Energy development : selected, peer reviewed papers from the 3[rd] International Conference on Energy, Environment and Sustainable Development (EESD 2013), November 12-13, 2013, Shanghai, China
著者
書誌事項
Energy development : selected, peer reviewed papers from the 3[rd] International Conference on Energy, Environment and Sustainable Development (EESD 2013), November 12-13, 2013, Shanghai, China
（Advanced materials research, v. 860-863）
Trans Tech Publications, c2014
- : [set]
- Part 1
- Part 2
- Part 3
- Part 4
大学図書館所蔵 全1件
-
Part 1A25118/860-1400067074,
Part 2A25118/860-2400067082, Part 3A25118/860-3400067090, Part 4A25118/860-4400067104
注記
[rd]: superscript
Includes bibliographical references and indexes
内容説明・目次
内容説明
Collection of selected, peer reviewed papers from the 3rd International Conference on Energy, Environment and Sustainable Development (EESD 2013), November 12-12, 2013, Shanghai, China.
The 596 papers are grouped as follows:
Chapter 1: Development and Utilization of Solar Energy;
Chapter 2: Development and Utilization of Wind Energy;
Chapter 3: Development and Utilization of Biomass Energy;
Chapter 4: Energy Storage Technology;
Chapter 5: nergy onsumption and Energy-Saving Technology;
Chapter 6: Hydrogen and Fuel Cell;
Chapter 7: Energy Materials;
Chapter 8: Energy Chemical Engineering;
Chapter 9: New Energy Vehicles and Electric Vehicles;
Chapter 10: Green Building Materials and Energy-saving Buildings;
Chapter 11: Engineering Thermophysics;
Chapter 12: Thermal Engineering;
Chapter 13: Fluid Engineering and Machinery;
Chapter 14: HVAC, Air Conditioning and Refrigeration;
Chapter 15: Power Machinery and Engineering:
Chapter 16: Power System and Automation;
Chapter 17: High Voltage and Insulation Technology;
Chapter 18: Motor and Electric Equipment;
Chapter 19: Electrical Theory and New Technology;
Chapter 20: Power Electronics and Power Drives;
Chapter 21: Smart Grid Technologies;
Chapter 22: Power System Management;
Chapter 23: Product Design and Manufacturing Automation;
Chapter 24: Precision Automation;
Chapter 25: Application of Computer and Information Technology in Industry;
Chapter 26: Engineering Education;
Chapter 27: Project Management and Engineering Management
目次
Preface and Conference Organization
Chapter 1: Development and Utilization of Solar Energy
Study on Optimum Installation Angle of Photovoltaic Module Considering Sunlight Reflection
A Comprehensive MPPT Algorithm of the Solar Batteries Energy-Saving Control System
The Study on a Simplified Model of Photovoltaic Power System
Experimental Study on Direct Coupling in a Photovoltaic-Electrolyte Hydrogen Generation System
Techno Economic Evaluation of Biogas Integrated Parabolic Trough Solar Energy Combined Cycle
Design of Linear Fresnel Lens for Concentrated Photovoltaic System
Impacts Assessment of a Solar Energy Project under the Perspective of Sustainable Livelihood with Wenhai Village, Lijiang as an Example
A Solar Powered Battery Charger with Pulse Charging Method and Maximum Power Point Tracking Method
The Calculation of Radiation and Optimum Tilt Angle on the Inclined Plane of South-Facing Collector in Winter Months
Estimation of Daily Global Solar Radiation with Measured Meteorological Data in Xining, China
The Application of Image Recognition in Mobile Solar Power Device: Based on Light Intensity Detection in Shaded Area
Selection of Working Fluids for Medium Temperature Heat Pipes Used in Parabolic Trough Solar Receivers
Investigation of Annealing Effect on Optoelectronic Performance of Active Layer in Poly Organic Solar Cell
Review of Economic Operation Optimization Strategy of Photovoltaic Grid-Connected System
Effects of Tube Space on the Thermal Performance of Water-in-Glass Evacuated Tube Solar Water Heaters
High Instantaneous Efficiency and High Flow Rate Slotted-Plate Solar Collectors
Experimental Investigation of Solar Photovoltaic, Heat Coupling Water Source Heat Pump Heating System
Numerical Simulation Study of a New Type Solar Collector Wall System
Study on Evacuated Tubular Solar Air Collector with Inserted Tubes
Point-Location Problem for Indoor Daylight Factor Computations
Periodic Nanostructured Thin-Film Solar Cells
Feasibility Analysis of Hybrid Power System Used on Solar-Powered Aircraft
Quantum Cutting down Conversion by Cooperative Energy Transfer from Tb3+ to Yb3+ in CeF3 Nanophosphors
Design and Implementation of a Photovoltaic Power System with Bi-Directional Inverter
Research on Short-Term Load Prediction Including the Photovoltaic System
Numerical Simulation of Air Flow in BiPV-Trombe Wall
A Numerical Study on Integral Solar Air Collector
The Study and Design of 20kW Photovoltaic Power System
Modular Design of Control System for Photovoltaic Inverter
The Challenges and Strategies of Diffusion for Solar Energy Application on Taiwan Buildings
Research on Control Strategy of the Stand-Alone PV/Battery System
PV System Power Forecasting Based on Neural Network with Fuzzy Processing of Weather Factors
Research on the Solar Water Heating System Based on the Internet of Things
Development of Empirical Equations for Irradiance Profile of a Standard Parabolic Trough Collector Using Monte Carlo Ray Tracing Technique
Experimental Investigation and the Development of Phase Change Heat Storage Device Adapted to the Solar Energy Heat Pump
Optimization Design on Experimental System for Space Heating of a Ground Coupled Heat Pump with Solar Thermal Collectors
An Optimized MPP Tracking Algorithm under Partially Shaded Conditions in Photovoltaic System
Fault Tree Establishment of Lightning Protection System Safety of Solar Photovoltaic Building
Analysis of a New Life Cycle Assessment Model Based on the Solar Building Integrated Technology
Novel Post-Treatment Process by La3+ Modification to TiO2 Photoanode with Enhanced Performance for DSSCs
Performance Study of a Solar Adsorption Refrigeration System
Integrated Design of Solar Water Heater System and High-Rise Residential Buildings
Chapter 2: Development and Utilization of Wind Energy
The Equivalent Method of Wind Farms Considering Wake Effect
Thermal Analysis and Design of the Cryogenic System for 12 MW Offshore Superconducting Wind Turbine
Slip Analysis of Wind Turbine Angular Contact Ball Bearing
SPIV Analysis of the Tip Vortex Evolution of a Horizontal Axis Wind Turbine
Research of Aggregated Wind Power Prediction Method for a Region
Study on Stability Improvement of Wind Farm Integrated to Weak Grid by VSC-HVDC
Optimization Allocation of Standalone Microgrid Capacity Based on the Complementary Characteristic of Wind and Solar
Analysis of Power Flow on Power System with Wind Power Grid
Combining AHP and TOPSIS Methods to Evaluate Investment for Wind Farm Construction
