Material research and applications : selected, peer reviewed papers from the 2012 International Conference on Advanced Material and Manufacturing Science (ICAMMS 2012), December 20-21, 2012, Beijing, China

著者

• International Conference on Advanced Material and Manufacturing Science
• Li, Duanling
• Zheng, Dawei
• Shi, Jun

書誌事項

Material research and applications : selected, peer reviewed papers from the 2012 International Conference on Advanced Material and Manufacturing Science (ICAMMS 2012), December 20-21, 2012, Beijing, China

edited by Duanling Li, Dawei Zheng and Jun Shi

（Advanced materials research, v. 875-877）

Trans Tech Publications, c2014

• : [set]
• Part 1
• Part 2
• Part 3

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). Collection of selected, peer reviewed papers from the 2012 International Conference on Advanced Material and Manufacturing Science (ICAMMS 2012), December 20-21, 2012, Beijing, China. The 410 papers are grouped as follows: Chapter 1: Materials Science and Engineering; Chapter 2: Nanomaterials and Nanostructures; Chapter 3: Materials Properties, Measuring Methods and Applications; Chapter 4: Methodology of Manufacturing Analysis and Modelling; Chapter 5: Materials Manufacturing and Processing; Chapter 6: Energy Research, Energy Materials and Manufacturing; Chapter 7: Applied Mechanics, Machinery, Mechatronics, Smart and Control Systems

目次

Preface, Committees and Sponsors Chapter 1: Materials Science and Engineering Synthesis and Application of a Novel Liquid Crystal Monomer 1,4-di-[4-(3-acryloyloxyhexyloxy)benzoyloxy]-2-methyl Benzene Carrier Hopping and Relaxation in InAs/GaAs Quantum Dot Heterostructures Morphological and Magnetic Properties of Electrodeposited Ni-Ag Alloy Nanowire Arrays in Modified AAO Template Durian Peeling Extract Mediated Green Synthesis of Silver Nanoparticles Fluorescence and Judd-Ofelt Analysis of Er3+ Doped CaF2 Transparent Ceramic Preparation and Characterization of Nitrogen Doped TiO2 Nanoparticles as an Effective Catalyst in Photodegradation of Phenol under Visible Light Cu-Fe/TiO2 Photocatalyst for Deep Desulfurization Process Removal of Alkali in the Red Mud Using CO2 at Ambient Conditions Preparation and Application of Polyacrylamide-Grafted Starch Flocculant Characterization of Nanocrystalline Titania Thin Film Deposited by Spray Pyrolysis Technique Long Lasting Phosphorescence in Mn2+-Activeted ZnO-B2O3 Glass Surface Modification of Natural Rubber Film with PMMA Nanoparticles Stabilized by Chitosan or its Derivative Investigation of Mechanical Properties of Nanostructured Titanium Processed by Warm ECAP Followed Cold Rolling Experimental Test for Evaluation of SCC Static Segregation Performance of TiO2 Nanoparticles Synthesized at pH 2 as Photoelectrode in Dye Solar Cell Formaldehyde Detection Based on P3HT/InSnO Composite Thin Film Transistor Polysaccharide-Based Film of Cassia fistula and it's Antibacterial Activity The Preparation and Apply of Ni-W-P Alloy Coating for Electricity-Control Equipment Agglomeration of FePO4 Prepared by Continuous Reaction Precipitation Preparation and Characterization of Bisphenol a Polycarbonate Facilitated by Supercritical Impinging Stream Phase Composition of Starch-Gelatin Blends Studied by FTIR Study of Concrete Composite with Participation of Waste from Sewage Plants The Application of Soy Biodiesel in Bituminous Priming of Soil-Aggregate Layers of Low Traffic Volume Roads in the State of Ceara, Brazil The Optical Properties and the Structure of CuInS2 Thin Films Deposited by Oblique Angle Deposition Technique Effect of Fluorine-Containing Surfactant on Fluorinated Acrylate Emulsion Polymerization and the Properties of the Latex Film Mechanical and Microstructure Characterization of A356 (Al/SiC) MMC Preparation and Properties of Rectorite/Epoxy Nanocomposites Preparation and Characterization of Unsaturated Polyester/Organic Montmorillonite Nanocomposites Preparation of Magnetic Polymer ICF Pellet by the Electroless Plating Preparation of PPX Based Functional Tube and its Dielectric Property The Synthesis of a Polyaspartic Acid Ester and Development of the Coatings Effect of Fiber Surface Treatment on Mechanical Properties of Polylactic Acid/Empty Fruit Bunch Fiber Biocomposites Assessment of Hydration Degree of Cement in the Fly Ash-Cement Pastes Based on the Calcium Hydroxide Content Preparation and Properties of TiO2(B)/Graphene Nanocomposites as Anode Materials Fo Lithium-Ion Batteries Controlled Release of Quercus infectoria Extract from Jackfruit Starch-Konjac Glucomannan Film Intercalation and Configurations of Organic Dye Acridine Orange in a High Charge Montmorillonite Adsorptive Removal of Pb(II) Ion