Advances in materials and materials processing IV : selected, peer reviewed papers from the 2013 4th International Conference on Advances in Materials and Manufacturing (ICAMMP 2013), 18-19 December, 2013, Kunming, China
著者
書誌事項
Advances in materials and materials processing IV : selected, peer reviewed papers from the 2013 4th International Conference on Advances in Materials and Manufacturing (ICAMMP 2013), 18-19 December, 2013, Kunming, China
（Advanced materials research, v. 887-888）
Trans Tech Publications, c2014
- : [set]
- Part 1
- Part 2
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the 2013 4th International Conference on Advances in Materials and Manufacturing (ICAMMP 2013), 18-19 December, 2013, Kunming, China.
The 268 papers are grouped as follows:
Chapter 1: Composites,
Chapter 2: Micro/Nano Materials,
Chapter 3: Steel/Iron,
Chapter 4: Ceramics,
Chapter 5: Metal Alloy Material,
Chapter 6: Optical / Electrical / Magnetic Materials,
Chapter 7: Energy Materials,
Chapter 8: Biomaterials and Technology,
Chapter 9: Chemical Materials,
Chapter 10: Film Material,
Chapter 11: Building Materials,
Chapter 12: Materials Mechanical Behavior and Fracture,
Chapter 13: Materials Physics and Chemistry,
Chapter 14: Selection, Testing and Evaluation of Materials,
Chapter 15: Surface Engineering / Coatings Technology,
Chapter 16: Material Forming,
Chapter 17: Material Machining,
Chapter 18: Welding and Joining,
Chapter 19: Materials Processing Technologies
目次
Preface and Conference Organization
Chapter 1: Composites
The Study on Synthesis and Impact Properties of Novel Dual Polymerization of Epoxy Composite Materials to Green Production Process
Investigation of the Thermal and Optical Properties of Photopolymerizable Resin Enforced by Nanopowder in the Green Production Process
Analysis of Micro Structure and Elastic Property on 3-D Tubular Woven Carbon Fiber Composite
Effects of CeO2 Addition on Mechanical Properties of LaB6/B4C Composites
On the Damping Properties of a Polyurea Elastomer
Preparation and Characterization of Phosphorus Removal Agent by Lanthanum-Copper Composite Oxide
Microstructure and Properties of the Dispersion-Strengthened Cu-ZrO2 Composite for Application of Spot-Welding Electrode
Study on the Mechanical Properties of Steel - Polyurethane Tube
The Study of Impact Rule of Si Element on Cu/Al Composite Interface Compounds
Preparation and Thermal Properties of Polybenzoxazine/TiC Hybrids
Study on the Surfactant/Polymer Combination Flooding Relative Permeability Curves in Offshore Heavy Oil Reservoirs
Analysis of Composites for Best Designs of Refractive Solar Concentrators
Experimental Investigation into Spall of Carbon Phenolic Composites
Study on CF Reinforced Interface Properties of PES-C Resin Matrix Composite
Thermal and Mechanical Properties of Aluminate Cementitious Functional Materials Enriched with Nano-SiO2 for Thermal Energy Storage
Model I Interlaminar Fracture Toughness of Carbon Fiber Reinforced Polymer Matrix Composites
The Influence of Bi2O3 on SiO2-Al2O3-B2O3-RO Glass Propertiesarts
Study of Synergistic Effects of Cerium Oxide on Intumescent Flame Retardant Polypropylene System
Chapter 2: Micro/Nano Materials
A Copolymerization Modified Acrylate Resin and its Polyhedral Oligomeric Silsesquioxane Composites
Design and Experiment of T-Shape Glass Micro-Nozzle for Preparation of Microcapsules
Morphology Controllable Preparation of Gold Nanoplates through an Eco-Friendly Wet-Chemical Route
Research on the Conductive Property of CNT Nanopaper Facilitates the Actuation in Shape Memory Polymer Composites
