Modern technologies in industrial engineering : selected, peer reviewed papers from the Modern Technologies in Industrial Engineering, June 27-29, 2013, Sinaia, Romania
Author(s)
Bibliographic Information
Modern technologies in industrial engineering : selected, peer reviewed papers from the Modern Technologies in Industrial Engineering, June 27-29, 2013, Sinaia, Romania
（Advanced materials research, v. 837）
Trans Tech Publications, c2014
- : pbk
- Other Title
-
Modern technologies in industrial engineering : ModTech 2013
Available at / 2 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the ModTech International Conference on Modern Technologies in Industrial Engineering (ModTech 2013), June 27-29, 2013, Sinaia, Romania.
The 135 papers are grouped as follows:
Chapter 1: Engineering of Manufacturing Processes;
Chapter 2: Advanced in Composite Materials and Technologies;
Chapter 3: Characterization, Modeling and Simulation of Mechanical Processes;
Chapter 4: Robotics and Computer Integrated Manufacturing;
Chapter 5: Technology Transfer;
Chapter 6: Micro and Nano Technologies;
Chapter 7: Maritime Engineering and Navigation.
Table of Contents
Preface, Conference Committee and the Topics and Presidents
Chapter 1: Engineering of Manufacturing Processes
Improving of the Functional Parameters from Water Stations
A Study on Plastic Deformations due to Contact Fatigue Wear on a Metallic Coating Deposed in Electric Arc
Failure Mode and Effects Analysis on Control Equipment Using Fuzzy Theory
Profiling Method of Side Mill for Threading Screw for Dental Implants
Optimum Tool Life and Cutting Speed for the Maximum Productivity at the Drilling of the Steel X6CrNiTi18-10
Analysis of Surface Roughness for High Speed Milling of a Magnesium Alloy Part
Aspects of Transport Optimization in Holonic Enterprise
Process Smoothing of the Inner Surface of Cylinders after Honing and its Role in Eliminating Wear in the Activation of the Heat Engine
Some Peculiarities of the Redundant Design Solutions
Simulation of Arc Welding Process
Technique Achievement of Glass Objects Using Kiln Casting Method
Contributions on Design and Accomplishing of the Whirling Thread Cutting Devices that could be Adapted for Ordinary Lathes
Research Concerning the Cold-Hardening of the Teeth of a Toothed Gear at Cold Teething by Intermittent Blow
Intelligent Collaborative Platform for Testing a Product by Virtual Prototyping
Studies on the Hydrodynamic Flow through the Cylinder Valve
The Methods to Study the Influence of the Clearance in the Case of Great Speeds and Small Speeds
Influence of Tool - Semi-Product Friction on the Force Evolution at the Simulation of the Deformation Process with Flat Wedge Tools
Mechanical and Geometrical Characterization of the Conveyors Belts from Mineral Resources Exploitation
Recovery of Precious Metals from Catalytic Converters of Automobiles by Hydrometallurgical Solid-Liquid Extraction Processes
Determination of Constitutive Equation at the Deformation of Materials Using the Compression Test
Estimation of Reliability Characteristics in a Production Scheduling Model with Failures and Time-Changing Parameters Described by Gamma and Exponential Distributions
Installation for Determining the Nature of Excavated Material from the High-Capacity Belts of Mining Basins
Influence of Cutting Parameters on the Surface Quality of Round Parts Made from AZ61 Magnesium Alloy and Machined by Turning
The Influence of Burnishing Parameters on the Surface Quality of Bars Made from AZ61 Magnesium Alloy
Aspects Regarding the Hybrid Models in Engineering
The Study of Compression Engine Cycle Behavior in Terms of Variable Gazodynamic and Geometrical Configuration. Regime of the Maximum Economy
Quality Oriented Self-Optimizing Control in Smart Machining Systems
Issues Concerning Vibrations Reduction of the Industrial Drilling Machine in the Manufacturing Processes
Grapho-Analytical Determination of the Profile Disc Tool for Manufacturing of Complex Helicoidal Surfaces
The Influence of Complex Dynamic Phenomena Caused by Wind Action on Behaviour of Transportation Pipelines
Comparative Analysis of Different Methods in Residual Stress Measurement for Polymeric Parts
Analysis of the Linear Positioning Accuracy on Z Axis at the Horizontal Machining Centre TMA-AL-550