from Aqueous Solution Using Rice Husk-Based Activated Carbon Silica Nanoparticles from Rice Husk Ash: A Green Catalyst for the One-Pot Three-Component Synthesis of Benzo[B]Furan Derivatives Irreversible Crystal to Crystal Transformation of Nano Lead(II) Coordination Polymer by Solid State Anion-Replacement Microstructure of Porous V2O-CeO2-SiO2 Catalyst for SCR of NO with NH3 at Low Temperature Structure and Properties of (Ti,Cr)N Films by Arc Ion Plating A Study on Structure and Optical Properties of Sputtered TiO2 Films The Synthesis and Characterization of Novel Cadmium Sulphide Nanocrystallites and their Thin Films The Preparation and Optical Properties of Ag/ZnO Composite Materials Adsorptive Desulfurization of Model Gasoline on Organic - Inorganic Modified Montmorillonite Bioethanol Production from Pineapple Peel Juice Using Saccharomyces cerevisiae A Novel Plasma-Chemical Process of Metallic Layer Deposition From Small-Size Volatile Metal Complexes Synthesis of Ag/ZnO Nanocomposite with Excellent Photocatalytic Performance via a Facile Sol-Gel Method Preparation and Characterization of Micron-Sized Elastic Microspheres as a Novel Profile Control and Flooding Agent Removal of Pesticides by Organic Montmorillonite Composites Preparation and Properties of Novel Nano-Cu-Vermiculite Composite for Iodineion Extraction in the Phosphoric Acid Exchange Bias Properties in Bulk Ni45Co5Mn38Sn12 Heusler Alloy The Phase Structure and Electrochemical Properties of La4MgNi19-xCox(x=0~2) Hydrogen Storage Alloys The Phase Structure and Electrochemical Properties of La4MgNi17M2(M=Ni,Co,Mn) Hydrogen Storage Alloys Development of Epoxy Composite Filled with Micro Tungsten Disulphide Particles and its Mechanical Properties Preparation of Phosphorus Modified HZSM-5 Zeolite Catalysts and their Catalytic Performances of Methanol to Olefins Affection of Post-Nitrogen-Doping of TiO2 Nanoparticle Film Photo-Anode on Performance of Dye-Sensitized Solar Cells Preparation, Characterization and Catalytic Activity of Highly Dispersed Gold Catalyst Composition of the Middle Phase Microemulsion Formed by Sodium Dodecyl Sulfonate/1-Alcohol/n-Alkane/Water A New Route for the Synthesis of Pure Bi4(SiO4)3 Crystals by Glass Melt-Cooling Method Properties of Copper-Based Composite Reinforced with Al2O3 Particles of Different Size Local Materials for Building Houses: Laterite Valorization in Africa Chapter 2: Nanomaterials and Nanostructures Biomimetic Nanofiber Scaffolds for Tendon-to-Bone Insertion Repair Fillers in Electrical Papers for Power Transformers Application of Plasma Electrolytic Oxidation for the Formation of Magnetoactive Oxide Layes Synthesis and Characterization of Ni/Al2O3 Nanocomposite for Selective Reduction of Aliphatic Double Bond(s) Composition, Surface Structure and Catalytic Properties of Manganese- and Cobalt-Containing Oxide Layers on Titanium The Effect of CuO-Water Nanofluid and Biomaterial Wick on Loop Heat Pipe Performance Hydrothermal-Based Synthesis of CdS/ZnO Quantum Dots Carbon Nanotube Composite Sensor for Structural Health Monitoring of Bridge Structures Interference Colors of TiO2 Nanotube Arrays Grown by Anodic Oxidation Influence of Ni/B/N/TiO2 Nanocomposite Film on Hydrophilic Property of Rubber Dipping Former Surface The Properties of Nanocarbontubes Cement Mortar Incorporating Mineral Additives Solar Selective Coatings with Enhanced Thermal and Corrosion Stability: Electrochemically Deposited Black Chrome on Stainless Steel in the Presence of Graphite Encapsulated FeCo Nanoparticles Theoretical Analysis of Electrical Properties of GaAs Substrate-Nanowire P-N Junction Chapter 3: Materials Properties, Measuring Methods and Applications Rotating Electromagnetic System for Railway Track Crack Detection An Innovative Low Cost Solution for Bamboo Trusses with High-Ductility Connections Sandstone Colour Change due to the High Temperature Exposure Analysis of Seismic Vulnerability - Case of Buildings of High Seismic Hazard Stamp Forming of Polypropylene Based Polymer-Metal Laminates: The Effect of Process Parameters on Spring Back The Effect of Lubricant on Electrical Connector's Sliding Performance Research on Fretting Performance of Silver Conducting Adhesive Bed Topography Reconstruction in a Large Amplitude Meandering Flume: Application of Close Range Photogrammetry The Corrosion Status of Reinforced Concrete Structure Monitoring by Impact-Echo Method Analysis of Flexible Roller Parameters Influences on Roll Forming of Three-Dimensional Parts Using Glass Mat Thermoplastic as Automotive Bumper's Material to Enhance Pedestrian Safety Multi-Function Device for Creep Testing at Elevated Temperature The Electrically Controlled