The Crystallization Research on the Zr-Based Bulk Metallic Glasses by Ion Thinning
Influence of Temperature on the Preparation of GaN Nanowires
The Effects of Discharge Parameters on the Surface Morphology of Nickel Microspheres by EDM Combined with Ultrasonic Field
The Preparation of Porous TiO2 Nanostructure by Triblock Copolymers Co-Templating Method of TiOSO4 Solution Derived from Ilmenite Ore
Catalytic Degradation of Phenol by -Fe2O3 Nanoparticles
Size-Dependence of Photoluminescence Property of ZnO Nanoparticles
Controlling the Size and Dispersion of ZnO@SiO2 Core-Shell Nanostructure by Addition of Triblock Copolymer Surfactant and pH Adjustment during Precipitation and Encapsulation Process
Enhancing the Fluorescence of Graphene Quantum Dots with a Oxidation Way
2D Assembly of Palladium Nanoparticles and AFM Characterization
Blocking Temperature of the System Core-Shell Nanoparticles
Growth Environment of Carbon Nanotubes by DC-PCVD
Reliable Solvothermal Growth of Diverse Heterostructures Based on CdS Nanowires
Hydrothermal Synthesis and Visible-Light-Driven Photocatalytic Activities of Bi2WO6 Uniform Hierarchical Microspheres
Chapter 3: Steel/Iron
Study of Inclusion's Source and Character in Different T[O] Content
The Influence of Transient Casting on Inclusions in Steel
The Optimization of the Temper Technology of Production about Soft Steel
Hot Ductility of Low Carbon Nb-Microalloyed Weathering Steel
Influence of Heat Treatment on Mechanical Properties and Microstructure of Low Alloy Cast Steel (ZG25MnNi)
Effect of Hydrogen Induced Additional Stress on the Influence on High-Strength Steels
Influence of Milling Time on Morphology and Properties of Precursor Powders for 9Cr Oxide Dispersion Strengthened Steel
A Study on the Microstructure and Hardness Feature of 6CrW2MoVSi Steel after Heat Treatment
Microstructure Observation of the Tensile Fractured 430 Ferritic Stainless Steel
Influence of Oxide Morphologies on the Galvanizability of the Third Generation Automotive Steel
Effect of Heat Treatment Processes on Microstructure and Mechanical Properties of Nb-Ti-Stabilized 430 Stainless Steel Plate
Research and Implementation of the Data Fitting Algorithm for Testing the Metallurgical Performance of Iron Ore
The Research of Non-Oriented Electrical Steel Processed by Stress Relief Annealing Experiments
Designing Q&P Process for Experimental Steel with 0.47 % Carbon Content
Raman Analysis of the Rust Layer on Rusted Cast Iron Artifacts
Source of Inclusion in IF Steel End Slabs
Multiaxial Fatigue Life Prediction of 50CrVA Spring Steel under Proportional Loading
Effect of Austenitizing Processes on Isothermal Quenching Microstructure in Bearing Steel
Effect of Carbon Content in Direct Reduction Process of Limonite Iron Oxide to Produce Pig Iron Substitute for Thin Wall Ductile Iron Process
Chapter 4: Ceramics
Investigation on Electrical Properties of CaCu3Ti4O12-Modified (Na,Bi)TiO3-BaTiO3 Lead Free Piezoceramics
Brief Introduction of Microwave Ceramics Developed in our Labs for Dielectric Resonators
The Effects of K/Na Ratio on the Electrical Properties of (Li, Sb, Ta) Modified KNN Piezoelectric Ceramics at Reduced Temperature with KNbO3 as Sintering Aid
Structure and Performance of Calcined Bauxite
Chapter 5: Metal Alloy Material
Microstructure and Compression Deformation Behavior in the Quasicrystal-Reinforced Mg-6Zn-2Y Alloy Solidified under Super-High Pressure at Room-Temperature
Research on Compressive Behavior and Deformation Heating of 7075-T6 Aluminum Alloy during Hot Compression
Aircraft Bearings Fracture Failure Analysis
