Material science and advanced technologies in manufacturing : selected, peer reviewed papers from the 3[rd] International Conference on Materials Science and Engineering (ICMSE 2014), January 24-26, 2014, Jiujiang, China
著者
書誌事項
Material science and advanced technologies in manufacturing : selected, peer reviewed papers from the 3[rd] International Conference on Materials Science and Engineering (ICMSE 2014), January 24-26, 2014, Jiujiang, China
（Advanced materials research, v. 852）
Trans Tech Publications, c2014
- : pbk
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
[rd]: superscript
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the 3rd International Conference on Materials Science and Engineering (ICMSE 2014), January 24-26, 2014, Jiujiang, China.
The 163 papers are grouped as follows:
Chapter 1: Chemical Materials and Technologies;
Chapter 2: Composite Materials and Technologies;
Chapter 3: Alloys, Metal Materials and Technologies;
Chapter 4: Biomaterials, Natural Materials and Technologies;
Chapter 5: Materials Optical, Magnetic and Electrical Properties and Technologies, Films and Devices Applications;
Chapter 6: Wireless, Sensors, Network and Communication Technologies, Image Technologies Applications;
Chapter 7: Monitoring, Detection and Recognition Technologies;
Chapter 8: Control and Guided Systems;
Chapter 9: Dynamics and Mechanics of Physical Processes and Behavior in Manufacturing and Materials;
Chapter 10: Advanced Technologies in Manufacturing, Mechanical Engineering and Industry, Design, Modeling, Analysis and Simulation;
Chapter 11: Power Engineering and Drive Systems;
Chapter 12: Automation, Optimization, Algorithms in Manufacturing and Industry, Applications;
Chapter 13: Recycling Applications, Environmental Research, Alternative Fuel;
Chapter 14: Applied Geological Research
目次
Preface, Organizing Committees and Sponsors
Chapter 1: Chemical Materials and Technologies
Research on Mechanism in the SNCR DeNox Process
Chemical Constituents from Cremanthodium potaninii
Investigation of Low Temperature Sintering of Low Voltage Varistor Based on TiO2
Direct Immobilization of Glucose Oxidase on the Hydrophilic Copolymer Support Containing Oxirane
Ablation Properties of ZrO2-MgO and Mo Nozzle Produced by Plasma Spray Forming
Identification of Unknown Sediment in Water-Reducer
Removal Polyacrylamide from Oil Recovery Wastewater by -Fe2O3 Magnetic Particles
Zinc Oxide Production Technology of Distillation Twice Based on Scrap Miscellaneous Zinc Materials
Comparison of Cellulose Pyrolysis in Molten NaOH, Ca (OH)2 and Composite Alkali
Effect of Aluminium Powder Additives upon CO2 Reactivity of Electrolytic Aluminium Carbon Anode with Calcined Anthracite
Preparation of TiO2-ACF by Electrospinning and its Adsorption Performance for Low Concentration SO2
The Effect of Coating Agent and Preparation on the Thermostability of Coated Potassium Chlorate
Crystal Structure and Synthesis of {[Cu(L)nX][X] (H2O)2} L= benz,n=3
Dynamic Recrystallization Behavior of Pure Titanium
Reaction Heat of High Alkali Aluminosilicate Glass Batches in Melting Process
Nano-Rheology and its Application in Controlled-Release Fragrance Nanocapsules Suspensions
Optimization of Process Parameters for a Uniform Ultrasonic Spraying through the Taguchi Experimental Design
Review of Advanced Technology of Flue Gas Desulphurization
Preparation and Stability Studies of a Desulfurizer Loaded on Porous Silica Gel
Preparation and Properties of Copper Antibacterial Silica
Preparation and Microstructure of Exfoliated Graphite with Large Expanding Volume by Two-Step Intercalation
Wasted Low Grade Iron Ore with High Phosphorus Reuse for Phosphate Removal from Aqueous Solution by Using a Factorial Design
University Server Room Creep Corrosion Prevention
Chapter 2: Composite Materials and Technologies
Preparation and Properties of Porous poly(vinyl alcohol)/Powdered Activated Carbon Composite
Dissolution of Tungsten Carbide in Remanufacturing Coating by Plasma Spray Welding
The Research on Thermal Residual Stress of SiCp/Al Composites
3-D Framework {[Cu(L)nX][X] (H2O)2} L= bipy,n=2 Constructed through C-H....Cl Hydrogen Bondings and - Interactions