Birefringence Measurement Influence of Liquid Crystal Caused by Absorption Effect in Infrared Region Synthetic Meshes and their Interaction with Biological Tissues in Laser Exposure Experimental Studies on Fracture Properties of 30CrMnSiNi2A Steel Effect of Hemp Fibre Morphology on the Mechanical Properties of Vegetal Fibre Composite Material Slender Mixed Concrete Filled Steel Columns, in Fire Condition Measurement of Tribological Parameters Creep of the Steam Pipeline with Wall Thickness Nonuniformity The Determination of Multi-Axial Fatigue in Magnetorheological Elastomers Using Bubble Inflation Sonic Wave Band Gaps in Two-Dimensional Phononic Crystals Consisting of Hollow Mercury Columns Immersed in a Water Host, and Arranged in Simple Lattices Elasto-Plastic Analysis Using Natural Strain: Shape of Yield Surface Generated after Pre-Deformation of Large Simple Shear Identification Scheme to Assess the Role of Interfacial Damage in a Hemp-Starch Biocomposite Experimental Analysis of Petroleum Wax Characteristics for Lubricant Oil Production in Solvent Dewaxing Unit Crush Response of Polyurethane Foam-Filled Aluminium Tube Subjected to Axial Loading Roughness Evolution and Indentation Size Effect in Superficial Layers under Plane Fatigue Loading Elucidating Corrosion Performance of Weld in CO2 Corrosion Environment Hierarchical ZnO Nanostructure on Steel Substrate by Electrochemical Deposition The Structure-Phase Compositions and Mechanical Properties of Ni-Cr-Al-Based Alloy after Strong Deformation and Low-Temperature Aging Influence of Precursor Solution Concentration on Zinc Oxide Nanostructures by Hydrothermal Growth Characterization and Correction of Temperature Effects on Ru(bpy)32+ Fluorescence Films Used in Dissolved Oxygen Sensor The Application of Laser-EMAT Technique Used to Testing Defect in Rail Rheology, Deformational Properties and Fatigue of the Asphalt Mixtures Adhesion Assessment of BNT Films on Titanium Substrates Using a Scratch Test Measurement of the Speed of Sound in 2,3,3,3-Tetrafluoropropylene (R-1234yf) Liquid Phase with an Ultrasonic Sensor Eddy Current Defect Detection of Side Transverse Crack in Railhead by Integrating Experiment with Simulation Chracterizition of Dynamic Properties of Roof Bolts and their Applications RETRACTED: Correlation of the Transition Metal Compound Ternary Nitride Thin Films Observation of Tamarind Gum Solubility in Aqueous Solution from Turbidity Measurement Technique FTIR Characterisation and Conductivity Studies of Undoped and Doped Conductive Polyene From Synthesize PVC with Sustainable Epoxidised Oil Coating Resin Water Penetration Resistance of Green Concrete Incorporating with Quarry Wastes Research of Interlaminar Defects of an Elliptic Form in Elements Designs from Layered Materials DSSC-Integrated Glassblocks for the Construction of Sustainable Building Envelopes First-Principles Study Including Zero Point Energy on Hydrogen in Palladium for Hydrogen Membranes Applications The Principle of Recording Information in Distributed Environments via Suleimenov-Mun's Waves Defining Parameters of Shear Resistance on Oil Shale Samples Evolutionary Computation in Combinatorial of Machining Parameters of Reinforced PEEK Composites Using NSGA-II Experimental Studies of Creep Characters of Tunnel Lining Concrete Research on Catenary Characteristics of FAST Tie-Down Cable and its Effect on Actuator and Joint Novel Prediction Analysis Method for Error Separation of Stylus System and CMM Machine Research on the Performance of Strain Sensors Applied to Bridges Study of Tension Field Expansion on Composite Steel Plate Due to Fiber Reinforced Polymer Layer Action Analysis and Simulation of Temperature and I-V Characteristics for SiC Schottky Barrier Diodes The Technology in Sample Preparation for Transmission Electron Microscopy and Ultrastructure Observation of Lung Tissue in Rats with Experimental Silicosis Eco-Toxicological Evaluation of Fire-Fighting Foams in Small-Sized Aquatic and Semi-Aquatic Biotopes Hysteresis Analysis of High Precision PZT Actuator in Dual-Stage Hard Disk Drive Study on High Temperature Air Combustion of Hot Blast Stove Experimental Analysis of the Welded Joint Temperature Field A Novel Wild-Land Fire-Fighting Foam for Minimizing the Phytotoxicity of Wood Burning-Derived Smoke Tested in Living Plant Cells NMOS Low Boron Activation in Pre-Amorphise Silicon Study on Dust-Removing Characteristic of Carbon Fiber Membrane in Electrostatic Precipitator Gaseous and Solid Air Pollutants Formed during the Combustion of Heavy Metal Contaminated Oak and Poplar Rapid Detection and Quantification of Lanthanide Ions Using High-Speed Polymerase Chain Reactions Buckling