EPD Congress 2014 : proceedings of symposia sponsored by the Extraction & Processing Division (EPD) of the Minerals, Metals & Materials Society (TMS) : held during the TMS2014 143rd Annual Meeting & Exhibition, February 16-20, 2014 San Diego Convention Center, San Diego, California, USA
Author(s)
Bibliographic Information
EPD Congress 2014 : proceedings of symposia sponsored by the Extraction & Processing Division (EPD) of the Minerals, Metals & Materials Society (TMS) : held during the TMS2014 143rd Annual Meeting & Exhibition, February 16-20, 2014 San Diego Convention Center, San Diego, California, USA
Minerals, Metals & Materials Society , John Wiley & Sons, c2014
- Other Title
-
TMS 2014
Available at 1 libraries
Note
Other editors: Lifeng Zhang, Antoine Allanore, Cong Wang, Jeffrey S. Spangenberger, Randolph E. Kirchain, Jerome P. Downey, Lawrence D. May
"TMS 2014 143rd Annual Meeting & Exhibition"--p.[ii]
Includes bibliographical references and indexes
Description and Table of Contents
Description
EPD Congress is an annual collection of conference proceedings that addresses extraction and processing metallurgy. The papers in this book are drawn from symposia held at the 2014 Annual Meeting of The Minerals, Metals & Materials Society. The 2014 edition includes papers from the following four symposia:
FluidizationTechnologies for the Mineral, Materials, and Energy Industries
General Recycling
Materials Processing Fundamentals
Recycling andSustainability Update
Table of Contents
EPD Council 2013-2014 xiii
EPD Honors and Awards 2014 xv
Fluidization Technologies for the Mineral, Materials, and Energy Industries
Fluidization Technologies for the Mineral, Materials, and Energy Industries Fluidised Bed Technology in Practical Examples 5
A. Krzysik
Fluidized Bed Applications for the Minerals Industry and Renewable Energy 13
M. Runkel, A. Wirtz, J. Hammerschmidt, and K. Pope
Evaluating a Fluidized-bed Process through Applied Research and Development: A Practical Approach to a Successful Project 21
L. May and H. Mudgett
Energy Efficient Fluidized Bed Systems 29
K. Adham
The Use of Pilot Scale Fluidized Beds for the Development of a Commercial Plant Design 37
J. White and A. Olson
Advanced Green Petroleum Coke Calcination in an Electrothermal Fluidized Bed Reactor 45
A. Kozlov, Y. Chudnovsky, M. Khinkis, H. Yuan, and M. Zak
Study on Phosphorus Removal of High-phosphorus Iron Ore by Microwave Carbothermic Reduction and Separation 55
S. Zhou
General Recycling
General Recycling Poster Session
Characterization of Printed Circuit Boards from Scrap Printers 67
F. Silvas, V. de Moraes, G. Bortolini, O. Gomes, S. Gaydardzhiev, D. Espinosa, and J. Tenorio
Convert Melting Slag Directly into High Basicity Glass-ceramic 75
Y. Li, X. Liu, D. Cang, and Y. Zong
Determination of Apparent Dry Density for Ternary Mixture of Crushed Marble Waste 83
C. Ribeiro, R. Rodriguez, and C. Vieira
Experimental Study on Reduction-magnetic Separation Process of Pickling Sludge 91
X. Liu, J. Zhang, Q. Xiao, and Q. Li
Indium Recovery from Discarded Light Emitting Diode (LED) Liquid Crystal Display (LCD) TV: Influence of Leaching Reagents 99
H. Hashimoto, P. Hanashiro, V. de Moraes, and D. Espinosa
Kinetic Study of Acid Copper Leaching from Waste Printed Circuit Board 105
F. Ramunno, V. de Moraes, D. Espinosa, and J. Tenorio
Life Cycle Based Greenhouse Gas Footprints of Metal Production with Recycling Scenarios 113
N. Haque, T. Norgate, and S. Northey
Optimal Leaching on Hydrometallurgical Process of Recycling Batteries Using Less Energy and Reactants 121
F. Bertin, R. Pereira, D. Espinosa, and J. Tenorio
Production of Ornamental Compound Marble with Marble Waste and Unsaturated Polyester 129
C. Ribeiro, R. Rodriguez, and C. Vieira
Removal of Heavy Metals and Upgrading Crude Bio-oil from Pteris Vittata Stems and Leaves Harvest Using Hydrothermal Upgrading Process 137
J. Yang, Z. Deng, J. Li, and X. Zhang