Research on the Engineering Properties of Fly Ash as Backfill
Theoretical Analysis on Resistance-Temperature Characteristic of Ni/HCl-PANI Composites
The Impact on the Polypropylene Matrix Composites by the Cutting Size of the Automotive Interior Decoration Scrap
Effects of La2O3 on Microstructure and Wear Properties of Thermal Clad NiCoW/ La2O3 Composite Coatings
Effect of Pre-Wetting Super-Light Aggregate Reinforced Aerated Concrete
Chapter 3: Alloys, Metal Materials and Technologies
Effect of Niobium on the Morphology of Nodular Graphite in Ductile Iron
The Residual Stress after High Frequency Induction Welding with Complex Shapes WC-Co Alloy and Steel
Characterization of Recycled Cemented Carbide and the Raw Materials
Interface Microstructure and Properties of 304 Austenite Stainless Steel/Low Carbon Steel Clad Plate by Casting and Hot Rolling Process
Thermodynamic Optimization Design of Casting Mg-Zn-Cu Alloy
Microstructure and Hardness Distribution of Ductile Iron by PTA Cr-Ni-Mo-Cu Alloying
First-Principle Study of Atomic Structures of Fe/TMC (TM=Ti, Zr and Hf) Interface
First-Principles Study of the Mechanical Properties of ScAl Microalloyed by 4d-Transition Metals
Investigation into the Post-Treatment Process for Titanium Alloy Space-Curve Meshing-Wheel
Influence of the Electric Current Pulse with Different Pulse Width on the Eutectoid Microstructure of Hypoeutectic Fe-C Alloys
Microstructural and Mechanical Properties of Al 7003 Alloy Processed by Dual Equal Channel Lateral Extrusion
Tribological Properties of FeNiCr Coatings with the Addition of La2O3 on 1045 Carbon Steel
Effect of Solution Temperature on Grain Size in a Mg-4Y-3Nd-3Dy-0.5Zr Alloy
Halide Activators Suitable for Low Temperature Pack Aluminisation of Electroplated Nickel on Creep Resistant Ferritic Steels
Research and Application on Parameter Optimizing of Oxygen Lance Nozzle on Converter for Semi-Steel Making
A Method for Welding Deviation Acquisition Based on Magnetic-Control Arc Sensing for Multi-Pass Welding
Effect of Wall Thickness of the Billet on 1Cr18Ni9 Stainless Steel Tube Stagger Spinning Process
Chapter 4: Biomaterials, Natural Materials and Technologies
Characterization of Calcium Phosphate with an Anodic TiO2 Nanotube Layer on Titanium Screw for Biomedical Application
Preparation of Environment-Friendly Epoxidized Corn Oil as a Plasticizer
Study on Destroying Enzyme in Chestnuts (Castanea mollissima Blume) by Microwave Heating
Determination of Diflubenzuron Residues in Vegetables by UPLC-MS/MS
Determination of Chlorbenzuron Residues in Tea by UPLC-MS/MS
Determination of Imidacloprid Residues in Chinese Cabbage by UPLC-MS/MS
Flavonoids and Cytotoxic Activity of Gentiana algida Pall
Chapter 5: Materials Optical, Magnetic and Electrical Properties and Technologies, Films and Devices Applications
Preparation and Electrical Properties of Multilayer Zinc Oxide Varistor by Gelcasting
Ultraviolet Photodetectors Based on MgZnO Thin Films
High Precision Fiber DFB Laser Micro-Accelerometer
The Research on Conductive Fibers Configuration of Antistatic Fabric
Effect of Electron Beam Irradiation Crosslinking on PVA Films
Study on Microstructure and Tribological Properties of Graphite-Like Carbon Films
Effect of Annealing Temperature on Structural and Optical Properties of (Cu, Al):ZnO Thin Film by Sol-Gel Method
High-Performance Indium Oxide Thin Film Transistor with ITO Source/Drain Electrodes Fabricated by Reactive Sputtering
Chapter 6: Wireless, Sensors, Network and Communication Technologies, Image Technologies Applications
Soundscape of Public Space and Design Method
Research and Application of Information Operation and Maintenance Fault Diagnosis Model for Power Grid Enterprise
Software Design Methods Research on Configuration Technology
A Kind of Traffic Light Controller Simulation Design
The Design of Speed Acquisition and Prompt System Based on STC89C52
Music Spectrum Display System Based on MCU
Adaptive USB Fast Charger Design Based on Quick Charge 2.0 Protocol
Chapter 7: Monitoring, Detection and Recognition Technologies
