Chemical, material and metallurgical engineering III : selected, peer reviewed papers from the 2013 3rd International Conference on Chemical, Metallurgical Engineering (ICCMME 2013), December 10-11, 2013, Zhuhai, China
Author(s)
Bibliographic Information
Chemical, material and metallurgical engineering III : selected, peer reviewed papers from the 2013 3rd International Conference on Chemical, Metallurgical Engineering (ICCMME 2013), December 10-11, 2013, Zhuhai, China
（Advanced materials research, v. 881-883）
Trans Tech Publications, c2014
- : [set]
- Part 1
- Part 2
- Part 3
Available at / 1 libraries
-
Part 1A25118/881-1400067953,
Part 2A25118/881-2400067961, Part 3A25118/881-340006797X -
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the 2013 3rd International Conference on Chemical, Metallurgical Engineering (ICCMME 2013), December 10-11, 2013, Zhuhai, China. The 375 papers are grouped as follows:
Chapter 1: Chemical Materials and Technologies;
Chapter 2: Catalyst and Catalytic Reaction;
Chapter 3: Pharmaceutical Engineering, Biological Chemical and Biomedical;
Chapter 4: Waste Disposal and Environmental Chemicals;
Chapter 5: Chemical Thermodynamics and Kinetics;
Chapter 6: Food Science and Food Chemistry;
Chapter 7: Composites and Polymers;
Chapter 8: Micro / Nano Materials;
Chapter 9: Ceramic;
Chapter 10: Functional Materials;
Chapter 11: Environmental Friendly Materials;
Chapter 12: Building Materials;
Chapter 13: Iron, Steel and Alloys;
Chapter 14: Materials Processing Technology;
Chapter 15: Metallurgical Science and Technology;
Chapter 16: Exploration and Extraction of Mineral Resources, Mining Engineering;
Chapter 17: Measurements and Modeling in Material Science
Table of Contents
Preface and Conference Organization
Chapter 1: Chemical Materials and Technologies
Strategy in Optimization of Silicone Oil Emulsion by D-Optimal Mixture Design
Wood Smoke Impact on Particulate Matter (PM)
Quantitative Analysis of Sn-2 Palmitic Acid Content in the Triacylglycerols from Algae Oil Using Enzymatic Hydrolysis
Rapid Analysis of the Bisphenol a in Slips of Store Receipts and ATM Machine with Head-Space Liquid-Phase Micro-Extraction Coupled to Gas Chromatography and Mass Spectrometry
Chemical Constituents and Antibacterial Activity of Euphorbia altotibetica
Screening of Formulation for 5% Hexaflumuron Suspension Concentrates
Optimization of Furfural Production from Xylose by RSM Using Chromium Sulfate as Catalyst
Lipase-Catalyzed Synthesis of Sucrose Fatty Acid Ester and the Mechanism of Ultrasonic Promoting Esterification Reaction in Non-Aqueous Media
Analysis on the Main Problems of Industrial Application of the Regenerated Amine Desulphurization Technology
Effects of Strong-Acid on Performances of Copper Solvent Extraction
Visual Study on the Effect of Osmotic Pressure on the Morphology of Emulsion Liquid Membrane
Stereo-Controlled Total Synthesis of Ieodomycins A and B
Optimization of HS-SPME for GC-MS Analysis of Volatiles Compounds in Roasted Sesame Oil
The Resonance Rayleigh Scattering Spectrum Characteristic of Tb3+-GMFX-AR and the Determination of Gemifloxacin
Preparation and Research Advance of Electronic Grade Phosphoric Acid
Study on Synthesis of Complexes of Maleamic Acid and Lanthanum Ion
Study on Liquor Wastewater Treated Process by Domesticated Activated Sludge to Produce Polyhydroxyalkonoates
Formation the Polypyrrole / Chitosan / Polylactic Acid Microencapsules
Growth Characteristics of Hydride for Aging Treated U-5.5wt.%Nb Alloy
Determination of 17 -Estradiol Based on Electropolymerized-Molecularly Imprinted Polymer on Gold Nanoparticles-Graphene Modified Electrode
Preparation of Iron Carbide from High Phosphorus Oolitic Hematite
The Study of Composite Substituting Mercury Corrosion Inhibitors for Zinc in Zinc-Manganese Battery
Thermodynamic and Experimental Studies of Chlorination Reaction of FeO-Cu2O System
Enhancement of Carbon Dioxide Mass Transfer Rate by (Ionic Liquid)-in-Water Emulsion
Effect of Hydrogen Bonds to Form Complexes for N Active Structures which Contained in Coal and the Ca-Based Inhibitor
Dyeing Technology of Real Silk with the Natural Curcumine
Preparation and Property of a Bio-Char from De-Watered Sludge and Beer Lees
A New Type of Fluid Loss Additive P1301 for Oil Field Cementing
Epoxidation of Soybean Oil under Acid-Free Condition
Preparation of Manganese Dioxide Loaded Active Carbon and its Adsorption Dynamic
