11th International Fatigue Congress : selected, peer reviewed papers from the 11th International Fatigue Congress 2014, March 2-7, 2014, Melbourne, Australia

著者

• International Fatigue Congress
• Clark, Graham
• Wang, Chun H.

書誌事項

11th International Fatigue Congress : selected, peer reviewed papers from the 11th International Fatigue Congress 2014, March 2-7, 2014, Melbourne, Australia

edited by Graham Clark and Chun H. Wang

（Advanced materials research, v. 891-892）

Trans Tech Publications, c2014

• : [set]
• Part 1
• Part 2

タイトル別名

FATIGUE 2014

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). Collection of Selected, Peer Reviewed Papers from the 11th International Fatigue Congress 2014, March 2-7, 2014, Melbourne, Australia. The 282 papers are grouped as follows: I. Biomaterials, II. Case Studies and Industrial Applications, III. Case studies, Materials and Processes, IV. Civil and Mining Structures, V. Composites, VI. Corrosion and Fatigue, VII. Crack Closure and Shielding, VIII. Crack Growth Thresholds, IX. Creep-Fatigue, X. Cyclic Deformation and Crack Initiation, XI. Damage Evaluation and Fatigue Design, XII. Damage Tolerance/Aging Aircraft, XIII. Experimental Techniques, XIV. Fatigue Life Enhancement, XV. Fatigue Life Prediction and Test, XVI. Fatigue Modelling and Simulation, XVII. Fatigue of Coatings, XVIII. Fracture Processes and Fatigue in Rocks, XIX. Fretting and Contact Fatigue, XX. Growth of Short and Long Cracks, XXI. Laser Shock Peening, XXII. Life Prediction Methodology and Software Development, XXIII. Management of Fatigue and Reliability, XXIV. Microstructural Aspects, XXV. New Materials (MMCs, CMCs, Intermetallics, Hybrid Materials), XXVI. Rail Transport, XXVII. Reliability Analysis, XXVIII. Residual Stresses and Fatigue, XXIX. Structural Health Monitoring and Prognostics, XXX. Thermomechanical Fatigue, XXXI. Variable Amplitude Loads, Multiaxial and Mixed Mode Fatigue, XXXII. Very-High-Cycle Fatigue, XXXIII. Welding, Casting and Other Manufaturing Technologies, XXXIV. Poster

目次

• Foreword and Congress Committees I. Biomaterials Molecular Dynamics Investigation on Shearing between Osteopontin and Hydroxyapatite in Biological Materials Nanostructure and Fatigue Behavior of -Type Titanium Alloy Subjected to High-Pressure Torsion after Aging Treatment II. Case Studies and Industrial Applications Analysis and Design of Offshore Pile Foundation Offshore Pile Foundation Subjected to Lateral Cyclic Load in Layered Soil Fatigue Strength of Machined and Shot Peened Grey Cast Iron On Thermo-Hydro-Mechanical (THM) Fatigue Damage of Historical Stone Buildings Effect of Thermal Cycling on the Mechanical Properties of a Continuous Fibre Composite Used for Car Clutch Facings The Role of Surface Topography on Fatigue Behaviour of Nickel Based Superalloys Failure Analysis to Blades of Steam Turbines at Normal Conditions of Operations and Resonance Failure Analysis of Repeat Tooth Breakage of a 40MW Steam Turbine Load Gearbox III. Case Studies, Materials and Processes Fatigue of Cold Expanded Open Hole Coupons with Pre-Existing Cracks A Fractographic Investigation of a Failed Precombustion Chamber Nozzle from a Large Marine Diesel Engine Case Studies of Fatigue Failures in Defence Aircraft Components The Influence of Corrosion Pits and Cold Expanded Fastener Holes on the Fatigue Life Aluminium 7075-T651 An Investigation of the Extent of Crack Closure for Crack Growth in an Aluminium Alloy Effect of Load Spectra and Stress Magnitude on Crack Growth Behavior Variability from Typical Manufacturing Defects A Brief History of Structural Fatigue Testing at Fishermans Bend Australia Fatigue Life Improvement of Laser Clad 7075 Aluminium Alloy by Deep Surface Rolling Technique IV. Civil and Mining Structures Fatigue