Applied mechanics and materials II : selected, peer reviewed papers from the 2013 International Conference on Applied Mechanics and Materials (ICAMM 2013), November 23-24, 2013, Zhuhai, China
著者
書誌事項
Applied mechanics and materials II : selected, peer reviewed papers from the 2013 International Conference on Applied Mechanics and Materials (ICAMM 2013), November 23-24, 2013, Zhuhai, China
（Applied mechanics and materials, v. 477-478）
Trans Tech Publications, c2014
- : [set]
- Part 1
- Part 2
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
"The 2013 2nd International Conference on Applied Mechanics and Materials, ICAMM2013, was held in Zhuhai, China from November 23 to November 24, 2013."--Pref.
Includes bibliographical references and indexes
内容説明・目次
内容説明
Collection of selected, peer reviewed papers from the 2013 International Conference on Applied Mechanics and Materials (ICAMM 2013), November 23-24, 2013, Zhuhai, China.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 302 papers are grouped as follows:
Chapter 1: Damage and Fracture Mechanics;
Chapter 2: Fatigue and Creep;
Chapter 3: Dynamics, Vibration and Structural Stability;
Chapter 4: Solid Mechanics Theory and Methods and Engineering Application;
Chapter 5: Fluid Mechanics and Fluid Engineering;
Chapter 6: Computational Mechanics;
Chapter 7: Biomechanics and Sports Mechanics;
Chapter 8: Research and Design in Mechanical Engineering and Manufacturing;
Chapter 9: Geotechnical Engineering;
Chapter 10: Structural Engineering;
Chapter 11: Hydrology and Hydraulic Engineering;
Chapter 12: Construction Materials;
Chapter 13: Seismic Engineering;
Chapter 14: Architectural Design and Theory;
Chapter 15: Composites and Polymers;
Chapter 16: Micro / Nano Materials;
Chapter 17: Metal and Alloys;
Chapter 18: Biomaterials and Biotechnology;
Chapter 19: Materials Processing Technology and Chemical Engineering;
Chapter 20: Information Technologies and Computational Algorithms;
Chapter 21: Engineering Management
目次
Preface and Conference Organization
Chapter 1: Damage and Fracture Mechanics
Influence of the Cross Section Shape on Energy Absorbing Component of Bumper Subjected to Low Speed Crash
Optimization of Sonic Boom Suppression by Off-Body Energy Deposition
Evaluation of Stress Corrosion Resistance Properties of 15CrMoR(H) in H2S Environment
Analysis of Plastic Strain between Substrate and Micro-Cantilever under Different Deformation Characteristics
Evaluation of the Higher Order Terms of the Wedge-Splitting Specimen Based on the SBFEM
Study on Failure Mechanisms of Composite Materials Based on HHT
The Research on Oblique Crack Tip Deformation Field of Airship Envelope Composites Based on the Digital Speckle Correlation Method
Numerical and Experimental Buckling and Post - Buckling Analysis of Composite Cylindrical Panel with Delamination
Chapter 2: Fatigue and Creep
Finite Element Analysis of Input Axis in Six-Speed Transmission
Design of Flat Ends in Pressure Boilers with Circular and Elliptical Stress Relieve Grooves
Analytical Estimation of Maximal Fatigue Loads in Cylindrical Roller Bearings
Analysis on Stress and Contact Failure of BNC Connector Components
Qualitative Calculation of Fatigue Life for Turbine Rotor Blade
Chapter 3: Dynamics, Vibration and Structural Stability
Modal Stability Control of a Wheeled Heavy Machine
Initial Temperature Influence to the Rectangular Plates Free Vibrations under Different Types of Boundary Conditions
Research on Analytic Calculation Method of the Dynamic Response of Buried Pipelines under Indirect Ground Shock
Dynamic Experimental Investigation on the Fundamental Frequency of Liquid Storage Tanks under Seismic Excitations
Design Principles of Controlling Vehicle Gear Whine Noise Based on Loudness Metric
Dynamics of Turbocharger Rotor with Spin Softening Effect
Study of Contact Interface Rough Effect on Vibration Stress Wave Propagation
Performance Analysis and Improvement Design of School Bus Seat Based on Workbench
Sensing of Driving Conditions Based on Vibration Signal