Progress on Synthesis and Application of Betaine Surfactants
Enantioselective Reformatsky Reaction between Cinnamaldehyde and Diflurinated Organozinc Reagent: Synthesis of Chiral , -difluoro- -hydroxy Esters as Precursors of Statin Analogues
Electrocatalytic Sensing of Nitrate at Cu Nanosheets Electrodeposited on WO3/Polyaniline Modified Electrode
Synthesis and Properties of Poly (N-arylenebenzimidazole ketone)s
Electrochemiluminescence Detection of Diphenhydramine Based on Tris(2,2-bipyridyl) Ruthenium(II) Immobilized on PEDOT-PSS Modified Electrode by Electrostatic Attraction Strategy
The Quantum Research on the Nucleophilic Reaction Activity of Polycyclic Aromatic Hydrocarbons
Hydrothermal Synthesis and Photocatalytic Activities of La-Doped BiVO4 Microcakes
Synthesis, Crystal Structure and Fluorescence Study of 8-Dimethylaminomethyl-7-hydroxy-chromen-2-one1
Density Functional (B3LYP)and the Second-Order Moller-Plesset (MP2) Theoretical Method Investigate the Geometric Configurations of the D...CO (D=He, Ne, Ar, Kr and Xe) Complexes
X*F (X=C, N, O and S) Noncovalent Weak Intermolecular Interactions
The Research for Introducing Gem-Difluoromethylene Group into the Organic Molecules
Synthesis, Characterization and Photophysical Properties of CuI Complexe with 7,10-Dimethyl Pyrazino [2,3-f][1,10]phenanthroline
Synthesis and Crystal Structure of Tridodecylammonium 3,5-Dinitro-1, 2, 4-1H-triazolate (TDADNT)
Hydrothermal Time Effecting on the Morphology of Hydroxyapatite Templated by L-DOPA
The Stability of Potassium Ferrate in Water
Determination of Phoxim in Water Sample by Hollow Fiber Supported Ionic Liquid Coupled with High Performance Liquid Chromatography
Overloading Behavior of Anthracyclines on Silica Column with Aqueous-Organic Mobile Phases: Effect of Organic Modifier
Investigation of Sulfur Transformation during Coking Process
Research on Production and Pyrophorisity of Iron Sulfur Compounds in Liquid Phase
Chapter 2: Catalyst and Catalytic Reaction
The Catalyzed Synthesis of Prenyl Alcohol in Anhydrous System
Preparation of TiO2-Al2O3 Support and Hydrodenitrogenation over Ni2P/TiO2-Al2O3 Catalyst
Study of the Performance of the Cobalt Based Catalyst on Different Supports for Fischer-Tropsch Synthesis
Photocatalytic Performance of ZnO Prepared by Sol-Gel Method with the Assistance of CTAB
Design and Synthesis a Novel Supported Pd-Pt Mesoporous Composite as Catalysts for the Polyaromatic Hydrogenation
Effective Hydrogenation of p-Chloronitrobenzene over Iridium Nanoparticles Entrapped in Aluminum Oxy-Hydroxide under Mild Conditions
Reactivity of Olefins and Thiophenes in Hydrodesulfurization of FCC Gasoline
The Bimetallic Synergistic Effect in Heterogeneous UV/Fenton System for the Treatment of Refractory 6-Nitryl Wastewater
The Influence of Preparation Procedures on Hydrogenation CO2 to Formic Acid over Supported Ru Catalysts
Ammoximation of Cyclohexanone over Shaped TS-1 Zeolite Catalysts
Synthesis and Characterization of Metal Salen Complexes Immobilized MCM-41 and their Catalytic Activity for Benzyl Alcohol Oxidation
The Preparation and Characterization of the Solid Acid Catalyst for the Esterification of the Gutter Oil
Efficient Catalytic Hydrodechlorination of 4-chlorophenol in Water over Rh/AlO(OH) Catalyst
The Recovery of Sulfur Resource during Regeneration Process for the Hot Gas Desulfurization Sorbent
Research on the Phenol Degradation in Microbial Fuel Cells with Fe3O4-Reduced Graphene Oxide Cathodic Catalyst
Efficient Hydrogen Production by Catalytic Dehydrogenation of Methylcyclohexane over Ni-Pt/ Nano-Film Alumina Catalyst
Simulation of Sulfolane Extraction Distillation Process
Chapter 3: Pharmaceutical Engineering, Biological Chemical and Biomedical
Recombinant Expression of Bioactive Peptides: A Review
Application of a Bioinformatics Method on Detecting of Acinetobacter baumannii Carrying Metallo- -Lactamases Isolated from Inpatients
Saponins from Panax japonicas Reduces Myocardial Infarction Induced Reactive Oxygen Species Production and Cardiomyocyte Apoptosis via Activation of the Nrf-2 Pathway
Extraction Process Optimization of Endo-Polysaccharides from Phellinus igniarius
Synthesis of Esomeprazole through Asymmetric Oxidation
Dihydro Flavonols Maybe an Effective and Specific Novel Treatment for Alcoholism by Affecting the Express of Aminobutyric Acid
