Biotechnology, chemical and materials engineering III : selected, peer reviewed papers from the 2013 3rd International Conference on Biotechnology, Chemical and Materials Engineering (CBCME 2013), December 12-13, 2013, Hong Kong, China

著者

    • International Conference on Biotechnology, Chemical and Materials Engineering
    • Sung, Wen-Pei
    • Chen, Ran

書誌事項

Biotechnology, chemical and materials engineering III : selected, peer reviewed papers from the 2013 3rd International Conference on Biotechnology, Chemical and Materials Engineering (CBCME 2013), December 12-13, 2013, Hong Kong, China

edited by Wen-Pei Sung and Ran Chen

(Advanced materials research, v. 884-885)

Trans Tech Publications, c2014

  • : [set]
  • Part 1
  • Part 2

大学図書館所蔵 件 / 1

この図書・雑誌をさがす

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). Collection of selected, peer reviewed papers from 2013 The 3rd International Conference on Biotechnology, Chemical and Materials Engineering (CBCME 2013), December 12-13, 2013, Hong Kong, China. The 159 papers are grouped as follows: Chapter 1: Chemical Materials and Technologies; Chapter 2: Materials in Mechanical Engineering; Chapter 3: Biotechnologies and Microbiology, Pharmacology, Biomaterials and Tissues; Chapter 4: Materials and Technologies in Construction