The Review on the Topology of Battery-Supercapacitor Hybrid System Applied into the Real-Time Wind Power Suppression
Modeling and Analysis of Large-Scale Wind Power Cluster Effect
The Optimal Spinning Reserve Considering Wind Power Prediction Deviation
Performance Testing and Dimensional Analysis of Multi-Blade Wind Turbine for Low Wind Speed Applications
Effect of Wind Farm on Transient and Small-Signal Stability Based on BPA
A New Structure for Low Speed Wind Turbine in Built-Up Areas
Subsynchronous Interaction and its Mitigation in DFIG-Based Wind Farm and Turbine-Generator Bundled Systems
Numerical Simulation Study of Wind and Wave Energy in Yellow River Delta
Power Quality Simulation of Grid-Connected Doubly Fed Wind Turbine
Sensorless Control of Doubly-Fed Induction Generator Based on Adaptive Sliding-Mode Observer
The Time Domain Analysis of the Flutter of Wind Turbine Blade Combined with Eigenvalue Approach
Study on Power Characteristics of Hybrid Wind, Photovoltaic Generation and Energy Storage
Multi-Objective Optimal Dispatch of Power System with Wind Power Based on Improved Particle Swarm Algorithm
A Hybrid Short-Term Wind Speed Forecasting Model Based on Wavelet Decomposition and Extreme Learning Machine
Analysis on Low-Carbon Comprehensive Benefit of Wind Power
Analysis on the Policies of Wind Power Generation Industry in China - In the Perspective of Externality Theory
Research on Preventive Maintenance Cycle Decision of Wind Turbine
Study on Automatic Active Power Control System of Wind Farms
The Power of Wind Turbine Generators Prediction Model Based on Time Series
Security and Economy Analysis of Power Grid Considering the Uncertainty of Demand Side and Generation Side
Regional Wind Power Forecasting Based on Cloud Model and Wind Rate Vector
Considering Wind Power Abortively Based on Petri Net Research on Optimization of Hydropower
An Multi-Objective Optimization Model for Wind-Storage Combined Operation
Impact of Wind Farms on the Voltage of the Grid Integrated under the Ramp Changing Wind Speed
A MPPT Strategy for Wind Power PMSG System with Full Power Converter
The Study of VSC-HVDC System Simplified Model on Large Offshore Wind Farm
Chapter 3: Development and Utilization of Biomass Energy
Investigation of Thermoelectric Power Generation Module on Waste Heat Recovery in a Downdraft Gasifier
Progress of Biomass Gasification Technology in China
Feature Analysis during Corn Stover being Enzymatic Hydrolyzed into Fermentable Sugars
Biomass Oxygen-Enriched Gasification in a Pressurized Fluidized Bed for Production of Middle/High Heat-Value Fuel Gas
Overexpression of atpI Encoding ATP Synthase Enhances the Electricity Production in Microbial Fuel Cells
Biomass Catalysis Pyrolysis for Furans Chemicals
Electricity Generation from Crystal Violet Using a Single-Chambered Microbial Fuel Cell Inoculated Aeromonas hydrophila YC 57
Research Progress on Biomass Liquid-Fuel Products by Thermo-Chemical Conversion
Thermal Characterization Study of Eucalyptus Sourced from South China with Thermo-Kinetic Analysis Method
Formic Acid Production from Hydrothermal Reaction of Cellulose
Predicting Main Fatty Acids, Oil and Protein Content in Intact Single Seeds of Groundnut by near Infrared Reflectance Spectroscopy
Hydrothermal Conversion of Cellulose into Organic Acids by Metal Oxides
Conversion of Microalgae under Hydrothermal Conditions
Effects of Primary Settling Tank on Denitrifying Phosphorus Removal in a Full-Scale AAO Process
Dynamic Model of Rapeseed Oil Hydrolysis Reaction in Sub-Critical Water
Unconventional Type of Biomass Suitable for the Production of Biofuels
Co-Pyrolysis Charateristics Study of Dianchi Lake Sludge and Coal
Experimental Research of Biomass Pyrolysis Characteristics at Low Temperature
Preparation of Activated Carbon from Formic Acid Hydrolysis Residue by Chemical Activation of ZnCl2
Potassium Solubility of the Fly Ash from Corn Straw Power Plant
Economic Analysis of Biogas Cogeneration Systems of Medium-Sized Breeding Plants
Marginal Land-Based Biomass Energy Production in Yellow River Delta
Pyrolytic Behavior and Kinetic Analysis of Wheat Straw and Lignocellulosic Biomass Model Compound
A Research on the Performance of a Common Rail Diesel Engine Fueled with Different Blending Ratio of Biodiesels
Chapter 4: Energy Storage Technology
Application of Technology of the Internet of Things on the Monitoring of Geothermal Field
Power Supply & Storage Capacity of Distribution Network with Multiple Energy Storage Systems and its Application
Optimal Sizing of Battery Energy Storage System in Distribution Network
New Approach to Fabricate Microcapsules with Comb-Like Copolymer Shell by Phase Separation Method
Simulation on Control Strategies of Hybrid Energy Storage
Energy Efficiency Analysis of Preheating Boiler Feedwater System with Air Source Heat Pump
Thermal Conductivity Enhancement in a Latent Heat Storage Device
A Nonlinear Piezoelectric Energy Harvester from the Vibration of Magnetic Levitation
The Isolation DC-DC Partial Voltage Charge Equalization on Lithium-Ion Power Battery
Research on Designation and Control System of A-NPC Three-Level Battery Power Storage Converter
Control Strategy of the Hybrid Energy Storage System for Leveling Off Fluctuating Power Output of Stand-Alone Photovoltaic System
Chapter 5: nergy onsumption and Energy-Saving Technology
The Passive Ventilation Energy-Saving Strategies of Urban Long-Distance Bus Station
Greenhouse Earth to Air Heat Exchanger and its Research Progress
Analysis of Energy-Saving and Pollutant Emission for Different Floor-Radiation Heating Control Modes
Study of the Energy Consumption Characteristic of a 1000MW Ultra-Supercritical Unit
Effect of Apply Pinch Analysis Theory to Distributed Energy Systems Integration
Analysis of Cement Kiln Waste Heat Power Generation System Using the Exergy Analysis Method
Review on the Heat Transfer Enhancement by Inserting Circular Cylinders
A Numerical Study on Heat Transfer Enhancement of Automobile Thermoelectric Generator
Deviation Analysis on Flow and Heat Transfer Model of Large Air-Cooled Steam Condenser Unit
The Application of the Green Energy in HVAC
Development of Special Users' Energy Saving Potential New Intelligent Diagnosis Detector Based on DSP2812 Technology
Optimization of Condenser Vacuum Based on Neural Network and SA-BBO
Simulation and Analysis of Ship Energy Efficiency Operation Index
Energy-Saving Blast Dehumidification System for Blast Furnace
Mechanism of Energy-Consumption Benchmark State for Coal-Fired Power Units with Varying Boundary
Numerical Simulation of Corrugated Depth on the Performance of Plate Heat Exchanger
