The Eighth China National Conference on Functional Materials and Applications : selected, peer reviewed papers from the Eighth China National Conference on Functional Materials and Applications (NCFMA 2013), August 23-26, 2013, Harbin, China
Author(s)
Bibliographic Information
The Eighth China National Conference on Functional Materials and Applications : selected, peer reviewed papers from the Eighth China National Conference on Functional Materials and Applications (NCFMA 2013), August 23-26, 2013, Harbin, China
（Advanced materials research, v. 873）
Trans Tech Publications, c2014
- : pbk
- Other Title
-
The 8th China National Conference on Functional Materials and Applications
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Other editors: Lixin Chen, Yu Tang, Bin Long, Zunyu Nie, Lang He and Haohua Chen
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the Eighth China National Conference on Functional Materials and Applications (NCFMA 2013), August 23-26, 2013, Harbin, China.
The 141 papers are grouped as follows:
Chapter 1: Metallic Materials and Alloys;
Chapter 2: Nanoscale Materials;
Chapter 3: Ceramic and Inorganic Functional Materials;
Chapter 4: Composite Materials, Aerospace Materials, Film Materials, Coating and Surface Technology;
Chapter 5: Environmental Functional Materials and Energy Materials;
Chapter 6: Biological, Macromolecule and Organic Functional Materials;
Chapter 7: Mechanical, Thermal, Optical, Electric, Magnetic Functional Materials and Properties.
Table of Contents
Preface and Committees
Chapter 1: Metallic Materials and Alloys
Characterization of the Hot Deformation Behavior of a Al-Si Alloy Using Processing Maps
Research on High Strength Hypoeutectic Al-Si Alloy
The Preparation and Properties Study of the Zirconia Dispersion-Strengthened Platinum Materials
Morphology and Magnetic Properties of NiCuZn Ferrite Synthesized by Solid-Molten Salt Method
Structure and Mechanical Properties of Impregnated Diamond Cutting Tools Using Cu-Based Metal Matrix
Effect of the Precipitated Second Phase during Aging on the Damping Capacity Degradation Behavior of M2052 Alloy
Microstructure and Texture Evolution Law of Ti-IF Steel for Extra Deep Drawing during Batch Annealing Process
Experimental Study on the Twin Roll Strip Casting and Warm Rolling Fe-6.5 wt. %Si Steel Sheet
Classification of High Quality Carbon Steel Based on BP Neural Network
Study on Positron Annihilation Lifetime of Amorphous Alloy Fe73.5Cu1Nb3Si13.5B9 by Magnetic Pulse Treated
Ferromagnetic Characteristics of Bulk Fe63Co7Nb4Zr6B19Si1 Metallic Glass
Effect of Microstructure of Mo-Cu Alloy on the Thermal Expansion Coefficient
Research on Effect Factors of Current Efficiency in the Process of Sponge Titanium Production by Electrolytic Method
The Study of Fine Tungsten Rhenium Thermocouple Wires in the Temperature Measurement of the Molten Steel
Application of Magnetorheological Fluid in Bulge Tests of Sheet Metal
A New Type Electrohydraulic Servo Valve Based on Magnetic Shape Memory Alloy
Atomistic Study on the Structural Properties of GdFe2-xTx (T=Ti, Al) Compounds
Frist-Principles Study of Hydrogen Atom Diffusion on Transition Metal Doped Mg(0001) Surface
Simulation Study of Dynamic Features during the Isothermal Relaxation Processes in Supercooled Liquid and Glassy Pb
Influences of Fe Doping on the Electronic Structure of Mg(0001) Surface and Hydrogenation Mechanism in Fe-Doped Mg(0001) Surface
Triple Epstein Frame First-Level Weighted Processing Method for Determining the Effective Path Length of the Epstein Frame
Chapter 2: Nanoscale Materials
Synthesis of CuO Flower-Nanostructure via the Hydrothermal Method