Study on Micro-Deformation Monitoring Technology of Contacts for Electric Connectors
Two-Dimensional Numerical Research on the Ablation Effects of Silver Target Bombarded by TEMP Type Accelerator
Research on Optical Feature Recognition Technology of Multiple Micro-Holes
Chapter 8: Control and Guided Systems
Design and Implementation of Gas Stove and Range Hood Integrated Intelligent Control System
Design and Simulation of the Hydraulic Loading Control System of the Rolling Bearing Fatigue Life Testing Machine
A Robust Adaptive Sliding Mode Control Method for Attitude Control of the Quad-Rotor
Principles and Implementations of Three-Level Control SCADA System for Oil and Gas Pipelines
Study on Unbalance Compensation Control of STATCOM Based on MMC
Variable Frequency and Multi-Pressure Water Supply Control System Based on STM32 Processor
Fuzzy Control of Z-Source PV Grid-Connected Using Constant Frequency Hysteresis Comparison
Chapter 9: Dynamics and Mechanics of Physical Processes and Behavior in Manufacturing and Materials
Stability Modeling and Analysis of Orthogonal Turn-Milling with Variable Cutting Depth and Cutting Thickness
Thermal Stress Compensation of MgO Concrete in Construction of High Arch Dams in Cold Areas
The Study on the Compensation for Displacement of Multi-Way Valve Main Spool
Test Research of Vertical Machine Center's Geometrical Accuracy Stabilization
Mechanical Properties of Sandstone under Loading and Unloading Conditions
Finite Element Analysis for the Welding Column of CNC Boring Machine
Comparison of the Bearing Capacity of Dry and Wet Cutting Surfaces
Prediction of Cutting Force in Trochoidal Milling Based on Radial Depth of Cut
Laser Transmission Welding of Thermoplastic: Effect of Process Parameters on Weld Strength
Dynamic Analysis of Bionic Vibration Isolation Platform Based on Viscoelastic Materials
The Factors Sensitivity Analysis of Drift Ice Impact Force on the Pier
Experimental Study on the Impact of Cutting Speed on Surface Integrity of Ti-10V-2Fe-3Al
Work Hardening of the Isotactic Polypropylene during Rolling
Experimental Study on Impact Damper with Activated Carbon Fine Particles
Experimental Research on the Preparation of Heat-Resistant Concrete Using Normal Portland Cement
The Effect of Air Pressure on the Evolution of Fiber Path in Melt-Blowing Process
A Numerical Study on Hollow Droplets Impact onto a Solid Substrate
The Research of Hydraulic Characteristics of High Water Cut Crude Oil Pipeline in Sabei Oilfield
Quantum Discord of Coupling Qubits in Decoherence-Free Subspace and Squeezed Vacuum Reservoir
The Motion Attitude Analysis of High-Speed Tracked Vehicle Climbing over Vertical Wall
Chapter 10: Advanced Technologies in Manufacturing, Mechanical Engineering and Industry, Design, Modeling, Analysis and Simulation
Finite Element Simulation and Experimental Research in Insulation Spacer Blanking
Research of Sled Motorcycle Model Design
The Numerical Control Turning Processing Fixture Design U-Shaped Thin-Wall Parts
Study on the Numerical Simulation of Fillet Radius of V-Shaped Anvil Edge Influencing Quality of TC4 Heavy Long-Axis Forgings in Squaring Process
Vibration Analysis and Research on Air Bearing Block of CMM
The Complex Housing Injection Mold Design of Automobile Based on UG and Numerical Simulation
Electric Film Based on the Design of the New Electrothermal Furnace
Innovative of the Clean Trolley Based on Autodesk Inventor Professional
Forecast on Upsetting Crack Based on Numerical Simulation
Optimum Design of Remote Controller Back Shell Injection Mould Based on Flow Simulation
Theoretic and Experimental Research of Crankshafts Barrel Finishing
Influence of Wire Grid on the Cone Calorimeter Results of Textile Fabrics
3D Numerical Analysis about Effect of Seal Clearance on Labyrinth Seal Performance
The Nonlinear Phenomenon in Modal Analysis of Liquid Tank
Study on Main Function and Key Technology of Enterprises Contingency Plan Virtual Drill System Based on Virtools
Modeling of Direct Current Atmospheric Pressure Argon Discharge in Two-Dimensional
Numerical Analysis on Temperature Field of Electric Connectors
Performance Analysis of Chaotic Spread Spectrum Sequences