Thermal Runaway of the BaCO3 + Fe2O3 Homogenous Mixture and Mechanical Alloys at the Microwave Heating
Thermal Analysis to Evaluate Ageing Process in Heated Tool and Electrofusion Welding of Polymer Pipes
The Influence of the Feed Rate on the Quality of Surfaces Processed by AWJ at High Pressures
The Metal Sheets Processed by AWJ. Analysis of the Surface Quality
Studies Regarding Production of the Moulding Form from Calcined Gypsum
Researches for the Optimization of the Dehydration Process for Plums and Apricots
Modular Tooling System for Ultrasonic Assisted Cutting
Fuzzy Logic Applications in Flanges Manufacturing
Smart Engineering and Energy Saving Management in Edible Oil Processing Technology and Speciality Fats Industrial Application
Improved Model to Determine the Tool Life and the Cutting Speed for Minimum Cost at Drilling the Steel 10TiMoNiCr175
Chapter 2: Advanced in Composite Materials and Technologies
Protective Coatings on Carbon Steel
Comparison of Corrosion Behavior of Thin Layers from Copper, Aluminum and Chromium
Reseachers Concerning Stabilized Aluminium Foams Based on Silicon Carbide
A Comparative Analysis of New Ti-Nb-Zr-Ta Orthopedic Alloys
New Composite Materials that Reduce the Effect of Reinforcement Corrosion
Application of New Synthesized Materials Based on Anionic Clays for Industrial Effluent Decoloration
Research on Electromagnetic Properties of High Entropy Alloys
Investigation Techniques of In Situ AlMg/AlN Metal Matrix Composites via Reactive Gas Injection
Abrasive Wear of Fibre-Metal Composites Based on Fibreglass Woven Fabric Layer
Mechanical Properties of Fibre-Metal Composites Connected by Means of Bolt Joints
Chapter 3: Characterization, Modeling and Simulation of Mechanical Processes
FEA Study on the Elastic Deformation Process of a U-Shape Bimetal Actuator
A Matlab Neural Network Application for the Study of Working Conditions
The Stress Distribution of a Layered Contact Cam Mechanism Using Finite Element
Simulation and Performance Analysis of a FMS/CIM Using Stochastic Timed Petri Nets
Design and Manufacturing Preparation of a Patient Specific Acetabular Cage
Real-Time Monitoring Station for Production Systems
3D Conductive Textile Shields
Use of Finite Element Method in Optimization of Quay Crane's Grab
Geometric Analysis of Motions Exercised by the Stewart Platform
The Inverse Problem of Kinematics as the Tool for Determination of Motion Trajectories Exercised by Worm Drives of a Stewart Platform
Synthesis of Constructive-Functional Parameters to Improving the Dynamic Behavior of Automatic Mechanisms
UML Models of Design and Knowledge Representation for Technical Production Preparation Needs
Analysis of Simulated Welding Thermal Cycles S700MC Using Thermal Imaging Camera
About Variability of Using of Methods of the Shape Identification Based on Geometrical Correlation
A Survey on Capp Systems Development Methods
Virtual Analysis of the Mining Support under Loads of the Roof
The Aid of a Mistake Proofing with the use of Mechatronic Systems According to the Poka-Yoke Methodology
The Self-Excitation Phenomenon of Quasi Shielded Inductive Proximity Switches
Aspects Concerning the Dynamics of the Mechanisms with Clearances
The Model of Discrete Production Scheduling System in UML Notation - Classes Diagrams
The Graph Representation of Multivariant and Complex Processes for Production Scheduling
Theoretical and Data-Based Mathematical Model of a Special Vehicle Breaking System
A Method to Obtain a Generalized Model of the Pressure Evolution within the Braking System of a Vehicle
Original Computer Based Solutions in Structural Studies
Analysis of Compression Ignition Engine Cycle Based on Irreversible Thermodynamics
A Dynamic Model of the Human Body in the Vertical Direction
Assessment of a Traction Model for Agricultural Tires Based on a Variable Shear Area Model and Experimental Data
Short Term Prediction of Hydroelastic Dynamic Response in Random Waves for an 1100 TEU Container Ship
Transient Regimes Analysis for a Diesel Engine
Pressure Waves Simulation in Diesel Engine Injection System
Longitudinal Loop Power Flow Analysis on a 4x4 Transmission Vehicle Taking into Consideration the Running Track Type
Static and Dynamic Analysis of a Planetary Gearbox Working Process