Analysis of Advanced Grid Stiffened Composite Cylinders Application of RCW Base Dissipator on a Set of Masonry Buildings Chapter 4: Methodology of Manufacturing Analysis and Modelling Estimation of a Nusselt Correlations for Numerical Prediction of Frost Thickness Growth over a Cold Cylinder Investigating the Application of DOE Method in Designing a High-Strength and High-Performance Concrete A High Order Finite Difference/Spectral Approximations to the Time Fractional Diffusion Equations ANSYS Parametric Modeling of Honeycomb Paperboard and the Influence of Cutting Position on Mechanical Property Dislocation Self-Organization Processes in Silicon during High-Temperature Oxidization Electric and Hydrodynamic Fields Distribution in an Electrohydrodynamic Pump On an Original Approach to Model Hemp Fibers Reinforced Thermoplastics Study of Nano-Additives Influence on Physical Properties of Bentonitic Clay Analysis of Tool Wear Behavior of Single Crystal Diamond Based on FEM Simulation in Micro Turning Ultrasonic Vibration Effect in Grinding of Ceramic (Al2O3) Analysis of Flame Characteristic of Kerosene Pool Fire An LMI Approach to State Feedback H Control for Switched Singular Linear Systems Definition of a Tool Library for the Approximation of Freeform Surfaces Piezoelectric Materials: towards A Powerful Selection Tool from a Specific User Open Chart The Winding Insulation Electro-Thermal Aging Model of Electric Vehicle Motor Based on Operation States Method Preparation and Solution Algorithm for Resolving Stationary Problem of a Rod under Thermo - Stressed Condition Restrained at both Ends Affected by Heat Exchange and Heat Flows A Reconfigurable Mechanism of Cantilever Storage Racks Results Regarding Online Asset Management System for a Transformer Station Application of Vibration Based Damage Identification Techniques on Metallic Structures Numerical Data in Weakly-Dissipative KAM-Theory Finite Element Analysis of Magnetic Field of Magnetic Sealing Drive Device Generalized Formulation to Estimate a Potential Complex Function of a Flow Past Multiple Cylinders Smooth Cutting Operation Strategy for High Finishing Machining CFD Study on Flow Characteristics of BOF Gas in Evaporating Cooler Multiobjective Methodology Applied in the Gasification of Coals Mixtures for the Analysis of the Synthesis Gas Composition Comparison of Different Construction Types for Public Buildings Applying the Analytic Hierarchy Process Wave Propagation Analysis for Fluid-Filled Single-Walled Carbon Nanotubes Based on Analytically Nonlocal Euler-Bernoulli Beam Model Temperature Analysis of Disc Brake Based on Parameters Fluctuation Modeling and Simulation of Engine Power Based on MATLAB/SIMULINK Designing Safe-Life and Fail-Safe Facade Systems Kinetics Analysis of Decomposing Tributylphosphate with Non-Thermal Plasma Study for the Distributed Power Grid Faults Diagnose System Based on Mas Conceptual Modeling Methodology of Multifunction Sensors on the Basis of a Fractal Approach Simple Prediction of Tunable Metamaterial Absorbers Reflectivity Characteristics Using Equivalent Circuit Model Equal Life Design and Life Prediction of the Shaft Parts Heuristic Inventive Design Problem Solving Based on Semantic Relatedness Evolution Behaviour of Migration-Driven Growth with Catalyzed Decline An Inter-Disciplinary Approach to the Development of a Low-Consumption Prototype for the European Shell Eco-Marathon Study on Machinery Manufacturing CAD/CAM NC Machining Technology Cycle Time Design and Simulation for a Certain Kind of Automatic Production Line Micro-Rocket System of Small Object Release Process Simulation Seismic Response Analysis of the Numerical Simulation Method on Cable-Stayed Bridge Tower which Considers the Rigid Foundation Solution for Connecting Regenerative Electric Drive Systems to the Grid The Numerical Analysis of Fluid-Solid Heat Transfer on Coil Terminal Box Thermal Shield for ITER Feeder Study on the Deformations Caused by the Original Residual Stresses of Aluminum Alloy A Model for Technological Design of the Fac ade Claddings with Low Thickness Stone Elements Effect of Composite Fibers Orientations on Crack Behavior of a Thin Plate by Finite Element Method Simulation Prediction of Microscopic Interface Crack Onset in Fiber-Reinforced Composites by Using a Multi-Scale Homogenization Procedure Ab Initio Molecular Dynamics Simulations on High-Temperature Reaction Rates of Reactions KO+CO==K+CO2, KO+C=K+CO, and K2O+CO2==K2CO3 Topology Optimal Design of Heat Conductive Structure Based on Temperature Gradient Criterion Lump Energy of Cutting by Single Abrasive Grain Performance Analysis of a Multijunction Photovoltaic Cell Based on Cadmium Selenide