Radiation Threshold Damageability of Cells Depending on the Availability of the Cell Nucleus
Development of Dencichine Plus Yunnan Baiyao Band-Aid
Desirability Approach for the Optimization of Black Pepper Extract and Chitosan Fresh-Keeping Solution Proportion Coating on Tilapia
Research on Preparation Process of 5% Hexaflumuron Suspension Concentrates
Study on Antioxidant Activity of Pigment in Black Soybean Peel
Synthesis and Characterization of S-Tenatoprazole
Three-Dimensional Protein Structure Prediction for CD36
The Use of PEI in the Targeted Gene Delivery of VEGF165 and Ang-1
Synthesis Podophyllotoxin Derivatives via "Click Chemistry"
Synthesis of Bicyclic Furo[2,3-d]pyrimidine Deoxynucleosides Conjugated with N-Diisopropylphosphoryl Amino Acids
A Trial on the Overexpression of Epidermal Growth Factor Receptor and Proliferating Cell Nuclear Antigen in NSCLC of Similar Differentiation
Glycoconjugation of 4-Methylumbelliferone via "Click Chemistry"
Chemical Constituents from Gentiana algida Pall
Synthetic Study towards (+/-)Ieodomycin A
Anti-Fatigue Effects of Polysaccharides from Gynostemma pentaphyllum Makino by Forced Swimming Test
The Synthesis of (1-oxaspiro[2.5]octan-2-ylmethoxy)(tert-Butyl) Dimethylsilane
Synthesis of (R)-3-((4-methoxybenzyl)oxy)butanal
Study on Synthesis of (R)-tert-butyl (1-hydroxybut-3-yn-2-yl)carbamate
Alkaloids from Penicillium oxalicum, a Fungus Residing in Acrida cinerea
Facile Synthesis, Characterization and Anti-Inflammatory Effect of 3-Aminoindolizine Derivatives
Study on the Making of Amphiphilic Triblock Copolymer as Blood Substitutes
Comparative Analysis of Compositions between Calcium Phosphate Calculi and Urinary Crystallites in the Stone-Formers
A Prophase Study on the Concise Synthesis of Aculeatin A
Synthesis of (R)-2-(1-hydroxycyclohexyl)-2-(4-methoxyphenyl)ethyl 4-Methylbenzenesulfonate
Clinicopathological Significance of HO-1 and HO-2 Expression in Medulloblastoma
Production of Personalized Thyroid Cartilage Scaffold and Histological Analysis
Spectrophotometric Determination of 6-Mercaptopurine in Pharmaceutical Sample Using Fe(III)-Potassium Ferricyanide System
Evaluation of In Vitro Antibacterial Activity of Endophytic Fungus from Anemone tomentosa
Isolation of Endophytic Fungi from Ephedra intermedia and Research Antibacterial Activity of Secondary Metabolite Produced by the Fungi
Determination of Vitamin and Aminophylline by a Method of PLS
Well-Established Biodegradation Tests Used Biogenously Evolved Carbon Dioxide as an Analytical Parameter to Determine the Ultimate Biodegradability of Metalworking Fluids Measured by the Change of Absorption Solution Conductivity
Fabrication of Paper-Based Microfluidics by Single-Step Wax Printing for Portable Multianalyte Bioassays
Research on Simulation of Complex Distillation System for Biomass Fuel Ethanol Based on Virtual Assembly
Chapter 4: Waste Disposal and Environmental Chemicals
The Removal of Strontium(II) and Neodymium(III) from their Aqueous Solutions on Chrysotile Nanotubes
Study on Reactive Dye Wastewater Treatment with Quaternary Chitosan
Using Lix984 to Recover Cu2+ from Plating Wastewater Containing Chloride
Study on Photocatalytic Properties of Graphene/TiO2 Composite Prepared by Impregnation Method
Effect and Circulating of IC Reactor Treating Straw-Washing Wastewater
Source of SO2 in Exhaust Gas from Carbon Production and Baking Process
Study on the Recovery of Waste Wool by Combining Reduction and Metallic Salt Methods
Investigation on the Purification Efficiency of Rainwater by Green Land
Research on MSW (Municipal Solid Waste) Gasification by CFB (Circulating Flue Bed)
Study on Treatment of Smelting Contaminated Acid by Evaporation Condensing Process
Adsorption of Heavy Metal Ions from Aqueous Solution by Chitosan
Thermodynamics of the Vitrified Bottom Ash Slag from Municipal Solid Waste Incinerators-Phase Relations of CaO-SiO2-Na2O Oxide System
Preparation and Characterization of Activated Carbon from Reedy Grass Leaves by Chemical Activation with KOH
The Effects of Different Adsorbents from Orange Peel on the Pesticide Furadan
Thermal Debromination of Waste Printed Circuit Boards by Iron-Based Catalyst
Determination of Parathion in Water Sample Using Ionic Liquid Head Space Microextraction Followed by HPLC
Study on Advanced Pretreatment of Seawater by Electrolysis
