Binders and materials XI : selected, peer reviewed papers from the 11th International Conference on Binders and Materials 2013 (ICBM 2013), December 5, 2013, Brno, Czech Republic

Author(s)

    • International Conference on Binders and Materials
    • Dvořák, Karel
    • Gazdič, Dominik
    • Petránek, Vít
    • Hájková, Iveta
    • Magrla, Radek

Bibliographic Information

Binders and materials XI : selected, peer reviewed papers from the 11th International Conference on Binders and Materials 2013 (ICBM 2013), December 5, 2013, Brno, Czech Republic

edited by Karel Dvořák ... [et al.]

(Advanced materials research, v. 897)

Trans Tech Publications, c2014

  • : pbk

Available at  / 1 libraries

Search this Book/Journal

Note

Includes bibliographical references and indexes

Other editors: Dominik Gazdič, Vít Petránek, Iveta Hájková and Radek Magrla

Description and Table of Contents

Description

Collection of selected, peer reviewed papers from the 11th International Conference Binders and Materials 2013 (ICBM 2013), December 5, 2013, Brno, Czech Republic. The 72 papers are grouped as follows: Chapter 1: Cement and Binders Based on Cement, Chapter 2: Inorganic Binders, Chapter 3: Organic Binders, Chapter 4: Silicate Materials, Chapter 5: Building Materials, Chapter 6: Other Related Topics

Table of Contents

About ICBM and Committees Chapter 1: Cement and Binders Based on Cement Influence of Preparation Parameters on Properties of Belite Clinker Study of Increasing of Belite Reactivity Proposal and Testing Masonry Cement Testing Self-Levelling Floor Screeds on the Basis of Ternary Binder Thermoanalytical Study of Binders Containing Pozzolanic and Latent Hydraulic Materials Reduction of CO2 Emissions at Firing of Binders Type Portland Cement Sodium Hexametaphosphate as Deflocculation Agent for Calcium Aluminate Cements in Porcelain Body Influence of Different Grinding Types on Granulometry of Cement Grains Chapter 2: Inorganic Binders Performance of Fiber-Cement Boards in Biogenic Sulphate Environment Decorative Multi-Component Alkali Activated Cements for Restoration and Finishing Works Testing of Clay Used for Building a Folk House Replica by Traditional Techniques Industrial Resources for the Production of Sulphate Binders Efficiency of Sulphate Paste Liquefaction Influence of Grinding -Gypsum on its Final Property Preparation and Properties of Pressed Metakaolin and Fly Ash Based Alkali-Activated Binders Thermal Insulating Alkali-Activated Materials with Lightweight Aggregate Analysis of Possibility of Using Geopolymers in Rehabilitation of Reinforced Concrete Structures Modification of the Raw Mix for Firing of Dicalcium Silicate Using Potassium Sulphate Chapter 3: Organic Binders Repair of Composite Structure Using Cold Sleeve with Polymer Filling Material Properties of Polyurethane and Epoxy Modified Cementitious Hybrids for Flooring Systems The Behavior of the Advanced Materials for Blast Energy Absorption under Low and High Velocity Load The Influence of Silane Coupling Agent on Glued Spruce Wood Using Epoxy Adhesive Bitumen Substance Analysis Chapter 4: Silicate Materials Determination of Sintering Activity of Sodium-Potassium Feldspar Development of Advanced Masonry Structures with Utilization of Alternative Thermal Insulating Materials Physical-Mechanical Aspects of Preparing Thermal Insulation Materials on the Basis of Liquid (Water) Glass Possibilities of Reducing the Apparent Porosity of Silica Bricks for the Coke Batteries Pozzolanic Aktivity Increase of Recycled Glass Chapter 5: Building Materials Comparison of Impedance Spectra of Concrete Recorded with Utilizing Carbon Transition Paste Reactivity of Brick Powder in Lime Mortars To the Problems of Determination of Dynamic Elasticity Modules of Calcium Silicate Bricks by Means of Resonance Method Corrosion Inhibitors as a Prevention The Effect of Concrete Quality on the Acoustic Emission Parameters during Three-Point Bending Fracture Test Possibilities of Hydrophobization of Thermo-Insulating Materials Based on Natural Resources Influence of Contact Parameters on Load-Carrying Capacity of Hybrid Composite Cross-Section Reinforcement Corrosion versus Crack Width Study of Cement Composites Properties with Filler Based on Wood Pulp Chloride Diffusion in Limestone Cement Concrete Exposed to Combined Chloride and Sulfate Solutions at Low Temperature Effect of Metakaolin Sand on Properties of Cement Composites Comparison of the Values of Compressive Strength and Elasticity Modulus of Concrete of Frozen and Unfrozen Specimens Effect of Modification of Cement-Bonded Particleboards Composition on their Frost Resistance Basic and Hygric Properties of Concrete Containing Fine Ceramic Powder Fracture and Mechanical Properties of Fire Resistant Fibre Composites Containing Fine Ground Ceramic Powder Basic Characteristics of Green Cements of CEM V/A and V/B Kind Study of Influence of Fly Ash Character on its Behaviour during Clinkering Process The Use of Industrial Waste as a Secondary Raw Material in Restoration Plaster with Thermal Insulating Effect Development of a New Kind of Aerated Screeds for Lightweight Floors Surface Morphology Study on Fibres Treated in Cold Plasma Discharge Study of Effect of Various Types of Cement on Properties of Cement Pastes Effect of High Proportion of Blended Cement in Concrete Study of Properties of Sprayed Concrete Prepared in Laboratory Use of Impact-Echo Method to Test High-Temperature Degraded Cementitious Composite Materials Containing Rubber Aggregates and Acrylic Polymer Binder Resistant Multilayer Floor Systems Based on Epoxy Binders with Recycled Various Glass Particles Possibilities of Recycled Concrete Aggregate in Cement-Based Flowscreed The Use of Cementation Process for Waste Industrial Sludge Solidification Sealing Layers on Concrete Bridge Decks Development of Resistant Coating Systems Based on Polymer Binders The Influence of Vacuum Mixing on the Porosity of Ultra High Performance Concrete Use of Blast Furnace Slag Cements for the Construction of a Canal Lock Rehydration of Ultra High Performance Concrete Perlite Concrete Based on Alkali Activated Cements Polypropylene Fibres and Micro Cracking in Fire Exposed Concrete Carbonation Depth vs. Physical-Mechanical Properties of Concretes with Alternative Additions of Concrete Recyclate and Silicate Admixtures Mixing of Different Particle-Size Fractions of Fly Ash to Increase its Activity in Cement Composites Autoclaving Time Influence on Fly Ash Aerated Concrete Compressive Strength and Microstructure Analysis of Building Stone of the Medieval Historical Building Polymer-Modified Mortars with Increased Amount of C-S-H Phase The External Thermal Insulation Material Made of Technical Hemp Application of Alternative Fillers in the Cement-Bonded Particleboards Structure Chapter 6: Other Related Topics Laboratory Verifying of Injection Screens Efficiency On Some Aspects of Application of Vegetative Roofs in Building Structures Identification of Thermal Conductivity of Powdery Insulation Materials

by "Nielsen BookData"

Related Books: 1-1 of 1

Details

  • NCID
    BB16355367
  • ISBN
    • 9783038350262
  • Country Code
    sz
  • Title Language Code
    eng
  • Text Language Code
    eng
  • Place of Publication
    Durnten-Zurich
  • Pages/Volumes
    xi, 346 p.
  • Size
    24 cm
  • Parent Bibliography ID
Page Top