目次

Preface and Committee Chapter 1: Chemical Materials and Technologies A Green Method for Synthesis of 5H-thiazolo[3,2-a]pyrimidine Derivatives Catalyzed by [Hnmp]HSO4 Lonic Liquid A Kind of Novel Chemical Plugging Removal Technology Study for Polymer Flooding Wells A Study of Oxalic Acid Adsorption on the Surface of Natural Mica Adsorption Breakthrough Curves for Alkaline-Earth Metal Ions on the Resins in a Fixed-Bed Column Analysis of Certain Phenomena in Tussah Silk Dye-Free Coloration Application of Molecular Simulation on Wettability and its Alteration Catalytic Wet Peroxide Oxidation of Dye Wastewater Using Fe2O3-CeO2/ -Al2O3 as Catalyst Chiral Recognition of L-Carnitine Using Surface Molecularly Imprinted Microspheres via RAFT Polymerization Combustion Kinetic Analysis of Lignite in Different Oxygen Concentration Comparison Study on Hospital Wastewater Disinfection Technology Comparison Study on Measuring Ammonia and Nitrogen in Surface Water by Flow Injection and Nessler's Reagent Effect of Dendritic Architecture on Photochromism of Spiropyran Functionalized Dendrigraft Polybutadiene Effect of Hydrolyzed Polyacrylamide Used in Oil Recovery on Characters of Crude Oil Effect of Ionic Liquid Pretreatment on the Structure and Enzymatic Saccharification of Cassava Stillage Residues Effects of Process Parameters on Hydrophobicity of Alumina Surfaces Fabricated by Hard Anodizing Flow Field Analysis of PVC Polymerizer Influence of Zirconium Oxide on Thermal Degradation and Flame Retardancy of Viscose Fibers Influence on Desulfurization Capacity of Flue Gas Desulfurization Solution Laboratory Evaluation on Foaming Agent for High-Temperature and High-Salinity Reservoir Laser-Controlled Combustion of Solid Propellant Minimization of the Disinfection by-Product Precursors in Treated Waters Exposed to Ozone and Chlorine Molecular Design and Synthesis of Wettability Alteration Chemicals New Insight into Wettability Alteration to Gas Wetness: Core Experiment and Modeling Numerical Simulation Study on the Key Influencing Factors of Water-Invasion Performance for the Gas Wells with Bottom-Water Plywood with Soy Protein - Acrylate Hybrid Adhesive Preparation of Anti-Fouling Poly(Lactic Acid)(PLA) Hollow Fiber Membranes via Non-Solvent Induced Phase Separation Preparation of Supported Fe/SiO2 Catalyst and its Catalytic Performance for Wastewater Treatment Preparation of Two Magnetites and Application for the Removal of Fluoride from Waters Removal of Manganese(II) Ions from Wastewater by H2O2as Oxidant Research on Treatment of the Micro-Polluted Reservoir Water with Ozone Oxidation Separation of Methyl Propionate-Methanol-Water by Salting-Out Extraction Study on Experiments of Anion Exchange Resin Column for Purification of Hydrogen Peroxide Study on Influencing Factors of Rapid Identification of Drainage Oil by Conductivity Method Study on Volatile Evolution during the Eucalyptus Pyrolysis by Using TG-FTIR Analysis Study on Mechanical Properties of Gun-Propellants with RDX.doc Study on the Physical and Chemical and Mechanical Pulping Characteristic of Cotton Stalk Fiber The Application of DOW Method for Production Risk Evaluation in Chemical Enterprises The Development of Microporous in Coal by Spontaneous Combustion The Evaluation of Decentralized Wastewater Reuse Based on Environmental Accounting The Oxidation Behavior of Heavy Oil and Sands The Present Situation and Future Trend of the Applications of TiO2 in the Wastewater Treatment The Study of the Influence of Sulfur on the Catalyst Structure in Low Temperature Claus Processes Water and Oil Dual-Absorption Composite Resins Prepared from High Internal Phase Emulsion Adsorption of 4-Chloro-2,5-Dimethoxy Nitrobenzene by Activated Pyrolytic Char from Pine Sawdust Adsorption of Neutral Red by Pyrolytic Char from Pine Sawdust Analysis of Temperature Field of PVC Polymerization Reactor Effects of Different Zeolite Cluster Model on the Simulation of Benzene Adsorption by ONIOM3 Method Flame Retardant Properties of Viscose Fibers Containing Talcum Powder Investigation into Coating Surface Free Energy and Microstructure of Coated Paper Related to Pigment Natural Dye from Garcinia dulcis (Roxb.) Kurz Bark and Application on Silk Fabric by Using Pad-Batch Dyeing: A Study on Mordant Concentrations Efficiency Preparation and Characterization of La2Ti2O7:Pr3+-Coated Pearlescent Pigment with Fluorescent Preparation of a New Type Cleanup Additive Removal of Phosphorus from High-Phosphorus Iron Ores by Sodium Roasting Study on Solid Surface Sizing Agent for Paper Study on the Photocatalytic Oxidation of Reactive Brilliant Blue X-BR with Lanthanum-Modified ZnO-TiO2 Study on the Pigging Process of Rich Gas Pipeline Synthesis and Characterization of Luminescence Eu3+/Polyurethane Composite Material Synthesis and Properties of Composite Membranes for Polymer Electrolyte Membrane Fuel Cells UV Protection Property of Colorant from Lac for Silk Fabric Dyeing