Assessment of Large Thin-Walled Structures with Initial Distortions Retrofitting for Fatigue Cracks at Connection between the Main Girder Web and Lateral Girder Flange Using the Bolting-Stop-Hole Method with Attached Plates A Self-Heating Approach to Characterize Anisotropy Effects in Fatigue Behaviour: Application to a Nineteenth Century Puddled Iron from a French Railway Bridge Evaluation of Bonding between High Modulus CFRP Sheet and Steel after Environmental Exposure and Fatigue Loading Improved Fatigue Life Assessment of Lighting Poles V. Composites A Brief Review of Fatigue Strengthening of Metallic Structures in Civil Engineering Using Fibre Reinforced Polymers Stiffness Based Fatigue Characterisation of CFRP Fatigue Crack Growth Rate in Mode I of a Carbon Fiber 5HS Weave Composite Laminate Processed via RTM The Influence of Orthotropy and Taper Angle on the Compressive Strength of Composite Laminates with Scarfed Holes Notched Fatigue Behavior under Multiaxial Stress States Effect of Disbonds on the Fatigue Endurance of Composite Scarf Joints Delamination Fatigue Properties of Z-Pinned Composites VI. Corrosion and Fatigue Standardized Test Method for Corrosion Pit-to-Fatigue Crack Transition for AA7075-T651 Aluminum Alloy Effects of Waveform and Cycle Period on Corrosion-Fatigue Crack Growth in Cathodically Protected High-Strength Steels Influence of Load Signal Form and Variable Amplitude Loading on the Corrosion Fatigue Behaviour of Aluminium Alloys The Effect of Ralstonia pickettii on Environmental Fatigue Crack Growth of 7xxx Series Aluminum Alloys The Effect of Corrosion Inhibitors on Environmental Fatigue Crack Growth in Al-Zn-Mg-Cu Experimental and Modeling Study of the Effect of Corrosion Pitting on Fatigue Failure Locations in Aircraft Components A Model for Predicting the Stress Concentration of Intergranular Corrosion around a Fastener Hole Corrosion-Fatigue Crack Growth in Age-Hardened Al Alloys: Examples of Failures and Explanations for Fractographic Observations An Extended Finite Element Model Coupled with Level Set Method for Stable Pitting Corrosion Managing Fatigue from Corrosion Pits in Aircraft Structures Corrosion Fatigue Behaviour of a Common AZ91D Magnesium Alloy in Modified Simulated Body Fluid Three Ways of Sampling and Fatigue Test Results of Steel P92 Effect of Environmental Corrosion on Fatigue Crack Growth Morphology: A Detailed Investigation of the Boundary between Fatigue and Corrosion Control Regimes VII. Crack Closure and Shielding The Explanation of Stress Ratio Effect and Crack Opening Corrections for Fatigue Crack Growth in Metallic Materials 3D Numerical Study on how the Local Effective Stress Intensity Factor Range Can Explain the Fatigue Crack Front Shape Influence of Martensitic Phase on Microcrack Propagation in a Ferritic-Martensitic Steel Experimental and Numerical Simulation Study of Plasticity-Induced and Roughness-Induced Fatigue Crack Closure Micro Fatigue Crack Propagation Behavior in a Duplex Stainless Steel Studied Using In Situ SEM/EBSD Method Fatigue Crack Closure due to Surface Roughness and Plastic Deformation VIII. Crack Growth Thresholds Fatigue Crack Growth Behavior in the Threshold Region Crack Growth Threshold Criterion Based on Calculation of Dynamic Stress Intensity Factors in the Mixed Mode (Complex Functions Theory Approach) Influence of the Inclusion Type on the Threshold Value of Failure in the VHCF-Regime of High-Strength Steels Comparison of SGBEM-FEM Alternating Method and XFEM Method for Determining Stress Intensity Factor for 2D Crack Problems Influence of Crack Retardation on Fatigue Crack Propagation in Steels for Railway Axles Investigations on the Fatigue Crack Propagation Threshold in Very High Cycle Fatigue IX. Creep-Fatigue J-Integral Approach