A Novel Structural Form of Semi-Submersible Platform for a Floating Offshore Wind Turbine with Hydrodynamic Performance Analysis
Effects of Wind Load on Hydrodynamic Performance of an Offshore Wind Turbine Semi-Submersible Platform
Tendon Response of 10 MW Offshore Wind Turbine TLP Platform in Extreme Environment Condition
Oscillation Suppression in a Delay-Coupled Flexible-Joint System
Development of an Novel Adaptive Suspension System Based on Ball-Screw Mechanism
Stable Platform Based on Workbench Vehicle Structure Analysis
Chapter 4: Solid Mechanics Theory and Methods and Engineering Application
A Method for Calculating the Amount of the Deflection and Force-Energy Parameters for Copper-Clad Steel Tube in the Process of Straightening
The Sinusoidal Buckling Mechanical Analysis for the Coiled Tubing Based on Energy Method
The SVC Based AFOSM Method for the Structure Reliability Sensitivity Analysis
Research on Hexahedral and Tetrahedral Mesh Applied to Strength Analysis of Bogie Frame
Research on Geometry Model and Stress State Leading-In through Heavy Rail Cooling to Compound Straightening
Dynamic Response Analysis of Square Honeycomb Sandwich Plates Subjected to Blast Loading
Investigation into Dynamic Postbuckling of Thin Rectangular Plate under Elastic Compression Wave
Chapter 5: Fluid Mechanics and Fluid Engineering
Study on Flow Rate and Steady Flow Force of Hydraulic Combination Valve Based on CFD
Research on Effects of Positioning Ways on the Strength of Port Plate in Axial Piston Motor
Investigation of the Predictive Ability of Two Advection Schemes on the Formation of a Turbulent Separation Bubble in a Boundary Layer Wind Tunnel
The Numerical Simulation and Calculation of Aircraft Horizontal Stabilizer to Aerodynamic Forces by Using Visual Method
The Simplified Flow Field Analysis Method of Multi-Layers Parallel Plates Perfusion Bioreactor
Study on the Blood Flow with Rolling Manipulation of Traditional Chinese Massage
Investigation of CFD Method Simulating Hydrodynamic Performance of AUV with Complicated Shape
Direct Solution of Three-Dimensional Turbulent Rayleigh-Be nard Convection
Study on the Characteristics of the Flow Resistance of the Mixed Plate Heat Exchanger
Influences of the Compliances and the Resistance on Pulsatile Flow Waveforms
Flow Field Numerical Simulation Analysis of Five Wing Horizontal Wave Turbine Power Plant with Different Blade Angles
Simulation Study of Three-Phase Flow Field Based on Microbubble Flotation
Numerical Simulation of the Effect of the Uneven Wall on the Liquid Film Flow
Computational Fluid Dynamic of Date Transfer
Supersonic Bi-Directional Flying Wing Wave Drag Optimization Based on Alternative Form of CST Method
New Exact Solutions for Stokes First Problem of a Generalized Jeffreys Fluid in a Porous Half Space
An Analytical Solution of Wave Exciting Loads on CALM Buoy with Skirt
Understanding Regular Waves Effect on Ship by Numerical Wave Tank Simulation
Suppression of Vortex Shedding of Circular Cylinder by a Small Control Rod
Numerical Simulation of Magnetostriction-Induced Cavitation Flow
A Method for Aerodynamic Characteristic Analysis of Hypersonic Aircraft Based on Response Surface Model
An Immersed Boundary Method for Compressible Flows with Complex Boundaries
A Numerical Investigation on Hydrodynamics of Multiple Floating Bodies in Offshore Installation Engineering
Chapter 6: Computational Mechanics
Computational Technique of the Sliding Interface in Numerical Simulations of 3D Penetration
The Energy Relaxation Method for the Verification of Finite Element Analysis
Mechanical Analysis and Strength Evaluation of KEY COMPONENTS Tripod of SNUBBING UNIT
Nonlinear Calculating Method for Multi-Bar Luffing System of Giant Crane Considering the Sagging Effect
The Mathematical Model of Crane Hoisting Mechanism
Dynamic Characteristics Analysis and Modeling of Giant Magnetostrictive Actuator Turning System
Cross-Deck Slamming Load Calculation of Trimaran Based on Modified Plate Slamming Theory
Simulation of Red Particles in Blood Cell
Chapter 7: Biomechanics and Sports Mechanics
A Study on Strength and Training Characteristics of Elite Female Skaters