Energy Saving Application in Constant Pressure Water Supply System Based on SANCO - vm05 Frequency Converter
The Research on Energy Saving of Pump Fluid Conveying System
Numerical Simulation and Experimental Validation of a Vertical U-Tube Ground Heat Exchanger
Co-Benefit Analysis on Fuel-Switching Project for District Heating
Research on the Technology of Intelligent Control Terminal Personalized Heating Heating System
Application Research of Reclaimed Water Source Heat Pump Techniques in Beijing
Research on Reclaimed Water Heat Energy Conditions and Application in Beijing
Analysis of Ejector in Central Air Conditioner Combined with Solar Ejector Refrigeration System
Analysis on Chilled Water Spraying through Extraction Opening in Condenser to Enhance Extraction Effect of Vacuum Pump
Research on the Industrial Energy Use of Sustainable Development Test Zone in Beijing
The Dispatch Method Based on Demand Response under the Pressure of Energy-Saving
Numerical Simulation of a Shell-and-Tube Heat Exchanger with Special Form Helical Baffles
Review of Study on the Early-Warning System of Energy Conservation
Aspen Simulation of Heat Exchange Network for the Conversion System of Sulphuric Acid Made with the Sulphur
Aspen Optimization of Heat Exchange Network for the Conversion System of Sulphuric Acid Made with the Sulphur
Investigation on the Simulation of Control Strategy for a SCR System
Study on Creep Behaviors of T92 Steel under Multiaxial Stress State
Research on Resistance Spot Welding of DP980 Dual Phase Steel
The Analysis of Current Implementation Mechanism of Green Power
Chapter 6: Hydrogen and Fuel Cell
Enhanced Anticorrosion Properties of SnO2 Coatings in Simulated PEMFC Environments by Hydrothermal Treatment
A Review of Pt-Based Anode Catalysts Preparation for Direct Ethanol Fuel Cell
Chapter 6: Hydrogen and Fuel Cell
Synthesis and Characterization of Sulfonated Polybenzimidazole (SPBI) Copolymer for Polymer Exchange Membrane Fuel Cell
Electrical Characterization of YSZ/YSZ-NiO Grown by Pulsed Laser Deposition for Low Temperature Solid Oxide Fuel Cells
Recent Progress for TiO2 as the Support of Electrocatalysts in Fuel Cell Applications
New Progress in Microbial Fuel Cells and its Outlook
Preparation of Co3Ni Film Composed of Nanosheets and their Catalytic Activity in Hydrogen Generation from Sodium Borohydride Solution
A Review of Pd-Based Electrocatalyst for the Ethanol Oxidation Reaction in Alkaline Medium
Multi-Walled Carbon Nanotubes as Electrocatalyst Supports for H2O2 Reduction Reaction
Influence of Ethanol Catalyzed Oxidation on the Activity of Pd/C with Different Ratio of Pd and Carbon
Analysis on some Key Problems of High Power DCDC Converter for Fuel Cell Electrical Bus
Chapter 7: Energy Materials
Preparation of SiO2 Antireflective Film by a Base/Acid Two-Step Catalyzed Sol-Gel Process
Effect of the Precursor Solution Concentration and Modification Ions on the Catalytic Property of La-Hexaaluminate Catalysts
Progress of Research on Modification in Polybutylene Terephthalate
The Investigation of Phase Change Emulsion (PCE): Fabrication, Thermal Conductivity and Utilization of Nanoparticles
An Inverse Research Method for the Radiation Characteristics Based on Particle Swarm Optimization Algorithm
Finite Element Analysis of Piezoelectric Materials
Research Progress of Layered xLi2MnO3-(1-x) LiMO2(M=Ni,Co,Mn...) Solid Solution Materials
Crystallization Behavior and Infrared Radiation Properties of Copper Ferrite-Doped MgO-Al2O3-SiO2 Ceramics
Preparation of High Voltage Spinel LiNi0.5Mn1.5O4 Cathode Material Using Polymer-Assisted Co-Precipitation Procedure
Growth of Thick Ge Epilayers on Si(100) Substrates Utilizing Two-Step Approach by Ultrahigh Vacuum Chemical Vapor Deposition
Analysis on the Micro Surface Morphology of Aged Oil-Paper Used in Power Transformer
Kinetics Modeling of Parabolic Growth Competing to Linear Declining: A Theoretical Tool to Interpret Corrosion Data in Real World
Preparation and Characterization of Porous Silica Antireflective Thin Film on Glass Substrates by Chemical Etching
Photocatalysis Reactivity in the Visible Light of B-Doped TiO2 Nanotube Arrays
Influence of Acetylene Black Colloidal Solution on the Reactivation of the Simulation and Deactivation PbO2/PbSO4 Electrode
The Development Trends of Renewable Energy at Home and Abroad and Material Problems
Effects of Additional Mg2+ on the Growth and Lipid Accumulation of Monoraphidium Sp. FXY-10 under Mixotrophic Conditions
Synthesis, Characterization and Electrochemistry of Cathode Material Li [Li0.2Mn0.54Ni0.13Co0.13]O2 Nanofibers Prepared by Electrospinning for Lithium Ion Batteries
High Performance SiOC Composites as the Anode Material for Lithium-Ion Batteries Synthesized by Ball Milling
Optimizing Design of LEDs with Photonic Crystal and Planer Micro Cavity for High Extraction Efficiency
Experimental Study on the Preparation Process of Binary Carbonate Salts
Review on Phase Change Material Slurries
Study on Al2O3 Coated Carbon Sulfur Composite Materials for Lithium-Ion Battery
Comparison of Lini0.5Mn1.5O4 and LiMn2O4 for Lithium-Ion Battery
Contrastive Analysis on Low Temperature Carbonization of Longkou and Yaojie Oil Shale in Aluminum Retort
Analysis on Fracture Morphology and Microstructure of T92 Steel after High Temperature Multiaxial Creep
Research on Creep-Fatigue Life Prediction for P92 Steel under Stress-Controlled State
Laboratory Simulation of Radon Migration in Porous Aquifer Medium
Chapter 8: Energy Chemical Engineering
N2 and CO Desorption from Interaction between NO and Nitrogen-Containing Char
Experiment Research on Power Molding and Destructive Distillation of Yaojie Oil Shale
Process Simulation on Crude Naphthalene Purification by Extractive Distillation
The Effect of Lignite Catalytic Pyrolysis on Liquid Components
Synthesis of Guerbet Alcohol Acrylate Aided by Microwave
Kinetics Analysis of Wheat Straw Pulping Process
Effect of Rare Earth for Removal of Carbonyl Sulfide from Synthesis Gas
Study of Catalytic Cracking of Asphaltene in Near-Critical Water
Development of Polymer Gel Plugging Removal Agent in Suizhong 361 Oilfield
Analysis on Factors Affecting Biodiesel Production Rate Based on Probability Theory
The Calculation of Physicochemical Parameters in the Mimetite Dissolving Process
Effects of Modified Glycerol Distillation Residues (MGDR) on the Performance and Hydration of Portland Cement
Exploring of the Effects of Ionic Liquids on Methane Hydrate Formation
The Sensitivity Analysis of CO2 Recovery & Liquefaction Flowsheet in the Beer Fermentation Process by Aspen Plus Software
Chapter 9: New Energy Vehicles and Electric Vehicles
The Overview of Electric Locomotives Capacitor Bracket Parametric Design Based on the Secondary Development of Pro/E