Preparation and Performance Research of the Environment-Friendly Corrosion and Scale Inhibitor
Carbon Balance in Nanjing's Ecological Economic System
A Water-Soluble Iron Porphyrin as a Highly Efficient and Recyclable Catalyst for Peroxynitrite Decomposition
Chapter 4: Waste Disposal and Environmental Chemicals
Determination of Acrylates in Wastewater by Dispersive Liquid-Liquid Microextraction Coupled to Capillary Gas Chromatography
Determination of Aromatic Amines in Wastewater by Dispersive Liquid-Liquid Microextraction Coupled to Capillary Gas Chromatography
Study on Cold Flow Properties of Waste Cooking Methyl Ester
Simultaneous Desulfurization and Denitrification from Flue Gas Using Urea/Piperazine Solution
CO2 Capturing by MDEA-PZ-TETA in a Rotating Packed Bed
The Calculation Methods of the Heat Balance for Recovering the Vaporous Water from Exhaust Gas in Ammonium Phosphate Production
Simulation and Analysis of Cryogenic Air Separation Process with LNG Cold Energy Utilization
Review of Treatment Methods for Fracturing Flowback Fluid
Comprehensive Utilization of Red Mud Remaining in Alumina Production
Extraction of Valuable Metals from Red Mud
Study on Extraction of Mg from Boron Mud
Chapter 5: Chemical Thermodynamics and Kinetics
Extraction Kinetics and Mechanism of La(III) by P204-Kerosine from Phosphoric Acid
Study on the Salt Precipitation Law of La Guocuo Salt Lake Brine with Pretreatment at 5 DegreesC
Experiment and Numerical Simulation on Slugging Fluidization of Large Particles in Gas-Solid Fluidized Bed
A New Modeling Approach to Estimate the Concentration of Tibolone in Acetone Solvent through Raman Spectra
Feasibility Analysis of Electrodeposited Cu-W-Co Alloys
Crystallization Kinetics of CaOx in Artificial Urine and in Saline System
Solid-Liquid Equilibria for Binary Mixture of Dichlorophenols
Nonlinear Analysis of Bubble Formation Dynamics in Shear-Thinning Fluids
Transition of Bubbly to Slug Flow in a Short Vertical Channel of Gas-Liquid Two-Phase Flow
Decomposition Kinetics of Switchgrass: Estimating Activation Energy
Spontaneous Formation of DTAB/SLS Vesicles
Chapter 6: Food Science and Food Chemistry
Ethanol Extract of Julu Honeysuckle May be a Potentially Promising Preservative Material
Isolation and Screening of Salt-Tolerance Lactic Acid Bacteria Strain and Study on its Characteristic Producing Lactic Acid
Effect of Poly- -Lysine on Vacuum Packed Tilapia Stored at 4 DegreesC
Effect of Catfish Bone Paste on the Properties of Steamed Bread
The Change Rules of Physiochemical Indexes of Luzhou-Flavor Daqu Based on Continuous Flow Chemical Analyzer
Functional Properties of the Protein Isolate and Major Fractions of Pine Nut Proteins Prepared from the Changbai Mountain in China
Extraction, Purification and Partial Characterizations of Polysaccharides from Gracilaria lemaneiformis
Study on Extraction and Detection of -Androstenol in Truffle
Effect of Packaging Films on Quality of Fresh-Cut Broccoli
Optimization of Fermentation Conditions of Mead by Response Surface Methodology
Optimization for Acid Hydrolysis Conditions of the Simulated Last Monosodium Glutamate Mother Liquor by Response Surface Methodology
Effects of Soybean Pectin Gel on Flavor Compounds Variation of Cheddar Cheeses during Ripening
Optimization of Culture Conditions ,Separation and Purification of a Lipopeptide Biosurfactant from Pseudomonas palleronii S6X
Study on Separation of 11S and 7S Fractions from Soy Protein by Different Techniques
Isolation and Purification of Soybean Antioxidant Peptides
Effects of Pine Nut (Pinus koraiensis) Meal Protein Peptides on Memory Function of Mice
Effects of Pine Nut (Pinus koraiensis) Meal Protein Peptides on Thymus Coefficient and Transformation of the Splenic Lymphocyte of Mice
Study on Method of Extraction and Determination of Cucurbitin
ICP-AES Determination of Mineral Elements in Five Edible Seeds after Microwave Assisted Digestion
Study on Pit Mud Lixivium from Different Years Pits by Gas Chromatography Mass Spectrometry
Chapter 7: Composites and Polymers
The Application of a New Composite Elastomer Material in Rubber Tracks
Polyurethane Foaming Process Modelling by Finite Point Method
Preparation of an Amphiphilic Magnetic Copolymer Microspheres
Study on Thermal and Mechanical Properties of Polyurethane Systems for In-Mould Decoration Ink
Progress in the Synthesis of Ternary Carbide by Carbothermal Reduction from Natural Raw Material