Computer Simulation of Pore-Water Pressure
TQLZ Self-Balance Vibrating Screen Static and Modal Analysis
Jet Repulsion in Multi-Jet Electrospinning Systems: From Needle to Needleless
Coupled Thermal Analysis on Carbide Anvil of Cubic Press
A New Approach to Assemble Tolerance Analysis Based on CE/TOL
Pro/ENGINEER and 3DS Max Combined with Virtools for Virtual Reality Application
Investigation of Flammable Behavior of Nylon 6 Fabrics with and without Spandex Using Cone Calorimeter Test and Vertical Burning Test
Chromatic Adaptation and Chromatic Adaptation Transform Issues in Color Appearance Model
Chapter 11: Power Engineering and Drive Systems
Study on Coordinating Control Strategy of Hybrid Cascade Energy Storage and Bi-Directional Power Regulation Device
Research on Inductive Power Charging Device of Unmanned Ground Vehicle
Design and Simulation on Hydraulic Sleepless Speed Regulation System of Invariable Fertilizing Application
Distributed Photovoltaic Power Generation System Design and Grid Research
Wide-Area Time-Delay Coordinating Control of Generator Excitations and SVCs Based on Hamiltonian Functional Method
The Lagrangian of Analytical Mechanics and its Application in Power System with TCSC
ARM-Based Speed Regulating System for Asynchronous Motor
Research on Improved Small-Disturbance Model of Doubly-Fed Wind Generator
The Design Study on a Novel MW Wind Power Generation Speed-Up Machine
Optimization of Smoothing Control in Hybrid Wind and Battery Energy Storage System
An Improved Newton's Method and its Application in Power System
Chapter 12: Automation, Optimization, Algorithms in Manufacturing and Industry, Applications
Multi-Objective Programming and Time Optimal Algorithm Research
Optimal Planning of Distributed Generation Using Self-Organizing Optimization Algorithm
Design and Analysis of High Availability Power Grid Dispatching Automation System Based on Virtualization Technology
Optimization of Parameters of Aircraft Landing Gear with Orthogonal Turn-Milling Based on GRA-PSO Algorithm
The Application Base on Frame Optimization Method in the Rectangular Hole Group Position Error
The Analysis of Circuit Breaker Health Index and the Characteristic Quantity
Bath Central Heating and Air Conditioning Systems Economic Analysis
Optimization of Exit Design Based on Evacuation Model for Limited Visibility
Chapter 13: Recycling Applications, Environmental Research, Alternative Fuel
Ecological-Economic Values of Lignocellulosic Herbaceous Plant on Contaminated Land
Manufacture of RDF (Refuse Derived Fuel) by Carbon Ash from the Waste Tire Pyrolysis Resource Chemical Plant
The Wide-Applicant Feasibility Study of RDF (Refuse Derived Fuel) - Example for Carbon Ash after the Waste Tire Pyrolysis T
The Key-Factor Modulation of Waste Tire Pyrolysis in Resource Chemical Plant for Recovered Fuel Production
The Applicant Feasibility Study of Recovered Fuel after Waste Tire Pyrolysis
Pollutants Concentrations in Ambient Air and their Relationship in the Spring of Beijing
Research on Preparation and Properties of Biodiesel
Two-Phase Mesophilic Anaerobic Co-Digestion of Food Waste and Sewage Sludge: Effect of Hydraulic Retention Time
Accelerated Biodegradation of PLA Nonwovens in Soil Bacterial Suspensions
Characteristics of Particulate Matter about Emissions in a Heavy-Duty Diesel Engine with Biodiesel Blends
Influence of Post Injection on Emission Characteristics of a High-Pressure Common-Rail Diesel Engine Fueled with Biodiesel Blends
Study on Construction Technology of Drain Board for Foundation Covered with Thicker Hardpan
Chapter 14: Applied Geological Research
Study on the Relation between the Deep and the Spontaneous Combustion of Coal Seam
Model Experiment Study on Anti-Explosion Characteristics of Underground Caverns Reinforced by External Cross-Anchoring
Numerical Simulation of Heat Transfer from Hot Dry Rock to Water Flowing through a Circulation Fracture
Application of Numerical Simulation in Reinforcement of Caverns Underground by External Cross-Anchoring
Theoretical Model of Moisture Migration in Frost Soil Material
「Nielsen BookData」 より