Thermal Decomposition Process of FeC2O4.2H2O in the Air
Influence of Atomic Defect on the Deformation Properties of Nanowires Subjected to Uniaxial Tension
Morphology Change in Cuprous Oxide Particle Synthesis with PVP: Effect of Reaction Temperature
Preparation and Characterization of -Fe2O3-ZnFe2O4 Composite Nanoparticles
The Hydrothermal Synthesis of BaTiO3 Nanotubes Arrays with Good Electrical Property
The Hydrothermal Synthesis of ZrO2 Nanoparticles and their Optical Absorption Properties
Memristive Behaviors in Ag2S Nano-Particles Assembly
Galvanostatic Deposition of PT Nanoparticles on TiO2 Nanotube Arrays for Amperometric Detection of Hydrogen Peroxide at Low Overpotentials
Fabrication of Ytterbium-Doped Titanium Dioxide Nanoparticles Using Collagen as Template
Characterization, Photoluminescence and Magnetic Properties of SiC Nanowires Synthesized with Nickel Catalyst via Microwave Heating
Controlled Synthesis LaPO4 Nanorods via a Hydrothermal Route
Growth of -Ga2O3 Nanoparticles Doped with Tin by Ni2+ Catalyzed Chemical Vapor Deposition
Preparation of Triangular Silver Nanoparticles Using Polyvinyl Pyrrolidone with Different Concentration
Non-Martensitic -Phase Formed in Sol-Gel & Reduction Method and Promoted Martensitic Transformation of Fe-Ni Nanoparticles
Mechanically Driven Alloying and Magnetic Properties in Immiscible Mn80Bi20 Nanocrystalline Powders
Chapter 3: Ceramic and Inorganic Functional Materials
Wear Conditions of Al2O3-TiC/Al2O3-TiC-CaF2 Laminated Ceramic Drawing Die Used for 45#Steel Drawing Process
Effect of External Fields on the Switching Current in (Ba0.97Ca0.03) (Zr0.18Ti0.82) O3 Ceramics
The Centrifugation Casting of Nd:YAG Ceramics Melt by Combustion Synthesis
Low Temperature Degradation of Y-TZP Ceramic for Dental Applications
Fabrication of Mullite Fiber Reinforced SiC Porous Ceramic
Temperature Comparison of External Thermal Insulation Wall Using Foam Glass under Thermal and Humidity Effect
Study on Preparation and Interlayer Ion State of Fe/Ni Pillared Motmorillonite
Effects of RbI on the Optical and Mechanical Properties of Ge23Se67Sb10 Glass
Controlled Synthesis of Cu2O Sheet-Like Particles by a Simple Solution Method
Effect of Agglomerate Powders Particle Size on Preparation of Hollow Multiphase Ceramic Microspheres by Self-Reactive Quenching Method
Sol-Gel Processing and Novel Physical Properties of PLZT 7/57/43 Ferroelectric Ceramics
The Optimization of Performance the New Type of Insulation Wall Materials Based on Waste Foam Glasses
A Formaldehyde Gas Sensor Based on Zinc Doped Lanthanum Ferrite
Effects of ZnO Addition on Response of Nio Sensing Electrode for Mixed-Potential-Type Zirconia-Based NOx Sensor
Fourier Transform Far-Infrared Reflection Spectroscopy of Ba[Zn1/3(Nb1-xTax)2/3]O3 Solid Solutions
Chapter 4: Composite Materials, Aerospace Materials, Film Materials, Coating and Surface Technology
Nanotip-Induced Ultrahigh Pressure-Sensitive Cement-Based Composite and its Pressure-Sensitive Characteristic Model
Effect of Drawing Speed on Properties of the Anti-Reflective SiO2 Film Based on Glass
Preparation of Straw Superabsorbent Composite Material by Microwave Method
Numerical Modeling of Thermal Conductivity of Diamond Particle Reinforced Aluminum Composite
Investigation on the Cutting Force of High-Speed Milling of High Volume Fraction of SiCp/Al Composites with PCD Tools
Effects of Particle Size on Microstructures and Properties of Si/Al Composites
Effect of Microwires Diameters on the Microwave Properties of Glass-Coated Microwires/Dielectric Composite
Rapid Lifetime Evaluation of Hybrid Composite Rods by Creep Behavior