to Creep-Fatigue Crack Propagation in Lead-Free Solder under Various Loading Waveforms Determination of Creep Crack Growth Threshold by Experiments under Elevated Temperature with Pre-Stressed Specimens Low Cycle Fatigue Behavior and Mechanism of Newly Developed Advanced Heat Resistant Austenitic Stainless Steels at High Temperature Low Cycle Fatigue and Creep-Fatigue Interaction Behaviour of Reduced Activation Ferritic Martensitic (RAFM) Steels with Varying W and Ta Contents X. Cyclic Deformation and Crack Initiation Cyclic Deformation of Rare-Earth Containing Magnesium Alloys Fatigue Behaviour of AZ91 Magnesium Alloy in as-Cast and Severe Plastic Deformed Conditions Fatigue of Austenitic High Interstitial Steels - The Role of N and C Damage Evaluation of Ferrite and Ferrite-Pearlite Steel during Fatigue Crack Initiation by EBSD Low-Cycle Fatigue Behaviour of a Ni-Based Single-Crystal Superalloy Low-Cycle Fatigue Crack Growth in Ti-6242 at Elevated Temperature Fatigue Behavior of Ultrafine Grained Medium Carbon Steel with Different Carbide Morphologies Processed by High Pressure Torsion Period of Fine Granular Area Formation of Bearing Steel in Very High Cycle Fatigue Regime Effect of Geometry and Distribution of Inclusions on the VHCF Properties of a Metastable Austenitic Stainless Steel Experimental Investigations and Damage Calculations of a Load Time History in the Very High Cycle Fatigue Cyclic Slip Localization and Crack Initiation in Crystalline Materials Identifying the Effect of 475 DegreesC Embrittlement on the Cyclic Stress-Strain Response of Duplex Stainless Steel by Means of the Change in the Yield Stress Distribution Influence of Surface Morphology on the Fatigue Behavior of Metastable Austenitic Steel Cyclic Deformation Response of Polycrystalline OFHC Copper under Pure Compression Fatigue Fatigue Behavior of Precipitation Hardening Alloys in the LCF and VHCF Regime Investigation of the Three-Dimensional Shape of Slip Bands in Fatigued Dual Phase Steel Mutual Interaction between Fatigue Crack Initiation/Propagation and Microstructural Features in Cast Aluminum Alloys Experimental and Theoretical Study of the Performance of Reinforced Concrete Specimen Subjected to Cyclic Loading and Aggressive Environment Unifying Monotonic and Hysteresis Material Properties for Notch Plasticity Analysis under Variable Amplitude Loads Low Cycle Fatigue Behaviour of a Turbine Blade Made of Nickel Base Wrought Alloy Fatigue Life Analysis of Specimens Subjected to Infrequent Severe Loading Using a Nonlinear Kinematic Hardening Cyclic Plasticity Model An Overview of the Fatigue of Polychloroprene Rubber AFM and FIB Study of Cyclic Strain Localization and Surface Relief Evolution in Fatigued f.c.c. Polycrystals In Situ Study of the Mechanisms of High Temperature Damage in Elastic-Plastic Cyclic Loading of Nickel Superalloy Very High Cycle Fatigue in Pulsed High Power Spallation Neutron Source Simulation of Surface Crack Initiation Induced by Slip Localization and Point Defect Kinetics XI. Damage Evaluation and Fatigue Design Fatigue Monitoring of Double Surface Defects Using PZT Based Electromechanical Impedance and Digital Image Correlation Methods Effect of Stress Ratio and Loading Mode on High Cycle Fatigue Properties of Extruded Magnesium Alloys Fatigue Crack Propagation Limit Curves for High Strength Steels and their Application for Engineering Critical Assessment Calculations Titanium Alloy Developments For Future Fan Disc Applications - The Fatigue Response of "Alloy 104" High-Cycle Fatigue Properties of Carbon Steel and Work-Hardened Oxygen Free Copper in High Pressure Hydrogen Investigation of Fatigue Crack Acceleration under Variable Amplitude Loading for a Structural Steel and Aluminium Alloy Fatigue Analysis and