Biotechnology, chemical and materials engineering III : selected, peer reviewed papers from the 2013 3rd International Conference on Biotechnology, Chemical and Materials Engineering (CBCME 2013), December 12-13, 2013, Hong Kong, China
Author(s)
Bibliographic Information
Biotechnology, chemical and materials engineering III : selected, peer reviewed papers from the 2013 3rd International Conference on Biotechnology, Chemical and Materials Engineering (CBCME 2013), December 12-13, 2013, Hong Kong, China
（Advanced materials research, v. 884-885）
Trans Tech Publications, c2014
- : [set]
- Part 1
- Part 2
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from 2013 The 3rd International Conference on Biotechnology, Chemical and Materials Engineering (CBCME 2013), December 12-13, 2013, Hong Kong, China.
The 159 papers are grouped as follows:
Chapter 1: Chemical Materials and Technologies;
Chapter 2: Materials in Mechanical Engineering;
Chapter 3: Biotechnologies and Microbiology, Pharmacology, Biomaterials and Tissues;
Chapter 4: Materials and Technologies in Construction
Table of Contents
Preface and Committee
Chapter 1: Chemical Materials and Technologies
A Green Method for Synthesis of 5H-thiazolo[3,2-a]pyrimidine Derivatives Catalyzed by [Hnmp]HSO4 Lonic Liquid
A Kind of Novel Chemical Plugging Removal Technology Study for Polymer Flooding Wells
A Study of Oxalic Acid Adsorption on the Surface of Natural Mica
Adsorption Breakthrough Curves for Alkaline-Earth Metal Ions on the Resins in a Fixed-Bed Column
Analysis of Certain Phenomena in Tussah Silk Dye-Free Coloration
Application of Molecular Simulation on Wettability and its Alteration
Catalytic Wet Peroxide Oxidation of Dye Wastewater Using Fe2O3-CeO2/ -Al2O3 as Catalyst
Chiral Recognition of L-Carnitine Using Surface Molecularly Imprinted Microspheres via RAFT Polymerization
Combustion Kinetic Analysis of Lignite in Different Oxygen Concentration
Comparison Study on Hospital Wastewater Disinfection Technology
Comparison Study on Measuring Ammonia and Nitrogen in Surface Water by Flow Injection and Nessler's Reagent
Effect of Dendritic Architecture on Photochromism of Spiropyran Functionalized Dendrigraft Polybutadiene
Effect of Hydrolyzed Polyacrylamide Used in Oil Recovery on Characters of Crude Oil
Effect of Ionic Liquid Pretreatment on the Structure and Enzymatic Saccharification of Cassava Stillage Residues
Effects of Process Parameters on Hydrophobicity of Alumina Surfaces Fabricated by Hard Anodizing
Flow Field Analysis of PVC Polymerizer
Influence of Zirconium Oxide on Thermal Degradation and Flame Retardancy of Viscose Fibers
Influence on Desulfurization Capacity of Flue Gas Desulfurization Solution
Laboratory Evaluation on Foaming Agent for High-Temperature and High-Salinity Reservoir
Laser-Controlled Combustion of Solid Propellant
Minimization of the Disinfection by-Product Precursors in Treated Waters Exposed to Ozone and Chlorine
Molecular Design and Synthesis of Wettability Alteration Chemicals
New Insight into Wettability Alteration to Gas Wetness: Core Experiment and Modeling
Numerical Simulation Study on the Key Influencing Factors of Water-Invasion Performance for the Gas Wells with Bottom-Water
Plywood with Soy Protein - Acrylate Hybrid Adhesive
Preparation of Anti-Fouling Poly(Lactic Acid)(PLA) Hollow Fiber Membranes via Non-Solvent Induced Phase Separation
Preparation of Supported Fe/SiO2 Catalyst and its Catalytic Performance for Wastewater Treatment
Preparation of Two Magnetites and Application for the Removal of Fluoride from Waters
Removal of Manganese(II) Ions from Wastewater by H2O2as Oxidant
Research on Treatment of the Micro-Polluted Reservoir Water with Ozone Oxidation
Separation of Methyl Propionate-Methanol-Water by Salting-Out Extraction
Study on Experiments of Anion Exchange Resin Column for Purification of Hydrogen Peroxide
Study on Influencing Factors of Rapid Identification of Drainage Oil by Conductivity Method
Study on Volatile Evolution during the Eucalyptus Pyrolysis by Using TG-FTIR Analysis