Research on the Fundamental Characteristic of Dust and Sludge Containing Iron from Steel Enterprise 151
R. Mao, J. Zhang, X. Xu, M. Wei, and K. Jiao
Silver Recovery from Industrial Wastes Using an Electrochemical Reactor REOV-01 159
P. Ortega, J. Islas, L. Lechuga, and L. Garcia
Study of Degradation of Ceramic Bodies Incorporated with Ornamental Rock Waste Obtained from Test of Wetting and Drying Cycles 167
G. Xavier, J. Alexandre, F. Saboya, P. Maia, and A. Azevedo
The Effect of Ethanol Concentration for the Separation of ABS and HIPS From Waste Electrical and Electronic Equipment (WEEE) by Flotation Technique 173
S. Utimura, J. Tenorio, and D. Espinosa
Materials Processing Fundamentals
Thermodynamic
Thermodynamic Properties of Equilibrium Phases in the Ag-Cu-S System Below 500 K: Experimental Study 185
F. Tesfaye and P. Taskinen
Iron-carbon Phase Diagram: A Century at Variance with Chemical Thermodynamics 195
H. Nafe
Effect of Water on S and P Distribution between Liquid Fe and MgO-saturated Slag Relevant to a Flash Ironmaking Technology 203
M. Mohassab-Ahmed and H. Sohn
Numerical Analysis of Thermo-mechanical Behavior of Laser Cladding Process 211
T. Tang and S. Felicelli
Process & Properties Control
Effect of Different Parameters on Breakouts in Billet Caster 221
R. Singh, Devilal, S. Jha, S. Shekhar, E. Chacko, and R. Sahu
Metal Extraction
A Sintering Ore Blending Optimization Model Based on ?Iron Increase and Silicon Reduction? Ore Dressing Processes 233
C. Liu, J. Li, H. Tang, and W. Liu
Electrodeposition of Cobalt from Air and Water-stable Ionic Liquid 1-Butyl-3-Methylimidazolium Tetrafluoroborate 241
M. Li, Z. Wang, and R. Reddy
Effects of Ultrasound on Al2O3 Extraction Rate during Acid Leaching Process of Coal Fly Ash 251
K. Liu, J. Xue, and W. Luo
Separation of Nickel and Cobalt in Acidic Aqueous Solution by Selective Reduction of Metals259
S. Shiryama and T. Uda
TWIP / Steelmaking
Formation of Non-metallic Inclusions in the Molten Steel in MgO Crucibles 269
W. Yang, L. Zhang, H. Duan, Y. Ren, J. Wang, and X. Liu
Experimental Research of Continuous Temperature Measurement for Molten Metal Bath through Bottom-blowing Component 277
Y. Ren, S. Niu, W. Li, and X. Hong
AlN Formation in High-Al and High-Mn Alloyed Advanced High Strength Steels 285
J. Jang, D. Kim, M. Paek, and J. Pak
Interfacial Reactions between Slag and Melt in the New World of High Manganese Steels 291
M. Peymandar, S. Schmuck, P. von Schweinichen, and D. Senk
Poster Session
Computational Study of Texture Development during Templated Grain Growth 301
J. Zhou and Y. Wang
Dissolution Behavior of Magnesia in Hydrochloric Acid with Strong Brine 309
Z. Hu, W. Ding, D. Tan, and S. Guo
Distribution of P2O5 between Solid Solution and Liquid Phases in CaO-SiO2-Fe2O3 System Containing Na2O or B2O3 317
S. Xie, L. Zhou, and W. Wang
Effect of M-EMS on the Macroscopic Quality of TP347 Heat-resistant Stainless Steel Billet 325
S. Zhou
Effect of Mn, Ni Contents on Microstructure and Rust Layer of Bridge Weathering Steels under Atmosphere Containing Cl-1 331
G. Fu, D. Jin, X. Gao, Q. Li, and M. Zhu
Effects of Niobium Alloying on the Microstructure and Mechanical Properties of Bainite Ductile Iron 339
L. Chang, Y. Yan, X. Chen, Q. Hua, and Q. Zhai
Effects of Solidification Conditions on As-cast Structure of Ferritic Stainless Steel in Continuous Casting 345
J. Sun, J. Ye, H. Zhong, W. Du, and Q. Zhai
Electrowinning of Silicon with Liquid Electrodes 353
M. Jia, Y. Cheng, Z. Tian, Y. Lai, and Y. Liu
Experimental Study on the Influence of Vacuum Carbonitriding Process for 20Cr2Ni4A Steel 361
Y. Zhang, S. Du, W. Zhao, G. Wang, and Y. Rong
Hybrid Porous Metal of Nano-micro Double Size and Regular-random Bimodal 367
X. Zhang, H. Zhang, and Y. Li
Hydraulic Simulation of Fluid Flow in Beam Blank Continuous Casting Mold with Double Nozzles 375
L. Zhang, D. Chen, M. Long, X. Xie, X. Zhang, and Y. Ma