Design of Composite-Metal Joints in Primary Aircraft Structures Nondestructive Evaluation of Mechanically Loaded Advanced Marine Composite Structures Evaluation of Fatigue Damage by Diffraction Contrast Tomography Using Synchrotron Radiation Experimental Study of Relationship between Energy Dissipation and Fatigue Damage from Observation of Slip Band by Atomic Force Microscope XII. Damage Tolerance/Aging Aircraft Optimization of Numerical Analyses for Maintenance of Fuselage Skins with Rectangular Repairs Residual Fatigue Properties of a 2024-T351 Aluminium Alloy from the Teardown of AIRBUS A320 Wing Panels after Service Effects of Bonded Crack Retarders on Fatigue Parameters of FSWed Integral Panel Comparison of Tensile and Compressive Creep-Fatigue Damage Behavior of Cellular Composites XIII. Experimental Techniques Thermal Cycling Fatigue of Thermal Barrier Coatings - Rig and Experiment Design XIV. Fatigue Life Enhancement Effect of Ultrasonic Shot Peening on the Fatigue Strength of Stainless Cast Steel ASTM CA6NM for Hydraulic Turbine Runner Development of Low Temperature Nitriding Process and its Effects on the 4-Points Bending Fatigue Properties of Commercially Pure Titanium Improvement of Fatigue Properties in a Cast Aluminum Alloy by Roller Burnishing and Friction Stir Processing Influence of Shot Peening on the Fatigue Strength of Custom 465 Stainless Steel for Aeronautic Application Nitriding Effect on Corrosion Fatigue Strength of Low Alloy Steel in 1% HCl Aqueous Solution Hole Cold Expansion the Fatigue Mitigation Game Changer of the Past 50 Years XV. Fatigue Life Prediction and Test Fractographic Study on the Use of Rainflow Counting for Small and Long Cracks in AA7050 F-35 Full Scale Durability Modeling and Test Development of CGAP for Fatigue Damage and Crack Growth Analysis: Verification, Validation and Examples of Application Analysis of Black Hawk Main Transmission Support Beam In-Service Fatigue Crack Helicopter Airframe Fatigue Spectra Truncation and Verification Helicopter Airframe Fatigue Spectra Generation Probabilistic Vibration Analysis of a Mistuned Integrally Bladed Disk A Modified Compliance Method for Automatically Measuring Fatigue Crack Growth In Situ during Spectrum Fatigue Testing Life Extension of F/A-18 LAU-7 Missile Launcher Housings Using Rework Shape Optimisation XVI. Fatigue Modelling and Simulation Development of New Fatigue Model for New Zealand Dense Graded Hot Mix Asphalts Experimental Study on the Multistage Strength Degradation and the Associated Strain Energy Variation of S25C Modelling of Fatigue Crack Growth in Inconel 718 under Hold Time Conditions - Application to a Flight Spectrum A Cohesive Zone Model to Simulate Fatigue Crack Propagation under High Pressure Gaseous Hydrogen Rainflow-on-the-Fly Methodology: Fatigue-Crack Growth under Aircraft Spectrum Loading Numerical Simulation of Fatigue Crack Growth Rate and Crack Retardation due to an Overload Using a Cohesive Zone Model Stress Intensity Factor Solutions for Narrow Plates A Probabilistic Two-Scale Approach to Predict the High Cycle Fatigue Behaviour of Ti-Al6-V4 Parts Machined by High Pressure Water Jet Assisted Turning A Deviatoric Stress-Strain Function for Fatigue Life Analysis Fatigue Assessment of Existing Shiploaders Constitutive Modeling for Cyclic Behavior of AZ31B Magnesium Alloy and its Application The Effect of the Microstructure and Defects on Crack Initiation in 316L Stainless Steel under Multiaxial High Cycle Fatigue The Energy Based Approach to Fatigue Assessing Structural Safety of Bolted Joints Subject to Cyclic Loading Using Advanced Nonlinear FEA Physically-Based Simulations of the Cyclic Behavior of FCC Polycrystals XVII. Fatigue of Coatings Influence of HVOF Coating on the Fatigue Strength of 15-5 