Binders and materials XI : selected, peer reviewed papers from the 11th International Conference on Binders and Materials 2013 (ICBM 2013), December 5, 2013, Brno, Czech Republic
Author(s)
Bibliographic Information
Binders and materials XI : selected, peer reviewed papers from the 11th International Conference on Binders and Materials 2013 (ICBM 2013), December 5, 2013, Brno, Czech Republic
(Advanced materials research, v. 897)
Trans Tech Publications, c2014
- : pbk
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Other editors: Dominik Gazdič, Vít Petránek, Iveta Hájková and Radek Magrla
Description and Table of Contents
Description
Collection of selected, peer reviewed papers from the 11th International Conference Binders and Materials 2013 (ICBM 2013), December 5, 2013, Brno, Czech Republic.
The 72 papers are grouped as follows:
Chapter 1: Cement and Binders Based on Cement,
Chapter 2: Inorganic Binders,
Chapter 3: Organic Binders,
Chapter 4: Silicate Materials,
Chapter 5: Building Materials,
Chapter 6: Other Related Topics
Table of Contents
About ICBM and Committees
Chapter 1: Cement and Binders Based on Cement
Influence of Preparation Parameters on Properties of Belite Clinker
Study of Increasing of Belite Reactivity
Proposal and Testing Masonry Cement
Testing Self-Levelling Floor Screeds on the Basis of Ternary Binder
Thermoanalytical Study of Binders Containing Pozzolanic and Latent Hydraulic Materials
Reduction of CO2 Emissions at Firing of Binders Type Portland Cement
Sodium Hexametaphosphate as Deflocculation Agent for Calcium Aluminate Cements in Porcelain Body
Influence of Different Grinding Types on Granulometry of Cement Grains
Chapter 2: Inorganic Binders
Performance of Fiber-Cement Boards in Biogenic Sulphate Environment
Decorative Multi-Component Alkali Activated Cements for Restoration and Finishing Works
Testing of Clay Used for Building a Folk House Replica by Traditional Techniques
Industrial Resources for the Production of Sulphate Binders
Efficiency of Sulphate Paste Liquefaction
Influence of Grinding -Gypsum on its Final Property
Preparation and Properties of Pressed Metakaolin and Fly Ash Based Alkali-Activated Binders
Thermal Insulating Alkali-Activated Materials with Lightweight Aggregate
Analysis of Possibility of Using Geopolymers in Rehabilitation of Reinforced Concrete Structures
Modification of the Raw Mix for Firing of Dicalcium Silicate Using Potassium Sulphate
Chapter 3: Organic Binders
Repair of Composite Structure Using Cold Sleeve with Polymer Filling Material
Properties of Polyurethane and Epoxy Modified Cementitious Hybrids for Flooring Systems
The Behavior of the Advanced Materials for Blast Energy Absorption under Low and High Velocity Load
The Influence of Silane Coupling Agent on Glued Spruce Wood Using Epoxy Adhesive
Bitumen Substance Analysis
Chapter 4: Silicate Materials
Determination of Sintering Activity of Sodium-Potassium Feldspar
Development of Advanced Masonry Structures with Utilization of Alternative Thermal Insulating Materials
Physical-Mechanical Aspects of Preparing Thermal Insulation Materials on the Basis of Liquid (Water) Glass
Possibilities of Reducing the Apparent Porosity of Silica Bricks for the Coke Batteries
Pozzolanic Aktivity Increase of Recycled Glass
Chapter 5: Building Materials
Comparison of Impedance Spectra of Concrete Recorded with Utilizing Carbon Transition Paste
Reactivity of Brick Powder in Lime Mortars
To the Problems of Determination of Dynamic Elasticity Modules of Calcium Silicate Bricks by Means of Resonance Method
Corrosion Inhibitors as a Prevention
The Effect of Concrete Quality on the Acoustic Emission Parameters during Three-Point Bending Fracture Test
Possibilities of Hydrophobization of Thermo-Insulating Materials Based on Natural Resources
Influence of Contact Parameters on Load-Carrying Capacity of Hybrid Composite Cross-Section
Reinforcement Corrosion versus Crack Width
Study of Cement Composites Properties with Filler Based on Wood Pulp
Chloride Diffusion in Limestone Cement Concrete Exposed to Combined Chloride and Sulfate Solutions at Low Temperature
Effect of Metakaolin Sand on Properties of Cement Composites
Comparison of the Values of Compressive Strength and Elasticity Modulus of Concrete of Frozen and Unfrozen Specimens
Effect of Modification of Cement-Bonded Particleboards Composition on their Frost Resistance
Basic and Hygric Properties of Concrete Containing Fine Ceramic Powder
Fracture and Mechanical Properties of Fire Resistant Fibre Composites Containing Fine Ground Ceramic Powder
Basic Characteristics of Green Cements of CEM V/A and V/B Kind
Study of Influence of Fly Ash Character on its Behaviour during Clinkering Process
The Use of Industrial Waste as a Secondary Raw Material in Restoration Plaster with Thermal Insulating Effect
Development of a New Kind of Aerated Screeds for Lightweight Floors
Surface Morphology Study on Fibres Treated in Cold Plasma Discharge
Study of Effect of Various Types of Cement on Properties of Cement Pastes
Effect of High Proportion of Blended Cement in Concrete
Study of Properties of Sprayed Concrete Prepared in Laboratory
Use of Impact-Echo Method to Test High-Temperature Degraded Cementitious Composite Materials Containing Rubber Aggregates and Acrylic Polymer Binder
Resistant Multilayer Floor Systems Based on Epoxy Binders with Recycled Various Glass Particles
Possibilities of Recycled Concrete Aggregate in Cement-Based Flowscreed
The Use of Cementation Process for Waste Industrial Sludge Solidification
Sealing Layers on Concrete Bridge Decks
Development of Resistant Coating Systems Based on Polymer Binders
The Influence of Vacuum Mixing on the Porosity of Ultra High Performance Concrete
Use of Blast Furnace Slag Cements for the Construction of a Canal Lock
Rehydration of Ultra High Performance Concrete
Perlite Concrete Based on Alkali Activated Cements
Polypropylene Fibres and Micro Cracking in Fire Exposed Concrete
Carbonation Depth vs. Physical-Mechanical Properties of Concretes with Alternative Additions of Concrete Recyclate and Silicate Admixtures
Mixing of Different Particle-Size Fractions of Fly Ash to Increase its Activity in Cement Composites
Autoclaving Time Influence on Fly Ash Aerated Concrete Compressive Strength and Microstructure
Analysis of Building Stone of the Medieval Historical Building
Polymer-Modified Mortars with Increased Amount of C-S-H Phase
The External Thermal Insulation Material Made of Technical Hemp
Application of Alternative Fillers in the Cement-Bonded Particleboards Structure
Chapter 6: Other Related Topics
Laboratory Verifying of Injection Screens Efficiency
On Some Aspects of Application of Vegetative Roofs in Building Structures
Identification of Thermal Conductivity of Powdery Insulation Materials
by "Nielsen BookData"