A Study on the Spray Characteristics of SIDI CNG Engine Based on a Visualization System
Space-Time Modeling of Plug-In Electric Vehicles
Test and Simulation System of Multi-Axis Controller
Coordinated Control for Novel Full Hybrid Vehicles
The Research of New Energy Hybrid Power Technology Based on 100% Low-Floor LRV
Smart Home Energy Management with Electric Vehicles Considering Battery Degradation
Study on Factors Affecting the Range of Electric Vehicle with ADVISOR
Reliability Evaluation of Fast-Charging EV Station Entry to Generation and Transmission Electrical System
Testing of Remote Monitoring Calibration and Diagnostic System for Electric Vehicle
Technical Economic Analysis on V2G Mode Shifting Peak Load
Periodic Control of General Energy Flowing in Charging-Discharging-Storage Integrated Station
Control Strategy of the Charging-Discharging-Storage Integrated Station on Reactive Power/Voltage of Power System
A Study on the Factors Affecting Consumers Adoption Toward Environmentally Friendly Car - Hybrid Car
Modeling and Simulation of LiFePO4 Battery for Electric Vehicle
Discussion of the Relationships among the Main Participants Based on the Electric Vehicle Commercial Mode
Comparative Analysis on Emission between Hybrid and Conventional Vehicles
An Adaptive Charging Control Strategy for Electric Vehicles Based on Wi-Fi Technology
The Application of PLC in the Electric Vehicle AC Charging Technology
Review of Research on Coordinated Charging of Electric Vehicles
Study on the Regularity of EVs' Charging and Discharging Group Behaviors
Chapter 10: Green Building Materials and Energy-Saving Buildings
An Lectotype Analysis of the Architectural Structure of the Hmong in Hunan
Foam Concrete through Electric Technology
Testing and Analysis on Building Thermal Stability in Hot-Humid and Cold-Humid Area in Summer
The Mechanism of Action of the Low Carbon Building Management Base on Structural Equation Modeling
Settlement of Cellulose Insulation
The Interpretation of Norman Foster's Architectural Design Conception
Airtightness and Acoustic Properties of Family House from Straw
Cooling Effect of Waste Fiber Culture Medium Used as Extensive Green Roof
Hygrothermal Behavior of Thermal Insulating Material Based on Technical Hemp and its Application in Construction
Experimental Evidence on the Thermal Performance of Opaque Surfaces in Mediterranean Climate
Experimental Study on Permeability Resistant and Pore Structure of High Content Mineral Admixtures of HPC
Decorative Arts of Gates Detail Components in Chinese Traditional Architecture
Properties of the Dry Masonry Mixtures with Hollow Ceramics Microspheres
Development of Masonry Components Protected against Moisture
Heat Insulation Research on Double-Skin of Architecture in Hot Summer Area
Prediction Study of Capillary Rise Height on Unsaturated Soil
Explore on Design Strategy of Green Materials on Building Based on Low-Carbon Background
Experimental Study in Gangue Base-Course Mixture Materials for Pavement
Analysis of Eco-Design Strategy of Public Buildings in Large Space
Study on the Shear Strength Parameters under Different Freezing and Thawing Cycles of Soil Slope in China
GIS-Based Quantitative Analysis for Mesostructure of Cohesive Soil Containing Calcareous Nodules
The Current Situation, Opportunities and Challenges of Green Construction and Sustainable Development in Chinese Airports
Reinforcement and Reconstruction of Rural Breeding Sheds
Application of BIM Technology in Green Building Engineering Construction
Gelation in Three-Phase Disperse Systems
Experimental Study on Properties of Different Angles of FRP Shear Reinforced Timber Beams
Case Study of Building Energy and Environment Management System on Campus: A Report from Southeast University
Variable Density Cellular Concrete
Study of Traditional Tibetan Architectural Material and Security
The Fuzzy Cluster Analysis Research Methods for Surface Enhanced Materials Resistance to Wind Erosion
Production of Partition Blocks from Synthetic Gypsum
Use of Thermal Insulating Perlite Composite Materials Based on Geocement to Protect Technological Equipment
Experimental Investigation on the Shrinkage and Creep Performance of Self-Compacting Lightweight Concrete
Chapter 11: Engineering Thermophysics
Numerical Study on Effect of Injection Rates on Combustion and Emission Performance
Advances in Working Medium for Organic Rankine Cycle
Study on Gas Turbine-Based CCHP System with Multi-Objective Evaluation Index
Research and Application on the Dynamic Simulation of Natural Gas Pipeline
Experimental Study on Combustion Reaction between Silicon and Nitrogen in Transport Bed
Research on the Applications of Heat Pipes in Cooling Aircraft Electrical Equipment
The Influence of Bluff-Body Structural Parameters and Incoming Velocities on Advanced Vortex Combustor
Research Status and Development Prospect of Optical Fiber High-Temperature Sensors
Forecast Research of Combustion Stability of Pulverized Coal
Research on the Stress of the Oxide Scales on the Superheater Tubes under Uneven Circumferential Loading
Chapter 12: Thermal Engineering
Experimental Study on Rich Oxygen Gasification and Ash Character in Entrainedflow Coal Gasifier
Experimental Research on the Effect of Cross-Wind to Wet-Cooling Tower Performance
Heat Exchange Calculation of a Regenerative Air Heater with Numerical Simulation Method
Study on Cost Allocation in Marine Diesel Engine Cogeneration System
A Study of Multi-Objective Load Optimal Dispatch in Thermal Power Unit Based on Improved Particle Swarm Optimization Algorithm
The Study of Medium/Low-Temperature Stirling Engine Power Output Characteristics
Modification Research on the Tube Layout of One 300MW Unit Condenser
Numerical Study on the Flow and Heat Transfer for the inside of the Cylinder Type Natural Gas Heater
Numerical Simulation of Condenser Combining with Low-Pressure Exhaust Hood and Condenser Throat
Conjugate Heat Transfer in Two Partial Enclosures Connected by Refrigerator/Heater
Safety System Analysis on Gas-Steam Combined Cycle Power Plant
Numerical Simulation and Optimization of the Flow Field in the SCR System
The Influence of Dynamic Load on Ground Source Heat Pump System Performance
The Numerical Analysis of Spiral Heat Exchanger
Analysis on the Heat Transfer Performance of Jacketed Tube Heat Exchanger with Different Finned Array
Analysis of Thermodynamic Performance in NH3/CO2 Cascade Refrigeration System
Chapter 13: Fluid Engineering and Machinery
Performance Testing of Pico Hydro Generator for Electricity Generating
The Experimental and Numerical Study of the Stability of Ultra-High Pressure Water Jet