The Fitness Characteristics of Elite Female Skaters and Regression Analysis
Research on Body Pressure Distribution at Different Angles of Wheelchair Seat Surface
Chapter 8: Research and Design in Mechanical Engineering and Manufacturing
Study on Structure Analysis and Control of the Underwater LED Lamp Capable of Changing Brightness
Affect the Comfort of Pants Crotch Curve Analysis of the Factors
Concept of the Partial Throw-Away Design of Piezoelectric Micropump for Medical Uses with Low Cost and Waste
Monopole-Gear Design Based on Neural Network and Modified Particle Swarm Optimization
The Influences of New Paper Surface Efficiency on Printing Quality
RCS Calculation of Tank Turrets and their Improved Stealth Shapes
Kinematics Analysis of Morse CVT Input Mechanism
Development of a Self-Balancing Cooling System Based on Harvesting Heat via Stirling Engine
Small Refrigerator Simulation and Experimental Study
Solar-Powered Wireless Sensor Network's Energy Gathering Technology
Research on the Application of Green Air Conditioning in the Granary
Performance Comparison for Different Material Quantum Dot Single Intermediate Band Solar Cells
A Method for the Assessment of the Inhalation Dose Exposure to Radionuclides in an Indoor Environment
Chapter 9: Geotechnical Engineering
Simulation of Primary Fracture Propagation around Compressive Cavity with the Extended Finite Element Method
Study on Protection Measures of Highway Cutting Soil Slope in Seasonal Frozen Regions
Research on Stability of the Rock-Socketed Piles in a Landslide Control Project
Reliability of GDS-RCA Resonant Column on Routine Experimentation
Study on Test and Practical Application of Solidification Treatment of Wasted Mud
Characters Analysis of the Retaining Structure of the Foundation Pit under Local Load
Approximate Analytical Method of Load-Settlement Relation for Composite Foundation with Lateral Restriction
A Method to Determine Pre-Consolidation Pressure of Soft Soil in Dongting Lake Area
Laboratory Test Method for Dynamic Rebound Modulus of Subgrade Red Clay in Moist-Heat Area
Experimental Study of Influence Factors in Unsaturated Soil Infiltration Rate
Experimental Study on Influence of Seasonally Frozen Ground on Horizontal Frost-Heave Force of Frozen Wall
Effect of Different Organic Matter Content on Soil Moisture Dynamics
Meso-Mechanical Simulation of Fracture Grouting under Fluid-Solid Coupling Environment and Engineering Applications
Study on Grouting Heave for Pipeline Underground in Urban Tunnel Engineering
Further Debate about Visual Design Methods for Pile Foundation
Application of Axial Force Compensation for Steel Support System in Practical Project
Experimental Study on O-Cell Test of Long Rock Socket Bored Pile
Research on Stability Analysis of Soil Slope in Consideration of Creep Property
Geotechnical Engineering Anti-Leakage in Unstable Mountain
The Grouting Diffusion Model of Power-Law Fluid in Single Fracture
Hydro-Mechanical Coupled Analysis of the Variable Permeability Coefficient of Fractured Rock Mass
Analysis on Railway Ballast-Glue Micro-Characteristics
FBG Sensor Application for GFRP Soil Nailing Pull-Out Test
Simulation and Optimization on GFRP Soil Nailing Support
Comparative Analysis on Stress-Strain Characteristics for Cement Stabilized Macadam Base in Different Layer Contact Conditions
Comprehensive Prediction of Rockburst in High-Speed Railway Tunnel
Nonlinear Dynamic Analysis of Macroscopic Fracture of Limestone in General Experiments
Numerical Simulation on Soil Pressure Distribution Characteristics of Gravity Retaining Wall
Comparative Analysis on Different Types of Anchor Reinforcing Gravity Retaining Wall
The Research on Applied of Cement-Soil Mixing Method Reinforcing Shallow Soft-Soil Foundation in Yinchuan Distric
Numerical Simulation of the Effect of Joint Orientation on the Failure Strength of Rock
Analysis of Individual Contribution of Two Compression Waves in Vertical Vibration of Water-Saturated Soils
Experimental Study on Creep of Highly-Weathered Breccia