Research Progress of Diamond/Al Composites
Effects of Deposit Time on Combustion Flame Deposition of Carbon Coatings on the Surface of Cemented Carbide
Experimental Studies and Computer Simulation of Permeability Determination of Porous SiC Preforms
Analysis of Moisture Distribution within Composite Materials in Hygrothermal Environment
Inhibition of Electrical Tree Initiation inside High-Voltage Cross-Linked Polyethylene Cable with Nonlinear Shielding Layer
Effect of a New Coupling Agent on Mechanical Properties of Domestic High-Modulus Carbon Fiber/Cyanate Composites
The Super Capacitor with Nanosic Film Electrode
Thin Film Thermocouples for Surface Temperature Measurement of Turbine Blade
Influence of Sputtering Power on Molybdenum-Doped Zinc Oxide Films Grown by RF Magnetron Sputtering
Effect of t-ZrO2 Content on Grinding Performance of Fused Zirconia Alumina Abrasive
Effect of Magnetic Field Treatment on Dielectric Properties of LDPE Composites with Carbon Nanotube and Nanographite
Preparation and Photocatalyst of Ce/Zn Composite Oxide
A Finite Element Solution for Frictional Sliding Contact between Hyper-Elastic and Rigid Bodies
Perfect Absorber Based on Mie Dielectric Metamaterials
Metamaterials with Zero Phase Delay
Electronic Structure Tuning and Interface Charge Transfer in Hybrid Graphene/Titania and Adatom/Graphene/Titania: First Principles Calculations
Effects of Si Spacer-Layer on the Structure of Ge/Si Quantum Dots Bilayers Grown by Ion Beam Sputtering
Dielectric Properties of Al2O3 Nanofibers/Epoxy Resin Nanocomposites
Synthesis and Characterization of Luminescent TiO2/Polymer Nanocomposites
Effect of Graphene Structure on Mechanical Properties of Graphene/Epoxy Nanocomposites
Hologram Images Patterned in Shrink BOPP Film by Large-Area Roller Nanoimprint Lithography
Ultrasonic Assisted Dynamic Inverse Emulsion: A Novel Polymerization Technique to Prepare Conductive Polyaniline/Palygorskite Composite
Failure Analysis and Research Progress of Resurfacing Welding Material of Coal Mill Roller
Chapter 5: Environmental Functional Materials and Energy Materials
Formation Mechanism and Photocatalytic Properties of Bismuth Vanadate
An Ultraviolent-Enhanced Response Solar Cell and Tunneling Effect
The Progress of V2O5/TiO2-Based Catalyst in Hg0 Removal and PCCD/Fs Decomposition
Process Study of Atomic Layer Deposition Al2O3 in Industry Application for Solar Cells
Research in Effects of Environmentally-Friendly Carbon Black Masterbatch Powder Rubber
The Day-and-Night Solar Lighting System
Anisotropic Nanostructure ZnO Photoelectrodes for CdS/CdSe Quantum Dot Sensitized Solar Cells
Study of Catalytic Pyrolysis of Chlorella with -Al2O3 Catalyst
A Green Procedure for the Ionic Liquid Catalyzed Oxidation of Benzylic Alcohols to Aldehydes or Ketones in Aqueous Media
Photocatalytic Water Splitting and Photocatalytic Degradation in Aqueous GdVO4 Suspensions under Simulated Solar Irradiation
Single Crystalline V2O5 Nanowire/Graphene Composite as Cathode Material for Lithium-Ion Batteries
Electrochemical Performance of Graphene Nanosheets as Electrode Material for Supercapacitors
TixSn1-xO3 Solid Solution Nanoparticles as Anode Material for Lithium-Ion Batteries
Growth and Characterization of 420 kg Bulk Multicrystalline Silicon (mc-Si) Ingot Grown by Directional Solidification Process for Photovoltaic Application
Preparation, Characterization and Catalytic Formaldehyde Oxidation at Room Temperature of MnOx
The Photocatalysis Properties of Heterostructured WO3-TiO2 Composite Prepared by Waste WC-TiC Hardmetal
Study on Performance of Transition Metal-Doped Catalysts for DeNOx at Low-Temperature