An Experimental Investigation on the Solubility of Zr in Cu-Sn Alloys
Grain Structure and Precipitates in Squeeze Casting Al-Li-Mg-Zr Alloy
Dynamics of Phase Transformation in Cu-Cr-Zr Alloy
Effects of Structures of Zinc/Substrate Interface on Coating Adhesion of Hot-Dip Galvanized DP Steels
Cube Texture Formation of Cu-33at.%Ni Alloy Substrates and CeO2 Buffer Layer for YBCO Coated Conductors
Research on the Microstructure and Properties of Hypereutectic Al-Si Alloy for Semi-Solid Forming during Heat Treatment
Corrosion Behavior of Incoloy 800 in Molten Nitrate Salt
Effect of Ti on the Structure and Properties of Cu-15Ni-10Mn Alloy As-Cast Smelted at Atmosphere
Influence of Etchants on Phase Morphology of Casting Ni-Based Superalloy
The Measured Change in d-Electron of Ni in Ni-7.2at%Ti Alloy Studied by Electron Energy Loss Spectroscopy
Effect of Homogenization Annealing on Microstructure and Property of Cu-7.5Ni-5Sn Alloy
Effect of Alloying Elements V, Cr and Ni on the Electronic Structure and Mechanical Properties of FeAl from First-Principles Calculation
Effects of Additives on the Surface Layers of Boronized TC4 Titanium Alloys
Characterization on the Microstructures and Optical Performances of TiO2 Doped with Transition Metals
Dynamic Strain - Induced Boundary Migration during Dynamic Recovery at a High Temperature Deformation with a Lower Strain Rate
Numerical Analysis of Residual Stresses in Quenched High-Strength Aluminum Alloy Ultra-Thick Plates and their Reduction through Single-Side Cold Compression Method
Influence of Three Pattern Materials on the Marginal Adaption of Co-Cr Alloy Inner Crown of PFM Endocrown
Chapter 6: Optical / Electrical / Magnetic Materials
The Thermally Stimulated Current (TSC) Technique on Evaluating Degradation of ZnO Varistors
Design and Analysis of Self-Collimation-Based Photonic Crystal Beam Splitter
Electronic Structures and Spectral Properties of 4-Thiophene-1,8-Naphthalimide Derivatives
Fabrication of Shape Controllable Micro-Lens Arrays by Drop on Demand Printing on the Glass Micro-Holes Arrays
Analysis and Design of Transparent Microwave Absorbing Materials Based on the Destructive Interference at the Microwave Range
Characteristics of Slow Light in a Photonic Crystal Coupled-Cavity Waveguide
Investigation on p-In0.51Ga0.49As LOPC Mode by Raman Spectra
Influence of the Nitridation Time after the Al Pre-Seeded Layer on the Properties of GaN Layer Grown on Si (1 1 1)
Growth and Spectrum Properties of Ho:BaY2F8 Crystal
Preparation and Surface Modification of SiO2 Particles Used in Electronic Ink
The Photoluminescence Enhancement and Stability of Porous Silicon by Cathodic Reduction and Acid Treatment
Epitaxial Growth of SiC Epilayers for 10kV Schottky Diodes Using Chloride-Based CVD
Microstructure and Compound Developed from the Ce-As-Fe at 1173K
Chapter 7: Energy Materials
Current Research of Biodiesel Used on IC Engine and Improved Measures of Emissions
Hot corrosion resistance of four graphite material in molten Solar Salt
Current Situation of the Study on Oxidative Stability of Biodiesel
The Study on Oxidation Resistance of SiC Composites Used for Solar Absorber Coating
Influence of Activated Carbon to the Hydrogen Storage Characteristics of THF Hydrate
The Ni-MH Power Battery Electrode Material Admixture Process Fuzzy Control System
Kinetics Studies on Chemical Reaction of Producing Biodiesel Based on Transesterification
Chapter 8: Biomaterials and Technology
Alpha-Glucosidase Immobilization Based on PMMA/Chitosan Core-Shell Microparticles
Antibacterial Activity of the Extracts from Gentiana farreri Balf. f.