by Cold Pad-Batch: The Influence of Metal Mordants Concentration Evaluation of NOX Removal from Simulated Flue Gas by "Absorption-Oxidation-Reduction" Method Chapter 2: Materials in Mechanical Engineering Application Study of Viscoelastic Damping Material for the Anti-Galloping of Overhead Transmission Lines Effect of Latent Heat Related to Solidification Kinetics on Heat Transfer during Solidification of Al Alloy Effect of Ozone Application to Microbial Contaminated Samples of In-Use Metalworking Fluids Effect of the Electrode Shape on Properties of GaN-Based LED Chips Effects of Temperature and Mineralizer on In2O3 Crystals Synthesized by Hydrothermal Method Fabrication of Nanostructured Ni Film with Superhydrophobic Property Hydrothermal Synthesis of Zn1-x CoxO Room Temperature DMS Influence of Furnace Cooling Time on Precipitation of -Mg17Al12 Phase of AZ91 Magnesium Alloy Morphological and Compositional Changes in the SiO2/SiC Interfacial Layer Induced by Thermal Annealing of Different Temperature Research on Pinholes in Aluminum Foil Research on the Influence of Drying Method on Ink Penetration of Coated Paper Research Progress on Heat Treatment Processes of 7000 Series Aluminum Alloy Structure and Properties of r-PET/TPEE/LDPE-g-AA Blends Study on Coupling Effect of Hydrogen Pressure Stress Field of Micropores in the Heavy Forgings Study on Microwave Curing and Mechanical Properties Quartz/UPR Composites The Creep Properties of Materials and Finite Element Method The Effect of Acrylonitrile Content on the Abrasion Behavior of Unfilled Nitrile Rubber The Influence Factors of Silicon Steel Magnetic Property The Microstructure and Rheological Properties of the Crosslinked Polymer Microspheres Viscoelastic Properties of Constant Viscosity Natural Rubber with Mercaptan Refractory Metal and its Preparation Research of Complex PZT Film Base on Shear Mode Energy Harvesting The Optimization Research on Hollow-Core Photonic BandgapFiber CoreTransversal Radius Study on Residual Stresses and Fatigue Properties of Friction Stir Welding Joint Numerical Simulation of Micro Flow Field on Biomimetic Sharkskin Micro-Grooved Surface Velocity Profile of Viscous-Elastic Fluid in Eccentric Annulus with the Internal Rod Moving Axially Chapter 3: Biotechnologies and Microbiology, Pharmacology, Biomaterials and Tissues Analysis and Evaluation of Nutrient Composition of the Factory Farming Jade Perch Bioinformatic Analysis of Codon Usage Bias in the ompC Gene of Salmonella pullorum Bio-Synthesis of GABA by Streptococcus thermophilus QYW-LYS1 Isolated from Traditional Fermented Yoghurt Canine Pregnancy Test and Diagnostic Research on Obstetric Diseases Based on B Ultrasound Application Comparison of the Effect of Sterilization Pretreatment Using Four Different Bacteriostatic Agents on the Quality of Penaeus vannamei Coupling Analysis of Electroencephalogram Based on Mutual Mode Entropy Determination of Content of the Four Alkaloids and the Total Alkaloid in Co-Dergocrine Mesyiate Tablets by HPLC Effect of Armillaria mellea on Blood Lipid Levels and Antioxidant Enzymes Activity in High Fat Mice Effect of Complex Food Environment on Production of Enteriocin IN 3531 with Enterococcus faecium IN3531 as a Starter in Chinese Fermentation Paocai Making Effect of Sulfate Concentration on Biohydrogen Production by Enriched Anaerobic Sludge Effects of Huachansu Parenteral Emulsion on Immune Function in Mice Expression Profile Analysis and Target Gene Prediction of Three Conserved MicroRNAs in Resistant Gossypium hirsutum Cv. KV-1 Responding to Verticillium dahliae Extract of Housefly (Musca domestica) Maggot Anti-Inflammatory Parts could Regulate the Proliferation and Migration of TNF- - Stimulated Human Umbilical Vein Endothelial Cells Isolated Strains of Nontuberculous Mycobacterium Interfere with Immune Responses Associated with Mycobacterium Bovis BCG Vaccination Laboratory Research on Enhancing Oil Recovery of Three Bacteria D1-3 Microbial Production of 1,3-Propanediol by a Newly Isolated Citrobacter freundii Strain CF-5 Modified Synthesis of 2-Ethoxycarbonyl-3,4-Diethyl-Pyrrole and the Corresponding Octaethylporphyrin Optimization of Fermentation Conditions for Chinese Fermentation Paocai with Enterococcus faecium IN3531as a Starter by Single Factor Method Optimization of Operation Parameters of Dry Anaerobic Co-Digestion from Animal Manure and Straw in a Batch Reactor Physical Properties and Antimicrobial Activity of a Poly(Lactic Acid)/Poly(Trimethylene Carbonate) Film Incorporated with Thymol Physicochemical Characteristics of Bacteriocin Produced by Pediococcus pentosaceus H6 Phytochemical Study and its Quantity and Quality of Fresh and Freeze-Dried Young Coconut Juice (Cocos nucifera L.) Preparation and Performance of Controlled-Release Tablets of Sasanquasaponin-Sodium Alginate-Hydroxypropyl Methyl Cellulose Prokaryotic Expression and Identification on the ag85a and mpb70 Fusion Gene of Mycobacterium