of SiO2 Antireflective Film Prepared by Sol-Gel Method
Morphology and Electrochemical Performance of Amorphous Nickel Hydroxide Added Anion
Photostability of Monoazo Disperse Dyes in Different Solvents
Methanol Conversion to Propylene over Mo-HZSM-5 Zeolite
Application of Dividing Wall Column in High Purity Cyclohexene Oxide Distillation
Crystal Structure of Biammonium Hexamolybdonickelate (II) Hydrate, (NH4)2(NiMo6O24)(H3O)6
Study on a Structure of 2,6-Pyridine-Dicarboxylic Acid Europium Quarthydrate
Study on a Novel Structure of C21H9Ba2SrN3O12
Simulation and Optimization of Chlorobenzene Distillation Process
Electrochemical Synthesis and Electrochromic Properties of Poly(3-bromothiophene) Films
The Extraction of Polyphenols from Tea Leaves Based on Mechanochemical Methodology and Aqueous Two-Phase System
Study on Novel Structure of Praseodymium Complex, C5H13O11Pr
The Ternary System Phase Equilibrium of KCl-NH4Cl-H2O at 80 DegreesC
Progress of Purification and Applications of Coal Gangue
Study on the Chemical Stability of Mechanochemically Modified Polyvinylchloride (PVC) Membrane
Study on Adsorption of Crosslinked Starch Microspheres towards Heavy Metal Ions
Chapter 7: Biomaterials and Technology
Preparation of Guiqi Polysaccharide and Antioxidant Activity In Vitro
Solvothermal Synthesis, Structure, Fluorescence and Magnetism Properties of a Novel 3D Metal-Organic Framework Based on Tetranuclear Copper Secondary Building Units
Calcium Methoxide Synthesis from Quick Lime Using as Solid Catalyst in Refined Palm Oil Biodiesel Production
Preparation and Characterization of Cellulose Films with Curcumin
Study the Effect of HAp Content in PLA/HAp Microsphere on the Efficiency of Drug (Clindamycin) Loading Process
Synthesis and Antiproliferative Activities of Novel 2-Phenylaminopyrimidine (PAP) Derivatives
The Effect and Mechanism of Apoptosis on Hela Cells Induced by Bufotalin
Ganoderic Acid Restores the Sensitivity of Multidrug Resistance Cancer Cells to Doxorubicin
Antioxidant Activities of Flavonoids from Canavalia maritime
Development of Selective Blue-Laser Lithography for Biomedical Applications: A Pilot Study
Chapter 8: Surface Engineering/Coatings
The Structure and Corrosion Process Characterization of Galvannealed and Galvanized Steel Sheets
Modeling and Experimental Study of the Supporting Force of Water Striders Legs
Coating Structure and Corrosion Resistance Behavior of Hot Dip Zn-Al-Mg-Si Alloy Coating Steel Sheet
Influence of Powder Structure on Decarburization and Microstructure of HVOF Sprayed WC-12wt.%Co Coatings
Study on the ALN Thin Film for Improving the Performance of Heat Dissipation on High Power LED Substrate
Comparison of Microstructure and Mechanical Properties of Co-Based and Fe-Based Alloy Coatings Deposited by PTA
Fracture Analysis on Cracking of 16Mn Flange
Structure and Properties of TiAlLaN Coatings Deposited at Various Ar/N2 Flow Ratio Using a Mid-Frequency Magnetron Sputtering System
Optimal Design of the Thickness of the Multi-Layer Absorption Plates Based on the Max Absorption Coefficient
Investigation on Dynamics of Ultrasonic Surface Rolling Process
Effects of Tribo-Couple and Environmental Medium on the Tribological Properties of the Graphite/CaF2/TiC/Ni-Base Alloy Composite Coating
Mechanisms and Characteristics of Ultrasonic Impact Treatment on Steel Surface
The Study on the Process and Mechanism of Explosive Hardening of Hadfield Steel by a New Flexible Explosive
The Study of Stability of Tungsten Plug CMP Slurry for IC Multilevel Interconnect
Fabrication of Superhydrophobic Surfaces on Copper Substrates via Brush Plating Technique
Research on the Rate-Dependent Fracture Energy of Al/HTPB Adhesive Interface
Chapter 9: Building Materials, Construction and Architecture
