Materials science, machinery and energy engineering : selected, peer reviewed papers from the 2013 International Conference on Materials Science, Machinery and Energy Engineering (MSMEE 2013), December 24-25, 2013, Hong Kong

著者

• International Conference on Materials Science, Machinery and Energy Engineering
• Yang, Guohui

書誌事項

Materials science, machinery and energy engineering : selected, peer reviewed papers from the 2013 International Conference on Materials Science, Machinery and Energy Engineering (MSMEE 2013), December 24-25, 2013, Hong Kong

edited by Guohui Yang

（Advanced materials research, v. 853）

Trans Tech Publications, c2014

• : pbk

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). Collection of selected, peer reviewed papers from the 2013 International Conference on Materials Science, Machinery and Energy Engineering (MSMEE 2013), December 24-25, 2013, Hong Kong. The 120 papers are grouped as follows: Chapter 1: Polymer Materials and Composite Materials; Chapter 2: Metals Materials and Building Materials; Chapter 3: Biochemistry Materials and Engineering; Chapter 4: Energy Science and Environmental Engineering; Chapter 5: Manufacturing Science and Engineering; Chapter 6: Mechatronics and Microelectronics; Chapter 7: Computer and Internet Application

目次

Preface and Organizing Committee Chapter 1: Polymer Materials and Composite Materials Effect of Polymeric Combinations on Mucoadhesive and Swelling Properties of Orabase Gel Formulations Power Law and Stretched Exponential Responses in Composite Solids Facile Synthesis and Optical Properties of TiN/Al Composite Powders with Nano/Microstructure by Ball-Milling Method A Study of Reaction Viscosity Changes in Electronic Packaging with Different Nanoparticle Strengthened Epoxy Matrices The Effects of Chemical Resistance for Nanocomposite Materials via Nano-Silica Addition into Glass Fiber/Epoxy Influences of Nano-Silica Addition on Diluent/Epoxy Mechanical Properties Effects of Nano-Silica Addition on Water Absorption of Glass Fiber/Epoxy Composite Effects of Nano-Silica Addition and Reactive Diluent Addition on Dynamic Mechanical Properties of Epoxy Nanocomposites Structural Reorganization in Thin Films of High Molecular Weight Block Copolymer Self-Assembly The Research of AlN-Mo Nano Composite Ceram Formation of Thermally Induced Defects in Silica Optical Material Properties and Application of Alumina Reinforced Aluminum Composite Preparation and Characterization of Diatomite Supported Cu-Doped TiO2 Photocatalysts Fabrication of Nano-branched Coaxial Polyaniline / Polyvinylidene Fluoride Fibers via Electrospinning for Strain Sensor Excellent Electrochemical Performance and Thermal Stability of LiNi0.5Mn1.5O4 Thin-Film Cathode Prepared by Pulsed Laser Deposition Investigation on Soldering High Volume Fraction SiC Particle Reinforced Aluminum Metal Matrix Composites The Preparation and Properties of the Conductive and Magnetic Tin-Coated Polyester Fibers for Clothing Preparation and Characterization of Porous Carbon/Nickle Nanofibers by Electrospinning Devitrification and Recrystallization of Aqueous Glycerol and PEG-600 Solutions with Nanoparticles Coupling {001} Facets Dominated Anatase TiO2 Nanosheets with CNTs for Efficient Photocatalyst Comparison of Ni0.8Cu0.2Ox Anode Material Prepared with Sol-Gel Method and Ni0.8-Cu0.2-Coated YSZ Composite Anode Material Prepared with Polyol Method Chapter 2: Metals Materials and Building Materials Thermo-Mechanical Behavior Analysis of Pressure Infiltration Casting Process for Manufacturing Open-Cell Metal Foam DC Magnetron Sputtering of B2 Phase Feal(111) Single-Crystal-Like Films and Hydrogen Damage Behavior Investigations on Residual Stress Distribution for 2A02 Aluminum Forgings Effect of Pile-Up on Nanoindentation Measurements of Polycrystalline Bulk Metals The Experiment Study on Adherence Capability between New and Old Concrete of Pavement Corrosion Behaviors and Mechanical Properties of CrN Film Effect of Process Parameters on Porosity of