Dynamic Stability Analysis of Defective Piles under Vertical Harmonic Load
Numerical Simulation on the Stress Characteristics of Prestressed Retaining Wall
The Effect of Hole behind Lining on Safety of Tunnel
A Mathematical Model for Subgrade Soil Water-Vapor Migration
Transformation of the Triaxial Seepage Device for Measuring Deformation of Coal Containing Gas
Physical and Chemical Characteristics of High Clay Content Dredger Fill in Different Regions
Acoustic Emission (AE) Propagation Attenuation Theory and Rule in Non-Perfect Elastic Coal and Rock
Experimental Study of C Band Passive Microwave Remote Sensing of Soil Moisture
Chapter 10: Structural Engineering
The Local Stress Analysis for the Anchorage Zone of Tooth Plate in Steel Box Girder
Analysis on Vertical Swivel Construction of Cable-Stayed Bridge with Steel Arch Pylon
Redistribution of Internal Force under Structural Defect and Non-Linear Spatial Stability under Live Load and Wind of Tied-Arch Bridge
The Adhesion Experimental Study on the PESB
Based on ANSYS Buckling-Restrained Brace Frame Structure Shock Absorption Analysis
Research on Performance of Precast Two-Way Hollow Slab Shear Wall with Cast-In Situ Boundary Elements
Theoretical and Experimental Research on Joint Slippage Effects of Lattice Angle Steel Tower
A Iterative Computation Method for Main Cable Shape Calculation of Self-Anchored Suspension Bridge
Storey-Adding and Strengthening Design for A Reinforced Concrete Frame Structure
Jacking Technology for a Simply Supported Girder Bridge
Research on CFRP Strengthening Corroded Reinforced Concrete Columns in Seismic Performance
Design Method of Shear Resistance of Hybrid Fiber Reinforced High Performance Concrete Deep Beams
An Incremental Method for Cable Force Tuning of the Concrete Cable-Stayed Bridge Considering Cable-Girder Temperature Difference Effect
Pull-Out Tests of Deformed Bars from Ferrous Mill Tailing Concrete
Numerical Study on the Influence of Sleeve-Rib Space on the Static Response of Grouting-Sleeve Reinforcement-Connection Component
Analysis of the Impact Effect of the Suspender System in a Half-Through Concrete Filled Steel Tubular Arch Bridge
The Ultimate Bearing Capacity Analysis of RC Beams Strengthened by Externally Bonded and Anchored I-Section Steel
Analysis on Fire-Resistance Performance of Slabs Strengthened by Carbon Fiber Sheet Bonded with Inorganic Adhesive
Numerical Analysis for Geometry Nonlinear Characters of Laminated Box Beam Columns
Structural Optimization Design Considering Reliability Constraints
Comfortable Evaluation of Bridge-Station Combined Large Span High Speed Railway Station under High Speed Train Load
Modal Parameters Identification of Civil Engineering Structures Based on the Random Decrement Technique
Structural Modal Parameter Identification Based on ARMA Model
Flexural Behavior of CFRP Strengthened Reinforced Concrete Beams
Application of Modified Consistent Mode Imperfection Method in Stability Analysis of Single-Layer Reticulated Shells
Study on the New Energy-Saving Structure System with Seismic Performance
Model Test for Hydrodynamic Parameters of Immersed Tube Tunnel in Static Water
Study on Truss Structure Damage Identification Base on Residual Force Vector
Research of Rigid Pavement on Structure Combination of HMA Overlays
Chapter 10: Structural Engineering
Interfacial Shear Stresses Calculation of RC Beams Strengthened with FRP Plate under Symmetry Concentrated Loading
FEM Analysis of Impact Tests for Steel Plate Concrete Panels against Scaled-Aircraft Impact
Seismic Performance Analysis under Different Conditions of Location for Shear Wall Frame Shear Structure
Stochastic Imperfection Mode Superposition Method for Stability Analysis of Lattice Domes
Investigation on Wind Tunnel Blockage Effects of High-Rise Building
Research on the Wind Tunnel Force Balance Tests of Long-Span Closed Coal Trestle
The Design of Blasting Demolition of the Reinforced Concrete Chimney Based on Complicated Conditions
Stochastic Analysis to Truss Spar Platform in Deep Sea
Test Installation of a Marker-Based Framework for Structural Health Monitoring of Bridges