Study on Displacement Prediction Model of Foundation Pit
Learn from Tradition: Utilizing Traditional Building Materials in the Post-Earthquake Reconstruction
Chapter 9: Building Materials, Construction and Architecture
Research Progress and Existent Problem of Nano Cement
Summary of Performance and the Application of the Concrete Filled Steel Tubular Structures
Seismic Reinforcement of a r.c. Building with External Steel Frameworks: The Case of the Primary School XXV April of Arcola (Italy)
Research on Construction Control of Irregular Steel-Arch Cable-Stayed Combination Bridges
Experimental Study on the Effects of Pumice Powder to Cement Soil
Extra-Lightweight No-Fines Cellular Concrete - Use for Non-Structural Material
Experimental Research and Finite Element Analysis of BFRP Flexural Strengthening Efficiencies of Pre-Damaged Concrete Beams
Experimental Study on Impermeability Performance of Chopped Basalt Fiber Reinforced Concrete
Research Status and Proposals of Basalt Fiber Reinforced Concrete
The Analysis of the Adhesion between Limestone, Basalt and Asphalt
Study on Properties of Plate Performance of Black Substratum Cement Concrete Pavement
Protection Effectiveness of Concrete Surface Treating Materials
Experimental Research on Influences on Mechanical Property of C50 Waterproof Concrete by Basalt Fiber
Research on Flexural Behavior of Damaged RC Beams Strengthened with Basalt Fiber Reinforced Polymer
Experimental Research on Basalt Fiber Reinforced High-Strength Concrete Filled Steel Tubular Short Columns Subjected to Axial Compression Load
Global Analysis of Polymer Pads in a Bearing Element for a Large-Span Movable Sluice
Microscopic Mechanism Study on the Strength Effects of Pumice Powder to Cement Soil
Chapter 10: Material Processing Technology
Experimental Study on the Effect of Jet Penetrating into Disconnected Targets with Water Medium
Prediction of Welding Residual Stress by Using Thermo-Metallurgical-Mechanical Constitute Model
Experimental Study on Low-Temperature Cold Cutting Technology
Summary of Fatigue Life Research Method on Rubber Components
Research Development of AuSn20 Solder Preparation Technology
Impact of Sample Preparation on Determination of Hydrogen Content in TC4 Titanium Alloys
Diffusion Bonding of Mg-AZ31B/Al-6061 and Characteristics with Pressure and with no Pressure
Investigation of Heat Treatment on Mechanical Properties of SAE4320 and SAE8620 Alloys
Shape Analysis of Three-Dimensional Curve Surface for Flexible Rolling Metal Plate
A Hypervelocity Impact Facilities Based on Double-Barreled Two-Stage Light Gas Gun
The Effect of Inclusions on Internal Cracks for 20Mn5N Steel Ingot after Forging
Study on the Effect of Homemade Welding Wire Contaning Ni, Cr Elements on the Weldability of Industrial Pure Aluminum
Prediction of Underwater Wet Weld Seam Forming Based on ARX Model
Electrostatic Spinning Preparation and Mechanical Properties of PLGA Fibers and Fiber Membrane
Boundary Element Modeling of Crack Propagation Path in Brittle Matrix Composites Reinforced by Short Rectangular Particulates
Effects of Cutting Parameters on Residual Stresses in High-Speed Milling of Ti-17
Design and Researches on a Special Drillbit of Drilling Carbon Fiber Reinforced Plastics
Effects of Parameters on Surface Roughness of Metal Parts by Selective Laser Melting
Analysis of the Research Status of Tin Whisker's Influence on Lead-Free Soldering
Research on the Effect of Mechanical Processing on Lithium Tantalate Crystal Pyroelectric Coefficient
Effects of Asymmetrical Rotated Rectangular Basis in Two-Dimensional Gyromagnetic Photonic Crystals
Chapter 11: Sensors and Detecting Technology
Filtering Design and Analysis of Clamp-On Pressure Signals of High Pressure Fuel Pipe