Research on Compound Bone Oyster Sauce and its Development
A Preliminary Study of Crosslinked Alginate-Chitosan Microspheres for Delivery System
The Structure Design and Fabrication of Drug Releasing Porous Material
The Chemical Swelling Effect on Poplar APMP
Effects of Cellulase Treatment on Surface Structure of Fast-Growing Poplar APMP Pulp
Vasorelaxation of Rat Aorta Induced by Extract from Clerodendranthus spicatus
Glutaraldehyde Cross-Linked Silk Fibroin Films for Controlled Release
AMPK and Metabolisms of Glucose and Lipid
Isolation and Characterization of Abietic Acid
Comparison of Physicochemical Properties of Gelatins Prepared from Different Fish Skins through Hot Water Extraction at Mild Temperature Condition
Establishment of a Sensitive Nitric Oxide Bioassay for Bioscreening Application
Preparation and Properties and Application of Renewable Source (Palm Oil Polyol) Based Polyurethanes Coatings and its Thermal Stability Improvement by Clay Nanocomposites
Production of Liquid Fuel by Catalytic Reformation of Carbohydrates in Energy Crops
Physicochemical Characterization of Oxidatively Degraded Calcium Lignosulfonate via Alkaline Hydrogen Peroxide
Effects of Uranium (VI) Stress on Growth and Antioxidant System in Chinese Cabbage
The Development of the Multi-Functional Wool/Aramid 1313 Blended Fabric
Anthocyanins Extracted from Chinese Blueberry and its Anticancer Effects on HepG2 Cells
Application of Ferritin Modified Eggshell Membrane in Heavy Metal Ion Uptake and Recovery
Preparation and Antioxidant Activities of Peanut (Arachin conarachin L.) Protein Peptides by Bacillus Subtilis Solid State Fermentation Method
Optimization of Aflatoxin Production of Aspergillus flavus on Peanuts
Study on Antibacterial Mechanism of Hemp Fiber
The Effect of Different Salt Additions on the Microstructure of YBCO Synthesized by a Biomimetic Method
The Sensory Quality and Textural Property of Ready-to-Eat Sea Cucumber in Storage Period
Application of Matlab Data Processing System in Research of Drug Microemulsion
Study on Effect of Rice Flour on Isothermal Crystallization Kinetics of Biodegradable Poly(L-Lactic Acid)
Finite Element Analysis Based Ultrasonic Elastography
Chapter 9: Chemical Materials
Technique Status and Prospect of Synthetic Rutile
Study on the Physicochemical Properties of the Mixture of Water and 1-butyl-3-methylimidazolium Hydrogen Sulfate Salt Ionic Liquids
Function and Application of Calixarene Derivatives
Study on the Clean Production Process of Basic Chromium Sulphate
To Measure the Absorbance at 328nm by Ultraviolet-Visible Spectrophotometer - an Alternative Pathway to Measure the Activity of Acetylcholinesterase
Facile Synthesis and Crystal Structure of N-(3-Cyano-4,5,6,7-tetrahydrobenzo[b]thiophen-2-yl)-2,2,2-trifluoroacetamide
Study of Phenyl Phenol Formaldehyde Resin and its Curing Performance of Aniline
Preparation and Characterization of High Porosity and High Oil-Absorbent Block CMCS Aerogel
Chapter 9: Chemical Materials
Theoretical Study on the Isomerization Reaction Mechanism of the Chain-Isomers of N9H9
Controllable Preparation Cu2O/AC and Application in Photocatalytic Degradation of Organic Dyes
Polymerization and Chiroptical Behavior of Polymethacrylamides Bearing a Bulky Oxazoline Pendant
Preparation and Photocatalytic Performance Study of Na+/K+-WO3 by Ultrasonic Micro Method
Study on the Strengthening of Kraft Liner Board by the Application of Series WEC Cleaner Papermaking Chemicals
Synthesis and Crystal Structure of 4-[5-(2-Bromophenyl)-1,3,4-Thiadiazol-2-Ylthio]-2-(trifluoromethyl)thieno[2,3-d]pyrimidine
Experimental Study on the Effective Separation of Chromium-Iron Ions in Multi-Component Solution System by Ihleite Method