Study on Mechanical Properties of Gun-Propellants with RDX.doc
Study on the Physical and Chemical and Mechanical Pulping Characteristic of Cotton Stalk Fiber
The Application of DOW Method for Production Risk Evaluation in Chemical Enterprises
The Development of Microporous in Coal by Spontaneous Combustion
The Evaluation of Decentralized Wastewater Reuse Based on Environmental Accounting
The Oxidation Behavior of Heavy Oil and Sands
The Present Situation and Future Trend of the Applications of TiO2 in the Wastewater Treatment
The Study of the Influence of Sulfur on the Catalyst Structure in Low Temperature Claus Processes
Water and Oil Dual-Absorption Composite Resins Prepared from High Internal Phase Emulsion
Adsorption of 4-Chloro-2,5-Dimethoxy Nitrobenzene by Activated Pyrolytic Char from Pine Sawdust
Adsorption of Neutral Red by Pyrolytic Char from Pine Sawdust
Analysis of Temperature Field of PVC Polymerization Reactor
Effects of Different Zeolite Cluster Model on the Simulation of Benzene Adsorption by ONIOM3 Method
Flame Retardant Properties of Viscose Fibers Containing Talcum Powder
Investigation into Coating Surface Free Energy and Microstructure of Coated Paper Related to Pigment
Natural Dye from Garcinia dulcis (Roxb.) Kurz Bark and Application on Silk Fabric by Using Pad-Batch Dyeing: A Study on Mordant Concentrations Efficiency
Preparation and Characterization of La2Ti2O7:Pr3+-Coated Pearlescent Pigment with Fluorescent
Preparation of a New Type Cleanup Additive
Removal of Phosphorus from High-Phosphorus Iron Ores by Sodium Roasting
Study on Solid Surface Sizing Agent for Paper
Study on the Photocatalytic Oxidation of Reactive Brilliant Blue X-BR with Lanthanum-Modified ZnO-TiO2
Study on the Pigging Process of Rich Gas Pipeline
Synthesis and Characterization of Luminescence Eu3+/Polyurethane Composite Material
Synthesis and Properties of Composite Membranes for Polymer Electrolyte Membrane Fuel Cells
UV Protection Property of Colorant from Lac for Silk Fabric Dyeing by Cold Pad-Batch: The Influence of Metal Mordants Concentration
Evaluation of NOX Removal from Simulated Flue Gas by "Absorption-Oxidation-Reduction" Method
Chapter 2: Materials in Mechanical Engineering
Application Study of Viscoelastic Damping Material for the Anti-Galloping of Overhead Transmission Lines
Effect of Latent Heat Related to Solidification Kinetics on Heat Transfer during Solidification of Al Alloy
Effect of Ozone Application to Microbial Contaminated Samples of In-Use Metalworking Fluids
Effect of the Electrode Shape on Properties of GaN-Based LED Chips
Effects of Temperature and Mineralizer on In2O3 Crystals Synthesized by Hydrothermal Method
Fabrication of Nanostructured Ni Film with Superhydrophobic Property
Hydrothermal Synthesis of Zn1-x CoxO Room Temperature DMS
Influence of Furnace Cooling Time on Precipitation of -Mg17Al12 Phase of AZ91 Magnesium Alloy
Morphological and Compositional Changes in the SiO2/SiC Interfacial Layer Induced by Thermal Annealing of Different Temperature
Research on Pinholes in Aluminum Foil
Research on the Influence of Drying Method on Ink Penetration of Coated Paper
Research Progress on Heat Treatment Processes of 7000 Series Aluminum Alloy
Structure and Properties of r-PET/TPEE/LDPE-g-AA Blends
Study on Coupling Effect of Hydrogen Pressure Stress Field of Micropores in the Heavy Forgings
Study on Microwave Curing and Mechanical Properties Quartz/UPR Composites
The Creep Properties of Materials and Finite Element Method
The Effect of Acrylonitrile Content on the Abrasion Behavior of Unfilled Nitrile Rubber
The Influence Factors of Silicon Steel Magnetic Property
The Microstructure and Rheological Properties of the Crosslinked Polymer Microspheres
Viscoelastic Properties of Constant Viscosity Natural Rubber with Mercaptan
Refractory Metal and its Preparation
Research of Complex PZT Film Base on Shear Mode Energy Harvesting
The Optimization Research on Hollow-Core Photonic BandgapFiber CoreTransversal Radius
Study on Residual Stresses and Fatigue Properties of Friction Stir Welding Joint