Isothermal Bainite Transformation of Cr5 Steel under Pulsed Current and Pulsed Magnetic Field Treatment 385
X. Xia, L. Li, Z. Lu, Q. Zhai, and Q. Li
Microstructural Characterization of Aluminum Metal Matrix Composite Prepared by In-situ Method 393
D. Mitrica, M. Burada, R. Florea, M. Ghita, E. Alexandrescu, V. Soare, and P. Moldovan
Microstructure Modification for Semisolid Slurry of Al-4.5wt.%Cu Alloy by Pulse Magneto-oscillation Treatment 401
Z. Xu, Z. Zhang, Q. Li, Q. Zhai, and Y. Gong
Modeling of Magnetohydrodynamic, Thermal and Solidified Behavior in Electroslag Remelting Process 409
Q. Wang, Z. He, and B. Li
Phase Composition of Scale Layer Formed during Continuous Casting 417
N. Wang, J. Dong, B. Li, M. Chen, and C. Huang
Properties of Cu-based Oxygen Carrier Used in Chemical Looping Air Separation (CLAS) 423
K. Wang, Q. Yu, Q. Qin, and W. Duan
Removing Fluorite and Calcite from Scheelite during Flotation Separation Process with Calcium- and Sodium-containing Reagents 431
L. Liu, J. Xue, and J. Zhu
Simulation of Solidification Microstructure in Austenitic Stainless Steel Twin-roll Strip Casting Based on CAFE Model 441
J. Ma, J. Zhang, B. Wang, J. Zhao, S. Zhao, and G. Wu
Simulation of Solidification Process of Steel Ingot under Different Thermal Boundary Conditions 449
J. Zhao, J. Zhang, B. Wang, Z. Chen, and J. Ma
Statistical Estimation of Dislocation Pinning at Precipitates, Voids and Bubbles 457
A. Dutta, M. Bhattacharya, and P. Barat
The Effect of Cooling Intensity on the Solidification Structure and Ferrite Phase Fraction of a Duplex Stainless Steel 463
C. Zhang, J. Ye, C. Wu, J. Hu, H. Zhong, and Q. Zhai
Study on the Purification of Nickel by Vacuum Directional Solidification 471
G. Wang, K. Wei, W. Ma, W. Yu, and C. Zhang
Synthesis of Titanium Dioxide by Microwave Solid State Method and Its Photocatalytic Property 481
K. Yang, J. Peng, L. Zhang, H. Zhu, Y. Xia, and J. Jia
The Solidification Structure and Ferrite to Austenite Transformation of a Novel Lean Duplex Stainless Steel 487
J. Ye, C. Zhang, C. Wu, H. Zhong, H. Song, X. Cao, and Q. Zhai
The Study of Refinement Mechanism of Pure Aluminum under Surface Pulsed Magneto Oscillation 495
Z. Zhang, Z. Xu, Q. Li, D. Liang, and Q. Zhai
Thermal and Metallographic Parameters Evolution during Solidification of Zn-Sn Alloys 501
W. Desrosin, C. Schvezov, and A. Ares
Thermodynamic Relation between Chromium and Sulfur in Fe-Cr Melts 509
H. Do, Y. Kim, D. Kim, and J. Pak
Recycling and Sustainability Update
Recycling
Challenges to the Biotechnological Recycling of Precious and Rare Metals Sourced from Post-consumer Products 521
N. Saitoh and Y. Konishi
Sustainable Recycling of Solid Wastes via In-process Separation 529
N. Ma
Recovery of Valuable Metals from Lead Flue Dust by a Integrated Process 537
X. Yang, H. Li, C. Li, and Y. Wang
Recycling of Valuable Metals from Poly Cracker Ash of Printed Circuit Boards (PCBS) by Physical Beneficiation and Hydrometallurgical Treatment 545
V. Kumar, A. Kumari, M. Jha, A. Vidyadhar, and B. Soni
Waste
Characterization of Components of Liquid Crystal Displays: The End-of-Life Management 555
T. Moreno, P. de Hanashiro, H. Hashimoto, V. de Moraes, and D. Espinosa
Kinetics and Equilibrium Studies for the Removal of Tannin Acid from Aqueous Solutions by Regenerated Activated Carbon 563
A. Ma, L. Zhang, J. Peng, H. Xia, C. Sun, Y. Luo, T. Hu, and Y. Zuo
Recovery of Copper and 1, Hydroxyethane-1, 1-Diphosphonic Acid (HEDP) from Cyanide-free Electroplating Wasterwater by Electrodialysis 571
T. Scarazzato, D. Buzzi, A. Bernardes, J. Tenorio, and D. Espinosa
The Life Cycle Assessment of Copper Metallurgical Process 579
X. Yang, X. Hao, H. Li, and S. Sun
Zinc Oxide Preparation Using Rotary Hearth Furnace Secondary Dust 587
H. Tang, H. Zhang, L. Fan, and Z. Guo
The Estimation of Waste Packaging Containers Generated by Households in Taiwan 595
E. Hsu and C. Kuo
Author Index 603
Subject Index 607
by "Nielsen BookData"