Preparation of Waterbased Phenol-Formaldehyde Resin and its Application on Para-Aramid Paper
Synergistic Effects of Nanoporous Nickel Phosphates VSB-1 on Intumescent Flame Retardant Polypropylene Composites
Microstructure Characteristics and Mechanical Properties of In Situ TiB/Ti Composites Prepared by Arc-Melting Technique
Alignment and Surface Modification of Multiwall Carbon Nanotubes Polymeric Composites
Study on Interfacial Bonding Strength of SiO2/PET Composite Packaging Film
Effect of Thermal Finishing on the Mechanical Properties of Hollow Polyester Fiber
Facile Fabrication and Enhanced Photoluminescence Property of Zn(II) Coordination Polymers with 2,2'-biquinoline-4,4'-dicarboxylic Acid
Effects of MPBM on Crosslinking Density and Mechanical Properties of Tetrafluoroethylene-Propylene Copolymer
Study on Photocatalytic Degradation Performance of Nano Carbon Load WO3 Doping TiO2 Composites
Cure Monitoring of Epoxy Resin by Simultaneous DSC/FTIR
Fabrication of the ZnS-ZnO Composite Film by Sulfurizing the as-Electrodeposited ZnO Film
Investigate of Phase Compositions and Microstructure of MgO-C through In Situ Nitride
Determination of Free Polyethylene Glycol in Cross-Linked Sodium Hyaluronate Gel
Efffect of Spark Plasma Sintering Temperature on Mechanical Properties of In Situ TiB/Ti Composites
The Research of Nafion/PTFE/Inorganic Composite Membrane Used in Direct Methanol Fuel Cell
Chapter 8: Micro / Nano Materials
Preparation of Nano t-ZrO2 Particle by the Integrated Process of High-Gravity Field and Hydrothermal Crystallization
Effect of Polyvinylpyrrolidone on the Preparation of Silver Nanowires
Fabrication of Gold Nanoflowers and the Surface Enhanced Raman Scattering Performance
Research Progress of Nanometer Titanium Dioxide Application
Fabrication of Raspberry-Like Gold Nanoparticles and their Applications in Surface-Enhanced Raman Spectroscopy and Catalysis
Comparative Study about Cytotoxicity with CuO Engineered Nanoparticles, TiO2 Engineered Nanoparticles, CeO2 Engineered Nanoparticles, Single-Walled Carbon Nanotubes
Preparation of Tungsten-Doped VO2 (M) Nanoparticles through Sol-Gel Method and Hydrothermal Synthesis
Characterization and Synthesis of Additive Coated BaTiO3 Nano-Powder
Facile Preparation of Cu(OH)2@TiO2 Nanowire Arrays for Photoelectrochemical Water Splitting
Toxicity of Copper Oxide Engineered Nanoparticles to Maize (Zea mays L.) at Different Aging Times
Toxicity of CuO Engineered Nanoparticles to Eichhornia crassipes
Microstructure and Properties of Fe-6.5wt%Si Alloys Cores with Core-Shell Structures Prepared by Mechanical Alloying and Spark Plasma Sintering Methods
The Study of nano-SiO2/Polyacrylate Core-Shell Hybrid Emulsions
Facile Preparation and Photocatalytic Activity of TiO2 Microspheres with a Diameter of 1-8 m
Preparation of HgS Nanoparticles with Adjustable Dispersibility at Water/n-butyl Alcohol Interface
Research Progress on Preparation Technology of Calcium Sulfate
Spherical Nanometer Strontium Carbonate by Ultrasonic Method in the Water Phase
Synthesis and Photocathodic Protection Properties of MO/SnO2 Core-Hell Nanocomposites
Adsorption of Cd(II) from Aqueous Solution by Magnetic Graphene
Chapter 9: Ceramic
Synthesis of Al2OC Ceramic Powder by a Carbothermal Reduction Process
Study on the Oxidation Kinetics of In Situ -Sialon Bonded Al2O3-C Refractories
The Preparation of Porous Andalusite Refractory by Foaming Method
The Influence of Donor-Doped Concentration on the PTCR Characteristics of the Ban-xSmxTiO3 Based Ceramics Sintered in Reducing Atmosphere
Fabrication of SiO2 Porous Ceramics from Rice Husk Ash
Influence of nanoAl2O3 Powder on the Properties of Microporous Corundum Aggregates
Reaction and Sintering Mechanism of Forsterite Lightweight Material in Sodium Carbonate Molten Salt
Effect of Briquetting Pressure on the Performance of In Situ Formed Sialon in Al2O3-C Refractory Bricks
Electroless Plating Copper on SiC Particles
Chapter 10: Functional Materials
Research on Electromagnetic Shielding Efficiency of Metal Rubber Material
The Design and Preparation of X Band Absorbing Insulation Coatings
Modeling and Simulation of Underwater Acoustic Absorption Properties of Novel Macroporous Resins - Elastomer Thin Coatings
Effects of Bias on Optical and Chemical Bonding Properties of Germanium Carbon Films
1,8-Naphthyridine Modified Rhodamine B Derivatives: Turn-On Colorimetric Sensor for Cu2+