and Cadmium Telluride Finite Element Modelling of Static and Fatigue Failure of Composite Repair System in Offshore Pipe Risers Delineation of Hydrocarbon with Variation of Overburden Thickness for Sea Bed Logging Applications Research on the Modeling of Metal Material Properties Based on Logistic Model Heat Transfer Hot-Pressing Model of Medium Density Fiberboard Research on Residual Fatigue Life Model for Lattice Boom of the Crane In-Service Simulation on Heat Transfer Performance of Directionally Solidified Porous Copper Heat Sink Numerical Analysis of the Performances of Bonded Composite Repair with Adhesive Band in Pipeline API X65 Mechanochemical Sorption Apparatuses Study on Multi-Resource and Multi-Point Emergency Scheduling Problem in Transportation Accidents for Hazardous Materials Logistics Influence of Vehicle Velocity and Wheelbase on Washboard Enhancement Coefficient Laboratory-Scale Experimental Design to Establish the Optimum Conditions for Chrome Plating Process: A Case Study A Localization Model for Snubber Machining of Precision Forging Blade Construction of Circulating Economy Development Model for New Generation Iron and Steel Plant Technological Development Orientation on Ironmaking of Contemporary Blast Furnace Analysis and Improvement on Acoustic Performance of Muffler with the Consideration of Temperature and Flow Velocity Planning and Supervising Assembly Works Using Microsoft Project Cooperative Control for Satellite Formation Reconfiguration via Cyclic Pursuit Strategy A Launching Pattern in a Mixed Model Assembly Line Technological Innovation to Optimize the Industrial Structure of Manufacturing in the Pearl River Delta Design and Simulation of a Ka-Band Pattern Reconfigurable Microstrip Patch Antenna Monitoring of the Stress State in the Boiler Drum Using Finite Element Method Optimization of Silicon Nitride Y-Branch Optical Waveguide for Evanescent Field Biosensor Three Dimensional Triangle Chaotic Micromixer Numerical Study on the Growth and Collapse of a Cavitation Bubble inside a Rigid Cylinder with a Compliant Coating The Design and Kinematics Analysis of Four-Bar Linkage of Micro-Swing Engine Analytical Modeling and Performance Study of a Cross Flow Air Dehumidifier Using Liquid Desiccant Ecological Optimization of Thermoacoustic Engine with the Characteristic Time Analysis on Failure Mechanism of Sucker Rod Pumping System Computational Fluid Dynamics Modeling of the Cold Condition Characteristic in an Entrained Flow Gasifier Classification and Properties of Modes in Bragg Fibers Fabrication of Hip and Pelvis Part for Designing Acetabular Implant by Using Fused Deposition Modeling (FDM) Machine A Probabilistic Fatigue Model for Quasi-Brittle Materials Chapter 5: Materials Manufacturing and Processing Preparation of CF Reinforced PPS/Graphite Conductive Composite for Bipolar Plate Effect of Homogenization Treatment on Microstructure and Properties of ZnAl15 Alloy Effects of Combination of 0.02 wt % Sr and Ti on the Characteristics of AC4B Alloys Produced by Low Pressure Die Casting The Exploration on Forming Processing Method by Multiple Sparks EDM Vacuum Inert Gas Atomisation of Cr-Mn-Ni Austenitic Steel Alloys Research of Joining Graphite by Use of Active Solder A Kind of Environment-Friendly Titanium Chemical Mechanical Polish Development Influence of Gravity and Mold Shape on Molding of Aluminum Foams On Line Monitoring of Quality of Friction Surfacing Kiln Process Impact of Alternative Solid Fuel Combustion in the Cement Kiln Main Burner - Mathematical Modelling and Full-Scale Experiment Effect of Nickel Sulphate to Hypophosphite Ratio on the Electroless Deposition of Ni-P Coatings on Aluminium Grain Refinement and Elimination of Hot Cracks due to Application of Electromagnetic Stirring in Commercial Aluminum Alloy Welds Improvement of Preventive Maintenance Plan for an Automatic Labeling System: A Case Study of a Carbonated Soft Drink Industry Effects of Silane Coupling Agent/Organic Bentonite on Tea Saponin Intumescent Flame-Retardant Coatings Effect of over Tempering at UHSLA Steel ARMOX 500 Refining of the Steels Significantly Improve the Quality Experimental Research on NC Electrochemical Machining of Passage between the Two Adjacent Blades of Integral Impeller Development and Application on Large Annular Shaft Kiln at Shougang The Effect of Grain Size and Cobalt Content on the Wear of Ultrafine Cemented Carbide Tools CO2 Laser Induced Blind-Via for Direct Electroplating Nanotechnology of Grained Multyligand Luminescent Materials for SSL, SC and X-Ray Sensors Composite Polymer Joining by Laser Combined Hybrid Laser Process Molecular Dynamics Studies of Cold Welding of FCC Metallic