PH Stainless Steel Effect of Thermal Barrier Coating on Low Cycle Fatigue Behavior of Cast Inconel 713LC at 900 DegreesC Fatigue Crack Development in Epoxy Coatings on Steel Substrate: The Role of Coating and Substrate Properties in Determination of the Onset of Fatigue Cracks XVIII. Fracture Processes and Fatigue in Rocks Dependence of Static Fatigue Tests on Experimental Configuration for a Crystalline Rock Large-Scale Deformation Patterning in Geomaterials Associated with Grain Rotation The Cyclic Loading as a Result of the Stick-Slip Motion The Fracture Characteristic of Mode III Rock Crack under Different Temperature XIX. Fretting and Contact Fatigue Reduction in Fretting Fatigue Strength of Austenitic Stainless Steels due to Internal Hydrogen Fretting Fatigue Behavior of Titanium Alloy Coated with Functionally Graded Ti/TiN Film Fatigue Stress Ratio Effect on Fretting-Fatigue Crack Nucleation: Comparison between Multi-Axial and Uni-Axial Predictions XX. Growth of Short and Long Cracks Description of Small Fatigue Crack Propagation in ODS Steel Fatigue Crack Propagation Behavior of AZ61 Magnesium Alloy under Controlled Cathodic Potential Investigation of Fatigue Crack Propagation in Nickel Superalloy Using Diffraction Contrast Tomography and Phase Contrast Tomography Calculating the Resistance of a Grain Boundary against Fatigue Crack Growth Thermographic Investigation of Fatigue Crack Propagation in a High-Alloyed Steel Effect of Hydrogen Gas on the Growth of Small Fatigue Crack in JIS-SCM435 The Effect of Crack Growth Retardation when Comparing Constant Amplitude to Variable Amplitude Loading in an Aluminium Alloy Fatigue Lifetime and Crack Growth Behavior of WC-Co Cemented Carbide Fatigue Crack Growth in a Precipitation-Hardened Martensitic Stainless Steel: Influence of Ageing, Temperature and Loading History XXI. Laser Shock Peening Improvement in Fatigue Strength of Friction Stir Welded Aluminum Alloy Plates by Laser Peening Laser Shock Peening on a 6056-T4 Aluminium Alloy for Airframe Applications Fatigue Life Recovery via Laser Shock Peening in Mechanically Damaged Aluminium Sheet
• Experiments and Prediction Models Fatigue Crack Retardation in LSP and Sp Treated Aluminium Specimens Laser Shock Peening to Repair, Design and Manufacture Current and Future Aircraft Structures by Residual Stress Engineering XXII. Life Prediction Methodology and Software Development Fatigue Crack Growth and Coalescence Algorithm Starting from Multiple Surface Cracks Integrating Fatigue Crack Growth into Reliability Analysis and Computational Materials Design A New Progressive Curvilinear Strain Energy-Based Crack Growth Modeling Algorithm Using Multicomplex Variable Finite Elements Numerical Fatigue Analysis for Twin Roll Cast Magnesium Sheet Metal Structures High Temperature Multiaxial Creep-Fatigue Life Prediction for YH61 Nickel-Base Single Crystal Superalloy Anisotropic Life Prediction for Single Crystal Nickel-Base Flat Plate with a Hole XXIII. Management of Fatigue and Reliability Localized Fatigue Failure Analysis of Aluminium Crewboats due to Propeller Pulse Loads: A Case Study Bayesian Updating of Aircraft Risk Assessments Using Results of Inspection Structural Integrity - Yesterday - Today - Tomorrow Pseudo Fatigue Testing for Rapid Certification to Service Practical Application of Structural Repair Fatigue Life Determination on the AP-3C Orion Platform C-130H Centre Wing Lower Surface Tang Blend Repair Management QinetiQ Aircraft Structural Integrity Experience and Lessons Learnt Cost Effective Safety from Full System Teardowns XXIV. Microstructural Aspects Development of a Probabilistic Model for the Prediction of Fatigue Life in the Very High Cycle Fatigue (VHCF) Range Based on Inclusion Population Fatigue Crack Growth in