Numerical Simulation of Micro Flow Field on Biomimetic Sharkskin Micro-Grooved Surface
Velocity Profile of Viscous-Elastic Fluid in Eccentric Annulus with the Internal Rod Moving Axially
Chapter 3: Biotechnologies and Microbiology, Pharmacology, Biomaterials and Tissues
Analysis and Evaluation of Nutrient Composition of the Factory Farming Jade Perch
Bioinformatic Analysis of Codon Usage Bias in the ompC Gene of Salmonella pullorum
Bio-Synthesis of GABA by Streptococcus thermophilus QYW-LYS1 Isolated from Traditional Fermented Yoghurt
Canine Pregnancy Test and Diagnostic Research on Obstetric Diseases Based on B Ultrasound Application
Comparison of the Effect of Sterilization Pretreatment Using Four Different Bacteriostatic Agents on the Quality of Penaeus vannamei
Coupling Analysis of Electroencephalogram Based on Mutual Mode Entropy
Determination of Content of the Four Alkaloids and the Total Alkaloid in Co-Dergocrine Mesyiate Tablets by HPLC
Effect of Armillaria mellea on Blood Lipid Levels and Antioxidant Enzymes Activity in High Fat Mice
Effect of Complex Food Environment on Production of Enteriocin IN 3531 with Enterococcus faecium IN3531 as a Starter in Chinese Fermentation Paocai Making
Effect of Sulfate Concentration on Biohydrogen Production by Enriched Anaerobic Sludge
Effects of Huachansu Parenteral Emulsion on Immune Function in Mice
Expression Profile Analysis and Target Gene Prediction of Three Conserved MicroRNAs in Resistant Gossypium hirsutum Cv. KV-1 Responding to Verticillium dahliae
Extract of Housefly (Musca domestica) Maggot Anti-Inflammatory Parts could Regulate the Proliferation and Migration of TNF- - Stimulated Human Umbilical Vein Endothelial Cells
Isolated Strains of Nontuberculous Mycobacterium Interfere with Immune Responses Associated with Mycobacterium Bovis BCG Vaccination
Laboratory Research on Enhancing Oil Recovery of Three Bacteria D1-3
Microbial Production of 1,3-Propanediol by a Newly Isolated Citrobacter freundii Strain CF-5
Modified Synthesis of 2-Ethoxycarbonyl-3,4-Diethyl-Pyrrole and the Corresponding Octaethylporphyrin
Optimization of Fermentation Conditions for Chinese Fermentation Paocai with Enterococcus faecium IN3531as a Starter by Single Factor Method
Optimization of Operation Parameters of Dry Anaerobic Co-Digestion from Animal Manure and Straw in a Batch Reactor
Physical Properties and Antimicrobial Activity of a Poly(Lactic Acid)/Poly(Trimethylene Carbonate) Film Incorporated with Thymol
Physicochemical Characteristics of Bacteriocin Produced by Pediococcus pentosaceus H6
Phytochemical Study and its Quantity and Quality of Fresh and Freeze-Dried Young Coconut Juice (Cocos nucifera L.)
Preparation and Performance of Controlled-Release Tablets of Sasanquasaponin-Sodium Alginate-Hydroxypropyl Methyl Cellulose
Prokaryotic Expression and Identification on the ag85a and mpb70 Fusion Gene of Mycobacterium bovis
Properties of Anaerobic Activated Sludge in Biohydrogen Production Reactor
Regression Analysis between Ash Content and Ultimate Analysis Indexes for Bio-Fuels from the Biomass Power Plant
Research on Attention EEG Based on Jensen-Shannon Divergence
Screening and Mutation Induction by DBD Plasma of Potassium-Solubilizing Bacteria
Simultaneous Separation and Determination of Aconitine Compounds in Radix aconiti praeparata by High Performance Capillary Zone Electrophoresis
Stability and Toxicology of the Controlled-Release Tablets of Sasanquasaponin-Casein
Structure-Based Virtual Screening of Compound Library for Anti-Estrogen Breast Cancer Candidates
Study on Hydrolysis Conditions of Lactobacillus bulgaricus on Casein Sodium by Method of Response Surface and the Antioxidant Activity of Hydrolysates
The Application of PCR-DGGE Technique in Sheep Intestinal Microbial Diversity Research
The Effects of Floating Granulosa Cells Density on the Developmental Competence of Bovine Oocytes: A Study Using the Well-in-Well Culture System
Two New Natural Products from the Roots of Raphanus sativus L.
