Materials, mechanical and manufacturing engineering : selected, peer reviewed papers from the 2013 International Conference on Materials, Mechanical and Manufacturing Engineering (IC3ME 2013), October 19-20, 2013, Guilin, China
著者
書誌事項
Materials, mechanical and manufacturing engineering : selected, peer reviewed papers from the 2013 International Conference on Materials, Mechanical and Manufacturing Engineering (IC3ME 2013), October 19-20, 2013, Guilin, China
（Advanced materials research, v. 842）
Trans Tech Publications, c2014
- : pbk
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the 2013 International Conference on Materials, Mechanical and Manufacturing Engineering (IC3ME 2013), October 19-20, 2013, Guilin, China.
The 162 papers are grouped as follows:
Chapter 1: Advanced Materials;
Chapter 2: Materials Processing Technologies;
Chapter 3: Mechanical Research;
Chapter 4: Products Design and Manufacture;
Chapter 5: Information Systems and Computer Applications;
Chapter 6: Related Topics
目次
Preface and Conference Organization
Chapter 1: Advanced Materials
Effect of Lithium Difluoro(oxalato)Borate-Based Electrolyte on the Performance of LiNi0.5Mn1.5O4 for High-Voltage Lithium-Ion Batteries
Research of Dispersant Quantity in each Stage of Grinding Calcium Carbonate
Study on Bamboo Culm Used for Structure Axial Compression Performance Numerical Simulation
Influence of Auxiliary Material on the Performance of the Resin Bond Used in Abrasive Tools
Effect and its Mechanisms of Hydrated Lime on Water Stability of Hot Asphalt Mixture
Effect of Al and Zn Content on the Preparation of Semisolid Mg-Al-Zn Magnesium Alloy
Effect of Microstructure on Mechanical Properties of High Carbon Steel Wire Rod
Preparation, Characterization and Magnetic Property of MFe2O4 (m=Mn, Zn, Ni, Co) Nanoparticles
Green Process for Preparing Cellulose/Reactive Epoxy (BGE) through an In Situ Chemical Blend (Pre-Hybrid Polymer Bio-Composite)
Improve Efficiency of Organic Solar Cell by Adding Dispersed ZnO Nanoparticles
Study on the Preparation of New Thickener in Reactive Printing
Numerical Simulation of Binary Alloy Crystal Growth Using Phase-Field Method
Ti (CN) Precipitation in Ultra-High Strength Ti Micro-Alloyed Steels with 700MPa Yield Strength on TSCR Process
Emulsion Polymerization of Methyl Methacrylate and Butyl Acrylate Using Non-Ionic Polyurethane as Emulsifier
The Component Analysis of Penetration Sealer Materials
Effect of Sintering Aids on the Densification of Andalusite Ceramics
Magnesium Ferrite Powder and its Composite Electrospinning Nano-Fiber Preparation
Comparison of Prediction Models for Concrete Carbonation
The Influence of Surface Active Agent on Zn Base Brazing Filler Metal Soft Solder
Encapsulation of Vitamin E in Glassy Carbohydrates by Extrusion
Applications of Wood-Plastic Composites (WPC) in the Design of Multimedia Speaker Box
Localized Electrochemical Corrosion Characteristics of Carbon Steel in Seawater
Preparation and Mechanical Properties of Short Antheraea pernyi Silk Fiber Reinforced Onion Composite
Tribological Properties of Ti-Al Alloy Self-Lubricating Composite Materials
Diffusion Dynamics of HAc from Cellulose Acetate Filament during Coagulation Process
Microstructure Evolution of Hypereutectic Al-Si Alloy in Semi-Solid Compression Deformation
Effects of Tourmaline Powder on Growth Activity of Marine Bacteria and Diatoms
Molecular Simulation Study Conformation and Energy of Polyaniline/Graphite Composites
Synthesis and Characterization of Cellulose/Quaternary Phosphonium Salt
Study on Structure Design and Properties of Super Absorbent Copolymerized with Milk Protein Grafted Acrylic Acid