Ultrafine-Grained Copper Obtained by ECAP Fatigue Behavior and Life Prediction of an Equiaxed Crystal Nickel-Base Superalloy under Different Dwell Times and Strain Ratios Study of the Effects of Two-Step Ageing Heat Treatment on Fatigue Crack Growth on an AA7050 Aluminum Alloy XXV. New Materials (MMCs, CMCs, Intermetallics, Hybrid Materials) Numerical Modeling of Graphene/Polymer Interfacial Behaviour Using Peel Test Fatigue of Ultra-Fine Grained -Brass Cyclic Deformation of a Modern TiAl Alloy at High Temperatures XXVI. Rail Transport Influence of Short Thermal Cracks on the Material Behaviour of a Railway Wheel Subjected to Repeated Rolling On Constitutive Models for Ratcheting of a High Strength Rail Steel Fretting Fatigue Testing of Carburized Alloy Steel in Very High Cycle Regime Using an Ultrasonic Torsional Fatigue Testing Machine On the Evaluation of the Stress State in Rail Head for Assessing Fatigue Resistance Fatigue in Railway Components - Understanding vs. Resolution Rail Bogie Structural Assurance Calculation of Critical Crack Size of Repair Welded Rail Fatigue Analysis of the Rail Underhead Radius under High Axle Load Conditions XXVII. Reliability Analysis Probabilistic Damage Tolerance Analysis for General Aviation Material Scatter in Crack Growth Rates of 7075-T7351 under Spectrum Loading XXVIII. Residual Stresses and Fatigue A Detailed Evaluation of the Effects of Bulk Residual Stress on Fatigue in Aluminum Fatigue Crack Growth Rate in Laser-Welded Web Core Sandwich Panels - Fatigue Crack Propagation in Welded Base Metal Repairing and Preserving Bridge and Steel Structure Using an Innovative Crack Arrest Repair System XXIX. Structural Health Monitoring and Prognostics Proposal of an Eigen-Strain Estimation for Determination of Residual Stresses Considering the Influence of Machining Influence of Cyclic Deformation Induced Phase Transformation on the Fatigue Behavior of the Austenitic Steel X6CrNiNb1810 Scattering of the Fundamental Symmetric Wave Mode Incident at a Defect on the Blind Side of a Weep Hole in an Isotropic Plate Preliminary Study on the Acoustic Emission Wave Velocity on Filament Wound Glass Fiber Reinforced Polymer Pipes and its Correspondence with the Winding Angle Scattering Phenomena of Edge Guided Waves at and around Notches Durability of Embedded PZTs in Structural Health Monitoring Systems under Cyclic Loading Endurance Testing of a Vibration Energy Harvester for Structural Health Monitoring Detection and Monitoring of Fatigue Cracks in Metallic Structures Using Acoustic Emission: Routes to Quantification of Probability of Detection XXX. Thermomechanical Fatigue Material Modelling and Lifetime Prediction of Ni-Base Gas Turbine Blades under TMF Conditions Modelling of TMF Crack Initiation in Smooth Single-Crystal Superalloy Specimens Investigation on Fatigue Crack Interaction with Grain Orientation during TMF Tests in Nickel-Base Superalloy Fatigue Crack Thresholds Significantly Affected by Thermo-Mechanical Loading Histories in an Austenitic and a Ferritic Low Alloy Steel Crack Growth of a Polycrystalline Nickel Alloy under TMF Loading Evaluation of Conventional Al 2024 Fatigue Limit in Fatigue Test Using Thermographic Measurement: Effect of Frequency Influence of Extremum Temperatures on TMF of a Ni-Base Superalloy Influence of the Strain Rate on the Low Cycle Fatigue Life of an Austenitic Stainless Steel with a Ground Surface Finish in Different Environments XXXI. Variable Amplitude Loads, Multiaxial and Mixed Mode Fatigue Specificity of Crack Initiation under Equibiaxial Fatigue: Development of a New Experimental Device Low Cycle and Multiaxial Fatigue Behavior of Three Al-Mg-Si Alloys High-Cycle Fatigue Behaviour of Pure Tantalum under Multiaxial and Variable Amplitude Loadings