Non-Deterministic CFD Simulations on the Effect of Uncertain Tip Clearance on an Axial Rotor Performance
The Velocity Distribution for Ferromagnetic Fluids
Application of Fruit Fly Optimization Algorithm-Least Square Support Vector Machine in Fault Diagnosis of Fans
Badminton Performance Test of Wind Tunnel
Hydraulic Turbine Blades Modeling Based on Two-Dimensional Wooden Patterns
Study on BP Neural Network PID Control for Hydro-Viscous Drive System
Numerical Simulation of Fluid-Structure Interaction with Water Hammer in a Vertical Penstock Subjected to High Water Head
Study on Internal Flow Field of Series Pulsed Nozzle
Numerical Investigation of Sediment-Laden Flow in a High-Head Francis Turbine Runner
Experimental Study of the Vertical Hydraulic Drag Force on Regular Tetrahedron
Experimental Investigation and Theoretical Analysis on Galloping of Iced Conductors
Experimental Research on Pressure Loss of an Olivary Flowmeter
Research on Francis Turbine Hydraulic Vibration by CFD
Cause Research about Vibration and Noise Caused by Channel Vortices at High Load in Francis Turbine
Analysis and Application of Radius Calculation Model for Boilover in Crude Oil Tank Fire
The Fault Diagnose of Advanced Amphibious Assault Vehicle Fan Pump Based on Principal Component Regression
Chapter 13: Fluid Engineering and Machinery
Numerical Simulation of Internal Flow Field in Mixed Flow Fan
A Meshless Method for Advection-Diffusion Problems
Finite Element Analysis on Green Grinding Ti6Al4V Alloy with Inner-Lubricating Wheel
Chapter 14: HVAC, Air Conditioning and Refrigeration
Performance Study of the Household Air Conditioner under Extreme Climate Conditions
A Central Air Conditioning System Design for Hotel in Guangzhou
Multiple Models Fuzzy PID Controller Design in Air-Condition Temperature Control System
Carbon Footprint Analysis and Environmental Impact Evaluation of Air Conditioning System
A TRNSYS Component Modeling Method for a New Kind of Solution Dehumidifier
Theoretical Analysis for the Influence of the Regenerative Process on the Trans-Critical CO2 Cycle
Experimental Study on Performance of a Cross-Flow Dehumidifier
Experimental Study on the Characteristics of Jet and Drop Formation Related to a Fluidization Method for Ice Slurry Production
Energy Measurement Method for VRV Air Conditioning Systems in Existing Commercial Buildings: A Case Study from Southeast University
The Analysis of the Feasibility of Summer Air Conditioning Cooling Using Shallow Surface Water in Zhejiang Province
Indoor Thermal Environment Research of Air Conditioning Office with Air from Window Gap
A Double-Layers Energy Efficiency Evaluation Method of Central Air-Conditioning System
Design of Multi-Function Refrigerator with Refrigeration and Constant Temperature and Hot Water
Study of an Atmospheric Freeze Drying Refrigeration System
Effect of Ventilation Systems on Stator Thermal Field of Induction Machines
Chapter 15: Power Machinery and Engineering
The Performance of a Common Rail Diesel Engine Fueled with Different Blending Ratio of Biodiesels at Different Altitudes
Risk Analysis and Evaluation of Power Plant Equipment
Design of Bilateral Switched Reluctance Linear Generator to Convert Wave Energy: Case Study in Sicily
Dynamic Crankshaft Strength Calculation of Diesel Engine Using Simulation Techniques
EGR System Performance Optimization of Diesel Engine Based on GT-Power and Fluent Co-Simulation
Development and Performance Evaluation of EGR System on Light Duty Vehicle
Simulation Analysis and Evaluation of Inner Airflow Characteristics on the 2.0L Di Engine
Research on Feed-Forward Controller for Electronic Throttle Control of GDI Engine Based on Nonlinear Model
Analysis of Vehicle Dynamic Performance Based on MATLAB
Numerical Simulation Study of the Influence of Structural Parameters of Combustion Chamber on In-Cylinder Flow Field of Diesel Engine
Full Power Back-to-Back Test Platform for Large Scale Electrical-Excited Direct Driven Wind Turbine
Investigation on the Match between the Nozzle Tip Penetration and the Double-Layers Diffluent Combustion Chamber Geometry
Research on Transmission Principle of Gearless Reducer
Diamond-Nickel Composite Plated Grinding Needle Used for Finish of Airflow Channel on the Gas Turbine Blade
Researches on Electronic Control System of Diesel-CNG Dual Fuel Engine
Motion Characteristics and Influence Factors of Piston Assembly in a Compression-Ignition Hydraulic Free-Piston Engine
Effects of Ethanol-n butanol-diesel Oxygenated Fuel on Performance of Diesel Engine
Effect of Steam Turbine Rotor Notch Fillet Radius on Stress and Deformation
The Impact Analysis of Regenerative System in Turbine Modeling
The Determination of Stagnant Rate of Servo System Based on Adaptive Chatter Algorithm
The Research of the Jam Fault Features and Diagnostic Methods of the Slide Valve Oil Motive Based on DEH Data
The Measuring Method of Static Delay Rate Based on the Frequency Step Disturbance
An Independent Component Analysis Based on Sliding Window Statistics and its Application to Power Plant Equipment State Monitoring
Research on Simulation of Urea-SCR Injection System for Marine Diesel Engine
Rolling Bearing Fault Diagnosis Method Using Glowworm Swarm Optimization and Artificial Neural Network
Labyrinth of High Parameter Valve Technology Application and Prospects in the Power Plant
CFX Modeling of an Axial Turbine with Symmetrical Blades and Reversible Flow for Tidal Power Plants
Synthesis, Physicochemical, and Tribological Characterization of Nano Lubricant Contained Cu Nanocolloid as Additive
Chapter 16: Power System and Automation
Security Pricing Model Based on Dynamical Security Region under Power Market Environments
Research on Application of Synchronized Phasor Measurement Unit (PMU) for Smart Substation
Fault Response of Inverter-Based Distributed Generators in Distribution Network
Demand Response Based Household Electricity Intelligent Interactive Terminal Design
Online Decision Support Index System Suite for Limiting Short Circuit Current
Big Data Analytics-Based Energy-Consumption Feature Selection of Large Thermal Power Units
Optimized Control of DC Voltage Based on BP Neural Network in Active Power Filter
Smart Power Meter System Based on ZigBee
The Comprehensive Efficiency Evaluation of Electrical Power System of China Based on Data Envelopment Analysis
Study on Reliability Evaluation Method of Components without Enough Fault Data
Power Quality Disturbances Classification Based on Modified S Transform and Decision Tree
Research on TCSC and Active Power Filter Apply to Improve Power Grid Based on Matlab Analysis
Comprehensive Assessment System and Method of Smart Distribution Grid