Preparation of Modified Polyurethane Fiber and Study of its Lead Ions Adsorption
Isothermal Crystallization Behavior and Kinetics of Poly (lactic acid) Filled with a Novel Nucleating Agent
Study on the Prepartion of Slag Haycite for Phosphorus Removal Using Ammonium Hydrogen Carbonate as Pore Former
Preparation and Characterization of Polyurethane Foams from Modified Rosin-Based Polyether Polyol
Synergistic Inhibition of Sodium Molybdate and Sodium Silicate on Carbon Steel in KCl Media
Chapter 10: Film Material
Magnesium Diboride Superconducting Films Synthesized by Different Electron-Beam Annealing Currents
Numerical Simulation of Film Thickness Uniformity Deposited by Planar Circular Magnetron Sputtering System
Effect of Cobalt Concentration on the Microstructure of Nickel-Cobalt Alloy Deposits
Electrochromic Properties of Co3O4/NiO Nanocomposite Films
Thermal Stability of Ultralow k Carbon-Bridged Periodic Mesoporous Organosilica Film
Study on Preparation of SnO2 Polyacrylate Thermal Insulation Film with Liquid Phase Precipitation Process
Investigation of the Preparation of Anodized Nanoporous Alumina Array
Morphology and Orientation in Thin Film of Polystyrene-b-Polylactide Prepared by Solution-Casting
Biofilm-Electrode Process for Nitrate Removal from Micro-Polluted Water
Effective Anisotropy Constant of Bilayer Film
Characterization of TiO2 Thin Films Prepared by Vacuum Evaporation
Chapter 11: Building Materials
Influence of Calcium Carbonate Powder on Water Requirement and Flowability of Self-Compacting Mortar Incorporating Bagasse Ash
Development of Reinforced Structure Designed Composite Pavement
Design and Experiment on the Road Pavement for Rush to Repair
Usage of Steel Slag in Concrete as Coarse Aggregates
Usability of Fly Ashes from Czech Republic for Sintered Artificial Aggregate
Effect of Surface Modification of Steel Fiber on Concrete Comprehensive Performance
Experimental Study of Compression and Carbonation in Concrete Subjected to Freeze-Thaw Environment
Effect of Coconut Coir Uniformity on Strength of Unfired Soil Lime Bricks
Size Effect on Mechanical Properties of LVL
Influence of the Organic and Mineral Additions in the Porosity of Lime Mortars
Research on the Mix Design of Cement Asphalt Concrete
Effects of Artificial Silica Fume on Compressive Strength and Workability of Self-Compacting Concrete
Experimental Research on the Impact Damage of Composite Laminates at Different Energies
Chapter 12: Materials Mechanical Behavior and Fracture
Deposition Effects on the Ultimate Strength of Tungsten Alloy
Study on the Strength Properties of Superior Shoes Board and Furnish
A Comparative Study on the Performance of Domestic Cellulose Based Pressboards for Use in Transformers
Model of Equal-Stressed Cylinder Based on the Mohr Failure Criterion
Fatigue Properties of Titanium Alloy TA11 under Multiaxial Loadings with Tension - Bending Vibration
Study of Damage and Acoustic Emission Properties of Rocks under Uniaxial Cyclic Load-Unload
Effect of Consolidation with Alanine and Glutaraldehyde on the Properties of Fragile Wool Fabrics
The Influence of Temperature and Load on Dry Sliding Wear and Friction Property of Low Metallic Friction Material
Study on the Mechanical Property of Nomex Fiber in Different Temperature
Analysis of Hot Oil Pipeline Stress Influencing Factors
Laboratory Investigation on Mechanical Behavior of Artificial Ice under Triaxial Compression
Formulation of Equivalent Plastic Strain Accumulated in Rotating Bending Process of Metal Tubes for Severe Plastic Deformation
Study on Development of Hemp Stem-Based Panel
Optimization of Superior Shoes Board Immersion Condition
The HAM Solutions for Unsteady Boundary Layer Flow and Heat Transfer with Heat Source/Sink