A Method to Compensate Thermocouple Sensor Non-Linearity Based on Lagurre Orthogonal Polynomial Basis Functions Neural Network
Test Platform for Marine Anti-Interference Satellite Navigation Receiver
First Stage Detection of Node Capture Attacks in WSN Based on Cloud Model
Fabrication and Hydrogen Sensing Property of In2O3 Nanotowers
The Research of Learning Mechanism in Fault Diagnosis System of CNC Based on MAS
A Research of Electromagnetic Tomography Based on Different Parameters
Design and Implement of High-Accuracy On-Line Metal Thickness Measuring Instrument Based on NiosII Processor
Identification of Liquor Brands Based on near Infrared Spectroscopy
New Monitoring System of Firebrick Lining Deterioration of Blast Furnace Devil in Metallurgical Plants of China
Chapter 12: Signal and Intelligent Information Processing
The Development and Application of Small Watershed Hydrological Telemetry System
Central Node-A Novel Technology in Train Safety Communication System
Application of Data Mining in the Forecasting of Railway Passenger Flow
A Concatenate Code for Error Correcting Code in Bit Pattern Media Recoding System
The Transceiver Circuit Design of Digital Ultrasonic System
The Application and Research of CATV Communication Technology in the Field of Electricity Consumption Information Collection in China
New ART2/ART2A Algorithm Apply to Entire Real Number Field
Signal Processing of Giant Magnetostritive Force Sensors
Image Processing Using Discrete Wavelet Transform Based on OMAP3530
Design of Intelligent Teaching System Based on Data Mining Technology
A Quick Sorting Algorithm Adaptive to Massive Data with High Repetition Rate
A Noise Reduction Method of Interferogram Based on Discrete Wavelet Transform for Quantitative Calibration of near Infrared Spectra
A New Image Fusion Method Based on Improved PCNN and Multiscale Decomposition
The Processing of Laser Signal Based on Spatial Correlation Threshold Filtering in Foggy Media
Research on the Enhancement and Processing of Faint Laser Signal in Foggy Conditions
Design and Implementation of a Management Information System of Equipment Based on RFID
Study of License Plate Recognition Technology
Research on the High-Speed Data Acquisition System Based on Clock Distribution
Novel Initialization Method for Nonlinear Kalman Filters
Novel Design Method for Realization of Consistency Checking for a Class of Non-Linear Filters Based on Point Selection Technique
The Study on the Test Model about the Electromagnetic Inductive Communicating Signal Quality
Time-Frequency Characteristics of Vibration Signals Analysis for Large Instantaneous Impact Mill Rolling Based on Wavelet Packet
Time-Frequency Features of Signal Analysis and its Application in Mechanical Fault Diagnosis
An Energy Metering Communication Model Based on IEC 61850
Closed Loop Dynamic Fuzzy Neural Network for Real-Time Lifetime Forecasting
Research on Architecture Survivability of Wireless Networks
Research and Improvement of Clustering Routing Algorithm in Ad Hoc Network
An Adaptive Digital Camouflage Scheme Using Visual Perception and K-Mean Clustering
Chapter 13: Electronic, Optoelectronic and Automation
Design of LED Display-Screen System Base on TMS320F2812
Analysis on Bi-Frequency BUCK Circuit Current Ripple Suppressing
Higher Order Sliding Mode Control for a Class of MIMO Systems
Analysis of the Impact Caused by Residential Users Distributed Photovoltaic Grid-Connected on Distribution Network
Design of Inverter Based on the Soft-Switched of High Frequency Pulse DC Loop
Study the Coupling Characteristics of Line Defects and Point Defects in Photonic Crystals
A Novel Octave Filter Bank Design Method Based upon Cascaded Filters
Design of Automatic Sunlight Tracking Solar Panel System Based on Single Chip Microcomputer
