EnviBUILD buildings and environment 2013 : selected, peer reviewed papers from the International Conference on EnviBUILD 2013, Buildings and Environment, October 17, 2013, Bratislava, Slovakia
Author(s)
Bibliographic Information
EnviBUILD buildings and environment 2013 : selected, peer reviewed papers from the International Conference on EnviBUILD 2013, Buildings and Environment, October 17, 2013, Bratislava, Slovakia
（Advanced materials research, v. 899）
Trans Tech Publications, c2014
- : pbk
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Collection of selected, peer reviewed papers from the EnviBUILD 2013, Buildings and Environment, October 17, 2013, Bratislava, Slovakia.
The 120 papers are grouped as follows:
Chapter 1: Energy Efficient Buildings,
Chapter 2: Heat Storage and Energy Savings,
Chapter 3: Integration of Renewable Energy sources,
Chapter 4: Effective Ventilation,
Chapter 5: Quality of Indoor Environment,
Chapter 6: Natural and Environmental Friendly Building Materials,
Chapter 7: Acoustic Design and Noise Protection,
Chapter 8: Fire Protection, Risk Analysis,
Chapter 9: Information Technologies in Building,
Chapter 10: Sustainable Development and Project Management in Building
Table of Contents
Preface
Chapter 1: Energy Efficient Buildings
Analysis of Energy and Internal Environment Improvements in a Single Family House
Application of BIM Process by the Evaluation of Building Energy Sustainability
Comparison of Simulated and Actual Energy Use of a Hospital Building in Austria
Energy Consumption and CO2 Emission of Buildings Built with Industrialized Technology: The Case of Debrecen and Future Trends
Evaluation of Energy Efficiency in Retrofitting Residential Buildings with Large-Panel Structures
Exergy Quality of Buildings
Indoor Environment and Energy Performance of Office Buildings Equipped with a Low Temperature Heating / High Temperature Cooling System
House in Passive Standard - Thermal Bridges
Interaction of New Physical-Energy Quantification of Buildings and Renewable Energy Sources as a Dominant Production Technology of Natural Capital
Nearly Zero-Energy Requirements and the Reference Buildings
The Effects of the Soils Thermal Field onto the Energy Performance of Buildings
Thermal Bridges Minimizing through Typical Details in Low Energy Designing
Thermal Bridges Minimizing through Window Jamb in Low Energy Buildings
Thermal Comfort in a Refurbished Low-Energy House: The OEKOHAUS Case Study
Total Solar Energy Transmittance vs. Dynamic Thermal Characteristics of Non-Transparent Building Components
Transformation Determinants of Existing Urban Hotels while Taking into Account all Aspects of Sustainable Development
Cost Optimality and/or Sustainability in our Building's Life
Optimization of Building Envelope Components Based on Life Cycle Environmental Impacts and Costs
Building Sector & Climate Change: The Case of Hungary
Chapter 2: Heat Storage and Energy Savings
Alternative Way of Thermal Protection by Thermal Barrier
Determination of Linear Thermal Transmittance for Curved Detail
Determining Cumulative Room Temperature under In Situ Conditions Using Combined Method
Energy Design by Evolution: Applying Evolutionary Computing to Energy Efficient Architectural Design
Experimental Measurements and Numerical Simulations of Dynamic Thermal Performance of External Timber Frame Wall
Hot Water Temperature Drop in a Pipe as a Parameter in Order to Define Operation Time of a Circulation Loop in Domestic Hot Water Distribution System
Impact of Fac ade Colouring on Temperature and Light Conditions of Buildings, Housing Estates, and Environment
Improvements of Energy Balance of Existing Residential Buildings
Low Energy Source Synthetic Thermal Energy Storage (STES)
Numerical Analysis and Measurement Results of a Window Sill
Optimization of Swimming Pool Hall's Envelope with Respect to Thermal and Moisture Design
Possibilities of Simulations in the Planning of the Retrofit of Historical Double Skin Windows
The Impact of the Choice of Computational Methods on the Results of Simulations of Specific Heat Consumption for Heating a Family House
The Influence of Construction Fillings of Building on Airtightness
The Influence of the Position of Windows on U Value
The Natural Physical Cavity Energy Regime of Double-Skin Facade
Thermal and Moisture Problems of Wooden Windows
Windows in Buildings - Diagnostics of Selected Properties after Time of Using
Wooden Window Structure and its Thermo-Humid Mode
Thermal Properties of Wooden Buildings in Relation to Computer Software
Chapter 3: Integration of Renewable Energy Sources
A Software Optimization of the Solar Energy System Performance
Comparison of Modelled Distribution of Thermal Fields at Seasonal Ground Storage Segments
Construction in the Trend of Sustainability_Wooden Houses with Integrated Photovoltaic Systems
Electricity Storage in Passive House in Central Europe Region
Evaluation of Possible Use of Foliage as a Fuel for Small Combustion Equipment
Photovoltaic Arrays on Flat Roofs - An Aspect of Yearly Energy Production
Chapter 4: Effective Ventilation
A New Type of Heat Exchanger for Ventilation in Buildings with Nearly-Zero Energy Consumption
CFD Model of an Underfloor Air Cavity Created from Special Fittings and its Verification Using a Laboratory Model
Comparison of the Impact of the Ventilation Ducts on Thermal Properties of the Exterior Walls
Experimental Verification of Air Quality in Primary Schools
Impact of the Installed Inlet Vent Flaps in the Window Structure on the Overall Aerodynamic Properties of the Window
Natural Ventilation and Forced Warm Air Ventilation in Offices