Accurate Prediction of Fatigue Life under Random Loading Experiments and Interpretations of some Load Interaction Phenomena in Fatigue Crack Growth Related to Compressive Loading A New Criterion for Evaluating Multiaxial Fatigue Damage under Multiaxial Random Loading Conditions AZ31 Magnesium Alloy Multiaxial LCF Behavior: Theory, Simulation and Experiments A Flexible HCF Modeling Framework Leading to a Probabilistic Multiaxial Kitagawa-Takahashi Diagram Fundamental Concepts for Formulating Fatigue Strength Diagrams of Notched Metals Fatigue Failure Life of SS400 Steel under Non-Proportional Loading in High Cycle Region Visualization of Multiaxial Stress/Strain State and Evaluation of Failure Life by Developed Analyzing Program under Non-Proportional Loading Fatigue Behaviour of Laser Beam Welded Circular Weld Seams under Multi-Axial Loading Notch Effects on Fatigue Behavior of Thermoplastics XXXII. Very-High-Cycle Fatigue High-Temperature Ultrasonic Fatigue Testing at 1000 DegreesC Initiation from Low Cycle Fatigue to Gigacycle Fatigue Partition of Cyclic Plasticity in an Austenitic-Ferritic Duplex Stainless Steel and its Significance for Fatigue Crack Initiation under High and Very High Cycle Fatigue Loading Conditions Influence of Frequency and Testing Technique on the Fatigue Behaviour of Quenched and Tempered Steel in the VHCF-Regime Formation Mechanism of Specific Fracture Surface Region in the Sub-Surface Fracture of Titanium Alloy XXXIII. Welding, Casting and Other Manufaturing Technologies Influence of Weld Imperfections on the Fatigue Behaviour of Resistance Spot Welded Advanced High Strength Steels On the Effect of Electrodischarge Drilling on the Fatigue Life of Inconel 718 Fatigue and Fatigue Crack Propagation of Laser Beam-Welded AA2198 Joints and Integral Structures Behaviour of Friction Stir Welded Joints Made out of Two Aluminium Alloys under Cyclic Loading Conditions Reduction in Fatigue Strength of Arc Welded Aluminium 5083-H111 on Immersion in NaCl Influence of Process-Related Defects on the Fatigue Behaviour of Welded Aluminium Joints at Very High Cycles Effect of Fine-Grained Microstructure Induced by Induction-Heating Fine Particle Peening Treatment on Fatigue Properties of Structural Steel (0.45%C) Fatigue Behaviour of Friction Stir Welded Steel Joints Role of Friction Stir Channel Geometry on the Fatigue Behaviour of AA5083-H111 at 120 DegreesC and 200 DegreesC Microstructure and Strain-Based Fatigue Life Approach for High-Performance Welds Comparison of High Cycle Fatigue in 4340 and 300M Steel Welded with Fiber Laser The Effectiveness of Design Procedures for Fatigue Design of Welds The Effect of Manufacturing Defects on the Fatigue Behaviour of Ti-6Al-4V Specimens Fabricated Using Selective Laser Melting Weld Toe SCF and Stress Distribution Parametric Equations for Tension (Membrane) Loading XXXIV. Poster Effects of Carbon Fibre Geogrid Reinforcement on Propagation of Cracking in Pavement and Augmentation of Flexible Pavement Life Influence of Heat Treatment on Fatigue Resistance of Electron Beam Welded Dissimilar Titanium Alloy Joints Rolling Contact Fatigue and Wear Behavior of Rail Steel under Dry Rolling-Sliding Contact Condition Groove Angles Influence on Mechanical and Microstructural Properties of P460N Steel in SMAW Three-Dimensional Porous Carbonate Apatite with Sufficient Mechanical Strength as a Bone Substitute Material Modeling Reliability of Critical Infrastructures with Application to Port Oil Transportation System Optimizing Reliability of Critical Infrastructures with Application to Port Oil Piping Transportation System Postponing Crack Nucleation in 2024 Aluminium Alloy by Dynamic Precipitation from the Supersaturated State Specimens for Simultaneous Mode II, III and II+III Fatigue