The Application of Electromagnetic Metamaterials for Wireless Power Transfer
Chapter 6: Biological, Macromolecule and Organic Functional Materials
Construction of Three-Dimensional Scaffold for Tissue Engineered Heart Valves
Advances in Biomaterial's Modification and Thrombosis Inhibition
Degradation Modeling Research of Biodegradable Tissue Engineering Scaffold
Post-Processing of Chitosan Based Nanofibers Prepared by Electrospinning
Effect of Sodium Alginate Content on the Properties of Chemical-Ionic Cross-Linked Hydrogel
Effect of Fiber Treatment/Starch Plasticization on Structure and Mechanical Properties of Biomass Cushion Packaging Material
Experimental Research on the Performance of PSA and other Fiber Filter
Study on Synthesis and Property of Anti-Salt Super Absorbent Resin
Efficient Production of Lactic Acid from Distillers Grains Hydrolysates by Rhizopus oryzae CICC41411
Synthesis and Crystal Structure of a Novel Ho(III) Coordination Polymer with Oxalic Acid
The Preparation and Characterization of Spherical Cellulose Aerogels with Core-Shell Structure
Synthesis of Super Absorbent Resin from Starch/Bentonite
Dielectrophoresis Response and Manipulation of Silica and its Application to Micro/Nanosensors
Chapter 7: Mechanical, Thermal, Optical, Electric, Magnetic Functional Materials and Properties
Acoustic Properties of Loose and Consolidated Nonmetal Particles from Waste Printed Circuit Boards
Research on Processing Conditions of CBS Transparent Glass-Ceramics
The Development and Application of Si-Based Quantum Dot Resonant Tunneling Diodes
Magnetically Correlated Schottky Barrier in the La1.8Ca1.2Mn2O7 Double-Layered Perovskite Ceramic
Preparation and Characterization of the Magnetic Layered Double Hydroxide Fluorescence Composite
Charge Injection in Regioregular Poly-(3-Hexythiophene) Organic Field-Effect Transistors with Different Metal Electrodes
Terahertz Magnetic Response in ReFeO3-Type Antiferromagnetism
Characterization of Luminescent LTCC Composite Materials for White LED Package
Synthesis of Water-Soluble Fluorescent Carbon Dots from a One-Step Hydrothermal Method with Potato
Transport Properties of Two-Dimensional Electron Gas in Cubic AlGaN/GaN Heterostructures
Synthesis and Luminescent Properties of Pr3+ Activated KNbO3 Phosphors by Sol-Gel Combustion Process
Effect of Surface Passivation on Optical and Electronic Properties of Ultrathin Single-Layer Silicon Nanosheets Compared to Bulk Silicon
Photoelectric Properties of the Doped Silicon with Carbon Family Elements
Advance of Ge/Si Quantum Dot Infrared Photodetector
Formation and Magnetic Properties of Metastable Fe92Bi8 Nanocrystalline Solid Solution
Double Negative Optical Metamaterial with All-Dielectric Fishnet Structure
Preparation and Characterization of Diesel Fuel-Based Magnetic Fluids
Investigation of Time Instability Factors in Ti-SbxTe Based Phase Change Memory
Preparation and Properties of CdSiO3: Mn2+, Er3+ Phosphor
Bond Mechanics and Failure Mode of Conductive Silver Adhesive for Transducer
First-Principle Study on the Photocatalystic Properties of Tungsten Doped Monoclinic BiVO4 Crystallites
The Ferroelectric Field Effect Transistor Simulation and Analysis
Critical Behavior of Gd5Si2Ge1.9Ga0.1 near the Ferromagnetic-Paramagnetic Phase Transition
Monte Carlo Analysis of Effect of Alloy Scattering on Electron Transport in Wurtzite Zn1-xMgxO
Structural Transformation Relationship for Hafnia Ferroelectric Phase
Simulation Analysis and Benchmarking Validation of Magnetic, Electromagnetic and Hybrid Shields in Large Power Transformers
The Density Functional Study of Electronic Properties for Bismuth Aluminate
by "Nielsen BookData"