Intermetallic NbCr2 Porous Materials Numerical Simulation Study on the Cement-Based Absorbing Material Underground Engineering Avoid Incision and Reinforced Technology and Engineering Application Experimental Research on Aluminum Foam Dynamics Performance Bulk Permanent Magnet with Enhanced Anisotropy Fabricated by Magnetic Annealing from Fe-B-Nd-Nb Bulk Metallic Glass Precursor Mixed-Mode I/III Fracture Characterization of Aluminum Alloy The Oxidation Mechanism of FeCrAl Alloy Added with Rare Earth Y from First-Principle Study Development of Integrated Experiment Program for Marine Concrete Durability A Study on Chemical Foaming Geopolymer Building Materials Research on Absorbing Property of Cement-Based Material Blending with Nano-TiO2 and Steel Fibers Research on Absorbing Property of Three Kinds of Cement-Based Material Blending Compositions Increasing Tool Life by AlCrTiSiN Film Study of Oil Displacement Performance of Hydroxyl Sulfobetaine Surfactant Long Term Monitoring of Performance Characteristics of the Pavement Test Track Chapter 3: Biochemistry Materials and Engineering Efficacy Comparison of On-Site Preparation of 5%Lidocaine Niosome Dispersion and Benzocaine/Tetracaine Gel Tripod-Like -NaYF4: Ln3+ (Ln = Yb, Er, Tm, Ho) Nanocrystals with Multicolor Upconversion Luminescence Culture Conditions of a Mycorrhizal Fungus and its Post-Inoculation Microbial Effect Studies on Lignocellulose Degradation by Rumen Microorganism New-Type Biosensor Based on Multiple Total-Internal Reflections in Heterodyne Interferometry Heat Treated and As-Plated Electroless Duplex Ni-P/Ni-B Coatings: Evaluation of Hardness and Wear Resistance Development of Novel Bio-Degradable Electrolyte Based on Polylactide (PLA) for Lithium Rechargeable Battery Improvement of Acid Clay Using Calcium-Rich By-Product Recovered from Petroleum De-Sulfur Operation Ecotoxicity of Nanomaterials on the Basis of Clay Minerals Chapter 4: Energy Science and Environmental Engineering Design and Test of a Lab-Scale Vanadium Redox Flow Battery Cell Considering Electrolyte Feeding Structure for Solar Energy Solid-State Dye-Sensitized Solar Cells Using Mesoporous TiO2 Films Fabricated with Amphiphilic Rubbery Random Copolymer Research on Anti-Interference of Measurement-Control Device in Substation Automation System Stand-Alone Photovoltaic Based on In-Phase Voltage Injection for Electroplating Industry Factory Performance of Bi-Facial PV Modules in Urban Settlements in Tropical Regions Thermo-Hydraulic Performance Evaluation of Inclined Vortex Generators Garbage Incineration and Intelligent Fusion Strategy of Secondary Pollution Control Parameters Influencing the Utilization of Composts for Energy Production The Composition of Humic Acids Separated from Compost Prepared from Biologically Degradable Waste Silicon Nanowires Based Solar Cell Using Native Oxide and Silicon Nitride Bi-Layer Passivation On Optimal Functioning of the Aeolian Electro-Power Systems Upon Power Loses due to Current Harmonics in a Fotovoltaic System, Opperating at Maximum Power Point Dump Load Shedding and Slope Angle of Optimization Design Water Status and Prospects for Remote Sensing Housing Development, Energy Consumption and Energy Prices Noise Source in Automobile and Control Method for Environmental Protection Numerical Simulation on Flow Field inside the Drainage Valve of the Natural Gas Pipeline Improved Variety Populus AlbaxPopulus Bolleana and its Parents Growth Characteristic Study on the Charging Characteristics of Lithium-Ion Batteries for Electric Vehicles Regenerative Braking Theoretical Calculation of the Detonation Parameters of Nitropyrazoles Explosives Chapter 5: Manufacturing Science and Engineering Effective Use of CA System for Control of Water-Jet Cutting Technology Calculation of the Size of the Sand Resistance Machine Simulation of Generated Heat by Friction of Explosion-Proof Elevator Ropes Numerical Simulation and Analysis of Thermal Energy Generated by Friction on Explosion-Proof Elevator Control of Hybrid Stepping Motor