Influence of Vibration Stress Relief (VSR) on the Residual Stress and Microstructure in Welded Plate of DH36 Low Alloy High Strength Steel
Chapter 13: Materials Physics and Chemistry
The Way of Obtain C3H4O+ Fragments Laser-Induced by Cycloheptanone IonExcited State
The Pressure of CO2 Crystal Melting Temperature Dependence
The Thermal Decomposition Characteristics of Sodium Pyroxenite Gangue in Baiyunebo Iron Ore
Corrosion Characteristics of Grounding Grid in Resistance-Reducing Agents
Kinetics of Rubber-Modified Nylon 6
Research on the Kinetics of Nylon Polymerized by Caprolactam Anionic Polymerization Using Adiabatic Method
Skyrmion Excitations in Graphene
First-Principles Calculation of the Vacancy Formation Energy in VC
Antiplane Response of Cylindrical Inclusion with Eccentric Crack to Incident SH Waves
The Characteristic Dissolution and Physical Chemistry Parameter of Synthetic Pyromorphite
Mathematical Simulation and Experimental Investigation of Propranolol Hydrochloride Loading/releasing from Ion Exchange Fibers
Study of Selected Characteristics of a Dry Cell Hydrogen Generator in Conditions of Long Term Operation
An Easy Route for the Preparation of Soluble High Molecular Weight Polymer Under Friedel-Crafts Conditions
Pyrolysis Characteristics of Blends from Coal and Polyethylene
The Correction Factor in Elastic Modulus Determining by Indentation
Shadowgraph of Pulse CO2 Laser Induced Breakdown in Different Pressure Air
Thermal Decomposition of Phosphate Ore by Using Differential Scanning Calorimetric Method
Chapter 14: Selection, Testing and Evaluation of Materials
A Material Selection Method Based on Finite Element Method
Research on the Regular between Concentration of Superfine Powder Extinguishing Agent Explosion Scatter and Fire-Extinguishing Ability
The Affecting Gene Research of Metal Sheet Drawing Force on Compensate Fuzzy Nerve Net Control
The Study on the Pipe Retracting Shape Parameter Identify of Quantum and Immunity Algorithm
Parameters Identification of Johnson-Cook Constitutive Equation for Aluminum Brass
Quality Control of Materials in Pressure Pipeline during the Installation
Application of Distribution of Oxygen Coefficient in Explosive Neutron Detection
Research and Manufacture of Tea-Cigarette
Fatigue Propagation Life Evaluating for Materials or Components Suffered Load Spectrum by Quantitative Fractography
Chapter 15: Surface Engineering / Coatings Technology
Studies of Surface Roughening for Sapphire Substrate
Review of Conductive Coating and its Application in Power Grounding System
Design of a Simple and Demountable Experimental Device for Drag Reduction of Super Hydrophobic Surface
Characterization of Microstructure, Phase Composition and Corrosion Resistance of Al-Zn-Si-RE Waterborne Coatings
The Application and Analysis of EDM on the Surface Light Trapping Structure
Characteristics of Inconel 718 Filler Metal Affecting to Welding Metal Zones of Cast Steel for Piston Crown Material
Study on Macroscopic Morphology and Microstructure of Single Ni60 Laser Clad Tracks Prepared Using a Variable Laser Beam Shaper
Comparison of Surface Properties of TiN and TiAlN Coating Prepared by Arc Ion Plating for the Improvement of Life-Time Extension of Tool Steel
Surface Roughness Study of Milled Carbon Fiber Reinforced Polymer (CFRP) Composite Using 4 mm 2-Flute Titanium Aluminum Nitride (TiAlN) Coated Carbide End Mills
Study on the Fractal Behavior and Fractal Characterization of Guide Way Joint Surface
Effect of Ca2+ on Structure and Corrosion Resistance of Conversion Coating Formed on Cast AZ91D Magnesium Alloys
Surface Modification of Titanium and its Alloys for Biomedical Application
Temperature Field Simulation of Laser Heated 1045 Steel Using with Shaped Laser Beam Profiles