A Novel Coupled-Line Gysel Power Divider for Dual-Band and High-Power applications
Design of Local Oscillator Based on DDS of High Performance Short-Wave Receiver
Study on the Characteristics of Photovoltaic Large Array Based on the Double Diode Model
Introduction of a Device for Automatic Collection of Potential Data and its Application in Pipeline
A New Method to Measure the Absorption Coefficient Based on the Sound Pressure Delaying
Research on NLOS Mitigation Method for TOA Positioning
Impact of the Phosphors on the Conformal Coating LED by Optical Simulation
The System for the Intelligent Remote Control of the Lead-Acid Battery
Research of High Speed Spindle Control Method Based on Neural Network
Excess Heat Triggering by 488 nm Laser in a D/Pd Gas-Loading System
A Machine Vision System for Measurement of Mechanical Parts Based on LabVIEW 2012
Micro Network Monitoring Technology Research for Smart Grid
Automatic Allocation Algorithm of Holographic Correlation Peaks Based on Neighborhood Variance
Chapter 14: Industrial Robotics and Mechatronics
Thermal Behavior Regression Analysis for Dual Linear Feed Drive Mechanism with Self-Tuning PLS
A Tracking Controller Design for Discrete Nonlinear Singularly Perturbed Systems Based on Fuzzy Singularly Perturbed Model
Application of Virtual Kinematic Chains in Cooperating Robot Systems
The Design of 5V/100W High Frequency Switching Power Supply
A Remote Measurement and Control System Architecture Based on Embedded B/S Structure Using AJAX-CGI
Fuzzy Passivity Control of Flexible Joint Robot
Underwater Target Tracking Algorithm Based on an Improved Color Matching
Applications of Extended Kalman Filter for Position Sensorless Control of Permanent Magnet Linear Synchronous Motor
Preliminary Study on the Effect of Operating Conditions on the Measurement Accuracy of Electronic Type Electric Energy Meter
On Fuzzy Sliding Control for a Robot Manipulator
Self-Repairing Control System for a Hybrid Underwater Vehicle
MCCB Instantaneous Calibration Current Error Decomposition and Control Method
Chapter 15: Mechanical Design and Modeling
Periodic and Chaotic Dynamic Responses of Face Gear Transmission System
Experimental Study on the Distribution Coefficient of Horizontal Force Acting on the Wharf Transverse Bents
The Power Loss and Efficiency Analysis of a 3DOFs Planetary Gear Box
The Mechanical Performance Evaluation of a Mechanism with Curved Edge Driving Component
Dynamic Load of Agricultural Machinery Drive Axle Housing Based on Field Measured Road Roughness
Tests Results and Simple Structural Analysis of the Main Lighthouse in the Harbor of Livorno (Italy)
Force Distribution Effect on Clasp Mark of Metal Shell
Engineering Calculation and Application of Perforation Impact Dynamic Loads in Oil and Gas well
The Effects of Leakage on Friction Loss over a Rotating Disk
Forces Analysis of Piston Couple in Swash-Plate Axial Piston Motor
Genetic Algorithm Optimization of a Double Four-Bar Manipulator
Dynamic Performance Analysis and Simulation of Hybrid-Driven Seven-Bar Mechanical Press with Double Cranks
Double Laplace Transform Computing Dynamic Response of the Large Thickness to Span Ratio Beam
Finite Element Method for Solving Bucking Load of Semi-Rigid Steel Frame
Computation of Dynamic Stress Intensity Factor by Direct Integral Boundary Element Method
Analysis and Simulation on Vehicle Rollover Dynamic Driving on Curving Path
Research on Vibro-Acoustic Characteristics of Underwater Finite Plate-Shell Structure under Multiple Excitations
Grinding Wheel Dynamic Balance Weight Type System Based on the Self-Optimal Fuzzy Control
The Design of Hydraulic Cylinder for Measuring the Contact Stress of the Bud Type Seal Ring