Non-Intrusive Hybrid Energy Monitoring System
Design and Realization of a Sound Module for a Miniature Model Steam-Locomotive
Drying Simulation of Shrinkable Clay Tiles Using Variable Diffusivity Model
Complex 3D Measuring by Multiple Laser Scanning of Automotive Parts
Mathematical Model of the Damped Variable Cross Section Beam in Transportation
Chapter 4: Robotics and Computer Integrated Manufacturing
Controlling a Social Robot - Performing Nonverbal Communication through Facial Expressions
Functional Evaluation and Performance Improvement of a Gantry IR's NC Axes
Simulation of the Stewart Platform Carried out Using the Siemens NX and NI LabVIEW Programs
The Command of a Virtual Industrial Robot Using a Dedicated Haptic Interface
Mobile Robot Trajectory Analysis Using Computational Methods
An Overview on the Design of Mobile Robots with Hybrid Locomotion
Localization Methods for Mobile Robots - A Review
Kinematic Modelling and VR Simulation of a 3DOF Medical Parallel Robot with One Decoupled Motion
Preliminary Ideas on Designing an Unmanned Aerial Vehicle Based on Coanda Effect
Controlling the Movement of the Robot's Effector on the Plane Using the SVG Markup Language
Integration of a Virtual 3D Model of a Robot Manipulator with its Tangible Model (Phantom)
Design of Collaborative, Cross & Carry Mobile RoBots "C3Bots"
Dynamic Modelling of a 3DOF Medical Parallel Robot with One Decoupled Motion
Chapter 5: Technology Transfer
Business Ecosystems: Strategy Maps in Relation to Sustainable Development
Environmental Analysis Procedure for Implementation of Environmental Management System ISO 14001 in Shipping Company
Initiatives of Textile Industry Organizations towards Environmental Issues
Methods of Manufacturing Data Acquisition for Production Management - A Review
Model and Analysis of the Key Factors Influencing Organizational Changes Implementation within Business Processes
Assessment of the Risk Parameters and their use in the Vessels Traffic Management
Conceptual Research Model Regarding the Effects Resulted from the Implementation of Environmental Management System at Organization Level
Technological Entrepreneurship: Success Factors as Perceived by Potential Young Entrepreneurs
CFD Study on must of Grapes Separation in a Hydrocyclone
Cloud Computing Environment for Engineering and Business Education
Factors Influencing Employees' Motivation for Knowledge Communication
Market Oriented Approach to the Production Management on the Operational Level
The Importance of Understanding the Stakeholders in Industry Actions - A Corporate Social Responsibility Perspective
Chapter 6: Micro and Nano Technologies
Orthopaedic Prosthetic Systems Topographically Characterized at Nanometric Scale
ESD Garments with Bilayer Structure
Estimating ESD Properties of Fabrics Based on Correlation between Dielectric Losses and Charge Decay Time
Nanotechnology and Processes the Nanophotovoltaic Panels
Modeling of Strain and Stress States for Straight Rods with Particular Cross Sections Subjected to Torsion
Dilatometry and DTA Analyses of a Sample Made of Ni Base Super Alloy with a ZrO2/20%Y2O3 Ceramic Layer
The Influence of Thermal Treatment upon Nanostructure and Composition of YZrO Based Ceramics Obtained by Atmospheric Plasma Spraying
Considerations on the Micro-Indentation and Differential Scanning Calorimetry of Arboform Reinforced with Aramid Fibres
Chapter 7: Maritime Engineering and Navigation
Choosing the Optimum Method of Treating the Ballast Water Onboard Ships
Hertz Contact Problem between Wheel and Rail
Analysis of Rails of a Ferry Boat under Wheels Contact Loading
Statistical Model for Ultra-Wide Band Radio Channels Onboard Ship
A Study Initiated because of the Global Warming from R-134a
Processing of the Data Obtained with the Advanced Doppler Velocymeter
Energy Review on a Maritime Energy Transfer System for Comercial Use
Modern Education Facilities for CAD/CAM/CAE Training of the Future Maritime Engineers
Comparative Analysis of Tanker Ships Incidents and their Environment Impacts
Applying Determination Models for Human Errors in Sequential Analysis of Maritime Accidents
Transshipment Modeling and Simulation of Container Port Terminals
Different Methods of Refloating a Ship
by "Nielsen BookData"