Chapter 16: Material Forming
Temperature Controlling System Design of Non-Isothermal Deep Drawing Mould for Magnesium Alloy Sheet
Study on Micro Hydroforming of Metals
Application of Mass Scaling Technology in Steel Tube Rolling by Finite Element Simulation
The Research on the Simulation Metal Flow in Forging of Bevel Gears
Multi-Objective Optimization and Research of Hot Stamping Process Parameters
Microstructure Analysis on GMAW Additive Manufacturing Parts Constrained by Electromagnetism
Mini-Thixoforming of High-Alloyed CPM REX 121 Steel
Characterization of Hot Deformation Behavior of Udimet720Li Superalloy Using Processing Map
The Research on Penetration of New Annular MEFP
Chapter 17: Material Machining
Extracting Acoustic Emission Signal Feature of Grinding Processing
Two-Step Identification of Instantaneous Cutting Force Coefficients and Cutter Runout
Experimental Research of Workpiece Temperature in Orthogonal Turn-Milling Compound Machining
Cutting Force Model for Heat Assisted Titanium Alloy Milling
Optimization of Cutting Conditions of YG15 on Finish Cutting in WEDM Based on Taguchi Method
The Effect of Cutting Process Parameters on the Stability in Milling
Cutting Performance of TiB2/WC/h-BN Micro/nano Composite Gradient Self-Lubricating Ceramic Tool when Machining Carbon Steel
Combined Atomistic-Continuum Modeling of Nano-EDM Process
Influence on BTA Boring Bar Transverse Vibration Considering Inner Cutting Fluid Velocity and Axial Force
Directly Manufacturing Table Tennis Mould by Hybrid Plasma Deposition & Milling
The Straightening Scheme Analysis for the Copper-Clad Steel Tube
Effect of Alumina Bubbles on Mechanical Properties and Microstructure of Metal Bond for Superabrasive Grinding Wheels
Germanium Crystal Anisotropy Affecting to Cutting Force in SPDT
The Cutting Parameter Affecting to Surface Roughness in Single-Point Diamond Turning
Fast Prediction Model for Closure Pressure in Hot Isostatic Pressing
Numerical Simulation of the Orthogonal Cutting of Carbon Fiber Reinforced Composite Material
Powder Particles Grinder Mechanism Design and Exploration Tool
Chapter 18: Welding and Joining
Kinematics Analysis of a 6-DOF Riveting Manipulator Based on ADAMS
A Performance Study on Self-Piercing Riveting and Adhesive Hybrid Joints of Different Adhesive
A Performance Study of Clinched Joints with Different Material
Application of the Laser Welding Technique in Aircraft Repair
Microstructure and Hardness of Friction Welded SSM 356 Aluminium Alloy
Numerical Simulation of Temperature Fields by Welding of Ti-Al Alloys Applying Volumetric Heat Source
Topology Optimization and Robust Analysis of Welding Spot Layout for a Heavy Duty Truck Cab Based on Element Strain Energy Density
Study on Arc and Drop Transfer Behaviors of DCEN MAG Welding
Evaluation of Welding Metal Zones in the Case Welded with 0.5 Mo Filler Metal to Forged Steel for Piston Crown Material
Effect of Heat Treatments on Microstructure and Mechanical Properties of Low Carbon Steel Pipes Welded by Induction Process
Chapter 19: Materials Processing Technologies
Numerical Simulation on Stress Field in Inside-Beam Laser Cladding
The Research on Ceramic Friction and Flow Stress of Plastic Forming
6D Laser Measurement System Based on Double Longitudinal Modes Laser
Influence of High Energy Ball Mill Technology on Cube Texture Formation of Ni-8at.%W Alloy Substrates for YBCO-Coated Conductors
The Effect of Electromagnetic Pulse Treatment on Thin - Wall Bearing Ferrules Dimensional Accuracy
Multi-Objective Optimization for Rolling Schedule of High Strength Sheet Based on ACPSO
The Grey Relation Analysis of Hemp Fiber Fineness and Chemical Composition after Plasma Assisted Degumming
「Nielsen BookData」 より