Aerodynamic Testing of Bridge Structures
Chapter 11: Hydrology and Hydraulic Engineering
A Hydropower Station Energy Dissipation Shape Optimization Test
A Study of Suspended Sediment Transport Characteristics in the Offshore of Yangtze Estuary
The Evaluation Model of Fuzzy Analytic Hierarchy Process in Water Project of Xiasha District Based on Entroy Weight
Research on Automatic Safety Monitoring System for Artificial Islands
The Application Study of Non-Linear Dynamic Contact Model of Arch Dam with Contraction Joints
Two-Dimensional Shear Stress on Bonding Interface of FRP Plate Reinforced Hydraulic Concrete
Research on Relation among Inlet/Outlet Pressure, Pressure Loss and Inlet Velocity of a Complex Resistance Muffler
The Impacts of Water Transfer on Thermal Structure of Shallow Reservoir
The Application of Entropy Weight of Attribute Recognition Model in Reservoir Eutrophication Evaluation
The Classification and Analysis of Risk Response Measures in the Hydraulic Engineering Slope
Prediction and Optimization of Groundwater Development in Beijing Plain
Studies on Coupled Model of Seepage Field and Temperature Field and Stress Field
Multiple Stepwise Regression Analysis Crack Open Degree Data in Gravity Dam
Chapter 12: Construction Materials
Microstructure Analysis of the Influence of Composite Polymers on Concrete Mechanical Performance
Applied Research on Foamed Asphalt Cold-Regenerating Technique in Overhaul Engineering of Binshi Expressway
The Flowability and Adsorption of Low Sulfate Cement with Superplasticizers
Hydration Kinetics and Microscopic Analysis of Calcium Oxide Expansion Clinker
An Innovative Admixture to Enhance the Fresh Properties of Slag Pastes
Bond Properties of Ceramic Concrete Reinforced by Bamboo Bar
The Properties of High-Strength Concrete Containing Super-Fine Fly Ash and Limestone Powder
Several Common Retarders on Performance of Ultra-Early-Strength Grouting Material
Early Strength Agent on the Properties of Reinforcement Materials Research
The Influence of Super-Fine Steel Slag on the Properties of High-Strength Concrete
Research on Secondary Cooling Technology for Billet of HRB500E Vanadium-Containing Steel Rebar
Study on Hybrid Fiber Reinforced Lightweight Aggregate Concrete
Study on Rubber Particles Modified Concrete
Application of Diatomite Modified Asphalt
Laboratory Research on Aging Properties of Recycled SBS Modified Asphalt
Simulation of Numerical Test of Concrete Microscopic Structure by Second-Order Manifold Method
Experimental Research on Fireproofing Measure of Beams Strengthened by Carbon Fiber Sheet Bonded with Inorganic Adhesive
Optical and Micro-Mechanical Properties of Ag-Based Low-E Glass by Magnetron Sputtering
Thermal Performance Study of Core Board of Metal Sandwich Thermal Insulation Board on Ecotect
Research on Finite Element Model for Parallel to Bamboo Culms Axial Shear
Research on Multivariate Composite Super early Strength Grouting Materials
Research on the Compound early Strength Agent to the Performance of Super High early Strength Grouting Material
Research on Damage Characteristics about Reinforced Concrete Circular Pipe Culvert
Electro-Migration Corrosion Inhibitors for Chlorides Induced Corrosion in Reinforced Concrete
Mesoscopic Numerical Simulation of Temperature Crack with Non-Uniform Temperature Distribution in Concrete
Numerical Simulation on PPFRC with Different Contents
Chapter 13: Seismic Engineering
Seismic Performance Evaluation of Large Span Cable-Stayed Bridges
Large-Span Cable-Stayed Bridge Seismic Response Analysis Considering Traveling Wave Effect
Seismic Damage of Suspended System in Lushan Earthquake
Research Status for Nonstructural Components under Severe Earthquake
Research of Random Seismic Response of Large-Span Multi-Tower Cable-Stayed Bridge
Verification of Seismic Safety Evaluation Program LSSRLI-1 Using Exact Solution
Difference between Two Seismic Response Analysis Programs for Soft Site
Evaluation of N-M Model on Simulating Seismic Response of High-Rise SRC Structure
The Influence of Stress Drop on Synthesized Ground Motion