Mechanical Analysis on the Scour of Submarine Pipeline
The Pressure Performance of a Slide-Style Multianvil Large Volume Press
Aircraft Navigation Model Based on Genetic Algorithms
Loading Analysis and Mathematical Calculation for Arc Axis of the Exponential Function
ACO-Based Holes Machining Path Optimization Using Helical Milling Operation
Two Analytical Models to Determine the Stress Singularities in Elastic-Viscoelastic Joints
Chapter 15: Mechanical Design and Modeling
The Optimal Design of Thermal Insulation on the Pipeline by Using Particle Swarm Optimization
Half Region Dynamical Slip-Frequency Control of Single-Sided Linear Induction Motor
Chapter 16: CAD/CAM/CAE
The Reversing Design for the Cooling Water Cavity of Engine's Cylinder Head and CFD Analysis
Structure Design and Kinematic Analysis of Stacking Mechanical Arm of Aluminium Ingot
Numerical Simulation and Optimization of Radial Heat Pipe Heat Exchanger Based on Field Synergy Principle
Numerical Simulation of Gas-Solid Two-Phase Flow in Air Pre-Cleaner Based on CFD
Structure Design and Simulation of a Pulsar Navigation-Oriented X-Ray Detector
Parametric Design Model of Disc-Scoop-Type Metering Device Based on Knowledge Engineering
Automatic Process Intermediate Model Generation in Process Planning
3D CAD Model Retrieval Algorithm Based on Accessibility Cone Distributions
Numerical Calculation of the Ice Grow and Empirical Calculation Results
An Engineering Drawing Retrieval Method Based on Spherical Harmonics
Numerical Analysis on Mechanical Property of Bolted Joint
The Optimization Design of Arm Bracket Structure Topology Based on ANSYS
Design and Analysis of Rack-Torsional Hydraulic Straightening Machine
Research on Even-Loading Mechanism of Multi-Planetary Gear Transmission
Research on Dynamic Simulation and Analysis of NGW Planetary Gear Train Based on ANSYS
Study on Failure Trend of L-Type Deflection Machine Structure on Basis of Static Strength Analysis
Static and Dynamic Characteristic Analysis for the HSR Series Linear Motion Guide
Study on the Effect of Cone Diameter on the Cone Resistance and Steady Flow Force of Hydraulic Poppet Valve
Finite Element Analysis on Dynamic Characteristics of Maglev Suspension System
Dynamic Characteristics Research of Boring-Milling Ram Based on ANSYS
Hydrodynamic Analysis of Submarine of the Wave Glider
The 3D Solid Model and Finite Element Analysis of Working Device of Loader ZL16H
Research Advances and Characteristics in Transplanting Mechanism of High-Speed Transplanter
The Analysis of Rotary Kiln Thermal Characteristics Based on ANSYS and FLUENT
Analysis on Static Character of Piezoelectric Tubular Composite Actuator
Attitude Stability Analysis of Expendable BathyThermograph
A Study of Performance Influence Caused by Mode Interference for Vibratory Cylindrical Gyroscope
Optimization of 450mm Wafer Ashing Chamber by Computational Fluid Dynamics Simulation
Process Simulation of Anchor Stirring in Crystallizer
Residual Stress Analysis of TIG Welding Process of Thin-Walled Stainless Steel and Red Copper
Simulation on Stress Relaxation of DD3 Nickel-Based Single Crystal Superalloy Based on Micro-Cell Model
Study on Simulating the Temperature Field of P110 Oil Case for Quenching by Finite Element Method
Computer Simulation of Aluminum Conductors Drawn in High Speed
System Development of Processing Functional Gradient Material Part by Laser Rapid Prototyping
Simulation Study on Wax Injection for Investment Casting
The Lost Foam Casting Simulation of the Gray Cast Iron Linner
Numerical Simulation for Fluid Flow of Flow Channel Structure in the Injection-Rolling Nozzle during Polymer Continue Injection Direct Rolling
Development of Visualize Simulation System of Jet Milling Process