Preparation of Graphene Oxide Based on Expanded Graphite
Research on the Properties and Making Methold of Multi Alcohol Modification Particles ER Fluid
Experimental Investigation on Radiation Characteristic of Nanofluids for Direct Absorption Solar Collectors
Synthesis and Photocatalytic Properties of Flower-Like ZnIn2S4 Microspheres by a Solvothermal Method
Study on the Spectral Distribution Property of PDLC Films Color Display
Microwave Permeability of FeCo-Based Magnetic Thin Films
Changes of Band Gap Structure of 1-D Quasi-Periodic Photonic Crystal at Angular Incidence
Effects of the Sputtering Time of AlN Buffer Layer on the Quality of ZnO Thin Films
PPy/Cotton Fabric Composite Electrode for Electrocardiogram Monitoring
Finite Element Analysis of Piezoelectric Pile Dynamic Characteristics
Improving the Performance of Organic Light Emitting Diodes by Doping PEDOT:PSS
Chapter 11: Environmental Friendly Materials
Synthesis of Calcium Peroxide Microparticles and its Application in Glyphosate Wastewater Pretreatment
Synthesis of Loaded Silver 4A Zeolite Molecular Sieve with Magnetic Cores of SiO2/( -Fe2O3- SiO2) for Demercuration
Effect of Alkali Leaching on Properties of Chitosan Film
Physical and Mechanical Properties of Chitosan Films Incorporated with Florida Mandarin Oil
Cation and Anion Exchange Membranes Prepared by Radiation-Induced Graft Polymerization for Application in Electrodialysis
The Research on the Physical and Chemical Properties of Eggplant Stalk Fiber for the Complex Utilization of Stalk
Corrosion Behavior of Rare Earth Cerium Based Trivalent Chromium Conversion Coating on Zinc
Study on Season Factor in the Preparation of PVA/RS Composite
Study on Adsorption of Methylene Blue by Sarch-g-Polyacrylamide
Composite of Shortcut Grass and Poly(vinyl alcohol): Preparation and Performance
Chapter 12: Building Materials
Analysis on Unfrozen Water Content of Mohe Permafrost Based on NMR Method
About Research of Ramic Concrete Strength and Thermal Performance
The Research on Producing Recycling Cement Using Waste Concrete
The Magnetic Performance of the Particles of Steel Slag Powder
Study on Chloride Ion Penetrability of Recycled Aggregate Concrete
The Thinning Study of /4 Type Absorber Made of Carbon Fiber Membrane and Gypsum Board
Effect of Water-Binder Ratio and Mineral Admixture on Frost Scaling Resistance of Concrete
The Design and Preparation of Composite Gypsum Boards Absorber Based on Phase Modulation Membrane
Research on Compressive Properties of Sea Sand Concrete
Well Pattern Optimization Design for CBM Development
Chapter 12: Building Materials
Heat Transfer Analysis and Energy-Saving Methods of the Exterior Windows in the Northern Area
The Influence of Pretreatment and Usage on the Humidity Control Property of a Novel Paperboard
Quantitative Phase Analyses of a Slag Using X-Ray Powder Diffraction
The Impact of /4 Type Absorber Protective Layer 's Thickness on Absorbing Properties
Experiment on Decarburization of High Carbon Fly Ash and Preparation of Concrete
Chapter 13: Iron, Steel and Alloys
The Research of Hardox400 HSLA Steels Weldability
Surface Modification of SS2205 Duplex Stainless Steel by Plasma Nitriding at Anodic Potential
On Wear Resistance of Laser-Treated Striated Non-Smooth Surface of Nodular Cast Iron
Research on Impact Property of 40Cr Steel under Different Tempering Conditions
Corrosion Behavior of ZnAlMg Coating of Dual Phase Steel Sheet
The Electrochemistry Behaviour of Carbon Steel in 55% LiBr Solution with A-Mo Inhibitor
Study of Heat Treatment Technology on Medium-Carbon-Low-Alloy-Steel Large Hammer Formation of Gradient Performance
Properties of P91 Steel Steam Conduit Pipe with Low Hardness in a 600 MW Power Plant
The Production and Utilization of Two Smelting Processes for V-Ti Magnetite
Investigation on Mechanical Properties and Microstructure of SSM 356-T6 Aluminium Alloy by Diffusion Bonding
Experimental Study on Corrosion Prevention of a Multilayer Coating System
Cellular Automata Simulation of Grain Growth in Magnesium Alloy Heat Affected Zone of Laser Melt Injection
Effect of Heat Treatment Hardness of Al-Cu-Mg-Li-Zr, Al-Mg-Si and and Al-Mg-Zn Alloys-Experimental Correlation Using Factorial DOE and ANOVA Methods
Influence of Microstructure and Stress Ratio on Fatigue Crack Propagation in TiAl Alloy