Study on a Service Mechanism that Wind/Photovoltaic/Energy Storage Power Station Help Wind Farms Tracking Generation Schedule Curve
Short-Circuit Current Criterion under Condition of Protection Action in Low Voltage Power Supply System
The Interconnection Protection of the MV Multiple Microgrid
Multi-Level Fault Diagnosis of Power Transformer Based on Fusion Technology
A New Fast Method Used For Calculating Power Flow Based on ODE
An Advanced Algorithm of Power Flow Calculation for Radial Distribution Networks
Modeling Methods of Impact Load on PSASP
The Trans-Provincial Peak Regulation Market Design
Calculation of Short Circuit Current Based on Equipment Graphics Database
Calculation Method Research about Theoretical Line Loss' Boundary of Distribution Network
Branch-Current Algorithm Based Three-Phase State Estimation in Distribution System
Improved Algorithm for Complex Distribution System Reliability and its Programming
Test Method for Resistive Current of Arrester for Cable Line Based on Phase Search
Development of Relay Device in Monitoring Data Management of Cable Circulation in Urban Power Grid
Fault Location and Isolation Algorithm for Distribution Network with DGs
The Grid Harmonic Amplification and Transmission Characteristics Research
Probability Analysis Method of Power System Cascading Failures Caused by Extreme Hot Weather
The Impedance Calculation Methods Using Damped Sinusoidal Signal
Shunt Petersen-Coil with Resistor for Single Phase Fault Detection in Resonant Grounded Power Distribution Systems
Realization of Economic Load Dispatch of the Electric Power System Based on Artificial Fish Swarm Algorithm
An Optimal Automatic Generation Control Strategy for Interconnected Power Grid with Wind Power
An Communication and Battery Performance Evaluation of the Demand Response and Battery Storage Coordination System Potential for Providing Microgrid Tie-Line Smoothing Services
Study on Detection Method of Electrical Shock Current Based on Sliding Window and Wavelet Transform
Economic Load Dispatch Using Bacterial Foraging Optimization Algorithm Based on Evolution Strategies
Technology for Transformer Fault Diagnosis with Detection and Monitoring Data Fusion
Based on Delay Compensation System for Shunt Active Power Filter Research
A Kind of Equipment Fault Indicator Recognition Method
Research on Monitoring System of Hydropower Substation Based on RFID Technology
Analysis on Sub-Synchronous Damping Characteristic of VSC-HVDC
The Application of Safety and Stability Control Device in Middle of Henan Power Grid
An Adequacy Decision Model Incorporating Wind Power and Electric Energy Storage at the Distribution Level
Fault Location Method Based on Wide-Area Voltage
Imprecise Adequacy Assessment of Generating System Incorporating Wind Power Based on Interval Probability
Review of Power System Analysis Methods Considering Correlation of Wind-Photovoltaic-Load
Application of Real-Time Risk Assessment Method in Dispatching Operation
Application of Improved Ant Colony Optimization on Economical Operation of Automatic Generation Control Units in Hydropower Station
Reliability Evaluation & Analysis of UHVDC Transmission System
Feasibility Boundary Evaluation Using Eigenproperties of Jacobi Matrix from the Power Flow Routine
Low-Frequency Oscillations Identification in Interconnected Power System Using PMU
Study on the Calculation of Power Grid Asset Utilization Index
The Simulation Research of Partial Discharge Electromagnetic Wave Propagation Characteristics in GIS
Technical Feasibility of Distributed Generation Network Connection
Complex Urban Distribution Network Wiring Pattern Matching Research Related to the Load Density
Chapter 17: High Voltage and Insulation Technology
The Study of Insulator Influence to the Electromagnetic Wave Propagation in GIS
Parameter Identification for Power Transformer Using Zooming Genetic Algorithms
The Assessment of the Overload Capacity of Transformer Based on the Temperature Reverse Extrapolation Method
Application of FTA and Improved FAHP in Power Transformer Risk Assessment
Study of PD Ultrasonic Wave's Properties in Solid Medium
Quantitative Analysis of Rogowski CT Frequency Characteristics
Improved Algorithm on Wide Range Positioning for Partial Discharge in Substation
The Research and Establishment of GIS Fault Simulation Test System
The Study of the Partial Discharge Characteristics of Floating Potential Defects in GIS
Influence Factor Study of Oscillating Impulse Voltage Generator
Research of Discharge Characteristics of CO2 Gas in Small Distance
A Study on Magnetism-Driven Gliding Arc Discharge
Electric Field Calculation Software for Epoxy Resin Casting Dry-Type Transformer Based on the VB
Chapter 18: Motor and Electric Equipment
Marine Asynchronous Propulsion Motor Parameter Identification Using Dynamic Particle Swarm Optimization
Study on Switch-On and Switch-Off Time of On-Line Monitoring for the Vacuum Circuit Breaker in Traction Substation
Lissajous Curve of an Auxiliary Winding Voltage Park Components for Doubly-Fed Induction Machine Electrical Faults Diagnosis
Research of a Hybrid Controllable Reactor
Cotrolling Characteristic Analysis of Magnetically Controlled Shunt Reactor Based on Field-Circuit Coupled
Simplified Model Reference Adaptive Method for Sensorless Vector Control of PMSM
An Analytical Model for Leakage Effect in the Electrical Generator of Rim-Driven Marine Current Power System
Researched on the Characteristics of Self-Excited Induction Generator
The Analysis on the Effect of Ground Reflection in the Noise Test of Aircraft Engine
Design and Calibration of Inductive Current Transformer
Chapter 19: Electrical Theory and New Technology
A Fault Diagnosis Method in VSC-HVDC Simulation System Based on BRBP Neural Networks
Improving the Transfer Efficiency of a Wireless Energy Transfer System Using Multiple Coils
A New Supercapacitors Fractional Order Nonlinear Model
Characteristic Analysis of the Magnetic Field Induced by Ocean Waves and the Filtering Method in Marine Magnetic Survey
Construction for True Three-Dimensional Imaging Display System and Analysis Based on State-Space Model
Wide-Band Modeling of Grounding Grid Based on the Fractional Order Differential Theory
Immunity Test of a Microcontroller by Using Transmission Line Pulse Generator
Study on Partial Discharge of Electric Equipment Based on Ultraviolet Imaging Technology
A Fractional Order Circuit Model of the PT
Sensitivity Analysis of the Networks with Fractional Order Reactance
Study on Distribution Model of Electric Field for 220 kV Transmission Lines and Implement
Application of SENLAN SB60 in Flow Variable Frequency Speed Control System
Chapter 20: Power Electronics and Power Drives