Crack Propagation: Elasto-Plastic Solution of Crack Tip Stress-Strain Field Review on the Fatigue of Composite Hybrid Joints Used in Aircraft Structures A Review of Damage Tolerant Design, Certification and Repair in Metals Compared to Composite Materials Low-Cycle Fatigue Behavior of TWIP Steel - Effect of Grain Size Crystal Plasticity Finite Element Simulations of Polycrystalline Aluminium Alloy under Cyclic Loading Modelling the Effect of Particle Size Distribution in Multiphase Flows with Computational Fluid Dynamics and Physical Erosion Experiments Cyclic Deformation Behavior of a New N+C Alloying Austenitic Manganese Steel Lifetime Improvement of AlSi6Cu4 Cylinder Head Alloy Biaxial Specimen Design for Structures Subjected to Multi-Axial Loads A Study on Estimation of S-N Curves for Structural Steels Based on their Static Mechanical Properties Crack Growth Study of Dissimilar Steels (Stainless - Structural) Butt and Overlap Welded Unions under Cyclic Load On the Development of a Prediction Methodology for Crack Growth in Fibre Metal Laminates with MSD Scenario Effects of Long-Time Aging on Fatigue Crack Propagation Behaviors of a Hardworking Ni-Based Superalloy Non-Classical Solutions of Critical Rock Behavior Fatigue and Damage Tolerance of Aging Airplane Structures Finite Element Simulation of Stable Fatigue Crack Growth Using Critical CTOD Determined by Preliminary Finite Element Analysis Mechanics of Fatigue Crack Propagation in Submicron-Thick Freestanding Copper Films Fatigue and Damage Tolerance Substantiation Approach for a Regional Jet Analysis of the Fatigue Stress on Welded Joints of the U-Rib in an Orthotropic Steel Deck Evaluation of the Serviceability of the Transverse Joint of a Modular Bridge under a Cyclic Load Effect of Microscopic Structure on High-Cycle Fatigue Behavior in Nano-Components Plastic Slip and Early Stage of Fatigue Damage in Polycrystals: Comparison between Experiments and Crystal Plasticity Finite Elements Simulations Wavelet-Based Feature Extraction Algorithm for Fatigue Strain Data Associated with the k-Means Clustering Technique Fatigue Behavior and Surface Sensitivity of Board-Shaped Sample of Powder Metallurgy FGH 96 Prediction of Fatigue Crack Growth of Aged Hardening Al-Alloys under Variable Amplitude Loading Fatigue Behavior of Weld Repaired AISI 4130 Aeronautic Steel Used in Critical Flight Safety Structures Screw Dislocations Emitted from a Blunt Crack in a Piezoelectric Material Measurement and Simulation of Random Vibro-Impact Responses at Brake Guide Pins Fatigue Life Prediction for Caliper Guide Pin under Random Vibrational Loading Influence of Milling and Abrasive Waterjet Cutting on the Fatigue Behaviour of DP600 Steel Sheet High Cycle Fatigue Behavior and Microstructural Characterization of 6013-T4 Aluminum Alloy Laser Welded Joints Low Cycle Fatigue Estimation Based on the Critical Distance Stress Theory Peculiarities of Elastic Waves Generated by Fatigue Tensile Fractures Study of Fatigue Crack Growth in Al-Mg-Si Alloys Using a Predictive Model under Positive and Negative Load Ratios Numerical Analysis of the Effect of Slip Ratio on the Fatigue Crack Initiation Life in Rolling Contact Enhancement of Rolling Contact Wear and Fatigue Resistance of Wheel Steel by Laser Dispersed Treatment Modelling Fatigue Crack Growth Rates in Aluminium Plates Reinforced by Bonded Fibre-Metal Laminates for Fatigue Life Extension Effect of Incipient Heat Damage on the Fatigue Properties of Aircraft Composites Influence of Secondary Ageing on Fatigue Crack Propagation of the AA7050 Aluminum Alloy

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB16025599
• ISBN:
  • 9783038350088
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 2 v. (1840 p.)
• 大きさ: 24 cm
• 親書誌ID:
  • BA24926058