Nanowires Effect of Mineralizer Concentration on ZnO Crystals Synthesized by Hydrothermal Method A Method of Improving Accuracy of Lapping Main Cylinder of Brake-Pump High-Frequency Electromagnetic Waves for Diesel Soot Oxidation Strategy Growth and Morphology of SbSe Based Island Films Analysis of the Ductile Iron Production on the Steel Scrap Base Effect of Non-Conventional Aging Treatments on the Tensile Properties of Non-Hipped Castings of Aluminum Alloy 354 The Effect of Cutting Speed on the Machinability of 2080 Special K Steel on Vertical Machining Center Optimization of Machining Hybrid Metal Matrix Composites Using Desirability Analysis Study on Temperature Influence on Lack of Fusion Formation in Spatter/Base Metal Interface Effect of Non-Conventional Aging Treatments on the Tensile Properties and Quality Indices of Hipped Components Made of Cast Aluminum Alloy 354 The Actual State and Prospects of a High Power Electron Beam Technology for Metallic and Non-Metallic Compositions Used in Electric Contacts and Electrodes An Environmental Impact Comparison of Distributed and Centralized Manufacturing Scenarios Novel Anti-Caking Materials in Compound Fertiliezer Based on Waste Animal/Plant Oil The Synergistic Activity of the Extracts from Mango and Tamarind Gum in Cotton Fabric Finishing Rheological Property of the Regenerable Polyhydroxy Alcohol Fracturing Fluid System Nanostructured Hydrogel Dressings on Base of Crosslinked Polyvinylpyrrolidone for Biomedical Application The Effect of Atmosphere and Vacuum on Character of Weld Joints Fabricated by Explosion Friction Stir Welding of Mg and Al Alloys Investigations into the Growth of GaN Nanowires by MOCVD Using Azidotrimethylsilane as Nitrogen Source Natural Mineral for Improving Concrete Compressive Strength A New Method for the Preparation of the Copper Bonding on Alumina Substrate Resistance Spot Welding of Low Carbon Steel to Austenitic CrNi Stainless Steel Interface Microstructure in Laser Welding-Brazing of AZ31B/TC4 Dissimilar Alloys Study on the Bionic Preparation and Properties of TiO2 as Three-Dimensional Anode Materials for Lithium-Ion Batteries Effect of Treatment Process on Hardness of Al7Si-Mg-Zn Matrix Composite Reinforced with Silicon Carbide Particulate Preparation and Performance of Bubble-Type Actuator for Braille Display Formation of Super-Hydrophobic Surface by Accumulating Pollution on RTV Silicone Rubber Coating Surface Influence of Processing State on Recovery Stress in NiTiNb Shape Memory Alloy Preparation of Polymers Electrolyte Membranes for Lithium Battery from Styrofoam Waste Mo/ -Al2O3-MgO as a Bifunctional Catalyst for Renewable Hydrogen Production from Steam Reforming of Glycerol Compatibility Study of Replacement Material for Cold Cutting Machine Simple Tests and Mechanical Model for Masonry Materials at High Temperatures Influence of Ammonia Solution on Zinc Oxide Nanostructures by Hydrothermal Growth Effect of Syntesis and Frequency on Electrical Properties on Dielectric Ceramics MgCO3-TiO2 Foaming Ability of Rotomolding Polyolefin Resins Effect of Temperature on the Transformation of Carbon Black into Nanotubes Photo-Elastic Effects near the Centroid of Epoxy Specimens Raman Spectroscopic Characterization of Photonanocatalyst Aided Alkaline Pretreated Corn Stover Biomass Effect of Equal Channel Angular Pressing on Microstructure and Recrystallization Temperature of Al-Cu Alloy Preparation of Capacitor's Electrode from Coconut Shell Effect of Carbon-Coating Morphologies on the Electrochemical Performance of Natural Graphite Spheres Parametric Studies on Effect of Trailing Liquid Nitrogen Heat Sink on TIG Welding of Steels EDM Dressing Diamond Grinding Wheel and Recent Advances Solder Based Self-Assembled Structures for 3D Integration Chapter 6: Energy Research, Energy Materials and Manufacturing Lithium Iron Phosphate Intelligent SOC Prediction for Efficient Electric Vehicle Technology Forecasting of Green Energy Using Patent Analysis and Simulation Modeling Performance Analysis of Single Module Thermoelectric Generator Determination of the Effect of Wall Heating Systems on Convective Heat Transfer Coefficient in Buildings Enhanced Alkali Pretreatment of Narrow Leaves Cattail by Response Surface Methodology Thermal Cycling Effect on Mechanical Properties, Grain Size and Residual Stress in Alumina and Yttria-Stabilized Tetragonal Zirconia The Simulation of Processes and Performances within Low Enthalpy Geothermal Power Plants Control Strategy for Dual-Mode Electrical Variable Transmisson Hev during Mode Change A Study of Waste-Heat Recovery Unit for Power Transformer A Study on the Fish Pond Oxygenase System Driven by Wind Turbine Hydrogen