Experimental Testing of Hydroinsulating Injection Screens
Feedback Linearization Controller for MMC-HVDC System Connecting to Passive Networks
Study on Fuzzy PI Control Strategies of Networked Control System
Control of Grid-Side MMC for Wave Power Generation
Design of Intelligent Greenhouse Control System Based on PSoC Platform
Technique of Digital SPWM Inverter Based on PRE Control
DCM Analysis of ZVS PWM Full-Bridge Converter with Current Doubler Rectifier
Hardware Design for Simulating the Chaos in Electric Arc Furnace
Design of Driving Circuit of Area Array CCD with Interline Transfer Based on FPGA
A Novel Pulse Frequency Modulation Technique for DC/DC Converter
Simulation and Research on the Improved Boost Circuit Based on Multisim
Passivity Based Hybrid Controller of Dual Euler Lagrange Model of Three-Level Three-Phase Neutral Point Clamped Voltage Source Rectifier
Chapter 20: Power Electronics and Power Drives
Research on a Nonlinear Control Strategy for Three-Phase Voltage Sources PWM Rectifier with Resistive and Inductive Load
Implementation and Design of Voltage-Mode PFM Control Buck Power Converter
Quality Control Scheme Design on Remanufactured Engine Electronic Control Unit
Design and Application of Power Active Filter Harmonic Extract Technology
The Application of Phase Shift Control Technology in the Ultrasonic Power supply
Modeling and Simulation of Pressure Control Logic Module in Pressurizer of Nuclear Power Plant
Chapter 21: Smart Grid Technologies
Study on Asynchronous Sampling in Digital Electrical Energy Metering Based on IEC61850
Genetic Based Reinforcement Learning Load Control for Smart Grids
Research on Heterogeneous Cloud Service Model for Smart Grid Business Application
Modeling of Incentive Interruptible Load Contract for Practical Application
Optimal Allocation of Different Types of DG Sources Considering the Impact on Power Losses and Voltage in Distribution Networks
The Empirical Study of Demand-Side Response Model Based on the Maximize Benefits under the Background of Smart Power Grid
The Effect Research of Smart Grid to Residential Users Intelligent Response Behavior
The Study of Knowledge-Based Active Learning Grid Operation Experience
Design of the Zigbee-Based Front-End Sub-System of a Smart Control System for Power Consuming Network
Improved GSA-GA Algorithm Based Bad Data Detection, Identification and Correction for Power Grid
Research of DC Micro-Grid Photovoltaic Energy Storage System Control Strategy
A Simulation Framework for Grid-Consumer Interoperability
Modeling and Simulation of Compressed Air Energy Storage (CAES) System for Electromechanical Transient Analysis of Power System
Load Scheduling Strategies Based on Dynamic Price in Smart Grid
High Precision Time Synchronization Algorithm for Smart Grid Based on Adaptive Filtering with Modified Particle Swarm Optimization
Research on Key Indicators of Operational Warning System of Grid Enterprises Based on BSC-ISM Method
Chapter 22: Power System Management
Forecasting Residential Electricity Based on FOAGMNN
Data Intergration of Power Information System Based on Ontology
The Research of BP-PSO Optimization Method in Electric Power Market Analysis and Forecast
Wind Power Output Prediction with BP Neural Network Combining Genetic Algorithms
Reconfiguration of the Shipboard Power System Based on Particle Swarm Optimization with Non-Clique Topology
500kV Substation Service Power System Modeling Research Based on Least Square Method with Parameter Optimization by SPO
The Application of Analytic Hierarchy Process (AHP) in the Power Grid Planning
Fuzzy Comprehensive Assessment of Urban Underground Power Cable Infrastructure Safety Risk
The Optimization of Interruptible Load Based on the Minimum Network Loss
Study on Rush-Repair Scheme for Distribution Network Fault
A Novel Prediction Method for Electric Power Demand Based on Markov Chain Model with a Fuzzy Probability
A Study on Locational Marginal Prices Based on Single-Stage and Multi-Stage Optimization Models
A Power Quality Study of Metro Transit Railway Based on Field Measurement
Framework Design of Provincial Electric Power Company Operation Monitoring and Decision-Making Simulation
Electric Power Informatization of China: A Review
The Research of Optimization Method of Distribution Maintenance
Research of the Power Control for a MCFC/GT Hybrid System
Impact of Coal-Electricity Integration on Chinas Power Grid Development Strategy
Robust Optimization of Steam Power System
Short Term Load Forecasting Based on Improved RBF Neural Network
Risk Decision Analysis on the Electricity Transaction of Power Enterprises in Electricity and Derivative Transactions
Study on the Management Model of Pumped Storage Power Station
Research on Analysis and Evaluation System of Power Grid Enterprises Asset Quality
Chapter 23: Product Design and Manufacturing Automation
Design of a New Micro Single Flute Drill
3D Remodeling of Molds Broken Area Based on Reverse Engineering
Research and Development of Measurement System for Control Circuit Board of Residual Current Fire Monitoring Detector
Dynamics Simulation Research of Planar Four-Bar Mechanism with Multi-Joint Clearance
Design about Automatic Vehicles Following System for Field Vibrator Motorcade
Ergonomics in Universal Design
Multi-Objective Optimization of Manufacturing Workshop Layout Based on Improved Genetic Algorithm
Digital Model Research on and Design of Large Plate Column
Structure Design of Inner Lubricating Wheel with Vane Impeller Base on Green Grinding
The Research of Moulds Digital Repairing Based on Laser Cladding
Variable Speed Control and Programming of Stepper Motor in Numerical Control System
Dynamic Process of Quality Abnormal Pattern Recognition Based on PCA-SVM
The Technological Study about Cutting Stainless Substrate by Nd:YAG Laser
Integration of the Local Wisdom of Natural-Dyed Mud-Treated Silk in Thailand for Creative Economy
A Model of Adhesive Contact between a Spherical Tip and a Flat Surface
Optimize Design on the Key Parts of Ring Die Fuel Pellet Machine
Chapter 24: Precision Automation
Meta-Consensus: Consensus as a Fundamental Concept on Swarm System Dynamics and Formation Control
Dynamic Performance Simulation Analysis and Experimental Research of Ball Cage Patterned Constant Speed Universal Joint Based on Workbench
A Novel Method of Measuring Gap and Surface Differential Used in Headlights Contour Detection
On Solutions of Inverse Problem for Hermitian Generalized Hamiltonian Matrices
Shift Control Strategy of Three-Parameter for AMT
Study on a Pneumatic Artificial Muscle Actuator
Chapter 25: Application of Computer and Information Technology in Industry
Research of Multi-Sensor Information Fusion Fire Detection System