Calculations for Diffusion Probability and Diffusivity of Interstitial Atom in one Lattice for -TiAl Alloy
Effects of Sm and Nd on Microstructure and Properties of AZ81 Magnesium Alloy
Effect of Adding Y2O3 on Synthesis of Al4SiC4 Powders
The Effects of Solid-Solution on Properties and Microstructure of 6063 Aluminum Alloy
The Effect of Cr Addition on the Microstructure of TiNi: First-Principles Calculations
A Study on Thermal Fatigue Behavior of Al-Si-Mg Casting Alloys
The Purification of ZL114A Alloy by Means of Bubble Floatation
Study of Damage Limit for Aluminum Alloy Plates with Surface Cracks under Cross-Thickness Bending
Creep Properties of Mg-12Gd-3Y-1Sm-0.5Zr Alloy
Effect of Pre-Treatment on the Precipitation Hardening of a Novel Al-Mg-Si Alloy
Effect of Ultrasonic/Electromagnetic Energy-Field on Structure Andproperties of Cast-Rolled 3003 Aluminum Alloy Strips
Study on Preparation and the Characteristics of Environment-Friendly Ce-Ti-Mn Conversion Coating on Aluminum Alloy 6061
Effect of AlF3 Addition on Electric Conductivity of NiFe2O4-Based Cermet Inert Anode
Microstructure and Mechanical Properties of Magnesium Alloy AZ61with 1%Sn Addition
Microstructure and Mechanical Properties of Cobalt Alloy Coating Deposited by Electro-Spark
Chapter 14: Materials Processing Technology
Characterization of Ni-Based Alloy Submicron WS2/CaF2 Composite Coatings Deposited by High Velocity Oxy-Fuel (HVOF) Spray Process
J-Integral and Plastic Limit Load of Hole-Edge Crack in Plate under Biaxial Loadings
Experimental Study of Electron Beam Welded QCr0.8 Bronze Joint
Finite Element Analysis of Rolling Process for Pilger Mill
Surface Modification of Magnesium Hydroxide by A-174 Silane
The Impact of Sinter and Thermoprint on Film Formation of nanoTiO2 Slurry
Design of Lead-Free Solders and Pollution Control of Lead
Research on the Coating Surface Microstructure of Coated Paper Related to Binder Migration
Effects of Thermal Transfer Paper Performance on Transfer Quality
Finite Element Analysis of Temperature Filed and Stress Field of Reducer
Describing the Influence of Ink Type on Ink Penetration and Distribution
Numerical Optimization of the Parison Thickness of Oil Drum in Extrusion Blow Molding
Research on the Relationship between Drying Method and Binder Distribution by Tracing Technique
The Effect of Welding Materials on 1Cr18Ni9Ti and 2Cr13 Steel Welding Joints Fracture Microstructure Pattern
Light-Gas Eccentrically High Speed Laser Cutting of Silicon Steel on Cold Rolling Production Line
Interface Microstructure in Laser Welding-Brazing of AZ31B/TC4 Dissimilar Alloys
Research of Milling Technique on V/Si by Mechanical Alloying
Laser Glazed Color Surface on Whiteware
Research on Mechanochemical of Silica and its Composite Powders
Energy Grade Analysis of Liquefied Natural Gas Cold Energy Utilization
Study on the Oxidation Degumming of Ramie Fiber
Study on the Mechanical Property of Ramie Fiber in Different Temperature
A Novel Design of Heat Exchanger for Epsom Salt Cooling Crystallization
Modification and Application of Sodium Bentonite in the Coating of Color Ink-Jet Paper
Chapter 15: Metallurgical Science and Technology
Characteristics of the Sierra Leone High Alumina Iron Ore and Utilization in Sintering
Determined the Activation Energy of the Decomposition of Calcium Carbonate by Nonlinear Isoconversional Method
Study on the Coupling Behaviour of Microwave Absorption for Sulphide Concentrate
Microwave Roasting Pyrite for Removal of the Sulfur and Arsenic
Effects of Fuel on Gasification Dephosphorization of High-Phosphorus Oolitic Hematite Ore
Study of Optimizing Combined-Blowing in EAF Based on K-Medoids Clustering Algorithm
Kinetic Study on Sulfuric Acid Dissolution of NaxH2-xTiO3 from Sodium Hydroxide Molten Method
Kinetics of Fe2+ Oxidization at Different Initial Fe2+ and Fe3+ Concentration in the Presence of Moderate Thermophilic Bacteria
The Dissolution of Zinc Oxide Ore in Sulfamic Acid Solution
Optimization of Soft Reduction Process for Continuous Thick Slab Casting
Ca-Si Alloy Addition Followed by Acid Leaching as a Route to Solar-Grade Silicon
Study on the Phase Composition and Particle Size of Boron Mud
Study on Formation of Bottom Dross in Hot-Dip Zn-0.1%Ni Alloy
Thermodynamics Study on the Disproportionation of AlCl in Vacuum
Microstructure and Property of Plasma Sprayed TiB2 Wettable Coatings on Carbon Cathodes