Drive Using Computational Verb PID Controllers The Design of the Footrest for the Auto Seat Based on Theergonomics Discussion the Re-Use Precision Locknut of the Machine Tools Spindle in the Vertical Assembly Characteristics Friction Characteristics of Clasp Locked Precision Locknuts under Different Conditions Effects of Parameters on Flutter of a Wing with an External Store Effect of Tool Shape on Galling Behavior in Plate Shearing A Combined Physiotherapy Ultrasound and Electrical Shock Device (COMPO) Design Interactive Body Balance System (IBAS) Design Structures Analysis and Optimum Design of the Large Stroke Two-Axis Fast Tool Servo Study of Spindle Current Signals for Tool Breakage Detection in Milling Interference-Fit Joining of Aluminium Tubes by Electromagnetic Forming The Discussion of Rotor Guide Channel Length of Vertical Shaft Impact Crushing Test Machine Research on the Core Method of Lean Construction Management Mode and its Implementation A Study on the Applicability of Direct Evaporative Cooling Air Conditioner Used in Lanzhou The Research of the Plane Receiving Array in Offset Parabolic Reflector Antenna with Multi-Beam at Millimeter-Wave Band Production Capacity Allocation for Multi-Generational Products Based on Decision Tree Method An Improved Design Method for Automotive Powertrain Rubber Mounts Computational and Mathematical Modelling during Calculation of Margin of Safety as the Way of Decrease in Expenses of Energy during the Operation of Combined Designs Development of Temperature Control System of Multi-Function and All-Electric Rheometer Size Design of Capillary and Barrel of Multi-Function and All-Electric Rheometer A Convenient Method for Calculating Internal Force of Rod for Tower Crane Analysis of China PV Application Market Development Support Policy Based on NPV Model Analysis on Kinematic of Rod on Rotor with Sine Curve Revolving Speed in Twin-Rotor Cylinder-Embedded Piston Engine Vibration Fatigue Analysis of the Structure under Thermal Loading Research of a New Theoretical Model of Innovative Design Methodology A New Approach to Characterize Moisture Management Properties of Diaper Numerical Simulation of Aerodynamic Performance of Film Cooling on a Flat Plate with Surface Roughness Analysis on Induced Stress Field by Pore Pressure Change of Sandstone Reservoir The Theoretical and Experimental Research on Accelerated Life Test of Collapsible Fabric Tank Storage Life Based on Reliability Analysis on Avoid Incision in Underground Engineering Reinforcement Technique against Cutting Resistance Applying Support Vector Machines in Rebound Hammer Test Effect of Blank Shape and Size on the Forming Quality of Thread Shaft Rolling in Cross Wedge Rolling Chapter 6: Mechatronics and Microelectronics Design and Realization of Robot Workplaces with Virtual and Augmented Reality Application Algorithms for Dynamic Hardness Measurements by Scratch Testing in the Submicron and Nanometer Scale Design of Automatic Scraping System The Spectral Element Method for the Steklov Eigenvalue Problem Linear Matrix Inequality and its Application in Control Theory Study of Fault Arc Protection Based on UV Pulse Method in High Voltage Switchgear Intelligent Aquaculture Monitoring System Based on Fieldbus A Survey on Randomized Sampling-Based Path Optimization Methods Chapter 7: Computer and Internet Application Three-Dimensinal Structure Modeling of Lishui Depression, East China Sea Basin A Review on the Bin Packing Capacitated Vehicle Routing Problem A Novel Model for Multi-Parametric Load Balance in Grid Computing Research on Piano Music Signal Recognition Based on Short-Time Fourier Analysis Application of Operator Libraries on Laminate Strength Optimization of Composites Virtual Learning Technology and Materials in Malaysian Higher Education

「Nielsen BookData」 より

• NII書誌ID(NCID): BB15579642
• ISBN:
  • 9783037859551
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: xiv, 708 p.
• 大きさ: 24 cm
• 件名:
  • LCSH : Materials -- Congresses
• 親書誌ID:
  • BA24926058