The Stability of Ground Motions Randomly Synthesized for an Engineering Site
Research on Static Stress Triggering and Seismicity in Minxian and Adjacent Area, Gansu
The Amplification Effect of Soft Site Based on Records from Borehole Arrays
Application of Post-Stack Seismic Inversion in Discription of the Reservoir Distribution
Numerical Simulation Analysis on Seismic Behavior of Tow-Story Websteel
Numerical Analysis on Seismic Behavior of RC Frame with Different In-Filled Panels
Research on Material Damage Limits of RC Components for Performance-Based Seismic Design and Assessment
Examination of CPT-Based Liquefaction Evaluation Methods for New Zealand Earthquake
Research on Regional Dividing Technology for Liquefaction Based on ArcGIS
Chapter 14: Architectural Design and Theory
Research of the Economical Campus Construction in Hangzhou
Protection of the Sichuan Earthquake Ruins Landscape Resources
Study on Disaster Prevention Index System and Evaluation Method of Large Commercial Building
Study on Architectural Design for Indoor Space of Small Area House
Analysis on the Space Characteristics of Shanxi Private Gardens in Ming and Qing Dynasties
The Influence of Social Class in Human Settlements - Take Yen Hsi-Shan's Former Residence and Zhang Jiata Villages as an Example
Museum Exhibition Space Analysis Based on Tracing Behavior Observation
Study of Traditional Architectural Form Adapt to the Mountain Environment Research - Zhang Jiata Ancient Village in Fangshan County of Shanxi
Analysis of Shanxi Traditional Local-Style Dwellings
Brief Analysis of Settlement Patterns in Taiyuan County in Ming Dynasty
Chapter 15: Composites and Polymers
Analysis of In-Plane Equivalent Elastic Modulus of Aluminum Honeycomb Cores Based on Finite Element Method
The Influence of Reactive Diluents on the Properties of UV Dual Cured Polyurethane-Modified Epoxy Monoacrylates Films
Applied Research of the Modifying Agent of Rubber Plastic Composite (MaR) in Asphalt Mixture
Study on the Thermodynamics and Dynamics of In Situ Ni-Al/Al Reinforced Aluminum Matrix Composite
Preparation and Property of Waterborne Polyurethane Waterproofing Composites
Polymerization and Chiroptical Behavior of N-[o-(4-isopropyl-4,5-dihydro-1,3-oxazol-2-yl) phenyl] Methacrylamide
Preparation of a Net with the Function of Sand-Resistance and Sand-Fixation
Cross-Linked Alternately Copolymerized Electrolyte Poly (styrene-a-maleic ester) Synthesized through Solvent-Free Strategy
Corrugated Board Flute-Shaped Finite Element Analysis and Optimization
Preparation and Anti-Corrosion Performance of Conductive Copolymer (aniline-co-pyrrole)/TiO2 Composite
Mechanism of Micro-Void Initiation in Composite Materials during VaRTM Process According to the Pressure and Thickness of the Impurity
Chapter 16: Micro / Nano Materials
Non-Linear Modeling of Single-Walled Carbon Nanotubes
Production and Properties of Mononuclear Microcapsules Encapsulating Cinnamon Oil by Complex Coacervation
Influence of Free Volume on Residual Solvents of SiO2 Modified Polypropylene Films
Preparation of the Al2O3/3Y-TZP Ceramics by Microwave Sintering under Low Temperature
Direct Growth of Graphene on SiO2 by Using Ga-Ni Flux
Synthesis of Monodispersed Lauric Acid Capped Silver Nanoparticles by Wet-Chemical Reduction Method
Chapter 17: Metal and Alloys
Investigation of Structure and Performance of SAE4330 Steel
Crystallization Kinetics Analysis and SPS Consolidation of Mechanical Alloyed Fe79Ti16P5 Amorphous Powders
Assessment of Fatigue Life of Ni-Ti Samples Prepared by Different Techniques
Study on the Dynamic Recrystallization Critical Stress of AZ91 Magnesium Alloy
Influence of P2O5 and Al2O3 on Mineral Formation in Converter Slag
Influence of Ti to the Microstructure and Mechanical Properties of Al-12Si-3.2Cu-1Mg-2.4Ni Piston Alloy
Fatigue Characteristic of Aluminum Alloy Plates with Different Thickness
Study on the Microstructure and Properties of Low Cost TiFeAl Alloy
Research on Grain Refinement Effect of Al-5Ti-C Alloy on Pure Aluminum and its Attenuation Mechanism