The Research of Malicious Code's Spread and Found Technology
The SIP Security Communication Base on Improved Key Agreement Algorithm
Research of Botnet Base on P2P Protocol
Family Health Telemonitoring System Based on WSN
A Multi-Objective Optimization Method for System Reliability Allocation
Distributed Remote Monitoring System Key Technology Research on Agent
Comparison of Thresholding and Edge Detection Segmentation Techniques
Parking Guidance System Based on RFID
The Design of a Wavelet-Based Neural Network Adaptive Filter
Improving Chemistry Supply Chain with Business Intelligence Architecture Updates
An Improved Fast Normalized Cross Correlation Algorithm
Real-Time Acquisition System of Multi-Channel Signal Based on PCI
On Boundedness of Random Solutions of Perturbed Stochastic Discrete Systems
Dynamic Joint Decision on Price and Delivery Date in MTO Manufacturer Based on Agent
Research of Location Technology Based on Wireless Sensor Network
Construction Materials Management System Design Based on Barcode
Periodic Solutions for Nonlinear Evolution Equations in RN
Research on Unified Storage Format for Building Information Modeling
System for Measuring the Burst Point Time Base on APD
Design of Intellectualized Monitoring Module Based on CAN Fieldbus for Air Pipeline of Marine
Image Fusion Algorithm Based on Wavelet Transform and Laplacian Pyramid
The Hardware Design and Implementation of Liquid Level Detection System for Lead-Acid Battery
Research on Image Fusion Based on Pyramid Decomposition
Medical Image Edge Detection Analysis Method Based on Fractional Differential
Devaluation Modelling for Residantial Buildings
An Algorithm to Extract the Contour of Region with Visual C++
Application of Improved BP Neural Network in Threshold Selection for Image Processing
Based on Wireless Sensing Network Electronic Car License System Design and Research
Design of Multiple Hetegenous Protocols Conversion of Home Gateway Based on Task Description
Research on Edge Detection Technology
Research on Threshold Segmentation Algorithms
License Plate Recognition Based on Neural Network Algorithm to Improve Research
The Research on Cloud Manufacturing Service Discovery Strategy Based on Mapping Reuse
The Design of Patrol System Based on Image Acquisition
The Environmental Information Monitoring Network Set up Based on Service Discovery Mechanism
A Fractional-order Sobel Operator for Medical Image Structure Feature Extraction
Topic Detection and Tracking Method for Tibetan Network
Study on Pulse-Signal Detection Methods Using Wavelet Transform and Hilbert Huang Transform
Pitch Perception of Medium-Rank Harmonic Complex Tones Based on Temporal Analysis
The Application Research on Logistics of Dangerous Chemical Cargoes Based on the Technology of Internet of Things
Two-Stage Local Polynomial Regression Method for Image Heteroscedastic Noise Removal
Triple Wronskian Representation of the Multi-Soliton Solutions for a Coupled GMNLS Equations
Technology of Image Compression Coding Based on Walsh Transform
Semantic Analysis Investigation of Data Mining Technology in Network Forum
Research on Intelligent Regulation of Ship-to-Ship Crude Oil Transfer at Sea Based on Internet of Things
The Factors that Influence the Intelligence Utilization of College Students Serving in Rural Areas-Based on the Investigation of the Needs of College Students in Wuhan Province
The Limitation of Free Float and Safety Float and the Introduction of Composite Free Float and Composite Safety Float in CPM Network
Contact Stress Analysis of Packer Rubber Based on ANSYS Software
Reliability Analysis of Suspension Bridge Using Gaussian Process Based Response Surface Method
Aeolian Vibration Analysis of Different Node Connectivity Steel Rods
Chapter 26: Engineering Education
The Developmental Research of HeBei Province High Level Innovative and Creative Talents on the Cooperative Development of Beijing, Tianjin and HeBei Province
The Niche Vision of the Development of Higher Education for the Deaf in China
The Research on the Teaching Model of Operations Research
A Thought on Improving the Training System to Enhance the Postdoctoral Innovation Capability
Research of the Effect Factors of College Graduates' Employability Based on the Perspective of Education
The Configuration of Scientific and Technical Personnel Entrepreneurial Intention Model Based on Theory of Planned Behavior
Post Bifurcations of the Concept of the Sustainable Development in Construction Business and Education
Oral English Teaching Context Construction Based on New Media Environment
Research on Application of the Internet of Things in University's Teaching Management
Data Envelopment Analysis (DEA) in the Education Expenditure Performance Evaluation
An Exploration of the Holiday Independent Practice of College Nursing Students
Chapter 27: Project Management and Engineering Management
The Introduction and the Calculation of Virtual Expense Ratio in Decision Critical Path Method (DCPM)
A Proposal to Leverage Improvements on Integrated Management Systems Applying Zachmans Corporative Architecture
A Study of PCI Model in Construction Quality Control
Research on the Contribution Degree of China's Auto Industry
Study on the Engineering Project Tender Offer Game Type
Research on Innovative Performance Model of the Productive Service Industry Cluster Based on the Process of Network Innovation
Formulation and Research of Multi-Region Fire-Fighting and Rescue Operation Circle for Large Oil Strategic Reserves
The Limitation of Free Float and the Introduction of Composite Free Float in CPM Network
The Master Production Scheduling Model for Buyer and Vendor Based on Bargaining Game
A Decision Model to Estimate Contingency Budget for Complex Equipment Development Projects
The Struture Model and Empirical for the Satellite Navigation Engineering Project Risk Management
Research on the Influence Factor of the Value Chain Analysis by ICA
Steelmaking-Hot Rolling Scheduling Model and Method for Integrated Management in Iron and Steel Enterprises
Research on Intellectual Property Information Audit Based on Independent Innovation
Research on Supervision Current Situation and Countermeasures of Agricultural Modernization in China
Jointed Pricing Decision of Brick-and-Click Retailers under Uncertain Demand
Analysis on Agricultural Mechanization Sustainable Development in China
Prediction of Landfill Gas Production of Municipal Solid Waste and Energy Utilization Analysis
Transportation Safety Countermeasure Analysis on Cold-Chain Logistics of Fresh Agricultural Products
Feasibility Analysis of Mechanized Upland Rice Cultivation in Mountainous Area
「Nielsen BookData」 より