Preparation, Characterization of Supported Phosphotungstic Acid HPW-MCM-48 and Photocatalytic Degradation of Aqueous Methyl Orange
Boundary Element Analysis of Accelerated Chloride Diffusion in High Performance Concrete
Different Performance of Foam Concrete Caused by Two Types of Fiber
Study on Color Change of Brown Sapphire in Changle, Shandong
Tensile Properties of 15wt. %TiB2/7055 Composite Fabricated by In Situ Method
The Complexation of Calix[6]Arene Sulfoxide Derivative with Uranium
Adsorption of Cr (VI) by Cross-Linked Magnetic Hydroxamated Chitosan
Sulfur and Lead Isotopic Geochemistry of the Shidi Pb-Zn Deposit in Xiushan County, Chongqing
The Kinetics Studies for the Adsorption of Furadan from Aqueous Solution by Orange Peel
Electro-Thermal Effect Analysis on GaAs PHEMT Based on Physical Model
Progress of the Current Interface Research on Carbon Nanotubes Reinforced Aluminum-Matrix Composites
Creep Properties and Life Estimation of P91 Steel with Low Hardness
Half-Metallic and Optical Properties of Cu and Cr Codoped AlN
Determination of Fluoride in Antarctic Krill Euphausia superba Using Ion Chromatography
Preparation and Characterization of Double Activity Sulfate-Gallate Bagasse Xylan
Effect of Sintering Time on the Mechanical Properties of WC-8Co Cemented Carbide for Friction Stir Welding Tool
Influencing Factors and Conditions on the Synthesis of Double Activity Sulfate-Gallate Bagasse Xylan
Preparation Process of Green Ceramic Coating of Magnesium Alloy through Micro-Arc Oxidation
Impact Properties of Particulate Reinforced Aluminum Matrix Composites
Charaterization and Catalytic Activity of CuO and NiO Supported on ZrO2 for CO Low Temperature Oxidation
Characterization and Microwave Absorption Performance of CNTs/Fe3O4/PANI Nanocomposites
Study on High Order TiO2 Nanotube Arrays and the Mechanical Properties
Chapter 2: Materials Processing Technologies
Synthesis and Exchange for Li+ of Spinel Type Material LiMn0.75Ti0.5O3
The Synthesis and Ion-Exchange Property of Li0.5Mn1.375O3
Study of an Inorganic Ion Exchanger LiMn1.25O3
Prepare and Properties of Titanium with Surface Nanostructure by High Energy Shot Peening
Study of Adhesive Curing Pressure in Process of Ferrite Phase Shifter
Effect of Artificial Aging on Intergranular Corrosion of 6063 Al Alloy
Grain Refinement of Mg97Y2Cu1 Alloy Solidified with Pulsed Direct Current Magnetic Field
Springback Experimental Research of Advanced High-Strength Steel
Direct Synthesis and Characterization of Three-Dimensional Graphene Foam
Nd,Yb:YAG Laser Crystal Production and its Property
The Synthesis of a Polyaspartic Acid Ester and Development of the Coatings
Effect of Interlayers on the Structure and Properties of TiAlSiN Coatings Deposited on High-Speed Steel Substrate
An Investigation of Carburized Layers on Austenitic Stainless Steels
Effect of Cold Spray Processes on Friction Stir Welded Microstructures of AZ31 Magnesium Alloys
Ceramic Powder (Silicon Carbide) - Monitoring and Influencing Process its Production
The Preparation of Color Ink-Jet Paper Coating and the Investigation of its Printing Quality
An Experimental Study on Synthesizing TiC-10Ni Composite Coating Using Electro-Thermal Explosion Ultra-High Speed Spraying
Effects of Mechanical Vibration and Pouring Temperature on Solidified Structure of Superalloy K4169
GPU Accelerated Finite Element Simulation for Ultra-High Strength Steel Quenching
Managing Varnish of Turbine Oil
Chapter 3: Mechanical Research
The Dynamic Simulation of Engine Slider-Crank Mechanism Based on ANSYS and ADAMS
The Dynamics Simulation of Tracked Vehicles on the Hard and Soft Ground Based on the RecurDyn
A Calibration Approach for the Parallel Kinematics Machines Tools Based on Error Sensitivity Analysis