Storage with Annular LaNi5 Metal Hydride Pellets A Fuzzy-PI Control Technique Designed for Power Control of Wind Turbine Based on Induction Generator Study on the Influence of Electrode Collocation to Electric Field Characteristic of ESP Feasibility of Using High-Intensity Ultrasound Assisted Biodiesel Production from Mixed Crude Palm Oil in Two-Step Process Numerical Simulation of Indirectly Heated Hot Water Heater The Influence of Resin Molds Fabricated with Different Forming Angle by Stereolithography on the Transmission Performance of Photonic Crystals Experimental Study on Reactivity of Limestone in FGD System Lightning Protection Research and Simulation of High-Speed Railway Catenary Design Considerations of in-Plane Nanoelectromechanical Switches with Corrugation Beams for Low Voltage Logic Applications Influence of Input Material Kind on Thermic System Furnace Efficiency Control of Grid Voltage Feed-Forward and Crowbar Circuit for DC-Bus Voltage The Comparison Study of Four Lab Scale Microalgae Collection Ways Study on Modeling and Simulating of Micro-Powers and Micro-Grid Construction 600 MW Direct Air-Cooling Unit Back-Pressure Optimization and Theoretical Analysis Thermoeconomic Optimization of a 1000MW Coal-Fired Unit Thermoeconomic Analysis of Air Conditioning Systems Study on the Energy Consumption Distribution of 1000MW USC Unit Energy Consumption Distribution Research of a 600MW Supercritical Power Plant under Various Conditions Solar Energy and Global Climate Change Simulation of a Double-Fed Induction Generator Wind Energy Conversion System under Healthy and Faulty Conditions Analysis of Influence on Urban Low Voltage Distribution Network from Charging Equipment of Electric Vehicle Thermodynamic Modeling of Allothermal Steam Gasification in a Downdraft Fixed-Bed Gasifier Information Tracking System of Liquefied Petroleum Gas Industry in Taiwan Study on Stability of Hydroelectric Generating Set Influenced by the Governor Parameters under Isolated Grid The Application of Aluminum and Hydrochloric Acid to Produce Hydrogen for Internal Combustion Engine via Hydrogen Mixture with Gasoline Based on Specific Fuel Consumption Energetic Efficiency - A New Tool, Methodology of Integrate Design for Buildings' Openings Fuzzy Logic Based Electrical Power System for Pico Satellite ERPSat-1 Discussion on Operation Modes to the Electric Vehicle Charging Station Gasification of Biomass in a Fixed Bed Reactor Theoretical Investigation of a Power Cycle Using Ammonia-Water as Working Fluid New Physical Effect Permits Factor-of-Ten Reduction in Energy Requirements for Cooling Research on the Existence of Genuine Inter-Harmonic Components Based on the Component Appearance Rate Joint Optimization of the Wind-Pumped Storage System Research on Power Flow Interface Oriented Regional Wind Power Forecasting Method Study on Underlying Coal and Strata Pressure-Relief Principle and the Gas Extraction Technique under Upper Protective Layer Mining Finite Element Method for Simulating the Effects of Torque and Drag on Buckling of Tubular inside Borehole of an Oil and Gas Wells The Numerical Calculation of the Temperature Field of Water-Wall Tube of the Supercritical Boiler under Near-Critical Condition Research on User-Side Distributed Power System Control Strategy Theoretical and Experimental Analysis of Desiccant Wheel Performance for Solar Hybrid Desiccant Air-Conditioning System A Framework for Effective Energy Management Modeling in Industry Affection of Post-Nitrogen-Doping of ZnO Columnar Films Photo-Anode on Performance of Dye-Sensitized Solar Cells Application of ZnO Nanostructure by Hydrothermal Growth in Quantum Dot Sensitized Solar Cells Dust Effect on the Performance of Photovoltaic Influence of Humidity of Water-Oil and Water-Coal Dust Fuels on their Energetic, Economic and Ecological Combustion Benefits Mathematical Modeling of the New System for Capture of Wave Energy Sensitivity of Induction Motor under Symmetrical Voltage Sags and Interruption Design of the Temperature Field Test System of Power Electronic Packaging Modules The Design of the Hybrid Energy Storage System in Hybrid Construction Machinery Research of Integrated Power Propulsion System Simulation Based on PSCAD Small Wind Turbine Power Performance Testing with Uncertainty Analysis Application of Embedded System in Energy Management System Natural Light and Building Materials Chapter 7: Applied Mechanics, Machinery, Mechatronics, Smart and Control Systems Study on Variable Structure Vibration Control for Flexible Manipulator Human Machine Interface in Weld Seam Detection Using an RGB-D Camera Development and Application of Electronic Chart System in Ocean Navigation