Use New PDLLA/PRGD Nerve Conduits for Promoting Peripheral Nerve Regeneration
Using 2D-PAGE and Mass Spectrometry (LC-MS/MS) for Embryo Proteins Analysis in Antheraea pernyi
Comparison of Chemical Properties and Ni Release of Stainless Steel and Nickel Titanium Wires
Determination of Picogram Levels of Levodopa in Pharmaceutical Preparations and Biofluids by Flow-Injection Chemiluminescence
Fast Testing Methods on the Performance of Laser Confocal Micro-Raman Spectroscopy System for Cell Analysis
Molecular Cloning and Structure Analysis of MpARF, an ADP-Ribosylation Factor in Monascus purpureus
Preparation of 4,6-Trichloromethyl-2-(p-Acetobiphenyl)-1,3,5-Triazine
Startup of Seawater Anaerobic Ammonia Oxidation Reactor
Surface Characteristics, Chemical Composition and Ni Release of NiTi Wire in Different pH
Synthesis, Characterization and Antitumor Activities of Cis-Chlorogenic Acid[(1R,2R)-1,2-Cyclohexanediamine] Platinum(II)
The Purification of Industrial Alkali Lignin with Xylanase
Transesterification of Natural Lecithin Catalyzed by Isopropylamine
Design, One-Pot Synthesis, and Evaluation of 7H-Thiazolo[3,2-b]-1,2,4-Triazin-7-One Derivatives as Dual Binding Site Acetylcholinesterase Inhibitors
Evaluation of Copper, Zinc and Chromium Contents of Some Wild Edible Mushrooms in Miyi
Expression of Cytosolic Glyceraldehyde-3-Phosphate Dehydrogenase in Response to Rice Blast Infection
Properties of Three Commercial Orthodontic Round Stainless Steel Wire
Protective Effect of Ginsenoside Rb1 Mixing with Several Lung Flush Solutions on Pulmonary Ischemia-Reperfusion Injury
Study on Preparation of Star PLGA Cucurbitacin-Loaded Microsphere and its Propertities
Genetic Toxicity of Berberine on Mouse Heart
Chapter 4: Materials and Technologies in Construction
Axial Compression Behavior of Masonry Prisms Considering the Influence of Mortar
Application Research on Horizontal Static Load for Elastic Long Pile
Calculation Method of Flexural Capacity under Limitation Failure of SRHC Beams Strengthened with FRP
Embedment Strength of Pinus sp. Wood to Metal Pins
Engineering Characteristics of Expansive Soil and its Improved Research Development
Influence of Anti-Rutting Agent on the Pavement Performance of Asphalt Mixture
Influence of Proportion Polyol/Pre-Polymer Castor-Oil Resin Components in Static Bending Properties of Particleboards Produced with Pinus sp.
New Steel Fiber Concrete Mechanics Parameters and Contact Explosion Tests
Numerical Analysis of Initial Support and Secondary Lining Contact Pressure of Phyllite Tunnel
Numerical Simulation of Bored Pile on Foundation Pit Support in Soft Soil Deposits
Optic-Energy Performance of Innovative and Traditional Materials for Roof Covering in Commercial Buildings in Central Italy
Particleboard Produced with Sawmill Waste of Different Wood Species
Soil Infiltration Characteristics under Different Land at Western Yunnan Plateau
Study on Analysis and Application of Horizontal Static Load Test Results for Elastic Long Pile
The Activation of Steel Slag and its Application in Construction and Building Materials
The Rivalry between Old and New Material in Creating Local Environmental Features - Illustrated by the Protection and Remediation of Traditional Environmental Features in Jingmai Village, Lancang County
The Shear Capacity Calculation of Steel Reinforcement High-Strength Concrete Short Columns Restrained with FRP
The Permeability of Three Kinds of Improved Soil in Northwest Area and its Application in Foundation Treatment
Experimental Study of Volume Features of Gyratory Compaction of Asphalt Mixture
by "Nielsen BookData"