How to Increase the Accuracy of Analysis and Reduce the Computational Time in ANSYS in the Case of Deformation Study of Orthopedic Bone Plates
Numerical Simulation of New Class-Honeycomb Sandwich Structure's Core
Dynamics System Simulation Study of Locking Mechanism for Aviation Aircraft Based CATIA and ADAMS
Reliability Index Calculation of Lateral Load Bearing Single-Piles Based on ANSYS
Chapter 17: Product Design and Manufacture
Opened Performance of Hydraulic Support Electro-Hydraulic Valve Test Bench Design
Research of Rolling Bearing Selection Based on Hybrid Algorithm
Testing and Evaluation of Baby Walkers Based on Product Injury Data
Research on the Maintainability Analysis and Design for Artillery Projectiles
Manufacture of Nb3Al Short Wires by RHQT Method Using a Newly Designed Apparatus
A Protection Scheme for Standard Equipment to Avoid Harmful Random Large Current
Optimal Design of Cooling Device for High Power LED Headlamp
An Integrated Approach to Index Weight Based on Improved D-S Evidence Theory and Application of the Product Solution Evaluation
The Research of Public Rental System with Electric Car
Analysis on Apparel Marker Making's Technical Requirements and its Influencing Factors
Design of Holes Distance Adjustable Device of Duckbill Seeder
Analysis of Metering and Billing Models of Private Pure Electric Vehicle Oriented Operation
A Successful Service Innovation Model for Shortening the Design Process
Shaftless Driving Development Research on Sheet-Fed Offset Press
Analogical Transfer: A Practical Approach to Innovative Product Design
Improved Design of General Layout on Wide Format Thermal Transfer Printing Equipment
Selection of New Energy Vehicle Fuels and Life Cycle Assessment
Numerical Simulation and Experimental Study on Oil-Water Separation of Fiber Bundle Filter
A Short Analysis of the Interactive Design in the Modern Product Design
Study on Experimental Device of Removing TRS Gas with ClO2
Design of Test Bench for Automotive Leaf Spring
Rearview Mirror Product Design Based on Reverse Engineering Technology
Conceptual Product Design Methodology through Functional Analysis
Research of Fuzzy Cost Model for Selective Disassembly Planning
Design and Application of Online Calibration System for Automatic Verification Pipeline of Electric Energy Data Acquisition Terminal
Evaluation of Abaya Design Using Thermal Manikin
Chapter 18: Advanced Manufacturing Technology
Research on Workstation-Oriented Production Logistics Optimization of Chinese Discrete Manufacturing Enterprises
The Simulation and Optimization of Chain Tool Magazine Automatic Tool Change Process
Information Fusion of Multi-Source Isomerous NC Machining in Networked Manufacturing
Working Hours Calculation for CNC Milling Machining Center
The Complexity in Assembly Manufacturing System
A Vision of Cloud Manufacturing Service Paradigm for Group Manufacturing Companies: A Tendency of Manufacturing Resources Sharing
Ergonomics Simulation and Application in Production Assembly Line
Fiber Configuration of Air Jet Vortex Spinning Yarns
Chapter 19: Computer Applications and Mathematical Modeling
Design and Implementation of Authentication Server with High Concurrency
Research on Data Destruction Mechanism with Security Level in HDFS
OD-Characterization of Symmetric Group S57
Boost Keywords Conversion of Search Engine
Classify the Search Result Based on IBM OminiFind Edition and UIMA
A Searching Algorithm for Path Test Data Generation
The Research of Software Testers Training Mode Based on O-Ring Theory
Based on .Net Platform Framework Construction of MCN
A Comparison of Approaches to Opinion Mining
Convergence of Wavelet Expansions at Generalized Continuous Points
Design on Virtual Machine Frame of Cloud Computing Platform