The Effect of Air Condition on Reduction of CO2 Concentration in Buildings in Family Houses
Chapter 5: Quality of Indoor Environment
Analysis of Summer Overheating in Elementary School Building
Architecture and the Internal Environment in the Current Office Buildings - Environmental Aspects
Case Study of Light Pollution in Urbanized Area of Slovakia
Colour of External Shading Obstacles and Circadian Stimulus of Indoor Daylighting
Comparative Study of Window Glazing Systems Influence on Melatonin Secretion in Patients in the Hospital Wards
Design as a Tool for Environmental Therapy in the Fight against Lifestyle Diseases
Design of Balcony from the Point of View of Daylighting
Design of School Environment in the 21st Century
EN Criteria for Evaluation of Daylight in Interiors
Evaluation of Thermal Environment and Indoor Air Quality in University Libraries in Vienna
Impact of the New CEN Minimum Illuminance Criterion on the Working Plane Size
Influence of Instantaneous Measured Data on Evaluation Interval of Daylighting
Interior Environment of the Buildings Hit by Floods
Shading by Surrounding Obstacles
Sunlight Penetration through Sloped Window Apertures
Thermal Stability of the Summer Period in Schoolrooms
Assessment of Daylighting Design Tools Against Test Cases Included in CIE's 171:2006 Report
Exploring the Contact Comfort within Complex Well-Being in Microenvironment
Chapter 6: Natural and Environmental Friendly Building Materials
Air-Tightness and Acoustic Properties of SuperAdobe System
Building Physical, Energetical and Hygrothermal Analysis of Earth-Sheltered Building Constructions
Calculation and Experimental Evaluation of the Thermal Resistance of a Structure with Reflective Insulation
Comparison of the Thermal Properties of Different Insulating Materials
Controlling and Testing of the Uneven Wall Surface
Correlation Relationships between Properties of Brick Body and their Use in Building Practice
Impact of Concrete Recycled Materials on some Properties of Concrete
Improving the Thermal Insulation Properties of Brick Products Using Chemical Additive Vuppor
Influence of Fluidized Fly Ash on the Selected Physical-Mechanical Properties of the Autoclaved Aerated Concrete
Microclimatic Effects of Green Facades in Urban Environment
Microorganism on the Fasades of Residential Panel Housing
Possibilities of Thermal Analysis for the Evaluation of Construction Materials
Risk Analysis of Asbestos Structures and their Impact on the Internal Environment of Buildings
Study of the Properties of the Environmentally Friendly Insulation Materials
The Assessment of the Refurbished Reinforced Concrete Buildings in Point of the Climate Change
The Transition of the Water Steam through the Composition of the Diffusive Closed Circumferential Wall of the Wooden House with the Proper and Improper Realization of Vapor Barrier
Thermal Properties of Selected Lightweight Wooden Walls and Windows in the Regime of Long Time Testing
Timber as Renewable Building Material and its Use in Modern Architecture
Timber - Traditional Material History or Vision in Architectural Design
Transient Pulse Method for Measuring of Heat Conductivity of Autoclaved Aerated Concrete
Ultra Thin Glass Membranes for Advanced Glazing of nZEB
Use of Multi-Criteria Optimization for Selection of Building Materials for Reconstruction
Application of Phase Change Materials to Reduce the Risk of Overheating of Building Interior
Chapter 7: Acoustic Design and Noise Protection
Door Bottom Joint Design and its Influence on Sound Transmission of the Door
Effect of Acoustic Pads' Different Dynamic Stiffness on the Reduction of Impact Sound Level
Influence of Double Transparent Facades on Acoustic Comfort at the Workplace
Mockup Investigation of Lightweight Timber Floor
Simulation of Different Acoustic Lecture Room Designs
Sound Insulation Properties of the Facade Elements - The Influence of Filling Cavities of Facade Elements on the Values of Laboratory Airborne Sound Insulation
The Dispersion of Acoustic Energy in the Dissemination from the Source
The Assessment of Sports Halls - The Analysis of Reverberation Time, Strength and Clarity
Chapter 8: Fire Protection, Risk Analysis
A Case Study of the Fire-Resistance of Traditional Brick Vaults
Application of Risk Analysis by the Evaluation of Buildings Indoor Environment
Assessment and Damage for Building Structures Risk Analysis Methods
Effects of Smoke on Evacuation
Fire Protection Aspects of Low-Energy Buildings
Fire Risk in Relation to BIM
Instruments for Risk Analysis as an Alternative Decision-Making Method in the Forensic Sciences
Internal Surface Temperatures Short-Term Measurement in the Selected Living Room with Fireplace
Risk Analysis of Steel Construction Projects Documentation Blast Furnaces
Utilization of Risk Analysis Methods in Decision-Making Process on Fitness of Rehabilitation
Chapter 9: Information Technologies in Building
BRESET - Remote Sensing Technology for Building Physics Research of Structures
BIM - The Process of Modern Civil Engineering
Possibilities and Problems in Applying Decision Support Systems for Special Challenges in the Design of Building Constructions
SEMERGY: Performance-Guided Building Design and Refurbishment within a Semantically Augmented Optimization Environment
Chapter 10: Sustainable Development and Project Management in Building
An Expert System for the Cost-Optimal Refurbishment of Buildings
Multi-Purpose Utilisation of Historic Building Glass Atrium - Case Study of the Slovak Philharmonic
The Concept of Minimalism in Sustainable Residential Buildings
The Idea of Modularity and Small Prefabrication of Low-Cost Housing Concepts
Utilization of the Construction Waste
by "Nielsen BookData"