The Effect of Initial Microstructure on the Dynamic Mechanical Behavior of Titanium Plate at Different Strain Rates
Pressure-Induced Tunable Magnetism and Half-Metallic Stability in Co2FeGa Heusler Alloy
Influence of Extrusion Ratio on Microstructures and Properties of Cu-17Ni-3Al-X Alloy
Effect of Cooling Velocity and Casting Temperature on Solidification Microstructure of Pure Al Refinement under Al-5Ti-B Alloy
The Study on Properties of Soluble Alumina Based Ceramic Cores
Chapter 18: Biomaterials and Biotechnology
The Adsorption Isotherm Studies of Orange Peel on Pesticide Furadan
Morphology and Performance Analysis of Alpaca and Cashmere Fiber
Heterogeneous Method for Grafting of Syringaldehyde onto Chitosan by Laccase Oxidation
Distribution Characteristics of Heavy Metals in EPS and Cells
Effect of Different Winemaking Technologies on Quality in Cabernet Sauvignon Red Wines
Effect of Multiple Gas Media Package on Preservation of Fresh Sweet Corn at Room Temperature
Development of the Reliable Fluorometric Assay for the Sensitive Determination of Nitric Oxide Metabolites in Biological Fluids
Chapter 19: Materials Processing Technology and Chemical Engineering
Accelerated Seeded Precipitation Pre-Treatment for the Improvement of Reverse Osmosis Membrane
Study on Metal Transfer and Welding Spatter Characteristics of Basic Flux Cored Wire
Influence of Plasma Treatment on Size Adhesion Strength to Raw Cotton Yarns
Linear Rock Cutting with SMART*CUT Picks
Study on the Abrasive Wear of Ceramic Piston Rings and the Different Cylinder Bore
Study on Welding Deformation of 304 Stainless Steel Plate with Different Thickness
Coating of Fe-Mn-Si Shape Memory Materials on AISI 304 Stainless Steel by Laser Cladding Method
Effect of Annealing on Properties of the TiN & TiAlN Coatings Deposited on Powder Metallurgy High Speed Steel ( S790 )
A Novel Method for Preparing Biomimetic Oleophobic Surface on X70 Pipeline Steel
Preliminary Study on Temperature Field of a Cylinder Circumferential Surface under Laser Spiral Scanning Quenching
Copper from Copper Smelting Slag by Oxidation Leaching
Numerical Research on Implosion of Condensed Liners Used in Study of Shock Adiabat of Materials
Preparation of Ceria from Bastnaesite with NaHCO3 as Fluoride Retention Additive
Experiment on the Performance of Filtration by Ceramic Media
The U-Bending Forming of Aluminum Foam Sandwich Panels
Study on the Preparation of Rich Hydrocarbon Bio-Diesel from Cornus wilsoniana Vegetable Oil with High Temperature Catalytic Cracking
Catalytic Cracking of Cornus wisoniana Oil to Liquid Bio-Fuel Oil Using KF/CaO as a Solid Base Catalyst
Measurement and Correlation for Solubilities of 2,4-D Acid in Ethanol-Water
Study on the Catalyst Performance on Cornus wisoniana Oil Catalytic Cracking Prepared Biological Fuel Oil
Composition - Property Relationships of Magnetic Inks for Screen Printing
Catalytic Gasification of Lignin in Supercritical Water
Microwave-Assisted Secondary Synthesis of NaA Zeolite Membranes Grown on ZrO2 Substrate
Chapter 20: Information Technologies and Computational Algorithms
Study on Cloud Data Destruction Mechanism and its Application
Study on Collaborative Learning System Design Based on Web Platform
Preparation of Target CETP in Docking-Based Virtual Screening
Existence of Anti-Periodic Solution for Delayed Cellular Neural Networks with Impulsive Effects
A Windowed Range Migration Imaging Algorithm for Ground Penetrating Radar Applications
An Improved Iteration Back Projection Imaging Technique for Surface Penetrating Radar Applications
Chapter 21: Engineering Management
Multi-Level Automotive Service Performance Evaluation Model
Research on Cost Risk Identification of Metallurgical EPC Project
Manufacturing Industry Structure and Export-Import Development of Chinese (2007-2012)
Eco-Criticism and Urban Ecological Civilization
Development Trend of Food Packaging Materials
The Optimization of Slotting Based on the Power Drive-Through Rack
A Case Study of English Language Learning Strategies for University Students of Engineering Design Specialty
「Nielsen BookData」 より