The Weakly Chain Transitive Maps
The Research of Group Hierarchy Access Control in E-Government System
Research on Standard Domain and Non Standard Domain Based on SIP Protocol
A Novel Method Based on Ant Colony Optimization for Gene Selection
The Application and Development of the Internet of Things in Intelligent Buildings
Studying on the Industrial Competitiveness of Internet of Things in China's Provinces Based on Principal Component Analysis
Research the Influence of Entrepreneurs' Cognition on Dynamic Capability Based on Resources Restriction
On the Dynamical Properties of the Sun-Earth-Moon Restricted Four Body Problem
Construction of the Air Offensive Operation Battlefield Support System Based on the Internet of Things Technology
Structural Reliability Optimization Design Based on Artificial Neural Network
Software Design of Quartz Crystal Test and Sort System
Design and Analysis of Optimization Algorithm for a Class of Uncertain Linear System
Study of Solutions for a Non-Newtonian Filtration Equation with Nonlocal Boundary Condition
Integrated Lean Six Sigma Approach for Patient Flow Improvement in Hospital Emergency Department
Virtual Campus Roaming System Optimization Algorithms Based on Virtual Reality
Structural Reliability Optimization with Fourier Orthogonal Neural Network Method
Manage HTTP Session in Websphere Application Server V7 Cluster
The Design of Instant Messaging System Based on Qt-Android System
A Lightweight-Leveled Software Automated Test Framework
Chapter 20: Industrial Engineering and System Analysis
An Activity and Resource Advisory System for Manufacturing Process Chains Selection at the early Stage of Product Development
Reliability Modeling and Availability Simulating Based on GSPN Considering Hardware, Software and Human Factors
Study on Manufacturing Enterprises Distribution Center Location
Game Analysis on Bulit-In Outsourcing Alliance of Logistics
Study on Cross-Border Network Purchasing through Agents Risk Evaluation Index System
Non-Logistics Indicators Evaluation of Workshop Process Layout
Analysis and Application on Coupling Operation of Solar Water Heating-Boiling System
Studies on Small Pieces of Cargo Distribution by Intercity Passenger Bus
Efficiency and Economy Research of a Tunnel Kiln's Flue Gas Heat Exchanger
Performance Evaluation Research of Railway Fuel Supply Chain Based on the BSC-SCOR
Applying Lean Construction to Construction Project
Identification of Water Traffic Black Spot
The Managerial Strategies of Logistics Based on Three-Tier Control Mechanism
Study on Application of Combination Control Mode in Technological Transfer
Research on the Logistic Management under the Conditions of Industry Chain
An Economic Comparison between Electric and Conventional Vehicles Based on System Dynamics
Chapter 21: Engineering Management and Engineering Education
Profit Allocation and Realization in Regional Technology Transfer Alliance Based on Game Theory
Research on Core Competitiveness of Chinese Retail Industry Based on O2O
Research on Value Chain of China's Railway Oil Supply Chain
Research on the Selection of Logistics Service Innovation Mode Based on Industrial Clusters
Analysis of Production Management System of Electronic Manufacturing Industry
Study on the Countermeasures of Aviation Equipment Maintenance Knowledge Management
Study on Situation and Countermeasures of College Students' Self-Employment
The Cultivation of the Creative Talents of Normal University Based on Information Technology
The Construction of Engineering Projects Environmental Performance Auditing
Patent Storage Research of Cooperation between S&T-Oriented Small-Micro Enterprises and Universities in University-Industry-Government Based on EPQ Model with Shortage
「Nielsen BookData」 より