bovis Properties of Anaerobic Activated Sludge in Biohydrogen Production Reactor Regression Analysis between Ash Content and Ultimate Analysis Indexes for Bio-Fuels from the Biomass Power Plant Research on Attention EEG Based on Jensen-Shannon Divergence Screening and Mutation Induction by DBD Plasma of Potassium-Solubilizing Bacteria Simultaneous Separation and Determination of Aconitine Compounds in Radix aconiti praeparata by High Performance Capillary Zone Electrophoresis Stability and Toxicology of the Controlled-Release Tablets of Sasanquasaponin-Casein Structure-Based Virtual Screening of Compound Library for Anti-Estrogen Breast Cancer Candidates Study on Hydrolysis Conditions of Lactobacillus bulgaricus on Casein Sodium by Method of Response Surface and the Antioxidant Activity of Hydrolysates The Application of PCR-DGGE Technique in Sheep Intestinal Microbial Diversity Research The Effects of Floating Granulosa Cells Density on the Developmental Competence of Bovine Oocytes: A Study Using the Well-in-Well Culture System Two New Natural Products from the Roots of Raphanus sativus L. Use New PDLLA/PRGD Nerve Conduits for Promoting Peripheral Nerve Regeneration Using 2D-PAGE and Mass Spectrometry (LC-MS/MS) for Embryo Proteins Analysis in Antheraea pernyi Comparison of Chemical Properties and Ni Release of Stainless Steel and Nickel Titanium Wires Determination of Picogram Levels of Levodopa in Pharmaceutical Preparations and Biofluids by Flow-Injection Chemiluminescence Fast Testing Methods on the Performance of Laser Confocal Micro-Raman Spectroscopy System for Cell Analysis Molecular Cloning and Structure Analysis of MpARF, an ADP-Ribosylation Factor in Monascus purpureus Preparation of 4,6-Trichloromethyl-2-(p-Acetobiphenyl)-1,3,5-Triazine Startup of Seawater Anaerobic Ammonia Oxidation Reactor Surface Characteristics, Chemical Composition and Ni Release of NiTi Wire in Different pH Synthesis, Characterization and Antitumor Activities of Cis-Chlorogenic Acid[(1R,2R)-1,2-Cyclohexanediamine] Platinum(II) The Purification of Industrial Alkali Lignin with Xylanase Transesterification of Natural Lecithin Catalyzed by Isopropylamine Design, One-Pot Synthesis, and Evaluation of 7H-Thiazolo[3,2-b]-1,2,4-Triazin-7-One Derivatives as Dual Binding Site Acetylcholinesterase Inhibitors Evaluation of Copper, Zinc and Chromium Contents of Some Wild Edible Mushrooms in Miyi Expression of Cytosolic Glyceraldehyde-3-Phosphate Dehydrogenase in Response to Rice Blast Infection Properties of Three Commercial Orthodontic Round Stainless Steel Wire Protective Effect of Ginsenoside Rb1 Mixing with Several Lung Flush Solutions on Pulmonary Ischemia-Reperfusion Injury Study on Preparation of Star PLGA Cucurbitacin-Loaded Microsphere and its Propertities Genetic Toxicity of Berberine on Mouse Heart Chapter 4: Materials and Technologies in Construction Axial Compression Behavior of Masonry Prisms Considering the Influence of Mortar Application Research on Horizontal Static Load for Elastic Long Pile Calculation Method of Flexural Capacity under Limitation Failure of SRHC Beams Strengthened with FRP Embedment Strength of Pinus sp. Wood to Metal Pins Engineering Characteristics of Expansive Soil and its Improved Research Development Influence of Anti-Rutting Agent on the Pavement Performance of Asphalt Mixture Influence of Proportion Polyol/Pre-Polymer Castor-Oil Resin Components in Static Bending Properties of Particleboards Produced with Pinus sp. New Steel Fiber Concrete Mechanics Parameters and Contact Explosion Tests Numerical Analysis of Initial Support and Secondary Lining Contact Pressure of Phyllite Tunnel Numerical Simulation of Bored Pile on Foundation Pit Support in Soft Soil Deposits Optic-Energy Performance of Innovative and Traditional Materials for Roof Covering in Commercial Buildings in Central Italy Particleboard Produced with Sawmill Waste of Different Wood Species Soil Infiltration Characteristics under Different Land at Western Yunnan Plateau Study on Analysis and Application of Horizontal Static Load Test Results for Elastic Long Pile The Activation of Steel Slag and its Application in Construction and Building Materials The Rivalry between Old and New Material in Creating Local Environmental Features - Illustrated by the Protection and Remediation of Traditional Environmental Features in Jingmai Village, Lancang County The Shear Capacity Calculation of Steel Reinforcement High-Strength Concrete Short Columns Restrained with FRP The Permeability of Three Kinds of Improved Soil in Northwest Area and its Application in Foundation Treatment Experimental Study of Volume Features of Gyratory Compaction of Asphalt Mixture

「Nielsen BookData」 より

関連文献: 1件中  1-1を表示

詳細情報

  • NII書誌ID(NCID)
    BB16018028
  • ISBN
    • 9783037859957
  • 出版国コード
    sz
  • タイトル言語コード
    eng
  • 本文言語コード
    eng
  • 出版地
    Durnten-Zurich
  • ページ数/冊数
    2 v. (738 p.)
  • 大きさ
    24 cm
  • 親書誌ID
ページトップへ