The Particle Motion and Power Theory Analysis of Centrifugal Field
An Approach for Continuous Small Line Blocks High Speed Machining of Embedded Systems
Fatigue Crack Prediction of LC9 with Corrosion Damage Considering Effect of Load Frequency
Resonance Reliability Sensitivity Analysis for Random Cam Mechanism System
Using Stress Relaxation Data to Predict Creep Behavior
Experiment Verification and Model Analysis of Partially-Filled Liquid Tank under Different Liquid Level
Study on Modeling Method and Characteristics of Bearing System with High Rotation Speed
Analysis of Equivalent Parameters for Honeycomb Sandwich Mirror
Application of Hidden Markov Models in Ball Mill Gearbox for Fault Diagnosis
Mechanical Properties Analysis for Compression Equipment of Underground Lifting Compression Processing Station
Four-Order Parabolic Transmission Error Design of Helical Gear Based on Meshing Area
Finite Element Analysis on the Directly Buried Heating Bent Pipeline with Many Break Angles
Small Line Segment Interpolation Algorithm for Smoothing Machining
Finite Element Analysis of Crystal Furnace Based on ANSYS Workbench
Research on a Variable Degree of Freedom Luffing Mechanism, Part I
Research on a Variable Degree of Freedom Luffing Mechanism, Part II
The Calculation of Train Slipstreams on Platform of Underground High-Speed Rail Station
Numerical Simulation of Free Surface Flows by Using Weakly Compressible Corrected MPS Method
Analytical Prediction Model for Fatigue Crack Propagation Rate under Tension-Compression Loading
Elastic-Plastic State of Inhomogeneous Soil Array with a Spherical Cavity
Tensile Properties of Friction Stir Welding Aluminum Alloys Used in Aviation
Crack Propagation in Concrete with Silica Particles
Comparison between Experiments and FEM Simulations of the Reinforced Concrete Structure under Shake Table Test
Parameter Identification of a Stress Relaxation Model Based on Differential Evolution Algorithm
Studies on Mechanical Properties of Mulberry Branches Scrimber
Health Evaluation for Durability of Harbor Engineering in South China Based on AHP
Determination of a Loading Pressure in the Metal Forming by the Given Movements
Skid Line Prediction in Automobile Panel Forming Process
Structural Behaviour of Single Layer Space Frame with Member Arrangement Following Spiral Phyllotaxis
Chapter 4: Products Design and Manufacture
A Study of a New Seat-Suspension of Commercial Vehicles Using Magneto-Rheological Dampers
A 3D Numerical Investigation on Droplets Distribution in a Wave-Plate Separator
Simulation on Linear-Motor-Driven Water Hydraulic Reciprocating Plunger Pump
Thermal Design Improvements on Avionic Device in Confined Space under Supersonic Conditions
Research and Design of the Control System for Natural Gas Heater
Efficient Recursive Dynamics and Real Time Simulation of Flexible Space Robots System
Method of Holes Machining Path Optimization for NC Turret Punch Press
The Development of Robot for Work of Drainpipe Deposit Cleaning
Kinematics of a New 14 DOF Humanoid Biped Robot
Optimization and Simulation on Pressure-Reducing Valve in Water Hydraulic Vane Pump
Influence of Port Plate Closed-Compression Angle on the Vibration and Noise of a Water Hydraulic Piston Pump
Dynamic Response of a Main Shaft System of Francis Turbine-Generator Units
Element Bearing Ratio Based Shakedown Analysis for Branch Pipe
Finite Element Analysis and Structural Optimization of Mine Man-Car Skip Underframe
Research on the Flexible Product Platform Technology of Machining Center
Method of Tool Path Optimization in Impeller NC Machining Based on Configuration Space Theory