Nonlinear Dynamics Analysis of Gear System Considering Unbalance and Loosening Faults A Dynamic Wavelet Filtering for Anterior Chamber Optical Coherence Tomographic Images Experimental Investigation of a Bridge under Traffic Loadings Robot Learning from Demonstration Using 3D Computer Vision Nonstationary Response of Optimal Controlled Stochastic Van Der Pol Oscillator A Novel Image Segmentation Enhance Technology for Motion Human Body Higher Order Sliding Mode Control for the Tracking Trajectory - The Twisting Algorithm Applied to the Vehicle Model Recognition Model Based Feature Extraction and Kernel Extreme Learning Machine for High Dimensional Data Feature Selection Approach based on Mutual Information and Partial Least Squares The Model Reference Adaptive Control of the DC Electric Drive System A New Design of Variable Traction Tracked System Monotone Constraint Model Applied to the Reliability Growth Evaluation of Electromechanical Products Magnetic Circuit Design and Analysis Used in Magnetic Sealing Drive Device Underwater Motor Sealing Based on Magnetic Force Coupling Pervasive Environment for Gases Detection and Collapses in Underground Mines Fault Diagnosis Feature Set Optimization Algorithm Based on Immunity Improved Transfer Matrix Method for the Study of Vibrations of the Centrifuges with the Basket in Console SmartModels - Contributions to Developing an Evolving Platform for Mechatronic Software Systems Random Vibration Structure Fatigue Analysis Based on Finite Element Simulation Study on the Miter Gate Fault Diagnosis Methods Based on Vibration Signals Both Side Linked Fuzzy Controlled Antennas Array Systemdevelopment for Small Satellite Application: ERP Sat_1 Compensation of the Nonlinear Effect on Anelectro Hydrostatic Cylinder Driver for the Transit and Rotating Motion Using Bilinear System Study of Vibration Characteristics of the Reciprocating Compressor on the Offshore Platform Based on Harmonic Wavelet Packet Transform Research of Thermoanalysis of Horizontal Casting Machine Supporting Parts Based on Finite Element Numerical Study of Welding with Trailing Heat Sink Considering Phase Transformation Effects Design and Development of Instrument for Measuring Torque and Shear Modulus for Material Research Design and Implementation of a Robot Based on Voice Recognition An Experimental Study on Real Time Measurement of Ultrasonic Vibration Amplitude and Frequency Using Laser Displacement Sensor A Null Constrained Weight Based on Focused Beam Forming Dynamic Simulation of Hydraulic Driving Mechanism Based on ADAMS Design and Simulation Research on Mechanical Ventilation System for Small Underground Granary Design of a High-Performance Programmable Filter Based on TLC7528 An Algorithm to Separate 1090ES ADS-B Signals A Filtering Control Method of the Gimbal Rate-Servo System in DGMSCMG Based on Strong Tracking Filter Research on Familiar Fault Diagnosis Technology to Electrical System of Auto Crane Study on Mechanical Engineering Measurement and Control Experimental Technique An Intelligent Transport System Methodology to Identify and Controlling of Faulty Vehicles Jamming Effectiveness of Noise Amplitude Modulation Signal to Pesudo-Random Code Fuze Improved Dynamic Bayesian Networks in Sea-Battlefield Situation Assessment Study on Hardware-in-the-Loop Simulation System for Navigation and Control of UUV The Modular Parallel Mechanism of Single-Driven Multi-Legged Robots Application of Electronic Nose for Detection of Wine-Aging Methods Oscillation for a Mechanical Controlled System with Time Delay Design and Simulation of K Band RF MEMS Tunable Combline Filter Single Cell Traffic of Swimming Green Paramecia on Microchips with Micro-Flow Channels Fabricated by Micro-Casting Use of Swimming Cells of Green Paramecia for Detection of Toxic Rare Earth Ions at Lethal and Sub-Lethal Concentration Absolute Pressure Sensor Based on Standard CMOS Process Determination of Synchronous Reactive Frequency Doublers EMFs Using Magnetic Field's Mathematical Simulation Numerical Simulation of the Optimum Geometry Parameters of a New Type Jet Pump A Software Tool for Automatic Identification of Dynamic Models The Integrated Control Countermeasures on Floor Heave of Broken Soft Rock with High Ground Stress Research on the Current Situation of Safety Monitoring of Tower Cranes and the Existed Problems Dynamic and Fatigue Study of the Automotive Upper Arm Suspension System Application and Integration of Control Network and Information Network

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB15598079
• ISBN:
  • 9783037859933
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 3 v. (2307 p.)
• 大きさ: 24 cm
• 親書誌ID:
  • BA24926058