In Situ Observation of Inclusions Behavior in Molten State and Solidifying Interface of Tire Cord Steel
Effects of Solid Solution Temperature on the Structure and Properties of TC16 Titanium Alloy Bars
Effect of Semi-Solid Processing on Solidified Microstructure and Mechanical Properties of Rheo-Slurries A356 Sand Cast
Elevated Temperature Tensile Behavior of Rheo-Cast 7075-T6 Al Alloy Produced by GISS Technique
Chapter 16: Exploration and Extraction of Mineral Resources, Mining Engineering
Process Mineralogy Study on a Sandstone Copper Ore
Geologic Feature of Shilipo Copper Deposit in Xinjiang
Experimental Study on Recovery of Nickel from Nickel-Bearing Laterite
The Characters of Bairendaba - Huanggangliang Deposits, Inner Mongolia, China
Research on Bulk Floatation Discarding Tailing of Copper and Zinc Polymetallic Sulfide Ores
Geological Significance of the Volcanic Rocks in Weinan Area, Eastern Tianshan, China
Effect of Feed Solids on High Gradient Magnetic Separation of Cylindrical Magnetic Matrix
Study on the Relationship of the Quantity of CO2 Produced and the Wind Speed
Application of Reservoir Geological Modeling in the Wang Longzhuang Block
Synergic Surface Magnetization of Siderite on Hematite
Arsenic Removal from Pyrite Cinders by Oxidizing Roasting with Sodium Hydroxide Addition
Recycle of Spent Potlining with Low Carbon Grade by Floatation
Floating Separation between Collophanite and Dolomite Affected by Inorganic Interaction
The Effect of Ca2+, Mg2+, SO42- and PO43- on Phosphate Ore Flotation
The Solution Chemistry of the Effect of the Dissolved Ions on the Flotation Process in Collophane-Dolomite System
Theoretical Calculation of Dissolution Equilibrium for Cerussite in Pulp Solution
Theoretical Calculation of Dissolution Equilibrium for Galena in Pulp Solution
Effect of FeO Content in Ore on the Properties of Sinter
The Experimental Research on Combining Binary Compound Flooding and Profile Control Technology to Improve Recovery Efficiency
Nonlinear Regression Analysis of Binary Flooding Recovery Influence Factors
Research and Implementation on Face-and-Body Detection of the Stray Current of Mine
Application of Virtual Instrument Technology in Mine Hoist Control Based on the LabVIEW
Study of Luming Molybdenum Mine West Zone EH4 Geophysical Prospecting and the Geological Structure Influence on Slope Stability
Experiment Research of Luming Molybdenum Mine Rock Physical and Mechanical Properties
The R&D of the Emergency Rescue Vehicles Based on Borehole-Type Refuge Chamber
Chapter 17: Measurements and Modeling in Material Science
The Revision of Paper Surface Efficiency and its Influences on Printing Qualities
Projection Pursuit Regression Based on Hermite Polynomial for Atmospheric Corrosion Data Application
An Electromagnetic Parameters Measuring System Based on a Concave Cylindrical Cavity
Research on a Ultrasonic Detection Method about Disfigurements of Press Roll
Fuzzy Prediction of Molten Iron Silicon Content in BF Based on Hierarchical System
New Method of Distinguishing X-Ray Diffraction Curves about Laser Structure
Non-Destructive Characterization of Welding Defects Using MMM and ACFM Methods
Numerical Simulation and Die Optimization Design of Extrusion Process for a Complex Hollow Aluminum Alloy Multi-Hole Die
Activity Calculation Model for Oxygen Converter Final Slag
Numerical Simulation of Air Gap Formation in Water-Cooled Mold Casting
Application of Electron Probe Microanalyzer (EPMA) to Depositional Environment Identification of Sedimentary Rock
Microseismic Monitoring and Numerical Simulation Research of Floor Failure Depth in Extra-Thick Coal Seam
Direct Current Heating Model for the Siemens Reactor
CFD Simulation Research on Flow Characteristics of Fluidized Beds
Study on Kinetic Characteristics of Solid-Liquid Two-Phase in Transporting Pipeline of Natural Gas Hydrate
Numerical Simulation of Flue Gas Flow and NH3 Diffusion Properties in SCR System
Numerical Investigation on the Stirred Reactor with Rushton Turbine
Uncertainty Evaluation of Copper Reference Solution
A Coaxial Measurement System for Electromagnetic Parameters at Microwave Frequencies
Numerical Simulation of Projectile Material Phase Transformation during Penetration
The Material Mechanical Properties Reverse Calculation Method Bases on Depth-Sensing Indentation
The Use of Renka Cline Algorithm in X-Ray Diffraction Residual Stress Measurement
by "Nielsen BookData"