Modal Analysis and Fault Diagnosis of Dynamic Machine Foundation under Ambient Excitation
Accurate Mathematical Model of Profile Curve Generated by Pre-Grinding Hob and Three-Dimensional Simulation of the Gear Generation
The Virtual Prototype Dynamic Simulation Design for the Lunar Vehicle Based on ADAMS
Mechanism Design of the Automatic Adjustment of the Number of Inserting Fuses of the Inserting Fuse Machine for Firecracker
Structure Design and Optimization of the Metal Spoon Cross Rolling Mills
Boring-Rolling Process Research and Tooling Design of Hydraulic Cylinder
Application of UG/WAVE Technology in the Design of Automobile Front Axle
Researcher on Manufacturing Surface of Air Compressor Cylinder by Vibration and Mechanism of Lubrication
Chapter 5: Information Systems and Computer Applications
The Analysis of Similarity Measure Function in Image Matching Algorithms
The Research and Application on Illumination Model Algorithm of Oilfield Virtual Reality System
A New Method of Expressing Point Model Based on Kd-Tree for Plane Area
The Seawater Quality Evaluating of the Yangtze Estuary Wetland Based on BP Neural Networks
OSK Digital Circuit Design for a 14-bit 2.5 GSPS RF-DDS
SAR Image Denoising Using an Improved Adaptive Bitateral Filter
Design and Practice Research of Sports Injury Network Consulting System
Design and Development of Physical Education Teaching Network Courses in Colleges and Universities
Design and Application of Real-Time Flight Information Acquisition System
Development of Computer-Aided Design Module for Mechanical Products Based on AutoCAD
Research on the Facilities Layout Planning in MTO Manufacturing Industry Based on Genetic Algorithm
Design of Smart Home Management System Based on GSM and Zigbee
A Novel Traffic Flow Forecasting Method Based on the Artificial Neural Networks and Intelligent Transportation Systems Data Mining
Study on Data Compression Algorithm Based on Semantic Analysis
Chapter 6: Related Topics
Application Research of Memory Alloy Washer on Power Equipment Safety and Energy Saving
Behavior of the Spruce and Birch Wood from the Fire Safety Point of View
The Flooding Tolerance and Growth Characteristics of 2 Woody Species by Flooding Durations for Aquatic Ecosystem Restoration
Comparative and Study the Influence of Sand Depth for Liquefied Evaluation
Investigation of Silicone Oil Leaching in PDMS Fouling Release Coating by Confocal Laser Scanning Microscope
Research on Surface Roughness Measurement of ACSR Using Light-Section Microscope
A Novel Sparse Weighted Least Squares Support Vector Classifier
Inverse Generalized Harmonic Numbers with Riordan Arrays
Empirical Research on Business Intelligence Success
Exploring the Effect of Organizational Dynamic Capability on Data Quality-BI Success Relationship
Solving the Lower Reliability Confidence Limit of Binomial Distribution by Using Numeric Iteration Method
Spillage Control Method in the Production Process of Argon Oxygen Smelting Low-Carbon Ferrochrome
Reform and Practice in Major-Division Engineering Training Model Based on Project-Driven
Effect on Tailing Dam Stability of Rainfall Infiltration
Experimental Study on Direct Shear Creep Characteristics and Long-Term Strength of Red Layer Sliding Zone Soil in Southern Hunan
Project Teaching Reform and Practice in the Art and Design Course
Power Transfer Coefficients between Two 3D Semi-Infinite Solids in EFEA Formulation
Modeling, Analysing and Simulation - Way to Good Operation Phase of Residential Stock
The Evolution and Discriminate Analysis of the SPT Discrimination Methods in Code of Seismic Design of Building in China
The Applicability of Code for Characteristic Depth in Liquefied Evaluation
「Nielsen BookData」 より